powerpc, keymile boards: extract identical config options

This patch extracts the identical config options for the
keymile boards mgcoge, mgsuvd and kmeter1 in a new
common config file keymile-common.h.

Signed-off-by: Heiko Schocher <hs@denx.de>

4 files changed, 120 insertions, 216 deletions

diff --git a/include/configs/keymile-common.h b/include/configs/keymile-common.h
new file mode 100644
index 0000000..d70bc48
--- /dev/null
+++ b/include/configs/keymile-common.h
@@ -0,0 +1,113 @@
+/*
+ * (C) Copyright 2008
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_KEYMILE_H
+#define __CONFIG_KEYMILE_H
+
+/* Do boardspecific init for all boards */
+#define CONFIG_BOARD_EARLY_INIT_R       1
+
+#if defined(CONFIG_MGCOGE) || defined(CONFIG_MGSUVD)
+#define CONFIG_BOOTCOUNT_LIMIT
+#endif
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+
+/* should go away, if kmeter I2C support is enabled */
+#if defined(CONFIG_MGCOGE) || defined(CONFIG_MGSUVD)
+#define CONFIG_CMD_DTT
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+#endif
+
+#undef	CONFIG_WATCHDOG			/* disable platform specific watchdog */
+
+#define CONFIG_BOOTCOMMAND	"run net_nfs"
+#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds */
+#undef	CONFIG_BOOTARGS			/* the boot command will set bootargs */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_LONGHELP			/* undef to save memory	    */
+#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt   */
+#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size  */
+#else
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size  */
+#endif
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size  */
+#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size  */
+#define CONFIG_CMDLINE_EDITING		1	/* add command line history     */
+
+/* should go away, if kmeter I2C support is enabled */
+#if defined(CONFIG_MGCOGE) || defined(CONFIG_MGSUVD)
+#define CONFIG_HUSH_INIT_VAR	1
+#endif
+
+#define CONFIG_SYS_ALT_MEMTEST		/* memory test, takes time */
+#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
+
+#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
+
+#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
+
+#define CONFIG_BAUDRATE		115200
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
+
+/*
+ * How to get access to the slot ID.  Put this here to make it easy
+ * to modify in a centralized location.  This is used in the HDLC
+ * driver to set the MAC.
+*/
+#define CONFIG_CHECK_ETHERNET_PRESENT	1
+#define CONFIG_SYS_SLOT_ID_BASE		CONFIG_SYS_PIGGY_BASE
+#define CONFIG_SYS_SLOT_ID_OFF		(0x07)	/* register offset */
+#define CONFIG_SYS_SLOT_ID_MASK		(0x3f)	/* mask for slot ID bits */
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+#endif /* __CONFIG_KEYMILE_H */
diff --git a/include/configs/kmeter1.h b/include/configs/kmeter1.h
index 7a63a41..25b1c17 100644
--- a/include/configs/kmeter1.h
+++ b/include/configs/kmeter1.h
@@ -29,6 +29,9 @@
 #define CONFIG_MPC8360		1 /* MPC8360 CPU specific */
 #define CONFIG_KMETER1		1 /* KMETER1 board specific */
 
+/* include common defines/options for all Keymile boards */
+#include "keymile-common.h"
+
 /*
  * System Clock Setup
  */
@@ -60,8 +63,6 @@
 #define CONFIG_SYS_SICRH		0x00000006
 #define CONFIG_SYS_SICRL		0x00000000
 
-#define CONFIG_BOARD_EARLY_INIT_R
-
 /*
  * IMMR new address
  */
@@ -135,13 +136,6 @@
 #define CONFIG_SYS_DDR_TIMING_3	0x00000000
 
 /*
- * Memory test
- */
-#define CONFIG_SYS_ALT_MEMTEST		/* memory test, takes time */
-#define CONFIG_SYS_MEMTEST_START	0x00100000 /* memtest region */
-#define CONFIG_SYS_MEMTEST_END		0x00F00000
-
-/*
  * The reserved memory
  */
 #define CONFIG_SYS_MONITOR_BASE	TEXT_BASE /* start of monitor */
@@ -249,9 +243,6 @@
 #define CONFIG_SYS_NS16550_REG_SIZE	1
 #define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
 
-#define CONFIG_SYS_BAUDRATE_TABLE	\
-	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200,}
-
 #define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_IMMR+0x4500)
 #define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_IMMR+0x4600)
 
@@ -269,7 +260,6 @@
 #ifndef CONFIG_NET_MULTI
 #define CONFIG_NET_MULTI	1
 #endif
-
 /*
  * QE UEC ethernet configuration
  */
@@ -310,37 +300,6 @@
 #define CONFIG_ENV_SIZE		0x2000
 #endif /* CFG_RAMBOOT */
 
-#define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
-
-/*
- * How to get access to the slot ID.  Put this here to make it easy
- * to modify in a centralized location.  This is used in the HDLC
- * driver to set the MAC.
-*/
-#define CONFIG_SYS_SLOT_ID_BASE		CONFIG_SYS_PIGGY_BASE
-#define CONFIG_SYS_SLOT_ID_OFF		(0x07)	/* register offset */
-#define CONFIG_SYS_SLOT_ID_MASK		(0x3f)	/* mask for slot ID bits */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-
 #if defined(CONFIG_PCI)
 #define CONFIG_CMD_PCI
 #endif
@@ -350,28 +309,6 @@
 #undef CONFIG_CMD_LOADS
 #endif
 
-#undef CONFIG_WATCHDOG		/* watchdog disabled */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
-#define CONFIG_SYS_LONGHELP			/* undef to save memory	    */
-#define CONFIG_SYS_LOAD_ADDR		0x200000 /* default load address */
-#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt   */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size  */
-#else
-#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size  */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
-#define CONFIG_CMDLINE_EDITING	1	/* add command line history */
-
-#define CONFIG_SYS_HZ			1000
-
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
@@ -464,11 +401,6 @@
 #define BOOTFLAG_COLD	0x01 /* Normal Power-On: Boot from FLASH */
 #define BOOTFLAG_WARM	0x02 /* Software reboot */
 
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
-#endif
-
 /*
  * Environment Configuration
  */
@@ -478,11 +410,6 @@
 #define CONFIG_HAS_ETH0
 #endif
 
-#define CONFIG_BAUDRATE 115200
-
-#define	CONFIG_BOOTDELAY	5	/* -1 disables auto-boot */
-#undef	CONFIG_BOOTARGS			/* the boot command will set bootargs */
-
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"netdev=eth0\0"							\
 	"rootpath=/opt/eldk/ppc_82xx\0"					\
@@ -527,6 +454,4 @@
 	"unlock=yes\0"							\
    ""
 
-#define CONFIG_BOOTCOMMAND "run net_nfs"
-
 #endif /* __CONFIG_H */
diff --git a/include/configs/mgcoge.h b/include/configs/mgcoge.h
index 31428ea..233bee0 100644
--- a/include/configs/mgcoge.h
+++ b/include/configs/mgcoge.h
@@ -35,8 +35,8 @@
 
 #define CONFIG_CPM2		1	/* Has a CPM2 */
 
-/* Do boardspecific init */
-#define CONFIG_BOARD_EARLY_INIT_R       1
+/* include common defines/options for all Keymile boards */
+#include "keymile-common.h"
 
 /*
  * Select serial console configuration
@@ -74,23 +74,6 @@
 #define CONFIG_8260_CLKIN	66000000	/* in Hz */
 #endif
 
-#define CONFIG_BAUDRATE		115200
-
-#define CONFIG_BOOTCOUNT_LIMIT
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DTT
-#define CONFIG_CMD_ECHO
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_IMMAP
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-
 /*
  * Default environment settings
  */
@@ -124,36 +107,6 @@
 		"run ramargs addip; "						\
 		"bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0"		\
 	""
-#define CONFIG_BOOTCOMMAND	"run net_nfs"
-#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds */
-
-#undef	CONFIG_WATCHDOG			/* disable platform specific watchdog */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
-#define CONFIG_SYS_LONGHELP			/* undef to save memory	    */
-#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt   */
-#define CONFIG_HUSH_INIT_VAR	1
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size  */
-#else
-#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size  */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size  */
-#define CONFIG_SYS_MAXARGS		16		/* max number of command args */
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size  */
-
-#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on */
-#define CONFIG_SYS_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
-
-#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
-
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 #define CONFIG_SYS_SDRAM_BASE		0x00000000
 #define CONFIG_SYS_FLASH_BASE		0xFE000000
@@ -400,14 +353,4 @@
 #define OF_TBCLK		(bd->bi_busfreq / 4)
 #define OF_STDOUT_PATH		"/soc/cpm/serial@11a90"
 
-/*
- * How to get access to the slot ID.  Put this here to make it easy
- * to modify in a centralized location.  This is used in the HDLC
- * driver to set the MAC.
-*/
-#define CONFIG_SYS_SLOT_ID_BASE		CONFIG_SYS_PIGGY_BASE
-#define CONFIG_SYS_SLOT_ID_OFF		(0x07)	/* register offset */
-#define CONFIG_SYS_SLOT_ID_MASK		(0x3f)	/* mask for slot ID bits */
-
-
 #endif /* __CONFIG_H */
diff --git a/include/configs/mgsuvd.h b/include/configs/mgsuvd.h
index b862130..f53b6d3 100644
--- a/include/configs/mgsuvd.h
+++ b/include/configs/mgsuvd.h
@@ -36,8 +36,8 @@
 #define CONFIG_MPC866		1	/* This is a MPC866 CPU		*/
 #define CONFIG_MGSUVD		1	/* ...on a mgsuvd board	*/
 
-/* Do boardspecific init */
-#define CONFIG_BOARD_EARLY_INIT_R       1
+/* include common defines/options for all Keymile boards */
+#include "keymile-common.h"
 
 #define CONFIG_8xx_GCLK_FREQ		66000000
 
@@ -45,22 +45,13 @@
 #define CONFIG_SYS_SMC_DPMEM_OFFSET	0x1fc0
 #define CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		*/
 
-#define CONFIG_BAUDRATE		115200	/* console baudrate = 115kbps	*/
-
-#define CONFIG_BOOTCOUNT_LIMIT
 #define CONFIG_SYS_CPM_BOOTCOUNT_ADDR	0x1eb0	/* In case of SMC relocation, the
 					 * default value is not working */
 
-#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
-
-#define CONFIG_BOARD_TYPES	1	/* support board types		*/
-
 #define CONFIG_PREBOOT	"echo;" \
 	"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
 	"echo"
 
-#undef	CONFIG_BOOTARGS
-
 #define CONFIG_EXTRA_ENV_SETTINGS						\
 	"netdev=eth0\0"								\
 	"addcons=setenv bootargs ${bootargs} console=ttyCPM0,${baudrate}\0"	\
@@ -88,71 +79,12 @@
 		"cp.b 200000 f0000000 ${filesize};"				\
 		"protect on f0000000 +${filesize}\0"				\
 	""
-#define CONFIG_BOOTCOMMAND	"run flash_self"
-
-#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
-
-#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
 
 #undef CONFIG_RTC_MPC8xx		/* MPC866 does not support RTC	*/
 
 #define	CONFIG_TIMESTAMP		/* but print image timestmps	*/
 
 /*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DTT
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_PING
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
-#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt	*/
-
-#define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
-#define CONFIG_SYS_HUSH_PARSER		1	/* Use the HUSH parser		*/
-#ifdef	CONFIG_SYS_HUSH_PARSER
-#define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "
-#define CONFIG_HUSH_INIT_VAR	1
-#endif
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size	*/
-#else
-#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size	*/
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS		16	/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-
-#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
-
-#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
-
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
-/*
  * Low Level Configuration Settings
  * (address mappings, register initial values, etc.)
  * You should know what you are doing if you make changes here.
@@ -211,15 +143,6 @@
 #define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET+CONFIG_ENV_SECT_SIZE)
 #define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 
-/*
- * How to get access to the slot ID.  Put this here to make it easy
- * to modify in a centralized location.  This is used in the HDLC
- * driver to set the MAC.
-*/
-#define CONFIG_SYS_SLOT_ID_BASE		CONFIG_SYS_PIGGY_BASE
-#define CONFIG_SYS_SLOT_ID_OFF		(0x07)	/* register offset */
-#define CONFIG_SYS_SLOT_ID_MASK		(0x3f)	/* mask for slot ID bits */
-
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */