Merge branch 'master' of http://www.denx.de/git/u-boot

11 files changed, 1483 insertions, 21 deletions

diff --git a/include/configs/M5271EVB.h b/include/configs/M5271EVB.h
index 3935f56..f0fc013 100644
--- a/include/configs/M5271EVB.h
+++ b/include/configs/M5271EVB.h
@@ -50,6 +50,8 @@
 
 #undef CONFIG_WATCHDOG		/* disable watchdog */
 
+#define CONFIG_BOOTDELAY	5
+
 /* Configuration for environment
  * Environment is embedded in u-boot in the second sector of the flash
  */
diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h
index 0300b0d..66f1646 100644
--- a/include/configs/MPC8349EMDS.h
+++ b/include/configs/MPC8349EMDS.h
@@ -39,7 +39,7 @@
 #define CONFIG_MPC8349		1	/* MPC8349 specific */
 #define CONFIG_MPC8349EMDS	1	/* MPC8349EMDS board specific */
 
-#undef CONFIG_PCI		
+#undef CONFIG_PCI
 #undef CONFIG_MPC83XX_PCI2 		/* support for 2nd PCI controller */
 
 #define PCI_66M
diff --git a/include/configs/ixdp425.h b/include/configs/ixdp425.h
index b0a80a3..9f9fdb2 100644
--- a/include/configs/ixdp425.h
+++ b/include/configs/ixdp425.h
@@ -33,6 +33,9 @@
 #define CONFIG_IXP425           1       /* This is an IXP425 CPU    */
 #define CONFIG_IXDP425          1       /* on an IXDP425 Board      */
 
+#define CONFIG_DISPLAY_CPUINFO	1	/* display cpu info (and speed)	*/
+#define CONFIG_DISPLAY_BOARDINFO 1	/* display board info		*/
+
 /***************************************************************
  * U-boot generic defines start here.
  ***************************************************************/
@@ -135,6 +138,8 @@
 #define CFG_DRAM_SIZE           0x01000000
 
 #define CFG_FLASH_BASE          PHYS_FLASH_1
+#define CFG_MONITOR_BASE	CFG_FLASH_BASE
+#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
 
 /*
  * Expansion bus settings
@@ -155,16 +160,27 @@
 /*
  * FLASH and environment organization
  */
+/*
+ * FLASH and environment organization
+ */
 #define CFG_MAX_FLASH_BANKS     1       /* max number of memory banks           */
-#define CFG_MAX_FLASH_SECT      128  	/* max number of sectors on one chip    */
+#define CFG_MAX_FLASH_SECT      128 	/* max number of sectors on one chip    */
+
+#define CFG_FLASH_CFI				/* The flash is CFI compatible	*/
+#define CFG_FLASH_CFI_DRIVER			/* Use common CFI driver	*/
+#define	CFG_ENV_IS_IN_FLASH	1
+
+#define CFG_FLASH_BANKS_LIST	{ PHYS_FLASH_1 }
+
+#define CFG_FLASH_CFI_WIDTH	FLASH_CFI_16BIT	/* no byte writes on IXP4xx	*/
+
+#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-/* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT    (25*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT    (25*CFG_HZ) /* Timeout for Flash Write */
+#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 
-/* FIXME */
-#define	CFG_ENV_IS_IN_FLASH		1
-#define CFG_ENV_ADDR            (PHYS_FLASH_1 + 0x20000)        /* Addr of Environment Sector   */
-#define CFG_ENV_SIZE            0x20000  /* Total Size of Environment Sector     */
+#define CFG_ENV_SECT_SIZE	0x20000 	/* size of one complete sector	*/
+#define CFG_ENV_ADDR		(PHYS_FLASH_1 + 0x20000)
+#define	CFG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
 
 #endif  /* __CONFIG_H */
diff --git a/include/configs/ixdpg425.h b/include/configs/ixdpg425.h
new file mode 100644
index 0000000..af4ecf6
--- /dev/null
+++ b/include/configs/ixdpg425.h
@@ -0,0 +1,240 @@
+/*
+ * (C) Copyright 2005-2006
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * (C) Copyright 2003
+ * Martijn de Gouw, Prodrive B.V., martijn.de.gouw@prodrive.nl
+ *
+ * Configuation settings for the IXDPG425 board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_IXP425           1       /* This is an IXP425 CPU	*/
+#define CONFIG_IXDPG425         1       /* on an IXDPG425 Board		*/
+
+#define CONFIG_DISPLAY_CPUINFO	1	/* display cpu info (and speed)	*/
+#define CONFIG_DISPLAY_BOARDINFO 1	/* display board info		*/
+
+/*
+ * Ethernet
+ */
+#define CONFIG_IXP4XX_NPE	1	/* include IXP4xx NPE support	*/
+#define CONFIG_NET_MULTI	1
+#define	CONFIG_PHY_ADDR		5	/* NPE0 PHY address		*/
+#define CONFIG_HAS_ETH1
+#define CONFIG_PHY1_ADDR	4	/* NPE1 PHY address		*/
+#define CONFIG_MII		1	/* MII PHY management		*/
+#define CFG_RX_ETH_BUFFER	16	/* Number of ethernet rx buffers & descriptors */
+
+/*
+ * Misc configuration options
+ */
+#undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff	*/
+#define CONFIG_USE_IRQ          1	/* we need IRQ stuff for timer	*/
+
+#define CONFIG_BOOTCOUNT_LIMIT		/* support for bootcount limit	*/
+#define CFG_BOOTCOUNT_ADDR	0x60003000 /* inside qmrg sram		*/
+
+#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs	*/
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG	1
+
+/*
+ * Size of malloc() pool
+ */
+#define CFG_MALLOC_LEN		(256 << 10)
+#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_BAUDRATE         115200
+#define CFG_IXP425_CONSOLE	IXP425_UART1   /* we use UART1 for console */
+
+#define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
+				CFG_CMD_DHCP	| \
+				CFG_CMD_ELF	| \
+				CFG_CMD_NET	| \
+				CFG_CMD_MII	| \
+				CFG_CMD_PING)
+
+/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+/* These are u-boot generic parameters */
+#include <cmd_confdefs.h>
+
+#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
+#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP                            /* undef to save memory         */
+#define CFG_PROMPT              "=> "   /* Monitor Command Prompt       */
+#define CFG_CBSIZE              256             /* Console I/O Buffer Size      */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS             16              /* max number of command args   */
+#define CFG_BARGSIZE            CFG_CBSIZE      /* Boot Argument Buffer Size    */
+
+#define CFG_MEMTEST_START       0x00400000      /* memtest works on     */
+#define CFG_MEMTEST_END         0x00800000      /* 4 ... 8 MB in DRAM   */
+#define CFG_LOAD_ADDR           0x00010000      /* default load address */
+
+#undef  CFG_CLKS_IN_HZ          /* everything, incl board info, in Hz */
+#define CFG_HZ			1000		/* decrementer freq: 1 ms ticks */
+
+						/* valid baudrates */
+#define CFG_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
+
+/*
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE        (128*1024)      /* regular stack */
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ    (4*1024)        /* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ    (4*1024)        /* FIQ stack */
+#endif
+
+/***************************************************************
+ * Platform/Board specific defines start here.
+ ***************************************************************/
+
+/*-----------------------------------------------------------------------
+ * Default configuration (environment varibles...)
+ *----------------------------------------------------------------------*/
+#define CONFIG_PREBOOT	"echo;"	\
+	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+	"echo"
+
+#undef	CONFIG_BOOTARGS
+
+#define	CONFIG_EXTRA_ENV_SETTINGS					\
+	"netdev=eth0\0"							\
+	"hostname=ixdpg425\0"						\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+		"nfsroot=${serverip}:${rootpath}\0"			\
+	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+	"addip=setenv bootargs ${bootargs} "				\
+		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
+		":${hostname}:${netdev}:off panic=1\0"			\
+	"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
+	"flash_nfs=run nfsargs addip addtty;"				\
+		"bootm ${kernel_addr}\0"				\
+	"flash_self=run ramargs addip addtty;"				\
+		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
+	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"     \
+	        "bootm\0"						\
+	"rootpath=/opt/eldk/arm\0"					\
+	"bootfile=/tftpboot/ixdpg425/uImage\0"				\
+	"kernel_addr=50080000\0"					\
+	"ramdisk_addr=50200000\0"					\
+	"load=tftp 100000 /tftpboot/ixdpg425/u-boot.bin\0"		\
+	"update=protect off 50000000 5003ffff;era 50000000 5003ffff;"	\
+		"cp.b 100000 50000000 40000;"			        \
+		"setenv filesize;saveenv\0"				\
+	"upd=run load;run update\0"					\
+	""
+#define CONFIG_BOOTCOMMAND	"run net_nfs"
+
+/*
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS    1          /* we have 2 banks of DRAM */
+#define PHYS_SDRAM_1            0x00000000 /* SDRAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE       0x02000000 /* 32 MB */
+
+#define PHYS_FLASH_1            0x50000000 /* Flash Bank #1 */
+#define PHYS_FLASH_SIZE         0x01000000 /* 16 MB */
+#define PHYS_FLASH_BANK_SIZE    0x01000000 /* 16 MB Banks */
+#define PHYS_FLASH_SECT_SIZE    0x00020000 /* 128 KB sectors (x1) */
+
+#define CFG_DRAM_BASE           0x00000000
+#define CFG_DRAM_SIZE           0x01000000
+
+#define CFG_FLASH_BASE          PHYS_FLASH_1
+#define CFG_MONITOR_BASE	CFG_FLASH_BASE
+#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+
+/*
+ * Expansion bus settings
+ */
+#define CFG_EXP_CS0		0xbcd23c42
+
+/*
+ * SDRAM settings
+ */
+#define CFG_SDR_CONFIG		0x18
+#define CFG_SDR_MODE_CONFIG	0x1
+#define CFG_SDRAM_REFRESH_CNT 	0x81a
+
+/*
+ * FLASH and environment organization
+ */
+#define CFG_MAX_FLASH_BANKS     1       /* max number of memory banks           */
+#define CFG_MAX_FLASH_SECT      128 	/* max number of sectors on one chip    */
+
+#define CFG_FLASH_CFI				/* The flash is CFI compatible	*/
+#define CFG_FLASH_CFI_DRIVER			/* Use common CFI driver	*/
+#define	CFG_ENV_IS_IN_FLASH	1
+
+#define CFG_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
+#define CFG_FLASH_PROTECTION	1	/* hardware flash protection		*/
+
+#define CFG_FLASH_BANKS_LIST	{ PHYS_FLASH_1 }
+
+#define CFG_FLASH_CFI_WIDTH	FLASH_CFI_16BIT	/* no byte writes on IXP4xx	*/
+
+#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+
+#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+
+#define CFG_ENV_SECT_SIZE	0x20000 	/* size of one complete sector	*/
+#define CFG_ENV_ADDR		(PHYS_FLASH_1 + 0x40000)
+#define	CFG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
+
+/* Address and size of Redundant Environment Sector	*/
+#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+
+/*
+ * GPIO settings
+ */
+#define CFG_GPIO_PCI_INTA_N	6
+#define CFG_GPIO_PCI_INTB_N	7
+#define CFG_GPIO_SWITCH_RESET_N	8
+#define CFG_GPIO_SLIC_RESET_N	13
+#define CFG_GPIO_PCI_CLK	14
+#define CFG_GPIO_EXTBUS_CLK	15
+
+/*
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE	32
+
+#endif  /* __CONFIG_H */
diff --git a/include/configs/omap5912osk.h b/include/configs/omap5912osk.h
index 605563a..5db4f52 100644
--- a/include/configs/omap5912osk.h
+++ b/include/configs/omap5912osk.h
@@ -35,6 +35,9 @@
 #define CONFIG_OMAP1610	1		/* 5912 is same as 1610  */
 #define CONFIG_OSK_OMAP5912	1	/*  a OSK Board  */
 
+#define CONFIG_DISPLAY_CPUINFO	1	/* display cpu info (and speed)	*/
+#define CONFIG_DISPLAY_BOARDINFO 1	/* display board info		*/
+
 /* input clock of PLL */
 /* the OMAP5912 OSK has 12MHz input clock */
 #define CONFIG_SYS_CLK_FREQ	12000000
@@ -45,11 +48,13 @@
 
 #define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs  */
 #define CONFIG_SETUP_MEMORY_TAGS	1
+#define CONFIG_INITRD_TAG      1       /* Required for ramdisk support */
 
 /*
  * Size of malloc() pool
  */
 #define CFG_MALLOC_LEN	(CFG_ENV_SIZE + 128*1024)
+#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 
 /*
  * Hardware drivers
@@ -142,27 +147,44 @@
  * Physical Memory Map
  */
 #define CONFIG_NR_DRAM_BANKS	1	/* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1	0x10000000	/* SDRAM Bank #1 */
+#define PHYS_SDRAM_1		0x10000000	/* SDRAM Bank #1 */
 #define PHYS_SDRAM_1_SIZE	0x02000000	/* 32 MB */
 
-#define PHYS_FLASH_1	0x00000000	/* Flash Bank #1 */
+#define PHYS_FLASH_1		0x00000000	/* Flash Bank #1 */
+#define PHYS_FLASH_2		0x01000000	/* Flash Bank #2 */
+
+#define CFG_FLASH_BASE		PHYS_FLASH_1
 
-#define CFG_FLASH_BASE	PHYS_FLASH_1
+#define CFG_MONITOR_BASE       CFG_FLASH_BASE  /* Monitor at beginning of flash */
 
 /*-----------------------------------------------------------------------
- * FLASH and environment organization
+ * FLASH driver setup
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#define CFG_FLASH_CFI          1       /* Flash memory is CFI compliant */
+#define CFG_FLASH_CFI_DRIVER   1       /* Use drivers/cfi_flash.c */
+
+#define CFG_FLASH_BANKS_LIST { PHYS_FLASH_1, PHYS_FLASH_2 }
+
+#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks */
 #define PHYS_FLASH_SIZE	0x02000000	/* 32MB */
 #define CFG_MAX_FLASH_SECT	(259)	/* max number of sectors on one chip */
-/* addr of environment */
-#define CFG_ENV_ADDR	(CFG_FLASH_BASE + 0x020000)
+
+#define CFG_FLASH_USE_BUFFER_WRITE     1       /* Use buffered writes (~10x faster) */
+#define CFG_FLASH_PROTECTION   1       /* Use hardware sector protection */
+
+#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 
 /* timeout values are in ticks */
 #define CFG_FLASH_ERASE_TOUT	(20*CFG_HZ)	/* Timeout for Flash Erase */
 #define CFG_FLASH_WRITE_TOUT	(20*CFG_HZ)	/* Timeout for Flash Write */
 
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
 #define CFG_ENV_IS_IN_FLASH	1
+/* addr of environment */
+#define CFG_ENV_ADDR	(CFG_FLASH_BASE + 0x020000)
+
 #define CFG_ENV_SIZE	0x20000	/* Total Size of Environment Sector */
 #define CFG_ENV_OFFSET	0x20000	/* environment starts here  */
 
diff --git a/include/configs/pcs440ep.h b/include/configs/pcs440ep.h
new file mode 100644
index 0000000..64bbca3
--- /dev/null
+++ b/include/configs/pcs440ep.h
@@ -0,0 +1,412 @@
+/*
+ * (C) Copyright 2006
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/************************************************************************
+ * pcs440ep.h - configuration for PCS440EP board
+ ***********************************************************************/
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*-----------------------------------------------------------------------
+ * High Level Configuration Options
+ *----------------------------------------------------------------------*/
+#define CONFIG_PCS440EP		1	/* Board is PCS440EP            */
+#define CONFIG_440EP		1	/* Specific PPC440EP support    */
+#define CONFIG_4xx		1	/* ... PPC4xx family	        */
+#define CONFIG_SYS_CLK_FREQ	33333333    /* external freq to pll	*/
+
+#define CONFIG_BOARD_EARLY_INIT_F 1     /* Call board_early_init_f	*/
+#define CONFIG_MISC_INIT_R	1	/* call misc_init_r()		*/
+
+/*-----------------------------------------------------------------------
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ *----------------------------------------------------------------------*/
+#define CFG_MONITOR_LEN		(384 * 1024)	/* Reserve 384 kB for Monitor	*/
+#define CFG_MALLOC_LEN		(256 * 1024)	/* Reserve 256 kB for malloc()	*/
+#define CFG_MONITOR_BASE	(-CFG_MONITOR_LEN)
+#define CFG_SDRAM_BASE	        0x00000000	    /* _must_ be 0	*/
+#define CFG_FLASH_BASE	        0xfff00000	    /* start of FLASH	*/
+#define CFG_PCI_MEMBASE	        0xa0000000	    /* mapped pci memory*/
+#define CFG_PCI_MEMBASE1        CFG_PCI_MEMBASE  + 0x10000000
+#define CFG_PCI_MEMBASE2        CFG_PCI_MEMBASE1 + 0x10000000
+#define CFG_PCI_MEMBASE3        CFG_PCI_MEMBASE2 + 0x10000000
+
+/*Don't change either of these*/
+#define CFG_PERIPHERAL_BASE     0xef600000	    /* internal peripherals*/
+#define CFG_PCI_BASE	        0xe0000000	    /* internal PCI regs*/
+/*Don't change either of these*/
+
+#define CFG_USB_DEVICE          0x50000000
+#define CFG_BOOT_BASE_ADDR      0xf0000000
+
+/*-----------------------------------------------------------------------
+ * Initial RAM & stack pointer (placed in SDRAM)
+ *----------------------------------------------------------------------*/
+#define CFG_INIT_RAM_ADDR	0x70000000		/* DCache       */
+#define CFG_INIT_RAM_END	(8 << 10)
+#define CFG_GBL_DATA_SIZE	256			/* num bytes initial data*/
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Serial Port
+ *----------------------------------------------------------------------*/
+#undef CFG_EXT_SERIAL_CLOCK		/* no external clk used		*/
+#define CONFIG_BAUDRATE		115200
+#define CONFIG_SERIAL_MULTI     1
+/*define this if you want console on UART1*/
+#undef CONFIG_UART1_CONSOLE
+
+#define CFG_BAUDRATE_TABLE  \
+    {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+/*-----------------------------------------------------------------------
+ * Environment
+ *----------------------------------------------------------------------*/
+#define CFG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
+
+/*-----------------------------------------------------------------------
+ * FLASH related
+ *----------------------------------------------------------------------*/
+#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
+#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
+
+#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+
+#define CFG_FLASH_WORD_SIZE	unsigned char	/* flash word size (width)	*/
+#define CFG_FLASH_ADDR0		0x5555	/* 1st address for flash config cycles	*/
+#define CFG_FLASH_ADDR1		0x2AAA	/* 2nd address for flash config cycles	*/
+
+#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+
+#ifdef CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_SECT_SIZE	0x10000 	/* size of one complete sector	*/
+#define CFG_ENV_ADDR		(CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
+#define	CFG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
+
+/* Address and size of Redundant Environment Sector	*/
+#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#endif /* CFG_ENV_IS_IN_FLASH */
+
+/*-----------------------------------------------------------------------
+ * DDR SDRAM
+ *----------------------------------------------------------------------*/
+#define CONFIG_SPD_EEPROM               /* Use SPD EEPROM for setup             */
+#undef CONFIG_DDR_ECC			/* don't use ECC			*/
+#define SPD_EEPROM_ADDRESS      {0x50, 0x51}
+
+/*-----------------------------------------------------------------------
+ * I2C
+ *----------------------------------------------------------------------*/
+#define CONFIG_HARD_I2C		1	    /* I2C with hardware support	*/
+#undef	CONFIG_SOFT_I2C			    /* I2C bit-banged		*/
+#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CFG_I2C_SLAVE		0x7F
+
+#define CFG_I2C_MULTI_EEPROMS
+#define CFG_I2C_EEPROM_ADDR	(0xa8>>1)
+#define CFG_I2C_EEPROM_ADDR_LEN 1
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CFG_EEPROM_PAGE_WRITE_BITS 3
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+
+#define CONFIG_PREBOOT	"echo;"	\
+	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+	"echo"
+
+#undef	CONFIG_BOOTARGS
+
+#define	CONFIG_EXTRA_ENV_SETTINGS					\
+	"netdev=eth0\0"							\
+	"hostname=pcs440ep\0"						\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+		"nfsroot=${serverip}:${rootpath}\0"			\
+	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+	"addip=setenv bootargs ${bootargs} "				\
+		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
+		":${hostname}:${netdev}:off panic=1\0"			\
+	"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
+	"flash_nfs=run nfsargs addip addtty;"				\
+		"bootm ${kernel_addr}\0"				\
+	"flash_self=run ramargs addip addtty;"				\
+		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
+	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"     \
+	        "bootm\0"						\
+	"rootpath=/opt/eldk/ppc_4xx\0"					\
+	"bootfile=/tftpboot/pcs440ep/uImage\0"				\
+	"kernel_addr=FFF00000\0"					\
+	"ramdisk_addr=FFF00000\0"					\
+	"load=tftp 100000 /tftpboot/pcs440ep/u-boot.bin\0"		\
+	"update=protect off FFFA0000 FFFFFFFF;era FFFA0000 FFFFFFFF;"	\
+		"cp.b 100000 FFFA0000 60000\0"			        \
+	"upd=run load;run update\0"					\
+	""
+#define CONFIG_BOOTCOMMAND	"run flash_self"
+
+#if 0
+#define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
+#else
+#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
+#endif
+
+#define CONFIG_BAUDRATE		115200
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
+#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+
+#define CONFIG_MII		1	/* MII PHY management		*/
+#define CONFIG_NET_MULTI        1	/* required for netconsole      */
+#define CONFIG_HAS_ETH1		1	/* add support for "eth1addr"	*/
+#define CONFIG_PHY_ADDR		1	/* PHY address, See schematics	*/
+#define CONFIG_PHY1_ADDR        2
+
+#define CFG_RX_ETH_BUFFER	32	/* Number of ethernet rx buffers & descriptors */
+
+#define CONFIG_NETCONSOLE		/* include NetConsole support	*/
+
+/* Partitions */
+#define CONFIG_MAC_PARTITION
+#define CONFIG_DOS_PARTITION
+#define CONFIG_ISO_PARTITION
+
+#ifdef CONFIG_440EP
+/* USB */
+#define CONFIG_USB_OHCI
+#define CONFIG_USB_STORAGE
+
+/*Comment this out to enable USB 1.1 device*/
+#define USB_2_0_DEVICE
+#endif /*CONFIG_440EP*/
+
+#ifdef DEBUG
+#define CONFIG_PANIC_HANG
+#else
+#define CONFIG_HW_WATCHDOG			/* watchdog */
+#endif
+
+#define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
+				CFG_CMD_ASKENV	| \
+				CFG_CMD_DHCP	| \
+				CFG_CMD_DIAG	| \
+				CFG_CMD_ELF	| \
+				CFG_CMD_I2C	| \
+				CFG_CMD_IRQ	| \
+				CFG_CMD_MII	| \
+				CFG_CMD_NET	| \
+				CFG_CMD_NFS	| \
+				CFG_CMD_PCI	| \
+				CFG_CMD_PING	| \
+				CFG_CMD_REGINFO	| \
+				CFG_CMD_SDRAM	| \
+				CFG_CMD_EXT2	| \
+				CFG_CMD_FAT	| \
+				CFG_CMD_USB	)
+
+
+#define CONFIG_SUPPORT_VFAT
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP			/* undef to save memory		*/
+#define CFG_PROMPT	        "=> "	/* Monitor Command Prompt	*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE	        1024	/* Console I/O Buffer Size	*/
+#else
+#define CFG_CBSIZE	        256	/* Console I/O Buffer Size	*/
+#endif
+#define CFG_PBSIZE              (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS	        16	/* max number of command args	*/
+#define CFG_BARGSIZE	        CFG_CBSIZE /* Boot Argument Buffer Size	*/
+
+#define CFG_MEMTEST_START	0x0400000 /* memtest works on	        */
+#define CFG_MEMTEST_END		0x0C00000 /* 4 ... 12 MB in DRAM	*/
+
+#define CFG_LOAD_ADDR		0x100000	/* default load address */
+#define CFG_EXTBDINFO		1	/* To use extended board_into (bd_t) */
+#define CONFIG_LYNXKDI          1       /* support kdi files            */
+
+#define CFG_HZ		        1000	/* decrementer freq: 1 ms ticks */
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *-----------------------------------------------------------------------
+ */
+/* General PCI */
+#define CONFIG_PCI			/* include pci support	        */
+#undef  CONFIG_PCI_PNP			/* do (not) pci plug-and-play   */
+#define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup  */
+#define CFG_PCI_TARGBASE        0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/
+
+/* Board-specific PCI */
+#define CFG_PCI_PRE_INIT                /* enable board pci_pre_init()  */
+#define CFG_PCI_TARGET_INIT
+#define CFG_PCI_MASTER_INIT
+
+#define CFG_PCI_SUBSYS_VENDORID 0x10e8	/* AMCC */
+#define CFG_PCI_SUBSYS_ID       0xcafe	/* Whatever */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * External Bus Controller (EBC) Setup
+ *----------------------------------------------------------------------*/
+#define FLASH_BASE0_PRELIM	0xFFF00000	/* FLASH bank #0	*/
+#define FLASH_BASE1_PRELIM	0xFFF80000	/* FLASH bank #1	*/
+
+#define CFG_FLASH		FLASH_BASE0_PRELIM
+#define CFG_SRAM		0xF1000000
+#define CFG_FPGA		0xF2000000
+#define CFG_CF1			0xF0000000
+#define CFG_CF2			0xF0100000
+
+/* Memory Bank 0 (Flash Bank 0, NOR-FLASH) initialization			*/
+#define CFG_EBC_PB0AP		0x02010000	/* TWT=4,OEN=1			*/
+#define CFG_EBC_PB0CR		(CFG_FLASH | 0x18000) /* BS=1MB,BU=R/W,BW=8bit	*/
+
+/* Memory Bank 1 (SRAM) initialization						*/
+#define CFG_EBC_PB1AP		0x01810040	/* TWT=3,OEN=1,BEM=1		*/
+#define CFG_EBC_PB1CR		(CFG_SRAM | 0x5A000) /* BS=4MB,BU=R/W,BW=16bit	*/
+
+/* Memory Bank 2 (FPGA) initialization						*/
+#define CFG_EBC_PB2AP		0x01010440	/* TWT=2,OEN=1,TH=2,BEM=1	*/
+#define CFG_EBC_PB2CR		(CFG_FPGA | 0x5A000) /* BS=4MB,BU=R/W,BW=16bit	*/
+
+/* Memory Bank 3 (CompactFlash) initialization					*/
+#define CFG_EBC_PB3AP		0x080BD400
+#define CFG_EBC_PB3CR		(CFG_CF1 | 0x1A000) /* BS=1MB,BU=R/W,BW=16bit	*/
+
+/* Memory Bank 4 (CompactFlash) initialization					*/
+#define CFG_EBC_PB4AP		0x080BD400
+#define CFG_EBC_PB4CR		(CFG_CF2 | 0x1A000) /* BS=1MB,BU=R/W,BW=16bit	*/
+
+/*-----------------------------------------------------------------------
+ * PPC440 GPIO Configuration
+ */
+#define CFG_440_GPIO_TABLE { /*		GPIO	Alternate1	Alternate2	Alternate3 */ \
+{											\
+/* GPIO Core 0 */									\
+{ GPIO0_BASE, GPIO_OUT, GPIO_SEL },  /* GPIO0	EBC_ADDR(7)	DMA_REQ(2)	*/	\
+{ GPIO0_BASE, GPIO_OUT, GPIO_SEL },  /* GPIO1	EBC_ADDR(6)	DMA_ACK(2)	*/	\
+{ GPIO0_BASE, GPIO_OUT, GPIO_SEL },  /* GPIO2	EBC_ADDR(5)	DMA_EOT/TC(2)	*/	\
+{ GPIO0_BASE, GPIO_OUT, GPIO_SEL },  /* GPIO3	EBC_ADDR(4)	DMA_REQ(3)	*/	\
+{ GPIO0_BASE, GPIO_OUT, GPIO_SEL },  /* GPIO4	EBC_ADDR(3)	DMA_ACK(3)	*/	\
+{ GPIO0_BASE, GPIO_OUT, GPIO_SEL },  /* GPIO5	EBC_ADDR(2)	DMA_EOT/TC(3)	*/	\
+{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO6	EBC_CS_N(1)			*/	\
+{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO7	EBC_CS_N(2)			*/	\
+{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO8	EBC_CS_N(3)			*/	\
+{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO9	EBC_CS_N(4)			*/	\
+{ GPIO0_BASE, GPIO_OUT, GPIO_SEL },  /* GPIO10	EBC_CS_N(5)			*/	\
+{ GPIO0_BASE, GPIO_OUT, GPIO_SEL },  /* GPIO11	EBC_BUS_ERR			*/	\
+{ GPIO0_BASE, GPIO_IN,  GPIO_ALT1 }, /* GPIO12	ZII_p0Rxd(0)			*/	\
+{ GPIO0_BASE, GPIO_IN,  GPIO_ALT1 }, /* GPIO13	ZII_p0Rxd(1)			*/	\
+{ GPIO0_BASE, GPIO_IN,  GPIO_ALT1 }, /* GPIO14	ZII_p0Rxd(2)			*/	\
+{ GPIO0_BASE, GPIO_IN,  GPIO_ALT1 }, /* GPIO15	ZII_p0Rxd(3)			*/	\
+{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO16	ZII_p0Txd(0)			*/	\
+{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO17	ZII_p0Txd(1)			*/	\
+{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO18	ZII_p0Txd(2)			*/	\
+{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO19	ZII_p0Txd(3)			*/	\
+{ GPIO0_BASE, GPIO_IN,  GPIO_ALT1 }, /* GPIO20	ZII_p0Rx_er			*/	\
+{ GPIO0_BASE, GPIO_IN,  GPIO_ALT1 }, /* GPIO21	ZII_p0Rx_dv			*/	\
+{ GPIO0_BASE, GPIO_IN,  GPIO_ALT1 }, /* GPIO22	ZII_p0RxCrs			*/	\
+{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO23	ZII_p0Tx_er			*/	\
+{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO24	ZII_p0Tx_en			*/	\
+{ GPIO0_BASE, GPIO_IN,  GPIO_ALT1 }, /* GPIO25	ZII_p0Col			*/	\
+{ GPIO0_BASE, GPIO_IN,  GPIO_SEL },  /* GPIO26			USB2D_RXVALID	*/	\
+{ GPIO0_BASE, GPIO_IN,  GPIO_SEL },  /* GPIO27	EXT_EBC_REQ	USB2D_RXERROR	*/	\
+{ GPIO0_BASE, GPIO_IN,  GPIO_SEL },  /* GPIO28			USB2D_TXVALID	*/	\
+{ GPIO0_BASE, GPIO_IN,  GPIO_SEL },  /* GPIO29	EBC_EXT_HDLA	USB2D_PAD_SUSPNDM */	\
+{ GPIO0_BASE, GPIO_IN,  GPIO_SEL },  /* GPIO30	EBC_EXT_ACK	USB2D_XCVRSELECT*/	\
+{ GPIO0_BASE, GPIO_IN,  GPIO_SEL },  /* GPIO31	EBC_EXR_BUSREQ	USB2D_TERMSELECT*/	\
+},											\
+{											\
+/* GPIO Core 1 */									\
+{ GPIO1_BASE, GPIO_IN,  GPIO_SEL },  /* GPIO32	USB2D_OPMODE0			*/	\
+{ GPIO1_BASE, GPIO_IN,  GPIO_SEL },  /* GPIO33	USB2D_OPMODE1			*/	\
+{ GPIO1_BASE, GPIO_OUT, GPIO_ALT3 }, /* GPIO34	UART0_DCD_N	UART1_DSR_CTS_N	UART2_SOUT*/ \
+{ GPIO1_BASE, GPIO_IN,  GPIO_ALT3 }, /* GPIO35	UART0_8PIN_DSR_N UART1_RTS_DTR_N UART2_SIN*/ \
+{ GPIO1_BASE, GPIO_IN,  GPIO_ALT1 }, /* GPIO36	UART0_8PIN_CTS_N		UART3_SIN*/ \
+{ GPIO1_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO37	UART0_RTS_N			*/	\
+{ GPIO1_BASE, GPIO_OUT, GPIO_ALT2 }, /* GPIO38	UART0_DTR_N	UART1_SOUT	*/	\
+{ GPIO1_BASE, GPIO_IN,  GPIO_ALT2 }, /* GPIO39	UART0_RI_N	UART1_SIN	*/	\
+{ GPIO1_BASE, GPIO_IN,  GPIO_ALT1 }, /* GPIO40	UIC_IRQ(0)			*/	\
+{ GPIO1_BASE, GPIO_IN,  GPIO_ALT1 }, /* GPIO41	UIC_IRQ(1)			*/	\
+{ GPIO1_BASE, GPIO_IN,  GPIO_ALT1 }, /* GPIO42	UIC_IRQ(2)			*/	\
+{ GPIO1_BASE, GPIO_IN,  GPIO_ALT1 }, /* GPIO43	UIC_IRQ(3)			*/	\
+{ GPIO1_BASE, GPIO_IN,  GPIO_ALT1 }, /* GPIO44	UIC_IRQ(4)	DMA_ACK(1)	*/	\
+{ GPIO1_BASE, GPIO_IN,  GPIO_SEL },  /* GPIO45	UIC_IRQ(6)	DMA_EOT/TC(1)	*/	\
+{ GPIO1_BASE, GPIO_BI,  GPIO_SEL },  /* GPIO46	UIC_IRQ(7)	DMA_REQ(0)	*/	\
+{ GPIO1_BASE, GPIO_IN,  GPIO_SEL },  /* GPIO47	UIC_IRQ(8)	DMA_ACK(0)	*/	\
+{ GPIO1_BASE, GPIO_IN,  GPIO_SEL },  /* GPIO48	UIC_IRQ(9)	DMA_EOT/TC(0)	*/	\
+{ GPIO1_BASE, GPIO_IN,  GPIO_SEL },  /* GPIO49  Unselect via TraceSelect Bit	*/	\
+{ GPIO1_BASE, GPIO_IN,  GPIO_SEL },  /* GPIO50  Unselect via TraceSelect Bit	*/	\
+{ GPIO1_BASE, GPIO_IN,  GPIO_SEL },  /* GPIO51  Unselect via TraceSelect Bit	*/	\
+{ GPIO1_BASE, GPIO_IN,  GPIO_SEL },  /* GPIO52  Unselect via TraceSelect Bit	*/	\
+{ GPIO1_BASE, GPIO_IN,  GPIO_SEL },  /* GPIO53  Unselect via TraceSelect Bit	*/	\
+{ GPIO1_BASE, GPIO_IN,  GPIO_SEL },  /* GPIO54  Unselect via TraceSelect Bit	*/	\
+{ GPIO1_BASE, GPIO_IN,  GPIO_SEL },  /* GPIO55  Unselect via TraceSelect Bit	*/	\
+{ GPIO1_BASE, GPIO_IN,  GPIO_SEL },  /* GPIO56  Unselect via TraceSelect Bit	*/	\
+{ GPIO1_BASE, GPIO_IN,  GPIO_SEL },  /* GPIO57  Unselect via TraceSelect Bit	*/	\
+{ GPIO1_BASE, GPIO_IN,  GPIO_SEL },  /* GPIO58  Unselect via TraceSelect Bit	*/	\
+{ GPIO1_BASE, GPIO_IN,  GPIO_SEL },  /* GPIO59  Unselect via TraceSelect Bit	*/	\
+{ GPIO1_BASE, GPIO_IN,  GPIO_SEL },  /* GPIO60  Unselect via TraceSelect Bit	*/	\
+{ GPIO1_BASE, GPIO_IN,  GPIO_SEL },  /* GPIO61  Unselect via TraceSelect Bit	*/	\
+{ GPIO1_BASE, GPIO_IN,  GPIO_SEL },  /* GPIO62  Unselect via TraceSelect Bit	*/	\
+{ GPIO1_BASE, GPIO_IN,  GPIO_SEL },  /* GPIO63  Unselect via TraceSelect Bit	*/	\
+}											\
+}
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_DCACHE_SIZE		(32<<10) /* For AMCC 440 CPUs			*/
+#define CFG_CACHELINE_SIZE	32	/* ...			*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
+#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
+#endif
+
+#endif	/* __CONFIG_H */
diff --git a/include/configs/pdnb3.h b/include/configs/pdnb3.h
new file mode 100644
index 0000000..ba6b113
--- /dev/null
+++ b/include/configs/pdnb3.h
@@ -0,0 +1,307 @@
+/*
+ * (C) Copyright 2006
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * Configuation settings for the PDNB3 board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_IXP425		1       /* This is an IXP425 CPU	*/
+#define CONFIG_PDNB3		1       /* on an PDNB3 board		*/
+
+#define CONFIG_DISPLAY_CPUINFO	1	/* display cpu info (and speed)	*/
+#define CONFIG_DISPLAY_BOARDINFO 1	/* display board info		*/
+
+/*
+ * Ethernet
+ */
+#define CONFIG_IXP4XX_NPE	1	/* include IXP4xx NPE support	*/
+#define CONFIG_NET_MULTI	1
+#define	CONFIG_PHY_ADDR		16	/* NPE0 PHY address		*/
+#define CONFIG_HAS_ETH1
+#define CONFIG_PHY1_ADDR	18	/* NPE1 PHY address		*/
+#define CONFIG_MII		1	/* MII PHY management		*/
+#define CFG_RX_ETH_BUFFER	16	/* Number of ethernet rx buffers & descriptors */
+
+/*
+ * Misc configuration options
+ */
+#define CONFIG_USE_IRQ          1	/* we need IRQ stuff for timer	*/
+
+#define CONFIG_BOOTCOUNT_LIMIT		/* support for bootcount limit	*/
+#define CFG_BOOTCOUNT_ADDR	0x60003000 /* inside qmrg sram		*/
+
+#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs	*/
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG	1
+
+/*
+ * Size of malloc() pool
+ */
+#define CFG_MALLOC_LEN		(1 << 20)
+#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_BAUDRATE         115200
+#define CFG_IXP425_CONSOLE	IXP425_UART1   /* we use UART1 for console */
+
+#define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
+				CFG_CMD_DHCP	| \
+				CFG_CMD_DATE	| \
+				CFG_CMD_NET	| \
+				CFG_CMD_MII	| \
+				CFG_CMD_NAND	| \
+				CFG_CMD_I2C	| \
+				CFG_CMD_ELF	| \
+				CFG_CMD_PING)
+
+/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+/* These are u-boot generic parameters */
+#include <cmd_confdefs.h>
+
+#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
+#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP                            /* undef to save memory         */
+#define CFG_PROMPT              "=> "   /* Monitor Command Prompt       */
+#define CFG_CBSIZE              256             /* Console I/O Buffer Size      */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS             16              /* max number of command args   */
+#define CFG_BARGSIZE            CFG_CBSIZE      /* Boot Argument Buffer Size    */
+
+#define CFG_MEMTEST_START       0x00400000      /* memtest works on     */
+#define CFG_MEMTEST_END         0x00800000      /* 4 ... 8 MB in DRAM   */
+#define CFG_LOAD_ADDR           0x00010000      /* default load address */
+
+#undef  CFG_CLKS_IN_HZ          /* everything, incl board info, in Hz */
+#define CFG_HZ			1000		/* decrementer freq: 1 ms ticks */
+						/* valid baudrates */
+#define CFG_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
+
+/*
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE        (128*1024)      /* regular stack */
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ    (4*1024)        /* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ    (4*1024)        /* FIQ stack */
+#endif
+
+/***************************************************************
+ * Platform/Board specific defines start here.
+ ***************************************************************/
+
+/*-----------------------------------------------------------------------
+ * Default configuration (environment varibles...)
+ *----------------------------------------------------------------------*/
+#define CONFIG_PREBOOT	"echo;"	\
+	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+	"echo"
+
+#undef	CONFIG_BOOTARGS
+
+#define	CONFIG_EXTRA_ENV_SETTINGS					\
+	"netdev=eth0\0"							\
+	"hostname=pdnb3\0"						\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+		"nfsroot=${serverip}:${rootpath}\0"			\
+	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+	"addip=setenv bootargs ${bootargs} ethaddr=${ethaddr} "		\
+		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
+		":${hostname}:${netdev}:off panic=1\0"			\
+	"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate} "	\
+	"mtdparts=${mtdparts}\0"					\
+	"flash_nfs=run nfsargs addip addtty;"				\
+		"bootm ${kernel_addr}\0"				\
+	"flash_self=run ramargs addip addtty;"				\
+		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
+	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"     \
+	        "bootm\0"						\
+	"rootpath=/opt/buildroot\0"					\
+	"bootfile=/tftpboot/netbox/uImage\0"				\
+	"kernel_addr=50080000\0"					\
+	"ramdisk_addr=50200000\0"					\
+	"load=tftp 100000 /tftpboot/netbox/u-boot.bin\0"		\
+	"update=protect off 50000000 5007dfff;era 50000000 5007dfff;"	\
+		"cp.b 100000 50000000 ${filesize};"			\
+		"setenv filesize;saveenv\0"				\
+	"upd=run load;run update\0"					\
+	"ipaddr=10.0.0.233\0"						\
+	"serverip=10.0.0.152\0"						\
+	"netmask=255.255.0.0\0"					\
+	"ethaddr=c6:6f:13:36:f3:81\0"					\
+	"eth1addr=c6:6f:13:36:f3:82\0"					\
+	"mtdparts=IXP4XX-Flash.0:504k@0(uboot),4k@504k(env),"		\
+	"4k@508k(renv)\0"						\
+	""
+#define CONFIG_BOOTCOMMAND	"run net_nfs"
+
+/*
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS    1          /* we have 1 bank of DRAM */
+#define PHYS_SDRAM_1            0x00000000 /* SDRAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE       0x02000000 /* 32 MB */
+
+#define CFG_FLASH_BASE          0x50000000
+#define CFG_MONITOR_BASE	CFG_FLASH_BASE
+#define CFG_MONITOR_LEN		(504 << 10)	/* Reserve 512 kB for Monitor	*/
+
+/*
+ * Expansion bus settings
+ */
+#define CFG_EXP_CS0		0x94913C43	/* 8bit, max size		*/
+#define CFG_EXP_CS1		0x85000043	/* 8bit, 512bytes		*/
+
+/*
+ * SDRAM settings
+ */
+#define CFG_SDR_CONFIG		0x18
+#define CFG_SDR_MODE_CONFIG	0x1
+#define CFG_SDRAM_REFRESH_CNT 	0x81a
+
+/*
+ * FLASH and environment organization
+ */
+#define FLASH_BASE0_PRELIM	CFG_FLASH_BASE		/* FLASH bank #0	*/
+
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
+
+#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CFG_FLASH_WRITE_TOUT	1000	/* Timeout for Flash Write (in ms)	*/
+
+#define CFG_FLASH_WORD_SIZE	unsigned char	/* flash word size (width)	*/
+#define CFG_FLASH_ADDR0		0x5555	/* 1st address for flash config cycles	*/
+#define CFG_FLASH_ADDR1		0x2AAA	/* 2nd address for flash config cycles	*/
+/*
+ * The following defines are added for buggy IOP480 byte interface.
+ * All other boards should use the standard values (CPCI405 etc.)
+ */
+#define CFG_FLASH_READ0		0x0000	/* 0 is standard			*/
+#define CFG_FLASH_READ1		0x0001	/* 1 is standard			*/
+#define CFG_FLASH_READ2		0x0002	/* 2 is standard			*/
+
+#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+
+#define	CFG_ENV_IS_IN_FLASH	1
+
+#define CFG_ENV_SECT_SIZE	0x1000 	/* size of one complete sector	*/
+#define CFG_ENV_ADDR		(CFG_FLASH_BASE + CFG_MONITOR_LEN)
+#define	CFG_ENV_SIZE		0x1000	/* Total Size of Environment Sector	*/
+
+/* Address and size of Redundant Environment Sector	*/
+#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+
+/*
+ * NAND-FLASH stuff
+ */
+#define CFG_MAX_NAND_DEVICE	1
+#define NAND_MAX_CHIPS		1
+#define CFG_NAND_BASE		0x51000000	/* NAND FLASH Base Address	*/
+
+/*
+ * GPIO settings
+ */
+
+/* FPGA program pin configuration */
+#define CFG_GPIO_PRG		12		/* FPGA program pin (cpu output)*/
+#define CFG_GPIO_CLK		10		/* FPGA clk pin (cpu output)    */
+#define CFG_GPIO_DATA		14		/* FPGA data pin (cpu output)   */
+#define CFG_GPIO_INIT		13		/* FPGA init pin (cpu input)    */
+#define CFG_GPIO_DONE		11		/* FPGA done pin (cpu input)    */
+
+/* other GPIO's */
+#define CFG_GPIO_RESTORE_INT	0
+#define CFG_GPIO_RESTART_INT	1
+#define CFG_GPIO_SYS_RUNNING	2
+#define CFG_GPIO_PCI_INTA	3
+#define CFG_GPIO_PCI_INTB	4
+#define CFG_GPIO_I2C_SCL	6
+#define CFG_GPIO_I2C_SDA	7
+#define CFG_GPIO_FPGA_RESET	9
+#define CFG_GPIO_CLK_33M	15
+
+/*
+ * I2C stuff
+ */
+
+/* enable I2C and select the hardware/software driver */
+#undef	CONFIG_HARD_I2C			/* I2C with hardware support	*/
+#define	CONFIG_SOFT_I2C		1	/* I2C bit-banged		*/
+
+#define CFG_I2C_SPEED		83000	/* 83 kHz is supposed to work	*/
+#define CFG_I2C_SLAVE		0xFE
+
+/*
+ * Software (bit-bang) I2C driver configuration
+ */
+#define PB_SCL		(1 << CFG_GPIO_I2C_SCL)
+#define PB_SDA		(1 << CFG_GPIO_I2C_SDA)
+
+#define I2C_INIT	GPIO_OUTPUT_ENABLE(CFG_GPIO_I2C_SCL)
+#define I2C_ACTIVE	GPIO_OUTPUT_ENABLE(CFG_GPIO_I2C_SDA)
+#define I2C_TRISTATE	GPIO_OUTPUT_DISABLE(CFG_GPIO_I2C_SDA)
+#define I2C_READ	((*IXP425_GPIO_GPINR & PB_SDA) != 0)
+#define I2C_SDA(bit)	if (bit) GPIO_OUTPUT_SET(CFG_GPIO_I2C_SDA);	\
+	                else     GPIO_OUTPUT_CLEAR(CFG_GPIO_I2C_SDA)
+#define I2C_SCL(bit)	if (bit) GPIO_OUTPUT_SET(CFG_GPIO_I2C_SCL);	\
+			else     GPIO_OUTPUT_CLEAR(CFG_GPIO_I2C_SCL)
+#define I2C_DELAY	udelay(3)	/* 1/4 I2C clock duration */
+
+/*
+ * I2C RTC
+ */
+#define CONFIG_RTC_M41T11	1
+#define CFG_I2C_RTC_ADDR	0x68
+#define CFG_M41T11_BASE_YEAR	1900	/* play along with the linux driver */
+
+/*
+ * Spartan3 FPGA configuration support
+ */
+#define CFG_FPGA_MAX_SIZE	700*1024	/* 700kByte for XC3S500E	*/
+
+#define CFG_FPGA_PRG	(1 << CFG_GPIO_PRG)	/* FPGA program pin (cpu output)*/
+#define CFG_FPGA_CLK	(1 << CFG_GPIO_CLK)	/* FPGA clk pin (cpu output)    */
+#define CFG_FPGA_DATA	(1 << CFG_GPIO_DATA)	/* FPGA data pin (cpu output)   */
+#define CFG_FPGA_INIT	(1 << CFG_GPIO_INIT)	/* FPGA init pin (cpu input)    */
+#define CFG_FPGA_DONE	(1 << CFG_GPIO_DONE)	/* FPGA done pin (cpu input)    */
+
+/*
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE	32
+
+#endif  /* __CONFIG_H */
diff --git a/include/configs/r5200.h b/include/configs/r5200.h
index 7049704..e1e406b 100644
--- a/include/configs/r5200.h
+++ b/include/configs/r5200.h
@@ -72,7 +72,7 @@
 #include <cmd_confdefs.h>
 
 /* Note: We only copy one sectors worth of application code from location
- * 10200000 for speed purposes.  Increase the size if necessary */ 
+ * 10200000 for speed purposes.  Increase the size if necessary */
 #define CONFIG_BOOTCOMMAND	"cp.b 10200000 0 20000; go 400"
 #define	CONFIG_BOOTDELAY	1
 
diff --git a/include/configs/virtlab2.h b/include/configs/virtlab2.h
new file mode 100644
index 0000000..06d8536
--- /dev/null
+++ b/include/configs/virtlab2.h
@@ -0,0 +1,461 @@
+/*
+ * (C) Copyright 2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_MPC823		1	/* This is a MPC823 CPU		*/
+#define CONFIG_VIRTLAB2		1	/* ...on a virtlab2 module	*/
+#define	CONFIG_TQM8xxL		1
+
+#ifdef	CONFIG_LCD			/* with LCD controller ?	*/
+#define	CONFIG_SPLASH_SCREEN		/* ... with splashscreen support*/
+#endif
+
+#define	CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		*/
+#undef	CONFIG_8xx_CONS_SMC2
+#undef	CONFIG_8xx_CONS_NONE
+#define CONFIG_BAUDRATE		115200	/* console baudrate = 115kbps	*/
+
+#define	CONFIG_BOOTCOUNT_LIMIT
+
+#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
+
+#define CONFIG_BOARD_TYPES	1	/* support board types		*/
+
+#define CONFIG_PREBOOT	"echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo"
+
+#undef	CONFIG_BOOTARGS
+
+#define	CONFIG_EXTRA_ENV_SETTINGS					\
+	"netdev=eth0\0"							\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+		"nfsroot=${serverip}:${rootpath}\0"			\
+	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+	"addip=setenv bootargs ${bootargs} "				\
+		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
+		":${hostname}:${netdev}:off panic=1\0"			\
+	"flash_nfs=run nfsargs addip;"					\
+		"bootm ${kernel_addr}\0"				\
+	"flash_self=run ramargs addip;"					\
+		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
+	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
+	"rootpath=/opt/eldk/ppc_8xx\0"					\
+	"bootfile=/tftpboot/TQM823L/uImage\0"				\
+	"kernel_addr=40040000\0"					\
+	"ramdisk_addr=40100000\0"					\
+	""
+#define CONFIG_BOOTCOMMAND	"run flash_self"
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
+#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+
+#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
+
+#if defined(CONFIG_LCD)
+# undef	 CONFIG_STATUS_LED		/* disturbs display		*/
+#else
+# define CONFIG_STATUS_LED	1	/* Status LED enabled		*/
+#endif	/* CONFIG_LCD */
+
+#undef	CONFIG_CAN_DRIVER		/* CAN Driver support disabled	*/
+
+#define CONFIG_BOOTP_MASK	(CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+
+#define CONFIG_MAC_PARTITION
+#define CONFIG_DOS_PARTITION
+
+#define	CONFIG_RTC_MPC8xx		/* use internal RTC of MPC8xx	*/
+
+#ifdef	CONFIG_SPLASH_SCREEN
+# define CONFIG_COMMANDS      ( CONFIG_CMD_DFL	| \
+				CFG_CMD_ASKENV	| \
+				CFG_CMD_BMP	| \
+				CFG_CMD_DATE	| \
+				CFG_CMD_DHCP	| \
+				CFG_CMD_IDE	| \
+				CFG_CMD_NFS	| \
+				CFG_CMD_SNTP	)
+#else
+# define CONFIG_COMMANDS      ( CONFIG_CMD_DFL	| \
+				CFG_CMD_ASKENV	| \
+				CFG_CMD_DATE	| \
+				CFG_CMD_DHCP	| \
+				CFG_CMD_IDE	| \
+				CFG_CMD_NFS	| \
+				CFG_CMD_SNTP	)
+#endif
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * Miscellaneous configurable options
+ */
+#define	CFG_LONGHELP			/* undef to save memory		*/
+#define	CFG_PROMPT		"=> "	/* Monitor Command Prompt	*/
+
+#if 0
+#define	CFG_HUSH_PARSER		1	/* use "hush" command parser	*/
+#endif
+#ifdef	CFG_HUSH_PARSER
+#define	CFG_PROMPT_HUSH_PS2	"> "
+#endif
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define	CFG_CBSIZE		1024	/* Console I/O Buffer Size	*/
+#else
+#define	CFG_CBSIZE		256	/* Console I/O Buffer Size	*/
+#endif
+#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define	CFG_MAXARGS		16	/* max number of command args	*/
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+
+#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+
+#define	CFG_LOAD_ADDR		0x100000	/* default load address	*/
+
+#define	CFG_HZ			1000	/* decrementer freq: 1 ms ticks	*/
+
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+/*-----------------------------------------------------------------------
+ * Internal Memory Mapped Register
+ */
+#define CFG_IMMR		0xFFF00000
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+#define CFG_INIT_RAM_ADDR	CFG_IMMR
+#define	CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define	CFG_SDRAM_BASE		0x00000000
+#define CFG_FLASH_BASE		0x40000000
+#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CFG_MONITOR_BASE	CFG_FLASH_BASE
+#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
+#define CFG_MAX_FLASH_SECT	71	/* max number of sectors on one chip	*/
+
+#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+
+#define	CFG_ENV_IS_IN_FLASH	1
+#define	CFG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
+#define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
+
+/* Address and size of Redundant Environment Sector	*/
+#define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SIZE)
+#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+
+/*-----------------------------------------------------------------------
+ * Hardware Information Block
+ */
+#define CFG_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
+#define CFG_HWINFO_SIZE		0x00000040	/* size   of HW Info block */
+#define CFG_HWINFO_MAGIC	0x54514D38	/* 'TQM8' */
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#endif
+
+/*-----------------------------------------------------------------------
+ * SYPCR - System Protection Control				11-9
+ * SYPCR can only be written once after reset!
+ *-----------------------------------------------------------------------
+ * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
+ */
+#if defined(CONFIG_WATCHDOG)
+#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
+#else
+#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#endif
+
+/*-----------------------------------------------------------------------
+ * SIUMCR - SIU Module Configuration				11-6
+ *-----------------------------------------------------------------------
+ * PCMCIA config., multi-function pin tri-state
+ */
+#ifndef	CONFIG_CAN_DRIVER
+#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#else	/* we must activate GPL5 in the SIUMCR for CAN */
+#define CFG_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#endif	/* CONFIG_CAN_DRIVER */
+
+/*-----------------------------------------------------------------------
+ * TBSCR - Time Base Status and Control				11-26
+ *-----------------------------------------------------------------------
+ * Clear Reference Interrupt Status, Timebase freezing enabled
+ */
+#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+
+/*-----------------------------------------------------------------------
+ * RTCSC - Real-Time Clock Status and Control Register		11-27
+ *-----------------------------------------------------------------------
+ */
+#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
+
+/*-----------------------------------------------------------------------
+ * PISCR - Periodic Interrupt Status and Control		11-31
+ *-----------------------------------------------------------------------
+ * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
+ */
+#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+
+/*-----------------------------------------------------------------------
+ * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
+ *-----------------------------------------------------------------------
+ * Reset PLL lock status sticky bit, timer expired status bit and timer
+ * interrupt status bit
+ */
+#define CFG_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
+
+/*-----------------------------------------------------------------------
+ * SCCR - System Clock and reset Control Register		15-27
+ *-----------------------------------------------------------------------
+ * Set clock output, timebase and RTC source and divider,
+ * power management and some other internal clocks
+ */
+#define SCCR_MASK	SCCR_EBDF11
+#define CFG_SCCR	(SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
+			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
+			 SCCR_DFALCD00)
+
+/*-----------------------------------------------------------------------
+ * PCMCIA stuff
+ *-----------------------------------------------------------------------
+ *
+ */
+#define CFG_PCMCIA_MEM_ADDR	(0xE0000000)
+#define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
+#define CFG_PCMCIA_DMA_ADDR	(0xE4000000)
+#define CFG_PCMCIA_DMA_SIZE	( 64 << 20 )
+#define CFG_PCMCIA_ATTRB_ADDR	(0xE8000000)
+#define CFG_PCMCIA_ATTRB_SIZE	( 64 << 20 )
+#define CFG_PCMCIA_IO_ADDR	(0xEC000000)
+#define CFG_PCMCIA_IO_SIZE	( 64 << 20 )
+
+/*-----------------------------------------------------------------------
+ * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
+ *-----------------------------------------------------------------------
+ */
+
+#define	CONFIG_IDE_8xx_PCCARD	1	/* Use IDE with PC Card	Adapter	*/
+
+#undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE    not supported	*/
+#undef	CONFIG_IDE_LED			/* LED   for ide not supported	*/
+#undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
+
+#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
+
+#define CFG_ATA_IDE0_OFFSET	0x0000
+
+#define CFG_ATA_BASE_ADDR	CFG_PCMCIA_MEM_ADDR
+
+/* Offset for data I/O			*/
+#define CFG_ATA_DATA_OFFSET	(CFG_PCMCIA_MEM_SIZE + 0x320)
+
+/* Offset for normal register accesses	*/
+#define CFG_ATA_REG_OFFSET	(2 * CFG_PCMCIA_MEM_SIZE + 0x320)
+
+/* Offset for alternate registers	*/
+#define CFG_ATA_ALT_OFFSET	0x0100
+
+/*-----------------------------------------------------------------------
+ *
+ *-----------------------------------------------------------------------
+ *
+ */
+#define CFG_DER	0
+
+/*
+ * Init Memory Controller:
+ *
+ * BR0/1 and OR0/1 (FLASH)
+ */
+
+#define FLASH_BASE0_PRELIM	0x40000000	/* FLASH bank #0	*/
+#define FLASH_BASE1_PRELIM	0x60000000	/* FLASH bank #0	*/
+
+/* used to re-map FLASH both when starting from SRAM or FLASH:
+ * restrict access enough to keep SRAM working (if any)
+ * but not too much to meddle with FLASH accesses
+ */
+#define CFG_REMAP_OR_AM		0x80000000	/* OR addr mask */
+#define CFG_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
+
+/*
+ * FLASH timing:
+ */
+#define CFG_OR_TIMING_FLASH	(OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
+				 OR_SCY_3_CLK | OR_EHTR | OR_BI)
+
+#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
+#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
+#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
+
+#define CFG_OR1_REMAP	CFG_OR0_REMAP
+#define CFG_OR1_PRELIM	CFG_OR0_PRELIM
+#define CFG_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
+
+/*
+ * BR2/3 and OR2/3 (SDRAM)
+ *
+ */
+#define SDRAM_BASE2_PRELIM	0x00000000	/* SDRAM bank #0	*/
+#define SDRAM_BASE3_PRELIM	0x20000000	/* SDRAM bank #1	*/
+#define	SDRAM_MAX_SIZE		0x04000000	/* max 64 MB per bank	*/
+
+/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
+#define CFG_OR_TIMING_SDRAM	0x00000A00
+
+#define CFG_OR2_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM )
+#define CFG_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+
+#ifndef	CONFIG_CAN_DRIVER
+#define	CFG_OR3_PRELIM	CFG_OR2_PRELIM
+#define CFG_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#else	/* CAN uses CS3#, so we can have only one SDRAM bank anyway */
+#define	CFG_CAN_BASE		0xC0000000	/* CAN mapped at 0xC0000000	*/
+#define CFG_CAN_OR_AM		0xFFFF8000	/* 32 kB address mask		*/
+#define CFG_OR3_CAN		(CFG_CAN_OR_AM | OR_G5LA | OR_BI)
+#define CFG_BR3_CAN		((CFG_CAN_BASE & BR_BA_MSK) | \
+					BR_PS_8 | BR_MS_UPMB | BR_V )
+#endif	/* CONFIG_CAN_DRIVER */
+
+/*
+ * Memory Periodic Timer Prescaler
+ *
+ * The Divider for PTA (refresh timer) configuration is based on an
+ * example SDRAM configuration (64 MBit, one bank). The adjustment to
+ * the number of chip selects (NCS) and the actually needed refresh
+ * rate is done by setting MPTPR.
+ *
+ * PTA is calculated from
+ *	PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS)
+ *
+ *	gclk	  CPU clock (not bus clock!)
+ *	Trefresh  Refresh cycle * 4 (four word bursts used)
+ *
+ * 4096  Rows from SDRAM example configuration
+ * 1000  factor s -> ms
+ *   32  PTP (pre-divider from MPTPR) from SDRAM example configuration
+ *    4  Number of refresh cycles per period
+ *   64  Refresh cycle in ms per number of rows
+ * --------------------------------------------
+ * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000
+ *
+ * 50 MHz => 50.000.000 / Divider =  98
+ * 66 Mhz => 66.000.000 / Divider = 129
+ * 80 Mhz => 80.000.000 / Divider = 156
+ */
+
+#define CFG_PTA_PER_CLK	((4096 * 32 * 1000) / (4 * 64))
+#define CFG_MAMR_PTA	98
+
+/*
+ * For 16 MBit, refresh rates could be 31.3 us
+ * (= 64 ms / 2K = 125 / quad bursts).
+ * For a simpler initialization, 15.6 us is used instead.
+ *
+ * #define CFG_MPTPR_2BK_2K	MPTPR_PTP_DIV32		for 2 banks
+ * #define CFG_MPTPR_1BK_2K	MPTPR_PTP_DIV64		for 1 bank
+ */
+#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
+#define CFG_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
+
+/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
+#define CFG_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
+#define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
+
+/*
+ * MAMR settings for SDRAM
+ */
+
+/* 8 column SDRAM */
+#define CFG_MAMR_8COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
+			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
+/* 9 column SDRAM */
+#define CFG_MAMR_9COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
+			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
+
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
+#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
+
+/* Map peripheral control registers on CS4 */
+#define CFG_PERIPHERAL_BASE 0xA0000000
+#define CFG_PERIPHERAL_OR_AM 0xFFFF8000 /* 32 kB address mask */
+#define CFG_OR4_PRELIM (CFG_PERIPHERAL_OR_AM | OR_TRLX | OR_CSNT_SAM | \
+						OR_SCY_2_CLK)
+#define CFG_BR4_PRELIM ((CFG_PERIPHERAL_BASE & BR_BA_MSK) | BR_PS_8 | BR_V)
+#define PCMCIA_CTRL (CFG_PERIPHERAL_BASE + 0xB00)
+#endif	/* __CONFIG_H */
diff --git a/include/configs/yellowstone.h b/include/configs/yellowstone.h
index d3e9671..7d55566 100644
--- a/include/configs/yellowstone.h
+++ b/include/configs/yellowstone.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2005
+ * (C) Copyright 2005-2006
  * Stefan Roese, DENX Software Engineering, sr@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -174,7 +174,7 @@
 	"rootpath=/opt/eldk/ppc_4xx\0"					\
 	"bootfile=/tftpboot/yellowstone/uImage\0"			\
 	"kernel_addr=fc000000\0"					\
-	"ramdisk_addr=fc100000\0"					\
+	"ramdisk_addr=fc180000\0"					\
 	"load=tftp 100000 /tftpboot/yellowstone/u-boot.bin\0"		\
 	"update=protect off fff80000 ffffffff;era fff80000 ffffffff;"	\
 		"cp.b 100000 fff80000 80000;"			        \
diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h
index a67b834..a81cf34 100644
--- a/include/configs/yosemite.h
+++ b/include/configs/yosemite.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2005
+ * (C) Copyright 2005-2006
  * Stefan Roese, DENX Software Engineering, sr@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -109,6 +109,8 @@
 #define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
 #define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
+#define CFG_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
+
 #define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 
 #ifdef CFG_ENV_IS_IN_FLASH
@@ -174,7 +176,7 @@
 	"rootpath=/opt/eldk/ppc_4xx\0"					\
 	"bootfile=/tftpboot/yosemite/uImage\0"				\
 	"kernel_addr=fc000000\0"					\
-	"ramdisk_addr=fc100000\0"					\
+	"ramdisk_addr=fc180000\0"					\
 	"load=tftp 100000 /tftpboot/yosemite/u-boot.bin\0"		\
 	"update=protect off fff80000 ffffffff;era fff80000 ffffffff;"	\
 		"cp.b 100000 fff80000 80000;"			        \