ppc4xx: Update APC405 configuration

- enable esd's auto_update mechanism
- support alternative flash layout on rev. 1.8 boards
- update default environment
- use common CFI flash driver
- coding style cleanup

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>

1 files changed, 193 insertions, 153 deletions

diff --git a/include/configs/APC405.h b/include/configs/APC405.h
index f6495e4..5b04888 100644
--- a/include/configs/APC405.h
+++ b/include/configs/APC405.h
@@ -1,4 +1,7 @@
 /*
+ * (C) Copyright 2005-2008
+ * Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com
+ *
  * (C) Copyright 2001-2004
  * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
  *
@@ -24,7 +27,6 @@
 /*
  * board/config.h - configuration options, board specific
  */
-
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
@@ -32,42 +34,78 @@
  * High Level Configuration Options
  * (easy to change)
  */
-
 #define CONFIG_405GP		1	/* This is a PPC405 CPU		*/
 #define CONFIG_4xx		1	/* ...member of PPC4xx family   */
 #define CONFIG_APCG405		1	/* ...on a APC405 board 	*/
 
 #define CONFIG_BOARD_EARLY_INIT_F 1	/* call board_early_init_f()	*/
+#define CONFIG_BOARD_EARLY_INIT_R 1
 #define CONFIG_MISC_INIT_R      1       /* call misc_init_r()           */
 
 #define CONFIG_SYS_CLK_FREQ     33333400 /* external frequency to pll   */
 
 #define CONFIG_BOARD_TYPES	1	/* support board types		*/
 
-#define CONFIG_BAUDRATE		9600
-#define CONFIG_BOOTDELAY	3	/* autoboot after 3 seconds	*/
+#define CONFIG_BAUDRATE		115200
+#define CONFIG_BOOTDELAY	1	/* autoboot after 3 seconds	*/
 
 #undef	CONFIG_BOOTARGS
-#define CONFIG_RAMBOOTCOMMAND							\
-	"setenv bootargs root=/dev/ram rw nfsroot=${serverip}:${rootpath} "	\
-	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;"	\
-	"bootm ffc00000 ffca0000"
-#define CONFIG_NFSBOOTCOMMAND							\
-	"setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} "	\
-	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;"	\
-	"bootm ffc00000"
-#define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND
+
+#define CFG_USB_LOAD_COMMAND	"fatload usb 0 200000 pImage;"		\
+				"fatload usb 0 300000 pImage.initrd"
+#define CFG_USB_SELF_COMMAND	"usb start;run usb_load;usb stop;"	\
+				"run ramargs addip addcon usbargs;"	\
+				"bootm 200000 300000"
+#define CFG_USB_ARGS		"setenv bootargs $(bootargs) usbboot=1"
+
+#define CONFIG_EXTRA_ENV_SETTINGS                                       \
+        "hostname=abg405\0"                                             \
+        "bd_type=abg405\0"                                              \
+	"serial#=AA0000\0"                                              \
+        "kernel_addr=fe000000\0"                                        \
+        "ramdisk_addr=fe100000\0"                                       \
+        "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
+        "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
+                "nfsroot=$(serverip):$(rootpath)\0"                     \
+        "addip=setenv bootargs $(bootargs) "                            \
+                "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)"      \
+                ":$(hostname)::off panic=1\0"                           \
+        "addcon=setenv bootargs $(bootargs) console=ttyS0,$(baudrate)"  \
+                " $(optargs)\0"                                         \
+        "flash_self=run ramargs addip addcon;"                          \
+                "bootm $(kernel_addr) $(ramdisk_addr)\0"                \
+        "net_nfs=tftp 200000 $(img);run nfsargs addip addcon;"          \
+                "bootm\0"                                               \
+        "rootpath=/tftpboot/abg405/target_root\0"                       \
+        "img=/tftpboot/abg405/pImage\0"                                 \
+        "load=tftp 100000 /tftpboot/abg405/u-boot.bin\0"		\
+        "update=protect off fff80000 ffffffff;era fff80000 ffffffff;"   \
+                "cp.b 100000 fff80000 80000\0"                          \
+        "ipaddr=10.0.111.111\0"                                         \
+        "netmask=255.255.0.0\0"                                         \
+        "serverip=10.0.0.190\0"						\
+        "splashimage=ffe80000\0"                                        \
+	"usb_load="CFG_USB_LOAD_COMMAND"\0"				\
+	"usb_self="CFG_USB_SELF_COMMAND"\0"				\
+	"usbargs="CFG_USB_ARGS"\0"					\
+        ""
+#define CONFIG_BOOTCOMMAND	"run flash_self;run usb_self"
+
+#define CONFIG_ETHADDR		00:02:27:8e:00:00
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
 #define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
+#define CONFIG_NET_MULTI	1
+#undef  CONFIG_HAS_ETH1
+
 #define CONFIG_MII		1	/* MII PHY management		*/
-#define	CONFIG_PHY_ADDR		0	/* PHY address			*/
-#define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
+#define CONFIG_PHY_ADDR		0	/* PHY address			*/
+#define CONFIG_LXT971_NO_SLEEP	1
+#define CONFIG_RESET_PHY_R	1	/* use reset_phy() */
 
 #define CONFIG_PHY_CLK_FREQ	EMAC_STACR_CLK_66MHZ /* 66 MHz OPB clock*/
 
-
 /*
  * BOOTP options
  */
@@ -76,7 +114,6 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
-
 /*
  * Command line configuration.
  */
@@ -93,95 +130,86 @@
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_USB
+#define CONFIG_CMD_AUTOSCRIPT
 
 #define CONFIG_MAC_PARTITION
 #define CONFIG_DOS_PARTITION
 
 #define CONFIG_SUPPORT_VFAT
 
-#undef  CONFIG_WATCHDOG			/* watchdog disabled		*/
+#define CONFIG_AUTO_UPDATE	1	/* autoupdate via CF or USB */
 
-#define CONFIG_RTC_MC146818             /* DS1685 is MC146818 compatible*/
-#define CFG_RTC_REG_BASE_ADDR	 0xF0000500 /* RTC Base Address         */
+#undef  CONFIG_WATCHDOG			/* watchdog disabled */
 
-#define	CONFIG_SDRAM_BANK0	1	/* init onboard SDRAM bank 0	*/
+#define CONFIG_RTC_MC146818		/* DS1685 is MC146818 compatible*/
+#define CFG_RTC_REG_BASE_ADDR 0xF0000500 /* RTC Base Address */
+
+#define CONFIG_SDRAM_BANK0	1	/* init onboard SDRAM bank 0 */
 
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
-
-#undef	CFG_HUSH_PARSER			/* use "hush" command parser	*/
-#ifdef	CFG_HUSH_PARSER
-#define	CFG_PROMPT_HUSH_PS2	"> "
-#endif
+#define CFG_LONGHELP			/* undef to save memory */
+#define CFG_PROMPT	"=> "		/* Monitor Command Prompt */
+#define CONFIG_CMDLINE_EDITING	1	/* add command line history */
 
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define CFG_CBSIZE	1024		/* Console I/O Buffer Size */
 #else
-#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CFG_CBSIZE	256		/* Console I/O Buffer Size */
 #endif
 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CFG_MAXARGS	16		/* max number of command args */
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
 
-#define CFG_DEVICE_NULLDEV      1       /* include nulldev device       */
+#define CFG_DEVICE_NULLDEV	1	/* include nulldev device */
 
-#define CFG_CONSOLE_INFO_QUIET  1       /* don't print console @ startup*/
+#define CFG_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CFG_MEMTEST_START	0x0400000 /* memtest works on */
+#define CFG_MEMTEST_END		0x0C00000 /* 4 ... 12 MB in DRAM */
 
-#if 1 /* test-only */
 #define CFG_EXT_SERIAL_CLOCK    14745600 /* use external serial clock   */
-#else
-#undef  CFG_EXT_SERIAL_CLOCK           /* no external serial clock used */
-#define CFG_IGNORE_405_UART_ERRATA_59   /* ignore ppc405gp errata #59   */
-#define CFG_BASE_BAUD       691200
-#endif
 
 /* The following table includes the supported baudrates */
 #define CFG_BAUDRATE_TABLE      \
-	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
+	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \
 	 57600, 115200, 230400, 460800, 921600 }
 
 #define CFG_LOAD_ADDR	0x100000	/* default load address */
 #define CFG_EXTBDINFO	1		/* To use extended board_into (bd_t) */
 
-#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
+#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
 
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
 
 /* Only interrupt boot if space is pressed */
 /* If a long serial cable is connected but */
 /* other end is dead, garbage will be read */
-#define CONFIG_AUTOBOOT_KEYED 1
-#define CONFIG_AUTOBOOT_PROMPT "Press SPACE to abort autoboot in %d seconds\n"
-#define CONFIG_AUTOBOOT_DELAY_STR "d"
+#define CONFIG_AUTOBOOT_KEYED	1
+#define CONFIG_AUTOBOOT_PROMPT	"Press SPACE to abort autoboot in %d seconds\n"
+#undef CONFIG_AUTOBOOT_DELAY_STR
 #define CONFIG_AUTOBOOT_STOP_STR " "
 
-#define CONFIG_VERSION_VARIABLE	1       /* include version env variable */
+#define CONFIG_VERSION_VARIABLE	1	/* include version env variable */
 
-#define CFG_RX_ETH_BUFFER	16      /* use 16 rx buffer on 405 emac */
+#define CFG_RX_ETH_BUFFER	16	/* use 16 rx buffer on 405 emac */
 
-/*-----------------------------------------------------------------------
+/*
  * PCI stuff
- *-----------------------------------------------------------------------
  */
-#define PCI_HOST_ADAPTER 0              /* configure as pci adapter     */
-#define PCI_HOST_FORCE  1               /* configure as pci host        */
-#define PCI_HOST_AUTO   2               /* detected via arbiter enable  */
+#define PCI_HOST_ADAPTER	0	/* configure as pci adapter     */
+#define PCI_HOST_FORCE		1	/* configure as pci host        */
+#define PCI_HOST_AUTO		2	/* detected via arbiter enable  */
 
-#define CONFIG_PCI			/* include pci support	        */
-#define CONFIG_PCI_HOST	PCI_HOST_FORCE  /* select pci host function     */
+#define CONFIG_PCI			/* include pci support          */
+#define CONFIG_PCI_HOST PCI_HOST_FORCE	/* select pci host function     */
 #define CONFIG_PCI_PNP			/* do pci plug-and-play         */
 					/* resource configuration       */
 
-#define CONFIG_PCI_SCAN_SHOW            /* print pci devices @ startup  */
-
-#define CONFIG_PCI_CONFIG_HOST_BRIDGE 1 /* don't skip host bridge config*/
-
+#define CONFIG_PCI_SCAN_SHOW		/* print pci devices @ startup  */
+#define CONFIG_PCI_SKIP_HOST_BRIDGE 1
 #define CFG_PCI_SUBSYS_VENDORID 0x12FE  /* PCI Vendor ID: esd gmbh      */
 #define CFG_PCI_SUBSYS_DEVICEID 0x0405  /* PCI Device ID: CPCI-405      */
 #define CFG_PCI_CLASSCODE       0x0b20  /* PCI Class Code: Processor/PPC*/
@@ -192,119 +220,123 @@
 #define CFG_PCI_PTM2MS  0xffc00001      /* 4MB, enable                  */
 #define CFG_PCI_PTM2PCI 0x04000000      /* Host: use this pci address   */
 
-/*-----------------------------------------------------------------------
+/*
  * IDE/ATA stuff
- *-----------------------------------------------------------------------
  */
-#undef  CONFIG_IDE_8xx_DIRECT               /* no pcmcia interface required */
-#undef  CONFIG_IDE_LED                  /* no led for ide supported     */
-#define CONFIG_IDE_RESET	1	/* reset for ide supported	*/
+#undef  CONFIG_IDE_8xx_DIRECT		/* no pcmcia interface required */
+#undef  CONFIG_IDE_LED			/* no led for ide supported */
+#define CONFIG_IDE_RESET	1	/* reset for ide supported */
 
-#define	CFG_IDE_MAXBUS	        1		/* max. 1 IDE busses	*/
-#define	CFG_IDE_MAXDEVICE	(CFG_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */
+#define CFG_IDE_MAXBUS		1		/* max. 1 IDE busses */
+#define CFG_IDE_MAXDEVICE	(CFG_IDE_MAXBUS) /* max. 1 drives per IDE bus */
 
-#define	CFG_ATA_BASE_ADDR	0xF0100000
-#define	CFG_ATA_IDE0_OFFSET	0x0000
+#define CFG_ATA_BASE_ADDR	0xF0100000
+#define CFG_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_DATA_OFFSET	0x0000	/* Offset for data I/O			*/
-#define	CFG_ATA_REG_OFFSET	0x0000	/* Offset for normal register accesses	*/
-#define CFG_ATA_ALT_OFFSET	0x0000	/* Offset for alternate registers	*/
+#define CFG_ATA_DATA_OFFSET	0x0000	/* Offset for data I/O */
+#define CFG_ATA_REG_OFFSET	0x0000	/* Offset for normal register access */
+#define CFG_ATA_ALT_OFFSET	0x0000	/* Offset for alternate registers */
 
-/*-----------------------------------------------------------------------
+/*
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
  * Please note that CFG_SDRAM_BASE _must_ start at 0
  */
 #define CFG_SDRAM_BASE		0x00000000
 #define CFG_MONITOR_BASE	0xFFF80000
-#define CFG_MONITOR_LEN		(512 * 1024)	/* Reserve 512 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(2*1024*1024)	/* Reserve 2MB for malloc()	*/
+#define CFG_MONITOR_LEN		(512 * 1024)	/* Reserve 512 kB for Monitor */
+#define CFG_MALLOC_LEN		(2*1024*1024)	/* Reserve 2MB for malloc() */
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CFG_BOOTMAPSZ		(8 << 20)	/* Init. Memory map for Linux */
 
-/*-----------------------------------------------------------------------
+/*
  * FLASH organization
  */
-#define CFG_FLASH_CFI		1	/* Flash is CFI conformant		*/
-#define CFG_MAX_FLASH_SECT	128	/* max number of sectors on one chip	*/
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#undef CFG_FLASH_PROTECTION		/* don't use hardware protection	*/
-#define CFG_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
-#define CFG_FLASH_BASE		0xFE000000 /* test-only...*/
-#define CFG_FLASH_INCREMENT	0x01000000 /* test-only */
-
-#define CFG_FLASH_EMPTY_INFO            /* print 'E' for empty sector on flinfo */
+#ifndef __ASSEMBLY__
+extern int flash_banks;
+#endif
 
-#define CFG_JFFS2_FIRST_BANK    0           /* use for JFFS2 */
-#define CFG_JFFS2_NUM_BANKS     1           /* ! second bank contains u-boot    */
+#define CFG_FLASH_BASE		0xFE000000
+#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER	1	/* Use the common driver */
+#define CFG_MAX_FLASH_SECT	256	/* max num of sects on one chip */
+#define CFG_MAX_FLASH_BANKS	flash_banks /* max num of flash banks */
+					    /* updated in board_early_init_r */
+#define CFG_MAX_FLASH_BANKS_DETECT 2
+#define CFG_FLASH_QUIET_TEST	1
+#define CFG_FLASH_INCREMENT	0x01000000
+#define CFG_FLASH_PROTECTION	1	/* use hardware protection */
+#define CFG_FLASH_AUTOPROTECT_LIST { \
+				{0xfe000000, 0x500000}, \
+				{0xffe80000, 0x180000} \
+				}
+#define CFG_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster) */
+#define CFG_FLASH_BANKS_LIST	{ \
+				CFG_FLASH_BASE, \
+				CFG_FLASH_BASE + CFG_FLASH_INCREMENT \
+				}
+#define CFG_FLASH_EMPTY_INFO	/* print 'E' for empty sector on flinfo */
 
-/*-----------------------------------------------------------------------
+/*
  * Environment Variable setup
  */
-#define CFG_ENV_IS_IN_EEPROM    1       /* use EEPROM for environment vars */
-#define CFG_ENV_OFFSET          0x000   /* environment starts at the beginning of the EEPROM */
-#define CFG_ENV_SIZE            0x800   /* 2048 bytes may be used for env vars*/
-				   /* total size of a CAT24WC16 is 2048 bytes */
+#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
+#define CFG_ENV_OFFSET		0x000	/* environment starts at the */
+					/* beginning of the EEPROM */
+#define CFG_ENV_SIZE		0x800	/* 2048 bytes may be used for env vars*/
+#define CONFIG_ENV_OVERWRITE	1	/* allow overwriting vendor vars */
 
-#define CFG_NVRAM_BASE_ADDR	0xF0000500		/* NVRAM base address	*/
-#define CFG_NVRAM_SIZE		242		        /* NVRAM size		*/
+#define CFG_NVRAM_BASE_ADDR	0xF0000500	/* NVRAM base address */
+#define CFG_NVRAM_SIZE		242		/* NVRAM size */
 
-/*-----------------------------------------------------------------------
+/*
  * I2C EEPROM (CAT24WC16) for environment
  */
 #define CONFIG_HARD_I2C			/* I2c with hardware support */
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CFG_I2C_SPEED		100000	/* I2C speed and slave address */
 #define CFG_I2C_SLAVE		0x7F
 
-#define CFG_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
-#define CFG_I2C_EEPROM_ADDR_LEN	1	/* Bytes of address		*/
-/* mask of address bits that overflow into the "EEPROM chip address"    */
+#define CFG_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08 */
+#define CFG_I2C_EEPROM_ADDR_LEN	1	/* Bytes of address */
+/* mask of address bits that overflow into the "EEPROM chip address" */
 #define CFG_I2C_EEPROM_ADDR_OVERFLOW	0x07
-#define CFG_EEPROM_PAGE_WRITE_BITS 4	/* The Catalyst CAT24WC08 has	*/
+#define CFG_EEPROM_PAGE_WRITE_BITS 4	/* The Catalyst CAT24WC08 has */
 					/* 16 byte page write mode using*/
-					/* last	4 bits of the address	*/
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
+					/* last	4 bits of the address */
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10 /* and takes up to 10 msec */
 #define CFG_EEPROM_PAGE_WRITE_ENABLE
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		16384	/* For AMCC 405 CPUs, older 405 ppc's   */
-					/* have only 8kB, 16kB is save here     */
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
-/*-----------------------------------------------------------------------
+/*
  * External Bus Controller (EBC) Setup
  */
-#define FLASH0_BA       0xFF000000          /* FLASH 0 Base Address             */
-#define FLASH1_BA       0xFE000000          /* FLASH 1 Base Address             */
-#define CAN_BA          0xF0000000          /* CAN Base Address                 */
-#define DUART0_BA       0xF0000400          /* DUART Base Address               */
-#define DUART1_BA       0xF0000408          /* DUART Base Address               */
-#define RTC_BA          0xF0000500          /* RTC Base Address                 */
-#define PS2_BA          0xF0000600          /* PS/2 Base Address                */
-#define CF_BA           0xF0100000          /* CompactFlash Base Address        */
-#define FPGA_BA         0xF0100100          /* FPGA internal Base Address       */
-#define FUJI_BA         0xF0100200          /* Fuji internal Base Address       */
-#define PCMCIA1_BA      0x20000000          /* PCMCIA Slot 1 Base Address       */
-#define PCMCIA2_BA      0x28000000          /* PCMCIA Slot 2 Base Address       */
-#define VGA_BA          0xF1000000          /* Epson VGA Base Address           */
-
-#define CFG_FPGA_BASE_ADDR      FPGA_BA     /* FPGA internal Base Address       */
-
-/* Memory Bank 0 (Flash Bank 0) initialization                                  */
+#define FLASH0_BA       (CFG_FLASH_BASE + CFG_FLASH_INCREMENT) /* FLASH 0 BA */
+#define FLASH1_BA       CFG_FLASH_BASE      /* FLASH 1 Base Address          */
+#define CAN_BA          0xF0000000          /* CAN Base Address              */
+#define DUART0_BA       0xF0000400          /* DUART Base Address            */
+#define DUART1_BA       0xF0000408          /* DUART Base Address            */
+#define RTC_BA          0xF0000500          /* RTC Base Address              */
+#define PS2_BA          0xF0000600          /* PS/2 Base Address             */
+#define CF_BA           0xF0100000          /* CompactFlash Base Address     */
+#define FPGA_BA         0xF0100100          /* FPGA internal Base Address    */
+#define FUJI_BA         0xF0100200          /* Fuji internal Base Address    */
+#define PCMCIA1_BA      0x20000000          /* PCMCIA Slot 1 Base Address    */
+#define PCMCIA2_BA      0x28000000          /* PCMCIA Slot 2 Base Address    */
+#define VGA_BA          0xF1000000          /* Epson VGA Base Address        */
+
+#define CFG_FPGA_BASE_ADDR      FPGA_BA     /* FPGA internal Base Address    */
+
+/* Memory Bank 0 (Flash Bank 0) initialization                               */
 #define CFG_EBC_PB0AP   0x92015480
 #define CFG_EBC_PB0CR   FLASH0_BA | 0x9A000 /* BAS=0xFF0,BS=16MB,BU=R/W,BW=16bit*/
+#define CFG_EBC_PB0AP_HWREV8 CFG_EBC_PB0AP
+#define CFG_EBC_PB0CR_HWREV8 FLASH1_BA | 0xBA000 /* BS=32MB */
 
-/* Memory Bank 1 (Flash Bank 1) initialization                                  */
+/* Memory Bank 1 (Flash Bank 1) initialization                               */
 #define CFG_EBC_PB1AP   0x92015480
 #define CFG_EBC_PB1CR   FLASH1_BA | 0x9A000 /* BAS=0xFE0,BS=16MB,BU=R/W,BW=16bit*/
 
@@ -328,7 +360,7 @@
 #define CFG_EBC_PB6AP   0x050007C0   /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
 #define CFG_EBC_PB6CR   PCMCIA2_BA | 0xFA000 /*BAS=0x280,BS=128MB,BU=R/W,BW=16bit*/
 
-/*-----------------------------------------------------------------------
+/*
  * FPGA stuff
  */
 
@@ -351,48 +383,56 @@
 #define CFG_FPGA_INIT           0x00010000  /* FPGA init pin (ppc input)     */
 #define CFG_FPGA_DONE           0x00008000  /* FPGA done pin (ppc input)     */
 
-/*-----------------------------------------------------------------------
+/*
  * LCD Setup
  */
+#define CFG_LCD_BIG_MEM		(VGA_BA + 0x200000) /* S1D13806 Mem Base */
+#define CFG_LCD_BIG_REG		VGA_BA /* S1D13806 Reg Base */
 
-#define CFG_LCD_BIG_MEM         0xF1200000  /* Epson S1D13806 Mem Base Address  */
-#define CFG_LCD_BIG_REG         0xF1000000  /* Epson S1D13806 Reg Base Address  */
-
-#define CONFIG_LCD_BIG          2           /* Epson S1D13806 used              */
+#define CONFIG_LCD_BIG		2 /* Epson S1D13806 used */
 
 /* Image information... */
-#define CONFIG_LCD_USED         CONFIG_LCD_BIG
-#define CFG_LCD_HEADER_NAME     "../common/s1d13806_640_480_16bpp.h"
-#define CFG_LCD_LOGO_NAME       "logo_640_480_24bpp.c"
+#define CONFIG_LCD_USED		CONFIG_LCD_BIG
 
-#define CFG_LCD_MEM             CFG_LCD_BIG_MEM
-#define CFG_LCD_REG             CFG_LCD_BIG_REG
+#define CFG_LCD_MEM		CFG_LCD_BIG_MEM
+#define CFG_LCD_REG		CFG_LCD_BIG_REG
 
 #define CFG_VIDEO_LOGO_MAX_SIZE (1 << 20)
 
-/*-----------------------------------------------------------------------
+/*
  * Definitions for initial stack pointer and data area (in data cache)
  */
 
 /* use on chip memory ( OCM ) for temperary stack until sdram is tested */
-#define CFG_TEMP_STACK_OCM        1
+#define CFG_TEMP_STACK_OCM	1
 
 /* On Chip Memory location */
 #define CFG_OCM_DATA_ADDR	0xF8000000
 #define CFG_OCM_DATA_SIZE	0x1000
 
-#define CFG_INIT_RAM_ADDR	CFG_OCM_DATA_ADDR /* inside of SDRAM		*/
-#define CFG_INIT_RAM_END	CFG_OCM_DATA_SIZE /* End of used area in RAM	*/
-#define CFG_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET    (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET      CFG_GBL_DATA_OFFSET
+#define CFG_INIT_RAM_ADDR	CFG_OCM_DATA_ADDR /* inside of SDRAM */
+#define CFG_INIT_RAM_END	CFG_OCM_DATA_SIZE /* End of used area in RAM */
+#define CFG_GBL_DATA_SIZE	128 /* reserved bytes for initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
 
 /*
  * Internal Definitions
  *
  * Boot Flags
  */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
+#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM	0x02		/* Software reboot */
 
-#endif	/* __CONFIG_H */
+/*
+ * PCI OHCI controller
+ */
+#define CONFIG_USB_OHCI_NEW	1
+#define CONFIG_PCI_OHCI		1
+#define CFG_OHCI_SWAP_REG_ACCESS 1
+#define CFG_USB_OHCI_MAX_ROOT_PORTS 15
+#define CFG_USB_OHCI_SLOT_NAME	"ohci_pci"
+#define CONFIG_USB_STORAGE	1
+#define CFG_USB_OHCI_BOARD_INIT 1
+
+#endif /* __CONFIG_H */