diff options
author | Stefan Roese <sr@denx.de> | 2007-05-18 11:20:02 +0200 |
---|---|---|
committer | Stefan Roese <sr@denx.de> | 2007-05-18 11:20:02 +0200 |
commit | ee96088ca59d871ec096aefce04b741d1b02cb30 (patch) | |
tree | 6a97720507c4bbd57ec5f6a8faf09e0971e5449d /include/configs | |
parent | ada4697d0230d6da552867777f98a67ec3ba2579 (diff) | |
parent | 70124c2602ae2d4c5d3dba05b482d91548242de8 (diff) | |
download | u-boot-imx-ee96088ca59d871ec096aefce04b741d1b02cb30.zip u-boot-imx-ee96088ca59d871ec096aefce04b741d1b02cb30.tar.gz u-boot-imx-ee96088ca59d871ec096aefce04b741d1b02cb30.tar.bz2 |
Merge with git://www.denx.de/git/u-boot.git
Diffstat (limited to 'include/configs')
-rw-r--r-- | include/configs/MPC8313ERDB.h | 561 | ||||
-rw-r--r-- | include/configs/MPC8349ITX.h | 3 | ||||
-rw-r--r-- | include/configs/SBC8560.h | 410 | ||||
-rw-r--r-- | include/configs/ml401.h | 61 | ||||
-rw-r--r-- | include/configs/motionpro.h | 116 | ||||
-rw-r--r-- | include/configs/xupv2p.h | 14 |
6 files changed, 719 insertions, 446 deletions
diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h new file mode 100644 index 0000000..6976313 --- /dev/null +++ b/include/configs/MPC8313ERDB.h @@ -0,0 +1,561 @@ +/* + * Copyright (C) Freescale Semiconductor, Inc. 2006. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +/* + * mpc8313epb board configuration file + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ +#define CONFIG_E300 1 +#define CONFIG_MPC83XX 1 +#define CONFIG_MPC831X 1 +#define CONFIG_MPC8313 1 +#define CONFIG_MPC8313ERDB 1 + +#define CONFIG_PCI +#define CONFIG_83XX_GENERIC_PCI + +#ifdef CFG_66MHZ +#define CONFIG_83XX_CLKIN 66666667 /* in Hz */ +#elif defined(CFG_33MHZ) +#define CONFIG_83XX_CLKIN 33333333 /* in Hz */ +#else +#error Unknown oscillator frequency. +#endif + +#define CONFIG_SYS_CLK_FREQ CONFIG_83XX_CLKIN + +#define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */ + +#define CFG_IMMR 0xE0000000 + +#define CFG_MEMTEST_START 0x00001000 +#define CFG_MEMTEST_END 0x07f00000 + +/* Early revs of this board will lock up hard when attempting + * to access the PMC registers, unless a JTAG debugger is + * connected, or some resistor modifications are made. + */ +#define CFG_8313ERDB_BROKEN_PMC 1 + +#define CFG_ACR_PIPE_DEP 3 /* Arbiter pipeline depth (0-3) */ +#define CFG_ACR_RPTCNT 3 /* Arbiter repeat count (0-7) */ + +/* + * DDR Setup + */ +#define CFG_DDR_BASE 0x00000000 /* DDR is system memory*/ +#define CFG_SDRAM_BASE CFG_DDR_BASE +#define CFG_DDR_SDRAM_BASE CFG_DDR_BASE + +/* + * Manually set up DDR parameters, as this board does not + * seem to have the SPD connected to I2C. + */ +#define CFG_DDR_SIZE 128 /* MB */ +#define CFG_DDR_CONFIG ( CSCONFIG_EN | CSCONFIG_AP \ + | 0x00040000 /* TODO */ \ + | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10 ) + /* 0x80840102 */ + +#define CFG_DDR_TIMING_3 0x00000000 +#define CFG_DDR_TIMING_0 ( ( 0 << TIMING_CFG0_RWT_SHIFT ) \ + | ( 0 << TIMING_CFG0_WRT_SHIFT ) \ + | ( 0 << TIMING_CFG0_RRT_SHIFT ) \ + | ( 0 << TIMING_CFG0_WWT_SHIFT ) \ + | ( 2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT ) \ + | ( 2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT ) \ + | ( 8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT ) \ + | ( 2 << TIMING_CFG0_MRS_CYC_SHIFT ) ) + /* 0x00220802 */ +#define CFG_DDR_TIMING_1 ( ( 3 << TIMING_CFG1_PRETOACT_SHIFT ) \ + | ( 9 << TIMING_CFG1_ACTTOPRE_SHIFT ) \ + | ( 3 << TIMING_CFG1_ACTTORW_SHIFT ) \ + | ( 5 << TIMING_CFG1_CASLAT_SHIFT ) \ + | (13 << TIMING_CFG1_REFREC_SHIFT ) \ + | ( 3 << TIMING_CFG1_WRREC_SHIFT ) \ + | ( 2 << TIMING_CFG1_ACTTOACT_SHIFT ) \ + | ( 2 << TIMING_CFG1_WRTORD_SHIFT ) ) + /* 0x3935d322 */ +#define CFG_DDR_TIMING_2 ( ( 0 << TIMING_CFG2_ADD_LAT_SHIFT ) \ + | (31 << TIMING_CFG2_CPO_SHIFT ) \ + | ( 2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT ) \ + | ( 2 << TIMING_CFG2_RD_TO_PRE_SHIFT ) \ + | ( 2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT ) \ + | ( 3 << TIMING_CFG2_CKE_PLS_SHIFT ) \ + | (10 << TIMING_CFG2_FOUR_ACT_SHIFT) ) + /* 0x0f9048ca */ /* P9-45,may need tuning */ +#define CFG_DDR_INTERVAL ( ( 800 << SDRAM_INTERVAL_REFINT_SHIFT ) \ + | ( 100 << SDRAM_INTERVAL_BSTOPRE_SHIFT ) ) + /* 0x03200064 */ +#if defined(CONFIG_DDR_2T_TIMING) +#define CFG_SDRAM_CFG ( SDRAM_CFG_SREN \ + | 3 << SDRAM_CFG_SDRAM_TYPE_SHIFT \ + | SDRAM_CFG_2T_EN \ + | SDRAM_CFG_DBW_32 ) +#else +#define CFG_SDRAM_CFG ( SDRAM_CFG_SREN \ + | 3 << SDRAM_CFG_SDRAM_TYPE_SHIFT \ + | SDRAM_CFG_32_BE ) + /* 0x43080000 */ +#endif +#define CFG_SDRAM_CFG2 0x00401000; +/* set burst length to 8 for 32-bit data path */ +#define CFG_DDR_MODE ( ( 0x4440 << SDRAM_MODE_ESD_SHIFT ) \ + | ( 0x0232 << SDRAM_MODE_SD_SHIFT ) ) + /* 0x44400232 */ +#define CFG_DDR_MODE_2 0x8000C000; + +#define CFG_DDR_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05 + /*0x02000000*/ +#define CFG_DDRCDR_VALUE ( DDRCDR_EN \ + | DDRCDR_PZ_NOMZ \ + | DDRCDR_NZ_NOMZ \ + | DDRCDR_M_ODR ) + +/* + * FLASH on the Local Bus + */ +#define CFG_FLASH_CFI /* use the Common Flash Interface */ +#define CFG_FLASH_CFI_DRIVER /* use the CFI driver */ +#define CFG_FLASH_BASE 0xFE000000 /* start of FLASH */ +#define CFG_FLASH_SIZE 8 /* flash size in MB */ +#define CFG_FLASH_EMPTY_INFO /* display empty sectors */ +#define CFG_FLASH_USE_BUFFER_WRITE /* buffer up multiple bytes */ + +#define CFG_BR0_PRELIM (CFG_FLASH_BASE | /* flash Base address */ \ + (2 << BR_PS_SHIFT) | /* 16 bit port size */ \ + BR_V) /* valid */ +#define CFG_OR0_PRELIM ( 0xFF000000 /* 16 MByte */ \ + | OR_GPCM_XACS \ + | OR_GPCM_SCY_9 \ + | OR_GPCM_EHTR \ + | OR_GPCM_EAD ) + /* 0xFF006FF7 TODO SLOW 16 MB flash size */ +#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE /* window base at flash base */ +#define CFG_LBLAWAR0_PRELIM 0x80000017 /* 16 MB window size */ + +#define CFG_MAX_FLASH_BANKS 1 /* number of banks */ +#define CFG_MAX_FLASH_SECT 135 /* sectors per device */ + +#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ + +#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ + +#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) +#define CFG_RAMBOOT +#endif + +#define CFG_INIT_RAM_LOCK 1 +#define CFG_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */ +#define CFG_INIT_RAM_END 0x1000 /* End of used area in RAM*/ + +#define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ +#define CFG_MALLOC_LEN (512 * 1024) /* Reserved for malloc */ + +/* + * Local Bus LCRR and LBCR regs + */ +#define CFG_LCRR LCRR_EADC_1 | LCRR_CLKDIV_2 /* 0x00010002 */ +#define CFG_LBC_LBCR ( 0x00040000 /* TODO */ \ + | (0xFF << LBCR_BMT_SHIFT) \ + | 0xF ) /* 0x0004ff0f */ + +#define CFG_LBC_MRTPR 0x20000000 /*TODO */ /* LB refresh timer prescal, 266MHz/32 */ + +/* drivers/nand/nand.c */ +#define CFG_NAND_BASE 0xE2800000 /* 0xF0000000 */ +#define CFG_MAX_NAND_DEVICE 1 +#define NAND_MAX_CHIPS 1 +#define CONFIG_MTD_NAND_VERIFY_WRITE + +#define CFG_BR1_PRELIM ( CFG_NAND_BASE \ + | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ + | BR_PS_8 /* Port Size = 8 bit */ \ + | BR_MS_FCM /* MSEL = FCM */ \ + | BR_V ) /* valid */ +#define CFG_OR1_PRELIM ( 0xFFFF8000 /* length 32K */ \ + | OR_FCM_CSCT \ + | OR_FCM_CST \ + | OR_FCM_CHT \ + | OR_FCM_SCY_1 \ + | OR_FCM_TRLX \ + | OR_FCM_EHTR ) + /* 0xFFFF8396 */ +#define CFG_LBLAWBAR1_PRELIM CFG_NAND_BASE +#define CFG_LBLAWAR1_PRELIM 0x8000000E /* 32KB */ + +#define CFG_VSC7385_BASE 0xF0000000 + +#define CONFIG_VSC7385_ENET /* VSC7385 ethernet support */ +#define CFG_BR2_PRELIM 0xf0000801 /* VSC7385 Base address */ +#define CFG_OR2_PRELIM 0xfffe09ff /* VSC7385, 128K bytes*/ +#define CFG_LBLAWBAR2_PRELIM CFG_VSC7385_BASE/* Access window base at VSC7385 base */ +#define CFG_LBLAWAR2_PRELIM 0x80000010 /* Access window size 128K */ + +/* local bus read write buffer mapping */ +#define CFG_BR3_PRELIM 0xFA000801 /* map at 0xFA000000 */ +#define CFG_OR3_PRELIM 0xFFFF8FF7 /* 32kB */ +#define CFG_LBLAWBAR3_PRELIM 0xFA000000 +#define CFG_LBLAWAR3_PRELIM 0x8000000E /* 32KB */ + +/* pass open firmware flat tree */ +#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_BOARD_SETUP 1 + +/* maximum size of the flat tree (8K) */ +#define OF_FLAT_TREE_MAX_SIZE 8192 + +#define OF_CPU "PowerPC,8313@0" +#define OF_SOC "soc8313@e0000000" +#define OF_TBCLK (bd->bi_busfreq / 4) +#define OF_STDOUT_PATH "/soc8313@e0000000/serial@4500" + +/* + * Serial Port + */ +#define CONFIG_CONS_INDEX 1 +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE 1 +#define CFG_NS16550_CLK get_bus_freq(0) + +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} + +#define CFG_NS16550_COM1 (CFG_IMMR+0x4500) +#define CFG_NS16550_COM2 (CFG_IMMR+0x4600) + +/* Use the HUSH parser */ +#define CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " + +/* I2C */ +#define CONFIG_HARD_I2C /* I2C with hardware support*/ +#define CONFIG_FSL_I2C +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_I2C_CMD_TREE +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F +#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ +#define CFG_I2C_OFFSET 0x3000 +#define CFG_I2C2_OFFSET 0x3100 + +/* TSEC */ +#define CFG_TSEC1_OFFSET 0x24000 +#define CFG_TSEC1 (CFG_IMMR+CFG_TSEC1_OFFSET) +#define CFG_TSEC2_OFFSET 0x25000 +#define CFG_TSEC2 (CFG_IMMR+CFG_TSEC2_OFFSET) +#define CONFIG_NET_MULTI + +/* + * General PCI + * Addresses are mapped 1-1. + */ +#define CFG_PCI1_MEM_BASE 0x80000000 +#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE +#define CFG_PCI1_MEM_SIZE 0x10000000 /* 256M */ +#define CFG_PCI1_MMIO_BASE 0x90000000 +#define CFG_PCI1_MMIO_PHYS CFG_PCI1_MMIO_BASE +#define CFG_PCI1_MMIO_SIZE 0x10000000 /* 256M */ +#define CFG_PCI1_IO_BASE 0x00000000 +#define CFG_PCI1_IO_PHYS 0xE2000000 +#define CFG_PCI1_IO_SIZE 0x00100000 /* 1M */ + +#define CONFIG_PCI_PNP /* do pci plug-and-play */ +#define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */ + +/* + * TSEC configuration + */ +#define CONFIG_TSEC_ENET /* TSEC ethernet support */ + +#ifndef CONFIG_NET_MULTI +#define CONFIG_NET_MULTI 1 +#endif + +#define CONFIG_GMII 1 /* MII PHY management */ +#define CONFIG_MPC83XX_TSEC1 1 + +#define CONFIG_MPC83XX_TSEC1_NAME "TSEC0" +#define CONFIG_MPC83XX_TSEC2 1 +#define CONFIG_MPC83XX_TSEC2_NAME "TSEC1" +#define TSEC1_PHY_ADDR 0x1c +#define TSEC2_PHY_ADDR 4 +#define TSEC1_PHYIDX 0 +#define TSEC2_PHYIDX 0 + +/* Options are: TSEC[0-1] */ +#define CONFIG_ETHPRIME "TSEC1" + +/* + * Configure on-board RTC + */ +#define CONFIG_RTC_DS1337 +#define CFG_I2C_RTC_ADDR 0x68 + +/* + * Environment + */ +#ifndef CFG_RAMBOOT + #define CFG_ENV_IS_IN_FLASH 1 + #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000) + #define CFG_ENV_SECT_SIZE 0x10000 /* 64K(one sector) for env */ + #define CFG_ENV_SIZE 0x2000 + +/* Address and size of Redundant Environment Sector */ +#else + #define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ + #define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000) + #define CFG_ENV_SIZE 0x2000 +#endif + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +#define CFG_BASE_COMMANDS ( CONFIG_CMD_DFL \ + | CFG_CMD_PING \ + | CFG_CMD_DHCP \ + | CFG_CMD_I2C \ + | CFG_CMD_MII \ + | CFG_CMD_DATE \ + | CFG_CMD_PCI) + +#define CONFIG_CMDLINE_EDITING 1 + +#define CFG_RAMBOOT_COMMANDS (CFG_BASE_COMMANDS & \ + ~(CFG_CMD_ENV | CFG_CMD_LOADS)) + +#if defined(CFG_RAMBOOT) +#define CONFIG_COMMANDS CFG_RAMBOOT_COMMANDS +#else +#define CONFIG_COMMANDS CFG_BASE_COMMANDS +#endif + +#include <cmd_confdefs.h> + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_LOAD_ADDR 0x2000000 /* default load address */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ + +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/ + +/* Cache Configuration */ +#define CFG_DCACHE_SIZE 16384 +#define CFG_CACHELINE_SIZE 32 +#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/ + +#define CFG_RCWH_PCIHOST 0x80000000 /* PCIHOST */ + +#ifdef CFG_66MHZ + +/* 66MHz IN, 133MHz CSB, 266 DDR, 266 CORE */ +/* 0x62040000 */ +#define CFG_HRCW_LOW (\ + 0x20000000 /* reserved, must be set */ |\ + HRCWL_DDRCM |\ + HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ + HRCWL_DDR_TO_SCB_CLK_2X1 |\ + HRCWL_CSB_TO_CLKIN_2X1 |\ + HRCWL_CORE_TO_CSB_2X1) + +#elif defined(CFG_33MHZ) + +/* 33MHz IN, 165MHz CSB, 330 DDR, 330 CORE */ +/* 0x65040000 */ +#define CFG_HRCW_LOW (\ + 0x20000000 /* reserved, must be set */ |\ + HRCWL_DDRCM |\ + HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ + HRCWL_DDR_TO_SCB_CLK_2X1 |\ + HRCWL_CSB_TO_CLKIN_5X1 |\ + HRCWL_CORE_TO_CSB_2X1) + +#endif + +/* 0xa0606c00 */ +#define CFG_HRCW_HIGH (\ + HRCWH_PCI_HOST |\ + HRCWH_PCI1_ARBITER_ENABLE |\ + HRCWH_CORE_ENABLE |\ + HRCWH_FROM_0X00000100 |\ + HRCWH_BOOTSEQ_DISABLE |\ + HRCWH_SW_WATCHDOG_DISABLE |\ + HRCWH_ROM_LOC_LOCAL_16BIT |\ + HRCWH_RL_EXT_LEGACY |\ + HRCWH_TSEC1M_IN_RGMII |\ + HRCWH_TSEC2M_IN_RGMII |\ + HRCWH_BIG_ENDIAN |\ + HRCWH_LALE_NORMAL) + +/* System IO Config */ +#define CFG_SICRH (SICRH_TSOBI1 | SICRH_TSOBI2) /* RGMII */ +#define CFG_SICRL SICRL_USBDR /* Enable Internal USB Phy */ + +#define CFG_HID0_INIT 0x000000000 +#define CFG_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \ + HID0_ENABLE_DYNAMIC_POWER_MANAGMENT) + +#define CFG_HID2 HID2_HBE + +/* DDR @ 0x00000000 */ +#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10) +#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) + +/* PCI @ 0x80000000 */ +#define CFG_IBAT1L (CFG_PCI1_MEM_BASE | BATL_PP_10) +#define CFG_IBAT1U (CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_IBAT2L (CFG_PCI1_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT2U (CFG_PCI1_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP) + +/* PCI2 not supported on 8313 */ +#define CFG_IBAT3L (0) +#define CFG_IBAT3U (0) +#define CFG_IBAT4L (0) +#define CFG_IBAT4U (0) + +/* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */ +#define CFG_IBAT5L (CFG_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT5U (CFG_IMMR | BATU_BL_256M | BATU_VS | BATU_VP) + +/* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */ +#define CFG_IBAT6L (0xF0000000 | BATL_PP_10) +#define CFG_IBAT6U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) + +#define CFG_IBAT7L (0) +#define CFG_IBAT7U (0) + +#define CFG_DBAT0L CFG_IBAT0L +#define CFG_DBAT0U CFG_IBAT0U +#define CFG_DBAT1L CFG_IBAT1L +#define CFG_DBAT1U CFG_IBAT1U +#define CFG_DBAT2L CFG_IBAT2L +#define CFG_DBAT2U CFG_IBAT2U +#define CFG_DBAT3L CFG_IBAT3L +#define CFG_DBAT3U CFG_IBAT3U +#define CFG_DBAT4L CFG_IBAT4L +#define CFG_DBAT4U CFG_IBAT4U +#define CFG_DBAT5L CFG_IBAT5L +#define CFG_DBAT5U CFG_IBAT5U +#define CFG_DBAT6L CFG_IBAT6L +#define CFG_DBAT6U CFG_IBAT6U +#define CFG_DBAT7L CFG_IBAT7L +#define CFG_DBAT7U CFG_IBAT7U + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +/* + * Environment Configuration + */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_ETHADDR 00:E0:0C:00:95:01 +#define CONFIG_HAS_ETH1 +#define CONFIG_ETH1ADDR 00:E0:0C:00:95:02 + +#define CONFIG_IPADDR 10.0.0.2 +#define CONFIG_SERVERIP 10.0.0.1 +#define CONFIG_GATEWAYIP 10.0.0.1 +#define CONFIG_NETMASK 255.0.0.0 +#define CONFIG_NETDEV eth1 + +#define CONFIG_HOSTNAME mpc8313erdb +#define CONFIG_ROOTPATH /nfs/root/path +#define CONFIG_BOOTFILE uImage +#define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ +#define CONFIG_FDTFILE mpc8313erdb.dtb + +#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */ +#define CONFIG_BOOTDELAY -1 /* -1 disables auto-boot */ +#define CONFIG_BAUDRATE 115200 + +#define XMK_STR(x) #x +#define MK_STR(x) XMK_STR(x) + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=" MK_STR(CONFIG_NETDEV) "\0" \ + "ethprime=TSEC1\0" \ + "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ + "tftpflash=tftpboot $loadaddr $uboot; " \ + "protect off " MK_STR(TEXT_BASE) " +$filesize; " \ + "erase " MK_STR(TEXT_BASE) " +$filesize; " \ + "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \ + "protect on " MK_STR(TEXT_BASE) " +$filesize; " \ + "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \ + "fdtaddr=400000\0" \ + "fdtfile=" MK_STR(CONFIG_FDTFILE) "\0" \ + "console=ttyS0\0" \ + "setbootargs=setenv bootargs " \ + "root=$rootdev rw console=$console,$baudrate $othbootargs\0" \ + "setipargs=setenv bootargs nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "root=$rootdev rw console=$console,$baudrate $othbootargs\0" + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv rootdev /dev/nfs;" \ + "run setbootargs;" \ + "run setipargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv rootdev /dev/ram;" \ + "run setbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + +#undef MK_STR +#undef XMK_STR + +#endif /* __CONFIG_H */ diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index 37bbfb3..906339e 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -154,6 +154,9 @@ #define CFG_MEMTEST_START 0x1000 /* memtest region */ #define CFG_MEMTEST_END 0x2000 +#define CFG_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN | \ + DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05) + #ifdef CONFIG_HARD_I2C #define CONFIG_SPD_EEPROM /* use SPD EEPROM for DDR setup*/ #endif diff --git a/include/configs/SBC8560.h b/include/configs/SBC8560.h deleted file mode 100644 index 8b46a17..0000000 --- a/include/configs/SBC8560.h +++ /dev/null @@ -1,410 +0,0 @@ -/* - * (C) Copyright 2002,2003 Motorola,Inc. - * Xianghua Xiao <X.Xiao@motorola.com> - * - * (C) Copyright 2004 Wind River Systems Inc <www.windriver.com>. - * Added support for Wind River SBC8560 board - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* mpc8560ads board configuration file */ -/* please refer to doc/README.mpc85xx for more info */ -/* make sure you change the MAC address and other network params first, - * search for CONFIG_ETHADDR,CONFIG_SERVERIP,etc in this file - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#if XXX -#define DEBUG /* General debug */ -#define ET_DEBUG -#endif -#define TSEC_DEBUG - -/* High Level Configuration Options */ -#define CONFIG_BOOKE 1 /* BOOKE */ -#define CONFIG_E500 1 /* BOOKE e500 family */ -#define CONFIG_MPC85xx 1 /* MPC8540/MPC8560 */ -#define CONFIG_MPC85xx_REV1 1 /* MPC85xx Rev 1.0 chip */ - - -#define CONFIG_CPM2 1 /* has CPM2 */ -#define CONFIG_SBC8560 1 /* configuration for SBC8560 board */ - -#define CONFIG_MPC8560ADS 1 /* MPC8560ADS board specific (supplement) */ - -#define CONFIG_TSEC_ENET /* tsec ethernet support */ -#undef CONFIG_PCI /* pci ethernet support */ -#undef CONFIG_ETHER_ON_FCC /* cpm FCC ethernet support */ - - -#define CONFIG_ENV_OVERWRITE - -/* Using Localbus SDRAM to emulate flash before we can program the flash, - * normally you need a flash-boot image(u-boot.bin), if so undef this. - */ -#undef CONFIG_RAM_AS_FLASH - -#if defined(CONFIG_PCI_66) /* some PCI card is 33Mhz only */ - #define CONFIG_SYS_CLK_FREQ 66000000/* sysclk for MPC85xx */ -#else - #define CONFIG_SYS_CLK_FREQ 33000000/* most pci cards are 33Mhz */ -#endif - -/* below can be toggled for performance analysis. otherwise use default */ -#define CONFIG_L2_CACHE /* toggle L2 cache */ -#undef CONFIG_BTB /* toggle branch predition */ -#undef CONFIG_ADDR_STREAMING /* toggle addr streaming */ - -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ - -#undef CFG_DRAM_TEST /* memory test, takes time */ -#define CFG_MEMTEST_START 0x00200000 /* memtest region */ -#define CFG_MEMTEST_END 0x00400000 - -#if (defined(CONFIG_PCI) && defined(CONFIG_TSEC_ENET) || \ - defined(CONFIG_PCI) && defined(CONFIG_ETHER_ON_FCC) || \ - defined(CONFIG_TSEC_ENET) && defined(CONFIG_ETHER_ON_FCC)) -#error "You can only use ONE of PCI Ethernet Card or TSEC Ethernet or CPM FCC." -#endif - -/* - * Base addresses -- Note these are effective addresses where the - * actual resources get mapped (not physical addresses) - */ -#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ - -#if XXX - #define CFG_CCSRBAR 0xfdf00000 /* relocated CCSRBAR */ -#else - #define CFG_CCSRBAR 0xff700000 /* default CCSRBAR */ -#endif -#define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */ - -#define CFG_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory */ -#define CFG_SDRAM_BASE CFG_DDR_SDRAM_BASE -#define CFG_SDRAM_SIZE 512 /* DDR is 512MB */ -#define SPD_EEPROM_ADDRESS 0x55 /* DDR DIMM */ - -#undef CONFIG_DDR_ECC /* only for ECC DDR module */ -#undef CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ - -#if defined(CONFIG_MPC85xx_REV1) - #define CONFIG_DDR_DLL /* possible DLL fix needed */ -#endif - -#undef CONFIG_CLOCKS_IN_MHZ - -#if defined(CONFIG_RAM_AS_FLASH) - #define CFG_LBC_SDRAM_BASE 0xfc000000 /* Localbus SDRAM */ - #define CFG_FLASH_BASE 0xf8000000 /* start of FLASH 8M */ - #define CFG_BR0_PRELIM 0xf8000801 /* port size 8bit */ - #define CFG_OR0_PRELIM 0xf8000ff7 /* 8MB Flash */ -#else /* Boot from real Flash */ - #define CFG_LBC_SDRAM_BASE 0xf8000000 /* Localbus SDRAM */ - #define CFG_FLASH_BASE 0xff800000 /* start of FLASH 8M */ - #define CFG_BR0_PRELIM 0xff800801 /* port size 8bit */ - #define CFG_OR0_PRELIM 0xff800ff7 /* 8MB Flash */ -#endif -#define CFG_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */ - -/* local bus definitions */ -#define CFG_BR1_PRELIM 0xe4001801 /* 64M, 32-bit flash */ -#define CFG_OR1_PRELIM 0xfc000ff7 - -#define CFG_BR2_PRELIM 0x00000000 /* CS2 not used */ -#define CFG_OR2_PRELIM 0x00000000 - -#define CFG_BR3_PRELIM 0xf0001861 /* 64MB localbus SDRAM */ -#define CFG_OR3_PRELIM 0xfc000cc1 - -#if defined(CONFIG_RAM_AS_FLASH) - #define CFG_BR4_PRELIM 0xf4001861 /* 64M localbus SDRAM */ -#else - #define CFG_BR4_PRELIM 0xf8001861 /* 64M localbus SDRAM */ -#endif -#define CFG_OR4_PRELIM 0xfc000cc1 - -#define CFG_BR5_PRELIM 0xfc000801 /* 16M CS5 misc devices */ -#if 1 - #define CFG_OR5_PRELIM 0xff000ff7 -#else - #define CFG_OR5_PRELIM 0xff0000f0 -#endif - -#define CFG_BR6_PRELIM 0xe0001801 /* 64M, 32-bit flash */ -#define CFG_OR6_PRELIM 0xfc000ff7 -#define CFG_LBC_LCRR 0x00030002 /* local bus freq */ -#define CFG_LBC_LBCR 0x00000000 -#define CFG_LBC_LSRT 0x20000000 -#define CFG_LBC_MRTPR 0x20000000 -#define CFG_LBC_LSDMR_1 0x2861b723 -#define CFG_LBC_LSDMR_2 0x0861b723 -#define CFG_LBC_LSDMR_3 0x0861b723 -#define CFG_LBC_LSDMR_4 0x1861b723 -#define CFG_LBC_LSDMR_5 0x4061b723 - -/* just hijack the MOT BCSR def for SBC8560 misc devices */ -#define CFG_BCSR ((CFG_BR5_PRELIM & 0xff000000)|0x00400000) -/* the size of CS5 needs to be >= 16M for TLB and LAW setups */ - -#define CONFIG_L1_INIT_RAM -#define CFG_INIT_RAM_LOCK 1 -#define CFG_INIT_RAM_ADDR 0x70000000 /* Initial RAM address */ -#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */ - -#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) -#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET - -#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ -#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ - -/* Serial Port */ -#undef CONFIG_CONS_ON_SCC /* define if console on SCC */ -#undef CONFIG_CONS_NONE /* define if console on something else */ - -#define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO -#define CFG_NS16550 -#define CFG_NS16550_SERIAL -#define CFG_NS16550_REG_SIZE 1 -#define CFG_NS16550_CLK 1843200 /* get_bus_freq(0) */ -#define CONFIG_BAUDRATE 9600 - -#define CFG_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} - -#define CFG_NS16550_COM1 ((CFG_BR5_PRELIM & 0xff000000)+0x00700000) -#define CFG_NS16550_COM2 ((CFG_BR5_PRELIM & 0xff000000)+0x00800000) - -/* Use the HUSH parser */ -#define CFG_HUSH_PARSER -#ifdef CFG_HUSH_PARSER -#define CFG_PROMPT_HUSH_PS2 "> " -#endif - -/* I2C */ -#define CONFIG_HARD_I2C /* I2C with hardware support*/ -#undef CONFIG_SOFT_I2C /* I2C bit-banged */ -#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CFG_I2C_SLAVE 0x7F -#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ - -#define CFG_PCI_MEM_BASE 0xC0000000 -#define CFG_PCI_MEM_PHYS 0xC0000000 -#define CFG_PCI_MEM_SIZE 0x10000000 - -#if defined(CONFIG_TSEC_ENET) /* TSEC Ethernet port */ - -# define CONFIG_NET_MULTI 1 -# define CONFIG_MII 1 /* MII PHY management */ -# define CONFIG_MPC85xx_TSEC1 -# define CONFIG_MPC85xx_TSEC1_NAME "TSEC0" -# define TSEC1_PHY_ADDR 25 -# define TSEC1_PHYIDX 0 -/* Options are: TSEC0 */ -# define CONFIG_ETHPRIME "TSEC0" - - -#elif defined(CONFIG_ETHER_ON_FCC) /* CPM FCC Ethernet */ - - #undef CONFIG_ETHER_NONE /* define if ether on something else */ - #define CONFIG_ETHER_ON_FCC2 /* cpm FCC ethernet support */ - #define CONFIG_ETHER_INDEX 2 /* which channel for ether */ - - #if (CONFIG_ETHER_INDEX == 2) - /* - * - Rx-CLK is CLK13 - * - Tx-CLK is CLK14 - * - Select bus for bd/buffers - * - Full duplex - */ - #define CFG_CMXFCR_MASK (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK) - #define CFG_CMXFCR_VALUE (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14) - #define CFG_CPMFCR_RAMTYPE 0 - #define CFG_FCC_PSMR (FCC_PSMR_FDE) - - #elif (CONFIG_ETHER_INDEX == 3) - /* need more definitions here for FE3 */ - #endif /* CONFIG_ETHER_INDEX */ - - #define CONFIG_MII /* MII PHY management */ - #define CONFIG_BITBANGMII /* bit-bang MII PHY management */ - /* - * GPIO pins used for bit-banged MII communications - */ - #define MDIO_PORT 2 /* Port C */ - #define MDIO_ACTIVE (iop->pdir |= 0x00400000) - #define MDIO_TRISTATE (iop->pdir &= ~0x00400000) - #define MDIO_READ ((iop->pdat & 0x00400000) != 0) - - #define MDIO(bit) if(bit) iop->pdat |= 0x00400000; \ - else iop->pdat &= ~0x00400000 - - #define MDC(bit) if(bit) iop->pdat |= 0x00200000; \ - else iop->pdat &= ~0x00200000 - - #define MIIDELAY udelay(1) - -#endif - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ - -#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */ -#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */ -#if 0 -#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ -#define CFG_FLASH_PROTECTION /* use hardware protection */ -#endif -#define CFG_MAX_FLASH_SECT 64 /* max number of sectors on one chip */ -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ - -#undef CFG_FLASH_CHECKSUM -#define CFG_FLASH_ERASE_TOUT 200000 /* Timeout for Flash Erase (in ms) */ -#define CFG_FLASH_WRITE_TOUT 50000 /* Timeout for Flash Write (in ms) */ - -#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ - -#if 0 -/* XXX This doesn't work and I don't want to fix it */ -#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) - #define CFG_RAMBOOT -#else - #undef CFG_RAMBOOT -#endif -#endif - -/* Environment */ -#if !defined(CFG_RAMBOOT) - #if defined(CONFIG_RAM_AS_FLASH) - #define CFG_ENV_IS_NOWHERE - #define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x100000) - #define CFG_ENV_SIZE 0x2000 - #else - #define CFG_ENV_IS_IN_FLASH 1 - #define CFG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */ - #define CFG_ENV_ADDR (CFG_MONITOR_BASE - CFG_ENV_SECT_SIZE) - #define CFG_ENV_SIZE 0x2000 /* CFG_ENV_SECT_SIZE */ - #endif -#else - #define CFG_NO_FLASH 1 /* Flash is not usable now */ - #define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ - #define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000) - #define CFG_ENV_SIZE 0x2000 -#endif - -#define CONFIG_BOOTARGS "root=/dev/nfs rw nfsroot=192.168.0.251:/tftpboot ip=192.168.0.105:192.168.0.251::255.255.255.0:sbc8560:eth0:off console=ttyS0,9600" -/*#define CONFIG_BOOTARGS "root=/dev/ram rw console=ttyS0,115200"*/ -#define CONFIG_BOOTCOMMAND "bootm 0xff800000 0xffa00000" -#define CONFIG_BOOTDELAY 5 /* -1 disable autoboot */ - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - -#if defined(CFG_RAMBOOT) || defined(CONFIG_RAM_AS_FLASH) - #if defined(CONFIG_PCI) - #define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PCI | \ - CFG_CMD_PING | CFG_CMD_I2C) & \ - ~(CFG_CMD_ENV | \ - CFG_CMD_LOADS )) - #elif (defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)) - #define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_MII | \ - CFG_CMD_PING | CFG_CMD_I2C) & \ - ~(CFG_CMD_ENV)) - #endif -#else - #if defined(CONFIG_PCI) - #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PCI | \ - CFG_CMD_PING | CFG_CMD_I2C) - #elif (defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)) - #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_MII | \ - CFG_CMD_PING | CFG_CMD_I2C) - #endif -#endif - -#include <cmd_confdefs.h> - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -/* - * Miscellaneous configurable options - */ -#define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "SBC8560=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) - #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ -#else - #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_LOAD_ADDR 0x1000000 /* default load address */ -#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/* Cache Configuration */ -#define CFG_DCACHE_SIZE 32768 -#define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) - #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/* - * Internal Definitions - * - * Boot Flags - */ -#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02 /* Software reboot */ - -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) - #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ - #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ -#endif - -/*Note: change below for your network setting!!! */ -#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC) -# define CONFIG_ETHADDR 00:vv:ww:xx:yy:8a -# define CONFIG_HAS_ETH1 -# define CONFIG_ETH1ADDR 00:vv:ww:xx:yy:8b -# define CONFIG_HAS_ETH2 -# define CONFIG_ETH2ADDR 00:vv:ww:xx:yy:8c -#endif - -#define CONFIG_SERVERIP YourServerIP -#define CONFIG_IPADDR YourTargetIP -#define CONFIG_GATEWAYIP YourGatewayIP -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_HOSTNAME SBC8560 -#define CONFIG_ROOTPATH YourRootPath -#define CONFIG_BOOTFILE YourImageName - -#endif /* __CONFIG_H */ diff --git a/include/configs/ml401.h b/include/configs/ml401.h index cb159e7..3db2877 100644 --- a/include/configs/ml401.h +++ b/include/configs/ml401.h @@ -28,6 +28,7 @@ #include "../board/xilinx/ml401/xparameters.h" #define CONFIG_MICROBLAZE 1 /* MicroBlaze CPU */ +#define MICROBLAZE_V5 1 #define CONFIG_ML401 1 /* ML401 Board */ /* uart */ @@ -36,11 +37,11 @@ #define CFG_BAUDRATE_TABLE { CONFIG_BAUDRATE } /* setting reset address */ -#define CFG_RESET_ADDRESS TEXT_BASE +/*#define CFG_RESET_ADDRESS TEXT_BASE*/ /* ethernet */ #define CONFIG_EMACLITE 1 -#define XPAR_EMAC_0_DEVICE_ID XPAR_XEMAC_NUM_INSTANCES +#define XPAR_EMAC_0_DEVICE_ID XPAR_OPB_ETHERNET_0_DEVICE_ID /* gpio */ #define CFG_GPIO_0 1 @@ -58,6 +59,10 @@ #define FREQUENCE XILINX_CLOCK_FREQ #define CFG_TIMER_0_PRELOAD ( FREQUENCE/1000 ) +/* FSL */ +#define CFG_FSL_2 +#define FSL_INTR_2 1 + /* * memory layout - Example * TEXT_BASE = 0x1200_0000; @@ -93,7 +98,8 @@ /* global pointer */ #define CFG_GBL_DATA_SIZE 0x1000 /* size of global data */ -#define CFG_GBL_DATA_OFFSET (CFG_SDRAM_BASE + CFG_SDRAM_SIZE - CFG_GBL_DATA_SIZE) /* start of global data */ +/* start of global data */ +#define CFG_GBL_DATA_OFFSET (CFG_SDRAM_BASE + CFG_SDRAM_SIZE - CFG_GBL_DATA_SIZE) /* monitor code */ #define SIZE 0x40000 @@ -117,6 +123,7 @@ #define CFG_FLASH_EMPTY_INFO 1 /* ?empty sector */ #define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ #define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ + #define CFG_FLASH_PROTECTION /* hardware flash protection */ #ifdef RAMENV #define CFG_ENV_IS_NOWHERE 1 @@ -135,6 +142,7 @@ #define CFG_ENV_IS_NOWHERE 1 #define CFG_ENV_SIZE 0x1000 #define CFG_ENV_ADDR (CFG_MONITOR_BASE - CFG_ENV_SIZE) + #define CFG_FLASH_PROTECTION /* hardware flash protection */ #endif /* !FLASH */ #ifdef FLASH @@ -152,8 +160,13 @@ CFG_CMD_IMI |\ CFG_CMD_NET |\ CFG_CMD_CACHE |\ + CFG_CMD_FAT |\ + CFG_CMD_EXT2 |\ + CFG_CMD_JFFS2 |\ + CFG_CMD_ECHO |\ CFG_CMD_IMLS |\ CFG_CMD_FLASH |\ + CFG_CMD_MFSL |\ CFG_CMD_PING \ ) #else /* !RAMENV */ @@ -174,6 +187,11 @@ CFG_CMD_FLASH |\ CFG_CMD_PING |\ CFG_CMD_ENV |\ + CFG_CMD_FAT |\ + CFG_CMD_EXT2 |\ + CFG_CMD_JFFS2 |\ + CFG_CMD_ECHO |\ + CFG_CMD_MFSL |\ CFG_CMD_SAVES \ ) @@ -189,16 +207,30 @@ CFG_CMD_BDI |\ CFG_CMD_RUN |\ CFG_CMD_LOADS |\ + CFG_CMD_FAT |\ + CFG_CMD_EXT2 |\ CFG_CMD_LOADB |\ CFG_CMD_IMI |\ CFG_CMD_NET |\ CFG_CMD_CACHE |\ + CFG_CMD_MFSL |\ CFG_CMD_PING \ ) #endif /* !FLASH */ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> +#if (CONFIG_COMMANDS & CFG_CMD_JFFS2) +/* JFFS2 partitions */ +#define CONFIG_JFFS2_CMDLINE /* mtdparts command line support */ +#define MTDIDS_DEFAULT "nor0=ml401-0" + +/* default mtd partition table */ +#define MTDPARTS_DEFAULT "mtdparts=ml401-0:256k(u-boot),"\ + "256k(env),3m(kernel),1m(romfs),"\ + "1m(cramfs),-(jffs2)" +#endif + /* Miscellaneous configurable options */ #define CFG_PROMPT "U-Boot-mONStR> " #define CFG_CBSIZE 512 /* size of console buffer */ @@ -207,7 +239,7 @@ #define CFG_LONGHELP #define CFG_LOAD_ADDR 0x12000000 /* default load address */ -#define CONFIG_BOOTDELAY 30 +#define CONFIG_BOOTDELAY 30 #define CONFIG_BOOTARGS "root=romfs" #define CONFIG_HOSTNAME "ml401" #define CONFIG_BOOTCOMMAND "base 0;tftp 11000000 image.img;bootm" @@ -221,10 +253,19 @@ #define CFG_HZ 1000 /* system ace */ -/*#define CONFIG_SYSTEMACE -#define DEBUG_SYSTEMACE -#define CFG_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR -#define CFG_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH -#define CONFIG_DOS_PARTITION -*/ +#define CONFIG_SYSTEMACE +/* #define DEBUG_SYSTEMACE */ +#define SYSTEMACE_CONFIG_FPGA +#define CFG_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR +#define CFG_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH +#define CONFIG_DOS_PARTITION + +#define CONFIG_PREBOOT "echo U-BOOT for ML401;setenv preboot;echo" + +#define CONFIG_EXTRA_ENV_SETTINGS "unlock=yes\0" /* hardware flash protection */\ + "nor0=ml401-0\0"\ + "mtdparts=mtdparts=ml401-0:"\ + "256k(u-boot),256k(env),3m(kernel),"\ + "1m(romfs),1m(cramfs),-(jffs2)\0" + #endif /* __CONFIG_H */ diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h index 5328e8d..e6e0eb1 100644 --- a/include/configs/motionpro.h +++ b/include/configs/motionpro.h @@ -26,12 +26,10 @@ #ifndef __CONFIG_H #define __CONFIG_H - /* * High Level Configuration Options */ - /* CPU and board */ #define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ #define CONFIG_MPC5200 1 /* More exactly a MPC5200 */ @@ -50,7 +48,13 @@ CFG_CMD_MII | \ CFG_CMD_BEDBUG | \ CFG_CMD_NET | \ - CFG_CMD_PING) + CFG_CMD_PING | \ + CFG_CMD_IDE | \ + CFG_CMD_FAT | \ + CFG_CMD_JFFS2 | \ + CFG_CMD_I2C | \ + CFG_CMD_DATE | \ + CFG_CMD_EEPROM) /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> @@ -94,42 +98,50 @@ * Default environment settings */ #define CONFIG_EXTRA_ENV_SETTINGS \ - "sdram_test=0\0" \ "netdev=eth0\0" \ "hostname=motionpro\0" \ "netmask=255.255.0.0\0" \ "ipaddr=192.168.160.22\0" \ "serverip=192.168.1.1\0" \ "gatewayip=192.168.1.1\0" \ - "kernel_addr=200000\0" \ + "console=ttyPSC0,115200\0" \ "u-boot_addr=100000\0" \ - "kernel_sector=20\0" \ - "kernel_size=1000\0" \ - "console=ttyS0,115200\0" \ + "kernel_addr=200000\0" \ + "fdt_addr=400000\0" \ + "ramdisk_addr=500000\0" \ + "multi_image_addr=800000\0" \ "rootpath=/opt/eldk-4.1/ppc_6xx\0" \ - "bootfile=/tftpboot/motionpro/uImage\0" \ "u-boot=/tftpboot/motionpro/u-boot.bin\0" \ + "bootfile=/tftpboot/motionpro/uImage\0" \ + "fdt_file=/tftpboot/motionpro/motionpro.dtb\0" \ + "ramdisk_file=/tftpboot/motionpro/uRamdisk\0" \ + "multi_image_file=kernel+initrd+dtb.img\0" \ "load=tftp $(u-boot_addr) $(u-boot)\0" \ "update=prot off fff00000 fff3ffff; era fff00000 fff3ffff; " \ "cp.b $(u-boot_addr) fff00000 $(filesize);" \ "prot on fff00000 fff3ffff\0" \ "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip=setenv bootargs $(bootargs) console=$(console) " \ - "ip=$(ipaddr):$(serverip):$(gatewayip):" \ - "$(netmask):$(hostname):$(netdev):off panic=1\0" \ - "flash_nfs=run nfsargs addip;bootm $(kernel_addr)\0" \ - "flash_self=run ramargs addip;bootm $(kernel_addr) " \ - "$(ramdisk_addr)\0" \ - "net_nfs=tftp $(kernel_addr) $(bootfile); run nfsargs addip; " \ - "bootm $(kernel_addr)\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ "nfsroot=$(serverip):$(rootpath)\0" \ - "fstype=ext3\0" \ - "fatargs=setenv bootargs init=/linuxrc rw\0" \ + "fat_args=setenv bootargs rw\0" \ + "addip=setenv bootargs $(bootargs) " \ + "ip=$(ipaddr):$(serverip):$(gatewayip):" \ + "$(netmask):$(hostname):$(netdev):off panic=1 " \ + "console=$(console)\0" \ + "net_nfs=tftp $(kernel_addr) $(bootfile); " \ + "tftp $(fdt_addr) $(fdt_file); run nfsargs addip; " \ + "bootm $(kernel_addr) - $(fdt_addr)\0" \ + "net_self=tftp $(kernel_addr) $(bootfile); " \ + "tftp $(fdt_addr) $(fdt_file); " \ + "tftp $(ramdisk_addr) $(ramdisk_file); " \ + "run ramargs addip; " \ + "bootm $(kernel_addr) $(ramdisk_addr) $(fdt_addr)\0" \ + "fat_multi=run fat_args addip; fatload ide 0:1 " \ + "${multi_image_addr} ${multi_image_file}; " \ + "bootm ${multi_image_addr}\0" \ "" #define CONFIG_BOOTCOMMAND "run net_nfs" - /* * do board-specific init */ @@ -148,6 +160,12 @@ /* + * Set IPB speed to 100MHz (yes, the #define is misnamed) + */ +#define CFG_IPBSPEED_133 + + +/* * Memory map */ /* @@ -243,6 +261,53 @@ #define CFG_MAX_FLASH_SECT 256 /* max num of sects on one chip */ #define CONFIG_FLASH_16BIT /* Flash is 16-bit */ +/* + * MTD configuration + */ +#define CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "nor0=motionpro-0" +#define MTDPARTS_DEFAULT "mtdparts=motionpro-0:" \ + "13m(fs),2m(kernel),256k(uboot)," \ + "64k(env),64k(dtb),-(user_data)" + +/* + * IDE/ATA configuration + */ +#define CFG_ATA_BASE_ADDR MPC5XXX_ATA +#define CFG_IDE_MAXBUS 1 +#define CFG_IDE_MAXDEVICE 1 +#define CONFIG_IDE_PREINIT + +#define CFG_ATA_DATA_OFFSET 0x0060 +#define CFG_ATA_REG_OFFSET CFG_ATA_DATA_OFFSET +#define CFG_ATA_STRIDE 4 +#define CONFIG_DOS_PARTITION + + +/* + * I2C configuration + */ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#define CFG_I2C_MODULE 2 /* select I2C module #2 */ +#define CFG_I2C_SPEED 100000 /* 100 kHz */ +#define CFG_I2C_SLAVE 0x7F + + +/* + * EEPROM configuration + */ +#define CFG_I2C_EEPROM_ADDR_LEN 1 +#define CFG_EEPROM_PAGE_WRITE_BITS 3 +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 70 +#define CFG_I2C_MULTI_EEPROMS 1 /* 2 EEPROMs (addr:50,52) */ + + +/* + * RTC configuration + */ +#define CONFIG_RTC_DS1337 1 +#define CFG_I2C_RTC_ADDR 0x68 + /* * Environment settings @@ -302,4 +367,15 @@ /* Not needed for MPC 5xxx U-Boot, but used by tools/updater */ #define CFG_RESET_ADDRESS 0xfff00100 +/* pass open firmware flat tree */ +#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_BOARD_SETUP 1 + +/* maximum size of the flat tree (8K) */ +#define OF_FLAT_TREE_MAX_SIZE 8192 +#define OF_CPU "PowerPC,5200@0" +#define OF_SOC "soc5200@f0000000" +#define OF_TBCLK (bd->bi_busfreq / 4) +#define OF_STDOUT_PAT "/soc5200@f0000000/serial@2000" + #endif /* __CONFIG_H */ diff --git a/include/configs/xupv2p.h b/include/configs/xupv2p.h index a2f4810..b4c720d 100644 --- a/include/configs/xupv2p.h +++ b/include/configs/xupv2p.h @@ -132,6 +132,8 @@ CFG_CMD_LOADS |\ CFG_CMD_LOADB |\ CFG_CMD_MISC |\ + CFG_CMD_FAT |\ + CFG_CMD_EXT2 |\ CFG_CMD_PING \ ) @@ -163,12 +165,12 @@ "base 0;" \ "echo" - /* system ace */ -/*#define CONFIG_SYSTEMACE -#define DEBUG_SYSTEMACE -#define CFG_SYSTEMACE_BASE 0xCF000000 -#define CFG_SYSTEMACE_WIDTH 16 -#define CONFIG_DOS_PARTITION*/ +#define CONFIG_SYSTEMACE +/* #define DEBUG_SYSTEMACE */ +#define SYSTEMACE_CONFIG_FPGA +#define CFG_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR +#define CFG_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH +#define CONFIG_DOS_PARTITION #endif /* __CONFIG_H */ |