summaryrefslogtreecommitdiff
path: root/include/configs
diff options
context:
space:
mode:
authorWolfgang Denk <wd@denx.de>2012-04-16 23:01:12 +0200
committerWolfgang Denk <wd@denx.de>2012-04-16 23:01:12 +0200
commitdb39f24151627733d6166c5e9a875fe8b356fa72 (patch)
treed091e23af47b9ae848c6f69144f941d9f072aae6 /include/configs
parentb64c2420e02a7d068aae6e0d069f270feb3cdc9a (diff)
parent2694bb9bcc8ca9636faf38c866dda7bf0529e35f (diff)
downloadu-boot-imx-db39f24151627733d6166c5e9a875fe8b356fa72.zip
u-boot-imx-db39f24151627733d6166c5e9a875fe8b356fa72.tar.gz
u-boot-imx-db39f24151627733d6166c5e9a875fe8b356fa72.tar.bz2
Merge branch 'master' of git://git.denx.de/u-boot-arm
* 'master' of git://git.denx.de/u-boot-arm: ARM926EJS: Fix cache.c to comply with checkpatch.pl ARM926EJS: Make asm routines volatile in cache ops MX35: mx35pdk: wrong board revision ARM1136: MX35: Make asm routines volatile in cache ops ARM: add u-boot.imx as target for i.MX SOCs M28: Pull out CONFIG_APBH_DMA so it's always enabled DMA: Split the APBH DMA init into block and channel init imx: Return gpio_set_value in gpio_direction_output imx: Use GPIO_TO_PORT macro in the gpio driver instead of (gpio >> 5) imx: Add GPIO_TO_PORT macro in the mxc_gpio driver imx: Remove unneeded/repititive definitions from imx headers i.MX28: Allow coexistence of PIO and DMA mode for SD/MMC MX31: mx31pdk: drop enable_caches from board file i.MX28: Fix initial stack pointer position mx35: mx35pdk: fix when cache functions are linked mx35: flea3: fix when cache functions are linked ARM: 926ejs: use debug() for misaligned addresses ARM1136: add cache flush and invalidate operations mx6qsabrelite: Fix the serial console port mx6qsabrelite: Add boot switch setting information into the README i.MX6: mx6qsabrelite: add cache commands if cache is enabled i.MX6: implement enable_caches() i.MX6: define CACHELINE_SIZE MX53: DDR: Fix ZQHWCTRL field TZQ_CS mx28evk: Add a README file mx28: Split the README into a common part and a m28 specific part tricorder: Load kernel from ubifs tricorder: Add UBIFS cm-t35: fix Ethernet reset timing hawkboard: Add CONFIG_SPL_LIBGENERIC_SUPPORT BeagleBoard: Remove userbutton command and use gpio command instead OMAP: Move omap1510inn to Unmaintained / Orphaned
Diffstat (limited to 'include/configs')
-rw-r--r--include/configs/flea3.h2
-rw-r--r--include/configs/hawkboard.h1
-rw-r--r--include/configs/m28evk.h8
-rw-r--r--include/configs/mx28evk.h2
-rw-r--r--include/configs/mx35pdk.h3
-rw-r--r--include/configs/mx6qarm2.h2
-rw-r--r--include/configs/mx6qsabrelite.h8
-rw-r--r--include/configs/omap3_beagle.h11
-rw-r--r--include/configs/tricorder.h15
9 files changed, 41 insertions, 11 deletions
diff --git a/include/configs/flea3.h b/include/configs/flea3.h
index 649e272..f046a58 100644
--- a/include/configs/flea3.h
+++ b/include/configs/flea3.h
@@ -34,6 +34,7 @@
#define CONFIG_MX35_HCLK_FREQ 24000000
#define CONFIG_SYS_DCACHE_OFF
+#define CONFIG_SYS_CACHELINE_SIZE 32
#define CONFIG_DISPLAY_CPUINFO
@@ -98,6 +99,7 @@
#define CONFIG_BOOTP_DNS
#define CONFIG_CMD_NAND
+#define CONFIG_CMD_CACHE
#define CONFIG_CMD_I2C
#define CONFIG_CMD_SPI
diff --git a/include/configs/hawkboard.h b/include/configs/hawkboard.h
index 50a1c17..0859371 100644
--- a/include/configs/hawkboard.h
+++ b/include/configs/hawkboard.h
@@ -62,6 +62,7 @@
#define CONFIG_SPL_NAND_SUPPORT
#define CONFIG_SPL_NAND_SIMPLE
#define CONFIG_SPL_NAND_LOAD
+#define CONFIG_SPL_LIBGENERIC_SUPPORT /* for udelay and __div64_32 for NAND */
#define CONFIG_SPL_SERIAL_SUPPORT
#define CONFIG_SPL_LDSCRIPT "board/$(BOARDDIR)/u-boot-spl-hawk.lds"
#define CONFIG_SPL_TEXT_BASE 0xc1080000
diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h
index 8b83180..012381a 100644
--- a/include/configs/m28evk.h
+++ b/include/configs/m28evk.h
@@ -93,7 +93,7 @@
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
/* Point initial SP in SRAM so SPL can use it too. */
-#define CONFIG_SYS_INIT_RAM_ADDR 0x00002000
+#define CONFIG_SYS_INIT_RAM_ADDR 0x00000000
#define CONFIG_SYS_INIT_RAM_SIZE (128 * 1024)
#define CONFIG_SYS_INIT_SP_OFFSET \
@@ -146,12 +146,16 @@
#endif
/*
+ * APBH DMA
+ */
+#define CONFIG_APBH_DMA
+
+/*
* NAND
*/
#define CONFIG_ENV_SIZE (16 * 1024)
#ifdef CONFIG_CMD_NAND
#define CONFIG_NAND_MXS
-#define CONFIG_APBH_DMA
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE 0x60000000
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h
index 705fdab..02f3366 100644
--- a/include/configs/mx28evk.h
+++ b/include/configs/mx28evk.h
@@ -81,7 +81,7 @@
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
/* Point initial SP in SRAM so SPL can use it too. */
-#define CONFIG_SYS_INIT_RAM_ADDR 0x00002000
+#define CONFIG_SYS_INIT_RAM_ADDR 0x00000000
#define CONFIG_SYS_INIT_RAM_SIZE (128 * 1024)
#define CONFIG_SYS_INIT_SP_OFFSET \
diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h
index 0c62b9f..de4b954 100644
--- a/include/configs/mx35pdk.h
+++ b/include/configs/mx35pdk.h
@@ -34,10 +34,10 @@
#define CONFIG_MX35_HCLK_FREQ 24000000
#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
/* Set TEXT at the beginning of the NOR flash */
#define CONFIG_SYS_TEXT_BASE 0xA0000000
+#define CONFIG_SYS_CACHELINE_SIZE 32
#define CONFIG_SYS_64BIT_VSPRINTF
@@ -106,6 +106,7 @@
#define CONFIG_BOOTP_DNS
#define CONFIG_CMD_NAND
+#define CONFIG_CMD_CACHE
#define CONFIG_CMD_I2C
#define CONFIG_CMD_SPI
diff --git a/include/configs/mx6qarm2.h b/include/configs/mx6qarm2.h
index 0962d3c..e83aec6 100644
--- a/include/configs/mx6qarm2.h
+++ b/include/configs/mx6qarm2.h
@@ -169,4 +169,6 @@
#define CONFIG_OF_LIBFDT
+#define CONFIG_SYS_DCACHE_OFF
+
#endif /* __CONFIG_H */
diff --git a/include/configs/mx6qsabrelite.h b/include/configs/mx6qsabrelite.h
index 8bc8a83..f52c3c7 100644
--- a/include/configs/mx6qsabrelite.h
+++ b/include/configs/mx6qsabrelite.h
@@ -116,7 +116,7 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
"script=boot.scr\0" \
"uimage=uImage\0" \
- "console=ttymxc3\0" \
+ "console=ttymxc1\0" \
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
"mmcdev=0\0" \
@@ -212,4 +212,10 @@
#define CONFIG_OF_LIBFDT
+#define CONFIG_SYS_DCACHE_OFF
+
+#ifndef CONFIG_SYS_DCACHE_OFF
+#define CONFIG_CMD_CACHE
+#endif
+
#endif /* __CONFIG_H */
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index d3a0122..ddeb414 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -167,6 +167,7 @@
#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_SETEXPR /* Evaluate expressions */
+#define CONFIG_CMD_GPIO /* Enable gpio command */
#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */
#undef CONFIG_CMD_FPGA /* FPGA configuration Support */
@@ -280,10 +281,16 @@
"ramboot=echo Booting from ramdisk ...; " \
"run ramargs; " \
"bootm ${loadaddr}\0" \
-
+ "userbutton=if gpio input 173; then run userbutton_xm; " \
+ "else run userbutton_nonxm; fi;\0" \
+ "userbutton_xm=gpio input 4;\0" \
+ "userbutton_nonxm=gpio input 7;\0"
+/* "run userbutton" will return 1 (false) if is pressed and 0 (false) if not */
#define CONFIG_BOOTCOMMAND \
"if mmc rescan ${mmcdev}; then " \
- "if userbutton; then " \
+ "if run userbutton; then " \
+ "setenv bootenv uEnv.txt;" \
+ "else " \
"setenv bootenv user.txt;" \
"fi;" \
"echo SD/MMC found on device ${mmcdev};" \
diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h
index ba8847b..801a24f 100644
--- a/include/configs/tricorder.h
+++ b/include/configs/tricorder.h
@@ -71,7 +71,7 @@
/* Size of malloc() pool */
#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */
/* Sector */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (512 << 10))
+#define CONFIG_SYS_MALLOC_LEN (1024*1024)
/* Hardware drivers */
@@ -139,7 +139,9 @@
#define CONFIG_CMD_MTDPARTS /* Enable MTD parts commands */
#define CONFIG_CMD_NAND /* NAND support */
#define CONFIG_CMD_NAND_LOCK_UNLOCK /* nand (un)lock commands */
-#define CONFIG_CMD_UBI /* UBIFS commands */
+#define CONFIG_CMD_UBI /* UBI commands */
+#define CONFIG_CMD_UBIFS /* UBIFS commands */
+#define CONFIG_LZO /* LZO is needed for UBIFS */
#undef CONFIG_CMD_NET
#undef CONFIG_CMD_NFS
@@ -180,7 +182,8 @@
"setenv bootargs ${bootargs} " \
"omapfb.mode=lcd:${lcdmode} " \
"omapdss.def_disp=${defaultdisplay} " \
- "root=ubi0:rootfs " \
+ "root=ubi0:root " \
+ "ubi.mtd=4 " \
"rootfstype=ubifs " \
"${kernelopts}\0" \
"loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
@@ -191,9 +194,13 @@
"mmcboot=echo Booting from mmc ...; " \
"run mmcargs; " \
"bootm ${loadaddr}\0" \
+ "loaduimage_ubi=mtd default; " \
+ "ubi part fs; " \
+ "ubifsmount root; " \
+ "ubifsload ${loadaddr} /boot/uImage\0" \
"nandboot=echo Booting from nand ...; " \
"run nandargs; " \
- "nand read ${loadaddr} 280000 400000; " \
+ "run loaduimage_ubi; " \
"bootm ${loadaddr}\0" \
"autoboot=if mmc rescan ${mmcdev}; then " \
"if run loadbootscript; then " \