summaryrefslogtreecommitdiff
path: root/include/configs
diff options
context:
space:
mode:
authorMichal Simek <monstr@monstr.eu>2007-10-14 16:12:29 +0200
committerMichal Simek <monstr@monstr.eu>2007-10-14 16:12:29 +0200
commitf8bf90461d9bad2e6fed31fcebaf235f60dd6763 (patch)
tree9682a76d5ee32fb024e5f3574992960f7260a1a2 /include/configs
parente58ade3a5c0df399f13dffb897ee9ddbc30d7302 (diff)
downloadu-boot-imx-f8bf90461d9bad2e6fed31fcebaf235f60dd6763.zip
u-boot-imx-f8bf90461d9bad2e6fed31fcebaf235f60dd6763.tar.gz
u-boot-imx-f8bf90461d9bad2e6fed31fcebaf235f60dd6763.tar.bz2
[FIX] XUPV2P change command handling
and remove code violation
Diffstat (limited to 'include/configs')
-rw-r--r--include/configs/xupv2p.h36
1 files changed, 17 insertions, 19 deletions
diff --git a/include/configs/xupv2p.h b/include/configs/xupv2p.h
index b1c0ee6..c9320c2 100644
--- a/include/configs/xupv2p.h
+++ b/include/configs/xupv2p.h
@@ -31,7 +31,7 @@
#define CONFIG_XUPV2P 1
/* uart */
-#define CONFIG_XILINX_UARTLITE
+#define CONFIG_XILINX_UARTLITE
#define CONFIG_SERIAL_BASE XILINX_UART_BASEADDR
#define CONFIG_BAUDRATE XILINX_UART_BAUDRATE
#define CFG_BAUDRATE_TABLE { CONFIG_BAUDRATE }
@@ -49,11 +49,13 @@
* U-BOOT auto-relocate to TEXT_BASE. After RESET command Microblaze
* jump to CFG_RESET_ADDRESS where is the original U-BOOT code.
*/
-#define CFG_RESET_ADDRESS 0x36000000
+/* #define CFG_RESET_ADDRESS 0x36000000 */
/* gpio */
+#ifdef XILINX_GPIO_BASEADDR
#define CFG_GPIO_0 1
#define CFG_GPIO_0_ADDR XILINX_GPIO_BASEADDR
+#endif
/* interrupt controller */
#define CFG_INTC_0 1
@@ -66,6 +68,7 @@
#define CFG_TIMER_0_IRQ XILINX_TIMER_IRQ
#define FREQUENCE XILINX_CLOCK_FREQ
#define CFG_TIMER_0_PRELOAD ( FREQUENCE/1000 )
+#define CONFIG_XILINX_CLOCK_FREQ XILINX_CLOCK_FREQ
/*
* memory layout - Example
@@ -120,7 +123,6 @@
#define CFG_ENV_SIZE 0x1000
#define CFG_ENV_ADDR (CFG_MONITOR_BASE - CFG_ENV_SIZE)
-
/*
* BOOTP options
*/
@@ -129,29 +131,23 @@
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
-
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_BDI
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_IMI
-#define CONFIG_CMD_ECHO
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_RUN
-#define CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_FLASH
+#undef CONFIG_CMD_IMLS
+
#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_LOADS
-#define CONFIG_CMD_LOADB
-#define CONFIG_CMD_MISC
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_IRQ
#define CONFIG_CMD_PING
+#ifdef XILINX_SYSACE_BASEADDR
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#endif
/* Miscellaneous configurable options */
#define CFG_PROMPT "U-Boot-mONStR> "
@@ -163,7 +159,7 @@
#define CONFIG_BOOTDELAY 30
#define CONFIG_BOOTARGS "root=romfs"
-#define CONFIG_HOSTNAME "ml401"
+#define CONFIG_HOSTNAME "xupv2p"
#define CONFIG_BOOTCOMMAND "base 0;tftp 11000000 image.img;bootm"
#define CONFIG_IPADDR 192.168.0.3
#define CONFIG_SERVERIP 192.168.0.5
@@ -179,11 +175,13 @@
"echo"
/* system ace */
+#ifdef XILINX_SYSACE_BASEADDR
#define CONFIG_SYSTEMACE
/* #define DEBUG_SYSTEMACE */
#define SYSTEMACE_CONFIG_FPGA
#define CFG_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR
#define CFG_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH
#define CONFIG_DOS_PARTITION
+#endif
#endif /* __CONFIG_H */