summaryrefslogtreecommitdiff
path: root/include/configs
diff options
context:
space:
mode:
authorwdenk <wdenk>2004-10-10 21:27:30 +0000
committerwdenk <wdenk>2004-10-10 21:27:30 +0000
commit5c952cf0245421feb4644f2e71487c0b2e1dbd13 (patch)
tree47b80e839d339fe11dabd01ec8c89b46b791f797 /include/configs
parent03f5c55021c2d6297e66cc11bfea75f149a5d71c (diff)
downloadu-boot-imx-5c952cf0245421feb4644f2e71487c0b2e1dbd13.zip
u-boot-imx-5c952cf0245421feb4644f2e71487c0b2e1dbd13.tar.gz
u-boot-imx-5c952cf0245421feb4644f2e71487c0b2e1dbd13.tar.bz2
Patches by Scott McNutt, 24 Aug 2004:
- Add support for Altera Nios-II processors. - Add support for Psyent PCI-5441 board. - Add support for Psyent PK1C20 board.
Diffstat (limited to 'include/configs')
-rw-r--r--include/configs/MPC8541CDS.h12
-rw-r--r--include/configs/MPC8555CDS.h12
-rw-r--r--include/configs/PCI5441.h155
-rw-r--r--include/configs/PK1C20.h188
4 files changed, 343 insertions, 24 deletions
diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h
index 0b54db3..9824241 100644
--- a/include/configs/MPC8541CDS.h
+++ b/include/configs/MPC8541CDS.h
@@ -26,7 +26,6 @@
* Please refer to doc/README.mpc85xxcds for more info.
*
*/
-
#ifndef __CONFIG_H
#define __CONFIG_H
@@ -72,7 +71,6 @@ extern unsigned long get_clock_freq(void);
#define CFG_MEMTEST_START 0x00200000 /* memtest works on */
#define CFG_MEMTEST_END 0x00400000
-
/*
* Base addresses -- Note these are effective addresses where the
* actual resources get mapped (not physical addresses)
@@ -81,7 +79,6 @@ extern unsigned long get_clock_freq(void);
#define CFG_CCSRBAR 0xe0000000 /* relocated CCSRBAR */
#define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */
-
/*
* DDR Setup
*/
@@ -97,8 +94,6 @@ extern unsigned long get_clock_freq(void);
#error ("CONFIG_SPD_EEPROM is required by MPC85555CDS")
#endif
-
-
/*
* SDRAM on the Local Bus
*/
@@ -244,7 +239,6 @@ extern unsigned long get_clock_freq(void);
#define CFG_BR3_PRELIM 0xf8000801
#define CFG_OR3_PRELIM 0xfff00ff7
-
#define CONFIG_L1_INIT_RAM
#define CFG_INIT_RAM_LOCK 1
#define CFG_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */
@@ -344,8 +338,6 @@ extern unsigned long get_clock_freq(void);
#endif /* CONFIG_TSEC_ENET */
-
-
/*
* Environment
*/
@@ -369,8 +361,6 @@ extern unsigned long get_clock_freq(void);
| CFG_CMD_I2C \
| CFG_CMD_MII)
#endif
-
-
#include <cmd_confdefs.h>
#undef CONFIG_WATCHDOG /* watchdog disabled */
@@ -418,7 +408,6 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
-
/*
* Environment Configuration
*/
@@ -470,5 +459,4 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
-
#endif /* __CONFIG_H */
diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h
index 7343635..6b4191e 100644
--- a/include/configs/MPC8555CDS.h
+++ b/include/configs/MPC8555CDS.h
@@ -26,7 +26,6 @@
* Please refer to doc/README.mpc85xxcds for more info.
*
*/
-
#ifndef __CONFIG_H
#define __CONFIG_H
@@ -72,7 +71,6 @@ extern unsigned long get_clock_freq(void);
#define CFG_MEMTEST_START 0x00200000 /* memtest works on */
#define CFG_MEMTEST_END 0x00400000
-
/*
* Base addresses -- Note these are effective addresses where the
* actual resources get mapped (not physical addresses)
@@ -81,7 +79,6 @@ extern unsigned long get_clock_freq(void);
#define CFG_CCSRBAR 0xe0000000 /* relocated CCSRBAR */
#define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */
-
/*
* DDR Setup
*/
@@ -97,8 +94,6 @@ extern unsigned long get_clock_freq(void);
#error ("CONFIG_SPD_EEPROM is required by MPC85555CDS")
#endif
-
-
/*
* SDRAM on the Local Bus
*/
@@ -244,7 +239,6 @@ extern unsigned long get_clock_freq(void);
#define CFG_BR3_PRELIM 0xf8000801
#define CFG_OR3_PRELIM 0xfff00ff7
-
#define CONFIG_L1_INIT_RAM
#define CFG_INIT_RAM_LOCK 1
#define CFG_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */
@@ -344,8 +338,6 @@ extern unsigned long get_clock_freq(void);
#endif /* CONFIG_TSEC_ENET */
-
-
/*
* Environment
*/
@@ -369,8 +361,6 @@ extern unsigned long get_clock_freq(void);
| CFG_CMD_I2C \
| CFG_CMD_MII)
#endif
-
-
#include <cmd_confdefs.h>
#undef CONFIG_WATCHDOG /* watchdog disabled */
@@ -418,7 +408,6 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
-
/*
* Environment Configuration
*/
@@ -470,5 +459,4 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
-
#endif /* __CONFIG_H */
diff --git a/include/configs/PCI5441.h b/include/configs/PCI5441.h
new file mode 100644
index 0000000..3a7f7f0
--- /dev/null
+++ b/include/configs/PCI5441.h
@@ -0,0 +1,155 @@
+/*
+ * (C) Copyright 2004, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*------------------------------------------------------------------------
+ * BOARD/CPU
+ *----------------------------------------------------------------------*/
+#define CONFIG_PCI5441 1 /* PCI-5441 board */
+#define CONFIG_SYS_CLK_FREQ 50000000 /* 50 MHz core clk */
+
+#define CFG_RESET_ADDR 0x00000000 /* Hard-reset address */
+#define CFG_EXCEPTION_ADDR 0x01000020 /* Exception entry point*/
+#define CFG_NIOS_SYSID_BASE 0x00920828 /* System id address */
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* enable early board-spec. init*/
+
+/*------------------------------------------------------------------------
+ * CACHE -- the following will support II/s and II/f. The II/s does not
+ * have dcache, so the cache instructions will behave as NOPs.
+ *----------------------------------------------------------------------*/
+#define CFG_ICACHE_SIZE 4096 /* 4 KByte total */
+#define CFG_ICACHELINE_SIZE 32 /* 32 bytes/line */
+#define CFG_DCACHE_SIZE 2048 /* 2 KByte (II/f) */
+#define CFG_DCACHELINE_SIZE 4 /* 4 bytes/line (II/f) */
+
+/*------------------------------------------------------------------------
+ * MEMORY BASE ADDRESSES
+ *----------------------------------------------------------------------*/
+#define CFG_FLASH_BASE 0x00000000 /* FLASH base addr */
+#define CFG_FLASH_SIZE 0x00800000 /* 8 MByte */
+#define CFG_SDRAM_BASE 0x01000000 /* SDRAM base addr */
+#define CFG_SDRAM_SIZE 0x01000000 /* 16 MByte */
+
+/*------------------------------------------------------------------------
+ * MEMORY ORGANIZATION
+ * -Monitor at top.
+ * -The heap is placed below the monitor.
+ * -Global data is placed below the heap.
+ * -The stack is placed below global data (&grows down).
+ *----------------------------------------------------------------------*/
+#define CFG_MONITOR_LEN (128 * 1024) /* Reserve 128k */
+#define CFG_GBL_DATA_SIZE 128 /* Global data size rsvd*/
+#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
+
+#define CFG_MONITOR_BASE TEXT_BASE
+#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN)
+#define CFG_GBL_DATA_OFFSET (CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP CFG_GBL_DATA_OFFSET
+
+/*------------------------------------------------------------------------
+ * FLASH (AM29LV065D)
+ *----------------------------------------------------------------------*/
+#define CFG_MAX_FLASH_SECT 128 /* Max # sects per bank */
+#define CFG_MAX_FLASH_BANKS 1 /* Max # of flash banks */
+#define CFG_FLASH_ERASE_TOUT 8000 /* Erase timeout (msec) */
+#define CFG_FLASH_WRITE_TOUT 100 /* Write timeout (msec) */
+#define CFG_FLASH_WORD_SIZE unsigned char /* flash word size */
+
+/*------------------------------------------------------------------------
+ * ENVIRONMENT -- Put environment in sector CFG_MONITOR_LEN above
+ * CFG_RESET_ADDR, since we assume the monitor is stored at the
+ * reset address, no? This will keep the environment in user region
+ * of flash. NOTE: the monitor length must be multiple of sector size
+ * (which is common practice).
+ *----------------------------------------------------------------------*/
+#define CFG_ENV_IS_IN_FLASH 1 /* Environment in flash */
+#define CFG_ENV_SIZE (64 * 1024) /* 64 KByte (1 sector) */
+#define CONFIG_ENV_OVERWRITE /* Serial change Ok */
+#define CFG_ENV_ADDR (CFG_RESET_ADDR + CFG_MONITOR_LEN)
+
+/*------------------------------------------------------------------------
+ * CONSOLE
+ *----------------------------------------------------------------------*/
+#if defined(CONFIG_CONSOLE_JTAG)
+#define CFG_NIOS_CONSOLE 0x00920820 /* JTAG UART base addr */
+#else
+#define CFG_NIOS_CONSOLE 0x009208a0 /* UART base addr */
+#endif
+
+#define CFG_NIOS_FIXEDBAUD 1 /* Baudrate is fixed */
+#define CONFIG_BAUDRATE 115200 /* Initial baudrate */
+#define CFG_BAUDRATE_TABLE {115200} /* It's fixed ;-) */
+
+#define CFG_CONSOLE_INFO_QUIET 1 /* Suppress console info*/
+
+/*------------------------------------------------------------------------
+ * DEBUG
+ *----------------------------------------------------------------------*/
+#undef CONFIG_ROM_STUBS /* Stubs not in ROM */
+
+/*------------------------------------------------------------------------
+ * TIMEBASE --
+ *
+ * The high res timer defaults to 1 msec. Since it includes the period
+ * registers, we can slow it down to 10 msec using TMRCNT. If the default
+ * period is acceptable, TMRCNT can be left undefined.
+ *----------------------------------------------------------------------*/
+#define CFG_NIOS_TMRBASE 0x00920860 /* Tick timer base addr */
+#define CFG_NIOS_TMRIRQ 3 /* Timer IRQ num */
+#define CFG_NIOS_TMRMS 10 /* 10 msec per tick */
+#define CFG_NIOS_TMRCNT (CFG_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000))
+#define CFG_HZ (CONFIG_SYS_CLK_FREQ/(CFG_NIOS_TMRCNT + 1))
+
+/*------------------------------------------------------------------------
+ * COMMANDS
+ *----------------------------------------------------------------------*/
+#define CONFIG_COMMANDS (CFG_CMD_BDI | \
+ CFG_CMD_ECHO | \
+ CFG_CMD_ENV | \
+ CFG_CMD_FLASH | \
+ CFG_CMD_IMI | \
+ CFG_CMD_IRQ | \
+ CFG_CMD_LOADS | \
+ CFG_CMD_LOADB | \
+ CFG_CMD_MEMORY | \
+ CFG_CMD_MISC | \
+ CFG_CMD_RUN | \
+ CFG_CMD_SAVES )
+#include <cmd_confdefs.h>
+
+/*------------------------------------------------------------------------
+ * MISC
+ *----------------------------------------------------------------------*/
+#define CFG_LONGHELP /* Provide extended help*/
+#define CFG_PROMPT "==> " /* Command prompt */
+#define CFG_CBSIZE 256 /* Console I/O buf size */
+#define CFG_MAXARGS 16 /* Max command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot arg buf size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print buf size */
+#define CFG_LOAD_ADDR CFG_SDRAM_BASE /* Default load address */
+#define CFG_MEMTEST_START CFG_SDRAM_BASE /* Start addr for test */
+#define CFG_MEMTEST_END CFG_INIT_SP - 0x00020000
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/PK1C20.h b/include/configs/PK1C20.h
new file mode 100644
index 0000000..865c69b
--- /dev/null
+++ b/include/configs/PK1C20.h
@@ -0,0 +1,188 @@
+/*
+ * (C) Copyright 2004, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*------------------------------------------------------------------------
+ * BOARD/CPU
+ *----------------------------------------------------------------------*/
+#define CONFIG_PK1C20 1 /* PK1C20 board */
+#define CONFIG_SYS_CLK_FREQ 50000000 /* 50 MHz core clk */
+
+#define CFG_RESET_ADDR 0x00000000 /* Hard-reset address */
+#define CFG_EXCEPTION_ADDR 0x01000020 /* Exception entry point*/
+#define CFG_NIOS_SYSID_BASE 0x00920828 /* System id address */
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* enable early board-spec. init*/
+
+/*------------------------------------------------------------------------
+ * CACHE -- the following will support II/s and II/f. The II/s does not
+ * have dcache, so the cache instructions will behave as NOPs.
+ *----------------------------------------------------------------------*/
+#define CFG_ICACHE_SIZE 4096 /* 4 KByte total */
+#define CFG_ICACHELINE_SIZE 32 /* 32 bytes/line */
+#define CFG_DCACHE_SIZE 2048 /* 2 KByte (II/f) */
+#define CFG_DCACHELINE_SIZE 4 /* 4 bytes/line (II/f) */
+
+/*------------------------------------------------------------------------
+ * MEMORY BASE ADDRESSES
+ *----------------------------------------------------------------------*/
+#define CFG_FLASH_BASE 0x00000000 /* FLASH base addr */
+#define CFG_FLASH_SIZE 0x00800000 /* 8 MByte */
+#define CFG_SDRAM_BASE 0x01000000 /* SDRAM base addr */
+#define CFG_SDRAM_SIZE 0x01000000 /* 16 MByte */
+#define CFG_SRAM_BASE 0x00800000 /* SRAM base addr */
+#define CFG_SRAM_SIZE 0x00200000 /* 2 MByte */
+
+/*------------------------------------------------------------------------
+ * MEMORY ORGANIZATION
+ * -Monitor at top.
+ * -The heap is placed below the monitor.
+ * -Global data is placed below the heap.
+ * -The stack is placed below global data (&grows down).
+ *----------------------------------------------------------------------*/
+#define CFG_MONITOR_LEN (128 * 1024) /* Reserve 128k */
+#define CFG_GBL_DATA_SIZE 128 /* Global data size rsvd*/
+#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
+
+#define CFG_MONITOR_BASE TEXT_BASE
+#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN)
+#define CFG_GBL_DATA_OFFSET (CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP CFG_GBL_DATA_OFFSET
+
+/*------------------------------------------------------------------------
+ * FLASH (AM29LV065D)
+ *----------------------------------------------------------------------*/
+#define CFG_MAX_FLASH_SECT 128 /* Max # sects per bank */
+#define CFG_MAX_FLASH_BANKS 1 /* Max # of flash banks */
+#define CFG_FLASH_ERASE_TOUT 8000 /* Erase timeout (msec) */
+#define CFG_FLASH_WRITE_TOUT 100 /* Write timeout (msec) */
+#define CFG_FLASH_WORD_SIZE unsigned char /* flash word size */
+
+/*------------------------------------------------------------------------
+ * ENVIRONMENT -- Put environment in sector CFG_MONITOR_LEN above
+ * CFG_RESET_ADDR, since we assume the monitor is stored at the
+ * reset address, no? This will keep the environment in user region
+ * of flash. NOTE: the monitor length must be multiple of sector size
+ * (which is common practice).
+ *----------------------------------------------------------------------*/
+#define CFG_ENV_IS_IN_FLASH 1 /* Environment in flash */
+#define CFG_ENV_SIZE (64 * 1024) /* 64 KByte (1 sector) */
+#define CONFIG_ENV_OVERWRITE /* Serial change Ok */
+#define CFG_ENV_ADDR (CFG_RESET_ADDR + CFG_MONITOR_LEN)
+
+/*------------------------------------------------------------------------
+ * CONSOLE
+ *----------------------------------------------------------------------*/
+#if defined(CONFIG_CONSOLE_JTAG)
+#define CFG_NIOS_CONSOLE 0x00920820 /* JTAG UART base addr */
+#else
+#define CFG_NIOS_CONSOLE 0x009208a0 /* UART base addr */
+#endif
+
+#define CFG_NIOS_FIXEDBAUD 1 /* Baudrate is fixed */
+#define CONFIG_BAUDRATE 115200 /* Initial baudrate */
+#define CFG_BAUDRATE_TABLE {115200} /* It's fixed ;-) */
+
+#define CFG_CONSOLE_INFO_QUIET 1 /* Suppress console info*/
+
+/*------------------------------------------------------------------------
+ * DEBUG
+ *----------------------------------------------------------------------*/
+#undef CONFIG_ROM_STUBS /* Stubs not in ROM */
+
+/*------------------------------------------------------------------------
+ * TIMEBASE --
+ *
+ * The high res timer defaults to 1 msec. Since it includes the period
+ * registers, we can slow it down to 10 msec using TMRCNT. If the default
+ * period is acceptable, TMRCNT can be left undefined.
+ *----------------------------------------------------------------------*/
+#define CFG_NIOS_TMRBASE 0x00920860 /* Tick timer base addr */
+#define CFG_NIOS_TMRIRQ 3 /* Timer IRQ num */
+#define CFG_NIOS_TMRMS 10 /* 10 msec per tick */
+#define CFG_NIOS_TMRCNT (CFG_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000))
+#define CFG_HZ (CONFIG_SYS_CLK_FREQ/(CFG_NIOS_TMRCNT + 1))
+
+/*------------------------------------------------------------------------
+ * STATUS LED -- Provides a simple blinking led. For Nios2 each board
+ * must implement its own led routines -- leds are, after all,
+ * board-specific, no?
+ *----------------------------------------------------------------------*/
+#define CFG_LEDPIO_ADDR 0x00920840 /* LED PIO base addr */
+#define CONFIG_STATUS_LED /* Enable status driver */
+
+#define STATUS_LED_BIT 1 /* Bit-0 on PIO */
+#define STATUS_LED_STATE 1 /* Blinking */
+#define STATUS_LED_PERIOD (500/CFG_NIOS_TMRMS) /* Every 500 msec */
+
+/*------------------------------------------------------------------------
+ * ETHERNET -- The header file for the SMC91111 driver hurts my eyes ...
+ * and really doesn't need any additional clutter. So I choose the lazy
+ * way out to avoid changes there -- define the base address to ensure
+ * cache bypass so there's no need to monkey with inx/outx macros.
+ *----------------------------------------------------------------------*/
+#define CONFIG_SMC91111_BASE 0x80910300 /* Base addr (bypass) */
+#define CONFIG_DRIVER_SMC91111 /* Using SMC91c111 */
+#undef CONFIG_SMC91111_EXT_PHY /* Internal PHY */
+#define CONFIG_SMC_USE_32_BIT /* 32-bit interface */
+
+#define CONFIG_ETHADDR 08:00:3e:26:0a:5b
+#define CONFIG_NETMASK 255.255.255.0
+#define CONFIG_IPADDR 192.168.2.21
+#define CONFIG_SERVERIP 192.168.2.16
+
+/*------------------------------------------------------------------------
+ * COMMANDS
+ *----------------------------------------------------------------------*/
+#define CONFIG_COMMANDS (CFG_CMD_BDI | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_ECHO | \
+ CFG_CMD_ENV | \
+ CFG_CMD_FLASH | \
+ CFG_CMD_IMI | \
+ CFG_CMD_IRQ | \
+ CFG_CMD_LOADS | \
+ CFG_CMD_LOADB | \
+ CFG_CMD_MEMORY | \
+ CFG_CMD_MISC | \
+ CFG_CMD_NET | \
+ CFG_CMD_PING | \
+ CFG_CMD_RUN | \
+ CFG_CMD_SAVES )
+#include <cmd_confdefs.h>
+
+/*------------------------------------------------------------------------
+ * MISC
+ *----------------------------------------------------------------------*/
+#define CFG_LONGHELP /* Provide extended help*/
+#define CFG_PROMPT "==> " /* Command prompt */
+#define CFG_CBSIZE 256 /* Console I/O buf size */
+#define CFG_MAXARGS 16 /* Max command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot arg buf size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print buf size */
+#define CFG_LOAD_ADDR CFG_SDRAM_BASE /* Default load address */
+#define CFG_MEMTEST_START CFG_SDRAM_BASE /* Start addr for test */
+#define CFG_MEMTEST_END CFG_INIT_SP - 0x00020000
+
+#endif /* __CONFIG_H */