ENGR00140824 Android: Enable fastboot support for mx50 rdp

Enable fastboot support for mx50 rdp.

Signed-off-by: Sammy He <r62914@freescale.com>

1 files changed, 322 insertions, 0 deletions

diff --git a/include/configs/mx50_rdp_android.h b/include/configs/mx50_rdp_android.h
new file mode 100644
index 0000000..d1bf934
--- /dev/null
+++ b/include/configs/mx50_rdp_android.h
@@ -0,0 +1,322 @@
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc.
+ *
+ * Configuration settings for the MX50-RDP Freescale board.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/arch/mx50.h>
+
+ /* High Level Configuration Options */
+#define CONFIG_MXC
+#define CONFIG_MX50
+#define CONFIG_MX50_RDP
+#define CONFIG_LPDDR2
+#define CONFIG_FLASH_HEADER
+#define CONFIG_FLASH_HEADER_OFFSET 0x400
+
+#define CONFIG_SKIP_RELOCATE_UBOOT
+
+/*
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_ARCH_MMU
+*/
+
+#define CONFIG_MX50_HCLK_FREQ	24000000
+#define CONFIG_SYS_PLL2_FREQ    400
+#define CONFIG_SYS_AHB_PODF     2
+#define CONFIG_SYS_AXIA_PODF    0
+#define CONFIG_SYS_AXIB_PODF    1
+
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+#define CONFIG_SYS_64BIT_VSPRINTF
+
+#define BOARD_LATE_INIT
+/*
+ * Disabled for now due to build problems under Debian and a significant
+ * increase in the final file size: 144260 vs. 109536 Bytes.
+ */
+
+#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
+#define CONFIG_REVISION_TAG		1
+#define CONFIG_SETUP_MEMORY_TAGS	1
+#define CONFIG_INITRD_TAG		1
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2 * 1024 * 1024)
+/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_SIZE	128
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_MXC_UART
+#define CONFIG_UART_BASE_ADDR	UART1_BASE_ADDR
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_CONS_INDEX		1
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_SYS_BAUDRATE_TABLE	{9600, 19200, 38400, 57600, 115200}
+
+/***********************************************************
+ * Command definition
+ ***********************************************************/
+
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_NET_RETRY_COUNT  100
+#define CONFIG_NET_MULTI 1
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_DNS
+
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_ENV
+
+/*#define CONFIG_CMD */
+#define CONFIG_REF_CLK_FREQ CONFIG_MX50_HCLK_FREQ
+
+#undef CONFIG_CMD_IMLS
+
+#define CONFIG_BOOTDELAY	3
+
+#define CONFIG_PRIME	"FEC0"
+
+#define CONFIG_LOADADDR		0x70800000	/* loadaddr env var */
+#define CONFIG_RD_LOADADDR	(CONFIG_LOADADDR + 0x300000)
+
+#define	CONFIG_EXTRA_ENV_SETTINGS					\
+		"netdev=eth0\0"						\
+		"ethprime=FEC0\0"					\
+		"uboot=u-boot.bin\0"			\
+		"kernel=uImage\0"				\
+		"nfsroot=/opt/eldk/arm\0"				\
+		"bootargs_base=setenv bootargs console=ttymxc0,115200\0"\
+		"bootargs_nfs=setenv bootargs ${bootargs} root=/dev/nfs "\
+			"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0"\
+		"bootcmd_net=run bootargs_base bootargs_nfs; "		\
+			"tftpboot ${loadaddr} ${kernel}; bootm\0"	\
+		"bootargs_mmc=setenv bootargs ${bootargs} ip=dhcp "     \
+			"root=/dev/mmcblk0p2 rootwait\0"                \
+		"bootcmd_mmc=run bootargs_base bootargs_mmc; bootm\0"   \
+		"bootcmd=run bootcmd_net\0"                             \
+
+
+#define CONFIG_ARP_TIMEOUT	200UL
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
+#define CONFIG_SYS_PROMPT		"MX50_RDP U-Boot > "
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS	16	/* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
+
+#define CONFIG_SYS_MEMTEST_START	0	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x10000
+
+#undef	CONFIG_SYS_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+
+#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
+
+#define CONFIG_SYS_HZ				1000
+
+#define CONFIG_CMDLINE_EDITING	1
+
+#define CONFIG_FEC0_IOBASE	FEC_BASE_ADDR
+#define CONFIG_FEC0_PINMUX	-1
+#define CONFIG_FEC0_PHY_ADDR	-1
+#define CONFIG_FEC0_MIIBASE	-1
+
+#define CONFIG_GET_FEC_MAC_ADDR_FROM_IIM
+
+#define CONFIG_MXC_FEC
+#define CONFIG_MII
+#define CONFIG_MII_GASKET
+#define CONFIG_DISCOVER_PHY
+
+/*
+ * DDR ZQ calibration
+ */
+#define CONFIG_ZQ_CALIB
+
+/*
+ * I2C Configs
+ */
+#define CONFIG_CMD_I2C          1
+
+#ifdef CONFIG_CMD_I2C
+	#define CONFIG_HARD_I2C         1
+	#define CONFIG_I2C_MXC          1
+	#define CONFIG_SYS_I2C_PORT             I2C2_BASE_ADDR
+	#define CONFIG_SYS_I2C_SPEED            100000
+	#define CONFIG_SYS_I2C_SLAVE            0xfe
+#endif
+
+
+/*
+ * SPI Configs
+ */
+#define CONFIG_FSL_SF		1
+#define CONFIG_CMD_SPI
+#define CONFIG_CMD_SF
+#define CONFIG_SPI_FLASH_IMX_ATMEL	1
+#define CONFIG_SPI_FLASH_CS	1
+#define CONFIG_IMX_CSPI
+#define IMX_CSPI_VER_0_7        1
+#define MAX_SPI_BYTES		(8 * 4)
+#define CONFIG_IMX_SPI_PMIC
+#define CONFIG_IMX_SPI_PMIC_CS 0
+
+/*
+ * MMC Configs
+ */
+#ifdef CONFIG_CMD_MMC
+	#define CONFIG_MMC				1
+	#define CONFIG_GENERIC_MMC
+	#define CONFIG_IMX_MMC
+	#define CONFIG_SYS_FSL_ESDHC_NUM        3
+	#define CONFIG_SYS_FSL_ESDHC_ADDR       0
+	#define CONFIG_SYS_MMC_ENV_DEV  0
+	#define CONFIG_DOS_PARTITION	1
+	#define CONFIG_CMD_FAT		1
+	#define CONFIG_CMD_EXT2		1
+
+	/* detect whether ESDHC1, ESDHC2, or ESDHC3 is boot device */
+	#define CONFIG_DYNAMIC_MMC_DEVNO
+
+	#define CONFIG_BOOT_PARTITION_ACCESS
+	#define CONFIG_EMMC_DDR_MODE
+
+	/* Indicate to esdhc driver which ports support 8-bit data */
+	#define CONFIG_MMC_8BIT_PORTS		0x6   /* ports 1 and 2 */
+#endif
+
+/*
+ * GPMI Nand Configs
+ */
+#define CONFIG_CMD_NAND
+
+#ifdef CONFIG_CMD_NAND
+	#define CONFIG_NAND_GPMI
+	#define CONFIG_GPMI_NFC_SWAP_BLOCK_MARK
+	#define CONFIG_GPMI_NFC_V2
+
+	#define CONFIG_GPMI_REG_BASE	GPMI_BASE_ADDR
+	#define CONFIG_BCH_REG_BASE	BCH_BASE_ADDR
+
+	#define NAND_MAX_CHIPS		8
+	#define CONFIG_SYS_NAND_BASE		0x40000000
+	#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#endif
+
+/*
+ * APBH DMA Configs
+ */
+#define CONFIG_APBH_DMA
+
+#ifdef CONFIG_APBH_DMA
+	#define CONFIG_APBH_DMA_V2
+	#define CONFIG_MXS_DMA_REG_BASE	ABPHDMA_BASE_ADDR
+#endif
+
+/*-----------------------------------------------------------------------
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE	(128 * 1024)	/* regular stack */
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS	1
+#define PHYS_SDRAM_1		CSD0_BASE_ADDR
+#define PHYS_SDRAM_1_SIZE	(512 * 1024 * 1024)
+#define iomem_valid_addr(addr, size) \
+	(addr >= PHYS_SDRAM_1 && addr <= (PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE))
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+#define CONFIG_SYS_NO_FLASH
+
+/* Monitor at beginning of flash */
+#define CONFIG_FSL_ENV_IN_MMC
+
+#define CONFIG_ENV_SECT_SIZE    (128 * 1024)
+#define CONFIG_ENV_SIZE         CONFIG_ENV_SECT_SIZE
+
+#if defined(CONFIG_FSL_ENV_IN_NAND)
+	#define CONFIG_ENV_IS_IN_NAND 1
+	#define CONFIG_ENV_OFFSET	0x100000
+#elif defined(CONFIG_FSL_ENV_IN_MMC)
+	#define CONFIG_ENV_IS_IN_MMC	1
+	#define CONFIG_ENV_OFFSET	(768 * 1024)
+#elif defined(CONFIG_FSL_ENV_IN_SF)
+	#define CONFIG_ENV_IS_IN_SPI_FLASH	1
+	#define CONFIG_ENV_SPI_CS		1
+	#define CONFIG_ENV_OFFSET       (768 * 1024)
+#else
+	#define CONFIG_ENV_IS_NOWHERE	1
+#endif
+
+/*
+ * Android support Configs
+ */
+
+/* Android fastboot configs */
+#define CONFIG_USB_DEVICE
+#define CONFIG_IMX_UDC                 1
+#define CONFIG_FASTBOOT                1
+#define CONFIG_FASTBOOT_STORAGE_EMMC_SATA
+#define CONFIG_FASTBOOT_VENDOR_ID      0xbb4
+#define CONFIG_FASTBOOT_PRODUCT_ID     0xc01
+#define CONFIG_FASTBOOT_BCD_DEVICE     0x311
+#define CONFIG_FASTBOOT_MANUFACTURER_STR  "Freescale"
+#define CONFIG_FASTBOOT_PRODUCT_NAME_STR "i.mx50 rdp"
+#define CONFIG_FASTBOOT_CONFIGURATION_STR  "Android fastboot"
+#define CONFIG_FASTBOOT_INTERFACE_STR    "Android fastboot"
+#define CONFIG_FASTBOOT_SERIAL_NUM      "12345"
+#define CONFIG_FASTBOOT_SATA_NO          0
+#define CONFIG_FASTBOOT_TRANSFER_BUF    0x80000000
+#define CONFIG_FASTBOOT_TRANSFER_BUF_SIZE 0x8000000 /* 128M byte */
+
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+
+#define CONFIG_ANDROID_SYSTEM_PARTITION_MMC 2
+#define CONFIG_ANDROID_RECOVERY_PARTITION_MMC 4
+#define CONFIG_ANDROID_CACHE_PARTITION_MMC 6
+
+#endif				/* __CONFIG_H */