ENGR00143442 uboot: support android spi boot and mfg on mx50 rd3 board

Add mx50_rd3_android default config file
Add basic support for UBI partition mount and UBIFS file read for recovery
Add gpmi nand enable in MFG kernel commandline by uboot configure,
which enable MFG tool to flash system images on NAND.

The total NAND boot and NAND recovery has been disabled.
They will be enabled later.

Signed-off-by: Xinyu Chen <xinyu.chen@freescale.com>

2 files changed, 345 insertions, 1 deletions

diff --git a/include/configs/mx50_rd3_android.h b/include/configs/mx50_rd3_android.h
new file mode 100644
index 0000000..3d39584
--- /dev/null
+++ b/include/configs/mx50_rd3_android.h
@@ -0,0 +1,344 @@
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc.
+ *
+ * Configuration settings for the MX50-RD3 Freescale board.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/arch/mx50.h>
+
+ /* High Level Configuration Options */
+#define CONFIG_MXC
+#define CONFIG_MX50
+#define CONFIG_MX50_RD3
+#define CONFIG_LPDDR2
+#define CONFIG_FLASH_HEADER
+#define CONFIG_FLASH_HEADER_OFFSET 0x400
+
+#define CONFIG_SKIP_RELOCATE_UBOOT
+
+/*
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_ARCH_MMU
+*/
+
+#define CONFIG_MX50_HCLK_FREQ	24000000
+#define CONFIG_SYS_PLL2_FREQ    400
+#define CONFIG_SYS_AHB_PODF     2
+#define CONFIG_SYS_AXIA_PODF    0
+#define CONFIG_SYS_AXIB_PODF    1
+
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+#define CONFIG_SYS_64BIT_VSPRINTF
+
+#define BOARD_LATE_INIT
+/*
+ * Disabled for now due to build problems under Debian and a significant
+ * increase in the final file size: 144260 vs. 109536 Bytes.
+ */
+
+#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
+#define CONFIG_REVISION_TAG		1
+#define CONFIG_SETUP_MEMORY_TAGS	1
+#define CONFIG_INITRD_TAG		1
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN		(4 * 1024 * 1024)
+/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_SIZE	128
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_MXC_UART
+#define CONFIG_UART_BASE_ADDR	UART1_BASE_ADDR
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_CONS_INDEX		1
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_SYS_BAUDRATE_TABLE	{9600, 19200, 38400, 57600, 115200}
+
+/***********************************************************
+ * Command definition
+ ***********************************************************/
+
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_NET_RETRY_COUNT  100
+#define CONFIG_NET_MULTI 1
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_DNS
+
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_ENV
+
+/*#define CONFIG_CMD */
+#define CONFIG_REF_CLK_FREQ CONFIG_MX50_HCLK_FREQ
+
+#undef CONFIG_CMD_IMLS
+
+#define CONFIG_BOOTDELAY	3
+
+#define CONFIG_PRIME	"FEC0"
+
+#define CONFIG_LOADADDR		0x70800000	/* loadaddr env var */
+#define CONFIG_RD_LOADADDR	(CONFIG_LOADADDR + 0x500000)
+
+#define	CONFIG_EXTRA_ENV_SETTINGS					\
+		"netdev=eth0\0"						\
+		"ethprime=FEC0\0"					\
+		"uboot=u-boot.bin\0"			\
+		"kernel=uImage\0"				\
+		"rd_loadaddr=0x70D00000\0"                              \
+		"nfsroot=/opt/eldk/arm\0"				\
+		"bootargs_base=setenv bootargs console=ttymxc0,115200\0"\
+		"bootargs_nfs=setenv bootargs ${bootargs} root=/dev/nfs "\
+			"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0"\
+		"bootcmd_net=run bootargs_base bootargs_nfs; "		\
+			"tftpboot ${loadaddr} ${kernel}; bootm\0"	\
+		"bootcmd=run bootcmd_nand \0"				\
+		"bootcmd_nand=run bootargs_base bootargs_android;"	\
+		     "sf probe 1;"	\
+		     "sf read ${loadaddr} 0x40000 0x380000;"	\
+		     "sf read ${rd_loadaddr} 0x3C0000 0x40000;"	\
+		     "bootm ${loadaddr} ${rd_loadaddr}\0"		\
+		"bootargs_android=setenv bootargs ${bootargs}  "	\
+		     "androidboot.console=ttymxc0 init=/init "		\
+		     "keypad gpmi:nand ubi.mtd=4\0"			\
+		"bootcmd_android_recovery=run bootargs_base"		\
+		     " bootargs_android_recovery;"			\
+		     "nand read ${loadaddr} 0x1400000 0x400000; bootm\0"	\
+		"bootargs_android_recovery=setenv bootargs ${bootargs}" \
+		     " init=/init keypad gpmi:nand ubi.mtd=3 ubi.mtd=4" \
+		     " root=ubi0:recovery rootfstype=ubifs\0" \
+
+
+#define CONFIG_ARP_TIMEOUT	200UL
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
+#define CONFIG_SYS_PROMPT		"MX50_RD3 U-Boot > "
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS	16	/* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
+
+#define CONFIG_SYS_MEMTEST_START	0	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x10000
+
+#undef	CONFIG_SYS_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+
+#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
+
+#define CONFIG_SYS_HZ				1000
+
+#define CONFIG_CMDLINE_EDITING	1
+
+#define CONFIG_FEC0_IOBASE	FEC_BASE_ADDR
+#define CONFIG_FEC0_PINMUX	-1
+#define CONFIG_FEC0_PHY_ADDR	-1
+#define CONFIG_FEC0_MIIBASE	-1
+
+#define CONFIG_GET_FEC_MAC_ADDR_FROM_IIM
+
+#define CONFIG_MXC_FEC
+#define CONFIG_MII
+#define CONFIG_MII_GASKET
+#define CONFIG_DISCOVER_PHY
+
+/*
+ * DDR ZQ calibration
+ */
+#define CONFIG_ZQ_CALIB
+
+/*
+ * I2C Configs
+ */
+#define CONFIG_CMD_I2C          1
+
+#ifdef CONFIG_CMD_I2C
+	#define CONFIG_HARD_I2C         1
+	#define CONFIG_I2C_MXC          1
+	#define CONFIG_SYS_I2C_PORT             I2C2_BASE_ADDR
+	#define CONFIG_SYS_I2C_SPEED            100000
+	#define CONFIG_SYS_I2C_SLAVE            0xfe
+#endif
+
+
+/*
+ * SPI Configs
+ */
+#define CONFIG_FSL_SF		1
+#define CONFIG_CMD_SPI
+#define CONFIG_CMD_SF
+#define CONFIG_SPI_FLASH_IMX_M25PXX 1
+#define CONFIG_SPI_FLASH_CS	1
+#define CONFIG_IMX_CSPI
+#define IMX_CSPI_VER_0_7        1
+#define MAX_SPI_BYTES		(8 * 4)
+#define CONFIG_IMX_SPI_PMIC
+#define CONFIG_IMX_SPI_PMIC_CS 0
+
+/*
+ * MMC Configs
+ */
+#ifdef CONFIG_CMD_MMC
+	#define CONFIG_MMC				1
+	#define CONFIG_GENERIC_MMC
+	#define CONFIG_IMX_MMC
+	#define CONFIG_SYS_FSL_ESDHC_NUM        3
+	#define CONFIG_SYS_FSL_ESDHC_ADDR       0
+	#define CONFIG_SYS_MMC_ENV_DEV  0
+	#define CONFIG_DOS_PARTITION	1
+	#define CONFIG_CMD_FAT		1
+	#define CONFIG_CMD_EXT2		1
+
+	/* detect whether ESDHC1, ESDHC2, or ESDHC3 is boot device */
+	#define CONFIG_DYNAMIC_MMC_DEVNO
+
+	#define CONFIG_BOOT_PARTITION_ACCESS
+	#define CONFIG_EMMC_DDR_PORT_DETECT
+	#define CONFIG_EMMC_DDR_MODE
+
+	/* Indicate to esdhc driver which ports support 8-bit data */
+	#define CONFIG_MMC_8BIT_PORTS		0x2   /* ports 1 and 2 */
+#endif
+
+/*
+ * GPMI Nand Configs
+ */
+#undef CONFIG_CMD_NAND
+
+#ifdef CONFIG_CMD_NAND
+	#define CONFIG_NAND_GPMI
+	#define CONFIG_GPMI_NFC_SWAP_BLOCK_MARK
+	#define CONFIG_GPMI_NFC_V2
+
+	#define CONFIG_GPMI_REG_BASE	GPMI_BASE_ADDR
+	#define CONFIG_BCH_REG_BASE	BCH_BASE_ADDR
+
+	#define NAND_MAX_CHIPS		8
+	#define CONFIG_SYS_NAND_BASE		0x40000000
+	#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#endif
+
+/*
+ * APBH DMA Configs
+ */
+#define CONFIG_APBH_DMA
+
+#ifdef CONFIG_APBH_DMA
+	#define CONFIG_APBH_DMA_V2
+	#define CONFIG_MXS_DMA_REG_BASE	ABPHDMA_BASE_ADDR
+#endif
+
+/*-----------------------------------------------------------------------
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE	(128 * 1024)	/* regular stack */
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS	1
+#define PHYS_SDRAM_1		CSD0_BASE_ADDR
+#define PHYS_SDRAM_1_SIZE	(512 * 1024 * 1024)
+#define iomem_valid_addr(addr, size) \
+	(addr >= PHYS_SDRAM_1 && addr <= (PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE))
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+#define CONFIG_SYS_NO_FLASH
+
+/* Monitor at beginning of flash */
+#define CONFIG_FSL_ENV_IN_SF
+
+#define CONFIG_ENV_SECT_SIZE    (64 * 1024)
+#define CONFIG_ENV_SIZE         CONFIG_ENV_SECT_SIZE
+
+#if defined(CONFIG_FSL_ENV_IN_NAND)
+	#define CONFIG_ENV_IS_IN_NAND 1
+	#define CONFIG_ENV_OFFSET	0x1A00000
+#elif defined(CONFIG_FSL_ENV_IN_MMC)
+	#define CONFIG_ENV_IS_IN_MMC	1
+	#define CONFIG_ENV_OFFSET	(768 * 1024)
+#elif defined(CONFIG_FSL_ENV_IN_SF)
+	#define CONFIG_ENV_IS_IN_SPI_FLASH	1
+	#define CONFIG_ENV_SPI_CS		1
+	#define CONFIG_ENV_OFFSET       (192 * 1024)
+#else
+	#define CONFIG_ENV_IS_NOWHERE	1
+#endif
+
+/*
+ * Android support Configs
+ */
+/*
+#define CONFIG_ANDROID_RECOVERY
+#define CONFIG_ANDROID_RECOVERY_BOOTARGS_MMC \
+       "setenv bootargs ${bootargs} init=/init root=/dev/mmcblk0p4"    \
+       " rootfs=ext4 keypad"
+#define CONFIG_ANDROID_RECOVERY_BOOTCMD_MMC  \
+	"run bootargs_base bootargs_android_recovery;"  \
+	"mmc read 0 ${loadaddr} 0x800 0x2000;bootm"
+#define CONFIG_ANDROID_RECOVERY_BOOTARGS_NAND \
+	"setenv bootargs ${bootargs} init=/init keypad gpmi:nand ubi.mtd=3 ubi.mtd=4" \
+	" root=ubi0:recovery rootfstype=ubifs keypad"
+#define CONFIG_ANDROID_RECOVERY_BOOTCMD_NAND  \
+	"run bootargs_base bootargs_android_recovery;"  \
+	"nand read ${loadaddr} 0x1400000 0x400000; bootm"
+#define CONFIG_ANDROID_RECOVERY_CMD_FILE "/recovery/command"
+
+#define CONFIG_CMD_UBI
+#define CONFIG_CMD_UBIFS
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+#define MTDIDS_DEFAULT "nand0=nand0"
+#define MTDPARTS_DEFAULT "mtdparts=nand0:20M@0x0(BOOT),6M@0x1400000(KERNEL),1M@0x1A00000(MISC),20M@0x1B00000(RECOVERY),350M@0x2F00000(ROOT)"
+#define MTD_ACTIVE_PART "nand0,4"
+#define CONFIG_RBTREE
+#define CONFIG_LZO
+*/
+
+#define CONFIG_ANDROID_SYSTEM_PARTITION_MMC 2
+#define CONFIG_ANDROID_RECOVERY_PARTITION_MMC 4
+#define CONFIG_ANDROID_CACHE_PARTITION_MMC 6
+#define CONFIG_ANDROID_UBIFS_PARTITION_NM  "ROOT"
+#define CONFIG_ANDROID_CACHE_PARTITION_NAND "cache"
+
+#endif				/* __CONFIG_H */
diff --git a/include/configs/mx50_rd3_mfg.h b/include/configs/mx50_rd3_mfg.h
index 4c13fc9..9feda4a 100644
--- a/include/configs/mx50_rd3_mfg.h
+++ b/include/configs/mx50_rd3_mfg.h
@@ -108,7 +108,7 @@
 #define CONFIG_RD_LOADADDR	(CONFIG_LOADADDR + 0x300000)
 
 #define CONFIG_BOOTARGS         "console=ttymxc0,115200 "\
-				"rdinit=/linuxrc"
+				"rdinit=/linuxrc gpmi:nand"
 #define CONFIG_BOOTCOMMAND      "bootm 0x70800000 0x70B00000"
 #define CONFIG_ENV_IS_EMBEDDED
 #define	CONFIG_EXTRA_ENV_SETTINGS					\