m28evk: white space cleanup

Change all "#define<TAB>" sequences into "#define<SPACE>"

Signed-off-by: Wolfgang Denk <wd@denx.de>
Acked-by: Marek Vasut <marex@denx.de>

1 files changed, 128 insertions, 128 deletions

diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h
index f2725cc..95eb735 100644
--- a/include/configs/m28evk.h
+++ b/include/configs/m28evk.h
@@ -23,71 +23,71 @@
 /*
  * SoC configurations
  */
-#define	CONFIG_MX28				/* i.MX28 SoC */
-#define	CONFIG_MXS_GPIO				/* GPIO control */
-#define	CONFIG_SYS_HZ		1000		/* Ticks per second */
+#define CONFIG_MX28				/* i.MX28 SoC */
+#define CONFIG_MXS_GPIO				/* GPIO control */
+#define CONFIG_SYS_HZ		1000		/* Ticks per second */
 
 /*
  * Define M28EVK machine type by hand until it lands in mach-types
  */
-#define	MACH_TYPE_M28EVK	3613
+#define MACH_TYPE_M28EVK	3613
 
-#define	CONFIG_MACH_TYPE	MACH_TYPE_M28EVK
+#define CONFIG_MACH_TYPE	MACH_TYPE_M28EVK
 
 #include <asm/arch/regs-base.h>
 
-#define	CONFIG_SYS_NO_FLASH
-#define	CONFIG_BOARD_EARLY_INIT_F
-#define	CONFIG_ARCH_MISC_INIT
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_ARCH_MISC_INIT
 
 /*
  * SPL
  */
-#define	CONFIG_SPL
-#define	CONFIG_SPL_NO_CPU_SUPPORT_CODE
-#define	CONFIG_SPL_START_S_PATH		"arch/arm/cpu/arm926ejs/mxs"
-#define	CONFIG_SPL_LDSCRIPT	"arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds"
-#define	CONFIG_SPL_LIBCOMMON_SUPPORT
-#define	CONFIG_SPL_LIBGENERIC_SUPPORT
-#define	CONFIG_SPL_GPIO_SUPPORT
+#define CONFIG_SPL
+#define CONFIG_SPL_NO_CPU_SUPPORT_CODE
+#define CONFIG_SPL_START_S_PATH		"arch/arm/cpu/arm926ejs/mxs"
+#define CONFIG_SPL_LDSCRIPT	"arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds"
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_GPIO_SUPPORT
 
 /*
  * U-Boot Commands
  */
 #include <config_cmd_default.h>
-#define	CONFIG_DISPLAY_CPUINFO
-#define	CONFIG_DOS_PARTITION
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DOS_PARTITION
 
-#define	CONFIG_CMD_CACHE
-#define	CONFIG_CMD_DATE
-#define	CONFIG_CMD_DHCP
-#define	CONFIG_CMD_EEPROM
-#define	CONFIG_CMD_EXT2
-#define	CONFIG_CMD_FAT
-#define	CONFIG_CMD_GPIO
-#define	CONFIG_CMD_I2C
-#define	CONFIG_CMD_MII
-#define	CONFIG_CMD_MMC
-#define	CONFIG_CMD_NAND
-#define	CONFIG_CMD_NET
-#define	CONFIG_CMD_NFS
-#define	CONFIG_CMD_PING
-#define	CONFIG_CMD_SETEXPR
-#define	CONFIG_CMD_SF
-#define	CONFIG_CMD_SPI
-#define	CONFIG_CMD_USB
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_GPIO
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SETEXPR
+#define CONFIG_CMD_SF
+#define CONFIG_CMD_SPI
+#define CONFIG_CMD_USB
 
 /*
  * Memory configurations
  */
-#define	CONFIG_NR_DRAM_BANKS		1		/* 1 bank of DRAM */
-#define	PHYS_SDRAM_1			0x40000000	/* Base address */
-#define	PHYS_SDRAM_1_SIZE		0x20000000	/* Max 512 MB RAM */
-#define	CONFIG_SYS_MALLOC_LEN		0x00400000	/* 4 MB for malloc */
-#define	CONFIG_SYS_GBL_DATA_SIZE	128		/* Initial data */
-#define	CONFIG_SYS_MEMTEST_START	0x40000000	/* Memtest start adr */
-#define	CONFIG_SYS_MEMTEST_END		0x40400000	/* 4 MB RAM test */
-#define	CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
+#define CONFIG_NR_DRAM_BANKS		1		/* 1 bank of DRAM */
+#define PHYS_SDRAM_1			0x40000000	/* Base address */
+#define PHYS_SDRAM_1_SIZE		0x20000000	/* Max 512 MB RAM */
+#define CONFIG_SYS_MALLOC_LEN		0x00400000	/* 4 MB for malloc */
+#define CONFIG_SYS_GBL_DATA_SIZE	128		/* Initial data */
+#define CONFIG_SYS_MEMTEST_START	0x40000000	/* Memtest start adr */
+#define CONFIG_SYS_MEMTEST_END		0x40400000	/* 4 MB RAM test */
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
 /* Point initial SP in SRAM so SPL can use it too. */
 
 #define CONFIG_SYS_INIT_RAM_ADDR	0x00000000
@@ -102,42 +102,42 @@
  * strange BUG in ROM corrupting first 4 bytes of RAM when loading U-Boot
  * binary. In case there was more of this mess, 0x100 bytes are skipped.
  */
-#define	CONFIG_SYS_TEXT_BASE		0x40000100
+#define CONFIG_SYS_TEXT_BASE		0x40000100
 
 /*
  * U-Boot general configurations
  */
-#define	CONFIG_SYS_LONGHELP
-#define	CONFIG_SYS_PROMPT	"=> "
-#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O buffer size */
-#define	CONFIG_SYS_PBSIZE	\
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_PROMPT	"=> "
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O buffer size */
+#define CONFIG_SYS_PBSIZE	\
 	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 						/* Print buffer size */
-#define	CONFIG_SYS_MAXARGS	32		/* Max number of command args */
-#define	CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
+#define CONFIG_SYS_MAXARGS	32		/* Max number of command args */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
 						/* Boot argument buffer size */
-#define	CONFIG_VERSION_VARIABLE			/* U-BOOT version */
-#define	CONFIG_AUTO_COMPLETE			/* Command auto complete */
-#define	CONFIG_CMDLINE_EDITING			/* Command history etc */
-#define	CONFIG_SYS_HUSH_PARSER
+#define CONFIG_VERSION_VARIABLE			/* U-BOOT version */
+#define CONFIG_AUTO_COMPLETE			/* Command auto complete */
+#define CONFIG_CMDLINE_EDITING			/* Command history etc */
+#define CONFIG_SYS_HUSH_PARSER
 
 /*
  * Serial Driver
  */
-#define	CONFIG_PL011_SERIAL
-#define	CONFIG_PL011_CLOCK		24000000
-#define	CONFIG_PL01x_PORTS		{ (void *)MXS_UARTDBG_BASE }
-#define	CONFIG_CONS_INDEX		0
-#define	CONFIG_BAUDRATE			115200	/* Default baud rate */
+#define CONFIG_PL011_SERIAL
+#define CONFIG_PL011_CLOCK		24000000
+#define CONFIG_PL01x_PORTS		{ (void *)MXS_UARTDBG_BASE }
+#define CONFIG_CONS_INDEX		0
+#define CONFIG_BAUDRATE			115200	/* Default baud rate */
 
 /*
  * MMC Driver
  */
 #ifdef	CONFIG_CMD_MMC
-#define	CONFIG_MMC
-#define	CONFIG_BOUNCE_BUFFER
-#define	CONFIG_GENERIC_MMC
-#define	CONFIG_MXS_MMC
+#define CONFIG_MMC
+#define CONFIG_BOUNCE_BUFFER
+#define CONFIG_GENERIC_MMC
+#define CONFIG_MXS_MMC
 #endif
 
 /*
@@ -148,31 +148,31 @@
 /*
  * NAND
  */
-#define	CONFIG_ENV_SIZE			(16 * 1024)
+#define CONFIG_ENV_SIZE			(16 * 1024)
 #ifdef	CONFIG_CMD_NAND
-#define	CONFIG_NAND_MXS
-#define	CONFIG_SYS_MAX_NAND_DEVICE	1
-#define	CONFIG_SYS_NAND_BASE		0x60000000
-#define	CONFIG_SYS_NAND_5_ADDR_CYCLE
+#define CONFIG_NAND_MXS
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define CONFIG_SYS_NAND_BASE		0x60000000
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 
 /* Environment is in NAND */
-#define	CONFIG_ENV_IS_IN_NAND
-#define	CONFIG_ENV_SIZE_REDUND		CONFIG_ENV_SIZE
-#define	CONFIG_ENV_SECT_SIZE		(128 * 1024)
-#define	CONFIG_ENV_RANGE		(512 * 1024)
-#define	CONFIG_ENV_OFFSET		0x300000
-#define	CONFIG_ENV_OFFSET_REDUND	\
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_SIZE_REDUND		CONFIG_ENV_SIZE
+#define CONFIG_ENV_SECT_SIZE		(128 * 1024)
+#define CONFIG_ENV_RANGE		(512 * 1024)
+#define CONFIG_ENV_OFFSET		0x300000
+#define CONFIG_ENV_OFFSET_REDUND	\
 		(CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)
 
-#define	CONFIG_CMD_UBI
-#define	CONFIG_CMD_UBIFS
-#define	CONFIG_CMD_MTDPARTS
-#define	CONFIG_RBTREE
-#define	CONFIG_LZO
-#define	CONFIG_MTD_DEVICE
-#define	CONFIG_MTD_PARTITIONS
-#define	MTDIDS_DEFAULT			"nand0=gpmi-nand"
-#define	MTDPARTS_DEFAULT			\
+#define CONFIG_CMD_UBI
+#define CONFIG_CMD_UBIFS
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_RBTREE
+#define CONFIG_LZO
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+#define MTDIDS_DEFAULT			"nand0=gpmi-nand"
+#define MTDPARTS_DEFAULT			\
 	"mtdparts=gpmi-nand:"			\
 		"3m(bootloader)ro,"		\
 		"512k(environment),"		\
@@ -182,34 +182,34 @@
 		"8m(ramdisk),"			\
 		"-(filesystem)"
 #else
-#define	CONFIG_ENV_IS_NOWHERE
+#define CONFIG_ENV_IS_NOWHERE
 #endif
 
 /*
  * Ethernet on SOC (FEC)
  */
 #ifdef	CONFIG_CMD_NET
-#define	CONFIG_ETHPRIME			"FEC0"
-#define	CONFIG_FEC_MXC
-#define	CONFIG_MII
-#define	CONFIG_FEC_XCV_TYPE		RMII
+#define CONFIG_ETHPRIME			"FEC0"
+#define CONFIG_FEC_MXC
+#define CONFIG_MII
+#define CONFIG_FEC_XCV_TYPE		RMII
 #endif
 
 /*
  * I2C
  */
 #ifdef	CONFIG_CMD_I2C
-#define	CONFIG_I2C_MXS
-#define	CONFIG_HARD_I2C
-#define	CONFIG_SYS_I2C_SPEED		400000
+#define CONFIG_I2C_MXS
+#define CONFIG_HARD_I2C
+#define CONFIG_SYS_I2C_SPEED		400000
 #endif
 
 /*
  * EEPROM
  */
 #ifdef	CONFIG_CMD_EEPROM
-#define	CONFIG_SYS_I2C_MULTI_EEPROMS
-#define	CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
+#define CONFIG_SYS_I2C_MULTI_EEPROMS
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
 #endif
 
 /*
@@ -217,13 +217,13 @@
  */
 #ifdef	CONFIG_CMD_DATE
 /* Use the internal RTC in the MXS chip */
-#define	CONFIG_RTC_INTERNAL
+#define CONFIG_RTC_INTERNAL
 #ifdef	CONFIG_RTC_INTERNAL
-#define	CONFIG_RTC_MXS
+#define CONFIG_RTC_MXS
 #else
-#define	CONFIG_RTC_M41T62
-#define	CONFIG_SYS_I2C_RTC_ADDR		0x68
-#define	CONFIG_SYS_M41T11_BASE_YEAR	2000
+#define CONFIG_RTC_M41T62
+#define CONFIG_SYS_I2C_RTC_ADDR		0x68
+#define CONFIG_SYS_M41T11_BASE_YEAR	2000
 #endif
 #endif
 
@@ -231,59 +231,59 @@
  * USB
  */
 #ifdef	CONFIG_CMD_USB
-#define	CONFIG_USB_EHCI
-#define	CONFIG_USB_EHCI_MXS
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_MXS
 #define CONFIG_EHCI_MXS_PORT0
 #define CONFIG_EHCI_MXS_PORT1
 #define CONFIG_USB_MAX_CONTROLLER_COUNT	2
-#define	CONFIG_EHCI_IS_TDI
-#define	CONFIG_USB_STORAGE
+#define CONFIG_EHCI_IS_TDI
+#define CONFIG_USB_STORAGE
 #endif
 
 /*
  * SPI
  */
 #ifdef	CONFIG_CMD_SPI
-#define	CONFIG_HARD_SPI
-#define	CONFIG_MXS_SPI
-#define	CONFIG_SPI_HALF_DUPLEX
-#define	CONFIG_DEFAULT_SPI_BUS		2
-#define	CONFIG_DEFAULT_SPI_CS		0
-#define	CONFIG_DEFAULT_SPI_MODE		SPI_MODE_0
+#define CONFIG_HARD_SPI
+#define CONFIG_MXS_SPI
+#define CONFIG_SPI_HALF_DUPLEX
+#define CONFIG_DEFAULT_SPI_BUS		2
+#define CONFIG_DEFAULT_SPI_CS		0
+#define CONFIG_DEFAULT_SPI_MODE		SPI_MODE_0
 
 /* SPI FLASH */
 #ifdef	CONFIG_CMD_SF
-#define	CONFIG_SPI_FLASH
-#define	CONFIG_SPI_FLASH_STMICRO
-#define	CONFIG_SF_DEFAULT_BUS		2
-#define	CONFIG_SF_DEFAULT_CS		0
-#define	CONFIG_SF_DEFAULT_SPEED		40000000
-#define	CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_STMICRO
+#define CONFIG_SF_DEFAULT_BUS		2
+#define CONFIG_SF_DEFAULT_CS		0
+#define CONFIG_SF_DEFAULT_SPEED		40000000
+#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
 
-#define	CONFIG_ENV_SPI_BUS		2
-#define	CONFIG_ENV_SPI_CS		0
-#define	CONFIG_ENV_SPI_MAX_HZ		40000000
-#define	CONFIG_ENV_SPI_MODE		SPI_MODE_0
+#define CONFIG_ENV_SPI_BUS		2
+#define CONFIG_ENV_SPI_CS		0
+#define CONFIG_ENV_SPI_MAX_HZ		40000000
+#define CONFIG_ENV_SPI_MODE		SPI_MODE_0
 #endif
 #endif
 
 /*
  * Boot Linux
  */
-#define	CONFIG_CMDLINE_TAG
-#define	CONFIG_SETUP_MEMORY_TAGS
-#define	CONFIG_BOOTDELAY	3
-#define	CONFIG_BOOTFILE		"uImage"
-#define	CONFIG_BOOTARGS		"console=ttyAMA0,115200n8 "
-#define	CONFIG_BOOTCOMMAND	"run bootcmd_net"
-#define	CONFIG_LOADADDR		0x42000000
-#define	CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
-#define	CONFIG_OF_LIBFDT
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_BOOTDELAY	3
+#define CONFIG_BOOTFILE		"uImage"
+#define CONFIG_BOOTARGS		"console=ttyAMA0,115200n8 "
+#define CONFIG_BOOTCOMMAND	"run bootcmd_net"
+#define CONFIG_LOADADDR		0x42000000
+#define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
+#define CONFIG_OF_LIBFDT
 
 /*
  * Extra Environments
  */
-#define	CONFIG_EXTRA_ENV_SETTINGS					\
+#define CONFIG_EXTRA_ENV_SETTINGS					\
 	"update_nand_full_filename=u-boot.nand\0"			\
 	"update_nand_firmware_filename=u-boot.sb\0"			\
 	"update_sd_firmware_filename=u-boot.sd\0"			\