Merge branch 'master' of git://git.denx.de/u-boot-arm

Fix a trivial conflict in arch/arm/dts/exynos5250.dtsi about gpio and
serial.

Conflicts:
	arch/arm/dts/exynos5250.dtsi

Signed-off-by: Tom Rini <trini@ti.com>

24 files changed, 487 insertions, 27 deletions

diff --git a/include/configs/beaver.h b/include/configs/beaver.h
index d51f5f8..628d5d3 100644
--- a/include/configs/beaver.h
+++ b/include/configs/beaver.h
@@ -71,6 +71,20 @@
 #define CONFIG_CMD_SF
 #define CONFIG_SPI_FLASH_SIZE          (4 << 20)
 
+/* USB Host support */
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_TEGRA
+#define CONFIG_USB_STORAGE
+#define CONFIG_CMD_USB
+
+/* USB networking support */
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+
+/* General networking support */
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_DHCP
+
 #include "tegra-common-post.h"
 
 #endif /* __CONFIG_H */
diff --git a/include/configs/cardhu.h b/include/configs/cardhu.h
index f3916de..142d20b 100644
--- a/include/configs/cardhu.h
+++ b/include/configs/cardhu.h
@@ -70,6 +70,20 @@
 #define CONFIG_CMD_SF
 #define CONFIG_SPI_FLASH_SIZE          (4 << 20)
 
+/* USB Host support */
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_TEGRA
+#define CONFIG_USB_STORAGE
+#define CONFIG_CMD_USB
+
+/* USB networking support */
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+
+/* General networking support */
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_DHCP
+
 #include "tegra-common-post.h"
 
 #endif /* __CONFIG_H */
diff --git a/include/configs/dalmore.h b/include/configs/dalmore.h
index 6d7a187..b6e0161 100644
--- a/include/configs/dalmore.h
+++ b/include/configs/dalmore.h
@@ -75,6 +75,20 @@
 #define CONFIG_CMD_SF
 #define CONFIG_SPI_FLASH_SIZE          (4 << 20)
 
+/* USB Host support */
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_TEGRA
+#define CONFIG_USB_STORAGE
+#define CONFIG_CMD_USB
+
+/* USB networking support */
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+
+/* General networking support */
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_DHCP
+
 #include "tegra-common-post.h"
 
 #endif /* __CONFIG_H */
diff --git a/include/configs/exynos5250-dt.h b/include/configs/exynos5250-dt.h
index e2a096b..582c584 100644
--- a/include/configs/exynos5250-dt.h
+++ b/include/configs/exynos5250-dt.h
@@ -86,9 +86,9 @@
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (4 << 20))
 
 /* select serial console configuration */
-#define CONFIG_SERIAL3			/* use SERIAL 3 */
 #define CONFIG_BAUDRATE			115200
 #define EXYNOS5_DEFAULT_UART_OFFSET	0x010000
+#define CONFIG_SILENT_CONSOLE
 
 /* Enable keyboard */
 #define CONFIG_CROS_EC		/* CROS_EC protocol */
@@ -120,6 +120,7 @@
 
 
 #define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_SKIP_LOWLEVEL_INIT
 
 /* PWM */
 #define CONFIG_PWM
@@ -153,6 +154,7 @@
 #define CONFIG_USB_STORAGE
 
 /* USB boot mode */
+#define CONFIG_USB_BOOTING
 #define EXYNOS_COPY_USB_FNPTR_ADDR	0x02020070
 #define EXYNOS_USB_SECONDARY_BOOT	0xfeed0002
 #define EXYNOS_IRAM_SECONDARY_BASE	0x02020018
@@ -168,8 +170,10 @@
 #define CONFIG_SPL
 #define COPY_BL2_FNPTR_ADDR	0x02020030
 
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+
 /* specific .lds file */
-#define CONFIG_SPL_LDSCRIPT	"board/samsung/smdk5250/smdk5250-uboot-spl.lds"
+#define CONFIG_SPL_LDSCRIPT	"board/samsung/common/exynos-uboot-spl.lds"
 #define CONFIG_SPL_TEXT_BASE	0x02023400
 #define CONFIG_SPL_MAX_FOOTPRINT	(14 * 1024)
 
@@ -245,7 +249,7 @@
 #define BL2_START_OFFSET	(CONFIG_BL2_OFFSET/512)
 #define BL2_SIZE_BLOC_COUNT	(CONFIG_BL2_SIZE/512)
 
-#define OM_STAT				(0x1f << 1)
+#define CONFIG_SPI_BOOTING
 #define EXYNOS_COPY_SPI_FNPTR_ADDR	0x02020058
 #define SPI_FLASH_UBOOT_POS		(CONFIG_SEC_FW_SIZE + CONFIG_BL1_SIZE)
 
@@ -257,7 +261,7 @@
 
 #define CONFIG_IRAM_STACK	0x02050000
 
-#define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_SYS_LOAD_ADDR - 0x1000000)
+#define CONFIG_SYS_INIT_SP_ADDR	CONFIG_IRAM_STACK
 
 /* I2C */
 #define CONFIG_SYS_I2C_INIT_BOARD
diff --git a/include/configs/harmony.h b/include/configs/harmony.h
index 0c73f86..27aaf16 100644
--- a/include/configs/harmony.h
+++ b/include/configs/harmony.h
@@ -49,6 +49,7 @@
 #define CONFIG_MACH_TYPE		MACH_TYPE_HARMONY
 
 #define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_LATE_INIT		/* Make sure LCD init is complete */
 
 /* SD/MMC */
 #define CONFIG_MMC
@@ -83,6 +84,14 @@
 #define CONFIG_CMD_NET
 #define CONFIG_CMD_DHCP
 
+/* LCD support */
+#define CONFIG_LCD
+#define CONFIG_PWM_TEGRA
+#define CONFIG_VIDEO_TEGRA
+#define LCD_BPP				LCD_COLOR16
+#define CONFIG_SYS_WHITE_ON_BLACK
+#define CONFIG_CONSOLE_SCROLL_LINES	10
+
 #include "tegra-common-post.h"
 
 #endif /* __CONFIG_H */
diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h
index 5b3fa43..10ccc3b 100644
--- a/include/configs/m28evk.h
+++ b/include/configs/m28evk.h
@@ -70,6 +70,7 @@
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_MMC
 #define CONFIG_CMD_NAND
+#define CONFIG_CMD_NAND_TRIMFFS
 #define CONFIG_CMD_NET
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_PING
diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h
index 13d1839..4383375d 100644
--- a/include/configs/mx51evk.h
+++ b/include/configs/mx51evk.h
@@ -162,8 +162,8 @@
 	"boot_fdt=try\0" \
 	"ip_dyn=yes\0" \
 	"mmcdev=0\0" \
-	"mmcpart=2\0" \
-	"mmcroot=/dev/mmcblk0p3 rootwait rw\0" \
+	"mmcpart=1\0" \
+	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
 	"mmcargs=setenv bootargs console=ttymxc0,${baudrate} " \
 		"root=${mmcroot}\0" \
 	"loadbootscript=" \
diff --git a/include/configs/mx53ard.h b/include/configs/mx53ard.h
index b0a965f..fa160e4 100644
--- a/include/configs/mx53ard.h
+++ b/include/configs/mx53ard.h
@@ -118,8 +118,8 @@
 	"boot_fdt=try\0" \
 	"ip_dyn=yes\0" \
 	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
-	"mmcpart=2\0" \
-	"mmcroot=/dev/mmcblk0p3 rootwait rw\0" \
+	"mmcpart=1\0" \
+	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
 	"update_sd_firmware_filename=u-boot.imx\0" \
 	"update_sd_firmware=" \
 		"if test ${ip_dyn} = yes; then " \
diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h
index a4b610f..cc31e9b 100644
--- a/include/configs/mx53loco.h
+++ b/include/configs/mx53loco.h
@@ -124,8 +124,8 @@
 	"boot_fdt=try\0" \
 	"ip_dyn=yes\0" \
 	"mmcdev=0\0" \
-	"mmcpart=2\0" \
-	"mmcroot=/dev/mmcblk0p3 rw rootwait\0" \
+	"mmcpart=1\0" \
+	"mmcroot=/dev/mmcblk0p2 rw rootwait\0" \
 	"mmcargs=setenv bootargs console=ttymxc0,${baudrate} root=${mmcroot}\0" \
 	"loadbootscript=" \
 		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
diff --git a/include/configs/mx6qsabreauto.h b/include/configs/mx6qsabreauto.h
index 76f7812..a396acf 100644
--- a/include/configs/mx6qsabreauto.h
+++ b/include/configs/mx6qsabreauto.h
@@ -30,7 +30,7 @@
 #define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS	0
 
-#include "mx6qsabre_common.h"
+#include "mx6sabre_common.h"
 
 #define CONFIG_SYS_FSL_USDHC_NUM	2
 #if defined(CONFIG_ENV_IS_IN_MMC)
diff --git a/include/configs/mx6qsabrelite.h b/include/configs/mx6qsabrelite.h
index b814418..c7db81d 100644
--- a/include/configs/mx6qsabrelite.h
+++ b/include/configs/mx6qsabrelite.h
@@ -170,8 +170,8 @@
 	"boot_fdt=try\0" \
 	"ip_dyn=yes\0" \
 	"mmcdev=0\0" \
-	"mmcpart=2\0" \
-	"mmcroot=/dev/mmcblk0p3 rootwait rw\0" \
+	"mmcpart=1\0" \
+	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
 	"mmcargs=setenv bootargs console=${console},${baudrate} " \
 		"root=${mmcroot}\0" \
 	"loadbootscript=" \
diff --git a/include/configs/mx6qsabre_common.h b/include/configs/mx6sabre_common.h
index bfaa420..53cc559 100644
--- a/include/configs/mx6qsabre_common.h
+++ b/include/configs/mx6sabre_common.h
@@ -18,7 +18,6 @@
 #define __MX6QSABRE_COMMON_CONFIG_H
 
 #define CONFIG_MX6
-#define CONFIG_MX6Q
 
 #include "mx6_common.h"
 
diff --git a/include/configs/mx6qsabresd.h b/include/configs/mx6sabresd.h
index 44f07cb..76675f4 100644
--- a/include/configs/mx6qsabresd.h
+++ b/include/configs/mx6sabresd.h
@@ -24,7 +24,7 @@
 #define CONFIG_DEFAULT_FDT_FILE	"imx6q-sabresd.dtb"
 #define PHYS_SDRAM_SIZE		(1u * 1024 * 1024 * 1024)
 
-#include "mx6qsabre_common.h"
+#include "mx6sabre_common.h"
 
 #define CONFIG_SYS_FSL_USDHC_NUM	3
 #if defined(CONFIG_ENV_IS_IN_MMC)
diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h
index 19dcdd6..55e3ad9 100644
--- a/include/configs/mx6slevk.h
+++ b/include/configs/mx6slevk.h
@@ -73,8 +73,8 @@
 	"boot_fdt=try\0" \
 	"ip_dyn=yes\0" \
 	"mmcdev=0\0" \
-	"mmcpart=2\0" \
-	"mmcroot=/dev/mmcblk0p3 rootwait rw\0" \
+	"mmcpart=1\0" \
+	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
 	"mmcargs=setenv bootargs console=${console},${baudrate} " \
 		"root=${mmcroot}\0" \
 	"loadbootscript=" \
diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h
index aea91bc..74df66c 100644
--- a/include/configs/nitrogen6x.h
+++ b/include/configs/nitrogen6x.h
@@ -276,8 +276,6 @@
 #define CONFIG_OF_LIBFDT
 #define CONFIG_CMD_BOOTZ
 
-#define CONFIG_SYS_DCACHE_OFF
-
 #ifndef CONFIG_SYS_DCACHE_OFF
 #define CONFIG_CMD_CACHE
 #endif
@@ -287,4 +285,8 @@
 #define CONFIG_CMD_TIME
 #define CONFIG_SYS_ALT_MEMTEST
 
+#define CONFIG_CMD_BOOTZ
+#define CONFIG_SUPPORT_RAW_INITRD
+#define CONFIG_CMD_FS_GENERIC
+
 #endif	       /* __CONFIG_H */
diff --git a/include/configs/origen.h b/include/configs/origen.h
index e179911..5013aee 100644
--- a/include/configs/origen.h
+++ b/include/configs/origen.h
@@ -36,6 +36,7 @@
 #define CONFIG_ARCH_CPU_INIT
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_BOARD_EARLY_INIT_F
 
 /* Keep L2 Cache Disabled */
 #define CONFIG_L2_OFF			1
@@ -67,6 +68,8 @@
 #define CONFIG_BAUDRATE			115200
 #define EXYNOS4_DEFAULT_UART_OFFSET	0x020000
 
+#define CONFIG_SKIP_LOWLEVEL_INIT
+
 /* SD/MMC configuration */
 #define CONFIG_GENERIC_MMC
 #define CONFIG_MMC
@@ -147,7 +150,10 @@
 #define CONFIG_ENV_OFFSET		(RESERVE_BLOCK_SIZE + BL1_SIZE)
 #define CONFIG_DOS_PARTITION		1
 
-#define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_SYS_LOAD_ADDR - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SPL_LDSCRIPT	"board/samsung/common/exynos-uboot-spl.lds"
+#define CONFIG_SPL_MAX_FOOTPRINT	(14 * 1024)
+
+#define CONFIG_SYS_INIT_SP_ADDR		0x02040000
 
 /* U-boot copy size from boot Media to DRAM.*/
 #define COPY_BL2_SIZE		0x80000
@@ -156,4 +162,5 @@
 
 /* Enable devicetree support */
 #define CONFIG_OF_LIBFDT
+
 #endif	/* __CONFIG_H */
diff --git a/include/configs/palmtreo680.h b/include/configs/palmtreo680.h
new file mode 100644
index 0000000..2ab6fd2
--- /dev/null
+++ b/include/configs/palmtreo680.h
@@ -0,0 +1,286 @@
+/*
+ * Palm Treo 680 configuration file
+ *
+ * Copyright (C) 2013 Mike Dunn <mikedunn@newsguy.com>
+ *
+ * This file is released under the terms of GPL v2 and any later version.
+ * See the file COPYING in the root directory of the source tree for details.
+ *
+ */
+
+#ifndef	__CONFIG_H
+#define	__CONFIG_H
+
+/*
+ * High Level Board Configuration Options
+ */
+#define CONFIG_CPU_PXA27X
+#define CONFIG_PALMTREO680
+#define CONFIG_MACH_TYPE                MACH_TYPE_TREO680
+
+#define CONFIG_SYS_MALLOC_LEN           (4096*1024)
+
+#define CONFIG_LZMA
+
+/*
+ * Serial Console Configuration
+ */
+#define CONFIG_PXA_SERIAL
+#define CONFIG_FFUART                   1
+#define CONFIG_BAUDRATE                 9600
+#define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_CONS_INDEX               3
+
+/* we have nand (although technically nand *is* flash...) */
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_LCD
+/* #define CONFIG_KEYBOARD */  /* TODO */
+
+/*
+ * Bootloader Components Configuration
+ */
+#include <config_cmd_default.h>
+#undef  CONFIG_CMD_FPGA
+#undef  CONFIG_CMD_LOADS
+#undef  CONFIG_CMD_NET
+#undef  CONFIG_CMD_NFS
+#undef  CONFIG_CMD_IMLS
+#undef  CONFIG_CMD_FLASH
+#undef  CONFIG_CMD_SETGETDCR
+#undef  CONFIG_CMD_SOURCE
+#undef  CONFIG_CMD_XIMG
+
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_NAND
+
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+
+/*
+ * MMC Card Configuration
+ */
+#ifdef CONFIG_CMD_MMC
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_PXA_MMC_GENERIC
+
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT2
+#define CONFIG_DOS_PARTITION
+#endif
+
+/*
+ * LCD
+ */
+#ifdef CONFIG_LCD
+#define CONFIG_PXA_LCD
+#define CONFIG_ACX544AKN
+#define CONFIG_LCD_LOGO
+#define CONFIG_SYS_LCD_PXA_NO_L_BIAS /* don't configure GPIO77 as L_BIAS */
+#define LCD_BPP LCD_COLOR16
+#define CONFIG_FB_ADDR 0x5c000000    /* internal SRAM */
+#define CONFIG_CMD_BMP
+#define CONFIG_SPLASH_SCREEN         /* requires "splashimage" env var */
+#define CONFIG_SPLASH_SCREEN_ALIGN   /* requires "splashpos" env var */
+#define CONFIG_VIDEO_BMP_GZIP
+#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE  (2 << 20)
+
+#endif
+
+/*
+ * KGDB
+ */
+#ifdef CONFIG_CMD_KGDB
+#define CONFIG_KGDB_BAUDRATE            230400  /* kgdb serial port speed */
+#define CONFIG_KGDB_SER_INDEX           2       /* which serial port to use */
+#endif
+
+/*
+ * HUSH Shell Configuration
+ */
+#define CONFIG_SYS_HUSH_PARSER          1
+#define CONFIG_SYS_PROMPT_HUSH_PS2      "> "
+
+#define CONFIG_SYS_LONGHELP
+#ifdef CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT               "$ "
+#else
+#define CONFIG_SYS_PROMPT               "=> "
+#endif
+#define CONFIG_SYS_CBSIZE               256
+#define CONFIG_SYS_PBSIZE               \
+	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+#define CONFIG_SYS_MAXARGS              16
+#define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
+#define CONFIG_SYS_DEVICE_NULLDEV       1
+
+/*
+ * Clock Configuration
+ */
+#undef  CONFIG_SYS_CLKS_IN_HZ
+#define CONFIG_SYS_HZ                   1000 /* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_CPUSPEED             0x210           /* 416MHz ; N=2,L=16 */
+
+/*
+ * Stack sizes
+ */
+#define CONFIG_STACKSIZE                (128*1024)      /* regular stack */
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ            (4*1024)        /* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ            (4*1024)        /* FIQ stack */
+#endif
+
+/*
+ * DRAM Map
+ */
+#define CONFIG_NR_DRAM_BANKS            1               /* 1 bank of DRAM */
+#define PHYS_SDRAM_1                    0xa0000000      /* SDRAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE               0x04000000      /* 64 MB */
+
+#define CONFIG_SYS_DRAM_BASE            0xa0000000
+#define CONFIG_SYS_DRAM_SIZE            0x04000000      /* 64 MB DRAM */
+
+#define CONFIG_SYS_MEMTEST_START        0xa0400000      /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END          0xa0800000      /* 4 ... 8 MB in DRAM */
+#define CONFIG_SYS_LOAD_ADDR            CONFIG_SYS_DRAM_BASE
+#define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
+
+/*
+ * GPIO settings
+ */
+#define CONFIG_SYS_GAFR0_L_VAL  0x0E000000
+#define CONFIG_SYS_GAFR0_U_VAL  0xA500001A
+#define CONFIG_SYS_GAFR1_L_VAL  0x60000002
+#define CONFIG_SYS_GAFR1_U_VAL  0xAAA07959
+#define CONFIG_SYS_GAFR2_L_VAL  0x02AAAAAA
+#define CONFIG_SYS_GAFR2_U_VAL  0x41440F08
+#define CONFIG_SYS_GAFR3_L_VAL  0x56AA95FF
+#define CONFIG_SYS_GAFR3_U_VAL  0x00001401
+#define CONFIG_SYS_GPCR0_VAL    0x1FF80400
+#define CONFIG_SYS_GPCR1_VAL    0x03003FC1
+#define CONFIG_SYS_GPCR2_VAL    0x01C1E000
+#define CONFIG_SYS_GPCR3_VAL    0x01C1E000
+#define CONFIG_SYS_GPDR0_VAL    0xCFF90400
+#define CONFIG_SYS_GPDR1_VAL    0xFB22BFC1
+#define CONFIG_SYS_GPDR2_VAL    0x93CDFFDF
+#define CONFIG_SYS_GPDR3_VAL    0x0069FF81
+#define CONFIG_SYS_GPSR0_VAL    0x02000018
+#define CONFIG_SYS_GPSR1_VAL    0x00000000
+#define CONFIG_SYS_GPSR2_VAL    0x000C0000
+#define CONFIG_SYS_GPSR3_VAL    0x00080000
+
+#define CONFIG_SYS_PSSR_VAL     0x30
+
+/*
+ * Clock settings
+ */
+#define CONFIG_SYS_CKEN         0x01ffffff
+#define CONFIG_SYS_CCCR         0x02000210
+
+/*
+ * Memory settings
+ */
+#define CONFIG_SYS_MSC0_VAL     0x7ff844c8
+#define CONFIG_SYS_MSC1_VAL     0x7ff86ab4
+#define CONFIG_SYS_MSC2_VAL     0x7ff87ff8
+#define CONFIG_SYS_MDCNFG_VAL   0x0B880acd
+#define CONFIG_SYS_MDREFR_VAL   0x201fa031
+#define CONFIG_SYS_MDMRS_VAL    0x00320032
+#define CONFIG_SYS_FLYCNFG_VAL  0x00000000
+#define CONFIG_SYS_SXCNFG_VAL   0x40044004
+#define CONFIG_SYS_MECR_VAL     0x00000003
+#define CONFIG_SYS_MCMEM0_VAL   0x0001c391
+#define CONFIG_SYS_MCMEM1_VAL   0x0001c391
+#define CONFIG_SYS_MCATT0_VAL   0x0001c391
+#define CONFIG_SYS_MCATT1_VAL   0x0001c391
+#define CONFIG_SYS_MCIO0_VAL    0x00014611
+#define CONFIG_SYS_MCIO1_VAL    0x0001c391
+
+/*
+ * USB
+ */
+#define CONFIG_USB_DEVICE
+#define CONFIG_USB_TTY
+#define CONFIG_USB_DEV_PULLUP_GPIO 114
+
+/*
+ * SPL
+ */
+#define CONFIG_SPL
+#define CONFIG_SPL_TEXT_BASE    0xa1700000 /* IPL loads SPL here */
+#define CONFIG_SPL_STACK        0x5c040000 /* end of internal SRAM */
+#define CONFIG_SPL_NAND_SUPPORT /* build libnand for spl */
+#define CONFIG_SPL_NAND_DOCG4   /* use lean docg4 nand spl driver */
+#define CONFIG_SPL_LIBGENERIC_SUPPORT  /* spl uses memcpy */
+
+/*
+ * NAND
+ */
+#define CONFIG_NAND_DOCG4
+#define CONFIG_SYS_NAND_SELF_INIT
+#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* only one device */
+#define CONFIG_SYS_NAND_BASE 0x00000000 /* mapped to reset vector */
+#define CONFIG_SYS_NAND_PAGE_SIZE 0x200
+#define CONFIG_SYS_NAND_BLOCK_SIZE 0x40000
+#define CONFIG_BITREVERSE       /* needed by docg4 driver */
+#define CONFIG_BCH              /* needed by docg4 driver */
+
+/*
+ * IMPORTANT NOTE: this is the size of the concatenated spl + u-boot image.  It
+ * will be rounded up to the next 64k boundary (the spl flash block size), so it
+ * does not have to be exact, but you must ensure that it is not less than the
+ * actual image size, or it may fail to boot (bricked phone)!
+ * (Tip: reduces to three blocks with lcd and mmc support removed from u-boot.)
+*/
+#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x40000 /* four 64k flash blocks */
+
+/*
+ * This is the byte offset into the flash at which the concatenated spl + u-boot
+ * image is placed.  It must be at the start of a block (256k boundary).  Blocks
+ * 0 - 5 are write-protected, so we start at block 6.
+ */
+#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x180000  /* block 6 */
+
+/* DRAM address to which u-boot proper is loaded (before it relocates itself) */
+#define CONFIG_SYS_NAND_U_BOOT_DST  0xa0000000
+#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST
+
+/* passed to linker by Makefile as arg to -Ttext option */
+#define CONFIG_SYS_TEXT_BASE 0xa0000000
+
+#define CONFIG_SYS_INIT_SP_ADDR         0x5c040000 /* end of internal SRAM */
+
+/*
+ * environment
+ */
+#define CONFIG_ENV_IS_NOWHERE
+#define CONFIG_BUILD_ENVCRC
+#define CONFIG_ENV_SIZE 0x200
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_EXTRA_ENV_SETTINGS  \
+	"stdin=usbtty\0"           \
+	"stdout=usbtty\0"          \
+	"stderr=usbtty"
+#define CONFIG_BOOTARGS "mtdparts=Msys_Diskonchip_G4:1536k(protected_part)ro,1024k(bootloader_part),-(filesys_part) \
+ip=192.168.11.102:::255.255.255.0:treo:usb0"
+#define CONFIG_BOOTDELAY   3
+
+#if 0 /* example: try 2nd mmc partition, then nand */
+#define CONFIG_BOOTCOMMAND                                              \
+	"mmc rescan; "                                                  \
+	"if mmcinfo && ext2load mmc 0:2 0xa1000000 uImage; then "       \
+	    "bootm 0xa1000000; "					\
+	"elif nand read 0xa1000000 0x280000 0x240000; then "            \
+	    "bootm 0xa1000000; "					\
+	"fi; "
+#endif
+
+/* u-boot lives at end of SDRAM, so use start of SDRAM for stand alone apps */
+#define CONFIG_STANDALONE_LOAD_ADDR 0xa0000000
+
+#define CONFIG_SYS_DCACHE_OFF
+#define CONFIG_SYS_ICACHE_OFF
+
+#endif  /* __CONFIG_H */
diff --git a/include/configs/smdkv310.h b/include/configs/smdkv310.h
index 5e43066..0f04597 100644
--- a/include/configs/smdkv310.h
+++ b/include/configs/smdkv310.h
@@ -36,6 +36,7 @@
 #define CONFIG_ARCH_CPU_INIT
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_BOARD_EARLY_INIT_F
 
 /* Mach Type */
 #define CONFIG_MACH_TYPE		MACH_TYPE_SMDKV310
@@ -57,6 +58,7 @@
 /* Handling Sleep Mode*/
 #define S5P_CHECK_SLEEP			0x00000BAD
 #define S5P_CHECK_DIDLE			0xBAD00000
+#define S5P_CHECK_LPA			0xABAD0000
 
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (1 << 20))
@@ -93,6 +95,7 @@
 
 /* MMC SPL */
 #define CONFIG_SPL
+#define CONFIG_SKIP_LOWLEVEL_INIT
 #define COPY_BL2_FNPTR_ADDR	0x00002488
 
 #define CONFIG_SPL_TEXT_BASE	0x02021410
@@ -146,7 +149,10 @@
 #define CONFIG_ENV_OFFSET		(RESERVE_BLOCK_SIZE + BL1_SIZE)
 #define CONFIG_DOS_PARTITION		1
 
-#define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_SYS_LOAD_ADDR - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SPL_LDSCRIPT	"board/samsung/common/exynos-uboot-spl.lds"
+#define CONFIG_SPL_MAX_FOOTPRINT	(14 * 1024)
+
+#define CONFIG_SYS_INIT_SP_ADDR		0x02040000
 
 /* U-boot copy size from boot Media to DRAM.*/
 #define	COPY_BL2_SIZE		0x80000
diff --git a/include/configs/tegra114-common.h b/include/configs/tegra114-common.h
index 721b29c..44e98e5 100644
--- a/include/configs/tegra114-common.h
+++ b/include/configs/tegra114-common.h
@@ -77,4 +77,7 @@
 /* Total I2C ports on Tegra114 */
 #define TEGRA_I2C_NUM_CONTROLLERS	5
 
+/* For USB EHCI controller */
+#define CONFIG_EHCI_IS_TDI
+
 #endif /* _TEGRA114_COMMON_H_ */
diff --git a/include/configs/tegra30-common.h b/include/configs/tegra30-common.h
index ed36e11..7ea36be 100644
--- a/include/configs/tegra30-common.h
+++ b/include/configs/tegra30-common.h
@@ -90,4 +90,7 @@
 /* Total I2C ports on Tegra30 */
 #define TEGRA_I2C_NUM_CONTROLLERS	5
 
+/* For USB EHCI controller */
+#define CONFIG_EHCI_IS_TDI
+
 #endif /* _TEGRA30_COMMON_H_ */
diff --git a/include/configs/trats.h b/include/configs/trats.h
index c70838b..103295e 100644
--- a/include/configs/trats.h
+++ b/include/configs/trats.h
@@ -66,7 +66,7 @@
 #define CONFIG_MACH_TYPE		MACH_TYPE_TRATS
 
 /* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (1 << 20))
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (16 << 20))
 
 /* select serial console configuration */
 #define CONFIG_SERIAL2			/* use SERIAL 2 */
diff --git a/include/configs/ventana.h b/include/configs/ventana.h
index 41a7176..05e682c 100644
--- a/include/configs/ventana.h
+++ b/include/configs/ventana.h
@@ -43,6 +43,7 @@
 #define CONFIG_MACH_TYPE		MACH_TYPE_VENTANA
 
 #define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_LATE_INIT		/* Make sure LCD init is complete */
 
 /* SD/MMC */
 #define CONFIG_MMC
@@ -73,6 +74,14 @@
 /* USB keyboard */
 #define CONFIG_USB_KEYBOARD
 
+/* LCD support */
+#define CONFIG_LCD
+#define CONFIG_PWM_TEGRA
+#define CONFIG_VIDEO_TEGRA
+#define LCD_BPP				LCD_COLOR16
+#define CONFIG_SYS_WHITE_ON_BLACK
+#define CONFIG_CONSOLE_SCROLL_LINES	10
+
 #include "tegra-common-post.h"
 
 #endif /* __CONFIG_H */
diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h
index 77fe893..5012fc8 100644
--- a/include/configs/vf610twr.h
+++ b/include/configs/vf610twr.h
@@ -83,13 +83,101 @@
 
 #define CONFIG_BOOTDELAY		3
 
+#define CONFIG_LOADADDR			0x82000000
 #define CONFIG_SYS_TEXT_BASE		0x3f008000
 
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"script=boot.scr\0" \
+	"uimage=uImage\0" \
+	"console=ttyLP1\0" \
+	"fdt_high=0xffffffff\0" \
+	"initrd_high=0xffffffff\0" \
+	"fdt_file=vf610-twr.dtb\0" \
+	"fdt_addr=0x81000000\0" \
+	"boot_fdt=try\0" \
+	"ip_dyn=yes\0" \
+	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
+	"mmcpart=1\0" \
+	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
+	"update_sd_firmware_filename=u-boot.imx\0" \
+	"update_sd_firmware=" \
+		"if test ${ip_dyn} = yes; then " \
+			"setenv get_cmd dhcp; " \
+		"else " \
+			"setenv get_cmd tftp; " \
+		"fi; " \
+		"if mmc dev ${mmcdev}; then "	\
+			"if ${get_cmd} ${update_sd_firmware_filename}; then " \
+				"setexpr fw_sz ${filesize} / 0x200; " \
+				"setexpr fw_sz ${fw_sz} + 1; "	\
+				"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
+			"fi; "	\
+		"fi\0" \
+	"mmcargs=setenv bootargs console=${console},${baudrate} " \
+		"root=${mmcroot}\0" \
+	"loadbootscript=" \
+		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
+	"bootscript=echo Running bootscript from mmc ...; " \
+		"source\0" \
+	"loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
+	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
+	"mmcboot=echo Booting from mmc ...; " \
+		"run mmcargs; " \
+		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+			"if run loadfdt; then " \
+				"bootm ${loadaddr} - ${fdt_addr}; " \
+			"else " \
+				"if test ${boot_fdt} = try; then " \
+					"bootm; " \
+				"else " \
+					"echo WARN: Cannot load the DT; " \
+				"fi; " \
+			"fi; " \
+		"else " \
+			"bootm; " \
+		"fi;\0" \
+	"netargs=setenv bootargs console=${console},${baudrate} " \
+		"root=/dev/nfs " \
+	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
+		"netboot=echo Booting from net ...; " \
+		"run netargs; " \
+		"if test ${ip_dyn} = yes; then " \
+			"setenv get_cmd dhcp; " \
+		"else " \
+			"setenv get_cmd tftp; " \
+		"fi; " \
+		"${get_cmd} ${uimage}; " \
+		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
+				"bootm ${loadaddr} - ${fdt_addr}; " \
+			"else " \
+				"if test ${boot_fdt} = try; then " \
+					"bootm; " \
+				"else " \
+					"echo WARN: Cannot load the DT; " \
+				"fi; " \
+			"fi; " \
+		"else " \
+			"bootm; " \
+		"fi;\0"
+
+#define CONFIG_BOOTCOMMAND \
+	   "mmc dev ${mmcdev}; if mmc rescan; then " \
+		   "if run loadbootscript; then " \
+			   "run bootscript; " \
+		   "else " \
+			   "if run loaduimage; then " \
+				   "run mmcboot; " \
+			   "else run netboot; " \
+			   "fi; " \
+		   "fi; " \
+	   "else run netboot; fi"
+
 /* Miscellaneous configurable options */
 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
 #define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
 #define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
-#define CONFIG_SYS_PROMPT		"Vybrid U-Boot > "
+#define CONFIG_SYS_PROMPT		"=> "
 #undef CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
 #define CONFIG_SYS_PBSIZE		\
@@ -101,8 +189,7 @@
 #define CONFIG_SYS_MEMTEST_START	0x80010000
 #define CONFIG_SYS_MEMTEST_END		0x87C00000
 
-#define CONFIG_SYS_LOAD_ADDR		0x80010000
-
+#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
 #define CONFIG_SYS_HZ			1000
 
 /*
diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h
index 5593f1c..ee6bf21 100644
--- a/include/configs/wandboard.h
+++ b/include/configs/wandboard.h
@@ -103,6 +103,8 @@
 
 #if defined(CONFIG_MX6DL)
 #define CONFIG_DEFAULT_FDT_FILE		"imx6dl-wandboard.dtb"
+#elif defined(CONFIG_MX6Q)
+#define CONFIG_DEFAULT_FDT_FILE		"imx6q-wandboard.dtb"
 #elif defined(CONFIG_MX6S)
 #define CONFIG_DEFAULT_FDT_FILE		"imx6s-wandboard.dtb"
 #endif
@@ -118,8 +120,8 @@
 	"boot_fdt=try\0" \
 	"ip_dyn=yes\0" \
 	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
-	"mmcpart=2\0" \
-	"mmcroot=/dev/mmcblk0p3 rootwait rw\0" \
+	"mmcpart=1\0" \
+	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
 	"update_sd_firmware_filename=u-boot.imx\0" \
 	"update_sd_firmware=" \
 		"if test ${ip_dyn} = yes; then " \