include/configs: Use new CONFIG_CMD_* in various a* named board config files.

Signed-off-by: Jon Loeliger <jdl@freescale.com>

9 files changed, 160 insertions, 145 deletions

diff --git a/include/configs/acadia.h b/include/configs/acadia.h
index 517d130..3f5d025 100644
--- a/include/configs/acadia.h
+++ b/include/configs/acadia.h
@@ -123,10 +123,8 @@
 #define CFG_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
 #define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 
-#define	_CFG_CMD_INCLUDE	(CFG_CMD_ALL)
 #else
 #define	CFG_NO_FLASH		1	/* No NOR on Acadia when NAND-booting	*/
-#define	_CFG_CMD_INCLUDE	((CFG_CMD_ALL) & ~(CFG_CMD_FLASH | CFG_CMD_IMLS))
 #endif
 
 #ifdef CFG_ENV_IS_IN_FLASH
@@ -301,27 +299,39 @@
 
 #define CONFIG_SUPPORT_VFAT
 
-#define CONFIG_COMMANDS	((CONFIG_CMD_DFL & _CFG_CMD_INCLUDE)	|	\
-			 CFG_CMD_ASKENV	|				\
-			 CFG_CMD_DHCP	|				\
-			 CFG_CMD_DTT	|				\
-			 CFG_CMD_DIAG	|				\
-			 CFG_CMD_EEPROM	|				\
-			 CFG_CMD_ELF	|				\
-			 CFG_CMD_FAT	|				\
-			 CFG_CMD_I2C	|				\
-			 CFG_CMD_IRQ	|				\
-			 CFG_CMD_MII	|				\
-			 CFG_CMD_NAND	|				\
-			 CFG_CMD_NET	|				\
-			 CFG_CMD_NFS	|				\
-			 CFG_CMD_PCI	|				\
-			 CFG_CMD_PING	|				\
-			 CFG_CMD_REGINFO |				\
-			 CFG_CMD_USB)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DTT
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_USB
+
+/*
+ * No NOR on Acadia when NAND-booting
+ */
+#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
+#undef CONFIG_CMD_FLASH
+#undef CONFIG_CMD_IMLS
+#endif
+
+
 
 #undef CONFIG_WATCHDOG					/* watchdog disabled		*/
 
@@ -330,7 +340,7 @@
  *----------------------------------------------------------------------*/
 #define CFG_LONGHELP			/* undef to save memory		*/
 #define CFG_PROMPT	        "=> "	/* Monitor Command Prompt	*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE	        1024	/* Console I/O Buffer Size	*/
 #else
 #define CFG_CBSIZE	        256	/* Console I/O Buffer Size	*/
@@ -373,7 +383,7 @@
  */
 #define CFG_DCACHE_SIZE		16384		/* For AMCC 405EZ CPU		*/
 #define CFG_CACHELINE_SIZE	32		/* ...				*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT	5		/* log base 2 of the above value*/
 #endif
 
@@ -489,7 +499,7 @@
 #define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
 #define BOOTFLAG_WARM	0x02		/* Software reboot			*/
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
   #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
   #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
diff --git a/include/configs/adsvix.h b/include/configs/adsvix.h
index c410891..0d64013 100644
--- a/include/configs/adsvix.h
+++ b/include/configs/adsvix.h
@@ -68,10 +68,19 @@
 
 #define CONFIG_DOS_PARTITION   1
 
-#define CONFIG_COMMANDS		((CONFIG_CMD_DFL & ~CFG_CMD_NET) | CFG_CMD_MMC | CFG_CMD_FAT | CFG_CMD_IDE | CFG_CMD_PCMCIA)
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_PCMCIA
+
+#undef CONFIG_CMD_NET
+
 
 #undef CONFIG_SHOW_BOOT_PROGRESS
 
@@ -162,7 +171,7 @@
 #define CONFIG_CMDLINE_TAG	 1	/* enable passing of ATAGs	*/
 /* #define CONFIG_INITRD_TAG	 1 */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400		/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
 #endif
diff --git a/include/configs/aev.h b/include/configs/aev.h
index f6f530c..ecd84d3 100644
--- a/include/configs/aev.h
+++ b/include/configs/aev.h
@@ -44,11 +44,6 @@
 #define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH  */
 #define BOOTFLAG_WARM		0x02	/* Software reboot	     */
 
-#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
-#endif
-
 /*
  * Serial console configuration
  */
@@ -98,27 +93,26 @@
 #define CFG_CMD_POST_DIAG 0
 #endif
 
+
 /*
- * Supported commands
+ * Command line configuration.
  */
-#define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
-				ADD_BMP_CMD	| \
-				CFG_CMD_PCI	| \
-				CFG_CMD_ASKENV	| \
-				CFG_CMD_DATE	| \
-				CFG_CMD_DHCP	| \
-				CFG_CMD_ECHO	| \
-				CFG_CMD_EEPROM	| \
-				CFG_CMD_I2C	| \
-				CFG_CMD_MII	| \
-				CFG_CMD_NFS	| \
-				CFG_CMD_PING	| \
-				CFG_CMD_POST_DIAG | \
-				CFG_CMD_REGINFO | \
-				CFG_CMD_SNTP	)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_POST
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SNTP
+
 
 #define	CONFIG_TIMESTAMP		/* display image timestamps */
 
@@ -324,7 +318,7 @@
  */
 #define CFG_LONGHELP			/* undef to save memory	    */
 #define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
 #else
 #define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
@@ -343,6 +337,11 @@
 
 #define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
 
+#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
+#if defined(CONFIG_CMD_KGDB)
+#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#endif
+
 /*
  * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined,
  * which is normally part of the default commands (CFV_CMD_DFL)
diff --git a/include/configs/alpr.h b/include/configs/alpr.h
index df057d9..27f2831 100644
--- a/include/configs/alpr.h
+++ b/include/configs/alpr.h
@@ -210,25 +210,28 @@
 
 #define CONFIG_NETCONSOLE		/* include NetConsole support	*/
 
-#define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
-				CFG_CMD_ASKENV	| \
-				CFG_CMD_DHCP	| \
-				CFG_CMD_DIAG	| \
-				CFG_CMD_EEPROM	| \
-				CFG_CMD_ELF	| \
-				CFG_CMD_I2C	| \
-				CFG_CMD_IRQ	| \
-				CFG_CMD_MII	| \
-				CFG_CMD_NET	| \
-				CFG_CMD_NFS	| \
-				CFG_CMD_PCI	| \
-				CFG_CMD_PING	| \
-				CFG_CMD_FPGA	| \
-				CFG_CMD_NAND	| \
-				CFG_CMD_REGINFO)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_FPGA
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+
 
 #undef CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -237,7 +240,7 @@
  */
 #define CFG_LONGHELP			/* undef to save memory		*/
 #define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
 #define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
@@ -358,7 +361,7 @@
 #define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
 #define BOOTFLAG_WARM	0x02		/* Software reboot			*/
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
diff --git a/include/configs/armadillo.h b/include/configs/armadillo.h
index 9a1c559..7c77fa7 100644
--- a/include/configs/armadillo.h
+++ b/include/configs/armadillo.h
@@ -73,10 +73,12 @@
 
 #define CONFIG_BOOTP_MASK       (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE)
 
-#define CONFIG_COMMANDS		(CONFIG_CMD_DFL) /* | CFG_CMD_JFFS2)*/
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
 
 #define CONFIG_BOOTDELAY	3
 #define CONFIG_BOOTARGS    	"root=/dev/ram0 rootfstype=ext2 console=ttyAM0,115200"
diff --git a/include/configs/assabet.h b/include/configs/assabet.h
index 1a69ebe..7c6a65a 100644
--- a/include/configs/assabet.h
+++ b/include/configs/assabet.h
@@ -66,18 +66,23 @@
 
 #define CONFIG_BAUDRATE		115200
 
-#define CONFIG_COMMANDS		(CONFIG_CMD_DFL | CFG_CMD_DHCP)
-#define CONFIG_BOOTP_MASK	CONFIG_BOOTP_DEFAULT
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+
+
+#define CONFIG_BOOTP_MASK	CONFIG_BOOTP_DEFAULT
 
 #define CONFIG_BOOTDELAY	3
 #define CONFIG_BOOTARGS		"console=ttySA0,115200n8 root=/dev/nfs ip=bootp"
 #define CONFIG_BOOTCOMMAND	"bootp;tftp;bootm"
 #define CFG_AUTOLOAD            "n"	/* No autoload */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	115200	/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
diff --git a/include/configs/at91rm9200dk.h b/include/configs/at91rm9200dk.h
index 8fad55d..db57dc1 100644
--- a/include/configs/at91rm9200dk.h
+++ b/include/configs/at91rm9200dk.h
@@ -97,18 +97,22 @@
 #define CONFIG_BOOTDELAY      3
 /* #define CONFIG_ENV_OVERWRITE	1 */
 
-#define CONFIG_COMMANDS		\
-		       ((CONFIG_CMD_DFL | CFG_CMD_MII |\
-			CFG_CMD_DHCP ) & \
-		      ~(CFG_CMD_BDI | \
-			CFG_CMD_IMI | \
-			CFG_CMD_AUTOSCRIPT | \
-			CFG_CMD_FPGA | \
-			CFG_CMD_MISC | \
-			CFG_CMD_LOADS ))
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_DHCP
+
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_IMI
+#undef CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_MISC
+#undef CONFIG_CMD_LOADS
+
 
 #define CFG_MAX_NAND_DEVICE	1	/* Max number of NAND devices		*/
 #define SECTORSIZE 512
diff --git a/include/configs/atc.h b/include/configs/atc.h
index bf6c170..cb4e747 100644
--- a/include/configs/atc.h
+++ b/include/configs/atc.h
@@ -126,25 +126,27 @@
 
 #define CONFIG_BOOTP_MASK	(CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE)
 
-#define CONFIG_COMMANDS		(CONFIG_CMD_DFL | \
-				 CFG_CMD_EEPROM | \
-				 CFG_CMD_PCI | \
-				 CFG_CMD_PCMCIA | \
-				 CFG_CMD_DATE | \
-				 CFG_CMD_IDE)
 
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
 
-#define CONFIG_DOS_PARTITION
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PCMCIA
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_IDE
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+#define CONFIG_DOS_PARTITION
 
 /*
  * Miscellaneous configurable options
  */
 #define	CFG_LONGHELP			/* undef to save memory		*/
 #define	CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
 #define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
@@ -285,7 +287,7 @@
  * Cache Configuration
  */
 #define CFG_CACHELINE_SIZE      32      /* For MPC8260 CPU              */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 # define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h
index beaf385..90fe8a5 100644
--- a/include/configs/atstk1002.h
+++ b/include/configs/atstk1002.h
@@ -111,44 +111,25 @@
 #define CONFIG_BOOTP_MASK		(CONFIG_BOOTP_SUBNETMASK	\
 					 | CONFIG_BOOTP_GATEWAY)
 
-#define CONFIG_COMMANDS			(CFG_CMD_BDI			\
-					 | CFG_CMD_LOADS		\
-					 | CFG_CMD_LOADB		\
-					 | CFG_CMD_IMI			\
-					 /* | CFG_CMD_CACHE */		\
-					 | CFG_CMD_FLASH		\
-					 | CFG_CMD_MEMORY		\
-					 | CFG_CMD_NET			\
-					 | CFG_CMD_ENV			\
-					 /* | CFG_CMD_IRQ */		\
-					 | CFG_CMD_BOOTD		\
-					 | CFG_CMD_CONSOLE		\
-					 /* | CFG_CMD_EEPROM */		\
-					 | CFG_CMD_ASKENV		\
-					 | CFG_CMD_RUN			\
-					 | CFG_CMD_ECHO			\
-					 /* | CFG_CMD_I2C */		\
-					 | CFG_CMD_REGINFO		\
-					 /* | CFG_CMD_DATE */		\
-					 | CFG_CMD_DHCP			\
-					 /* | CFG_CMD_AUTOSCRIPT */	\
-					 /* | CFG_CMD_MII */		\
-					 | CFG_CMD_MISC			\
-					 /* | CFG_CMD_SDRAM */		\
-					 /* | CFG_CMD_DIAG */		\
-					 /* | CFG_CMD_HWFLOW */		\
-					 /* | CFG_CMD_SAVES */		\
-					 /* | CFG_CMD_SPI */		\
-					 /* | CFG_CMD_PING */		\
-					 | CFG_CMD_MMC			\
-					 | CFG_CMD_FAT			\
-					 | CFG_CMD_IMLS			\
-					 /* | CFG_CMD_ITEST */		\
-					 | CFG_CMD_EXT2			\
-					 | CFG_CMD_JFFS2		\
-		)
-
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_REGINFO
+
+#undef CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_SETGETDCR
+#undef CONFIG_CMD_XIMG
+
+
 
 #define CONFIG_ATMEL_USART		1
 #define CONFIG_MACB			1