ENGR00238834: mx6solo: add MFG support for mx6solo sabresd board

add MFG support for mx6solo sabresd board

Signed-off-by: Jason Liu <r64343@freescale.com>

1 files changed, 303 insertions, 0 deletions

diff --git a/include/configs/mx6solo_sabresd_mfg.h b/include/configs/mx6solo_sabresd_mfg.h
new file mode 100644
index 0000000..2b3ccf0
--- /dev/null
+++ b/include/configs/mx6solo_sabresd_mfg.h
@@ -0,0 +1,303 @@
+/*
+ * Copyright (C) 2012-2013 Freescale Semiconductor, Inc.
+ *
+ * Configuration settings for the MX6SOLO SabreSD Freescale board.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/arch/mx6.h>
+
+ /* High Level Configuration Options */
+#define CONFIG_MFG
+#define CONFIG_ARMV7	/* This is armv7 Cortex-A9 CPU core */
+#define CONFIG_MXC
+#define CONFIG_MX6DL
+#define CONFIG_MX6DL_DDR3
+#define CONFIG_MX6DL_SABRESD
+#define CONFIG_DDR_32BIT /* for DDR 32bit */
+#define CONFIG_FLASH_HEADER
+#define CONFIG_FLASH_HEADER_OFFSET 0x400
+#define CONFIG_MX6_CLK32	   32768
+
+#define CONFIG_SKIP_RELOCATE_UBOOT
+
+#define CONFIG_ARCH_CPU_INIT
+#undef CONFIG_ARCH_MMU /* disable MMU first */
+#define CONFIG_L2_OFF  /* disable L2 cache first*/
+
+#define CONFIG_MX6_HCLK_FREQ	24000000
+
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+#define CONFIG_SYS_64BIT_VSPRINTF
+
+#define BOARD_LATE_INIT
+
+#define CONFIG_CMDLINE_TAG	/* enable passing of ATAGs */
+#define CONFIG_SERIAL_TAG
+#define CONFIG_REVISION_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+
+#define CONFIG_MXC_GPIO
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN		(2 * 1024 * 1024)
+/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_SIZE	128
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_MXC_UART
+#define CONFIG_UART_BASE_ADDR   UART1_BASE_ADDR
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_CONS_INDEX		1
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_SYS_BAUDRATE_TABLE	{9600, 19200, 38400, 57600, 115200}
+
+/***********************************************************
+ * Command definition
+ ***********************************************************/
+
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_NET_RETRY_COUNT  100
+#define CONFIG_NET_MULTI 1
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_DNS
+
+#define CONFIG_CMD_SPI
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IMXOTP
+
+/* Enable below configure when supporting nand */
+#define CONFIG_CMD_SF
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_REGUL
+
+#define CONFIG_CMD_CLOCK
+#define CONFIG_REF_CLK_FREQ CONFIG_MX6_HCLK_FREQ
+
+#undef CONFIG_CMD_IMLS
+
+#define CONFIG_BOOTDELAY 0
+
+#define CONFIG_PRIME	"FEC0"
+
+#define CONFIG_LOADADDR		0x10800000	/* loadaddr env var */
+#define CONFIG_RD_LOADADDR	(CONFIG_LOADADDR + 0x300000)
+
+#define CONFIG_BOOTARGS         "console=ttymxc0,115200 rdinit=/linuxrc "\
+				"enable_wait_mode=off nosmp"
+#define CONFIG_BOOTCOMMAND      "bootm 0x10800000 0x10c00000"
+
+#define	CONFIG_EXTRA_ENV_SETTINGS					\
+		"netdev=eth0\0"						\
+		"ethprime=FEC0\0"					\
+		"uboot=u-boot.bin\0"			\
+		"kernel=uImage\0"				\
+
+#define CONFIG_ARP_TIMEOUT	200UL
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
+#define CONFIG_SYS_PROMPT		"MX6Solo SABRESD-MFG U-Boot > "
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS	16	/* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
+
+#define CONFIG_SYS_MEMTEST_START	0x10000000	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x10010000
+
+#undef	CONFIG_SYS_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+
+#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
+
+#define CONFIG_SYS_HZ			1000
+
+#define CONFIG_CMDLINE_EDITING
+
+#define CONFIG_FEC0_IOBASE	ENET_BASE_ADDR
+#define CONFIG_FEC0_PINMUX	-1
+#define CONFIG_FEC0_MIIBASE	-1
+#define CONFIG_GET_FEC_MAC_ADDR_FROM_IIM
+#define CONFIG_MXC_FEC
+#define CONFIG_FEC0_PHY_ADDR		1
+#define CONFIG_ETH_PRIME
+#define CONFIG_RMII
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PING
+#define CONFIG_IPADDR			192.168.1.103
+#define CONFIG_SERVERIP			192.168.1.101
+#define CONFIG_NETMASK			255.255.255.0
+
+/*
+ * OCOTP Configs
+ */
+#ifdef CONFIG_CMD_IMXOTP
+	#define CONFIG_IMX_OTP
+	#define IMX_OTP_BASE			OCOTP_BASE_ADDR
+	#define IMX_OTP_ADDR_MAX		0x7F
+	#define IMX_OTP_DATA_ERROR_VAL	0xBADABADA
+#endif
+
+/*
+ * I2C Configs
+ */
+#ifdef CONFIG_CMD_I2C
+	#define CONFIG_HARD_I2C         1
+	#define CONFIG_I2C_MXC          1
+	#define CONFIG_SYS_I2C_PORT             I2C3_BASE_ADDR
+	#define CONFIG_SYS_I2C_SPEED            100000
+	#define CONFIG_SYS_I2C_SLAVE            0x1f
+#endif
+
+/*
+ * SPI Configs
+ */
+#ifdef CONFIG_CMD_SF
+	#define CONFIG_FSL_SF		1
+	#define CONFIG_SPI_FLASH_IMX_M25PXX	1
+	#define CONFIG_SPI_FLASH_CS	1
+	#define CONFIG_IMX_ECSPI
+	#define IMX_CSPI_VER_2_3	1
+	#define MAX_SPI_BYTES		(64 * 4)
+#endif
+
+/* Regulator Configs */
+#ifdef CONFIG_CMD_REGUL
+	#define CONFIG_ANATOP_REGULATOR
+	#define CONFIG_CORE_REGULATOR_NAME "vdd1p1"
+	#define CONFIG_PERIPH_REGULATOR_NAME "vdd1p1"
+#endif
+
+/*
+ * MMC Configs
+ */
+#ifdef CONFIG_CMD_MMC
+	#define CONFIG_MMC
+	#define CONFIG_GENERIC_MMC
+	#define CONFIG_IMX_MMC
+	#define CONFIG_SYS_FSL_USDHC_NUM        4
+	#define CONFIG_SYS_FSL_ESDHC_ADDR       0
+	#define CONFIG_SYS_MMC_ENV_DEV  2
+	#define CONFIG_DOS_PARTITION	1
+	#define CONFIG_CMD_FAT		1
+	#define CONFIG_CMD_EXT2		1
+
+	/* detect whether SD1, 2, 3, or 4 is boot device */
+	#define CONFIG_DYNAMIC_MMC_DEVNO
+
+	/* SD3 and SD4 are 8 bit */
+	#define CONFIG_MMC_8BIT_PORTS   0xC
+	/* Setup target delay in DDR mode for each SD port */
+	#define CONFIG_GET_DDR_TARGET_DELAY
+#endif
+
+/*
+ * GPMI Nand Configs
+ */
+/* #define CONFIG_CMD_NAND */
+
+#ifdef CONFIG_CMD_NAND
+	#define CONFIG_NAND_GPMI
+	#define CONFIG_GPMI_NFC_SWAP_BLOCK_MARK
+	#define CONFIG_GPMI_NFC_V2
+
+	#define CONFIG_GPMI_REG_BASE	GPMI_BASE_ADDR
+	#define CONFIG_BCH_REG_BASE	BCH_BASE_ADDR
+
+	#define NAND_MAX_CHIPS		8
+	#define CONFIG_SYS_NAND_BASE		0x40000000
+	#define CONFIG_SYS_MAX_NAND_DEVICE	1
+
+	/* NAND is the unique module invoke APBH-DMA */
+	#define CONFIG_APBH_DMA
+	#define CONFIG_APBH_DMA_V2
+	#define CONFIG_MXS_DMA_REG_BASE	ABPHDMA_BASE_ADDR
+#endif
+
+/*-----------------------------------------------------------------------
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE	(128 * 1024)	/* regular stack */
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS	1
+#define PHYS_SDRAM_1		CSD0_DDR_BASE_ADDR
+#define PHYS_SDRAM_1_SIZE	(512 * 1024 * 1024)
+#define iomem_valid_addr(addr, size) \
+	(addr >= PHYS_SDRAM_1 && addr <= (PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE))
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+#define CONFIG_SYS_NO_FLASH
+
+/* Monitor at beginning of flash */
+/* #define CONFIG_FSL_ENV_IN_MMC */
+/* #define CONFIG_FSL_ENV_IN_NAND */
+/* #define CONFIG_FSL_ENV_IN_SATA */
+
+#define CONFIG_ENV_SECT_SIZE    (128 * 1024)
+#define CONFIG_ENV_SIZE         CONFIG_ENV_SECT_SIZE
+#define CONFIG_ENV_IS_NOWHERE   1
+
+#ifdef CONFIG_SPLASH_SCREEN
+	/*
+	 * Framebuffer and LCD
+	 */
+	#define CONFIG_LCD
+	#define CONFIG_IPU_V3H
+	#define CONFIG_VIDEO_MX5
+	#define CONFIG_IPU_CLKRATE	260000000
+	#define CONFIG_SYS_CONSOLE_ENV_OVERWRITE
+	#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
+	#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+	#define LCD_BPP		LCD_COLOR16
+	#define CONFIG_CMD_BMP
+	#define CONFIG_BMP_8BPP
+	#define CONFIG_FB_BASE	(TEXT_BASE + 0x300000)
+	#define CONFIG_SPLASH_SCREEN_ALIGN
+	#define CONFIG_SYS_WHITE_ON_BLACK
+#endif
+#endif				/* __CONFIG_H */