Merge branch 'master' of git://git.denx.de/u-boot-arm

13 files changed, 344 insertions, 25 deletions

diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h
index ccfda71..341b21d 100644
--- a/include/configs/at91sam9m10g45ek.h
+++ b/include/configs/at91sam9m10g45ek.h
@@ -22,7 +22,6 @@
 #define CONFIG_SYS_AT91_MAIN_CLOCK      12000000 /* from 12 MHz crystal */
 
 #define CONFIG_AT91SAM9M10G45EK
-#define CONFIG_AT91FAMILY
 
 #define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs	*/
 #define CONFIG_SETUP_MEMORY_TAGS
@@ -34,6 +33,8 @@
 #define CONFIG_CMD_BOOTZ
 #define CONFIG_OF_LIBFDT
 
+#define CONFIG_SYS_GENERIC_BOARD
+
 /* general purpose I/O */
 #define CONFIG_ATMEL_LEGACY		/* required until (g)pio is fixed */
 #define CONFIG_AT91_GPIO
@@ -115,6 +116,20 @@
 
 #endif
 
+/* MMC */
+#define CONFIG_CMD_MMC
+
+#ifdef CONFIG_CMD_MMC
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_GENERIC_ATMEL_MCI
+#endif
+
+#if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC)
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+#endif
+
 /* Ethernet */
 #define CONFIG_MACB
 #define CONFIG_RMII
@@ -126,7 +141,6 @@
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_ATMEL
 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	2
-#define CONFIG_DOS_PARTITION
 #define CONFIG_USB_STORAGE
 
 #define CONFIG_SYS_LOAD_ADDR		0x22000000	/* load address */
@@ -134,6 +148,7 @@
 #define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
 #define CONFIG_SYS_MEMTEST_END		0x23e00000
 
+#ifdef CONFIG_SYS_USE_NANDFLASH
 /* bootstrap + u-boot + env in nandflash */
 #define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_OFFSET		0xc0000
@@ -149,6 +164,24 @@
 	"256k(env),256k(env_redundant),256k(spare),"			\
 	"512k(dtb),6M(kernel)ro,-(rootfs) "				\
 	"root=/dev/mtdblock7 rw rootfstype=jffs2"
+#elif CONFIG_SYS_USE_MMC
+/* bootstrap + u-boot + env + linux in mmc */
+#define FAT_ENV_INTERFACE	"mmc"
+#define FAT_ENV_DEVICE		0
+#define FAT_ENV_PART		1
+#define FAT_ENV_FILE		"uboot.env"
+#define CONFIG_ENV_IS_IN_FAT
+#define CONFIG_FAT_WRITE
+#define CONFIG_ENV_SIZE		0x4000
+
+#define CONFIG_BOOTARGS		"console=ttyS0,115200 " \
+				"mtdparts=atmel_nand:" \
+				"8M(bootstrap/uboot/kernel)ro,-(rootfs) " \
+				"root=/dev/mmcblk0p2 rw rootwait"
+#define CONFIG_BOOTCOMMAND	"fatload mmc 0:1 0x71000000 dtb; " \
+				"fatload mmc 0:1 0x72000000 zImage; " \
+				"bootz 0x72000000 - 0x71000000"
+#endif
 
 #define CONFIG_BAUDRATE			115200
 
diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h
index e23549d..9b0e588 100644
--- a/include/configs/at91sam9n12ek.h
+++ b/include/configs/at91sam9n12ek.h
@@ -18,9 +18,6 @@
 
 #define CONFIG_SYS_TEXT_BASE		0x26f00000
 
-#define CONFIG_ARM926EJS
-#define CONFIG_AT91FAMILY
-
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768		/* slow clock xtal */
 #define CONFIG_SYS_AT91_MAIN_CLOCK	16000000	/* main clock xtal */
diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h
index f0a6757..b1d4baa 100644
--- a/include/configs/at91sam9x5ek.h
+++ b/include/configs/at91sam9x5ek.h
@@ -18,7 +18,6 @@
 #define CONFIG_SYS_AT91_MAIN_CLOCK	12000000	/* 12 MHz crystal */
 
 #define CONFIG_AT91SAM9X5EK
-#define CONFIG_AT91FAMILY
 
 #define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
 #define CONFIG_SETUP_MEMORY_TAGS
@@ -30,6 +29,8 @@
 #define CONFIG_CMD_BOOTZ
 #define CONFIG_OF_LIBFDT
 
+#define CONFIG_SYS_GENERIC_BOARD
+
 /* general purpose I/O */
 #define CONFIG_ATMEL_LEGACY		/* required until (g)pio is fixed */
 #define CONFIG_AT91_GPIO
diff --git a/include/configs/corvus.h b/include/configs/corvus.h
index 959e188..6171060 100644
--- a/include/configs/corvus.h
+++ b/include/configs/corvus.h
@@ -27,15 +27,12 @@
 
 #define CONFIG_SYS_TEXT_BASE  0x73f00000
 
-#define CONFIG_AT91_LEGACY
 #define CONFIG_ATMEL_LEGACY		/* required until (g)pio is fixed */
 
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_SLOW_CLOCK      32768
 #define CONFIG_SYS_AT91_MAIN_CLOCK      12000000 /* from 12 MHz crystal */
 
-#define CONFIG_AT91FAMILY
-
 #define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs	*/
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
diff --git a/include/configs/cpu9260.h b/include/configs/cpu9260.h
index 39f7062..1feaefd 100644
--- a/include/configs/cpu9260.h
+++ b/include/configs/cpu9260.h
@@ -32,7 +32,6 @@
 
 #include <asm/arch/hardware.h>
 
-#define CONFIG_AT91FAMILY
 #define CONFIG_ARCH_CPU_INIT
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_BOARD_EARLY_INIT_F
diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h
index 480d867..c81fc44 100644
--- a/include/configs/ethernut5.h
+++ b/include/configs/ethernut5.h
@@ -23,8 +23,6 @@
 #define CONFIG_MACH_TYPE MACH_TYPE_ETHERNUT5
 
 /* CPU information */
-#define CONFIG_ARM926EJS
-#define CONFIG_AT91FAMILY
 #define CONFIG_DISPLAY_CPUINFO		/* Display at console. */
 #define CONFIG_ARCH_CPU_INIT
 
diff --git a/include/configs/highbank.h b/include/configs/highbank.h
index a6202cf..da1c837 100644
--- a/include/configs/highbank.h
+++ b/include/configs/highbank.h
@@ -13,6 +13,7 @@
 #define CONFIG_SYS_THUMB_BUILD
 
 #define CONFIG_SYS_NO_FLASH
+#define CONFIG_SYS_GENERIC_BOARD
 
 #define CONFIG_OF_BOARD_SETUP
 #define CONFIG_FIT
diff --git a/include/configs/lsxl.h b/include/configs/lsxl.h
index 96a889f..f5f4961 100644
--- a/include/configs/lsxl.h
+++ b/include/configs/lsxl.h
@@ -66,6 +66,7 @@
 #define CONFIG_CMD_SF
 #define CONFIG_CMD_SPI
 #define CONFIG_CMD_USB
+#define CONFIG_CMD_FS_GENERIC
 
 #define CONFIG_DOS_PARTITION
 #define CONFIG_EFI_PARTITION
@@ -109,20 +110,41 @@
 #define CONFIG_LOADADDR		0x00800000
 #define CONFIG_BOOTCOMMAND	"run bootcmd_${bootsource}"
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 root=/dev/sda2"
+
+#if defined(CONFIG_LSXHL)
+#define CONFIG_FDTFILE "kirkwood-lsxhl.dtb"
+#elif defined(CONFIG_LSCHLV2)
+#define CONFIG_FDTFILE "kirkwood-lschlv2.dtb"
+#else
+#error "Unsupported board"
+#endif
+
 #define CONFIG_EXTRA_ENV_SETTINGS					\
-	"bootsource=hdd\0"						\
+	"bootsource=legacy\0"						\
 	"hdpart=0:1\0"							\
-	"bootcmd_net=bootp 0x00100000 uImage "				\
-		"&& tftpboot 0x00800000 uInitrd "			\
+	"kernel_addr=0x00800000\0"					\
+	"ramdisk_addr=0x01000000\0"					\
+	"fdt_addr=0x01ff0000\0"						\
+	"bootcmd_legacy=ide reset "					\
+		"&& load ide ${hdpart} 0x00100000 /uImage.buffalo "	\
+		"&& load ide ${hdpart} 0x00800000 /initrd.buffalo "	\
 		"&& bootm 0x00100000 0x00800000\0"			\
+	"bootcmd_net=bootp ${kernel_addr} uImage "			\
+		"&& tftpboot ${ramdisk_addr} uInitrd "			\
+		"&& tftpboot ${fdt_addr} " CONFIG_FDTFILE " "		\
+		"&& bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0"	\
 	"bootcmd_hdd=ide reset "					\
-		"&& ext2load ide ${hdpart} 0x00100000 /uImage "		\
-		"&& ext2load ide ${hdpart} 0x00800000 /uInitrd "	\
-		"&& bootm 0x00100000 0x00800000\0"			\
+		"&& load ide ${hdpart} ${kernel_addr} /uImage "		\
+		"&& load ide ${hdpart} ${ramdisk_addr} /uInitrd "	\
+		"&& load ide ${hdpart} ${fdt_addr} "			\
+			"/" CONFIG_FDTFILE " "				\
+		"&& bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0"	\
 	"bootcmd_usb=usb start "					\
-		"&& fatload usb 0:1 0x00100000 /uImage "		\
-		"&& fatload usb 0:1 0x00800000 /uInitrd "		\
-		"&& bootm 0x00100000 0x00800000\0"			\
+		"&& load usb 0:1 ${kernel_addr} /uImage "		\
+		"&& load usb 0:1 ${ramdisk_addr} /uInitrd "		\
+		"&& load usb 0:1 ${fdt_addr} "				\
+			"/" CONFIG_FDTFILE " "				\
+		"&& bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0"	\
 	"bootcmd_rescue=run config_nc_dhcp; run nc\0"			\
 	"eraseenv=sf probe 0 "						\
 		"&& sf erase " __stringify(CONFIG_ENV_OFFSET)		\
@@ -161,6 +183,7 @@
 #undef CONFIG_SYS_IDE_MAXDEVICE
 #define CONFIG_SYS_IDE_MAXDEVICE	1
 #define CONFIG_SYS_ATA_IDE0_OFFSET	MV_SATA_PORT0_OFFSET
+#define CONFIG_SYS_64BIT_LBA
 #endif
 
 #endif /* _CONFIG_LSXL_H */
diff --git a/include/configs/sama5d3_xplained.h b/include/configs/sama5d3_xplained.h
index 41c946d..f72ab0b 100644
--- a/include/configs/sama5d3_xplained.h
+++ b/include/configs/sama5d3_xplained.h
@@ -18,15 +18,20 @@
 #define CONFIG_SYS_AT91_SLOW_CLOCK      32768
 #define CONFIG_SYS_AT91_MAIN_CLOCK      12000000 /* from 12 MHz crystal */
 
-#define CONFIG_AT91FAMILY
 #define CONFIG_ARCH_CPU_INIT
+
+#ifndef CONFIG_SPL_BUILD
 #define CONFIG_SKIP_LOWLEVEL_INIT
+#endif
+
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_DISPLAY_CPUINFO
 
 #define CONFIG_CMD_BOOTZ
 #define CONFIG_OF_LIBFDT		/* Device Tree support */
 
+#define CONFIG_SYS_GENERIC_BOARD
+
 /* general purpose I/O */
 #define CONFIG_AT91_GPIO
 
@@ -74,8 +79,12 @@
 #define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_DDRCS
 #define CONFIG_SYS_SDRAM_SIZE		0x10000000
 
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SYS_INIT_SP_ADDR		0x310000
+#else
 #define CONFIG_SYS_INIT_SP_ADDR \
 	(CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
+#endif
 
 /* NAND flash */
 #define CONFIG_CMD_NAND
@@ -199,4 +208,46 @@
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(4 * 1024 * 1024)
 
+/* SPL */
+#define CONFIG_SPL
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_TEXT_BASE		0x300000
+#define CONFIG_SPL_MAX_SIZE		0x10000
+#define CONFIG_SPL_BSS_START_ADDR	0x20000000
+#define CONFIG_SPL_BSS_MAX_SIZE		0x80000
+#define CONFIG_SYS_SPL_MALLOC_START	0x20080000
+#define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000
+
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_GPIO_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+
+#define CONFIG_SPL_BOARD_INIT
+#define CONFIG_SYS_MONITOR_LEN		(512 << 10)
+
+#ifdef CONFIG_SYS_USE_MMC
+#define CONFIG_SPL_LDSCRIPT		arch/arm/cpu/at91-common/u-boot-spl.lds
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x400
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
+#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION	1
+#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME	"u-boot.img"
+#define CONFIG_SPL_FAT_SUPPORT
+#define CONFIG_SPL_LIBDISK_SUPPORT
+
+#elif CONFIG_SYS_USE_NANDFLASH
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_DRIVERS
+#define CONFIG_SPL_NAND_BASE
+#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x40000
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+#define CONFIG_SYS_NAND_PAGE_SIZE	0x800
+#define CONFIG_SYS_NAND_PAGE_COUNT	64
+#define CONFIG_SYS_NAND_OOBSIZE		64
+#define CONFIG_SYS_NAND_BLOCK_SIZE	0x20000
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS	0x0
+
+#endif
+
 #endif
diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h
index 516be85..da27180 100644
--- a/include/configs/sama5d3xek.h
+++ b/include/configs/sama5d3xek.h
@@ -21,7 +21,6 @@
 #define CONFIG_SYS_AT91_SLOW_CLOCK      32768
 #define CONFIG_SYS_AT91_MAIN_CLOCK      12000000 /* from 12 MHz crystal */
 
-#define CONFIG_AT91FAMILY
 #define CONFIG_ARCH_CPU_INIT
 
 #ifndef CONFIG_SPL_BUILD
@@ -34,6 +33,8 @@
 #define CONFIG_CMD_BOOTZ
 #define CONFIG_OF_LIBFDT		/* Device Tree support */
 
+#define CONFIG_SYS_GENERIC_BOARD
+
 /* general purpose I/O */
 #define CONFIG_AT91_GPIO
 
@@ -281,6 +282,7 @@
 #define CONFIG_SYS_NAND_OOBSIZE		64
 #define CONFIG_SYS_NAND_BLOCK_SIZE	0x20000
 #define CONFIG_SYS_NAND_BAD_BLOCK_POS	0x0
+#define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER
 
 #elif CONFIG_SYS_USE_SERIALFLASH
 #define CONFIG_SPL_SPI_SUPPORT
diff --git a/include/configs/sun7i.h b/include/configs/sun7i.h
new file mode 100644
index 0000000..9b693f7
--- /dev/null
+++ b/include/configs/sun7i.h
@@ -0,0 +1,24 @@
+/*
+ * (C) Copyright 2012-2013 Henrik Nordstrom <henrik@henriknordstrom.net>
+ * (C) Copyright 2013 Luke Kenneth Casson Leighton <lkcl@lkcl.net>
+ *
+ * Configuration settings for the Allwinner A20 (sun7i) CPU
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * A20 specific configuration
+ */
+#define CONFIG_SUN7I		/* sun7i SoC generation */
+
+#define CONFIG_SYS_PROMPT		"sun7i# "
+
+/*
+ * Include common sunxi configuration where most the settings are
+ */
+#include <configs/sunxi-common.h>
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
new file mode 100644
index 0000000..5d72d62
--- /dev/null
+++ b/include/configs/sunxi-common.h
@@ -0,0 +1,195 @@
+/*
+ * (C) Copyright 2012-2012 Henrik Nordstrom <henrik@henriknordstrom.net>
+ *
+ * (C) Copyright 2007-2011
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * Configuration settings for the Allwinner sunxi series of boards.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _SUNXI_COMMON_CONFIG_H
+#define _SUNXI_COMMON_CONFIG_H
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_SUNXI		/* sunxi family */
+#ifdef CONFIG_SPL_BUILD
+#ifndef CONFIG_SPL_FEL
+#define CONFIG_SYS_THUMB_BUILD	/* Thumbs mode to save space in SPL */
+#endif
+#endif
+
+#include <asm/arch/cpu.h>	/* get chip and board defs */
+
+#define CONFIG_SYS_TEXT_BASE		0x4a000000
+
+/*
+ * Display CPU information
+ */
+#define CONFIG_DISPLAY_CPUINFO
+
+/* Serial & console */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+/* ns16550 reg in the low bits of cpu reg */
+#define CONFIG_SYS_NS16550_REG_SIZE	-4
+#define CONFIG_SYS_NS16550_CLK		24000000
+#define CONFIG_SYS_NS16550_COM1		SUNXI_UART0_BASE
+#define CONFIG_SYS_NS16550_COM2		SUNXI_UART1_BASE
+#define CONFIG_SYS_NS16550_COM3		SUNXI_UART2_BASE
+#define CONFIG_SYS_NS16550_COM4		SUNXI_UART3_BASE
+
+/* DRAM Base */
+#define CONFIG_SYS_SDRAM_BASE		0x40000000
+#define CONFIG_SYS_INIT_RAM_ADDR	0x0
+#define CONFIG_SYS_INIT_RAM_SIZE	0x8000	/* 32 KiB */
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+#define CONFIG_NR_DRAM_BANKS		1
+#define PHYS_SDRAM_0			CONFIG_SYS_SDRAM_BASE
+#define PHYS_SDRAM_0_SIZE		0x80000000 /* 2 GiB */
+
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_SETEXPR
+
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_INITRD_TAG
+
+/* mmc config */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_CMD_MMC
+#define CONFIG_MMC_SUNXI
+#define CONFIG_MMC_SUNXI_SLOT		0
+#define CONFIG_MMC_SUNXI_USE_DMA
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV		0	/* first detected MMC controller */
+
+/* 4MB of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (4 << 20))
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_CMD_ECHO
+#define CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE	384	/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16	/* max number of command args */
+#define CONFIG_SYS_GENERIC_BOARD
+
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
+
+#define CONFIG_SYS_LOAD_ADDR		0x48000000 /* default load address */
+
+/* standalone support */
+#define CONFIG_STANDALONE_LOAD_ADDR	0x48000000
+
+#define CONFIG_SYS_HZ			1000
+
+/* baudrate */
+#define CONFIG_BAUDRATE			115200
+
+/* The stack sizes are set up in start.S using the settings below */
+#define CONFIG_STACKSIZE		(256 << 10)	/* 256 KiB */
+
+/* FLASH and environment organization */
+
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_SYS_MONITOR_LEN		(512 << 10)	/* 512 KiB */
+#define CONFIG_IDENT_STRING		" Allwinner Technology"
+
+#define CONFIG_ENV_OFFSET		(544 << 10) /* (8 + 24 + 512) KiB */
+#define CONFIG_ENV_SIZE			(128 << 10)	/* 128 KiB */
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"bootm_size=0x10000000\0"
+
+#define CONFIG_SYS_BOOT_GET_CMDLINE
+
+#include <config_cmd_default.h>
+
+#define CONFIG_FAT_WRITE	/* enable write access */
+
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+
+#ifdef CONFIG_SPL_FEL
+
+#define CONFIG_SPL
+#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds"
+#define CONFIG_SPL_START_S_PATH "arch/arm/cpu/armv7/sunxi"
+#define CONFIG_SPL_TEXT_BASE		0x2000
+#define CONFIG_SPL_MAX_SIZE		0x4000		/* 16 KiB */
+
+#else /* CONFIG_SPL */
+
+#define CONFIG_SPL_BSS_START_ADDR	0x4ff80000
+#define CONFIG_SPL_BSS_MAX_SIZE		0x80000		/* 512 KiB */
+
+#define CONFIG_SPL_TEXT_BASE		0x20		/* sram start+header */
+#define CONFIG_SPL_MAX_SIZE		0x5fe0		/* 24KB on sun4i/sun7i */
+
+#define CONFIG_SPL_LIBDISK_SUPPORT
+#define CONFIG_SPL_MMC_SUPPORT
+
+#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/sunxi/u-boot-spl.lds"
+
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	80	/* 40KiB */
+#define CONFIG_SPL_PAD_TO		32768		/* decimal for 'dd' */
+
+#endif /* CONFIG_SPL */
+
+/* end of 32 KiB in sram */
+#define LOW_LEVEL_SRAM_STACK		0x00008000 /* End of sram */
+#define CONFIG_SPL_STACK		LOW_LEVEL_SRAM_STACK
+#define CONFIG_SYS_SPL_MALLOC_START	0x4ff00000
+#define CONFIG_SYS_SPL_MALLOC_SIZE	0x00080000	/* 512 KiB */
+
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
+
+#define CONFIG_CONS_INDEX              1       /* UART0 */
+
+#ifdef CONFIG_SUNXI_GMAC
+#define CONFIG_DESIGNWARE_ETH		/* GMAC can use designware driver */
+#define CONFIG_DW_AUTONEG
+#define CONFIG_PHY_GIGE			/* GMAC can use gigabit PHY	*/
+#define CONFIG_PHY_ADDR		1
+#define CONFIG_MII			/* MII PHY management		*/
+#define CONFIG_PHYLIB
+#endif
+
+#ifdef CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_DNS
+#define CONFIG_NETCONSOLE
+#define CONFIG_BOOTP_DNS2
+#define CONFIG_BOOTP_SEND_HOSTNAME
+#endif
+
+#if !defined CONFIG_ENV_IS_IN_MMC && \
+    !defined CONFIG_ENV_IS_IN_NAND && \
+    !defined CONFIG_ENV_IS_IN_FAT && \
+    !defined CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_IS_NOWHERE
+#endif
+
+#ifndef CONFIG_SPL_BUILD
+#include <config_distro_defaults.h>
+#endif
+
+#endif /* _SUNXI_COMMON_CONFIG_H */
diff --git a/include/configs/vl_ma2sc.h b/include/configs/vl_ma2sc.h
index 14c6e67..bef821f 100644
--- a/include/configs/vl_ma2sc.h
+++ b/include/configs/vl_ma2sc.h
@@ -13,8 +13,6 @@
 
 /*--------------------------------------------------------------------------*/
 
-#define CONFIG_ARM926EJS		/* This is an ARM926EJS Core	*/
-#define CONFIG_AT91FAMILY
 #define CONFIG_AT91SAM9263		/* It's an Atmel AT91SAM9263 SoC*/
 #define CONFIG_VL_MA2SC			/* on an VL_MA2SC Board	*/
 #define CONFIG_ARCH_CPU_INIT