ENGR00131779: Use serial_mxc as uart driver for all platforms

Use serial_mxc as uart driver for all platforms.

Signed-off-by: Terry Lv <r65388@freescale.com>

16 files changed, 240 insertions, 30 deletions

diff --git a/include/configs/mx31_3stack.h b/include/configs/mx31_3stack.h
index d7629b2..6a09e0a 100644
--- a/include/configs/mx31_3stack.h
+++ b/include/configs/mx31_3stack.h
@@ -1,5 +1,5 @@
 /*
- * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
  *
  * Configuration settings for the MX31 3Stack Freescale board.
  *
@@ -22,7 +22,7 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#include <asm/arch/mx31-regs.h>
+#include <asm/arch/mx31.h>
 
  /* High Level Configuration Options */
 #define CONFIG_ARM1136		1	/* This is an arm1136 CPU core */
@@ -51,7 +51,7 @@
  * Hardware drivers
  */
 #define CONFIG_MXC_UART	1
-#define CONFIG_SYS_MX31_UART1   1
+#define CONFIG_UART_BASE_ADDR	0x43f90000
 
 #define CONFIG_MXC_SPI		1
 
diff --git a/include/configs/mx35_3stack.h b/include/configs/mx35_3stack.h
index 89b9f39..43715be 100644
--- a/include/configs/mx35_3stack.h
+++ b/include/configs/mx35_3stack.h
@@ -68,7 +68,8 @@
 #define CONFIG_SYS_I2C_SPEED		100000
 #define CONFIG_SYS_I2C_SLAVE		0xfe
 
-#define CONFIG_MX35_UART	UART1_BASE_ADDR
+#define CONFIG_MXC_UART 1
+#define CONFIG_UART_BASE_ADDR   UART1_BASE_ADDR
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
diff --git a/include/configs/mx35_3stack_mfg.h b/include/configs/mx35_3stack_mfg.h
index ba962ef..87d1238 100644
--- a/include/configs/mx35_3stack_mfg.h
+++ b/include/configs/mx35_3stack_mfg.h
@@ -76,7 +76,8 @@
 #define CONFIG_SYS_I2C_SPEED		100000
 #define CONFIG_SYS_I2C_SLAVE		0xfe
 
-#define CONFIG_MX35_UART	UART1_BASE_ADDR
+#define CONFIG_MXC_UART 1
+#define CONFIG_UART_BASE_ADDR   UART1_BASE_ADDR
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
diff --git a/include/configs/mx35_3stack_mmc.h b/include/configs/mx35_3stack_mmc.h
index c0c53fd..6104c09 100644
--- a/include/configs/mx35_3stack_mmc.h
+++ b/include/configs/mx35_3stack_mmc.h
@@ -71,7 +71,8 @@
 #define CONFIG_SYS_I2C_SPEED		100000
 #define CONFIG_SYS_I2C_SLAVE		0xfe
 
-#define CONFIG_MX35_UART	UART1_BASE_ADDR
+#define CONFIG_MXC_UART 1
+#define CONFIG_UART_BASE_ADDR   UART1_BASE_ADDR
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
diff --git a/include/configs/mx51_3stack.h b/include/configs/mx51_3stack.h
index e628ede..e39565b 100644
--- a/include/configs/mx51_3stack.h
+++ b/include/configs/mx51_3stack.h
@@ -69,8 +69,8 @@
 /*
  * Hardware drivers
  */
-#define CONFIG_MX51_UART	1
-#define CONFIG_MX51_UART1	1
+#define CONFIG_MXC_UART 1
+#define CONFIG_UART_BASE_ADDR   UART1_BASE_ADDR
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
diff --git a/include/configs/mx51_3stack_android.h b/include/configs/mx51_3stack_android.h
index 7935c76..a18944a 100644
--- a/include/configs/mx51_3stack_android.h
+++ b/include/configs/mx51_3stack_android.h
@@ -69,8 +69,8 @@
 /*
  * Hardware drivers
  */
-#define CONFIG_MX51_UART	1
-#define CONFIG_MX51_UART1	1
+#define CONFIG_MXC_UART 1
+#define CONFIG_UART_BASE_ADDR   UART1_BASE_ADDR
 
 /*
  * SPI Configs
diff --git a/include/configs/mx51_bbg.h b/include/configs/mx51_bbg.h
index 99fd4ac..bdb3621 100644
--- a/include/configs/mx51_bbg.h
+++ b/include/configs/mx51_bbg.h
@@ -68,8 +68,8 @@
 /*
  * Hardware drivers
  */
-#define CONFIG_MX51_UART	1
-#define CONFIG_MX51_UART1	1
+#define CONFIG_MXC_UART 1
+#define CONFIG_UART_BASE_ADDR   UART1_BASE_ADDR
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
diff --git a/include/configs/mx51_bbg_android.h b/include/configs/mx51_bbg_android.h
index d4db1c9..a44e821 100644
--- a/include/configs/mx51_bbg_android.h
+++ b/include/configs/mx51_bbg_android.h
@@ -69,8 +69,8 @@
 /*
  * Hardware drivers
  */
-#define CONFIG_MX51_UART	1
-#define CONFIG_MX51_UART1	1
+#define CONFIG_MXC_UART 1
+#define CONFIG_UART_BASE_ADDR   UART1_BASE_ADDR
 
 
 #define CONFIG_CMD_PING
@@ -157,8 +157,8 @@
 		"bootcmd_net=run bootargs_base bootargs_nfs; "		\
 			"tftpboot ${loadaddr} ${kernel}; bootm\0"	\
 		"bootcmd_android=run bootargs_base bootargs_android; "	\
-			"mmcinit;cp.b 0x100000 ${loadaddr} 0x250000; "	\
-			"cp.b 0x400000 ${rd_loadaddr} 0x4B000; "	\
+			"mmc read 0 ${loadaddr} 0x800 0x1280; "	\
+			"mmc read 0 ${rd_loadaddr} 0x2000 0x258; "	\
 			"bootm ${loadaddr} ${rd_loadaddr}\0"		\
 		"prg_uboot=tftpboot ${loadaddr} ${uboot}; "		\
 			"protect off ${uboot_addr} 0xa003ffff; "	\
diff --git a/include/configs/mx51_bbg_iram.h b/include/configs/mx51_bbg_iram.h
new file mode 100644
index 0000000..b048d9b
--- /dev/null
+++ b/include/configs/mx51_bbg_iram.h
@@ -0,0 +1,207 @@
+/*
+ * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
+ *
+ * (C) Copyright 2009-2010 Freescale Semiconductor, Inc.
+ *
+ * Configuration settings for the MX51-3Stack Freescale board.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/arch/mx51.h>
+
+ /* High Level Configuration Options */
+#define CONFIG_ARMV7		1	/* This is armv7 Cortex-A8 CPU core */
+
+#define CONFIG_MXC		1
+#define CONFIG_MX51_BBG		1	/* in a mx51 */
+#define CONFIG_FLASH_HEADER	1
+#define CONFIG_FLASH_HEADER_OFFSET 0x400
+#define CONFIG_FLASH_HEADER_BARKER 0xB1
+
+#define CONFIG_SKIP_RELOCATE_UBOOT
+
+#define CONFIG_MX51_HCLK_FREQ	24000000	/* RedBoot says 26MHz */
+
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_ARCH_MMU
+
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+#define BOARD_LATE_INIT
+
+/*
+ * Disabled for now due to build problems under Debian and a significant
+ * increase in the final file size: 144260 vs. 109536 Bytes.
+ */
+
+#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
+#define CONFIG_REVISION_TAG		1
+#define CONFIG_SETUP_MEMORY_TAGS	1
+#define CONFIG_INITRD_TAG		1
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN		(5 * 1024)
+/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_SIZE	128
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_MXC_UART 1
+#define CONFIG_UART_BASE_ADDR   UART1_BASE_ADDR
+
+/*
+ * SPI Configs
+ * */
+
+/*
+ * MMC Configs
+ * */
+
+/*
+ * Eth Configs
+ */
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_CONS_INDEX		1
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_SYS_BAUDRATE_TABLE	{9600, 19200, 38400, 57600, 115200}
+
+/***********************************************************
+ * Command definition
+ ***********************************************************/
+
+#define CONFIG_CMD_BDI		/* bdinfo			*/
+#define CONFIG_CMD_BOOTD	/* bootd			*/
+#define CONFIG_CMD_CONSOLE	/* coninfo			*/
+#define CONFIG_CMD_FPGA		/* FPGA configuration Support	*/
+#define CONFIG_CMD_IMI		/* iminfo			*/
+#define CONFIG_CMD_MEMORY	/* md mm nm mw cp cmp crc base loop mtest */
+#define CONFIG_CMD_RUN		/* run command in env variable	*/
+#define CONFIG_CMD_SOURCE	/* "source" command support	*/
+#define CONFIG_CMD_XIMG		/* Load part of Multi Image	*/
+
+/*
+ * SPI Configs
+ * */
+
+/*
+ * MMC Configs
+ * */
+/*
+ * Eth Configs
+ */
+
+
+/* Enable below configure when supporting nand */
+#define CONFIG_CMD_ENV
+
+#undef CONFIG_CMD_IMLS
+
+#define CONFIG_BOOTDELAY	3
+
+#define CONFIG_PRIME	"FEC0"
+
+#define CONFIG_LOADADDR		0x90100000	/* loadaddr env var */
+
+#define CONFIG_BOOTARGS         "console=ttymxc0,115200 "\
+				"rdinit=/linuxrc"
+
+#define CONFIG_BOOTCOMMAND      "bootm ${loadaddr} 0x90800000"
+#define CONFIG_ENV_IS_EMBEDDED
+/*
+ * The MX51 3stack board seems to have a hardware "peculiarity" confirmed under
+ * U-Boot, RedBoot and Linux: the ethernet Rx signal is reaching the CS8900A
+ * controller inverted. The controller is capable of detecting and correcting
+ * this, but it needs 4 network packets for that. Which means, at startup, you
+ * will not receive answers to the first 4 packest, unless there have been some
+ * broadcasts on the network, or your board is on a hub. Reducing the ARP
+ * timeout from default 5 seconds to 200ms we speed up the initial TFTP
+ * transfer, should the user wish one, significantly.
+ */
+#define CONFIG_ARP_TIMEOUT	200UL
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
+#define CONFIG_SYS_PROMPT		"BBG U-Boot > "
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS	16	/* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
+
+#define CONFIG_SYS_MEMTEST_START	0	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x10000
+
+#undef	CONFIG_SYS_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+
+#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
+
+#define CONFIG_SYS_HZ				1000
+
+#define CONFIG_CMDLINE_EDITING	1
+
+/*-----------------------------------------------------------------------
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE	(30 * 1024)	/* regular stack */
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS	1
+#define PHYS_SDRAM_1		CSD0_BASE_ADDR
+/* TO1 boards */
+/* #define PHYS_SDRAM_1_SIZE	(128 * 1024 * 1024) */
+#define PHYS_SDRAM_1_SIZE	(512 * 1024 * 1024)
+#define iomem_valid_addr(addr, size) \
+	(addr >= PHYS_SDRAM_1 && addr <= (PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE))
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+#define CONFIG_SYS_NO_FLASH
+
+/* Monitor at beginning of flash */
+/* #define CONFIG_FSL_ENV_IN_SF
+*/
+/* #define CONFIG_FSL_ENV_IN_MMC */
+
+#define CONFIG_ENV_SECT_SIZE    (128 * 1024)
+#define CONFIG_ENV_SIZE         CONFIG_ENV_SECT_SIZE
+#define CONFIG_ENV_IS_NOWHERE
+
+/*
+ * JFFS2 partitions
+ */
+/*
+#undef CONFIG_JFFS2_CMDLINE
+#define CONFIG_JFFS2_DEV	"nand0"
+*/
+#endif				/* __CONFIG_H */
diff --git a/include/configs/mx51_bbg_mfg.h b/include/configs/mx51_bbg_mfg.h
index becad73..baca67b 100644
--- a/include/configs/mx51_bbg_mfg.h
+++ b/include/configs/mx51_bbg_mfg.h
@@ -68,8 +68,8 @@
 /*
  * Hardware drivers
  */
-#define CONFIG_MX51_UART	1
-#define CONFIG_MX51_UART1	1
+#define CONFIG_MXC_UART 1
+#define CONFIG_UART_BASE_ADDR   UART1_BASE_ADDR
 
 /*
  * SPI Configs
diff --git a/include/configs/mx53_arm2.h b/include/configs/mx53_arm2.h
index f94191d..9a976b8 100644
--- a/include/configs/mx53_arm2.h
+++ b/include/configs/mx53_arm2.h
@@ -69,8 +69,8 @@
 /*
  * Hardware drivers
  */
-#define CONFIG_MX53_UART	1
-#define CONFIG_MX53_UART1	1
+#define CONFIG_MXC_UART 1
+#define CONFIG_UART_BASE_ADDR   UART1_BASE_ADDR
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
diff --git a/include/configs/mx53_arm2_android.h b/include/configs/mx53_arm2_android.h
index 3e02620..4eed270 100644
--- a/include/configs/mx53_arm2_android.h
+++ b/include/configs/mx53_arm2_android.h
@@ -69,8 +69,8 @@
 /*
  * Hardware drivers
  */
-#define CONFIG_MX53_UART	1
-#define CONFIG_MX53_UART1	1
+#define CONFIG_MXC_UART 1
+#define CONFIG_UART_BASE_ADDR   UART1_BASE_ADDR
 
 /*
  * Android support Configs
diff --git a/include/configs/mx53_arm2_ddr3.h b/include/configs/mx53_arm2_ddr3.h
index f4cd6ba..ea13cfd 100644
--- a/include/configs/mx53_arm2_ddr3.h
+++ b/include/configs/mx53_arm2_ddr3.h
@@ -69,8 +69,8 @@
 /*
  * Hardware drivers
  */
-#define CONFIG_MX53_UART	1
-#define CONFIG_MX53_UART1	1
+#define CONFIG_MXC_UART 1
+#define CONFIG_UART_BASE_ADDR   UART1_BASE_ADDR
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
diff --git a/include/configs/mx53_arm2_ddr3_android.h b/include/configs/mx53_arm2_ddr3_android.h
index dc97ba2..6fd0dff 100644
--- a/include/configs/mx53_arm2_ddr3_android.h
+++ b/include/configs/mx53_arm2_ddr3_android.h
@@ -69,8 +69,8 @@
 /*
  * Hardware drivers
  */
-#define CONFIG_MX53_UART	1
-#define CONFIG_MX53_UART1	1
+#define CONFIG_MXC_UART 1
+#define CONFIG_UART_BASE_ADDR   UART1_BASE_ADDR
 
 /*
  * Android support Configs
diff --git a/include/configs/mx53_evk.h b/include/configs/mx53_evk.h
index 0b1e75e..da0ac7f 100644
--- a/include/configs/mx53_evk.h
+++ b/include/configs/mx53_evk.h
@@ -69,8 +69,8 @@
 /*
  * Hardware drivers
  */
-#define CONFIG_MX53_UART	1
-#define CONFIG_MX53_UART1	1
+#define CONFIG_MXC_UART 1
+#define CONFIG_UART_BASE_ADDR   UART1_BASE_ADDR
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
diff --git a/include/configs/mx53_evk_android.h b/include/configs/mx53_evk_android.h
index d892d33..6b6ee17 100644
--- a/include/configs/mx53_evk_android.h
+++ b/include/configs/mx53_evk_android.h
@@ -69,8 +69,8 @@
 /*
  * Hardware drivers
  */
-#define CONFIG_MX53_UART	1
-#define CONFIG_MX53_UART1	1
+#define CONFIG_MXC_UART 1
+#define CONFIG_UART_BASE_ADDR   UART1_BASE_ADDR
 
 /*
  * Android support Configs