Patches by Josef Wagner, 29 Oct 2004:

- Add support for MicroSys CPU87 board
- Add support for MicroSys PM854 board

2 files changed, 1113 insertions, 0 deletions

diff --git a/include/configs/CPU87.h b/include/configs/CPU87.h
new file mode 100644
index 0000000..6b12258
--- /dev/null
+++ b/include/configs/CPU87.h
@@ -0,0 +1,683 @@
+/*
+ * (C) Copyright 2001-2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_MPC8260		1	/* This is an MPC8260 CPU		*/
+#define CONFIG_CPU87		1	/* ...on a CPU87 board	*/
+#define CONFIG_PCI
+
+/*
+ * select serial console configuration
+ *
+ * if either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
+ * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
+ * for SCC).
+ *
+ * if CONFIG_CONS_NONE is defined, then the serial console routines must
+ * defined elsewhere (for example, on the cogent platform, there are serial
+ * ports on the motherboard which are used for the serial console - see
+ * cogent/cma101/serial.[ch]).
+ */
+#undef	CONFIG_CONS_ON_SMC		/* define if console on SMC */
+#define CONFIG_CONS_ON_SCC		/* define if console on SCC */
+#undef	CONFIG_CONS_NONE		/* define if console on something else*/
+#define CONFIG_CONS_INDEX	1	/* which serial channel for console */
+
+#if defined(CONFIG_CONS_NONE) || defined(CONFIG_CONS_USE_EXTC)
+#define CONFIG_BAUDRATE		230400
+#else
+#define CONFIG_BAUDRATE		9600
+#endif
+
+/*
+ * select ethernet configuration
+ *
+ * if either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then
+ * CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3
+ * for FCC)
+ *
+ * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
+ * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
+ * from CONFIG_COMMANDS to remove support for networking.
+ *
+ */
+#undef	CONFIG_ETHER_ON_SCC		/* define if ether on SCC	*/
+#define CONFIG_ETHER_ON_FCC		/* define if ether on FCC	*/
+#undef	CONFIG_ETHER_NONE		/* define if ether on something else */
+#define CONFIG_ETHER_INDEX	1	/* which SCC/FCC channel for ethernet */
+
+#define	CONFIG_HAS_ETH1		1
+#define	CONFIG_HAS_ETH2		1
+
+#if defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 1)
+
+/*
+ * - Rx-CLK is CLK11
+ * - Tx-CLK is CLK12
+ * - RAM for BD/Buffers is on the 60x Bus (see 28-13)
+ * - Enable Full Duplex in FSMR
+ */
+# define CFG_CMXFCR_MASK	(CMXFCR_FC1|CMXFCR_RF1CS_MSK|CMXFCR_TF1CS_MSK)
+# define CFG_CMXFCR_VALUE	(CMXFCR_RF1CS_CLK11|CMXFCR_TF1CS_CLK12)
+# define CFG_CPMFCR_RAMTYPE	0
+# define CFG_FCC_PSMR		(FCC_PSMR_FDE|FCC_PSMR_LPB)
+
+#elif defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 2)
+
+/*
+ * - Rx-CLK is CLK13
+ * - Tx-CLK is CLK14
+ * - RAM for BD/Buffers is on the 60x Bus (see 28-13)
+ * - Enable Full Duplex in FSMR
+ */
+# define CFG_CMXFCR_MASK	(CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
+# define CFG_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
+# define CFG_CPMFCR_RAMTYPE	0
+# define CFG_FCC_PSMR		(FCC_PSMR_FDE|FCC_PSMR_LPB)
+
+#endif /* CONFIG_ETHER_ON_FCC, CONFIG_ETHER_INDEX */
+
+/* system clock rate (CLKIN) - equal to the 60x and local bus speed */
+#define CONFIG_8260_CLKIN	100000000	/* in Hz */
+
+#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
+
+#undef	CONFIG_CLOCKS_IN_MHZ		
+
+#define CONFIG_PREBOOT								\
+	"echo; "								\
+	"echo Type \"run flash_nfs\" to mount root filesystem over NFS; "	\
+	"echo"
+
+#undef	CONFIG_BOOTARGS
+#define CONFIG_BOOTCOMMAND							\
+	"bootp; "								\
+	"setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) "	\
+	"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off; "	\
+	"bootm"
+
+/*-----------------------------------------------------------------------
+ * I2C/EEPROM/RTC configuration
+ */
+#define CONFIG_SOFT_I2C			/* Software I2C support enabled */
+
+# define CFG_I2C_SPEED		50000
+# define CFG_I2C_SLAVE		0xFE
+/*
+ * Software (bit-bang) I2C driver configuration
+ */
+#define I2C_PORT	3		/* Port A=0, B=1, C=2, D=3 */
+#define I2C_ACTIVE	(iop->pdir |=  0x00010000)
+#define I2C_TRISTATE	(iop->pdir &= ~0x00010000)
+#define I2C_READ	((iop->pdat & 0x00010000) != 0)
+#define I2C_SDA(bit)	if(bit) iop->pdat |=  0x00010000; \
+			else	iop->pdat &= ~0x00010000
+#define I2C_SCL(bit)	if(bit) iop->pdat |=  0x00020000; \
+			else	iop->pdat &= ~0x00020000
+#define I2C_DELAY	udelay(5)	/* 1/4 I2C clock duration */
+
+#define CONFIG_RTC_PCF8563
+#define CFG_I2C_RTC_ADDR	0x51
+
+#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
+
+/*-----------------------------------------------------------------------
+ * Disk-On-Chip configuration
+ */
+
+#define CFG_MAX_DOC_DEVICE	1	/* Max number of DOC devices	*/
+
+#define CFG_DOC_SUPPORT_2000
+#define CFG_DOC_SUPPORT_MILLENNIUM
+
+/*-----------------------------------------------------------------------
+ * Miscellaneous configuration options
+ */
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
+#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+
+#define CONFIG_BOOTP_MASK	(CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE)
+
+#ifdef CONFIG_PCI
+#define CONFIG_COMMANDS		(CONFIG_CMD_DFL | \
+				 CFG_CMD_BEDBUG | \
+				 CFG_CMD_DATE	| \
+				 CFG_CMD_DOC	| \
+				 CFG_CMD_EEPROM | \
+				 CFG_CMD_I2C	| \
+				 CFG_CMD_PCI)
+#else	/* ! PCI */
+#define CONFIG_COMMANDS		(CONFIG_CMD_DFL | \
+				 CFG_CMD_BEDBUG | \
+				 CFG_CMD_DATE	| \
+				 CFG_CMD_DOC	| \
+				 CFG_CMD_EEPROM | \
+				 CFG_CMD_I2C	)
+#endif	/* CONFIG_PCI */
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP			/* undef to save memory		*/
+#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#else
+#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS	16		/* max number of command args	*/
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+
+#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CFG_MEMTEST_END 0x0C00000	/* 4 ... 12 MB in DRAM	*/
+
+#define CFG_LOAD_ADDR	0x100000	/* default load address */
+
+#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
+
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+#define CFG_RESET_ADDRESS 0xFFF00100	/* "bad" address		*/
+
+#define CONFIG_LOOPW
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * Flash configuration
+ */
+
+#define CFG_BOOTROM_BASE	0xFF800000
+#define CFG_BOOTROM_SIZE	0x00080000
+#define CFG_FLASH_BASE		0xFF000000
+#define CFG_FLASH_SIZE		0x00800000
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_MAX_FLASH_BANKS	2	/* max num of memory banks	*/
+#define CFG_MAX_FLASH_SECT	135	/* max num of sects on one chip */
+
+#define CFG_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)	*/
+#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)	*/
+
+/*-----------------------------------------------------------------------
+ * Other areas to be mapped
+ */
+
+/* CS3: Dual ported SRAM */
+#define CFG_DPSRAM_BASE		0x40000000
+#define CFG_DPSRAM_SIZE		0x00100000
+
+/* CS4: DiskOnChip */
+#define CFG_DOC_BASE		0xF4000000
+#define CFG_DOC_SIZE		0x00100000
+
+/* CS5: FDC37C78 controller */
+#define CFG_FDC37C78_BASE	0xF1000000
+#define CFG_FDC37C78_SIZE	0x00100000
+
+/* CS6: Board configuration registers */
+#define CFG_BCRS_BASE		0xF2000000
+#define CFG_BCRS_SIZE		0x00010000
+
+/* CS7: VME Extended Access Range */
+#define CFG_VMEEAR_BASE		0x60000000
+#define CFG_VMEEAR_SIZE		0x01000000
+
+/* CS8: VME Standard Access Range */
+#define CFG_VMESAR_BASE		0xFE000000
+#define CFG_VMESAR_SIZE		0x01000000
+
+/* CS9: VME Short I/O Access Range */
+#define CFG_VMESIOAR_BASE	0xFD000000
+#define CFG_VMESIOAR_SIZE	0x01000000
+
+/*-----------------------------------------------------------------------
+ * Hard Reset Configuration Words
+ *
+ * if you change bits in the HRCW, you must also change the CFG_*
+ * defines for the various registers affected by the HRCW e.g. changing
+ * HRCW_DPPCxx requires you to also change CFG_SIUMCR.
+ */
+#if defined(CONFIG_BOOT_ROM)
+#define CFG_HRCW_MASTER		(HRCW_CIP | HRCW_ISB100 | HRCW_BMS | \
+				 HRCW_BPS01 | HRCW_CS10PC01)
+#else
+#define CFG_HRCW_MASTER		(HRCW_CIP | HRCW_ISB100 | HRCW_BMS | HRCW_CS10PC01)
+#endif
+
+/* no slaves so just fill with zeros */
+#define CFG_HRCW_SLAVE1		0
+#define CFG_HRCW_SLAVE2		0
+#define CFG_HRCW_SLAVE3		0
+#define CFG_HRCW_SLAVE4		0
+#define CFG_HRCW_SLAVE5		0
+#define CFG_HRCW_SLAVE6		0
+#define CFG_HRCW_SLAVE7		0
+
+/*-----------------------------------------------------------------------
+ * Internal Memory Mapped Register
+ */
+#define CFG_IMMR		0xF0000000
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+#define CFG_INIT_RAM_ADDR	CFG_IMMR
+#define CFG_INIT_RAM_END	0x4000	/* End of used area in DPRAM	*/
+#define CFG_GBL_DATA_SIZE	128 /* size in bytes reserved for initial data*/
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ *
+ * 60x SDRAM is mapped at CFG_SDRAM_BASE.
+ */
+#define CFG_SDRAM_BASE		0x00000000
+#define CFG_SDRAM_MAX_SIZE	0x08000000	/* max. 128 MB		*/
+#define CFG_MONITOR_BASE	TEXT_BASE
+#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
+#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()*/
+
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+# define CFG_RAMBOOT
+#endif
+
+#ifdef	CONFIG_PCI
+#define CONFIG_PCI_PNP
+#define CONFIG_EEPRO100
+#define CFG_RX_ETH_BUFFER	8		/* use 8 rx buffer on eepro100	*/
+#endif
+
+#if 0
+/* environment is in Flash */
+#define CFG_ENV_IS_IN_FLASH	1
+#ifdef CONFIG_BOOT_ROM
+# define CFG_ENV_ADDR		(CFG_FLASH_BASE+0x70000)
+# define CFG_ENV_SIZE		0x10000
+# define CFG_ENV_SECT_SIZE	0x10000
+#endif
+#else
+/* environment is in EEPROM */
+#define CFG_ENV_IS_IN_EEPROM	1
+#define CFG_I2C_EEPROM_ADDR	0x58	/* EEPROM X24C16		*/
+#define CFG_I2C_EEPROM_ADDR_LEN 1
+/* mask of address bits that overflow into the "EEPROM chip address"	*/
+#define CFG_I2C_EEPROM_ADDR_OVERFLOW	0x07
+#define CFG_EEPROM_PAGE_WRITE_BITS	4
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10	/* and takes up to 10 msec */
+#define CFG_ENV_OFFSET		512
+#define CFG_ENV_SIZE		(2048 - 512)
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH*/
+#define BOOTFLAG_WARM		0x02	/* Software reboot		   */
+
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE	32	/* For MPC8260 CPU		*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#endif
+
+/*-----------------------------------------------------------------------
+ * HIDx - Hardware Implementation-dependent Registers			 2-11
+ *-----------------------------------------------------------------------
+ * HID0 also contains cache control - initially enable both caches and
+ * invalidate contents, then the final state leaves only the instruction
+ * cache enabled. Note that Power-On and Hard reset invalidate the caches,
+ * but Soft reset does not.
+ *
+ * HID1 has only read-only information - nothing to set.
+ */
+#define CFG_HID0_INIT	(HID0_ICE|HID0_DCE|HID0_ICFI|\
+			 HID0_DCI|HID0_IFEM|HID0_ABE)
+#define CFG_HID0_FINAL	(HID0_IFEM|HID0_ABE)
+#define CFG_HID2	0
+
+/*-----------------------------------------------------------------------
+ * RMR - Reset Mode Register					 5-5
+ *-----------------------------------------------------------------------
+ * turn on Checkstop Reset Enable
+ */
+#define CFG_RMR		RMR_CSRE
+
+/*-----------------------------------------------------------------------
+ * BCR - Bus Configuration					 4-25
+ *-----------------------------------------------------------------------
+ */
+#define BCR_APD01	0x10000000
+#define CFG_BCR		(BCR_APD01|BCR_ETM|BCR_LETM)	/* 8260 mode */
+
+/*-----------------------------------------------------------------------
+ * SIUMCR - SIU Module Configuration				 4-31
+ *-----------------------------------------------------------------------
+ */
+#define CFG_SIUMCR	(SIUMCR_BBD|SIUMCR_DPPC00|SIUMCR_APPC10|\
+			 SIUMCR_CS10PC01|SIUMCR_BCTLC10)
+
+/*-----------------------------------------------------------------------
+ * SYPCR - System Protection Control				 4-35
+ * SYPCR can only be written once after reset!
+ *-----------------------------------------------------------------------
+ * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable
+ */
+#if defined(CONFIG_WATCHDOG)
+#define CFG_SYPCR	(SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
+			 SYPCR_SWRI|SYPCR_SWP|SYPCR_SWE)
+#else
+#define CFG_SYPCR	(SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
+			 SYPCR_SWRI|SYPCR_SWP)
+#endif /* CONFIG_WATCHDOG */
+
+/*-----------------------------------------------------------------------
+ * TMCNTSC - Time Counter Status and Control			 4-40
+ *-----------------------------------------------------------------------
+ * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
+ * and enable Time Counter
+ */
+#define CFG_TMCNTSC	(TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
+
+/*-----------------------------------------------------------------------
+ * PISCR - Periodic Interrupt Status and Control		 4-42
+ *-----------------------------------------------------------------------
+ * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
+ * Periodic timer
+ */
+#define CFG_PISCR	(PISCR_PS|PISCR_PTF|PISCR_PTE)
+
+/*-----------------------------------------------------------------------
+ * SCCR - System Clock Control					 9-8
+ *-----------------------------------------------------------------------
+ * Ensure DFBRG is Divide by 16
+ */
+#define CFG_SCCR	SCCR_DFBRG01
+
+/*-----------------------------------------------------------------------
+ * RCCR - RISC Controller Configuration				13-7
+ *-----------------------------------------------------------------------
+ */
+#define CFG_RCCR	0
+
+#define CFG_MIN_AM_MASK 0xC0000000
+
+/*
+ * we use the same values for 32 MB and 128 MB SDRAM
+ * refresh rate = 7.68 uS (100 MHz Bus Clock)
+ */
+
+/*-----------------------------------------------------------------------
+ * MPTPR - Memory Refresh Timer Prescaler Register		10-18
+ *-----------------------------------------------------------------------
+ */
+#define CFG_MPTPR	0x2000
+
+/*-----------------------------------------------------------------------
+ * PSRT - Refresh Timer Register				10-16
+ *-----------------------------------------------------------------------
+ */
+#define CFG_PSRT	0x16
+
+/*-----------------------------------------------------------------------
+ * PSRT - SDRAM Mode Register					10-10
+ *-----------------------------------------------------------------------
+ */
+
+	/* SDRAM initialization values for 8-column chips
+	 */
+#define CFG_OR2_8COL	(CFG_MIN_AM_MASK		|\
+			 ORxS_BPD_4			|\
+			 ORxS_ROWST_PBI0_A9		|\
+			 ORxS_NUMR_12)
+
+#define CFG_PSDMR_8COL	(PSDMR_SDAM_A13_IS_A5		|\
+			 PSDMR_BSMA_A14_A16		|\
+			 PSDMR_SDA10_PBI0_A10		|\
+			 PSDMR_RFRC_7_CLK		|\
+			 PSDMR_PRETOACT_2W		|\
+			 PSDMR_ACTTORW_2W		|\
+			 PSDMR_LDOTOPRE_1C		|\
+			 PSDMR_WRC_1C			|\
+			 PSDMR_CL_2)
+
+	/* SDRAM initialization values for 9-column chips
+	 */
+#define CFG_OR2_9COL	(CFG_MIN_AM_MASK		|\
+			 ORxS_BPD_4			|\
+			 ORxS_ROWST_PBI0_A7		|\
+			 ORxS_NUMR_13)
+
+#define CFG_PSDMR_9COL	(PSDMR_SDAM_A14_IS_A5		|\
+			 PSDMR_BSMA_A13_A15		|\
+			 PSDMR_SDA10_PBI0_A9		|\
+			 PSDMR_RFRC_7_CLK		|\
+			 PSDMR_PRETOACT_2W		|\
+			 PSDMR_ACTTORW_2W		|\
+			 PSDMR_LDOTOPRE_1C		|\
+			 PSDMR_WRC_1C			|\
+			 PSDMR_CL_2)
+
+/*
+ * Init Memory Controller:
+ *
+ * Bank Bus	Machine PortSz	Device
+ * ---- ---	------- ------	------
+ *  0	60x	GPCM	8  bit	Boot ROM
+ *  1	60x	GPCM	64 bit	FLASH
+ *  2	60x	SDRAM	64 bit	SDRAM
+ *
+ */
+
+#define CFG_MRS_OFFS	0x00000000
+
+#ifdef CONFIG_BOOT_ROM
+/* Bank 0 - Boot ROM
+ */
+#define CFG_BR0_PRELIM	((CFG_BOOTROM_BASE & BRx_BA_MSK)|\
+			 BRx_PS_8			|\
+			 BRx_MS_GPCM_P			|\
+			 BRx_V)
+
+#define CFG_OR0_PRELIM	(P2SZ_TO_AM(CFG_BOOTROM_SIZE)	|\
+			 ORxG_CSNT			|\
+			 ORxG_ACS_DIV1			|\
+			 ORxG_SCY_5_CLK			|\
+			 ORxU_EHTR_8IDLE)
+
+/* Bank 1 - FLASH
+ */
+#define CFG_BR1_PRELIM	((CFG_FLASH_BASE & BRx_BA_MSK)	|\
+			 BRx_PS_64			|\
+			 BRx_MS_GPCM_P			|\
+			 BRx_V)
+
+#define CFG_OR1_PRELIM	(P2SZ_TO_AM(CFG_FLASH_SIZE)	|\
+			 ORxG_CSNT			|\
+			 ORxG_ACS_DIV1			|\
+			 ORxG_SCY_5_CLK			|\
+			 ORxU_EHTR_8IDLE)
+
+#else /* CONFIG_BOOT_ROM */
+/* Bank 0 - FLASH
+ */
+#define CFG_BR0_PRELIM	((CFG_FLASH_BASE & BRx_BA_MSK)	|\
+			 BRx_PS_64			|\
+			 BRx_MS_GPCM_P			|\
+			 BRx_V)
+
+#define CFG_OR0_PRELIM	(P2SZ_TO_AM(CFG_FLASH_SIZE)	|\
+			 ORxG_CSNT			|\
+			 ORxG_ACS_DIV1			|\
+			 ORxG_SCY_5_CLK			|\
+			 ORxU_EHTR_8IDLE)
+
+/* Bank 1 - Boot ROM
+ */
+#define CFG_BR1_PRELIM	((CFG_BOOTROM_BASE & BRx_BA_MSK)|\
+			 BRx_PS_8			|\
+			 BRx_MS_GPCM_P			|\
+			 BRx_V)
+
+#define CFG_OR1_PRELIM	(P2SZ_TO_AM(CFG_BOOTROM_SIZE)	|\
+			 ORxG_CSNT			|\
+			 ORxG_ACS_DIV1			|\
+			 ORxG_SCY_5_CLK			|\
+			 ORxU_EHTR_8IDLE)
+
+#endif /* CONFIG_BOOT_ROM */
+
+
+/* Bank 2 - 60x bus SDRAM
+ */
+#ifndef CFG_RAMBOOT
+#define CFG_BR2_PRELIM	((CFG_SDRAM_BASE & BRx_BA_MSK)	|\
+			 BRx_PS_64			|\
+			 BRx_MS_SDRAM_P			|\
+			 BRx_V)
+
+#define CFG_OR2_PRELIM	 CFG_OR2_9COL
+
+#define CFG_PSDMR	 CFG_PSDMR_9COL
+#endif /* CFG_RAMBOOT */
+
+/* Bank 3 - Dual Ported SRAM
+ */
+#define CFG_BR3_PRELIM	((CFG_DPSRAM_BASE & BRx_BA_MSK) |\
+			 BRx_PS_16			|\
+			 BRx_MS_GPCM_P			|\
+			 BRx_V)
+
+#define CFG_OR3_PRELIM	(P2SZ_TO_AM(CFG_DPSRAM_SIZE)	|\
+			 ORxG_CSNT			|\
+			 ORxG_ACS_DIV1			|\
+			 ORxG_SCY_7_CLK			|\
+			 ORxG_SETA)
+
+/* Bank 4 - DiskOnChip
+ */
+#define CFG_BR4_PRELIM	((CFG_DOC_BASE & BRx_BA_MSK)	|\
+			 BRx_PS_8			|\
+			 BRx_MS_GPCM_P			|\
+			 BRx_V)
+
+#define CFG_OR4_PRELIM	(P2SZ_TO_AM(CFG_DOC_SIZE)	|\
+			 ORxG_CSNT			|\
+			 ORxG_ACS_DIV2			|\
+			 ORxG_SCY_9_CLK			|\
+			 ORxU_EHTR_8IDLE)
+
+/* Bank 5 - FDC37C78 controller
+ */
+#define CFG_BR5_PRELIM	((CFG_FDC37C78_BASE & BRx_BA_MSK) |\
+			 BRx_PS_8			  |\
+			 BRx_MS_GPCM_P			  |\
+			 BRx_V)
+
+#define CFG_OR5_PRELIM	(P2SZ_TO_AM(CFG_FDC37C78_SIZE)	  |\
+			 ORxG_ACS_DIV2			  |\
+			 ORxG_SCY_10_CLK		  |\
+			 ORxU_EHTR_8IDLE)
+
+/* Bank 6 - Board control registers
+ */
+#define CFG_BR6_PRELIM	((CFG_BCRS_BASE & BRx_BA_MSK)	|\
+			 BRx_PS_8			|\
+			 BRx_MS_GPCM_P			|\
+			 BRx_V)
+
+#define CFG_OR6_PRELIM	(P2SZ_TO_AM(CFG_BCRS_SIZE)	|\
+			 ORxG_CSNT			|\
+			 ORxG_SCY_7_CLK)
+
+/* Bank 7 - VME Extended Access Range
+ */
+#define CFG_BR7_PRELIM	((CFG_VMEEAR_BASE & BRx_BA_MSK) |\
+			 BRx_PS_32			|\
+			 BRx_MS_GPCM_P			|\
+			 BRx_V)
+
+#define CFG_OR7_PRELIM	(P2SZ_TO_AM(CFG_VMEEAR_SIZE)	|\
+			 ORxG_CSNT			|\
+			 ORxG_ACS_DIV1			|\
+			 ORxG_SCY_7_CLK			|\
+			 ORxG_SETA)
+
+/* Bank 8 - VME Standard Access Range
+ */
+#define CFG_BR8_PRELIM	((CFG_VMESAR_BASE & BRx_BA_MSK) |\
+			 BRx_PS_16			|\
+			 BRx_MS_GPCM_P			|\
+			 BRx_V)
+
+#define CFG_OR8_PRELIM	(P2SZ_TO_AM(CFG_VMESAR_SIZE)	|\
+			 ORxG_CSNT			|\
+			 ORxG_ACS_DIV1			|\
+			 ORxG_SCY_7_CLK			|\
+			 ORxG_SETA)
+
+/* Bank 9 - VME Short I/O Access Range
+ */
+#define CFG_BR9_PRELIM	((CFG_VMESIOAR_BASE & BRx_BA_MSK) |\
+			 BRx_PS_16			  |\
+			 BRx_MS_GPCM_P			  |\
+			 BRx_V)
+
+#define CFG_OR9_PRELIM	(P2SZ_TO_AM(CFG_VMESIOAR_SIZE)	  |\
+			 ORxG_CSNT			  |\
+			 ORxG_ACS_DIV1			  |\
+			 ORxG_SCY_7_CLK			  |\
+			 ORxG_SETA)
+
+#endif	/* __CONFIG_H */
diff --git a/include/configs/PM854.h b/include/configs/PM854.h
new file mode 100644
index 0000000..bf7eb8e
--- /dev/null
+++ b/include/configs/PM854.h
@@ -0,0 +1,430 @@
+/*
+ * Copyright 2004 Freescale Semiconductor.
+ * (C) Copyright 2002,2003 Motorola,Inc.
+ * Xianghua Xiao <X.Xiao@motorola.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * pm854 board configuration file
+ *
+ * Please refer to doc/README.mpc85xx for more info.
+ *
+ * Make sure you change the MAC address and other network params first,
+ * search for CONFIG_ETHADDR, CONFIG_SERVERIP, etc in this file.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* High Level Configuration Options */
+#define CONFIG_BOOKE		1	/* BOOKE */
+#define CONFIG_E500		1	/* BOOKE e500 family */
+#define CONFIG_MPC85xx		1	/* MPC8540/MPC8560 */
+#define CONFIG_MPC8540		1	/* MPC8540 specific */
+#define CONFIG_PM854		1	/* PM854 board specific */
+
+#define CONFIG_PCI
+#define CONFIG_TSEC_ENET		/* tsec ethernet support */
+#define CONFIG_ENV_OVERWRITE
+#undef	CONFIG_SPD_EEPROM		/* do not use SPD EEPROM for DDR setup*/
+#define CONFIG_DDR_ECC			/* only for ECC DDR module */
+#define CONFIG_DDR_DLL			/* possible DLL fix needed */
+#define CONFIG_DDR_2T_TIMING		/* Sets the 2T timing bit */
+
+
+/*
+ * sysclk for MPC85xx
+ *
+ * Two valid values are:
+ *    33000000
+ *    66000000
+ *
+ * Most PCI cards are still 33Mhz, so in the presence of PCI, 33MHz
+ * is likely the desired value here, so that is now the default.
+ * The board, however, can run at 66MHz.  In any event, this value
+ * must match the settings of some switches.  Details can be found
+ * in the README.mpc85xxads.
+ */
+
+#ifndef CONFIG_SYS_CLK_FREQ
+#define CONFIG_SYS_CLK_FREQ	66000000
+#endif
+
+
+/*
+ * These can be toggled for performance analysis, otherwise use default.
+ */
+#define CONFIG_L2_CACHE			/* toggle L2 cache */
+#define CONFIG_BTB			/* toggle branch predition */
+#define CONFIG_ADDR_STREAMING		/* toggle addr streaming */
+
+#define CONFIG_BOARD_EARLY_INIT_F	1	/* Call board_pre_init */
+
+#undef	CFG_DRAM_TEST			/* memory test, takes time */
+#define CFG_MEMTEST_START	0x00200000	/* memtest region */
+#define CFG_MEMTEST_END		0x00400000
+
+
+/*
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ */
+#define CFG_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default */
+#define CFG_CCSRBAR		0xe0000000	/* relocated CCSRBAR */
+#define CFG_IMMR		CFG_CCSRBAR	/* PQII uses CFG_IMMR */
+
+
+/*
+ * DDR Setup
+ */
+#define CFG_DDR_SDRAM_BASE	0x00000000	/* DDR is system memory*/
+#define CFG_SDRAM_BASE		CFG_DDR_SDRAM_BASE
+
+#if defined(CONFIG_SPD_EEPROM)
+    /*
+     * Determine DDR configuration from I2C interface.
+     */
+    #define SPD_EEPROM_ADDRESS	0x51		/* DDR DIMM */
+
+#else
+    /*
+     * Manually set up DDR parameters
+     */
+    #define CFG_SDRAM_SIZE	256		/* DDR is 256 MB */
+    #define CFG_DDR_CS0_BNDS	0x0000000f	/* 0-256MB */
+    #define CFG_DDR_CS0_CONFIG	0x80000102
+    #define CFG_DDR_TIMING_1	0x47444321
+    #define CFG_DDR_TIMING_2	0x00000800	/* P9-45,may need tuning */
+    #define CFG_DDR_CONTROL	0xc2008000	/* unbuffered,no DYN_PWR */
+    #define CFG_DDR_MODE	0x00000062	/* DLL,normal,seq,4/2.5 */
+    #define CFG_DDR_INTERVAL	0x045b0100	/* autocharge,no open page */
+#endif
+
+
+/*
+ * SDRAM on the Local Bus
+ */
+#define CFG_LBC_SDRAM_BASE	0xf0000000	/* Localbus SDRAM */
+#define CFG_LBC_SDRAM_SIZE	0		/* LBC SDRAM is 0 MB */
+
+#define CFG_FLASH_BASE		0xfe000000	/* start of 32 MB FLASH */
+#define CFG_BR0_PRELIM		0xfe001801	/* port size 32bit */
+
+#define CFG_OR0_PRELIM		0xfe006f67	/* 32 MB Flash */
+#define CFG_MAX_FLASH_BANKS	1		/* number of banks */
+#define CFG_MAX_FLASH_SECT	128		/* sectors per device */
+#undef	CFG_FLASH_CHECKSUM
+#define CFG_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
+#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
+
+#define CFG_MONITOR_BASE	TEXT_BASE	/* start of monitor */
+
+
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#define CFG_RAMBOOT
+#else
+#undef	CFG_RAMBOOT
+#endif
+
+
+#undef CONFIG_CLOCKS_IN_MHZ
+
+
+/*
+ * Local Bus Definitions
+ */
+ 
+#define CFG_LBC_LCRR		0x00030004    /* LB clock ratio reg */
+#define CFG_LBC_LBCR		0x00000000    /* LB config reg */
+#define CFG_LBC_LSRT		0x20000000    /* LB sdram refresh timer */
+#define CFG_LBC_MRTPR		0x20000000    /* LB refresh timer prescal*/
+ 
+
+#define CONFIG_L1_INIT_RAM
+#define CFG_INIT_RAM_LOCK	1
+#define CFG_INIT_RAM_ADDR	0xe4010000	/* Initial RAM address */
+#define CFG_INIT_RAM_END	0x4000		/* End of used area in RAM */
+
+#define CFG_GBL_DATA_SIZE	128		/* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_LEN		(512 * 1024)	/* Reserve 512 kB for Mon */
+#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserved for malloc */
+
+/* Serial Port */
+#define CONFIG_CONS_INDEX     1
+#undef	CONFIG_SERIAL_SOFTWARE_FIFO
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE	1
+#define CFG_NS16550_CLK		get_bus_freq(0)
+
+#define CFG_BAUDRATE_TABLE  \
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
+
+#define CFG_NS16550_COM1	(CFG_CCSRBAR+0x4500)
+#define CFG_NS16550_COM2	(CFG_CCSRBAR+0x4600)
+
+/* Use the HUSH parser */
+#define CFG_HUSH_PARSER
+#ifdef	CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+/* I2C */
+#define	 CONFIG_HARD_I2C		/* I2C with hardware support*/
+#undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
+#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CFG_I2C_SLAVE		0x7F
+#define CFG_I2C_NOPROBES	{0x69}	/* Don't probe these addrs */
+
+/*
+ * EEPROM configuration
+ */
+#define CFG_I2C_EEPROM_ADDR		0x58
+#define CFG_I2C_EEPROM_ADDR_LEN		1
+#define CFG_EEPROM_PAGE_WRITE_BITS	4
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10
+
+/*
+ * RTC configuration
+ */
+#define CONFIG_RTC_PCF8563
+#define CFG_I2C_RTC_ADDR		0x51
+
+/* RapidIO MMU */
+#define CFG_RIO_MEM_BASE	0xc0000000	/* base address */
+#define CFG_RIO_MEM_PHYS	CFG_RIO_MEM_BASE
+#define CFG_RIO_MEM_SIZE	0x20000000	/* 128M */
+
+/*
+ * General PCI
+ * Addresses are mapped 1-1.
+ */
+#define CFG_PCI1_MEM_BASE	0x80000000
+#define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
+#define CFG_PCI1_MEM_SIZE	0x20000000	/* 512M */
+#define CFG_PCI1_IO_BASE	0xe2000000
+#define CFG_PCI1_IO_PHYS	CFG_PCI1_IO_BASE
+#define CFG_PCI1_IO_SIZE	0x1000000	/* 16M */
+
+#if defined(CONFIG_PCI)
+
+#define CONFIG_NET_MULTI
+#define CONFIG_PCI_PNP			/* do pci plug-and-play */
+
+#undef CONFIG_EEPRO100
+#undef CONFIG_TULIP
+
+#if !defined(CONFIG_PCI_PNP)
+    #define PCI_ENET0_IOADDR	0xe0000000
+    #define PCI_ENET0_MEMADDR	0xe0000000
+    #define PCI_IDSEL_NUMBER	0x0c	/* slot0->3(IDSEL)=12->15 */
+#endif
+
+#undef CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
+#define CFG_PCI_SUBSYS_VENDORID 0x1057	/* Motorola */
+
+#endif	/* CONFIG_PCI */
+
+
+#if defined(CONFIG_TSEC_ENET)
+
+#ifndef CONFIG_NET_MULTI
+#define CONFIG_NET_MULTI	1
+#endif
+
+#define CONFIG_MII		1	/* MII PHY management */
+#define CONFIG_MPC85XX_TSEC1	1
+#define CONFIG_MPC85XX_TSEC2	1
+#define TSEC1_PHY_ADDR		2
+#define TSEC2_PHY_ADDR		3
+#define TSEC1_PHYIDX		0
+#define TSEC2_PHYIDX		0
+
+#define CONFIG_MPC85XX_FEC	1
+#define FEC_PHY_ADDR		1
+#define FEC_PHYIDX		0
+
+#define CONFIG_ETHPRIME		"MOTO ENET0"
+
+#define	CONFIG_HAS_ETH1		1
+#define	CONFIG_HAS_ETH2		1
+
+#endif	/* CONFIG_TSEC_ENET */
+
+
+/*
+ * Environment
+ */
+#ifndef CFG_RAMBOOT
+  #define CFG_ENV_IS_IN_FLASH	1
+  #define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x80000)
+  #define CFG_ENV_SECT_SIZE	0x40000 /* 256K(one sector) for env */
+  #define CFG_ENV_SIZE		0x2000
+#else
+  #define CFG_NO_FLASH		1	/* Flash is not usable now */
+  #define CFG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
+  #define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
+  #define CFG_ENV_SIZE		0x2000
+#endif
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
+
+#if defined(CFG_RAMBOOT)
+  #if defined(CONFIG_PCI)
+    #define  CONFIG_COMMANDS	((CONFIG_CMD_DFL	\
+				 | CFG_CMD_PING		\
+				 | CFG_CMD_PCI		\
+				 | CFG_CMD_I2C)		\
+				&			\
+				 ~(CFG_CMD_ENV		\
+				  | CFG_CMD_LOADS))
+  #else
+    #define  CONFIG_COMMANDS	((CONFIG_CMD_DFL	\
+				 | CFG_CMD_PING		\
+				 | CFG_CMD_I2C)		\
+				&			\
+				 ~(CFG_CMD_ENV		\
+				  | CFG_CMD_LOADS))
+  #endif
+#else
+  #if defined(CONFIG_PCI)
+    #define  CONFIG_COMMANDS	(CONFIG_CMD_DFL		\
+				| CFG_CMD_EEPROM	\
+				| CFG_CMD_DATE		\
+				| CFG_CMD_PCI		\
+				| CFG_CMD_PING		\
+				| CFG_CMD_I2C)
+  #else
+    #define  CONFIG_COMMANDS	(CONFIG_CMD_DFL		\
+				| CFG_CMD_EEPROM	\
+				| CFG_CMD_DATE		\
+				| CFG_CMD_PING		\
+				| CFG_CMD_I2C)
+  #endif
+#endif
+
+#include <cmd_confdefs.h>
+
+#undef CONFIG_WATCHDOG			/* watchdog disabled */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP			/* undef to save memory */
+#define CFG_LOAD_ADDR	0x2000000	/* default load address */
+#define CFG_PROMPT	"=> "		/* Monitor Command Prompt */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+    #define CFG_CBSIZE	1024		/* Console I/O Buffer Size */
+#else
+    #define CFG_CBSIZE	256		/* Console I/O Buffer Size */
+#endif
+
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS	16		/* max number of command args */
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
+#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */
+#define CONFIG_LOOPW
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
+
+/* Cache Configuration */
+#define CFG_DCACHE_SIZE		32768
+#define CFG_CACHELINE_SIZE	32
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT	5	/*log base 2 of the above value*/
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM	0x02		/* Software reboot */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
+#endif
+
+
+/*
+ * Environment Configuration
+ */
+
+/* The mac addresses for all ethernet interface */
+#if defined(CONFIG_TSEC_ENET)
+#define CONFIG_ETHADDR	 00:40:42:01:00:00
+#define CONFIG_ETH1ADDR	 00:40:42:01:00:01
+#define CONFIG_ETH2ADDR	 00:40:42:01:00:02
+#endif
+
+#define CONFIG_IPADDR	 192.168.0.103
+
+#define CONFIG_HOSTNAME		PM854
+#define CONFIG_ROOTPATH		/opt/eldk30/ppc_82xx
+#define CONFIG_BOOTFILE		uImage
+
+#define CONFIG_SERVERIP	 192.168.0.54
+#define CONFIG_GATEWAYIP 192.168.0.1
+#define CONFIG_NETMASK	 255.255.255.0
+
+#define CONFIG_LOADADDR	 200000 /* default location for tftp and bootm */
+
+#define CONFIG_BOOTDELAY 5	/* -1 disables auto-boot */
+#undef	CONFIG_BOOTARGS		/* the boot command will set bootargs */
+
+#define CONFIG_BAUDRATE 9600
+
+#define CONFIG_EXTRA_ENV_SETTINGS					\
+   "netdev=eth0\0"							\
+   "consoledev=ttyS0\0"							\
+   "ramdiskaddr=400000\0"						\
+   "ramdiskfile=uRamdisk\0"
+
+#define CONFIG_NFSBOOTCOMMAND						\
+   "setenv bootargs root=/dev/nfs rw "					\
+      "nfsroot=$serverip:$rootpath "					\
+      "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+      "console=$consoledev,$baudrate $othbootargs;"			\
+   "tftp $loadaddr $bootfile;"						\
+   "bootm $loadaddr"
+
+#define CONFIG_RAMBOOTCOMMAND \
+   "setenv bootargs root=/dev/ram rw "					\
+      "console=$consoledev,$baudrate $othbootargs;"			\
+   "tftp $ramdiskaddr $ramdiskfile;"					\
+   "tftp $loadaddr $bootfile;"						\
+   "bootm $loadaddr $ramdiskaddr"
+
+#define CONFIG_BOOTCOMMAND  CONFIG_NFSBOOTCOMMAND
+
+#endif	/* __CONFIG_H */