Initial support for MPC8641 HPCN board.

1 files changed, 629 insertions, 0 deletions

diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h
new file mode 100644
index 0000000..8d2e088
--- /dev/null
+++ b/include/configs/MPC8641HPCN.h
@@ -0,0 +1,629 @@
+/*              
+ * Copyright 2004 Freescale Semiconductor.
+ * Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * mpc8641hpc3 board configuration file
+ *
+ *
+ * Make sure you change the MAC address and other network params first,
+ * search for CONFIG_ETHADDR, CONFIG_SERVERIP, etc in this file.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* High Level Configuration Options */
+#define CONFIG_MPC86xx		1	/* MPC86xx */
+#define CONFIG_MPC8641		1	/* MPC8641 specific */
+#define CONFIG_MPC8641HPCN	1	/* MPC8641HPCN board specific */
+#define CONFIG_NUM_CPUS         2       /* Number of CPUs in the system */
+#define CONFIG_LINUX_RESET_VEC  0x100   /* Reset vector used by Linux */
+#undef DEBUG                   
+
+//#define RUN_DIAG             1   
+#ifdef RUN_DIAG
+#define CFG_DIAG_ADDR        0xff800000
+#endif
+#define CFG_RESET_ADDRESS    0xfff00100
+
+//#define CONFIG_PCI
+#define CONFIG_TSEC_ENET 		/* tsec ethernet support */
+#define CONFIG_ENV_OVERWRITE
+/*#define CONFIG_DDR_ECC	*/		/* only for ECC DDR module */
+/*#define CONFIG_DDR_DLL	*/		/* possible DLL fix needed */
+#define CONFIG_DDR_2T_TIMING		/* Sets the 2T timing bit */
+
+
+#define CONFIG_DDR_ECC			/* only for ECC DDR module */
+#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER	/* DDR controller or DMA? */
+#define CONFIG_MEM_INIT_VALUE		0xDeadBeef
+
+
+#define CONFIG_ALTIVEC          1  
+/*-----------------------------------------------------------------------
+ * L2CR setup -- make sure this is right for your board!
+ */
+
+#define CFG_L2          
+#define L2_INIT		0
+#define L2_ENABLE	(L2CR_L2E)
+
+#ifndef CONFIG_SYS_CLK_FREQ
+//#define CONFIG_SYS_CLK_FREQ	33000000
+#define CONFIG_SYS_CLK_FREQ     get_board_sys_clk(0)
+#endif
+
+/*
+ * These can be toggled for performance analysis, otherwise use default.
+ */
+/* JB - XXX - Are these available on 86xx? */
+#define CONFIG_BTB			/* toggle branch predition */
+#define CONFIG_ADDR_STREAMING		/* toggle addr streaming */
+
+#define CONFIG_BOARD_EARLY_INIT_F	1	/* Call board_pre_init */
+
+#undef	CFG_DRAM_TEST			/* memory test, takes time */
+#define CFG_MEMTEST_START	0x00200000	/* memtest region */
+#define CFG_MEMTEST_END		0x00400000
+
+
+/*
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ */
+#define CFG_CCSRBAR_DEFAULT 	0xff700000	/* CCSRBAR Default */
+#define CFG_CCSRBAR		0xf8000000	/* relocated CCSRBAR */
+#define CFG_IMMR		CFG_CCSRBAR	/* PQII uses CFG_IMMR */
+
+
+/*
+ * DDR Setup
+ */
+#define CFG_DDR_SDRAM_BASE	0x00000000	/* DDR is system memory*/
+#define CFG_SDRAM_BASE		CFG_DDR_SDRAM_BASE
+
+#define MPC86xx_DDR_SDRAM_CLK_CNTL
+
+#if defined(CONFIG_SPD_EEPROM)
+    /*
+     * Determine DDR configuration from I2C interface.
+     */
+    #define SPD_EEPROM_ADDRESS	0x51		/* DDR DIMM */
+
+#else
+    /*
+     * Manually set up DDR parameters
+     */
+
+/* DDR I */
+#if 1
+    #define CFG_SDRAM_SIZE	256		/* DDR is 256MB */
+
+    #define CFG_DDR_CS0_BNDS	0x0000000F
+    #define CFG_DDR_CS0_CONFIG	0x80010102      /* Enable, no interleaving */
+    #define CFG_DDR_EXT_REFRESH 0x00000000
+    #define CFG_DDR_TIMING_0    0x00260802
+    #define CFG_DDR_TIMING_1	0x39357322
+    #define CFG_DDR_TIMING_2	0x14904cc8
+    #define CFG_DDR_MODE_1	0x00480432
+    #define CFG_DDR_MODE_2	0x00000000
+    #define CFG_DDR_INTERVAL	0x06090100
+    #define CFG_DDR_DATA_INIT   0xdeadbeef
+    #define CFG_DDR_CLK_CTRL    0x03800000
+    #define CFG_DDR_OCD_CTRL    0x00000000  
+    #define CFG_DDR_OCD_STATUS  0x00000000  
+    #define CFG_DDR_CONTROL	0xe3008000	/* Type = DDR2 */
+    #define CFG_DDR_CONTROL2	0x04400000	
+
+    //Not used in fixed_sdram function
+
+    #define CFG_DDR_MODE	0x00000022
+    #define CFG_DDR_CS1_BNDS	0x00000000
+    #define CFG_DDR_CS2_BNDS	0x00000FFF  //Not done
+    #define CFG_DDR_CS3_BNDS	0x00000FFF  //Not done
+    #define CFG_DDR_CS4_BNDS	0x00000FFF  //Not done
+    #define CFG_DDR_CS5_BNDS	0x00000FFF  //Not done
+
+
+
+#endif
+#endif
+
+
+/*
+ * SDRAM on the Local Bus
+ */
+//#define CFG_LBC_SDRAM_BASE	0xf0000000	/* Localbus SDRAM */
+//#define CFG_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB */
+
+/* In MPC8641HPCN, we allocate 16MB flash spaces at fe000000 and ff000000
+ * We only have an 8MB flash. In effect, the addresses from fe000000 to fe7fffff
+ * map to fe800000 to ffffffff, and ff000000 to ff7fffff map to ffffffff.
+ * However, when u-boot comes up, the flash_init needs hard start addresses
+ * to build its info table. For user convenience, we have the flash addresses
+ * as fe800000 and ff800000. That way, when we do flash operations, u-boot
+ * knows where the flash is and the user can download u-boot code from promjet to
+ * fef00000 <- more intuitive than fe700000. Note that, on switching the boot
+ * location, fef00000 becomes fff00000.
+*/
+#define CFG_FLASH_BASE          0xfe800000     /* start of FLASH 32M */
+#define CFG_FLASH_BASE2		0xff800000	
+
+#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE, CFG_FLASH_BASE2}
+
+
+/*Sri: This looks like a good place to init all the Local Bus chip selects*/
+
+#define CFG_BR0_PRELIM		0xff001001	/* port size 16bit */
+#define CFG_OR0_PRELIM		0xff006ff7	/* 16MB Boot Flash area*/
+
+#define CFG_BR1_PRELIM		0xfe001001	/* port size 16bit */
+#define CFG_OR1_PRELIM		0xff006ff7	/* 16MB Alternate Boot Flash area*/
+
+#define CFG_BR2_PRELIM		0xf8201001	/* port size 16bit */
+#define CFG_OR2_PRELIM		0xfff06ff7	/* 1MB Compact Flash area*/
+
+#define CFG_BR3_PRELIM		0xf8100801	/* port size 8bit */
+#define CFG_OR3_PRELIM		0xfff06ff7	/* 1MB PIXIS area*/
+
+#define PIXIS_BASE              0xf8100000      /* PIXIS registers*/
+#define PIXIS_ID                0x0               /* MPC8641HPCN Board ID at offset 0*/
+#define PIXIS_VER               0x1               /* MPC8641HPCN board version version at offset 1*/
+#define PIXIS_PVER              0x2               /* PIXIS FPGA version at offset 2*/
+#define PIXIS_RST               0x4               /* PIXIS Reset Control register*/
+#define PIXIS_AUX               0x6               /* PIXIS Auxiliary register; Scratch register */
+#define PIXIS_SPD               0x7               /* Register for SYSCLK speed */
+#define PIXIS_VCTL              0x10              /* VELA Control Register */
+#define PIXIS_VCFGEN0           0x12              /* VELA Config Enable 0 */
+#define PIXIS_VCFGEN1           0x13              /* VELA Config Enable 1 */
+#define PIXIS_VBOOT             0x16              /* VELA VBOOT Register */
+#define PIXIS_VSPEED0           0x17              /* VELA VSpeed 0 */
+#define PIXIS_VSPEED1           0x18              /* VELA VSpeed 1 */
+#define PIXIS_VCLKH             0x19              /* VELA VCLKH register */
+#define PIXIS_VCLKL             0x1A              /* VELA VCLKL register */
+
+
+#define CFG_MAX_FLASH_BANKS	2		/* number of banks */
+//#define CFG_MAX_FLASH_SECT	64		/* sectors per device */
+#define CFG_MAX_FLASH_SECT	128		/* sectors per device */
+
+#undef	CFG_FLASH_CHECKSUM
+#define CFG_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
+#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
+#define CFG_MONITOR_BASE    	TEXT_BASE	/* start of monitor */
+
+/*#define CFG_HPCN_FLASH_CFI_DRIVER */
+#define CFG_FLASH_CFI
+#define CFG_FLASH_EMPTY_INFO
+
+
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#define CFG_RAMBOOT
+#else
+#undef  CFG_RAMBOOT
+#endif
+
+#if !defined(CFG_RAMBOOT)
+#define CONFIG_SPD_EEPROM        	/* Use SPD EEPROM for DDR setup*/
+#endif
+
+#undef CONFIG_CLOCKS_IN_MHZ
+
+#define CONFIG_L1_INIT_RAM
+#undef CFG_INIT_RAM_LOCK 	
+#ifndef CFG_INIT_RAM_LOCK
+#define CFG_INIT_RAM_ADDR	0x0fd00000	/* Initial RAM address */
+#else
+#define CFG_INIT_RAM_ADDR	0xf8400000	/* Initial RAM address */
+#endif
+#define CFG_INIT_RAM_END    	0x4000	    	/* End of used area in RAM */
+
+#define CFG_GBL_DATA_SIZE  	128		/* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_LEN	    	(256 * 1024)    /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN	    	(128 * 1024)    /* Reserved for malloc */
+
+/* Serial Port */
+#define CONFIG_CONS_INDEX     1
+#undef	CONFIG_SERIAL_SOFTWARE_FIFO
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE    1
+#define CFG_NS16550_CLK		get_bus_freq(0)
+
+#define CFG_BAUDRATE_TABLE  \
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
+
+#define CFG_NS16550_COM1        (CFG_CCSRBAR+0x4500)
+#define CFG_NS16550_COM2        (CFG_CCSRBAR+0x4600)
+
+/* Use the HUSH parser */
+#define CFG_HUSH_PARSER
+#ifdef  CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_FLAT_TREE 1
+#define CONFIG_OF_BOARD_SETUP 1
+
+/* maximum size of the flat tree (8K) */
+#define OF_FLAT_TREE_MAX_SIZE 8192
+
+#define OF_CPU   "PowerPC,8641@0"
+#define OF_SOC   "soc8641@f8000000"
+#define OF_TBCLK  (bd->bi_busfreq / 8)
+#define OF_STDOUT_PATH  "/soc8641@f8000000/serial@4500"
+
+#define CFG_64BIT_VSPRINTF 1
+#define CFG_64BIT_STRTOUL 1
+
+/* I2C */
+#define  CONFIG_HARD_I2C		/* I2C with hardware support*/
+#undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
+#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CFG_I2C_SLAVE		0x7F
+#define CFG_I2C_NOPROBES        {0x69}	/* Don't probe these addrs */
+
+/* RapidIO MMU */
+#define CFG_RIO_MEM_BASE	0xc0000000	/* base address */
+#define CFG_RIO_MEM_PHYS	CFG_RIO_MEM_BASE
+#define CFG_RIO_MEM_SIZE	0x20000000	/* 128M */
+
+/*
+ * General PCI
+ * Addresses are mapped 1-1.
+ */
+#define CFG_PCI1_MEM_BASE	0x80000000
+//#define CFG_PCI1_MEM_BASE	0xd0000000
+#define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
+#define CFG_PCI1_MEM_SIZE	0x20000000	/* 512M */
+#define CFG_PCI1_IO_BASE	0xe2000000
+//#define CFG_PCI1_IO_BASE	0xe0000000
+#define CFG_PCI1_IO_PHYS	CFG_PCI1_IO_BASE
+//#define CFG_PCI1_IO_BUS         0x00000000
+#define CFG_PCI1_IO_SIZE	0x1000000	/* 16M */
+
+/* For RTL8139 */
+#define _IO_BASE                0x00000000
+
+#define CFG_PCI2_MEM_BASE	0xa0000000
+#define CFG_PCI2_MEM_PHYS	CFG_PCI2_MEM_BASE
+#define CFG_PCI2_MEM_SIZE	0x10000000	/* 256M */
+#define CFG_PCI2_IO_BASE	0xe3000000
+#define CFG_PCI2_IO_PHYS	CFG_PCI2_IO_BASE
+#define CFG_PCI2_IO_SIZE	0x1000000	/* 16M */
+
+// #define CFG_PCI1_MEM_BASE	0x80000000
+// #define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
+// #define CFG_PCI1_MEM_SIZE	0x20000000	/* 512M */
+// #define CFG_PCI1_IO_BASE	0xe2000000
+// #define CFG_PCI1_IO_PHYS	CFG_PCI1_IO_BASE
+// #define CFG_PCI1_IO_SIZE	0x1000000	/* 16M */
+
+
+
+#if defined(CONFIG_PCI)
+
+
+#define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
+
+//#define CFG_SCSI_SCAN_BUS_REVERSE
+
+
+#define CONFIG_NET_MULTI
+#define CONFIG_PCI_PNP	               	/* do pci plug-and-play */
+
+#define CONFIG_RTL8139
+
+
+#undef CONFIG_EEPRO100
+#undef CONFIG_TULIP
+
+#if !defined(CONFIG_PCI_PNP)
+    #define PCI_ENET0_IOADDR	0xe0000000
+    #define PCI_ENET0_MEMADDR	0xe0000000
+    #define PCI_IDSEL_NUMBER	0x0c 	/* slot0->3(IDSEL)=12->15 */
+#endif
+
+#undef CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
+//#define CFG_PCI_SUBSYS_VENDORID 0x1057  /* Motorola */
+
+#endif	/* CONFIG_PCI */
+
+
+#if defined(CONFIG_TSEC_ENET)
+
+#ifndef CONFIG_NET_MULTI
+#define CONFIG_NET_MULTI 	1
+#endif
+
+#define CONFIG_MII		1	/* MII PHY management */
+
+#define CONFIG_MPC86XX_TSEC1    1
+#define CONFIG_MPC86XX_TSEC1_NAME       "eTSEC1"
+#define CONFIG_MPC86XX_TSEC2    1
+#define CONFIG_MPC86XX_TSEC2_NAME       "eTSEC2"
+#define CONFIG_MPC86XX_TSEC3    1
+#define CONFIG_MPC86XX_TSEC3_NAME       "eTSEC3"
+#define CONFIG_MPC86XX_TSEC4    1
+#define CONFIG_MPC86XX_TSEC4_NAME       "eTSEC4"
+
+
+#define TSEC1_PHY_ADDR		0
+#define TSEC2_PHY_ADDR		1
+#define TSEC3_PHY_ADDR		2
+#define TSEC4_PHY_ADDR		3
+#define TSEC1_PHYIDX		0
+#define TSEC2_PHYIDX		0
+#define TSEC3_PHYIDX		0
+#define TSEC4_PHYIDX		0
+
+#define CONFIG_ETHPRIME		"eTSEC1"
+
+#endif	/* CONFIG_TSEC_ENET */
+
+
+/* BAT0         2G     Cacheable, non-guarded
+ * 0x0000_0000  2G     DDR
+ */
+//#define CFG_DBAT0L      (0x0 | BATL_PP_RW | BATL_MEMCOHERENCE)
+#define CFG_DBAT0L      (0x0 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE | BATL_MEMCOHERENCE)
+#define CFG_DBAT0U      (0x0 | BATU_BL_512M | BATU_VS | BATU_VP)
+//#define CFG_IBAT0L      CFG_DBAT0L
+//#define CFG_IBAT0L      (0x0 | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CFG_IBAT0L      (0x0| BATL_PP_RW | BATL_CACHEINHIBIT | BATL_MEMCOHERENCE)
+#define CFG_IBAT0U      CFG_DBAT0U
+
+/* BAT1         1G     Cache-inhibited, guarded
+ * 0x8000_0000  512M   PCI-Express 1 Memory
+ * 0xa000_0000  512M   PCI-Express 2 Memory
+ ** SS - Changed it for operating from 0xd0000000
+ */
+#define CFG_DBAT1L      (CFG_PCI1_MEM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_DBAT1U      (CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_IBAT1L      (CFG_PCI1_MEM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CFG_IBAT1U      CFG_DBAT1U
+
+/* BAT2         512M   Cache-inhibited, guarded
+ * 0xc000_0000  512M   RapidIO Memory
+ */
+#define CFG_DBAT2L      (CFG_RIO_MEM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_DBAT2U      (CFG_RIO_MEM_BASE | BATU_BL_512M | BATU_VS | BATU_VP)
+#define CFG_IBAT2L      (CFG_RIO_MEM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CFG_IBAT2U      CFG_DBAT2U
+
+/* BAT3         4M     Cache-inhibited, guarded
+ * 0xf800_0000  4M     CCSR
+ */
+#define CFG_DBAT3L      (CFG_CCSRBAR | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_DBAT3U      (CFG_CCSRBAR | BATU_BL_4M | BATU_VS | BATU_VP)
+#define CFG_IBAT3L      (CFG_CCSRBAR | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CFG_IBAT3U      CFG_DBAT3U
+
+/* BAT4         32M    Cache-inhibited, guarded
+ * 0xe200_0000  16M    PCI-Express 1 I/O
+ * 0xe300_0000  16M    PCI-Express 2 I/0
+ ** SS - Note that this is at 0xe0000000
+ */
+#define CFG_DBAT4L      (CFG_PCI1_IO_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_DBAT4U      (CFG_PCI1_IO_BASE | BATU_BL_32M | BATU_VS | BATU_VP)
+#define CFG_IBAT4L      (CFG_PCI1_IO_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CFG_IBAT4U      CFG_DBAT4U
+
+/* BAT5         128K   Cacheable, non-guarded
+ * 0xe401_0000  128K   Init RAM for stack in the CPU DCache (no backing memory)
+ */
+#define CFG_DBAT5L      (CFG_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE)
+#define CFG_DBAT5U      (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CFG_IBAT5L      CFG_DBAT5L
+#define CFG_IBAT5U      CFG_DBAT5U
+
+/* BAT6         32M    Cache-inhibited, guarded
+ * 0xfe00_0000  32M    FLASH
+ */
+#define CFG_DBAT6L      (CFG_FLASH_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_DBAT6U      (CFG_FLASH_BASE | BATU_BL_32M | BATU_VS | BATU_VP)
+#define CFG_IBAT6L      (CFG_FLASH_BASE | BATL_PP_RW | BATL_MEMCOHERENCE)
+#define CFG_IBAT6U      CFG_DBAT6U
+
+
+#define CFG_DBAT7L 0x00000000
+#define CFG_DBAT7U 0x00000000
+#define CFG_IBAT7L 0x00000000
+#define CFG_IBAT7U 0x00000000
+
+
+
+
+/*
+ * Environment
+ */
+ #ifndef CFG_RAMBOOT
+   #define CFG_ENV_IS_IN_FLASH	1
+   #define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
+   #define CFG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
+   #define CFG_ENV_SIZE		0x2000
+ #else
+   #define CFG_NO_FLASH		1	/* Flash is not usable now */
+   #define CFG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
+   #define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
+   #define CFG_ENV_SIZE		0x2000
+ #endif
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
+
+#if defined(CFG_RAMBOOT)
+  #if defined(CONFIG_PCI)
+    #define  CONFIG_COMMANDS	((CONFIG_CMD_DFL	\
+				 | CFG_CMD_PING		\
+				 | CFG_CMD_PCI		\
+				 | CFG_CMD_I2C)		\
+				&			\
+				 ~(CFG_CMD_ENV		\
+				  | CFG_CMD_IMLS	\
+				  | CFG_CMD_FLASH	\
+				  | CFG_CMD_LOADS))
+  #else
+    #define  CONFIG_COMMANDS	((CONFIG_CMD_DFL	\
+				 | CFG_CMD_PING		\
+				 | CFG_CMD_I2C)		\
+				&			\
+				 ~(CFG_CMD_ENV		\
+				 | CFG_CMD_IMLS		\
+				 | CFG_CMD_FLASH	\
+				 | CFG_CMD_LOADS))
+  #endif
+#else
+  #if defined(CONFIG_PCI)
+    #define  CONFIG_COMMANDS	(CONFIG_CMD_DFL		\
+				| CFG_CMD_PCI		\
+				| CFG_CMD_PING		\
+				| CFG_CMD_I2C)
+  #else
+    #define  CONFIG_COMMANDS	(CONFIG_CMD_DFL		\
+				| CFG_CMD_PING		\
+				| CFG_CMD_I2C)
+  #endif
+#endif
+
+#include <cmd_confdefs.h>
+
+#undef CONFIG_WATCHDOG			/* watchdog disabled */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP			/* undef to save memory	*/
+#define CFG_LOAD_ADDR	0x2000000	/* default load address */
+#define CFG_PROMPT	"=> "		/* Monitor Command Prompt */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+    #define CFG_CBSIZE	1024		/* Console I/O Buffer Size */
+#else
+    #define CFG_CBSIZE	256		/* Console I/O Buffer Size */
+#endif
+
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS	16		/* max number of command args */
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
+#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
+
+/* Cache Configuration */
+#define CFG_DCACHE_SIZE		32768
+#define CFG_CACHELINE_SIZE	32
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT	5	/*log base 2 of the above value*/
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM	0x02		/* Software reboot */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
+#endif
+
+
+/*
+ * Environment Configuration
+ */
+
+/* The mac addresses for all ethernet interface */
+#if defined(CONFIG_TSEC_ENET)
+#define CONFIG_ETHADDR   00:E0:0C:00:00:01
+#define CONFIG_ETH1ADDR  00:E0:0C:00:01:FD
+#define CONFIG_ETH2ADDR  00:E0:0C:00:02:FD
+#define CONFIG_ETH3ADDR  00:E0:0C:00:03:FD
+#endif
+
+#define   CONFIG_HAS_ETH1      1
+#define   CONFIG_HAS_ETH2      1
+#define   CONFIG_HAS_ETH3      1
+
+#define CONFIG_IPADDR    10.82.193.138
+
+#define CONFIG_HOSTNAME		unknown
+#define CONFIG_ROOTPATH		/opt/nfsroot
+#define CONFIG_BOOTFILE		uImage
+
+#define CONFIG_SERVERIP  10.82.193.104
+#define CONFIG_GATEWAYIP 10.82.193.254
+#define CONFIG_NETMASK   255.255.252.0
+
+#define CONFIG_LOADADDR  1000000	/* default location for tftp and bootm */
+
+#define CONFIG_BOOTDELAY 10	/* -1 disables auto-boot */
+//#undef  CONFIG_BOOTARGS		/* the boot command will set bootargs */
+#define CONFIG_BOOTARGS       "root=/dev/ram rw console=ttyS0,115200"
+
+#define CONFIG_BAUDRATE	115200
+
+#define	CONFIG_EXTRA_ENV_SETTINGS				        \
+   "netdev=eth0\0"                                                      \
+   "consoledev=ttyS0\0"                                                 \
+   "ramdiskaddr=400000\0"						\
+   "ramdiskfile=your.ramdisk.u-boot\0"                                  \
+   "pex0=echo ---------------------------; echo --------- PCI EXPRESS -----\0" \
+   "pexstat=mw f8008000 84000004; echo -expect:- 16000000; md f8008004 1\0" \
+   "pex1=pci write 1.0.0 4 146; pci write 1.0.0 10 80000000\0" \
+   "pexd=echo -expect:- xxx01002 00100146; pci display 1.0.0 0 2\0" \
+   "pex=run pexstat; run pex1; run pexd\0" \
+   "en-wd=mw.b f8100010 0x08; echo -expect:- 08; md.b f8100010 1\0" \
+   "dis-wd=mw.b f8100010 0x00; echo -expect:- 00; md.b f8100010 1\0" \
+   "maxcpus=2"
+
+
+#define CONFIG_NFSBOOTCOMMAND	                                        \
+   "setenv bootargs root=/dev/nfs rw "                                  \
+      "nfsroot=$serverip:$rootpath "                                    \
+      "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+      "console=$consoledev,$baudrate $othbootargs;"                     \
+   "tftp $loadaddr $bootfile;"                                          \
+   "bootm $loadaddr"
+
+#define CONFIG_RAMBOOTCOMMAND \
+   "setenv bootargs root=/dev/ram rw "                                  \
+      "console=$consoledev,$baudrate $othbootargs;"                     \
+   "tftp $ramdiskaddr $ramdiskfile;"                                    \
+   "tftp $loadaddr $bootfile;"                                          \
+   "bootm $loadaddr $ramdiskaddr"
+
+#define CONFIG_BOOTCOMMAND  CONFIG_NFSBOOTCOMMAND
+
+#endif	/* __CONFIG_H */