summaryrefslogtreecommitdiff
path: root/include/configs
diff options
context:
space:
mode:
authorwdenk <wdenk>2003-06-16 23:50:08 +0000
committerwdenk <wdenk>2003-06-16 23:50:08 +0000
commit2abbe0754759f94c79125a2534fbc4be74f416bc (patch)
tree98c52ea3bade5efef565044ede183d6c2b30629b /include/configs
parent71f9511803de65a3b98d2f592d418da1d1539f13 (diff)
downloadu-boot-imx-2abbe0754759f94c79125a2534fbc4be74f416bc.zip
u-boot-imx-2abbe0754759f94c79125a2534fbc4be74f416bc.tar.gz
u-boot-imx-2abbe0754759f94c79125a2534fbc4be74f416bc.tar.bz2
* Patch by Nicolas Lacressonniere, 11 Jun 2003:
Modifications for Atmel AT91RM9200DK ARM920T based development kit - Add Atmel DataFlash support for reading and writing. - Add possibility to boot a Linux from DataFlash with BOOTM command. - Add Flash detection on Atmel AT91RM9200DK (between Atmel AT49BV1614 and AT49BV1614A flashes) - Replace old Ethernet PHY layer functions - Change link address * Patch by Frank Smith, 9 Jun 2003: use CRIT_EXCEPTION for machine check on 4xx * Patch by Detlev Zundel, 13 Jun 2003: added implementation of the "carinfo" command in cmd_immap.c
Diffstat (limited to 'include/configs')
-rw-r--r--include/configs/at91rm9200dk.h45
1 files changed, 29 insertions, 16 deletions
diff --git a/include/configs/at91rm9200dk.h b/include/configs/at91rm9200dk.h
index 6315f0a..e382977 100644
--- a/include/configs/at91rm9200dk.h
+++ b/include/configs/at91rm9200dk.h
@@ -28,12 +28,14 @@
/* ARM asynchronous clock */
#define AT91C_MAIN_CLOCK 179712000 /* from 18.432 MHz crystal (18432000 / 4 * 39) */
#define AT91C_MASTER_CLOCK 59904000 /* peripheral clock (AT91C_MASTER_CLOCK / 3) */
+/* #define AT91C_MASTER_CLOCK 44928000 */ /* peripheral clock (AT91C_MASTER_CLOCK / 4) */
-#define CONFIG_AT91RM9200DK 1 /* on an AT91RM9200DK Board */
+#define CONFIG_AT91RM9200DK 1 /* on an AT91RM9200DK Board */
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS 1
#define CONFIG_INITRD_TAG 1
+
/*
* Size of malloc() pool
*/
@@ -43,24 +45,23 @@
* Hardware drivers
*/
-/*
- * select serial console configuration
- */
-#define CONFIG_SERIAL3 1 /* we use SERIAL 3 */
-
#undef CONFIG_HWFLOW /* don't include RTS/CTS flow control support */
#undef CONFIG_MODEM_SUPPORT /* disable modem initialization stuff */
+#define CONFIG_BOOTDELAY 3
+/* #define CONFIG_ENV_OVERWRITE 1 */
+
#define CONFIG_COMMANDS \
- (CONFIG_CMD_DFL | \
- CFG_CMD_DHCP | \
- CFG_CMD_NAND )
-/* CFG_CMD_EEPROM | \ might consider these
- CFG_CMD_I2C | \
- CFG_CMD_USB | \
- CFG_CMD_MII | \
- CFG_CMD_SDRAM | \ */
+ ((CONFIG_CMD_DFL | \
+ CFG_CMD_DHCP ) & \
+ ~(CFG_CMD_BDI | \
+ CFG_CMD_IMI | \
+ CFG_CMD_AUTOSCRIPT | \
+ CFG_CMD_FPGA | \
+ CFG_CMD_MISC | \
+ CFG_CMD_LOADS ))
+
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
@@ -101,6 +102,14 @@
#define CFG_MEMTEST_END CFG_MEMTEST_START + PHYS_SDRAM_SIZE - 262144
#define CONFIG_DRIVER_ETHER
+#define CONFIG_NET_RETRY_COUNT 20
+
+#define CONFIG_HAS_DATAFLASH 1
+#define CFG_SPI_WRITE_TOUT CFG_HZ
+#define CFG_MAX_DATAFLASH_BANKS 2
+#define CFG_MAX_DATAFLASH_PAGES 16384
+#define CFG_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* Logical adress for CS0 */
+#define CFG_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 /* Logical adress for CS3 */
#define PHYS_FLASH_1 0x10000000
#define PHYS_FLASH_SIZE 0x200000 /* 2 megs main flash */
@@ -110,10 +119,14 @@
#define CFG_FLASH_ERASE_TOUT (2*CFG_HZ) /* Timeout for Flash Erase */
#define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* Timeout for Flash Write */
#define CFG_ENV_IS_IN_FLASH 1
-#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0xe000)
-#define CFG_ENV_SIZE 0x2000
+#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0xe000) /* 0x10000 */
+#define CFG_ENV_SIZE 0x2000 /* 0x8000 */
#define CFG_LOAD_ADDR 0x21000000 /* default load address */
+#define CFG_BOOT_SIZE 0x6000 /* 24 KBytes */
+#define CFG_U_BOOT_BASE (PHYS_FLASH_1 + 0x10000)
+#define CFG_U_BOOT_SIZE 0x10000 /* 64 KBytes */
+
#define CFG_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
#define CFG_PROMPT "Uboot> " /* Monitor Command Prompt */