Revert merge of git://www.denx.de/git/u-boot-arm, commit 62479b18:

Reverting became necessary after it turned out that the patches in
the u-boot-arm repo were modified, and in some cases corrupted.

This reverts the following commits:

	066bebd6353e33af3adefc3404560871699e9961
	7a837b7310166ae8fc8b8d66d7ef01b60a80f9d6
	c88ae20580b2b01487b4cdcc8b2a113f551aee36
	a147e56f03871bba4f05058d5e04ce7deb010b04
	d6674e0e2a6a1f033945f78838566210d3f28c95
	8c8463cce44d849e37744749b32d38e1dfb12e50
	c98b47ad24b2d91f41c09a3d62d7f70ad84f4b7d
	8bf69d81782619187933a605f1a95ee1d069478d
	8c16cb0d3b971f46fbe77c072664c0f2dcd4471d
	a574a73852a527779234e73e17e7597fd8128882
	1377b5583a48021d983e1fd565f7d40c89e84d63
	1704dc20917b4f71e373e2c888497ee666d40380

Signed-off-by: Wolfgang Denk <wd@denx.de>

7 files changed, 9 insertions, 785 deletions

diff --git a/include/configs/davinci_dvevm.h b/include/configs/davinci_dvevm.h
index 17d3b03..8ecd059 100644
--- a/include/configs/davinci_dvevm.h
+++ b/include/configs/davinci_dvevm.h
@@ -52,9 +52,6 @@
 #define DV_EVM
 #define CFG_NAND_SMALLPAGE
 #define CFG_USE_NOR
-#define CFG_USE_INTEL_NOR	/* Define this when your DVEVM has Intel
-				 * flash instead of AMD flash
-				 */
 /*===================*/
 /* SoC Configuration */
 /*===================*/
@@ -63,24 +60,6 @@
 #define CFG_TIMERBASE		0x01c21400	/* use timer 0 */
 #define CFG_HZ_CLOCK		27000000	/* Timer Input clock freq */
 #define CFG_HZ			1000
-#define CFG_DAVINCI_PINMUX_0	0x00000c1f
-#define CFG_DAVINCI_WAITCFG	0x00000000
-#define CFG_DAVINCI_ACFG2	0x3ffffffd	/* CE configs */
-#define CFG_DAVINCI_ACFG3	0x3ffffffd
-#define CFG_DAVINCI_ACFG4	0x3ffffffd
-#define CFG_DAVINCI_ACFG5	0x3ffffffd
-#undef	CFG_DAVINCI_NANDCE		/* When using NAND, define 2,3 or 4 */
-#define CFG_DAVINCI_DDRCTL	0x50006405	/* DDR timing config */
-#define CFG_DAVINCI_SDREF	0x000005c3
-#define CFG_DAVINCI_SDCFG	0x00178632	/* 8 banks */
-#define CFG_DAVINCI_SDTIM0	0x28923211
-#define CFG_DAVINCI_SDTIM1	0x0016c722
-#define CFG_DAVINCI_MMARG_BRF0	0x00444400
-/* DM6446 = 0x15, DM6441 = 0x12, DM6441_LV = 0x0e */
-#define CFG_DAVINCI_PLL1_PLLM	0x15
-#define CFG_DAVINCI_PLL2_PLLM	0x17		/* 162 MHz */
-#define CFG_DAVINCI_PLL2_DIV1	0x0b		/* 54 MHz */
-#define CFG_DAVINCI_PLL2_DIV2	0x01
 /*====================================================*/
 /* EEPROM definitions for Atmel 24C256BN SEEPROM chip */
 /* on Sonata/DV_EVM board. No EEPROM on schmoogie.    */
@@ -135,7 +114,7 @@
 #ifdef CFG_USE_NAND
 #undef CFG_ENV_IS_IN_FLASH
 #define CFG_NO_FLASH
-#define CFG_ENV_IS_IN_NAND		/* U-Boot env in NAND Flash */
+#define CFG_ENV_IS_IN_NAND		/* U-Boot env in NAND Flash  */
 #ifdef CFG_NAND_SMALLPAGE
 #define CFG_ENV_SECT_SIZE	512	/* Env sector Size */
 #define CFG_ENV_SIZE		SZ_16K
@@ -160,31 +139,24 @@
 #undef CONFIG_SKIP_RELOCATE_UBOOT
 #endif
 #define CFG_ENV_IS_IN_FLASH
-#undef	CFG_NO_FLASH
+#undef CFG_NO_FLASH
 #define CFG_FLASH_CFI_DRIVER
 #define CFG_FLASH_CFI
 #define CFG_MAX_FLASH_BANKS	1		/* max number of flash banks */
-#define CFG_ENV_ADDR		(PHYS_FLASH_1 + 0x40000)
-#define CFG_ENV_OFFSET		(CFG_ENV_ADDR)
-#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
-#define PHYS_FLASH_1		0x02000000	/* CS2 Base address */
+#define CFG_FLASH_SECT_SZ	0x10000		/* 64KB sect size AMD Flash */
+#define CFG_ENV_OFFSET		(CFG_FLASH_SECT_SZ*3)
+#define PHYS_FLASH_1		0x02000000	/* CS2 Base address 	 */
 #define CFG_FLASH_BASE		PHYS_FLASH_1	/* Flash Base for U-Boot */
-#define PHYS_FLASH_SIZE		0x2000000	/* Flash size 32MB */
+#define PHYS_FLASH_SIZE		0x2000000	/* Flash size 32MB 	 */
 #define CFG_MAX_FLASH_SECT	(PHYS_FLASH_SIZE/CFG_FLASH_SECT_SZ)
 #define CFG_ENV_SECT_SIZE	CFG_FLASH_SECT_SZ	/* Env sector Size */
-#ifdef CFG_USE_INTEL_NOR
-#define CFG_FLASH_SECT_SZ	0x20000	/* 128KB sect size INTEL Flash */
-#define CFG_FLASH_PROTECTION	1
-#else
-#define CFG_FLASH_SECT_SZ	0x10000	/* 64KB sect size AMD Flash */
-#endif
 #endif
 /*==============================*/
 /* U-Boot general configuration */
 /*==============================*/
-#undef	CONFIG_USE_IRQ				/* No IRQ/FIQ in U-Boot */
+#undef 	CONFIG_USE_IRQ			/* No IRQ/FIQ in U-Boot */
 #define CONFIG_MISC_INIT_R
-#undef	CONFIG_BOOTDELAY
+#undef CONFIG_BOOTDELAY
 #define CONFIG_BOOTFILE		"uImage"	/* Boot file name */
 #define CFG_PROMPT		"U-Boot > "	/* Monitor Command Prompt */
 #define CFG_CBSIZE		1024		/* Console I/O Buffer Size  */
diff --git a/include/configs/davinci_schmoogie.h b/include/configs/davinci_schmoogie.h
index cb69535..96c9a30 100644
--- a/include/configs/davinci_schmoogie.h
+++ b/include/configs/davinci_schmoogie.h
@@ -35,24 +35,6 @@
 #define CFG_TIMERBASE		0x01c21400	/* use timer 0 */
 #define CFG_HZ_CLOCK		27000000	/* Timer Input clock freq */
 #define CFG_HZ			1000
-#define CFG_DAVINCI_PINMUX_0	0x00000c1f
-#define CFG_DAVINCI_WAITCFG	0x00000000
-#define CFG_DAVINCI_ACFG2	0x0432229c	/* CE configs */
-#define CFG_DAVINCI_ACFG3	0x3ffffffd
-#define CFG_DAVINCI_ACFG4	0x3ffffffd
-#define CFG_DAVINCI_ACFG5	0x3ffffffd
-#define CFG_DAVINCI_NANDCE	2 	/* When using NAND, define 2,3 or 4 */
-#define CFG_DAVINCI_DDRCTL	0x50006405	/* DDR timing config */
-#define CFG_DAVINCI_SDREF	0x000005c3
-#define CFG_DAVINCI_SDCFG	0x00178622	/* 4 banks */
-#define CFG_DAVINCI_SDTIM0	0x28923211
-#define CFG_DAVINCI_SDTIM1	0x0016c722
-#define CFG_DAVINCI_MMARG_BRF0	0x00444400
-/* DM6446 = 0x15, DM6441 = 0x12, DM6441_LV = 0x0e */
-#define CFG_DAVINCI_PLL1_PLLM	0x15
-#define CFG_DAVINCI_PLL2_PLLM	0x17		/* 162 MHz */
-#define CFG_DAVINCI_PLL2_DIV1	0x0b		/* 54 MHz */
-#define CFG_DAVINCI_PLL2_DIV2	0x01
 /*=============*/
 /* Memory Info */
 /*=============*/
@@ -64,6 +46,7 @@
 #define CONFIG_STACKSIZE	(256*1024)	/* regular stack */
 #define PHYS_SDRAM_1		0x80000000	/* DDR Start */
 #define PHYS_SDRAM_1_SIZE	0x08000000	/* DDR size 128MB */
+#define DDR_4BANKS				/* 4-bank DDR2 (128MB) */
 /*====================*/
 /* Serial Driver info */
 /*====================*/
diff --git a/include/configs/davinci_sonata.h b/include/configs/davinci_sonata.h
index b2c0d7d..de8c4fa 100644
--- a/include/configs/davinci_sonata.h
+++ b/include/configs/davinci_sonata.h
@@ -60,24 +60,6 @@
 #define CFG_TIMERBASE		0x01c21400	/* use timer 0 */
 #define CFG_HZ_CLOCK		27000000	/* Timer Input clock freq */
 #define CFG_HZ			1000
-#define CFG_DAVINCI_PINMUX_0	0x00000c1f
-#define CFG_DAVINCI_WAITCFG	0x00000000
-#define CFG_DAVINCI_ACFG2	0x3ffffffd	/* CE configs */
-#define CFG_DAVINCI_ACFG3	0x3ffffffd
-#define CFG_DAVINCI_ACFG4	0x3ffffffd
-#define CFG_DAVINCI_ACFG5	0x3ffffffd
-#undef  CFG_DAVINCI_NANDCE    		/* When using NAND, define 2,3 or 4 */
-#define CFG_DAVINCI_DDRCTL	0x50006405	/* DDR timing config */
-#define CFG_DAVINCI_SDREF	0x000005c3
-#define CFG_DAVINCI_SDCFG	0x00178632	/* 8 banks */
-#define CFG_DAVINCI_SDTIM0	0x28923211
-#define CFG_DAVINCI_SDTIM1	0x0016c722
-#define CFG_DAVINCI_MMARG_BRF0	0x00444400
-/* DM6446 = 0x15, DM6441 = 0x12, DM6441_LV = 0x0e */
-#define CFG_DAVINCI_PLL1_PLLM	0x15
-#define CFG_DAVINCI_PLL2_PLLM	0x17		/* 162 MHz */
-#define CFG_DAVINCI_PLL2_DIV1	0x0b		/* 54 MHz */
-#define CFG_DAVINCI_PLL2_DIV2	0x01
 /*====================================================*/
 /* EEPROM definitions for Atmel 24C256BN SEEPROM chip */
 /* on Sonata/DV_EVM board. No EEPROM on schmoogie.    */
diff --git a/include/configs/imx31_litekit.h b/include/configs/imx31_litekit.h
deleted file mode 100644
index a6ed77a..0000000
--- a/include/configs/imx31_litekit.h
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- * (C) Copyright 2004
- * Texas Instruments.
- * Richard Woodruff <r-woodruff2@ti.com>
- * Kshitij Gupta <kshitij@ti.com>
- *
- * Configuration settings for the 242x TI H4 board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
- /* High Level Configuration Options */
-#define CONFIG_ARM1136		1    /* This is an arm1136 CPU core */
-#define CONFIG_MX31		1    /* in a mx31 */
-#define CONFIG_MX31_HCLK_FREQ	26000000
-#define CONFIG_MX31_CLK32	32000
-
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-
-/* Temporarily disabled */
-#if 0
-#define CONFIG_OF_LIBFDT		1
-#define CONFIG_FIT			1
-#define CONFIG_FIT_VERBOSE		1
-#endif
-
-#define CONFIG_CMDLINE_TAG		1    /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS	1
-#define CONFIG_INITRD_TAG		1
-
-/*
- * Size of malloc() pool
- */
-#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128 * 1024)
-#define CFG_GBL_DATA_SIZE	128  /* num bytes reserved for initial data */
-
-/*
- * Hardware drivers
- */
-
-#define CONFIG_MX31_UART	1
-#define CFG_MX31_UART1		1
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_CONS_INDEX	1
-#define CONFIG_BAUDRATE		115200
-#define CFG_BAUDRATE_TABLE	{9600, 19200, 38400, 57600, 115200}
-
-/***********************************************************
- * Command definition
- ***********************************************************/
-
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-
-#define CONFIG_BOOTDELAY	3
-
-#define CONFIG_NETMASK		255.255.255.0
-#define CONFIG_IPADDR		192.168.23.168
-#define CONFIG_SERVERIP		192.168.23.2
-
-#define	CONFIG_EXTRA_ENV_SETTINGS				\
-	"bootargs_base=setenv bootargs console=ttySMX0,115200\0"	\
-	"bootargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs "	\
-		"ip=dhcp nfsroot=$(serverip):$(nfsrootfs), v3, tcp\0"	\
-	"bootcmd=run bootcmd_net\0"					\
-	"bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs; "	\
-		"tftpboot 0x80000000 uImage-mx31; bootm\0"		\
-	"prg_uboot=tftpboot 0x80000000 u-boot-imx31_litekit.bin; "	\
-		"protect off all; erase 0xa00d0000 0xa01effff; "	\
-		"cp.b 0x80000000 0xa00d0000 $(filesize)\0"
-
-#define CONFIG_DRIVER_SMC911X		1
-#define CONFIG_DRIVER_SMC911X_BASE	0xb4020000
-
-/*
- * Miscellaneous configurable options
- */
-#define CFG_LONGHELP		/* undef to save memory */
-#define CFG_PROMPT		"uboot> "
-#define CFG_CBSIZE		256  /* Console I/O Buffer Size */
-/* Print Buffer Size */
-#define CFG_PBSIZE		(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
-#define CFG_MAXARGS		16          /* max number of command args */
-#define CFG_BARGSIZE		CFG_CBSIZE  /* Boot Argument Buffer Size */
-
-#define CFG_MEMTEST_START	0  /* memtest works on */
-#define CFG_MEMTEST_END		0x10000
-
-#undef	CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
-
-#define CFG_LOAD_ADDR		0 /* default load address */
-
-#define CFG_HZ			32000
-
-#define CONFIG_CMDLINE_EDITING	1
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE	(128 * 1024) /* regular stack */
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS	1
-#define PHYS_SDRAM_1		0x80000000
-#define PHYS_SDRAM_1_SIZE	(128 * 1024 * 1024)
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#define CFG_FLASH_BASE		0xa0000000
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
-#define CFG_MAX_FLASH_SECT	128	/* max number of sectors on one chip */
-/* Monitor at beginning of flash */
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-
-#define CFG_ENV_ADDR		0xa01f0000
-#define	CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_SECT_SIZE	(64 * 1024)
-#define CFG_ENV_SIZE		(64 * 1024)
-
-/*-----------------------------------------------------------------------
- * CFI FLASH driver setup
- */
-#define CFG_FLASH_CFI		1	/* Flash memory is CFI compliant */
-#define CFG_FLASH_CFI_DRIVER	1	/* Use drivers/cfi_flash.c */
-#define CFG_FLASH_USE_BUFFER_WRITE 1	/* Use buffered writes (~10x faster) */
-#define CFG_FLASH_PROTECTION	1	/* Use hardware sector protection */
-
-/* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT	(100*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT	(100*CFG_HZ) /* Timeout for Flash Write */
-
-/*
- * JFFS2 partitions
- */
-#undef CONFIG_JFFS2_CMDLINE
-#define CONFIG_JFFS2_DEV	"nor0"
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/imx31_phycore.h b/include/configs/imx31_phycore.h
deleted file mode 100644
index 647b05b..0000000
--- a/include/configs/imx31_phycore.h
+++ /dev/null
@@ -1,190 +0,0 @@
-/*
- * (C) Copyright 2004
- * Texas Instruments.
- * Richard Woodruff <r-woodruff2@ti.com>
- * Kshitij Gupta <kshitij@ti.com>
- *
- * Configuration settings for the 242x TI H4 board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
- /* High Level Configuration Options */
-#define CONFIG_ARM1136		1    /* This is an arm1136 CPU core */
-#define CONFIG_MX31		1    /* in a mx31 */
-#define CONFIG_MX31_HCLK_FREQ	26000000
-#define CONFIG_MX31_CLK32	32000
-
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-
-/* Temporarily disabled */
-#if 0
-#define CONFIG_OF_LIBFDT		1
-#define CONFIG_FIT			1
-#define CONFIG_FIT_VERBOSE		1
-#endif
-
-#define CONFIG_CMDLINE_TAG		1    /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS	1
-#define CONFIG_INITRD_TAG		1
-
-/*
- * Size of malloc() pool
- */
-#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128 * 1024)
-#define CFG_GBL_DATA_SIZE	128  /* num bytes reserved for initial data */
-
-/*
- * Hardware drivers
- */
-
-#define CONFIG_HARD_I2C		1
-#define CONFIG_I2C_MXC		1
-#define CFG_I2C_MX31_PORT2	1
-#define CFG_I2C_SPEED		100000
-#define CFG_I2C_SLAVE		0xfe
-
-#define CONFIG_MX31_UART	1
-#define CFG_MX31_UART1		1
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_CONS_INDEX	1
-#define CONFIG_BAUDRATE		115200
-#define CFG_BAUDRATE_TABLE	{9600, 19200, 38400, 57600, 115200}
-
-/***********************************************************
- * Command definition
- ***********************************************************/
-
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_I2C
-
-#define CONFIG_BOOTDELAY	3
-
-#define MTDPARTS_DEFAULT	\
-	"mtdparts=physmap-flash.0:128k(uboot)ro,1536k(kernel),-(root)"
-
-#define CONFIG_NETMASK		255.255.255.0
-#define CONFIG_IPADDR		192.168.23.168
-#define CONFIG_SERVERIP		192.168.23.2
-
-#define	CONFIG_EXTRA_ENV_SETTINGS				\
-	"bootargs_base=setenv bootargs console=ttySMX0,115200\0"	\
-	"bootargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs "	\
-		"ip=dhcp nfsroot=$(serverip):$(nfsrootfs),v3,tcp\0"	\
-	"bootargs_flash=setenv bootargs $(bootargs) "			\
-		"root=/dev/mtdblock2 rootfstype=jffs2\0"		\
-	"bootargs_mtd=setenv bootargs $(bootargs) $(mtdparts)\0"	\
-	"bootcmd=run bootcmd_net\0"			       		\
-	"bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs; " 	\
-		"tftpboot 0x80000000 $(uimage); bootm\0"		\
-	"bootcmd_flash=run bootargs_base bootargs_mtd bootargs_flash; "	\
-		"bootm 0x80000000\0"					\
-	"unlock=yes\0"							\
-	"mtdparts=" MTDPARTS_DEFAULT "\0"				\
-	"prg_uboot=tftpboot 0x80000000 $(uboot); " 			\
-		"protect off 0xa0000000 +0x20000; "			\
-		"erase 0xa0000000 +0x20000; "				\
-		"cp.b 0x80000000 0xa0000000 $(filesize)\0" 		\
-	"prg_kernel=tftpboot 0x80000000 $(uimage); "			\
-		"erase 0xa0040000 +0x180000; "				\
-		"cp.b 0x80000000 0xa0040000 $(filesize)\0"		\
-	"prg_jffs2=tftpboot 0x80000000 $(jffs2); " 			\
-		"erase 0xa01c0000 0xa1ffffff; "				\
-		"cp.b 0x80000000 0xa01c0000 $(filesize)\0"
-
-#define CONFIG_DRIVER_SMC911X		1
-#define CONFIG_DRIVER_SMC911X_BASE	0xa8000000
-
-/*
- * Miscellaneous configurable options
- */
-#define CFG_LONGHELP		/* undef to save memory */
-#define CFG_PROMPT		"uboot> "
-#define CFG_CBSIZE		256  /* Console I/O Buffer Size */
-/* Print Buffer Size */
-#define CFG_PBSIZE		(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
-#define CFG_MAXARGS		16          /* max number of command args */
-#define CFG_BARGSIZE		CFG_CBSIZE  /* Boot Argument Buffer Size */
-
-#define CFG_MEMTEST_START	0  /* memtest works on */
-#define CFG_MEMTEST_END		0x10000
-
-#define CFG_LOAD_ADDR		0 /* default load address */
-
-#define CFG_HZ			32000
-
-#define CONFIG_CMDLINE_EDITING	1
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below  */
-#define CONFIG_STACKSIZE	(128 * 1024) /* regular stack */
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS	1
-#define PHYS_SDRAM_1		0x80000000
-#define PHYS_SDRAM_1_SIZE	(128 * 1024 * 1024)
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#define CFG_FLASH_BASE		0xa0000000
-#define CFG_MAX_FLASH_BANKS	1 /* max number of memory banks */
-#define CFG_MAX_FLASH_SECT	259 /* max number of sectors on one chip */
-#define CFG_MONITOR_BASE CFG_FLASH_BASE /* Monitor at beginning of flash */
-
-#define	CFG_ENV_IS_IN_EEPROM		1
-#define CFG_ENV_OFFSET			0x00	/* environment starts here */
-#define CFG_ENV_SIZE			4096
-#define CFG_I2C_EEPROM_ADDR		0x52
-#define CFG_EEPROM_PAGE_WRITE_BITS	5	/* 5 bits = 32 octets */
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10	/* between stop and start */
-#define CFG_I2C_EEPROM_ADDR_LEN		2 /* length of byte address */
-
-/*-----------------------------------------------------------------------
- * CFI FLASH driver setup
- */
-#define CFG_FLASH_CFI		1	/* Flash memory is CFI compliant */
-#define CFG_FLASH_CFI_DRIVER	1	/* Use drivers/cfi_flash.c */
-#define CFG_FLASH_USE_BUFFER_WRITE 1	/* Use buffered writes (~10x faster) */
-#define CFG_FLASH_PROTECTION	1	/* Use hardware sector protection */
-
-/* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT	(100*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT	(100*CFG_HZ) /* Timeout for Flash Write */
-
-/*
- * JFFS2 partitions
- */
-#undef CONFIG_JFFS2_CMDLINE
-#define CONFIG_JFFS2_DEV	"nor0"
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/mx31ads.h b/include/configs/mx31ads.h
deleted file mode 100644
index be7f3c6..0000000
--- a/include/configs/mx31ads.h
+++ /dev/null
@@ -1,170 +0,0 @@
-/*
- * Copyright (C) 2008, Guennadi Liakhovetski <lg@denx.de>
- *
- * Configuration settings for the MX31ADS Freescale board.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <asm/arch/mx31-regs.h>
-
- /* High Level Configuration Options */
-#define CONFIG_ARM1136		1	/* This is an arm1136 CPU core */
-#define CONFIG_MX31		1	/* in a mx31 */
-#define CONFIG_MX31_HCLK_FREQ	26000000	/* RedBoot says 26MHz */
-#define CONFIG_MX31_CLK32	32000
-
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-
-/*
- * Disabled for now due to build problems under Debian and
- * a significant increase in the final file size: 144260 vs. 109536 Bytes
- */
-#if 0
-#define CONFIG_OF_LIBFDT		1
-#define CONFIG_FIT			1
-#define CONFIG_FIT_VERBOSE		1
-#endif
-
-#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS	1
-#define CONFIG_INITRD_TAG		1
-
-/*
- * Size of malloc() pool
- */
-#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128 * 1024)
-#define CFG_GBL_DATA_SIZE	128  /* num bytes reserved for initial data */
-
-/*
- * Hardware drivers
- */
-
-#define CONFIG_MX31_UART	1
-#define CFG_MX31_UART1		1
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_CONS_INDEX	1
-#define CONFIG_BAUDRATE		115200
-#define CFG_BAUDRATE_TABLE	{9600, 19200, 38400, 57600, 115200}
-
-/***********************************************************
- * Command definition
- ***********************************************************/
-
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-
-#define CONFIG_BOOTDELAY	3
-
-#define CONFIG_NETMASK		255.255.255.0
-#define CONFIG_IPADDR		192.168.23.168
-#define CONFIG_SERVERIP		192.168.23.2
-
-#define	CONFIG_EXTRA_ENV_SETTINGS				\
-	"bootargs_base=setenv bootargs console=ttymxc0,115200\0"	\
-	"bootargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs "	\
-		"ip=dhcp nfsroot=$(serverip):$(nfsrootfs),v3,tcp\0"	\
-	"bootcmd=run bootcmd_net\0"  					\
-	"bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs; " 	\
-		"tftpboot 0x80000000 uImage-mx31; bootm\0"		\
-	"prg_uboot=tftpboot 0x80000000 u-boot-mx31ads.bin; " 		\
-		"protect off 0xa0000000 0xa001ffff; "			\
-		"erase 0xa0000000 0xa001ffff; "				\
-		"cp.b 0x80000000 0xa0000000 $(filesize)\0"
-
-#define CONFIG_DRIVER_CS8900	1
-#define CS8900_BASE		0xb4020300
-#define CS8900_BUS16		1 /* the Linux driver does accesses as shorts */
-
-/*
- * Miscellaneous configurable options
- */
-#define CFG_LONGHELP		/* undef to save memory */
-#define CFG_PROMPT		"=> "
-#define CFG_CBSIZE		256		/* Console I/O Buffer Size */
-/* Print Buffer Size */
-#define CFG_PBSIZE		(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
-#define CFG_MAXARGS		16		/* max number of command args */
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size */
-
-#define CFG_MEMTEST_START	0		/* memtest works on */
-#define CFG_MEMTEST_END		0x10000
-
-#undef	CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
-
-#define CFG_LOAD_ADDR		CSD0_BASE	/* default load address */
-
-#define CFG_HZ			32000
-
-#define CONFIG_CMDLINE_EDITING	1
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below  */
-#define CONFIG_STACKSIZE	(128 * 1024)	/* regular stack */
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS	1
-#define PHYS_SDRAM_1		CSD0_BASE
-#define PHYS_SDRAM_1_SIZE	(128 * 1024 * 1024)
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#define CFG_FLASH_BASE		CS0_BASE
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
-#define CFG_MAX_FLASH_SECT	262	/* max number of sectors on one chip */
-#define CFG_MONITOR_BASE CFG_FLASH_BASE /* Monitor at beginning of flash */
-#define CFG_MONITOR_LEN		(128 * 1024)	/* Reserve 128KiB */
-
-#define	CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_SECT_SIZE	(32 * 1024)
-#define CFG_ENV_SIZE		CFG_ENV_SECT_SIZE
-/* S29WS256N NOR flash has 4 32KiB small sectors at beginning and end.
- * The rest of 32MiB is in 128KiB big sectors.
- * U-Boot occupies the low 4 sectors,
- * if we put environment next to it, we will have to occupy 128KiB for it.
- * Putting it at the top of flash we use only 32KiB. */
-#define CFG_ENV_ADDR	(CFG_MONITOR_BASE + 32 * 1024 * 1024 - CFG_ENV_SIZE)
-
-/*-----------------------------------------------------------------------
- * CFI FLASH driver setup
- */
-#define CFG_FLASH_CFI			1 /* Flash memory is CFI compliant */
-#define CFG_FLASH_CFI_DRIVER		1 /* Use drivers/cfi_flash.c */
-#if 0 /* Doesn't work yet, work in progress */
-#define CFG_FLASH_USE_BUFFER_WRITE	1 /* Use buffered writes(~10x faster)*/
-#endif
-#define CFG_FLASH_PROTECTION		1 /* Use hardware sector protection */
-
-/*
- * JFFS2 partitions
- */
-#undef CONFIG_JFFS2_CMDLINE
-#define CONFIG_JFFS2_DEV	"nor0"
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/pmdra.h b/include/configs/pmdra.h
deleted file mode 100644
index e170ee9..0000000
--- a/include/configs/pmdra.h
+++ /dev/null
@@ -1,186 +0,0 @@
-/*
- * Copyright (C) 2008 Prodrive BV <pieter.voorthijsen@prodrive.nl>
- *
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-#include <asm/sizes.h>
-
-/*=======*/
-/* Board */
-/*=======*/
-#define CFG_PMDRA
-#define CFG_NAND_LARGEPAGE
-/*===================*/
-/* SoC Configuration */
-/*===================*/
-#define CONFIG_ARM926EJS			/* arm926ejs CPU core */
-#define CONFIG_SYS_CLK_FREQ	((CFG_HZ_CLOCK * (CFG_DAVINCI_PLL1_PLLM + 1))/2)
-#define CFG_TIMERBASE		0x01c21400	/* use timer 0 */
-#define CFG_HZ_CLOCK		27000000	/* Timer Input clock freq */
-#define CFG_HZ			1000
-#define CFG_DAVINCI_PINMUX_0	0x00000c1f
-#define CFG_DAVINCI_WAITCFG	0x10000000
-#define CFG_DAVINCI_ACFG2	0x00460385	/* NOR CE Config */
-#define CFG_DAVINCI_ACFG3	0x0822218c	/* NAND CE Config */
-#define CFG_DAVINCI_ACFG4	0x3ffffffd
-#define CFG_DAVINCI_ACFG5	0x3ffffffd
-#define CFG_DAVINCI_NANDCE	3		/* Use CE3 for NAND */
-#define CFG_DAVINCI_DDRCTL	0x50006405	/* DDR timing config */
-#define CFG_DAVINCI_SDREF	0x000005c3
-#define CFG_DAVINCI_SDCFG	0x00178832	/* 8 banks , CAS = 4*/
-#define CFG_DAVINCI_SDTIM0	0x28923211
-#define CFG_DAVINCI_SDTIM1	0x0016c722
-#define CFG_DAVINCI_MMARG_BRF0	0x00444400
-/* DM6446 = 0x15, DM6441 = 0x12, DM6441_LV = 0x0e */
-#define CFG_DAVINCI_PLL1_PLLM	0x12
-#define CFG_DAVINCI_PLL2_PLLM	0x17		/* 162 MHz */
-#define CFG_DAVINCI_PLL2_DIV1	0x0b		/* 54 MHz */
-#define CFG_DAVINCI_PLL2_DIV2	0x01
-/*====================================================*/
-/* EEPROM definitions for Atmel 24C256BN SEEPROM chip */
-/* on Sonata/DV_EVM board. No EEPROM on schmoogie.    */
-/*====================================================*/
-#define CFG_I2C_EEPROM_ADDR_LEN		2
-#define CFG_I2C_EEPROM_ADDR		0x50
-#define CFG_EEPROM_PAGE_WRITE_BITS	6
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	20
-/*=============*/
-/* Memory Info */
-/*=============*/
-#define CFG_MALLOC_LEN		(0x10000 + 128*1024)	/* malloc() len */
-#define CFG_GBL_DATA_SIZE	128		/* reserved for initial data */
-#define CFG_MEMTEST_START	0x80000000	/* memtest start address */
-#define CFG_MEMTEST_END		0x81000000	/* 16MB RAM test */
-#define CONFIG_NR_DRAM_BANKS	1		/* we have 1 bank of DRAM */
-#define CONFIG_STACKSIZE	(256*1024)	/* regular stack */
-#define PHYS_SDRAM_1		0x80000000	/* DDR Start */
-#define PHYS_SDRAM_1_SIZE	0x10000000	/* DDR size 256MB */
-#define DDR_8BANKS				/* 8-bank DDR2 (256MB) */
-/*====================*/
-/* Serial Driver info */
-/*====================*/
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE	4		/* NS16550 register size */
-#define CFG_NS16550_COM1	0x01c20000	/* Base address of UART0 */
-#define CFG_NS16550_COM2	0x01c20800	/* Base address of UART2 */
-#define CFG_NS16550_CLK		27000000	/* Input clock to NS16550 */
-#define CONFIG_CONS_INDEX	1		/* use UART0 for console */
-#define CONFIG_BAUDRATE		115200		/* Default baud rate */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-/*===================*/
-/* I2C Configuration */
-/*===================*/
-#define CONFIG_HARD_I2C
-#define CONFIG_DRIVER_DAVINCI_I2C
-#define CFG_I2C_SPEED		50000	/* 100Kbps won't work, silicon bug */
-#define CFG_I2C_SLAVE		10	/* Bogus, master-only in U-Boot */
-/*==================================*/
-/* Network & Ethernet Configuration */
-/*==================================*/
-#define CONFIG_DRIVER_TI_EMAC
-#define CONFIG_MII
-#define CONFIG_BOOTP_DEFAULT
-#define CONFIG_BOOTP_DNS
-#define CONFIG_BOOTP_DNS2
-#define CONFIG_BOOTP_SEND_HOSTNAME
-#define CONFIG_NET_RETRY_COUNT	10
-/*=====================*/
-/* Flash & Environment */
-/*=====================*/
-#define CFG_USE_NAND
-#define CFG_NAND_BASE		0x04000000
-#undef CFG_NAND_HW_ECC
-#define CFG_MAX_NAND_DEVICE	1		/* Max number of NAND devices */
-#define NAND_MAX_CHIPS		1
-#define DEF_BOOTM		""
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_FLASH_CFI_DRIVER
-#define CFG_FLASH_CFI
-#define CFG_MAX_FLASH_BANKS	1		/* max number of flash banks */
-#define CFG_ENV_ADDR		(PHYS_FLASH_1 + 0x40000)
-#define CFG_ENV_OFFSET		(CFG_ENV_ADDR)
-#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster)*/
-#define PHYS_FLASH_1		0x02000000	/* CS2 Base address */
-#define CFG_FLASH_BASE		PHYS_FLASH_1	/* Flash Base for U-Boot */
-#define PHYS_FLASH_SIZE		0x2000000	/* Flash size 32MB */
-#define CFG_MAX_FLASH_SECT	(PHYS_FLASH_SIZE/CFG_FLASH_SECT_SZ)
-#define CFG_ENV_SECT_SIZE	CFG_FLASH_SECT_SZ	/* Env sector Size */
-#define CFG_FLASH_SECT_SZ	0x20000	/* 128KB sect size INTEL Flash */
-#define CFG_FLASH_PROTECTION	1
-/*==============================*/
-/* U-Boot general configuration */
-/*==============================*/
-#undef CONFIG_USE_IRQ				/* No IRQ/FIQ in U-Boot */
-#define CONFIG_MISC_INIT_R
-#define CONFIG_BOOTFILE		"uImage"	/* Boot file name */
-#define CFG_PROMPT		"U-Boot > "	/* Monitor Command Prompt */
-#define CFG_CBSIZE		1024		/* Console I/O Buffer Size  */
-#define CFG_PBSIZE	(CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print buffer sz */
-#define CFG_MAXARGS	16		/* max number of command args */
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
-#define CFG_LOAD_ADDR	0x80700000 /* default Linux kernel load address */
-#define CONFIG_VERSION_VARIABLE
-#define CONFIG_AUTO_COMPLETE	/* Won't work with hush so far, may be later */
-#define CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2	"> "
-#define CONFIG_CMDLINE_EDITING
-#define CFG_LONGHELP
-#define CONFIG_CRC32_VERIFY
-#define CONFIG_MX_CYCLIC
-#define CONFIG_ENV_OVERWRITE
-/*===================*/
-/* Linux Information */
-/*===================*/
-#define LINUX_BOOT_PARAM_ADDR	0x80000100
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_BOOTDELAY	2
-#define CONFIG_BOOTARGS	\
-	"mem=120M console=ttyS0,115200n8 root=/dev/hda1 rw noinitrd ip=dhcp"
-#define CONFIG_BOOTCOMMAND	"run nand"
-#define CONFIG_EXTRA_ENV_SETTINGS "ethaddr=00:11:22:33:44:55\n"
-/*=================*/
-/* U-Boot commands */
-/*=================*/
-#include <config_cmd_default.h>
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SAVES
-#define CONFIG_CMD_EEPROM
-#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_SETGETDCR
-#define CONFIG_CMD_FLASH
-#undef CONFIG_CMD_IMLS
-#define CONFIG_CMD_NAND
-/*=======================*/
-/* KGDB support (if any) */
-/*=======================*/
-#ifdef CONFIG_CMD_KGDB
-#define CONFIG_KGDB_BAUDRATE	115200	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	1	/* which serial port to use */
-#endif
-#endif /* __CONFIG_H */