ARM: remove broken "netstar" board

Signed-off-by: Wolfgang Denk <wd@denx.de>

1 files changed, 0 insertions, 245 deletions

diff --git a/include/configs/netstar.h b/include/configs/netstar.h
deleted file mode 100644
index f159013..0000000
--- a/include/configs/netstar.h
+++ /dev/null
@@ -1,245 +0,0 @@
-/*
- * (C) Copyright 2005 2N TELEKOMUNIKACE, Ladislav Michl
- *
- * Configuation settings for the TI OMAP NetStar board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <configs/omap1510.h>
-
-#define CONFIG_ARM925T	1		/* This is an arm925t CPU */
-#define CONFIG_OMAP	1		/* in a TI OMAP core */
-#define CONFIG_OMAP1510 1		/* which is in a 5910 */
-
-/* Input clock of PLL */
-#define CONFIG_SYS_CLK_FREQ		150000000	/* 150MHz */
-#define CONFIG_XTAL_FREQ		12000000	/*  12MHz */
-
-#undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff */
-
-#define CONFIG_MISC_INIT_R		/* There is nothing to really init */
-#define BOARD_LATE_INIT			/* but we flash the LEDs here */
-
-#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS	1
-#define CONFIG_INITRD_TAG		1
-
-#define CONFIG_SILENT_CONSOLE		1	/* enable silent startup */
-#define CONFIG_SYS_CONSOLE_INFO_QUIET
-
-/*
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS		1
-#define PHYS_SDRAM_1			0x10000000
-#define PHYS_SDRAM_1_SIZE		(64 * 1024 * 1024)
-#define PHYS_FLASH_1			0x00000000
-
-#define CONFIG_SYS_MONITOR_BASE		PHYS_FLASH_1
-#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)
-
-/*
- * Environment settings
- */
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_ADDR			0x4000
-#define CONFIG_ENV_SIZE			(8 * 1024)
-#define CONFIG_ENV_SECT_SIZE		(8 * 1024)
-#define CONFIG_ENV_ADDR_REDUND		0x6000
-#define CONFIG_ENV_SIZE_REDUND		CONFIG_ENV_SIZE
-#define CONFIG_ENV_OVERWRITE
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN		(4 * 1024 * 1024)
-
-/*
- * The stack size is set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE		(1 * 1024 * 1024)
-
-/*
- * Hardware drivers
- */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
-#define CONFIG_SYS_NS16550_CLK		(CONFIG_XTAL_FREQ)
-#define CONFIG_SYS_NS16550_COM1		OMAP1510_UART1_BASE
-
-#define CONFIG_NET_MULTI
-#define CONFIG_SMC91111
-#define CONFIG_SMC91111_BASE		0x04000300
-
-#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
-#define CONFIG_SYS_MAX_FLASH_BANKS	1
-#define CONFIG_SYS_MAX_FLASH_SECT	19
-
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
-#define CONFIG_FLASH_CFI_LEGACY
-#define CONFIG_SYS_FLASH_LEGACY_512Kx16
-
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_SYS_NAND_BASE		0x04000000 + (2 << 23)
-#define NAND_ALLOW_ERASE_ALL		1
-
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SLAVE		1
-#define CONFIG_DRIVER_OMAP1510_I2C
-
-#define CONFIG_RTC_DS1307
-#define CONFIG_SYS_I2C_RTC_ADDR		0x68
-
-
-#define CONFIG_CONS_INDEX		1
-#define CONFIG_BAUDRATE			115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
-/*
- * Partitions (mtdparts command line support)
- */
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_MTD_DEVICE
-#define CONFIG_FLASH_CFI_MTD
-#define MTDIDS_DEFAULT		"nor0=physmap-flash.0,nand0=gen_nand.0"
-#define MTDPARTS_DEFAULT	"mtdparts=" \
-	"physmap-flash.0:8k@16k(env),8k(r_env),448k@576k(u-boot);" \
-	"gen_nand.0:4M(kernel0),40M(rootfs0),4M(kernel1),40M(rootfs1),-(data)"
-
-/*
- * Command line configuration
- */
-#define CONFIG_CMD_BDI
-#define CONFIG_CMD_BOOTD
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_SAVEENV
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_IMI
-#define CONFIG_CMD_LOADB
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_RUN
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-
-#define CONFIG_LOOPW
-
-#define CONFIG_BOOTDELAY	3
-#define CONFIG_ZERO_BOOTDELAY_CHECK	/* allow to break in always */
-#undef  CONFIG_BOOTARGS		/* the boot command will set bootargs*/
-#define CONFIG_SYS_AUTOLOAD		"n"		/* No autoload */
-#define CONFIG_BOOTCOMMAND	"run fboot"
-#define CONFIG_PREBOOT		"run setup"
-#define	CONFIG_EXTRA_ENV_SETTINGS					\
-	"autostart=yes\0"						\
-	"ospart=0\0"							\
-	"setup=setenv bootargs console=ttyS0,$baudrate $mtdparts\0"	\
-	"setpart="							\
-	"if test -n $swapos; then "					\
-		"setenv swapos; saveenv; "				\
-		"if test $ospart -eq 0; then "				\
-			"setenv ospart 1; "				\
-		"else "							\
-			"setenv ospart 0; "				\
-		"fi; "							\
-	"fi\0"								\
-	"nfsargs=setenv bootargs $bootargs "				\
-		"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off " \
-		"nfsroot=$rootpath root=/dev/nfs\0"			\
-	"flashargs=run setpart;setenv bootargs $bootargs "		\
-		"root=mtd:rootfs$ospart ro "				\
-		"rootfstype=jffs2\0"					\
-	"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off\0"	\
-	"fboot=run flashargs;nboot kernel$ospart\0"			\
-	"nboot=bootp;run nfsargs;tftp\0"
-
-#if 0	/* feel free to disable for development */
-#define	CONFIG_AUTOBOOT_KEYED		/* Enable password protection	*/
-#define CONFIG_AUTOBOOT_PROMPT		\
-	"\nNetStar PBX - boot in %d secs...\n", bootdelay
-#define CONFIG_AUTOBOOT_DELAY_STR	"."	/* 1st "password"	*/
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_PROMPT		"# "
-#define CONFIG_SYS_CBSIZE		256
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-	 sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS		16
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
-
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
-#define CONFIG_AUTO_COMPLETE
-
-#define CONFIG_SYS_MEMTEST_START	PHYS_SDRAM_1
-#define CONFIG_SYS_MEMTEST_END		PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE - \
-	(CONFIG_SYS_MONITOR_LEN + CONFIG_SYS_MALLOC_LEN + CONFIG_STACKSIZE)
-
-#define CONFIG_SYS_LOAD_ADDR		(PHYS_SDRAM_1 + 0x400000)
-
-/* The 1510 has 3 timers, they can be driven by the RefClk (12MHz) or by DPLL1.
- * This time is further subdivided by a local divisor.
- */
-#define CONFIG_SYS_TIMERBASE		OMAP1510_TIMER1_BASE
-#define CONFIG_SYS_PTV			7
-#define CONFIG_SYS_HZ			1000
-
-#define OMAP5910_DPLL_DIV		1
-#define OMAP5910_DPLL_MUL		\
-	((CONFIG_SYS_CLK_FREQ * (1 << OMAP5910_DPLL_DIV)) / CONFIG_XTAL_FREQ)
-
-#define OMAP5910_ARM_PER_DIV	2	/* CKL/4 */
-#define OMAP5910_LCD_DIV	2	/* CKL/4 */
-#define OMAP5910_ARM_DIV	0	/* CKL/1 */
-#define OMAP5910_DSP_DIV	0	/* CKL/1 */
-#define OMAP5910_TC_DIV		1	/* CKL/2 */
-#define OMAP5910_DSP_MMU_DIV	1	/* CKL/2 */
-#define OMAP5910_ARM_TIM_SEL	1	/* CKL used for MPU timers */
-
-#define OMAP5910_ARM_EN_CLK	0x03d6	/* 0000 0011 1101 0110b */
-#define OMAP5910_ARM_CKCTL	((OMAP5910_ARM_PER_DIV)  |	\
-				 (OMAP5910_LCD_DIV << 2) |	\
-				 (OMAP5910_ARM_DIV << 4) |	\
-				 (OMAP5910_DSP_DIV << 6) |	\
-				 (OMAP5910_TC_DIV << 8) |	\
-				 (OMAP5910_DSP_MMU_DIV << 10) |	\
-				 (OMAP5910_ARM_TIM_SEL << 12))
-
-#endif	/* __CONFIG_H */