diff options
author | Masahiro Yamada <yamada.masahiro@socionext.com> | 2017-01-28 06:53:53 +0900 |
---|---|---|
committer | Masahiro Yamada <yamada.masahiro@socionext.com> | 2017-01-29 20:59:08 +0900 |
commit | c0efc3140e75e3ffd6127a5aec97b75347ec7417 (patch) | |
tree | 84f3f3517644797c13c2e4e802db8c05e09412a5 /include/configs | |
parent | 0b93e3de1e5ec9c7db7ffcf33bc9dcaddff91109 (diff) | |
download | u-boot-imx-c0efc3140e75e3ffd6127a5aec97b75347ec7417.zip u-boot-imx-c0efc3140e75e3ffd6127a5aec97b75347ec7417.tar.gz u-boot-imx-c0efc3140e75e3ffd6127a5aec97b75347ec7417.tar.bz2 |
ARM: uniphier: change CONFIG_SPL_PAD_TO to 128KB
The Boot ROM supports authentication feature to prevent malformed
software from being run on products. The signature is added at the
tail of the second stage loader (= SPL in U-boot terminology).
The size of the second stage loader was 64KB, and it was consistent
across SoCs. The situation changed when LD20 SoC appeared; it loads
80KB second stage loader, and it is the only exception.
Currently, CONFIG_SPL_PAD_TO is set to 64KB and U-Boot proper is
loaded from the 64KB offset of non-volatile devices. This means the
signature of LD20 SoC (located at 80KB offset) corrupts the U-Boot
proper image.
Let's move the U-Boot proper image to 128KB offset. It uses 48KB
for nothing but padding, and we could actually locate the U-Boot
proper at 80KB offset. However, the power of 2 generally seems a
better choice for the offset address.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Diffstat (limited to 'include/configs')
-rw-r--r-- | include/configs/uniphier.h | 20 |
1 files changed, 13 insertions, 7 deletions
diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h index 817bf45..49309c9 100644 --- a/include/configs/uniphier.h +++ b/include/configs/uniphier.h @@ -230,19 +230,19 @@ "nor_base=0x42000000\0" \ "sramupdate=setexpr tmp_addr $nor_base + 0x50000 &&" \ "tftpboot $tmp_addr u-boot-spl.bin &&" \ - "setexpr tmp_addr $nor_base + 0x60000 &&" \ + "setexpr tmp_addr $nor_base + 0x70000 && " \ "tftpboot $tmp_addr u-boot.bin\0" \ "emmcupdate=mmcsetn &&" \ "mmc partconf $mmc_first_dev 0 1 1 &&" \ "tftpboot u-boot-spl.bin &&" \ - "mmc write $loadaddr 0 80 &&" \ + "mmc write $loadaddr 0 100 && " \ "tftpboot u-boot.bin &&" \ - "mmc write $loadaddr 80 780\0" \ + "mmc write $loadaddr 100 700\0" \ "nandupdate=nand erase 0 0x00100000 &&" \ "tftpboot u-boot-spl.bin &&" \ - "nand write $loadaddr 0 0x00010000 &&" \ + "nand write $loadaddr 0 0x00020000 && " \ "tftpboot u-boot.bin &&" \ - "nand write $loadaddr 0x00010000 0x000f0000\0" \ + "nand write $loadaddr 0x00020000 0x000e0000\0" \ LINUXBOOT_ENV_SETTINGS #define CONFIG_SYS_BOOTMAPSZ 0x20000000 @@ -282,14 +282,18 @@ #define CONFIG_SPL_BOARD_INIT -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x10000 +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x20000 /* subtract sizeof(struct image_header) */ -#define CONFIG_SYS_UBOOT_BASE (0x60000 - 0x40) +#define CONFIG_SYS_UBOOT_BASE (0x70000 - 0x40) #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" #define CONFIG_SPL_MAX_FOOTPRINT 0x10000 +#if defined(CONFIG_ARCH_UNIPHIER_LD20) +#define CONFIG_SPL_MAX_SIZE 0x14000 +#else #define CONFIG_SPL_MAX_SIZE 0x10000 +#endif #if defined(CONFIG_ARCH_UNIPHIER_LD11) #define CONFIG_SPL_BSS_START_ADDR 0x30012000 #elif defined(CONFIG_ARCH_UNIPHIER_LD20) @@ -297,4 +301,6 @@ #endif #define CONFIG_SPL_BSS_MAX_SIZE 0x2000 +#define CONFIG_SPL_PAD_TO 0x20000 + #endif /* __CONFIG_UNIPHIER_COMMON_H__ */ |