summaryrefslogtreecommitdiff
path: root/include/configs
diff options
context:
space:
mode:
authorWolfgang Denk <wd@denx.de>2012-07-10 08:54:41 +0200
committerWolfgang Denk <wd@denx.de>2012-07-10 08:54:41 +0200
commit895f3e0542015b347298c8b501e63d5f32002c04 (patch)
tree4df04c7f3480d75bd02925d09aa1cbb5049a3fc9 /include/configs
parent30704dae469c092766c346b3bef7ac001fa45511 (diff)
parent63905f1616fc2f827e986d8e82a5a2b69f4a0e6a (diff)
downloadu-boot-imx-895f3e0542015b347298c8b501e63d5f32002c04.zip
u-boot-imx-895f3e0542015b347298c8b501e63d5f32002c04.tar.gz
u-boot-imx-895f3e0542015b347298c8b501e63d5f32002c04.tar.bz2
Merge branch 'master' of git://git.denx.de/u-boot-arm
* 'master' of git://git.denx.de/u-boot-arm: tegra: define fdt_load/fdt_high variables tegra: enable bootz command tegra: usb: Fix device enumeration problem of USB1 tegra: trimslice: set up serial flash pinmux tegra: add pin_mux_spi() board initialization function tegra: add GMC/GMD funcmux entry for SFLASH tegra: bootcmd: start USB only when needed tegra: bootcmd enhancements tegra: add enterrcm command tegra: enable CONFIG_ENV_VARS_UBOOT_CONFIG Add env vars describing U-Boot target board tegra: usb: fix wrong error check tegra: add ULPI on USB2 funcmux entry tegra: fix leftover CONFIG_TEGRA2_MMC & _SPI build switches tegra: Add Tamonten Evaluation Carrier support tegra: Use SD write-protect GPIO on Tamonten tegra: Implement gpio_early_init() on Tamonten tegra: Allow boards to perform early GPIO setup tegra: plutux: Add device tree support tegra: medcom: Add device tree support tegra: Rework Tamonten support beagle: add eeprom expansion board info for bct brettl4 Signed-off-by: Wolfgang Denk <wd@denx.de>
Diffstat (limited to 'include/configs')
-rw-r--r--include/configs/medcom.h21
-rw-r--r--include/configs/plutux.h21
-rw-r--r--include/configs/tec.h82
-rw-r--r--include/configs/tegra2-common-post.h96
-rw-r--r--include/configs/tegra2-common.h3
5 files changed, 189 insertions, 34 deletions
diff --git a/include/configs/medcom.h b/include/configs/medcom.h
index bdea7c9..c84db03 100644
--- a/include/configs/medcom.h
+++ b/include/configs/medcom.h
@@ -1,7 +1,7 @@
/*
* (C) Copyright 2010,2011
* NVIDIA Corporation <www.nvidia.com>
- * (C) Copyright 2011
+ * (C) Copyright 2011-2012
* Avionic Design GmbH <www.avionic-design.de>
*
* See file CREDITS for list of people who contributed to this
@@ -28,6 +28,11 @@
#include "tegra2-common.h"
+/* Enable fdt support for Medcom. Flash the image in u-boot-dtb.bin */
+#define CONFIG_DEFAULT_DEVICE_TREE tegra2-medcom
+#define CONFIG_OF_CONTROL
+#define CONFIG_OF_SEPARATE
+
/* High-level configuration options */
#define V_PROMPT "Tegra2 (Medcom) # "
#define CONFIG_TEGRA2_BOARD_STRING "Avionic Design Medcom"
@@ -47,6 +52,20 @@
#define CONFIG_TEGRA_MMC
#define CONFIG_CMD_MMC
+/* USB host support */
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_TEGRA
+#define CONFIG_USB_STORAGE
+#define CONFIG_CMD_USB
+
+/* USB networking support */
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_SMSC95XX
+
+/* General networking support */
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_DHCP
+
#define CONFIG_DOS_PARTITION
#define CONFIG_EFI_PARTITION
#define CONFIG_CMD_EXT2
diff --git a/include/configs/plutux.h b/include/configs/plutux.h
index 6397eb1..9870590 100644
--- a/include/configs/plutux.h
+++ b/include/configs/plutux.h
@@ -1,7 +1,7 @@
/*
* (C) Copyright 2010,2011
* NVIDIA Corporation <www.nvidia.com>
- * (C) Copyright 2011
+ * (C) Copyright 2011-2012
* Avionic Design GmbH <www.avionic-design.de>
*
* See file CREDITS for list of people who contributed to this
@@ -28,6 +28,11 @@
#include "tegra2-common.h"
+/* Enable fdt support for Plutux. Flash the image in u-boot-dtb.bin */
+#define CONFIG_DEFAULT_DEVICE_TREE tegra2-plutux
+#define CONFIG_OF_CONTROL
+#define CONFIG_OF_SEPARATE
+
/* High-level configuration options */
#define V_PROMPT "Tegra2 (Plutux) # "
#define CONFIG_TEGRA2_BOARD_STRING "Avionic Design Plutux"
@@ -47,6 +52,20 @@
#define CONFIG_TEGRA_MMC
#define CONFIG_CMD_MMC
+/* USB host support */
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_TEGRA
+#define CONFIG_USB_STORAGE
+#define CONFIG_CMD_USB
+
+/* USB networking support */
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_SMSC95XX
+
+/* General networking support */
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_DHCP
+
#define CONFIG_DOS_PARTITION
#define CONFIG_EFI_PARTITION
#define CONFIG_CMD_EXT2
diff --git a/include/configs/tec.h b/include/configs/tec.h
new file mode 100644
index 0000000..3d0a788
--- /dev/null
+++ b/include/configs/tec.h
@@ -0,0 +1,82 @@
+/*
+ * (C) Copyright 2010,2011
+ * NVIDIA Corporation <www.nvidia.com>
+ * (C) Copyright 2011-2012
+ * Avionic Design GmbH <www.avionic-design.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include "tegra2-common.h"
+
+/* Enable fdt support for TEC. Flash the image in u-boot-dtb.bin */
+#define CONFIG_DEFAULT_DEVICE_TREE tegra2-tec
+#define CONFIG_OF_CONTROL
+#define CONFIG_OF_SEPARATE
+
+/* High-level configuration options */
+#define V_PROMPT "Tegra2 (TEC) # "
+#define CONFIG_TEGRA2_BOARD_STRING "Avionic Design Tamonten Evaluation Carrier"
+#define CONFIG_SYS_BOARD_ODMDATA 0x2b0d8011
+
+/* Board-specific serial config */
+#define CONFIG_SERIAL_MULTI
+#define CONFIG_TEGRA2_ENABLE_UARTD /* UARTD: debug UART */
+#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE
+
+#define CONFIG_BOARD_EARLY_INIT_F
+
+#define CONFIG_ENV_IS_NOWHERE
+
+/* SD/MMC */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_TEGRA_MMC
+#define CONFIG_CMD_MMC
+
+/* USB host support */
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_TEGRA
+#define CONFIG_USB_STORAGE
+#define CONFIG_CMD_USB
+
+/* USB networking support */
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_SMSC95XX
+
+/* General networking support */
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_DHCP
+
+#define CONFIG_DOS_PARTITION
+#define CONFIG_EFI_PARTITION
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+
+#define CONFIG_FIT
+
+#define CONFIG_BOOTCOMMAND \
+ "mmc rescan;" \
+ "ext2load mmc 0 0x17000000 /boot/uImage;" \
+ "bootm"
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/tegra2-common-post.h b/include/configs/tegra2-common-post.h
index 0484a52..c21fc28 100644
--- a/include/configs/tegra2-common-post.h
+++ b/include/configs/tegra2-common-post.h
@@ -31,15 +31,15 @@
#else
#ifdef CONFIG_CMD_EXT2
-#define BOOTCMD_FS_EXT2 "ext2 "
+#define BOOT_FSTYPE_EXT2 "ext2 "
#else
-#define BOOTCMD_FS_EXT2 ""
+#define BOOT_FSTYPE_EXT2 ""
#endif
#ifdef CONFIG_CMD_FAT
-#define BOOTCMD_FS_FAT "fat"
+#define BOOT_FSTYPE_FAT "fat"
#else
-#define BOOTCMD_FS_FAT ""
+#define BOOT_FSTYPE_FAT ""
#endif
#ifdef CONFIG_CMD_MMC
@@ -47,71 +47,103 @@
"mmc_boot=" \
"setenv devtype mmc; " \
"if mmc dev ${devnum}; then " \
- "run script_boot; " \
+ "run scan_boot; " \
"fi\0" \
- "mmc0_boot=setenv devnum 0; run mmc_boot;\0" \
- "mmc1_boot=setenv devnum 1; run mmc_boot;\0" \
- "bootcmd_mmc=run mmc1_boot; run mmc0_boot\0"
-#define BOOTCMD_MMC "run bootcmd_mmc; "
+ "bootcmd_mmc0=setenv devnum 0; run mmc_boot;\0" \
+ "bootcmd_mmc1=setenv devnum 1; run mmc_boot;\0"
+#define BOOT_TARGETS_MMC "mmc1 mmc0"
#else
#define BOOTCMDS_MMC ""
-#define BOOTCMD_MMC ""
+#define BOOT_TARGETS_MMC ""
#endif
#ifdef CONFIG_CMD_USB
+#define BOOTCMD_INIT_USB "run usb_init; "
#define BOOTCMDS_USB \
+ "usb_init=" \
+ "if ${usb_need_init}; then " \
+ "set usb_need_init false; " \
+ "usb start 0; " \
+ "fi\0" \
+ \
"usb_boot=" \
"setenv devtype usb; " \
+ BOOTCMD_INIT_USB \
"if usb dev ${devnum}; then " \
- "run script_boot; " \
+ "run scan_boot; " \
"fi\0" \
- "usb0_boot=setenv devnum 0; run usb_boot;\0" \
- "bootcmd_usb=run usb0_boot\0"
-#define BOOTCMD_USB "run bootcmd_usb; "
-#define BOOTCMD_INIT_USB "usb start 0; "
+ \
+ "bootcmd_usb0=setenv devnum 0; run usb_boot;\0"
+#define BOOT_TARGETS_USB "usb0"
#else
-#define BOOTCMDS_USB ""
-#define BOOTCMD_USB ""
#define BOOTCMD_INIT_USB ""
+#define BOOTCMDS_USB ""
+#define BOOT_TARGETS_USB ""
#endif
#ifdef CONFIG_CMD_DHCP
#define BOOTCMDS_DHCP \
"bootcmd_dhcp=" \
+ BOOTCMD_INIT_USB \
"if dhcp ${scriptaddr} boot.scr.uimg; then "\
"source ${scriptaddr}; " \
"fi\0"
-#define BOOTCMD_DHCP "run bootcmd_dhcp; "
+#define BOOT_TARGETS_DHCP "dhcp"
#else
#define BOOTCMDS_DHCP ""
-#define BOOTCMD_DHCP ""
+#define BOOT_TARGETS_DHCP ""
#endif
#define BOOTCMDS_COMMON \
"scriptaddr=0x400000\0" \
+ \
"rootpart=1\0" \
- "script_boot=" \
- "for fs in " BOOTCMD_FS_EXT2 BOOTCMD_FS_FAT "; do " \
- "for prefix in / /boot/; do " \
- "for script in boot.scr.uimg boot.scr; do " \
- "echo Scanning ${devtype} ${devnum}:${rootpart} ${fs} ${prefix}${script} ...; " \
- "if ${fs}load ${devtype} ${devnum}:${rootpart} ${scriptaddr} ${prefix}${script}; then " \
- "echo ${script} found! Executing ...;" \
- "source ${scriptaddr};" \
- "fi; " \
- "done; " \
- "done; " \
- "done;\0" \
+ \
+ "script_boot=" \
+ "if ${fs}load ${devtype} ${devnum}:${rootpart} " \
+ "${scriptaddr} ${prefix}${script}; then " \
+ "echo ${script} found! Executing ...;" \
+ "source ${scriptaddr};" \
+ "fi;\0" \
+ \
+ "scan_boot=" \
+ "echo Scanning ${devtype} ${devnum}...; " \
+ "for fs in ${boot_fstypes}; do " \
+ "for prefix in ${boot_prefixes}; do " \
+ "for script in ${boot_scripts}; do " \
+ "run script_boot; " \
+ "done; " \
+ "done; " \
+ "done;\0" \
+ \
+ "boot_targets=" \
+ BOOT_TARGETS_MMC " " \
+ BOOT_TARGETS_USB " " \
+ BOOT_TARGETS_DHCP " " \
+ "\0" \
+ \
+ "boot_fstypes=" \
+ BOOT_FSTYPE_EXT2 " " \
+ BOOT_FSTYPE_FAT " " \
+ "\0" \
+ \
+ "boot_prefixes=/ /boot/\0" \
+ \
+ "boot_scripts=boot.scr.uimg boot.scr\0" \
+ \
BOOTCMDS_MMC \
BOOTCMDS_USB \
BOOTCMDS_DHCP
-#define CONFIG_BOOTCOMMAND BOOTCMD_INIT_USB BOOTCMD_USB BOOTCMD_MMC BOOTCMD_DHCP
+#define CONFIG_BOOTCOMMAND \
+ "for target in ${boot_targets}; do run bootcmd_${target}; done"
#endif
#define CONFIG_EXTRA_ENV_SETTINGS \
TEGRA2_DEVICE_SETTINGS \
+ "fdt_load=0x01000000\0" \
+ "fdt_high=01100000\0" \
BOOTCMDS_COMMON
#endif /* __TEGRA2_COMMON_POST_H */
diff --git a/include/configs/tegra2-common.h b/include/configs/tegra2-common.h
index 94e1aa6..6807762 100644
--- a/include/configs/tegra2-common.h
+++ b/include/configs/tegra2-common.h
@@ -68,6 +68,7 @@
#endif
/* Environment */
+#define CONFIG_ENV_VARS_UBOOT_CONFIG
#define CONFIG_ENV_SIZE 0x2000 /* Total Size Environment */
/*
@@ -192,4 +193,6 @@
#define CONFIG_TEGRA_GPIO
#define CONFIG_CMD_GPIO
+#define CONFIG_CMD_ENTERRCM
+#define CONFIG_CMD_BOOTZ
#endif /* __TEGRA2_COMMON_H */