diff options
| author | Sergei Poselenov <sposelenov@emcraft.com> | 2008-05-07 15:10:49 +0200 |
|---|---|---|
| committer | Wolfgang Denk <wd@denx.de> | 2008-05-20 23:27:49 +0200 |
| commit | e18575d5f589a62e19c70d471d4b4e27cad3af56 (patch) | |
| tree | 3cb32a60594e5c6cbd4be368216107ff5eb77fb9 /include/configs | |
| parent | 5d108ac8f435924c624cd6aaacd44f35f5cf94c0 (diff) | |
| download | u-boot-imx-e18575d5f589a62e19c70d471d4b4e27cad3af56.zip u-boot-imx-e18575d5f589a62e19c70d471d4b4e27cad3af56.tar.gz u-boot-imx-e18575d5f589a62e19c70d471d4b4e27cad3af56.tar.bz2 | |
socrates: changes to support FDT
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Wolfgang Denk <wd@denx.de>
Diffstat (limited to 'include/configs')
| -rw-r--r-- | include/configs/socrates.h | 58 |
1 files changed, 25 insertions, 33 deletions
diff --git a/include/configs/socrates.h b/include/configs/socrates.h index de8cd72..a8f81ec 100644 --- a/include/configs/socrates.h +++ b/include/configs/socrates.h @@ -114,11 +114,9 @@ #define CFG_DDR_CLK_CONTROL 0x03800000 #define CFG_SDRAM_SIZE 256 /* in Megs */ -#if 1 #define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for DDR setup*/ #define SPD_EEPROM_ADDRESS 0x50 /* DDR DIMM */ #define MPC85xx_DDR_SDRAM_CLK_CNTL /* 85xx has clock control reg */ -#endif /* * Flash on the Local Bus @@ -145,7 +143,7 @@ #define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector */ #define CFG_MAX_FLASH_BANKS 2 /* number of banks */ -#define CFG_MAX_FLASH_SECT 512 /* sectors per device */ +#define CFG_MAX_FLASH_SECT 256 /* sectors per device */ #undef CFG_FLASH_CHECKSUM #define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ #define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ @@ -205,28 +203,8 @@ #define CFG_I2C_OFFSET 0x3000 /* I2C RTC */ -#define CONFIG_RTC_DS1337 /* Use ds1337 rtc via i2c */ -#define CFG_I2C_RTC_ADDR 0x68 /* at address 0x68 */ - -#if 0 -/* I2C EEPROM */ -/* - * EEPROM configuration for onboard EEPROM M24C32 (M24C64 should work also). - */ -#define CFG_I2C_EEPROM_ADDR 0x50 /* 1010000x */ -#define CFG_I2C_EEPROM_ADDR_LEN 2 -#define CFG_EEPROM_PAGE_WRITE_BITS 5 /* =32 Bytes per write */ -#define CFG_EEPROM_PAGE_WRITE_ENABLE -#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20 -#define CFG_I2C_MULTI_EEPROMS 1 /* more than one eeprom */ - -/* I2C SYSMON (LM75) */ -#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */ -#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */ -#define CFG_DTT_MAX_TEMP 70 -#define CFG_DTT_LOW_TEMP -30 -#define CFG_DTT_HYSTERESIS 3 -#endif +#define CONFIG_RTC_RX8025 /* Use Epson rx8025 rtc via i2c */ +#define CFG_I2C_RTC_ADDR 0x32 /* at address 0x32 */ /* RapidIO MMU */ #define CFG_RIO_MEM_BASE 0xc0000000 /* base address */ @@ -280,6 +258,9 @@ #define CONFIG_ETHPRIME "TSEC0" #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ +#define CONFIG_HAS_ETH0 +#define CONFIG_HAS_ETH1 + /* * Environment */ @@ -379,7 +360,7 @@ #undef CONFIG_BOOTARGS /* the boot command will set bootargs */ #define CONFIG_EXTRA_ENV_SETTINGS \ - "bootfile=/tftpboot/socrates\0" \ + "bootfile=/tftpboot/socrates/uImage\0" \ "netdev=eth0\0" \ "consdev=ttyS0\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ @@ -390,15 +371,22 @@ ":$hostname:$netdev:off panic=1\0" \ "addcons=setenv bootargs $bootargs " \ "console=$consdev,$baudrate\0" \ - "flash_nfs=run nfsargs addip addcons;" \ - "bootm $kernel_addr\0" \ "flash_self=run ramargs addip addcons;" \ - "bootm $kernel_addr $ramdisk_addr\0" \ - "net_nfs=tftp $loadaddr $bootfile;" \ - "run nfsargs addip addcons;bootm\0" \ + "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ + "flash_nfs=run nfsargs addip addcons;" \ + "bootm ${kernel_addr} - ${fdt_addr}\0" \ + "net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \ + "tftp ${fdt_addr_r} ${fdt_file}; " \ + "run nfsargs addip addcons;" \ + "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ + "fdt_file=socrates/socrates.dtb\0" \ + "fdt_addr_r=B00000\0" \ + "fdt_addr=FC1E0000\0" \ "rootpath=/opt/eldk/ppc_85xx\0" \ - "kernel_addr=FE000000\0" \ - "ramdisk_addr=FE180000\0" \ + "kernel_addr=FC000000\0" \ + "kernel_addr_r=200000\0" \ + "ramdisk_addr=FC200000\0" \ + "ramdisk_addr_r=400000\0" \ "load=tftp 100000 /tftpboot/$hostname/u-boot.bin\0" \ "update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;" \ "cp.b 100000 fffc0000 40000;" \ @@ -407,4 +395,8 @@ "" #define CONFIG_BOOTCOMMAND "run flash_self" +/* pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 + #endif /* __CONFIG_H */ |