powerpc: zpc1900: remove orphan board

This board has been orphan for a while.
(Emails to its maintainer have been bouncing.)

Because MPC82xx family is old enough, nobody would pick up
the maintainership on it.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denx <wd@denx.de>

1 files changed, 0 insertions, 261 deletions

diff --git a/include/configs/ZPC1900.h b/include/configs/ZPC1900.h
deleted file mode 100644
index d76a140..0000000
--- a/include/configs/ZPC1900.h
+++ /dev/null
@@ -1,261 +0,0 @@
-/*
- * Copyright (C) 2003-2005 Arabella Software Ltd.
- * Yuli Barcohen <yuli@arabellasw.com>
- *
- * U-Boot configuration for Zephyr Engineering ZPC.1900 board.
- * This port was developed and tested on Revision C board.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_ZPC1900		1	/* ...on Zephyr ZPC.1900 board */
-
-#define	CONFIG_SYS_TEXT_BASE	0xFE000000
-
-#define CPU_ID_STR		"MPC8265"
-#define CONFIG_CPM2		1	/* Has a CPM2 */
-
-/* Allow serial number (serial#) and MAC address (ethaddr) to be overwritten */
-#define CONFIG_ENV_OVERWRITE
-
-/*
- * Select serial console configuration
- *
- * If either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
- * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
- * for SCC).
- */
-#define	CONFIG_CONS_ON_SMC		/* Console is on SMC         */
-#undef  CONFIG_CONS_ON_SCC		/* It's not on SCC           */
-#undef	CONFIG_CONS_NONE		/* It's not on external UART */
-#define CONFIG_CONS_INDEX	1	/* SMC1 is used for console  */
-
-/*
- * Select ethernet configuration
- *
- * If either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected,
- * then CONFIG_ETHER_INDEX must be set to the channel number (1-4 for
- * SCC, 1-3 for FCC)
- *
- * If CONFIG_ETHER_NONE is defined, then either the ethernet routines
- * must be defined elsewhere (as for the console), or CONFIG_CMD_NET
- * must be unset.
- */
-#undef	CONFIG_ETHER_ON_SCC		/* Ethernet is not on SCC */
-#define CONFIG_ETHER_ON_FCC		/* Ethernet is on FCC     */
-#undef	CONFIG_ETHER_NONE		/* No external Ethernet   */
-
-#ifdef CONFIG_ETHER_ON_FCC
-
-#define CONFIG_ETHER_INDEX	2	/* FCC2 is used for Ethernet */
-
-#if (CONFIG_ETHER_INDEX == 2)
-/*
- * - Rx clock is CLK13
- * - Tx clock is CLK14
- * - Select bus for bd/buffers (see 28-13)
- * - Full duplex
- */
-# define CONFIG_SYS_CMXFCR_MASK2	(CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
-# define CONFIG_SYS_CMXFCR_VALUE2	(CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
-# define CONFIG_SYS_CPMFCR_RAMTYPE	0
-# define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
-
-#endif /* CONFIG_ETHER_INDEX */
-
-#define CONFIG_MII			/* MII PHY management        */
-#define CONFIG_BITBANGMII		/* Bit-banged MDIO interface */
-/*
- * GPIO pins used for bit-banged MII communications
- */
-#define MDIO_PORT		2	/* Port C */
-#define MDIO_DECLARE		volatile ioport_t *iop = ioport_addr ( \
-					(immap_t *) CONFIG_SYS_IMMR, MDIO_PORT )
-#define MDC_DECLARE		MDIO_DECLARE
-
-#define MDIO_ACTIVE		(iop->pdir |=  0x00400000)
-#define MDIO_TRISTATE		(iop->pdir &= ~0x00400000)
-#define MDIO_READ		((iop->pdat &  0x00400000) != 0)
-
-#define MDIO(bit)		if(bit) iop->pdat |=  0x00400000; \
-				else	iop->pdat &= ~0x00400000
-
-#define MDC(bit)		if(bit) iop->pdat |=  0x00200000; \
-				else	iop->pdat &= ~0x00200000
-
-#define MIIDELAY		udelay(1)
-
-#endif /* CONFIG_ETHER_ON_FCC */
-
-#ifndef CONFIG_8260_CLKIN
-#define CONFIG_8260_CLKIN	66666666	/* in Hz */
-#endif
-
-#define CONFIG_BAUDRATE		38400
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_IMMAP
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-
-
-#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds */
-#define CONFIG_BOOTCOMMAND	"dhcp;bootm"	/* autoboot command */
-#define CONFIG_BOOTARGS		"root=/dev/nfs rw ip=:::::eth0:dhcp"
-
-#if defined(CONFIG_CMD_KGDB)
-#undef	CONFIG_KGDB_ON_SMC		/* define if kgdb on SMC */
-#define CONFIG_KGDB_ON_SCC		/* define if kgdb on SCC */
-#undef	CONFIG_KGDB_NONE		/* define if kgdb on something else */
-#define CONFIG_KGDB_INDEX	2	/* which serial channel for kgdb */
-#define CONFIG_KGDB_BAUDRATE	115200	/* speed to run kgdb serial port at */
-#endif
-
-#define CONFIG_BZIP2	/* include support for bzip2 compressed images */
-#undef	CONFIG_WATCHDOG			/* disable platform specific watchdog */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_LONGHELP			/* undef to save memory	    */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size  */
-#else
-#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size  */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size  */
-#define CONFIG_SYS_MAXARGS		16		/* max number of command args */
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size  */
-
-#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on */
-#define CONFIG_SYS_MEMTEST_END		0x03800000	/* 1 ... 56 MB in DRAM	*/
-
-#define CONFIG_SYS_LOAD_ADDR		0x400000	/* default load address */
-
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
-
-#define CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_SDRAM_SIZE		64
-
-#define CONFIG_SYS_IMMR		0xF0000000
-#define CONFIG_SYS_LSDRAM_BASE		0xFC000000
-#define CONFIG_SYS_FLASH_BASE		0xFE000000
-#define CONFIG_SYS_BCSR		0xFEA00000
-#define CONFIG_SYS_EEPROM		0xFEB00000
-#define CONFIG_SYS_FLSIMM_BASE		0xFF000000
-
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max num of flash banks	*/
-#define CONFIG_SYS_MAX_FLASH_SECT	32	/* max num of sects on one chip */
-
-#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLSIMM_BASE }
-
-#define BCSR_PCI_MODE		0x01
-
-#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE	0x4000	/* Size of used area in DPRAM	*/
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-/* Hard reset configuration word */
-#define CONFIG_SYS_HRCW_MASTER		(HRCW_EBM | HRCW_BPS01| HRCW_CIP          |\
-				 HRCW_L2CPC10 | HRCW_DPPC00 | HRCW_ISB100 |\
-				 HRCW_BMS | HRCW_LBPC00 | HRCW_APPC10     |\
-				 HRCW_MODCK_H0111                          \
-				) /* 0x16848207 */
-/* No slaves */
-#define CONFIG_SYS_HRCW_SLAVE1		0
-#define CONFIG_SYS_HRCW_SLAVE2		0
-#define CONFIG_SYS_HRCW_SLAVE3		0
-#define CONFIG_SYS_HRCW_SLAVE4		0
-#define CONFIG_SYS_HRCW_SLAVE5		0
-#define CONFIG_SYS_HRCW_SLAVE6		0
-#define CONFIG_SYS_HRCW_SLAVE7		0
-
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE
-
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-#define CONFIG_SYS_RAMBOOT
-#endif
-
-#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#define CONFIG_SYS_MALLOC_LEN		(4096 << 10)	/* Reserve 4 MB for malloc()	*/
-#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
-
-#if !defined(CONFIG_ENV_IS_IN_FLASH) && !defined(CONFIG_ENV_IS_IN_NVRAM)
-#define CONFIG_ENV_IS_IN_NVRAM	1
-#endif
-
-#ifdef CONFIG_ENV_IS_IN_FLASH
-#  define CONFIG_ENV_SECT_SIZE	0x10000
-#  define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
-#else
-#  define CONFIG_ENV_ADDR		(CONFIG_SYS_EEPROM + 0x400)
-#  define CONFIG_ENV_SIZE		0x1000
-#  define CONFIG_SYS_NVRAM_ACCESS_ROUTINE
-#endif
-
-#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC8260 CPU */
-#if defined(CONFIG_CMD_KGDB)
-#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
-#endif
-
-#define CONFIG_SYS_HID0_INIT		(HID0_ICFI)
-#define CONFIG_SYS_HID0_FINAL		(HID0_ICE | HID0_IFEM | HID0_ABE)
-
-#define CONFIG_SYS_HID2		0
-
-#define CONFIG_SYS_SIUMCR		0x42200000
-#define CONFIG_SYS_SYPCR		0xFFFFFFC3
-#define CONFIG_SYS_BCR			0x90000000
-#define CONFIG_SYS_SCCR		SCCR_DFBRG01
-
-#define CONFIG_SYS_RMR			RMR_CSRE
-#define CONFIG_SYS_TMCNTSC		(TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
-#define CONFIG_SYS_PISCR		(PISCR_PS|PISCR_PTF|PISCR_PTE)
-#define CONFIG_SYS_RCCR		0
-
-#define CONFIG_SYS_PSDMR		/* 0x834DA43B */0x014DA43A
-#define CONFIG_SYS_PSRT		0x0F/* 0x0C */
-#define CONFIG_SYS_LSDMR		0x0085A562
-#define CONFIG_SYS_LSRT		0x0F
-#define CONFIG_SYS_MPTPR		0x4000
-
-#define CONFIG_SYS_PSDRAM_BR		(CONFIG_SYS_SDRAM_BASE | 0x00000041)
-#define CONFIG_SYS_PSDRAM_OR		0xFC0028C0
-#define CONFIG_SYS_LSDRAM_BR		(CONFIG_SYS_LSDRAM_BASE | 0x00001861)
-#define CONFIG_SYS_LSDRAM_OR		0xFF803480
-
-#define CONFIG_SYS_BR0_PRELIM		(CONFIG_SYS_FLASH_BASE | 0x00000801)
-#define CONFIG_SYS_OR0_PRELIM		0xFFE00856
-#define CONFIG_SYS_BR5_PRELIM		(CONFIG_SYS_EEPROM | 0x00000801)
-#define CONFIG_SYS_OR5_PRELIM		0xFFFF03F6
-#define CONFIG_SYS_BR6_PRELIM		(CONFIG_SYS_FLSIMM_BASE | 0x00001801)
-#define CONFIG_SYS_OR6_PRELIM		0xFF000856
-#define CONFIG_SYS_BR7_PRELIM		(CONFIG_SYS_BCSR | 0x00000801)
-#define CONFIG_SYS_OR7_PRELIM		0xFFFF83F6
-
-#define CONFIG_SYS_RESET_ADDRESS	0xC0000000
-
-#endif /* __CONFIG_H */