summaryrefslogtreecommitdiff
path: root/include/configs
diff options
context:
space:
mode:
authorStefano Babic <sbabic@denx.de>2014-08-08 10:18:40 +0200
committerStefano Babic <sbabic@denx.de>2014-08-08 10:18:40 +0200
commitc23154aab5825fec81d5500c53eaa686646c76b5 (patch)
tree32b0aafae49f664a65ced50981492bb031f006b8 /include/configs
parentcb07d74e2e0c0a41533b6bcd551af9bf2ebcf2bc (diff)
parent9d195a546179bc732aba9eacccf0a9a3db591288 (diff)
downloadu-boot-imx-c23154aab5825fec81d5500c53eaa686646c76b5.zip
u-boot-imx-c23154aab5825fec81d5500c53eaa686646c76b5.tar.gz
u-boot-imx-c23154aab5825fec81d5500c53eaa686646c76b5.tar.bz2
Merge branch 'master' of git://git.denx.de/u-boot-arm
Diffstat (limited to 'include/configs')
-rw-r--r--include/configs/ELPPC.h4
-rw-r--r--include/configs/MHPC.h4
-rw-r--r--include/configs/alt.h166
-rw-r--r--include/configs/am335x_evm.h8
-rw-r--r--include/configs/am3517_crane.h7
-rw-r--r--include/configs/am3517_evm.h7
-rw-r--r--include/configs/am43xx_evm.h2
-rw-r--r--include/configs/cm_t335.h5
-rw-r--r--include/configs/cm_t35.h3
-rw-r--r--include/configs/devkit8000.h2
-rw-r--r--include/configs/dig297.h4
-rw-r--r--include/configs/edminiv2.h3
-rw-r--r--include/configs/h2200.h1
-rw-r--r--include/configs/jadecpu.h4
-rw-r--r--include/configs/k2e_evm.h37
-rw-r--r--include/configs/k2hk_evm.h253
-rw-r--r--include/configs/ks2_evm.h275
-rw-r--r--include/configs/mcx.h4
-rw-r--r--include/configs/nokia_rx51.h7
-rw-r--r--include/configs/omap3_beagle.h15
-rw-r--r--include/configs/omap3_evm_common.h7
-rw-r--r--include/configs/omap3_igep00x0.h10
-rw-r--r--include/configs/omap3_logic.h8
-rw-r--r--include/configs/omap3_overo.h12
-rw-r--r--include/configs/omap3_pandora.h7
-rw-r--r--include/configs/omap3_zoom1.h13
-rw-r--r--include/configs/pengwyn.h6
-rw-r--r--include/configs/rpi_b.h2
-rw-r--r--include/configs/sandbox.h4
-rw-r--r--include/configs/sun4i.h24
-rw-r--r--include/configs/sun5i.h24
-rw-r--r--include/configs/sun7i.h1
-rw-r--r--include/configs/sunxi-common.h27
-rw-r--r--include/configs/tam3517-common.h4
-rw-r--r--include/configs/tao3530.h8
-rw-r--r--include/configs/ti_armv7_common.h8
-rw-r--r--include/configs/tricorder.h4
-rw-r--r--include/configs/zynq-common.h2
38 files changed, 645 insertions, 337 deletions
diff --git a/include/configs/ELPPC.h b/include/configs/ELPPC.h
index 0ffbd41..debfc36 100644
--- a/include/configs/ELPPC.h
+++ b/include/configs/ELPPC.h
@@ -234,8 +234,8 @@
#define CONFIG_VIDEO
#define CONFIG_CFB_CONSOLE
#define VIDEO_KBD_INIT_FCT (simple_strtol (getenv("console"), NULL, 10))
-#define VIDEO_TSTC_FCT serial_tstc
-#define VIDEO_GETC_FCT serial_getc
+#define VIDEO_TSTC_FCT serial_stub_tstc
+#define VIDEO_GETC_FCT serial_stub_getc
#define CONFIG_VIDEO_SMI_LYNXEM
#define CONFIG_VIDEO_LOGO
diff --git a/include/configs/MHPC.h b/include/configs/MHPC.h
index 6314b53..d45be0f 100644
--- a/include/configs/MHPC.h
+++ b/include/configs/MHPC.h
@@ -96,8 +96,8 @@
#define CONFIG_VIDEO_LOGO
#define VIDEO_KBD_INIT_FCT 0 /* no KBD dev on MHPC - use serial */
-#define VIDEO_TSTC_FCT serial_tstc
-#define VIDEO_GETC_FCT serial_getc
+#define VIDEO_TSTC_FCT serial_stub_tstc
+#define VIDEO_GETC_FCT serial_stub_getc
#define CONFIG_BR0_WORKAROUND 1
diff --git a/include/configs/alt.h b/include/configs/alt.h
new file mode 100644
index 0000000..9eec4bc
--- /dev/null
+++ b/include/configs/alt.h
@@ -0,0 +1,166 @@
+/*
+ * include/configs/alt.h
+ * This file is alt board configuration.
+ *
+ * Copyright (C) 2014 Renesas Electronics Corporation
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef __ALT_H
+#define __ALT_H
+
+#undef DEBUG
+#define CONFIG_ARMV7
+#define CONFIG_R8A7794
+#define CONFIG_RMOBILE
+#define CONFIG_RMOBILE_BOARD_STRING "Alt"
+#define CONFIG_SH_GPIO_PFC
+
+#include <asm/arch/rmobile.h>
+
+#define CONFIG_CMD_EDITENV
+#define CONFIG_CMD_SAVEENV
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_DFL
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_RUN
+#define CONFIG_CMD_LOADS
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_BOOTZ
+#define CONFIG_CMD_SF
+#define CONFIG_CMD_SPI
+
+#define CONFIG_SYS_TEXT_BASE 0xE6304000
+#define CONFIG_SYS_THUMB_BUILD
+#define CONFIG_SYS_GENERIC_BOARD
+
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define CONFIG_CMDLINE_EDITING
+
+#define CONFIG_OF_LIBFDT
+#define BOARD_LATE_INIT
+
+#define CONFIG_BAUDRATE 38400
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_BOOTARGS ""
+
+#define CONFIG_VERSION_VARIABLE
+#undef CONFIG_SHOW_BOOT_PROGRESS
+
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_TMU_TIMER
+
+#define CONFIG_SYS_INIT_SP_ADDR 0xE633FFFC
+#define STACK_AREA_SIZE 0xC000
+#define LOW_LEVEL_MERAM_STACK \
+ (CONFIG_SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4)
+
+/* MEMORY */
+#define ALT_SDRAM_BASE 0x40000000
+#define ALT_SDRAM_SIZE (1024u * 1024 * 1024)
+#define ALT_UBOOT_SDRAM_SIZE (512 * 1024 * 1024)
+
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_CBSIZE 256
+#define CONFIG_SYS_PBSIZE 256
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_BARGSIZE 512
+#define CONFIG_SYS_BAUDRATE_TABLE { 38400, 115200 }
+
+/* SCIF */
+#define CONFIG_SCIF_CONSOLE
+#define CONFIG_CONS_SCIF2
+#undef CONFIG_SYS_CONSOLE_INFO_QUIET
+#undef CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
+#undef CONFIG_SYS_CONSOLE_ENV_OVERWRITE
+
+#define CONFIG_SYS_MEMTEST_START (ALT_SDRAM_BASE)
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \
+ 504 * 1024 * 1024)
+#undef CONFIG_SYS_ALT_MEMTEST
+#undef CONFIG_SYS_MEMTEST_SCRATCH
+#undef CONFIG_SYS_LOADS_BAUD_CHANGE
+
+#define CONFIG_SYS_SDRAM_BASE (ALT_SDRAM_BASE)
+#define CONFIG_SYS_SDRAM_SIZE (ALT_UBOOT_SDRAM_SIZE)
+#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fc0)
+#define CONFIG_NR_DRAM_BANKS 1
+
+#define CONFIG_SYS_MONITOR_BASE 0x00000000
+#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
+#define CONFIG_SYS_MALLOC_LEN (1 * 1024 * 1024)
+#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024)
+
+/* FLASH */
+#define CONFIG_SPI
+#define CONFIG_SPI_FLASH_BAR
+#define CONFIG_SH_QSPI
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_SPANSION
+#define CONFIG_SPI_FLASH_QUAD
+#define CONFIG_SYS_NO_FLASH
+
+/* ENV setting */
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_SECT_SIZE (256 * 1024)
+#define CONFIG_ENV_ADDR 0xC0000
+#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR)
+#define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE)
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "bootm_low=0x40e00000\0" \
+ "bootm_size=0x100000\0" \
+
+/* SH Ether */
+#define CONFIG_NET_MULTI
+#define CONFIG_SH_ETHER
+#define CONFIG_SH_ETHER_USE_PORT 0
+#define CONFIG_SH_ETHER_PHY_ADDR 0x1
+#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_RMII
+#define CONFIG_SH_ETHER_CACHE_WRITEBACK
+#define CONFIG_SH_ETHER_CACHE_INVALIDATE
+#define CONFIG_SH_ETHER_ALIGNE_SIZE 64
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_MICREL
+#define CONFIG_BITBANGMII
+#define CONFIG_BITBANGMII_MULTI
+
+/* Board Clock */
+#define RMOBILE_XTAL_CLK 20000000u
+#define CONFIG_SYS_CLK_FREQ RMOBILE_XTAL_CLK
+#define CONFIG_SH_TMU_CLK_FREQ (CONFIG_SYS_CLK_FREQ / 2) /* EXT / 2 */
+#define CONFIG_PLL1_CLK_FREQ (CONFIG_SYS_CLK_FREQ * 156 / 2)
+#define CONFIG_P_CLK_FREQ (CONFIG_PLL1_CLK_FREQ / 24)
+#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_P_CLK_FREQ
+
+#define CONFIG_SYS_TMU_CLK_DIV 4
+
+/* i2c */
+#define CONFIG_CMD_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SH
+#define CONFIG_SYS_I2C_SLAVE 0x7F
+#define CONFIG_SYS_I2C_SH_NUM_CONTROLLERS 3
+#define CONFIG_SYS_I2C_SH_BASE0 0xE6500000
+#define CONFIG_SYS_I2C_SH_SPEED0 400000
+#define CONFIG_SYS_I2C_SH_BASE1 0xE6510000
+#define CONFIG_SYS_I2C_SH_SPEED1 400000
+#define CONFIG_SYS_I2C_SH_BASE2 0xE60B0000
+#define CONFIG_SYS_I2C_SH_SPEED2 400000
+#define CONFIG_SH_I2C_DATA_HIGH 4
+#define CONFIG_SH_I2C_DATA_LOW 5
+#define CONFIG_SH_I2C_CLOCK 10000000
+
+#define CONFIG_SYS_I2C_POWERIC_ADDR 0x58 /* da9063 */
+
+#endif /* __ALT_H */
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index a48b386..35ae0e6 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -117,7 +117,7 @@
"bootenv=uEnv.txt\0" \
"loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
"importbootenv=echo Importing environment from mmc ...; " \
- "env import -t $loadaddr $filesize\0" \
+ "env import -t -r $loadaddr $filesize\0" \
"ramargs=setenv bootargs console=${console} " \
"${optargs} " \
"root=${ramroot} " \
@@ -254,6 +254,11 @@
#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
+#ifdef CONFIG_SPL_OS_BOOT
+#define CONFIG_CMD_SPL_NAND_OFS 0x00080000 /* os parameters */
+#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 /* kernel offset */
+#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000
+#endif
#endif
#endif
@@ -453,6 +458,7 @@
#define CONFIG_SYS_MAX_FLASH_BANKS 1
#define CONFIG_SYS_FLASH_BASE (0x08000000)
#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
+#define CONFIG_SYS_FLASH_SIZE 0x01000000
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
/* Reduce SPL size by removing unlikey targets */
#ifdef CONFIG_NOR_BOOT
diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h
index ad4cbd8..d826214 100644
--- a/include/configs/am3517_crane.h
+++ b/include/configs/am3517_crane.h
@@ -252,17 +252,12 @@
*/
/* **** PISMO SUPPORT *** */
-
-/* Configure the PISMO */
-#define PISMO1_NAND_SIZE GPMC_SIZE_128M
-#define PISMO1_ONEN_SIZE GPMC_SIZE_128M
-
#define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors */
/* on one chip */
#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */
-#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE
+#define CONFIG_SYS_FLASH_BASE NAND_BASE
/* Monitor at start of flash */
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
index 0102ff5..a9c5a8f 100644
--- a/include/configs/am3517_evm.h
+++ b/include/configs/am3517_evm.h
@@ -259,18 +259,13 @@
*/
/* **** PISMO SUPPORT *** */
-
-/* Configure the PISMO */
-#define PISMO1_NAND_SIZE GPMC_SIZE_128M
-#define PISMO1_ONEN_SIZE GPMC_SIZE_128M
-
#define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors */
/* on one chip */
#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */
#if defined(CONFIG_CMD_NAND)
-#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE
+#define CONFIG_SYS_FLASH_BASE NAND_BASE
#endif
/* Monitor at start of flash */
diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h
index 974ce98..e262040 100644
--- a/include/configs/am43xx_evm.h
+++ b/include/configs/am43xx_evm.h
@@ -33,6 +33,8 @@
#define CONFIG_SYS_I2C_MULTI_EEPROMS
/* Power */
+#define CONFIG_POWER
+#define CONFIG_POWER_I2C
#define CONFIG_POWER_TPS65218
/* SPL defines. */
diff --git a/include/configs/cm_t335.h b/include/configs/cm_t335.h
index 4d1dd28..a3e6452 100644
--- a/include/configs/cm_t335.h
+++ b/include/configs/cm_t335.h
@@ -150,6 +150,11 @@
#define CONFIG_ENV_OFFSET 0x300000 /* environment starts here */
#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */
#define CONFIG_SYS_NAND_ONFI_DETECTION
+#ifdef CONFIG_SPL_OS_BOOT
+#define CONFIG_CMD_SPL_NAND_OFS 0x400000 /* un-assigned: (using dtb) */
+#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x500000
+#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000
+#endif
/* GPIO pin + bank to pin ID mapping */
#define GPIO_PIN(_bank, _pin) ((_bank << 5) + _pin)
diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h
index 5c484ef..d8d71a9 100644
--- a/include/configs/cm_t35.h
+++ b/include/configs/cm_t35.h
@@ -258,9 +258,6 @@
*/
/* **** PISMO SUPPORT *** */
-/* Configure the PISMO */
-#define PISMO1_NAND_SIZE GPMC_SIZE_128M
-
/* Monitor at start of flash */
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */
diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h
index 5308790..cc53fc9 100644
--- a/include/configs/devkit8000.h
+++ b/include/configs/devkit8000.h
@@ -262,8 +262,6 @@
#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1
/* NAND and environment organization */
-#define PISMO1_NAND_SIZE GPMC_SIZE_128M
-
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */
#define CONFIG_ENV_IS_IN_NAND 1
diff --git a/include/configs/dig297.h b/include/configs/dig297.h
index ce205e9..7e47c56 100644
--- a/include/configs/dig297.h
+++ b/include/configs/dig297.h
@@ -251,10 +251,6 @@
*/
/* **** PISMO SUPPORT *** */
-
-/* Configure the PISMO */
-#define PISMO1_NAND_SIZE GPMC_SIZE_128M
-
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */
#define CONFIG_SYS_FLASH_BASE boot_flash_base
diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h
index 8b9f66a..77717a8 100644
--- a/include/configs/edminiv2.h
+++ b/include/configs/edminiv2.h
@@ -187,7 +187,8 @@
* I2C related stuff
*/
#ifdef CONFIG_CMD_I2C
-#define CONFIG_I2C_MVTWSI
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MVTWSI
#define CONFIG_I2C_MVTWSI_BASE ORION5X_TWSI_BASE
#define CONFIG_SYS_I2C_SLAVE 0x0
#define CONFIG_SYS_I2C_SPEED 100000
diff --git a/include/configs/h2200.h b/include/configs/h2200.h
index 5d0b85e..9470ad6 100644
--- a/include/configs/h2200.h
+++ b/include/configs/h2200.h
@@ -123,6 +123,7 @@
#define CONFIG_CMD_IMI
#define CONFIG_FIT
+#define CONFIG_FIT_DISABLE_SHA256
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_CMDLINE_TAG
#define CONFIG_INITRD_TAG
diff --git a/include/configs/jadecpu.h b/include/configs/jadecpu.h
index b34e342..759e112 100644
--- a/include/configs/jadecpu.h
+++ b/include/configs/jadecpu.h
@@ -87,8 +87,8 @@
#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (800*480 + 256*4 + 10*1024)
#define VIDEO_FB_16BPP_WORD_SWAP
#define VIDEO_KBD_INIT_FCT 0
-#define VIDEO_TSTC_FCT serial_tstc
-#define VIDEO_GETC_FCT serial_getc
+#define VIDEO_TSTC_FCT serial_stub_tstc
+#define VIDEO_GETC_FCT serial_stub_getc
/*
* BOOTP options
diff --git a/include/configs/k2e_evm.h b/include/configs/k2e_evm.h
new file mode 100644
index 0000000..3502d10
--- /dev/null
+++ b/include/configs/k2e_evm.h
@@ -0,0 +1,37 @@
+/*
+ * Configuration header file for TI's k2e-evm
+ *
+ * (C) Copyright 2012-2014
+ * Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_K2E_EVM_H
+#define __CONFIG_K2E_EVM_H
+
+/* Platform type */
+#define CONFIG_SOC_K2E
+#define CONFIG_K2E_EVM
+
+/* U-Boot general configuration */
+#define CONFIG_SYS_PROMPT "K2E EVM # "
+
+#define KS2_ARGS_UBI "args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs "\
+ "root=ubi0:rootfs rootflags=sync rw ubi.mtd=2,2048\0"
+
+#define KS2_FDT_NAME "name_fdt=k2e-evm.dtb\0"
+#define KS2_ADDR_MON "addr_mon=0x0c140000\0"
+#define KS2_NAME_MON "name_mon=skern-k2e-evm.bin\0"
+#define NAME_UBOOT "name_uboot=u-boot-spi-k2e-evm.gph\0"
+#define NAME_UBI "name_ubi=k2e-evm-ubifs.ubi\0"
+
+#include <configs/ks2_evm.h>
+
+/* SPL SPI Loader Configuration */
+#define CONFIG_SPL_TEXT_BASE 0x0c100000
+
+/* NAND Configuration */
+#define CONFIG_SYS_NAND_PAGE_2K
+
+#endif /* __CONFIG_K2E_EVM_H */
diff --git a/include/configs/k2hk_evm.h b/include/configs/k2hk_evm.h
index 858329f..8aa616d 100644
--- a/include/configs/k2hk_evm.h
+++ b/include/configs/k2hk_evm.h
@@ -14,252 +14,27 @@
#define CONFIG_SOC_K2HK
#define CONFIG_K2HK_EVM
-/* U-Boot Build Configuration */
-#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is a 2nd stage loader */
-#define CONFIG_SYS_NO_FLASH /* that is, no *NOR* flash */
-#define CONFIG_SYS_CONSOLE_INFO_QUIET
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_SYS_THUMB_BUILD
-
-/* SoC Configuration */
-#define CONFIG_ARMV7
-#define CONFIG_ARCH_CPU_INIT
-#define CONFIG_SYS_ARCH_TIMER
-#define CONFIG_SYS_HZ 1000
-#define CONFIG_SYS_TEXT_BASE 0x0c001000
-#define CONFIG_SPL_TARGET "u-boot-spi.gph"
-#define CONFIG_SYS_DCACHE_OFF
-
-/* Memory Configuration */
-#define CONFIG_NR_DRAM_BANKS 2
-#define CONFIG_SYS_SDRAM_BASE 0x80000000
-#define CONFIG_SYS_LPAE_SDRAM_BASE 0x800000000
-#define CONFIG_MAX_RAM_BANK_SIZE (2 << 30) /* 2GB */
-#define CONFIG_STACKSIZE (512 << 10) /* 512 KiB */
-#define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4 MiB */
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE - \
- GENERATED_GBL_DATA_SIZE)
-
-/* SPL SPI Loader Configuration */
-#define CONFIG_SPL_TEXT_BASE 0x0c200000
-#define CONFIG_SPL_PAD_TO 65536
-#define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_PAD_TO - 8)
-#define CONFIG_SPL_BSS_START_ADDR (CONFIG_SPL_TEXT_BASE + \
- CONFIG_SPL_MAX_SIZE)
-#define CONFIG_SPL_BSS_MAX_SIZE (32 * 1024)
-#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \
- CONFIG_SPL_BSS_MAX_SIZE)
-#define CONFIG_SYS_SPL_MALLOC_SIZE (32 * 1024)
-#define CONFIG_SPL_STACK_SIZE (8 * 1024)
-#define CONFIG_SPL_STACK (CONFIG_SYS_SPL_MALLOC_START + \
- CONFIG_SYS_SPL_MALLOC_SIZE + \
- CONFIG_SPL_STACK_SIZE - 4)
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_SPI_FLASH_SUPPORT
-#define CONFIG_SPL_SPI_SUPPORT
-#define CONFIG_SPL_BOARD_INIT
-#define CONFIG_SPL_SPI_LOAD
-#define CONFIG_SPL_SPI_BUS 0
-#define CONFIG_SPL_SPI_CS 0
-#define CONFIG_SYS_SPI_U_BOOT_OFFS CONFIG_SPL_PAD_TO
-#define CONFIG_SPL_FRAMEWORK
-
-/* UART Configuration */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_MEM32
-#define CONFIG_SYS_NS16550_REG_SIZE -4
-#define CONFIG_SYS_NS16550_COM1 KS2_UART0_BASE
-#define CONFIG_SYS_NS16550_COM2 KS2_UART1_BASE
-#define CONFIG_SYS_NS16550_CLK clk_get_rate(K2HK_CLK1_6)
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 115200
-
-/* SPI Configuration */
-#define CONFIG_SPI
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_STMICRO
-#define CONFIG_DAVINCI_SPI
-#define CONFIG_SYS_SPI0
-#define CONFIG_SYS_SPI_BASE K2HK_SPI_BASE
-#define CONFIG_SYS_SPI0_NUM_CS 4
-#define CONFIG_SYS_SPI1
-#define CONFIG_SYS_SPI1_BASE K2HK_SPI1_BASE
-#define CONFIG_SYS_SPI1_NUM_CS 4
-#define CONFIG_SYS_SPI2
-#define CONFIG_SYS_SPI2_NUM_CS 4
-#define CONFIG_SYS_SPI2_BASE K2HK_SPI2_BASE
-#define CONFIG_CMD_SPI
-#define CONFIG_SYS_SPI_CLK clk_get_rate(K2HK_LPSC_EMIF25_SPI)
-#define CONFIG_SF_DEFAULT_SPEED 30000000
-#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
+/* U-Boot general configuration */
+#define CONFIG_SYS_PROMPT "K2HK EVM # "
-/* I2C Configuration */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_DAVINCI
-#define CONFIG_SYS_DAVINCI_I2C_SPEED 100000
-#define CONFIG_SYS_DAVINCI_I2C_SLAVE 0x10 /* SMBus host address */
-#define CONFIG_SYS_DAVINCI_I2C_SPEED1 100000
-#define CONFIG_SYS_DAVINCI_I2C_SLAVE1 0x10 /* SMBus host address */
-#define CONFIG_SYS_DAVINCI_I2C_SPEED2 100000
-#define CONFIG_SYS_DAVINCI_I2C_SLAVE2 0x10 /* SMBus host address */
-#define I2C_BUS_MAX 3
+#define KS2_ARGS_UBI "args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs "\
+ "root=ubi0:rootfs rootflags=sync rw ubi.mtd=2,2048\0"
-/* EEPROM definitions */
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20
-#define CONFIG_ENV_EEPROM_IS_ON_I2C
+#define KS2_FDT_NAME "name_fdt=k2hk-evm.dtb\0"
+#define KS2_ADDR_MON "addr_mon=0x0c5f0000\0"
+#define KS2_NAME_MON "name_mon=skern-k2hk-evm.bin\0"
+#define NAME_UBOOT "name_uboot=u-boot-spi-k2hk-evm.gph\0"
+#define NAME_UBI "name_ubi=k2hk-evm-ubifs.ubi\0"
-/* Network Configuration */
-#define CONFIG_DRIVER_TI_KEYSTONE_NET
-#define CONFIG_MII
-#define CONFIG_BOOTP_DEFAULT
-#define CONFIG_BOOTP_DNS
-#define CONFIG_BOOTP_DNS2
-#define CONFIG_BOOTP_SEND_HOSTNAME
-#define CONFIG_NET_RETRY_COUNT 32
-#define CONFIG_NET_MULTI
-#define CONFIG_GET_LINK_STATUS_ATTEMPTS 5
-#define CONFIG_SYS_SGMII_REFCLK_MHZ 312
-#define CONFIG_SYS_SGMII_LINERATE_MHZ 1250
-#define CONFIG_SYS_SGMII_RATESCALE 2
+#include <configs/ks2_evm.h>
-/* AEMIF */
-#define CONFIG_TI_AEMIF
-#define CONFIG_AEMIF_CNTRL_BASE KS2_AEMIF_CNTRL_BASE
+/* SPL SPI Loader Configuration */
+#define CONFIG_SPL_TEXT_BASE 0x0c200000
/* NAND Configuration */
-#define CONFIG_NAND_DAVINCI
-#define CONFIG_CMD_NAND_ECCLAYOUT
-#define CONFIG_SYS_NAND_CS 2
-#define CONFIG_SYS_NAND_USE_FLASH_BBT
-#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
#define CONFIG_SYS_NAND_PAGE_2K
-#define CONFIG_SYS_NAND_MASK_CLE 0x4000
-#define CONFIG_SYS_NAND_MASK_ALE 0x2000
-
-#define CONFIG_SYS_NAND_LARGEPAGE
-#define CONFIG_SYS_NAND_BASE_LIST { 0x30000000, }
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_SYS_NAND_MAX_CHIPS 1
-#define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE
-#define CONFIG_ENV_SIZE (256 << 10) /* 256 KiB */
-#define CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_OFFSET 0x100000
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_MTD_DEVICE
-#define CONFIG_RBTREE
-#define CONFIG_LZO
-#define MTDPARTS_DEFAULT "mtdparts=davinci_nand.0:" \
- "1024k(bootloader)ro,512k(params)ro," \
- "-(ubifs)"
-/* U-Boot command configuration */
-#include <config_cmd_default.h>
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SAVES
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_UBI
-#define CONFIG_CMD_UBIFS
-#define CONFIG_CMD_SF
-#define CONFIG_CMD_EEPROM
-
-/* U-Boot general configuration */
-#define CONFIG_SYS_GENERIC_BOARD
-#define CONFIG_SYS_PROMPT "K2HK EVM # "
-#define CONFIG_SYS_CBSIZE 1024
-#define CONFIG_SYS_PBSIZE 2048
-#define CONFIG_SYS_MAXARGS 16
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CRC32_VERIFY
-#define CONFIG_MX_CYCLIC
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_VERSION_VARIABLE
-#define CONFIG_TIMESTAMP
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_BOOTFILE "uImage"
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "boot=ramfs\0" \
- "tftp_root=/\0" \
- "nfs_root=/export\0" \
- "mem_lpae=1\0" \
- "mem_reserve=512M\0" \
- "addr_fdt=0x87000000\0" \
- "addr_kern=0x88000000\0" \
- "addr_mon=0x0c5f0000\0" \
- "addr_uboot=0x87000000\0" \
- "addr_fs=0x82000000\0" \
- "addr_ubi=0x82000000\0" \
- "fdt_high=0xffffffff\0" \
- "name_fdt=uImage-k2hk-evm.dtb\0" \
- "name_fs=arago-console-image.cpio.gz\0" \
- "name_kern=uImage-keystone-evm.bin\0" \
- "name_mon=skern-keystone-evm.bin\0" \
- "name_uboot=u-boot-spi-keystone-evm.gph\0" \
- "name_ubi=keystone-evm-ubifs.ubi\0" \
- "run_mon=mon_install ${addr_mon}\0" \
- "run_kern=bootm ${addr_kern} - ${addr_fdt}\0" \
- "init_net=run args_all args_net\0" \
- "init_ubi=run args_all args_ubi; " \
- "ubi part ubifs; ubifsmount boot\0" \
- "get_fdt_net=dhcp ${addr_fdt} ${tftp_root}/${name_fdt}\0" \
- "get_fdt_ubi=ubifsload ${addr_fdt} ${name_fdt}\0" \
- "get_kern_net=dhcp ${addr_kern} ${tftp_root}/${name_kern}\0" \
- "get_kern_ubi=ubifsload ${addr_kern} ${name_kern}\0" \
- "get_mon_net=dhcp ${addr_mon} ${tftp_root}/${name_mon}\0" \
- "get_mon_ubi=ubifsload ${addr_mon} ${name_mon}\0" \
- "get_uboot_net=dhcp ${addr_uboot} ${tftp_root}/${name_uboot}\0" \
- "burn_uboot=sf probe; sf erase 0 0x100000; " \
- "sf write ${addr_uboot} 0 ${filesize}\0" \
- "args_all=setenv bootargs console=ttyS0,115200n8 rootwait=1\0" \
- "args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs " \
- "root=ubi0:rootfs rootflags=sync rw ubi.mtd=2,2048\0" \
- "args_net=setenv bootargs ${bootargs} rootfstype=nfs " \
- "root=/dev/nfs rw nfsroot=${serverip}:${nfs_root}," \
- "${nfs_options} ip=dhcp\0" \
- "nfs_options=v3,tcp,rsize=4096,wsize=4096\0" \
- "get_fdt_ramfs=dhcp ${addr_fdt} ${tftp_root}/${name_fdt}\0" \
- "get_kern_ramfs=dhcp ${addr_kern} ${tftp_root}/${name_kern}\0" \
- "get_mon_ramfs=dhcp ${addr_mon} ${tftp_root}/${name_mon}\0" \
- "get_fs_ramfs=dhcp ${addr_fs} ${tftp_root}/${name_fs}\0" \
- "get_ubi_net=dhcp ${addr_ubi} ${tftp_root}/${name_ubi}\0" \
- "burn_ubi=nand erase.part ubifs; " \
- "nand write ${addr_ubi} ubifs ${filesize}\0" \
- "init_ramfs=run args_all args_ramfs get_fs_ramfs\0" \
- "args_ramfs=setenv bootargs ${bootargs} earlyprintk " \
- "rdinit=/sbin/init rw root=/dev/ram0 " \
- "initrd=0x802000000,9M\0" \
- "no_post=1\0" \
- "mtdparts=mtdparts=davinci_nand.0:" \
- "1024k(bootloader)ro,512k(params)ro,522752k(ubifs)\0"
-#define CONFIG_BOOTCOMMAND \
- "run init_${boot} get_fdt_${boot} get_mon_${boot} " \
- "get_kern_${boot} run_mon run_kern"
-#define CONFIG_BOOTARGS \
-
-/* Linux interfacing */
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_OF_LIBFDT 1
-#define CONFIG_OF_BOARD_SETUP
-#define CONFIG_SYS_BARGSIZE 1024
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x08000000)
-
-#define CONFIG_SUPPORT_RAW_INITRD
-
-/* we may include files below only after all above definitions */
-#include <asm/arch/hardware.h>
-#include <asm/arch/clock.h>
-#define CONFIG_SYS_HZ_CLOCK clk_get_rate(K2HK_CLK1_6)
+/* Network */
+#define CONFIG_DRIVER_TI_KEYSTONE_NET
#endif /* __CONFIG_K2HK_EVM_H */
diff --git a/include/configs/ks2_evm.h b/include/configs/ks2_evm.h
new file mode 100644
index 0000000..43db581
--- /dev/null
+++ b/include/configs/ks2_evm.h
@@ -0,0 +1,275 @@
+/*
+ * Common configuration header file for all Keystone II EVM platforms
+ *
+ * (C) Copyright 2012-2014
+ * Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_KS2_EVM_H
+#define __CONFIG_KS2_EVM_H
+
+#define CONFIG_SOC_KEYSTONE
+
+/* U-Boot Build Configuration */
+#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is a 2nd stage loader */
+#define CONFIG_SYS_NO_FLASH /* that is, no *NOR* flash */
+#define CONFIG_SYS_CONSOLE_INFO_QUIET
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_SYS_THUMB_BUILD
+
+/* SoC Configuration */
+#define CONFIG_ARMV7
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_SYS_ARCH_TIMER
+#define CONFIG_SYS_HZ 1000
+#define CONFIG_SYS_TEXT_BASE 0x0c001000
+#define CONFIG_SPL_TARGET "u-boot-spi.gph"
+#define CONFIG_SYS_DCACHE_OFF
+
+/* Memory Configuration */
+#define CONFIG_NR_DRAM_BANKS 2
+#define CONFIG_SYS_SDRAM_BASE 0x80000000
+#define CONFIG_SYS_LPAE_SDRAM_BASE 0x800000000
+#define CONFIG_MAX_RAM_BANK_SIZE (2 << 30) /* 2GB */
+#define CONFIG_STACKSIZE (512 << 10) /* 512 KiB */
+#define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4 MiB */
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE - \
+ GENERATED_GBL_DATA_SIZE)
+
+/* SPL SPI Loader Configuration */
+#define CONFIG_SPL_PAD_TO 65536
+#define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_PAD_TO - 8)
+#define CONFIG_SPL_BSS_START_ADDR (CONFIG_SPL_TEXT_BASE + \
+ CONFIG_SPL_MAX_SIZE)
+#define CONFIG_SPL_BSS_MAX_SIZE (32 * 1024)
+#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \
+ CONFIG_SPL_BSS_MAX_SIZE)
+#define CONFIG_SYS_SPL_MALLOC_SIZE (32 * 1024)
+#define CONFIG_SPL_STACK_SIZE (8 * 1024)
+#define CONFIG_SPL_STACK (CONFIG_SYS_SPL_MALLOC_START + \
+ CONFIG_SYS_SPL_MALLOC_SIZE + \
+ CONFIG_SPL_STACK_SIZE - 4)
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SPI_FLASH_SUPPORT
+#define CONFIG_SPL_SPI_SUPPORT
+#define CONFIG_SPL_BOARD_INIT
+#define CONFIG_SPL_SPI_LOAD
+#define CONFIG_SPL_SPI_BUS 0
+#define CONFIG_SPL_SPI_CS 0
+#define CONFIG_SYS_SPI_U_BOOT_OFFS CONFIG_SPL_PAD_TO
+#define CONFIG_SPL_FRAMEWORK
+
+/* UART Configuration */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_MEM32
+#define CONFIG_SYS_NS16550_REG_SIZE -4
+#define CONFIG_SYS_NS16550_COM1 KS2_UART0_BASE
+#define CONFIG_SYS_NS16550_COM2 KS2_UART1_BASE
+#define CONFIG_SYS_NS16550_CLK clk_get_rate(KS2_CLK1_6)
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_BAUDRATE 115200
+
+/* SPI Configuration */
+#define CONFIG_SPI
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_STMICRO
+#define CONFIG_DAVINCI_SPI
+#define CONFIG_CMD_SPI
+#define CONFIG_SYS_SPI_CLK clk_get_rate(KS2_CLK1_6)
+#define CONFIG_SF_DEFAULT_SPEED 30000000
+#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
+#define CONFIG_SYS_SPI0
+#define CONFIG_SYS_SPI_BASE KS2_SPI0_BASE
+#define CONFIG_SYS_SPI0_NUM_CS 4
+#define CONFIG_SYS_SPI1
+#define CONFIG_SYS_SPI1_BASE KS2_SPI1_BASE
+#define CONFIG_SYS_SPI1_NUM_CS 4
+#define CONFIG_SYS_SPI2
+#define CONFIG_SYS_SPI2_BASE KS2_SPI2_BASE
+#define CONFIG_SYS_SPI2_NUM_CS 4
+
+/* Network Configuration */
+#define CONFIG_MII
+#define CONFIG_BOOTP_DEFAULT
+#define CONFIG_BOOTP_DNS
+#define CONFIG_BOOTP_DNS2
+#define CONFIG_BOOTP_SEND_HOSTNAME
+#define CONFIG_NET_RETRY_COUNT 32
+#define CONFIG_NET_MULTI
+#define CONFIG_GET_LINK_STATUS_ATTEMPTS 5
+#define CONFIG_SYS_SGMII_REFCLK_MHZ 312
+#define CONFIG_SYS_SGMII_LINERATE_MHZ 1250
+#define CONFIG_SYS_SGMII_RATESCALE 2
+
+/* AEMIF */
+#define CONFIG_TI_AEMIF
+#define CONFIG_AEMIF_CNTRL_BASE KS2_AEMIF_CNTRL_BASE
+
+/* I2C Configuration */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_DAVINCI
+#define CONFIG_SYS_DAVINCI_I2C_SPEED 100000
+#define CONFIG_SYS_DAVINCI_I2C_SLAVE 0x10 /* SMBus host address */
+#define CONFIG_SYS_DAVINCI_I2C_SPEED1 100000
+#define CONFIG_SYS_DAVINCI_I2C_SLAVE1 0x10 /* SMBus host address */
+#define CONFIG_SYS_DAVINCI_I2C_SPEED2 100000
+#define CONFIG_SYS_DAVINCI_I2C_SLAVE2 0x10 /* SMBus host address */
+#define I2C_BUS_MAX 3
+
+/* EEPROM definitions */
+#define CONFIG_SYS_I2C_MULTI_EEPROMS
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20
+#define CONFIG_ENV_EEPROM_IS_ON_I2C
+
+/* NAND Configuration */
+#define CONFIG_NAND_DAVINCI
+#define CONFIG_KEYSTONE_RBL_NAND
+#define CONFIG_KEYSTONE_NAND_MAX_RBL_SIZE CONFIG_ENV_OFFSET
+#define CONFIG_SYS_NAND_MASK_CLE 0x4000
+#define CONFIG_SYS_NAND_MASK_ALE 0x2000
+#define CONFIG_SYS_NAND_CS 2
+#define CONFIG_SYS_NAND_USE_FLASH_BBT
+#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
+
+#define CONFIG_SYS_NAND_LARGEPAGE
+#define CONFIG_SYS_NAND_BASE_LIST { 0x30000000, }
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_SYS_NAND_MAX_CHIPS 1
+#define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE
+#define CONFIG_ENV_SIZE (256 << 10) /* 256 KiB */
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_OFFSET 0x100000
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_MTD_DEVICE
+#define CONFIG_RBTREE
+#define CONFIG_LZO
+#define MTDIDS_DEFAULT "nand0=davinci_nand.0"
+#define MTDPARTS_DEFAULT "mtdparts=davinci_nand.0:" \
+ "1024k(bootloader)ro,512k(params)ro," \
+ "-(ubifs)"
+
+/* U-Boot command configuration */
+#include <config_cmd_default.h>
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SAVES
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_UBI
+#define CONFIG_CMD_UBIFS
+#define CONFIG_CMD_SF
+#define CONFIG_CMD_EEPROM
+
+/* U-Boot general configuration */
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_SYS_CBSIZE 1024
+#define CONFIG_SYS_PBSIZE 2048
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CRC32_VERIFY
+#define CONFIG_MX_CYCLIC
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_VERSION_VARIABLE
+#define CONFIG_TIMESTAMP
+
+/* EDMA3 */
+#define CONFIG_TI_EDMA3
+
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_BOOTFILE "uImage"
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "boot=ramfs\0" \
+ "tftp_root=/\0" \
+ "nfs_root=/export\0" \
+ "mem_lpae=1\0" \
+ "mem_reserve=512M\0" \
+ "addr_fdt=0x87000000\0" \
+ "addr_kern=0x88000000\0" \
+ KS2_ADDR_MON \
+ "addr_uboot=0x87000000\0" \
+ "addr_fs=0x82000000\0" \
+ "addr_ubi=0x82000000\0" \
+ "addr_secdb_key=0xc000000\0" \
+ "fdt_high=0xffffffff\0" \
+ KS2_FDT_NAME \
+ "name_fs=arago-console-image.cpio.gz\0" \
+ "name_kern=uImage\0" \
+ KS2_NAME_MON \
+ NAME_UBOOT \
+ NAME_UBI \
+ "run_mon=mon_install ${addr_mon}\0" \
+ "run_kern=bootm ${addr_kern} - ${addr_fdt}\0" \
+ "init_net=run args_all args_net\0" \
+ "init_ubi=run args_all args_ubi; " \
+ "ubi part ubifs; ubifsmount boot;" \
+ "ubifsload ${addr_secdb_key} securedb.key.bin;\0" \
+ "get_fdt_net=dhcp ${addr_fdt} ${tftp_root}/${name_fdt}\0" \
+ "get_fdt_ubi=ubifsload ${addr_fdt} ${name_fdt}\0" \
+ "get_kern_net=dhcp ${addr_kern} ${tftp_root}/${name_kern}\0" \
+ "get_kern_ubi=ubifsload ${addr_kern} ${name_kern}\0" \
+ "get_mon_net=dhcp ${addr_mon} ${tftp_root}/${name_mon}\0" \
+ "get_mon_ubi=ubifsload ${addr_mon} ${name_mon}\0" \
+ "get_uboot_net=dhcp ${addr_uboot} ${tftp_root}/${name_uboot}\0" \
+ "burn_uboot_spi=sf probe; sf erase 0 0x100000; " \
+ "sf write ${addr_uboot} 0 ${filesize}\0" \
+ "burn_uboot_nand=nand erase 0 0x100000; " \
+ "nand write ${addr_uboot} 0 ${filesize}\0" \
+ "args_all=setenv bootargs console=ttyS0,115200n8 rootwait=1\0" \
+ KS2_ARGS_UBI \
+ "args_net=setenv bootargs ${bootargs} rootfstype=nfs " \
+ "root=/dev/nfs rw nfsroot=${serverip}:${nfs_root}," \
+ "${nfs_options} ip=dhcp\0" \
+ "nfs_options=v3,tcp,rsize=4096,wsize=4096\0" \
+ "get_fdt_ramfs=dhcp ${addr_fdt} ${tftp_root}/${name_fdt}\0" \
+ "get_kern_ramfs=dhcp ${addr_kern} ${tftp_root}/${name_kern}\0" \
+ "get_mon_ramfs=dhcp ${addr_mon} ${tftp_root}/${name_mon}\0" \
+ "get_fs_ramfs=dhcp ${addr_fs} ${tftp_root}/${name_fs}\0" \
+ "get_ubi_net=dhcp ${addr_ubi} ${tftp_root}/${name_ubi}\0" \
+ "burn_ubi=nand erase.part ubifs; " \
+ "nand write ${addr_ubi} ubifs ${filesize}\0" \
+ "init_ramfs=run args_all args_ramfs get_fs_ramfs\0" \
+ "args_ramfs=setenv bootargs ${bootargs} " \
+ "rdinit=/sbin/init rw root=/dev/ram0 " \
+ "initrd=0x802000000,9M\0" \
+ "no_post=1\0" \
+ "mtdparts=mtdparts=davinci_nand.0:" \
+ "1024k(bootloader)ro,512k(params)ro,-(ubifs)\0"
+
+#define CONFIG_BOOTCOMMAND \
+ "run init_${boot} get_fdt_${boot} get_mon_${boot} " \
+ "get_kern_${boot} run_mon run_kern"
+
+#define CONFIG_BOOTARGS \
+
+/* Linux interfacing */
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_BOARD_SETUP
+#define CONFIG_SYS_BARGSIZE 1024
+#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x08000000)
+#define CONFIG_LINUX_BOOT_PARAM_ADDR (CONFIG_SYS_SDRAM_BASE + 0x100)
+
+#define CONFIG_SUPPORT_RAW_INITRD
+
+/* we may include files below only after all above definitions */
+#include <asm/arch/hardware.h>
+#include <asm/arch/clock.h>
+#define CONFIG_SYS_HZ_CLOCK clk_get_rate(KS2_CLK1_6)
+
+/* Maximum memory size for relocated U-boot at the end of the DDR3 memory
+ which is NOT applicable for DDR ECC test */
+#define CONFIG_MAX_UBOOT_MEM_SIZE (4 << 20) /* 4 MiB */
+
+#endif /* __CONFIG_KS2_EVM_H */
diff --git a/include/configs/mcx.h b/include/configs/mcx.h
index 47244c0..75abb60 100644
--- a/include/configs/mcx.h
+++ b/include/configs/mcx.h
@@ -316,10 +316,6 @@
*/
/* **** PISMO SUPPORT *** */
-
-/* Configure the PISMO */
-#define PISMO1_NAND_SIZE GPMC_SIZE_128M
-
#define CONFIG_NAND_OMAP_GPMC
#define CONFIG_ENV_IS_IN_NAND
#define SMNAND_ENV_OFFSET 0x180000 /* environment starts here */
diff --git a/include/configs/nokia_rx51.h b/include/configs/nokia_rx51.h
index e0c0fac..43c1617 100644
--- a/include/configs/nokia_rx51.h
+++ b/include/configs/nokia_rx51.h
@@ -220,8 +220,6 @@
#ifdef ONENAND_SUPPORT
-#define PISMO1_NAND_SIZE GPMC_SIZE_128M
-#define PISMO1_ONEN_SIZE GPMC_SIZE_128M
#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP
#define CONFIG_MTD_DEVICE
#define CONFIG_MTD_PARTITIONS
@@ -263,9 +261,10 @@
#define VIDEO_TSTC_FCT rx51_kp_tstc
#define VIDEO_GETC_FCT rx51_kp_getc
#ifndef __ASSEMBLY__
+struct stdio_dev;
int rx51_kp_init(void);
-int rx51_kp_tstc(void);
-int rx51_kp_getc(void);
+int rx51_kp_tstc(struct stdio_dev *sdev);
+int rx51_kp_getc(struct stdio_dev *sdev);
#endif
#ifndef MTDPARTS_DEFAULT
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index 3782049..644e97f 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -195,7 +195,7 @@
"bootenv=uEnv.txt\0" \
"loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
"importbootenv=echo Importing environment from mmc ...; " \
- "env import -t $loadaddr $filesize\0" \
+ "env import -t -r $loadaddr $filesize\0" \
"ramargs=setenv bootargs console=${console} " \
"${optargs} " \
"mpurate=${mpurate} " \
@@ -266,13 +266,8 @@
*/
/* **** PISMO SUPPORT *** */
-
-/* Configure the PISMO */
-#define PISMO1_NAND_SIZE GPMC_SIZE_128M
-#define PISMO1_ONEN_SIZE GPMC_SIZE_128M
-
#if defined(CONFIG_CMD_NAND)
-#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE
+#define CONFIG_SYS_FLASH_BASE NAND_BASE
#endif
/* Monitor at start of flash */
@@ -309,5 +304,11 @@
#define CONFIG_SYS_NAND_ECCBYTES 3
#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
+/* NAND: SPL falcon mode configs */
+#ifdef CONFIG_SPL_OS_BOOT
+#define CONFIG_CMD_SPL_NAND_OFS 0x240000
+#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000
+#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000
+#endif
#endif /* __CONFIG_H */
diff --git a/include/configs/omap3_evm_common.h b/include/configs/omap3_evm_common.h
index ae4ce63..739d392 100644
--- a/include/configs/omap3_evm_common.h
+++ b/include/configs/omap3_evm_common.h
@@ -95,9 +95,6 @@
/*
* PISMO support
*/
-#define PISMO1_NAND_SIZE GPMC_SIZE_128M
-#define PISMO1_ONEN_SIZE GPMC_SIZE_128M
-
/* Monitor at start of flash - Reserve 2 sectors */
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
@@ -205,12 +202,12 @@
* NAND / OneNAND
*/
#if defined(CONFIG_CMD_NAND)
-#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE
+#define CONFIG_SYS_FLASH_BASE NAND_BASE
#define CONFIG_NAND_OMAP_GPMC
#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET
#elif defined(CONFIG_CMD_ONENAND)
-#define CONFIG_SYS_FLASH_BASE PISMO1_ONEN_BASE
+#define CONFIG_SYS_FLASH_BASE ONENAND_MAP
#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP
#endif
diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h
index 79daabd..006c9a9 100644
--- a/include/configs/omap3_igep00x0.h
+++ b/include/configs/omap3_igep00x0.h
@@ -146,8 +146,6 @@
*/
#ifdef CONFIG_BOOT_ONENAND
-#define PISMO1_ONEN_SIZE GPMC_SIZE_128M /* Configure the PISMO */
-
#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP
#define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */
@@ -158,7 +156,6 @@
#endif
#ifdef CONFIG_NAND
-#define PISMO1_NAND_SIZE GPMC_SIZE_128M /* Configure the PISMO */
#define CONFIG_ENV_OFFSET 0x260000 /* environment starts here */
#define CONFIG_ENV_IS_IN_NAND 1
#define CONFIG_ENV_SIZE (512 << 10) /* Total Size Environment */
@@ -199,6 +196,13 @@
#define CONFIG_SYS_NAND_ECCSIZE 512
#define CONFIG_SYS_NAND_ECCBYTES 3
#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW
+#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
+/* NAND: SPL falcon mode configs */
+#ifdef CONFIG_SPL_OS_BOOT
+#define CONFIG_CMD_SPL_NAND_OFS 0x240000
+#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000
+#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000
+#endif
#endif
#endif /* __IGEP00X0_H */
diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h
index 8dcbba3..717c935 100644
--- a/include/configs/omap3_logic.h
+++ b/include/configs/omap3_logic.h
@@ -277,16 +277,12 @@
*/
/* **** PISMO SUPPORT *** */
-
-/* Configure the PISMO */
-#define PISMO1_NAND_SIZE GPMC_SIZE_128M
-
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */
#if defined(CONFIG_CMD_NAND)
-#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE
+#define CONFIG_SYS_FLASH_BASE NAND_BASE
#elif defined(CONFIG_CMD_ONENAND)
-#define CONFIG_SYS_FLASH_BASE PISMO1_ONEN_BASE
+#define CONFIG_SYS_FLASH_BASE ONENAND_MAP
#endif
/* Monitor at start of flash */
diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
index f7483a0..e66f306 100644
--- a/include/configs/omap3_overo.h
+++ b/include/configs/omap3_overo.h
@@ -173,12 +173,8 @@
0x01F00000) /* 31MB */
/* FLASH and environment organization */
-/* Configure the PISMO */
-#define PISMO1_NAND_SIZE GPMC_SIZE_128M
-#define PISMO1_ONEN_SIZE GPMC_SIZE_128M
-
#if defined(CONFIG_NAND)
-#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE
+#define CONFIG_SYS_FLASH_BASE NAND_BASE
#endif
/* Monitor at start of flash */
@@ -220,5 +216,11 @@
#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
+/* NAND: SPL falcon mode configs */
+#ifdef CONFIG_SPL_OS_BOOT
+#define CONFIG_CMD_SPL_NAND_OFS 0x240000
+#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000
+#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000
+#endif
#endif /* __CONFIG_H */
diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h
index da67787..c22c1fc 100644
--- a/include/configs/omap3_pandora.h
+++ b/include/configs/omap3_pandora.h
@@ -220,15 +220,10 @@
*/
/* **** PISMO SUPPORT *** */
-
-/* Configure the PISMO */
-#define PISMO1_NAND_SIZE GPMC_SIZE_128M
-#define PISMO1_ONEN_SIZE GPMC_SIZE_128M
-
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */
#if defined(CONFIG_CMD_NAND)
-#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE
+#define CONFIG_SYS_FLASH_BASE NAND_BASE
#endif
/* Monitor at start of flash */
diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h
index 3efe4cf..93f4d62 100644
--- a/include/configs/omap3_zoom1.h
+++ b/include/configs/omap3_zoom1.h
@@ -70,6 +70,12 @@
"4m(kernel),-(fs)"
#if defined(CONFIG_CMD_NAND)
+/* NAND: SPL falcon mode configs */
+#ifdef CONFIG_SPL_OS_BOOT
+#define CONFIG_CMD_SPL_NAND_OFS 0x240000
+#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000
+#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000
+#endif
#define CONFIG_CMD_NAND_LOCK_UNLOCK /* Enable lock/unlock support */
#endif
@@ -165,13 +171,8 @@
*/
/* **** PISMO SUPPORT *** */
-
-/* Configure the PISMO */
-#define PISMO1_NAND_SIZE GPMC_SIZE_128M
-#define PISMO1_ONEN_SIZE GPMC_SIZE_128M
-
#if defined(CONFIG_CMD_NAND)
-#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE
+#define CONFIG_SYS_FLASH_BASE NAND_BASE
#endif
/* Monitor at start of flash */
diff --git a/include/configs/pengwyn.h b/include/configs/pengwyn.h
index 8510405..4684ad6 100644
--- a/include/configs/pengwyn.h
+++ b/include/configs/pengwyn.h
@@ -159,6 +159,12 @@
#define CONFIG_ENV_IS_IN_NAND
#define CONFIG_ENV_OFFSET 0x260000 /* environment starts here */
#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */
+/* NAND: SPL falcon mode configs */
+#ifdef CONFIG_SPL_OS_BOOT
+#define CONFIG_CMD_SPL_NAND_OFS 0x240000 /* un-assigned */
+#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000
+#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000
+#endif
/*
* USB configuration. We enable MUSB support, both for host and for
diff --git a/include/configs/rpi_b.h b/include/configs/rpi_b.h
index ff48598..60f2489 100644
--- a/include/configs/rpi_b.h
+++ b/include/configs/rpi_b.h
@@ -98,7 +98,7 @@
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
#define CONFIG_PREBOOT \
"if load mmc 0:1 ${loadaddr} /uEnv.txt; then " \
- "env import -t ${loadaddr} ${filesize}; " \
+ "env import -t -r ${loadaddr} ${filesize}; " \
"fi"
#define ENV_DEVICE_SETTINGS \
diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h
index 12b69d9..bf2d25c 100644
--- a/include/configs/sandbox.h
+++ b/include/configs/sandbox.h
@@ -68,8 +68,10 @@
#define CONFIG_EFI_PARTITION
/*
- * Size of malloc() pool, although we don't actually use this yet.
+ * Size of malloc() pool, before and after relocation
*/
+#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
+#define CONFIG_MALLOC_F_ADDR 0x0010000
#define CONFIG_SYS_MALLOC_LEN (32 << 20) /* 32MB */
#define CONFIG_SYS_HUSH_PARSER
diff --git a/include/configs/sun4i.h b/include/configs/sun4i.h
new file mode 100644
index 0000000..037f995
--- /dev/null
+++ b/include/configs/sun4i.h
@@ -0,0 +1,24 @@
+/*
+ * (C) Copyright 2012-2013 Henrik Nordstrom <henrik@henriknordstrom.net>
+ *
+ * Configuration settings for the Allwinner A10 (sun4i) CPU
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * A10 specific configuration
+ */
+#define CONFIG_SUN4I /* sun4i SoC generation */
+#define CONFIG_CLK_FULL_SPEED 1008000000
+
+#define CONFIG_SYS_PROMPT "sun4i# "
+
+/*
+ * Include common sunxi configuration where most the settings are
+ */
+#include <configs/sunxi-common.h>
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/sun5i.h b/include/configs/sun5i.h
new file mode 100644
index 0000000..c6138b7
--- /dev/null
+++ b/include/configs/sun5i.h
@@ -0,0 +1,24 @@
+/*
+ * (C) Copyright 2012-2013 Henrik Nordstrom <henrik@henriknordstrom.net>
+ *
+ * Configuration settings for the Allwinner A13 (sun5i) CPU
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_SUN5I /* sun5i SoC generation */
+#define CONFIG_CLK_FULL_SPEED 1008000000
+
+#define CONFIG_SYS_PROMPT "sun5i# "
+
+/*
+ * Include common sunxi configuration where most the settings are
+ */
+#include <configs/sunxi-common.h>
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/sun7i.h b/include/configs/sun7i.h
index 9b693f7..d9be104 100644
--- a/include/configs/sun7i.h
+++ b/include/configs/sun7i.h
@@ -13,6 +13,7 @@
* A20 specific configuration
*/
#define CONFIG_SUN7I /* sun7i SoC generation */
+#define CONFIG_CLK_FULL_SPEED 912000000
#define CONFIG_SYS_PROMPT "sun7i# "
diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
index 5d72d62..845b004 100644
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -70,7 +70,6 @@
#define CONFIG_CMD_MMC
#define CONFIG_MMC_SUNXI
#define CONFIG_MMC_SUNXI_SLOT 0
-#define CONFIG_MMC_SUNXI_USE_DMA
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_SYS_MMC_ENV_DEV 0 /* first detected MMC controller */
@@ -162,7 +161,31 @@
#undef CONFIG_CMD_NET
#undef CONFIG_CMD_NFS
+/* I2C */
+#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MVTWSI
+#define CONFIG_SYS_I2C_SPEED 400000
+#define CONFIG_SYS_I2C_SLAVE 0x7f
+#define CONFIG_CMD_I2C
+
+/* PMU */
+#if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || defined CONFIG_AXP221_POWER
+#define CONFIG_SPL_POWER_SUPPORT
+#endif
+
+#ifndef CONFIG_CONS_INDEX
#define CONFIG_CONS_INDEX 1 /* UART0 */
+#endif
+
+/* GPIO */
+#define CONFIG_SUNXI_GPIO
+#define CONFIG_CMD_GPIO
+
+/* Ethernet support */
+#ifdef CONFIG_SUNXI_EMAC
+#define CONFIG_MII /* MII PHY management */
+#endif
#ifdef CONFIG_SUNXI_GMAC
#define CONFIG_DESIGNWARE_ETH /* GMAC can use designware driver */
@@ -188,6 +211,8 @@
#define CONFIG_ENV_IS_NOWHERE
#endif
+#define CONFIG_MISC_INIT_R
+
#ifndef CONFIG_SPL_BUILD
#include <config_distro_defaults.h>
#endif
diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h
index 0c2f0f1..aa0ea16 100644
--- a/include/configs/tam3517-common.h
+++ b/include/configs/tam3517-common.h
@@ -181,10 +181,6 @@
*/
/* **** PISMO SUPPORT *** */
-
-/* Configure the PISMO */
-#define PISMO1_NAND_SIZE GPMC_SIZE_128M
-
#define CONFIG_NAND
#define CONFIG_NAND_OMAP_GPMC
#define CONFIG_ENV_IS_IN_NAND
diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h
index 1b0fee9..9fc31be 100644
--- a/include/configs/tao3530.h
+++ b/include/configs/tao3530.h
@@ -22,6 +22,7 @@
#define CONFIG_OMAP_GPIO
#define CONFIG_OMAP_COMMON
+#define CONFIG_SYS_GENERIC_BOARD
#define MACH_TYPE_OMAP3_TAO3530 2836
@@ -253,13 +254,8 @@
*/
/* **** PISMO SUPPORT *** */
-
-/* Configure the PISMO */
-#define PISMO1_NAND_SIZE GPMC_SIZE_128M
-#define PISMO1_ONEN_SIZE GPMC_SIZE_128M
-
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */
-#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE
+#define CONFIG_SYS_FLASH_BASE NAND_BASE
/* Monitor at start of flash */
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h
index 6e0bf09..85c027c 100644
--- a/include/configs/ti_armv7_common.h
+++ b/include/configs/ti_armv7_common.h
@@ -243,13 +243,6 @@
#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x80 /* address 0x10000 */
#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0x80 /* 64KiB */
-/* NAND */
-#ifdef CONFIG_NAND
-#define CONFIG_CMD_SPL_NAND_OFS 0x240000 /* end of u-boot */
-#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000
-#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000
-#endif
-
/* spl export command */
#define CONFIG_CMD_SPL
#endif
@@ -275,7 +268,6 @@
#define CONFIG_SPL_NAND_ECC
#define CONFIG_SPL_MTD_SUPPORT
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
#endif
#endif /* !CONFIG_NOR_BOOT */
diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h
index 80985a2..6c2f653 100644
--- a/include/configs/tricorder.h
+++ b/include/configs/tricorder.h
@@ -35,6 +35,8 @@
#include <asm/arch/cpu.h> /* get chip and board defs */
#include <asm/arch/omap3.h>
+#define CONFIG_SYS_GENERIC_BOARD
+
/* Display CPU and Board information */
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
@@ -315,8 +317,6 @@
#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1
/* NAND and environment organization */
-#define PISMO1_NAND_SIZE GPMC_SIZE_128M
-
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index fa252c0..690cacb 100644
--- a/include/configs/zynq-common.h
+++ b/include/configs/zynq-common.h
@@ -339,4 +339,6 @@
#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_GENERIC_BOARD
+
#endif /* __CONFIG_ZYNQ_COMMON_H */