Merge branch 'master' of git://git.denx.de/u-boot

Signed-off-by: Stefano Babic <sbabic@denx.de> Conflicts: boards.cfg
author: Stefano Babic <sbabic@denx.de> 2014-07-16 08:51:30 +0200
committer: Stefano Babic <sbabic@denx.de> 2014-07-16 08:51:30 +0200
commit: dab5e3469d294a4e1ffed8407d296a78e02cc01f (patch)
tree: c6378034591210b3142ca3add806d52c6ea22b3b /include/configs
parent: 14a1613140519a8d0a88e6054c302a8cb3e067a5 (diff)
parent: 524123a70761110c5cf3ccc5f52f6d4da071b959 (diff)
download: u-boot-imx-dab5e3469d294a4e1ffed8407d296a78e02cc01f.zip
u-boot-imx-dab5e3469d294a4e1ffed8407d296a78e02cc01f.tar.gz
u-boot-imx-dab5e3469d294a4e1ffed8407d296a78e02cc01f.tar.bz2
107 files changed, 1322 insertions, 9807 deletions
diff --git a/include/configs/Adder.h b/include/configs/Adder.h
deleted file mode 100644
index 140f443..0000000
--- a/include/configs/Adder.h
+++ /dev/null
@@ -1,193 +0,0 @@
-/*
- * Copyright (C) 2004-2005 Arabella Software Ltd.
- * Yuli Barcohen <yuli@arabellasw.com>
- *
- * Support for Analogue&Micro Adder boards family.
- * Tested on AdderII and Adder87x.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#if !defined(CONFIG_MPC875) && !defined(CONFIG_MPC852T)
-#define CONFIG_MPC875
-#endif
-
-#define CONFIG_ADDER				/* Analogue&Micro Adder board	*/
-
-#define	CONFIG_SYS_TEXT_BASE	0xFE000000
-
-#define	CONFIG_8xx_CONS_SMC1	1		/* Console is on SMC1		*/
-#define CONFIG_BAUDRATE		38400
-
-#define CONFIG_ETHER_ON_FEC1
-#define CONFIG_ETHER_ON_FEC2
-#define CONFIG_HAS_ETH0
-#define CONFIG_HAS_ETH1
-
-#if defined(CONFIG_ETHER_ON_FEC1) || defined(CONFIG_ETHER_ON_FEC2)
-#define CONFIG_SYS_DISCOVER_PHY
-#define CONFIG_MII_INIT		1
-#define FEC_ENET
-#endif /* CONFIG_ETHER_ON_FEC || CONFIG_ETHER_ON_FEC2 */
-
-#define CONFIG_8xx_OSCLK		10000000 /* 10 MHz oscillator on EXTCLK */
-#define CONFIG_8xx_CPUCLK_DEFAULT	50000000
-#define CONFIG_SYS_8xx_CPUCLK_MIN		40000000
-#ifdef CONFIG_MPC852T
-#define CONFIG_SYS_8xx_CPUCLK_MAX		50000000
-#else
-#define CONFIG_SYS_8xx_CPUCLK_MAX		133000000
-#endif /* CONFIG_MPC852T */
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_IMMAP
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-
-
-#define CONFIG_BOOTDELAY	5		/* Autoboot after 5 seconds	*/
-#define CONFIG_BOOTCOMMAND	"bootm fe040000"	/* Autoboot command	*/
-#define CONFIG_BOOTARGS		"root=/dev/mtdblock1 rw mtdparts=1M(ROM)ro,-(root)"
-
-#define CONFIG_BZIP2		/* Include support for bzip2 compressed images  */
-#undef	CONFIG_WATCHDOG		/* Disable platform specific watchdog		*/
-
-/*-----------------------------------------------------------------------
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_LONGHELP				/* #undef to save memory	*/
-#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)  /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS		16		/* Max number of command args	*/
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-
-#define CONFIG_SYS_LOAD_ADDR		0x400000	/* Default load address		*/
-
-/*-----------------------------------------------------------------------
- * RAM configuration (note that CONFIG_SYS_SDRAM_BASE must be zero)
- */
-#define CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_SDRAM_MAX_SIZE	0x01000000	/* Up to 16 Mbyte		*/
-
-#define CONFIG_SYS_MAMR		0x00002114
-
-/*
- * 4096	Up to 4096 SDRAM rows
- * 1000	factor s -> ms
- * 32	PTP (pre-divider from MPTPR)
- * 4	Number of refresh cycles per period
- * 64	Refresh cycle in ms per number of rows
- */
-#define CONFIG_SYS_PTA_PER_CLK		((4096 * 32 * 1000) / (4 * 64))
-
-#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on		*/
-#define CONFIG_SYS_MEMTEST_END		0x00500000	/* 1 ... 5 MB in SDRAM		*/
-
-#define CONFIG_SYS_RESET_ADDRESS	0x09900000
-
-/*-----------------------------------------------------------------------
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
-
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 KB for Monitor   */
-#ifdef CONFIG_BZIP2
-#define CONFIG_SYS_MALLOC_LEN		(2500 << 10)	/* Reserve ~2.5 MB for malloc() */
-#else
-#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 KB for malloc()  */
-#endif /* CONFIG_BZIP2 */
-
-/*-----------------------------------------------------------------------
- * Flash organisation
- */
-#define CONFIG_SYS_FLASH_BASE		0xFE000000
-#define CONFIG_SYS_FLASH_CFI				/* The flash is CFI compatible  */
-#define CONFIG_FLASH_CFI_DRIVER			/* Use common CFI driver        */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* Max number of flash banks	*/
-#define CONFIG_SYS_MAX_FLASH_SECT	128		/* Max num of sects on one chip */
-
-/* Environment is in flash */
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_SECT_SIZE	0x10000		/* We use one complete sector	*/
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
-
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_SYS_OR0_PRELIM		0xFF000774
-#define CONFIG_SYS_BR0_PRELIM		(CONFIG_SYS_FLASH_BASE | BR_PS_16 | BR_MS_GPCM | BR_V)
-
-#define	CONFIG_SYS_DIRECT_FLASH_TFTP
-
-/*-----------------------------------------------------------------------
- * Internal Memory Map Register
- */
-#define CONFIG_SYS_IMMR		0xFF000000
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE	0x2F00		/* Size of used area in DPRAM	*/
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Configuration registers
- */
-#ifdef CONFIG_WATCHDOG
-#define CONFIG_SYS_SYPCR		(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME  | \
-				 SYPCR_SWF  | SYPCR_SWE | SYPCR_SWRI | \
-				 SYPCR_SWP)
-#else
-#define CONFIG_SYS_SYPCR		(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME  | \
-				 SYPCR_SWF  | SYPCR_SWP)
-#endif /* CONFIG_WATCHDOG */
-
-#define CONFIG_SYS_SIUMCR		(SIUMCR_MLRC01 | SIUMCR_DBGC11)
-
-/* TBSCR - Time Base Status and Control Register */
-#define CONFIG_SYS_TBSCR		(TBSCR_TBF | TBSCR_TBE)
-
-/* PISCR - Periodic Interrupt Status and Control */
-#define CONFIG_SYS_PISCR		(PISCR_PS | PISCR_PITF)
-
-/* PLPRCR - PLL, Low-Power, and Reset Control Register */
-/* #define CONFIG_SYS_PLPRCR		PLPRCR_TEXPS */
-
-/* SCCR - System Clock and reset Control Register */
-#define SCCR_MASK		SCCR_EBDF11
-#define CONFIG_SYS_SCCR		SCCR_RTSEL
-
-#define CONFIG_SYS_DER			0
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx chips			*/
-
-/* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT	1
-#define CONFIG_OF_BOARD_SETUP	1
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/HIDDEN_DRAGON.h b/include/configs/HIDDEN_DRAGON.h
deleted file mode 100644
index e0a233b..0000000
--- a/include/configs/HIDDEN_DRAGON.h
+++ /dev/null
@@ -1,371 +0,0 @@
-/*
- * (C) Copyright 2004
- * Yusdi Santoso, Adaptec Inc., yusdi_santoso@adaptec.com
- *
- * (C) Copyright 2001, 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC8245		1
-#define CONFIG_HIDDEN_DRAGON	1
-
-#define	CONFIG_SYS_TEXT_BASE	0xFFF00000
-
-#if 0
-#define USE_DINK32		1
-#else
-#undef USE_DINK32
-#endif
-
-#define CONFIG_CONS_INDEX	3		/* set to '3' for on-chip DUART */
-#define CONFIG_BAUDRATE		9600
-#define CONFIG_DRAM_SPEED	100		/* MHz				*/
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_PING
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP		1		/* undef to save memory		*/
-#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size	*/
-#define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-#define CONFIG_SYS_LOAD_ADDR		0x00100000	/* default load address		*/
-
-/*-----------------------------------------------------------------------
- * PCI stuff
- *-----------------------------------------------------------------------
- */
-#define CONFIG_PCI				/* include pci support		*/
-#define CONFIG_PCI_INDIRECT_BRIDGE	/* indirect PCI bridge support */
-#undef CONFIG_PCI_PNP
-
-
-#define CONFIG_SYS_RX_ETH_BUFFER	8		/* use 8 rx buffer on eepro100	*/
-
-#define PCI_ENET0_IOADDR	0x80000000
-#define PCI_ENET0_MEMADDR	0x80000000
-#define PCI_ENET1_IOADDR	0x81000000
-#define PCI_ENET1_MEMADDR	0x81000000
-
-#define CONFIG_RTL8139
-
-/* Make sure the ethaddr can be overwritten
-   TODO: Remove this on final product
-*/
-#define CONFIG_ENV_OVERWRITE
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_MAX_RAM_SIZE	0x02000000
-
-#define CONFIG_SYS_RESET_ADDRESS	0xFFF00100
-
-#if defined (USE_DINK32)
-#define CONFIG_SYS_MONITOR_LEN		0x00030000
-#define CONFIG_SYS_MONITOR_BASE	0x00090000
-#define CONFIG_SYS_RAMBOOT		1
-#define CONFIG_SYS_INIT_RAM_ADDR	(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
-#define CONFIG_SYS_INIT_RAM_SIZE	0x10000
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-#else
-#undef	CONFIG_SYS_RAMBOOT
-#define CONFIG_SYS_MONITOR_LEN		0x00030000
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE
-
-
-#define CONFIG_SYS_INIT_RAM_ADDR     0x40000000
-#define CONFIG_SYS_INIT_RAM_SIZE      0x1000
-#define CONFIG_SYS_GBL_DATA_OFFSET  (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-
-#endif
-
-#define CONFIG_SYS_FLASH_BASE		0xFFE00000
-#define CONFIG_SYS_FLASH_SIZE		(2 * 1024 * 1024)	/* Unity has onboard 1MByte flash */
-#define CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_OFFSET		0x00004000	/* Offset of Environment Sector */
-#define CONFIG_ENV_SIZE		0x00002000	/* Total Size of Environment Sector */
-
-#define CONFIG_SYS_MALLOC_LEN		(512 << 10)	/* Reserve 512 kB for malloc()	*/
-
-#define CONFIG_SYS_MEMTEST_START	0x00000000	/* memtest works on		*/
-#define CONFIG_SYS_MEMTEST_END		0x02000000	/* 0 ... 32 MB in DRAM		*/
-
-#define CONFIG_SYS_EUMB_ADDR		0xFC000000
-
-#define CONFIG_SYS_ISA_MEM		0xFD000000
-#define CONFIG_SYS_ISA_IO		0xFE000000
-
-#define CONFIG_SYS_FLASH_RANGE_BASE	0xFFE00000	/* flash memory address range	*/
-#define CONFIG_SYS_FLASH_RANGE_SIZE	0x00200000
-#define FLASH_BASE0_PRELIM	0xFFE00000	/* processor board flash	*/
-
-/*
- * select i2c support configuration
- *
- * Supported configurations are {none, software, hardware} drivers.
- * If the software driver is chosen, there are some additional
- * configuration items that the driver uses to drive the port pins.
- */
-#define CONFIG_HARD_I2C		1		/* To enable I2C support	*/
-#undef	CONFIG_SYS_I2C_SOFT			/* I2C bit-banged */
-#define CONFIG_SYS_I2C_SPEED		400000		/* I2C speed and slave address	*/
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-
-#ifdef CONFIG_SYS_I2C_SOFT
-#error "Soft I2C is not configured properly.  Please review!"
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_SOFT_SPEED	50000
-#define CONFIG_SYS_I2C_SOFT_SLAVE	0xFE
-#define I2C_PORT		3		/* Port A=0, B=1, C=2, D=3 */
-#define I2C_ACTIVE		(iop->pdir |=  0x00010000)
-#define I2C_TRISTATE		(iop->pdir &= ~0x00010000)
-#define I2C_READ		((iop->pdat & 0x00010000) != 0)
-#define I2C_SDA(bit)		if(bit) iop->pdat |=  0x00010000; \
-				else	iop->pdat &= ~0x00010000
-#define I2C_SCL(bit)		if(bit) iop->pdat |=  0x00020000; \
-				else	iop->pdat &= ~0x00020000
-#define I2C_DELAY		udelay(5)	/* 1/4 I2C clock duration */
-#endif /* CONFIG_SYS_I2C_SOFT */
-
-#define CONFIG_SYS_I2C_EEPROM_ADDR	0x57		/* EEPROM IS24C02		*/
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1		/* Bytes of address		*/
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10	/* and takes up to 10 msec */
-
-#define CONFIG_SYS_FLASH_BANKS		{ FLASH_BASE0_PRELIM }
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-
-
-/* #define CONFIG_WINBOND_83C553	1	/ *has a winbond bridge			*/
-#define CONFIG_SYS_USE_WINBOND_IDE	0	/*use winbond 83c553 internal IDE ctrlr */
-#define CONFIG_SYS_WINBOND_ISA_CFG_ADDR    0x80005800	/*pci-isa bridge config addr	*/
-#define CONFIG_SYS_WINBOND_IDE_CFG_ADDR    0x80005900	/*ide config addr		*/
-
-#define CONFIG_SYS_IDE_MAXBUS		2   /* max. 2 IDE busses	*/
-#define CONFIG_SYS_IDE_MAXDEVICE	(CONFIG_SYS_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */
-
-/* TODO: Change this to VIA686A */
-
-/*
- * NS87308 Configuration
- */
-#define CONFIG_NS87308			/* Nat Semi super-io controller on ISA bus */
-
-#define CONFIG_SYS_NS87308_BADDR_10	1
-
-#define CONFIG_SYS_NS87308_DEVS	( CONFIG_SYS_NS87308_UART1   | \
-				  CONFIG_SYS_NS87308_UART2   | \
-				  CONFIG_SYS_NS87308_POWRMAN | \
-				  CONFIG_SYS_NS87308_RTC_APC )
-
-#undef	CONFIG_SYS_NS87308_PS2MOD
-
-#define CONFIG_SYS_NS87308_CS0_BASE	0x0076
-#define CONFIG_SYS_NS87308_CS0_CONF	0x30
-#define CONFIG_SYS_NS87308_CS1_BASE	0x0075
-#define CONFIG_SYS_NS87308_CS1_CONF	0x30
-#define CONFIG_SYS_NS87308_CS2_BASE	0x0074
-#define CONFIG_SYS_NS87308_CS2_CONF	0x30
-
-/*
- * NS16550 Configuration
- */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-
-#define CONFIG_SYS_NS16550_REG_SIZE	1
-
-#if (CONFIG_CONS_INDEX > 2)
-#define CONFIG_SYS_NS16550_CLK		CONFIG_DRAM_SPEED*1000000
-#else
-#define CONFIG_SYS_NS16550_CLK		1843200
-#endif
-
-#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_ISA_IO + CONFIG_SYS_NS87308_UART1_BASE)
-#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_ISA_IO + CONFIG_SYS_NS87308_UART2_BASE)
-#define CONFIG_SYS_NS16550_COM3	(CONFIG_SYS_EUMB_ADDR + 0x4500)
-#define CONFIG_SYS_NS16550_COM4	(CONFIG_SYS_EUMB_ADDR + 0x4600)
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-
-#define CONFIG_SYS_CLK_FREQ  33333333	/* external frequency to pll */
-
-#define CONFIG_SYS_ROMNAL		7	/*rom/flash next access time		*/
-#define CONFIG_SYS_ROMFAL		11	/*rom/flash access time			*/
-
-#define CONFIG_SYS_REFINT	430	/* no of clock cycles between CBR refresh cycles */
-
-/* the following are for SDRAM only*/
-#define CONFIG_SYS_BSTOPRE	121	/* Burst To Precharge, sets open page interval */
-#define CONFIG_SYS_REFREC		8	/* Refresh to activate interval		*/
-#define CONFIG_SYS_RDLAT		4	/* data latency from read command	*/
-#define CONFIG_SYS_PRETOACT		3	/* Precharge to activate interval	*/
-#define CONFIG_SYS_ACTTOPRE		5	/* Activate to Precharge interval	*/
-#define CONFIG_SYS_ACTORW		3	/* Activate to R/W			*/
-#define CONFIG_SYS_SDMODE_CAS_LAT	3	/* SDMODE CAS latency			*/
-#define CONFIG_SYS_SDMODE_WRAP		0	/* SDMODE wrap type			*/
-#if 0
-#define CONFIG_SYS_SDMODE_BURSTLEN	2	/* OBSOLETE!  SDMODE Burst length 2=4, 3=8		*/
-#endif
-
-#define CONFIG_SYS_REGISTERD_TYPE_BUFFER   1
-#define CONFIG_SYS_EXTROM 1
-#define CONFIG_SYS_REGDIMM 0
-
-
-/* memory bank settings*/
-/*
- * only bits 20-29 are actually used from these vales to set the
- * start/end address the upper two bits will be 0, and the lower 20
- * bits will be set to 0x00000 for a start address, or 0xfffff for an
- * end address
- */
-#define CONFIG_SYS_BANK0_START		0x00000000
-#define CONFIG_SYS_BANK0_END		(CONFIG_SYS_MAX_RAM_SIZE - 1)
-#define CONFIG_SYS_BANK0_ENABLE	1
-#define CONFIG_SYS_BANK1_START		0x3ff00000
-#define CONFIG_SYS_BANK1_END		0x3fffffff
-#define CONFIG_SYS_BANK1_ENABLE	0
-#define CONFIG_SYS_BANK2_START		0x3ff00000
-#define CONFIG_SYS_BANK2_END		0x3fffffff
-#define CONFIG_SYS_BANK2_ENABLE	0
-#define CONFIG_SYS_BANK3_START		0x3ff00000
-#define CONFIG_SYS_BANK3_END		0x3fffffff
-#define CONFIG_SYS_BANK3_ENABLE	0
-#define CONFIG_SYS_BANK4_START		0x00000000
-#define CONFIG_SYS_BANK4_END		0x00000000
-#define CONFIG_SYS_BANK4_ENABLE	0
-#define CONFIG_SYS_BANK5_START		0x00000000
-#define CONFIG_SYS_BANK5_END		0x00000000
-#define CONFIG_SYS_BANK5_ENABLE	0
-#define CONFIG_SYS_BANK6_START		0x00000000
-#define CONFIG_SYS_BANK6_END		0x00000000
-#define CONFIG_SYS_BANK6_ENABLE	0
-#define CONFIG_SYS_BANK7_START		0x00000000
-#define CONFIG_SYS_BANK7_END		0x00000000
-#define CONFIG_SYS_BANK7_ENABLE	0
-/*
- * Memory bank enable bitmask, specifying which of the banks defined above
- are actually present. MSB is for bank #7, LSB is for bank #0.
- */
-#define CONFIG_SYS_BANK_ENABLE		0x01
-
-#define CONFIG_SYS_ODCR		0xff	/* configures line driver impedances,	*/
-					/* see 8240 book for bit definitions	*/
-#define CONFIG_SYS_PGMAX		0x32	/* how long the 8240 retains the	*/
-					/* currently accessed page in memory	*/
-					/* see 8240 book for details		*/
-
-/* SDRAM 0 - 256MB */
-#define CONFIG_SYS_IBAT0L	(CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT0U	(CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-
-/* stack in DCACHE @ 1GB (no backing mem) */
-#if defined(USE_DINK32)
-#define CONFIG_SYS_IBAT1L	(0x40000000 | BATL_PP_00 )
-#define CONFIG_SYS_IBAT1U	(0x40000000 | BATU_BL_128K )
-#else
-#define CONFIG_SYS_IBAT1L	(CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT1U	(CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
-#endif
-
-/* PCI memory */
-#define CONFIG_SYS_IBAT2L	(0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT2U	(0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-/* Flash, config addrs, etc */
-#define CONFIG_SYS_IBAT3L	(0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT3U	(0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_DBAT0L	CONFIG_SYS_IBAT0L
-#define CONFIG_SYS_DBAT0U	CONFIG_SYS_IBAT0U
-#define CONFIG_SYS_DBAT1L	CONFIG_SYS_IBAT1L
-#define CONFIG_SYS_DBAT1U	CONFIG_SYS_IBAT1U
-#define CONFIG_SYS_DBAT2L	CONFIG_SYS_IBAT2L
-#define CONFIG_SYS_DBAT2U	CONFIG_SYS_IBAT2U
-#define CONFIG_SYS_DBAT3L	CONFIG_SYS_IBAT3L
-#define CONFIG_SYS_DBAT3U	CONFIG_SYS_IBAT3U
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CONFIG_SYS_MAX_FLASH_SECT	36	/* max number of sectors on one chip	*/
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC8240 CPU			*/
-#if defined(CONFIG_CMD_KGDB)
-#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
-#endif
-
-/* values according to the manual */
-#define CONFIG_DRAM_50MHZ	1
-#define CONFIG_SDRAM_50MHZ
-
-#undef	NR_8259_INTS
-#define NR_8259_INTS		1
-
-#define CONFIG_DISK_SPINUP_TIME 1000000
-
-#endif	/* __CONFIG_H */
diff --git a/include/configs/ISPAN.h b/include/configs/ISPAN.h
deleted file mode 100644
index a2fdfd3..0000000
--- a/include/configs/ISPAN.h
+++ /dev/null
@@ -1,330 +0,0 @@
-/*
- * Copyright (C) 2004 Arabella Software Ltd.
- * Yuli Barcohen <yuli@arabellasw.com>
- *
- * Support for Interphase iSPAN Communications Controllers
- * (453x and others). Tested on 4532.
- *
- * Derived from iSPAN 4539 port (iphase4539) by
- * Wolfgang Grandegger <wg@denx.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_ISPAN			/* ...on one of Interphase iSPAN boards */
-#define CONFIG_CPM2		1	/* Has a CPM2 */
-
-#define	CONFIG_SYS_TEXT_BASE	0xFE7A0000
-
-/*-----------------------------------------------------------------------
- * Select serial console configuration
- *
- * If either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
- * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
- * for SCC).
- *
- * If CONFIG_CONS_NONE is defined, then the serial console routines must be
- * defined elsewhere (for example, on the cogent platform, there are serial
- * ports on the motherboard which are used for the serial console - see
- * cogent/cma101/serial.[ch]).
- */
-#define	CONFIG_CONS_ON_SMC		/* Define if console on SMC		*/
-#undef	CONFIG_CONS_ON_SCC		/* Define if console on SCC		*/
-#undef	CONFIG_CONS_NONE		/* Define if console on something else	*/
-#define CONFIG_CONS_INDEX	1	/* Which serial channel for console	*/
-
-/*-----------------------------------------------------------------------
- * Select Ethernet configuration
- *
- * If either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then
- * CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3
- * for FCC).
- *
- * If CONFIG_ETHER_NONE is defined, then either the Ethernet routines must
- * be defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
- */
-#undef	CONFIG_ETHER_ON_SCC		/* Define if Ethernet on SCC		*/
-#define CONFIG_ETHER_ON_FCC		/* Define if Ethernet on FCC		*/
-#undef	CONFIG_ETHER_NONE		/* Define if Ethernet on something else */
-#define CONFIG_ETHER_INDEX	3	/* Which channel for Ethernrt		*/
-
-#ifdef CONFIG_ETHER_ON_FCC
-
-#if CONFIG_ETHER_INDEX == 3
-
-#define CONFIG_SYS_PHY_ADDR		0
-#define CONFIG_SYS_CMXFCR_VALUE3	(CMXFCR_RF3CS_CLK14 | CMXFCR_TF3CS_CLK16)
-#define CONFIG_SYS_CMXFCR_MASK3		(CMXFCR_FC3 | CMXFCR_RF3CS_MSK | CMXFCR_TF3CS_MSK)
-
-#endif /* CONFIG_ETHER_INDEX == 3 */
-
-#define CONFIG_SYS_CPMFCR_RAMTYPE	0
-#define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
-
-#define CONFIG_MII				/* MII PHY management		*/
-#define CONFIG_BITBANGMII			/* Bit-bang MII PHY management	*/
-/*
- * GPIO pins used for bit-banged MII communications
- */
-#define MDIO_PORT		3		/* Port D */
-#define MDIO_DECLARE		volatile ioport_t *iop = ioport_addr ( \
-					(immap_t *) CONFIG_SYS_IMMR, MDIO_PORT )
-#define MDC_DECLARE		MDIO_DECLARE
-
-
-#define CONFIG_SYS_MDIO_PIN		0x00040000	/* PD13 */
-#define CONFIG_SYS_MDC_PIN		0x00080000	/* PD12 */
-
-#define MDIO_ACTIVE		(iop->pdir |=  CONFIG_SYS_MDIO_PIN)
-#define MDIO_TRISTATE		(iop->pdir &= ~CONFIG_SYS_MDIO_PIN)
-#define MDIO_READ		((iop->pdat &  CONFIG_SYS_MDIO_PIN) != 0)
-
-#define MDIO(bit)		if(bit) iop->pdat |=  CONFIG_SYS_MDIO_PIN; \
-				else	iop->pdat &= ~CONFIG_SYS_MDIO_PIN
-
-#define MDC(bit)		if(bit) iop->pdat |=  CONFIG_SYS_MDC_PIN; \
-				else	iop->pdat &= ~CONFIG_SYS_MDC_PIN
-
-#define MIIDELAY		udelay(1)
-
-#endif /* CONFIG_ETHER_ON_FCC */
-
-#define CONFIG_8260_CLKIN	65536000	/* in Hz */
-#define CONFIG_BAUDRATE		38400
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_IMMAP
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_REGINFO
-
-
-#define CONFIG_BOOTDELAY	5		/* autoboot after 5 seconds	*/
-#define CONFIG_BOOTCOMMAND	"bootm fe010000"	/* autoboot command	*/
-#define CONFIG_BOOTARGS		"root=/dev/ram rw"
-
-#define CONFIG_BZIP2		/* Include support for bzip2 compressed images  */
-#undef	CONFIG_WATCHDOG		/* Disable platform specific watchdog		*/
-
-/*-----------------------------------------------------------------------
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_LONGHELP				/* #undef to save memory	*/
-#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)  /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS		16		/* Max number of command args	*/
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-
-#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on		*/
-#define CONFIG_SYS_MEMTEST_END		0x03B00000	/* 1 ... 59 MB in SDRAM		*/
-
-#define CONFIG_SYS_LOAD_ADDR		0x100000	/* Default load address		*/
-
-#define CONFIG_SYS_RESET_ADDRESS	0x09900000
-
-#define CONFIG_MISC_INIT_R			/* We need misc_init_r()	*/
-
-/*-----------------------------------------------------------------------
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
-
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor   */
-#ifdef CONFIG_BZIP2
-#define CONFIG_SYS_MALLOC_LEN		(4096 << 10)	/* Reserve 4 MB for malloc()    */
-#else
-#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 KB for malloc()  */
-#endif /* CONFIG_BZIP2 */
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_FLASH_BASE		0xFE000000
-#define CONFIG_SYS_FLASH_CFI				/* The flash is CFI compatible  */
-#define CONFIG_FLASH_CFI_DRIVER			/* Use common CFI driver        */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* Max num of memory banks	*/
-#define CONFIG_SYS_MAX_FLASH_SECT	142		/* Max num of sects on one chip */
-
-/* Environment is in flash, there is little space left in Serial EEPROM */
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_SECT_SIZE	0x10000		/* We use one complete sector	*/
-#define CONFIG_ENV_SIZE		(CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
-#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
-
-/*-----------------------------------------------------------------------
- * Hard Reset Configuration Words
- *
- * If you change bits in the HRCW, you must also change the CONFIG_SYS_*
- * defines for the various registers affected by the HRCW e.g. changing
- * HRCW_DPPCxx requires you to also change CONFIG_SYS_SIUMCR.
- */
-/* 0x1686B245 */
-#define CONFIG_SYS_HRCW_MASTER (HRCW_EBM      | HRCW_BPS01       | HRCW_CIP    |\
-			 HRCW_L2CPC10  | HRCW_ISB110                    |\
-			 HRCW_BMS      | HRCW_MMR11       | HRCW_APPC10 |\
-			 HRCW_CS10PC01 | HRCW_MODCK_H0101                \
-			)
-/* No slaves */
-#define CONFIG_SYS_HRCW_SLAVE1 0
-#define CONFIG_SYS_HRCW_SLAVE2 0
-#define CONFIG_SYS_HRCW_SLAVE3 0
-#define CONFIG_SYS_HRCW_SLAVE4 0
-#define CONFIG_SYS_HRCW_SLAVE5 0
-#define CONFIG_SYS_HRCW_SLAVE6 0
-#define CONFIG_SYS_HRCW_SLAVE7 0
-
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR		0xF0F00000
-#ifdef CONFIG_SYS_REV_B
-#define CONFIG_SYS_DEFAULT_IMMR	0xFF000000
-#endif /* CONFIG_SYS_REV_B */
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE	0x4000		/* Size of used area in DPRAM	*/
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC8260 CPU			*/
-
-/*-----------------------------------------------------------------------
- * HIDx - Hardware Implementation-dependent Registers		2-11
- *-----------------------------------------------------------------------
- * HID0 also contains cache control.
- *
- * HID1 has only read-only information - nothing to set.
- */
-#define CONFIG_SYS_HID0_INIT		(HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI|\
-				HID0_IFEM|HID0_ABE)
-#define CONFIG_SYS_HID0_FINAL		(HID0_ICE|HID0_IFEM|HID0_ABE)
-#define CONFIG_SYS_HID2		0
-
-/*-----------------------------------------------------------------------
- * RMR - Reset Mode Register					 5-5
- *-----------------------------------------------------------------------
- * turn on Checkstop Reset Enable
- */
-#define CONFIG_SYS_RMR			RMR_CSRE
-
-/*-----------------------------------------------------------------------
- * BCR - Bus Configuration					 4-25
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_BCR			0xA01C0000
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration				 4-31
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_SIUMCR		0x42250000/* 0x4205C000 */
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control				 4-35
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable
- */
-#if defined (CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR		(SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
-				SYPCR_SWRI|SYPCR_SWP|SYPCR_SWE)
-#else
-#define CONFIG_SYS_SYPCR		(SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
-				SYPCR_SWRI|SYPCR_SWP)
-#endif /* CONFIG_WATCHDOG */
-
-/*-----------------------------------------------------------------------
- * TMCNTSC - Time Counter Status and Control			 4-40
- * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
- * and enable Time Counter
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_TMCNTSC		(TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control		 4-42
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
- * Periodic timer
- */
-#define CONFIG_SYS_PISCR		(PISCR_PS|PISCR_PTF|PISCR_PTE)
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock Control					 9-8
- *-----------------------------------------------------------------------
- * Ensure DFBRG is Divide by 16
- */
-#define CONFIG_SYS_SCCR		SCCR_DFBRG01
-
-/*-----------------------------------------------------------------------
- * RCCR - RISC Controller Configuration				13-7
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_RCCR		0
-
-/*-----------------------------------------------------------------------
- * Init Memory Controller:
- *
- * Bank Bus	Machine PortSize                        Device
- * ---- ---	------- -----------------------------   ------
- *  0	60x	GPCM	 8 bit (Rev.B)/16 bit (Rev.D)   Flash
- *  1	60x	SDRAM	64 bit                          SDRAM
- *  2	Local	SDRAM	32 bit	                        SDRAM
- */
-#define CONFIG_SYS_USE_FIRMWARE	/* If defined - do not initialise memory
-				   controller, rely on initialisation
-				   performed by the Interphase boot firmware.
-				 */
-
-#define CONFIG_SYS_OR0_PRELIM		0xFE000882
-#ifdef CONFIG_SYS_REV_B
-#define CONFIG_SYS_BR0_PRELIM		(CONFIG_SYS_FLASH_BASE | BRx_PS_8  | BRx_V)
-#else  /* Rev. D */
-#define CONFIG_SYS_BR0_PRELIM		(CONFIG_SYS_FLASH_BASE | BRx_PS_16 | BRx_V)
-#endif /* CONFIG_SYS_REV_B */
-
-#define CONFIG_SYS_MPTPR		0x7F00
-
-/* Please note that 60x SDRAM MUST start at 0 */
-#define CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_60x_BR		0x00000041
-#define CONFIG_SYS_60x_OR		0xF0002CD0
-#define CONFIG_SYS_PSDMR		0x0049929A
-#define CONFIG_SYS_PSRT		0x07
-
-#define CONFIG_SYS_LSDRAM_BASE		0xF7000000
-#define CONFIG_SYS_LOC_BR		0x00001861
-#define CONFIG_SYS_LOC_OR		0xFF803280
-#define CONFIG_SYS_LSDMR		0x8285A552
-#define CONFIG_SYS_LSRT		0x07
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/MPC8260ADS.h b/include/configs/MPC8260ADS.h
deleted file mode 100644
index 39f7564..0000000
--- a/include/configs/MPC8260ADS.h
+++ /dev/null
@@ -1,549 +0,0 @@
-/*
- * (C) Copyright 2001
- * Stuart Hughes <stuarth@lineo.com>
- * This file is based on similar values for other boards found in other
- * U-Boot config files, and some that I found in the mpc8260ads manual.
- *
- * Note: my board is a PILOT rev.
- * Note: the mpc8260ads doesn't come with a proper Ethernet MAC address.
- *
- * (C) Copyright 2003-2004 Arabella Software Ltd.
- * Yuli Barcohen <yuli@arabellasw.com>
- * Added support for SDRAM DIMMs SPD EEPROM, MII, JFFS2.
- * Ported to PQ2FADS-ZU and PQ2FADS-VR boards.
- * Ported to MPC8272ADS board.
- *
- * Copyright (c) 2005 MontaVista Software, Inc.
- * Vitaly Bordug <vbordug@ru.mvista.com>
- * Added support for PCI bridge on MPC8272ADS
- *
- * Copyright (C) Freescale Semiconductor, Inc. 2006-2009.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC8260ADS	1	/* Motorola PQ2 ADS family board */
-
-#ifndef CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_TEXT_BASE	0xFFF00000	/* Standard: boot high */
-#endif
-
-#define CONFIG_CPM2		1	/* Has a CPM2 */
-
-/*
- * Figure out if we are booting low via flash HRCW or high via the BCSR.
- */
-#if (CONFIG_SYS_TEXT_BASE != 0xFFF00000)		/* Boot low (flash HRCW) */
-#   define CONFIG_SYS_LOWBOOT		1
-#endif
-
-/* ADS flavours */
-#define CONFIG_SYS_8260ADS		1	/* MPC8260ADS */
-#define CONFIG_SYS_8266ADS		2	/* MPC8266ADS */
-#define CONFIG_SYS_PQ2FADS		3	/* PQ2FADS-ZU or PQ2FADS-VR */
-#define CONFIG_SYS_8272ADS		4	/* MPC8272ADS */
-
-#ifndef CONFIG_ADSTYPE
-#define CONFIG_ADSTYPE		CONFIG_SYS_8260ADS
-#endif /* CONFIG_ADSTYPE */
-
-#if CONFIG_ADSTYPE == CONFIG_SYS_8272ADS
-#define CONFIG_MPC8272		1
-#elif CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS
-/*
- * Actually MPC8275, but the code is littered with ifdefs that
- * apply to both, or which use this ifdef to assume board-specific
- * details. :-(
- */
-#define CONFIG_MPC8272		1
-#endif /* CONFIG_ADSTYPE == CONFIG_SYS_8272ADS */
-
-#define CONFIG_BOARD_EARLY_INIT_F 1	/* Call board_early_init_f	*/
-#define CONFIG_RESET_PHY_R	1	/* Call reset_phy()		*/
-
-/* allow serial and ethaddr to be overwritten */
-#define CONFIG_ENV_OVERWRITE
-
-/*
- * select serial console configuration
- *
- * if either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
- * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
- * for SCC).
- *
- * if CONFIG_CONS_NONE is defined, then the serial console routines must
- * defined elsewhere (for example, on the cogent platform, there are serial
- * ports on the motherboard which are used for the serial console - see
- * cogent/cma101/serial.[ch]).
- */
-#undef	CONFIG_CONS_ON_SMC		/* define if console on SMC */
-#define CONFIG_CONS_ON_SCC		/* define if console on SCC */
-#undef	CONFIG_CONS_NONE		/* define if console on something else */
-#define CONFIG_CONS_INDEX	1	/* which serial channel for console */
-
-/*
- * select ethernet configuration
- *
- * if either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then
- * CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3
- * for FCC)
- *
- * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
- */
-#undef	CONFIG_ETHER_ON_SCC		/* define if ether on SCC   */
-#define CONFIG_ETHER_ON_FCC		/* define if ether on FCC   */
-#undef	CONFIG_ETHER_NONE		/* define if ether on something else */
-
-#ifdef CONFIG_ETHER_ON_FCC
-
-#define CONFIG_ETHER_INDEX	2	/* which SCC/FCC channel for ethernet */
-
-#if   CONFIG_ETHER_INDEX == 1
-
-# define CONFIG_SYS_PHY_ADDR		0
-# define CONFIG_SYS_CMXFCR_VALUE1	(CMXFCR_RF1CS_CLK11 | CMXFCR_TF1CS_CLK10)
-# define CONFIG_SYS_CMXFCR_MASK1	(CMXFCR_FC1 | CMXFCR_RF1CS_MSK | CMXFCR_TF1CS_MSK)
-
-#elif CONFIG_ETHER_INDEX == 2
-
-#if CONFIG_ADSTYPE == CONFIG_SYS_8272ADS	/* RxCLK is CLK15, TxCLK is CLK16 */
-# define CONFIG_SYS_PHY_ADDR		3
-# define CONFIG_SYS_CMXFCR_VALUE2	(CMXFCR_RF2CS_CLK15 | CMXFCR_TF2CS_CLK16)
-#else					/* RxCLK is CLK13, TxCLK is CLK14 */
-# define CONFIG_SYS_PHY_ADDR		0
-# define CONFIG_SYS_CMXFCR_VALUE2	(CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
-#endif /* CONFIG_ADSTYPE == CONFIG_SYS_8272ADS */
-
-# define CONFIG_SYS_CMXFCR_MASK2	(CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
-
-#endif	/* CONFIG_ETHER_INDEX */
-
-#define CONFIG_SYS_CPMFCR_RAMTYPE	0		/* BDs and buffers on 60x bus */
-#define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)  /* Full duplex */
-
-#define CONFIG_MII			/* MII PHY management		*/
-#define CONFIG_BITBANGMII		/* bit-bang MII PHY management	*/
-/*
- * GPIO pins used for bit-banged MII communications
- */
-#define MDIO_PORT	2		/* Port C */
-#define MDIO_DECLARE	volatile ioport_t *iop = ioport_addr ( \
-				(immap_t *) CONFIG_SYS_IMMR, MDIO_PORT )
-#define MDC_DECLARE	MDIO_DECLARE
-
-#if CONFIG_ADSTYPE == CONFIG_SYS_8272ADS
-#define CONFIG_SYS_MDIO_PIN	0x00002000	/* PC18 */
-#define CONFIG_SYS_MDC_PIN	0x00001000	/* PC19 */
-#else
-#define CONFIG_SYS_MDIO_PIN	0x00400000	/* PC9	*/
-#define CONFIG_SYS_MDC_PIN	0x00200000	/* PC10 */
-#endif /* CONFIG_ADSTYPE == CONFIG_SYS_8272ADS */
-
-#define MDIO_ACTIVE	(iop->pdir |=  CONFIG_SYS_MDIO_PIN)
-#define MDIO_TRISTATE	(iop->pdir &= ~CONFIG_SYS_MDIO_PIN)
-#define MDIO_READ	((iop->pdat &  CONFIG_SYS_MDIO_PIN) != 0)
-
-#define MDIO(bit)	if(bit) iop->pdat |=  CONFIG_SYS_MDIO_PIN; \
-			else	iop->pdat &= ~CONFIG_SYS_MDIO_PIN
-
-#define MDC(bit)	if(bit) iop->pdat |=  CONFIG_SYS_MDC_PIN; \
-			else	iop->pdat &= ~CONFIG_SYS_MDC_PIN
-
-#define MIIDELAY	udelay(1)
-
-#endif /* CONFIG_ETHER_ON_FCC */
-
-#if CONFIG_ADSTYPE >= CONFIG_SYS_PQ2FADS
-#undef CONFIG_SPD_EEPROM	/* On new boards, SDRAM is soldered */
-#else
-#define CONFIG_HARD_I2C		1	/* To enable I2C support	*/
-#define CONFIG_SYS_I2C_SPEED		100000	/* I2C speed and slave address	*/
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-
-#if defined(CONFIG_SPD_EEPROM) && !defined(CONFIG_SPD_ADDR)
-#define CONFIG_SPD_ADDR		0x50
-#endif
-#endif /* CONFIG_ADSTYPE >= CONFIG_SYS_PQ2FADS */
-
-/*PCI*/
-#if CONFIG_ADSTYPE >= CONFIG_SYS_PQ2FADS
-#define CONFIG_PCI
-#define CONFIG_PCI_INDIRECT_BRIDGE
-#define CONFIG_PCI_PNP
-#define CONFIG_PCI_BOOTDELAY 0
-#define CONFIG_PCI_SCAN_SHOW
-#endif
-
-#ifndef CONFIG_SDRAM_PBI
-#define CONFIG_SDRAM_PBI	0 /* By default, use bank-based interleaving */
-#endif
-
-#ifndef CONFIG_8260_CLKIN
-#if CONFIG_ADSTYPE >= CONFIG_SYS_PQ2FADS
-#define CONFIG_8260_CLKIN	100000000	/* in Hz */
-#else
-#define CONFIG_8260_CLKIN	66000000	/* in Hz */
-#endif
-#endif
-
-#define CONFIG_BAUDRATE		115200
-
-#define CONFIG_OF_LIBFDT	1
-#define CONFIG_OF_BOARD_SETUP	1
-#if defined(CONFIG_OF_LIBFDT)
-#define OF_TBCLK		(bd->bi_busfreq / 4)
-#endif
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_CDP
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_IMMAP
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_PORTIO
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_SAVES
-#define CONFIG_CMD_SDRAM
-
-#undef CONFIG_CMD_XIMG
-
-#if CONFIG_ADSTYPE == CONFIG_SYS_8272ADS
-    #undef CONFIG_CMD_SDRAM
-    #undef CONFIG_CMD_I2C
-
-#elif CONFIG_ADSTYPE >= CONFIG_SYS_PQ2FADS
-    #undef CONFIG_CMD_SDRAM
-    #undef CONFIG_CMD_I2C
-
-#else
-    #undef CONFIG_CMD_PCI
-
-#endif /* CONFIG_ADSTYPE >= CONFIG_SYS_PQ2FADS */
-
-
-#define CONFIG_BOOTDELAY	5		/* autoboot after 5 seconds */
-#define CONFIG_BOOTCOMMAND	"bootm fff80000"	/* autoboot command */
-#define CONFIG_BOOTARGS		"root=/dev/mtdblock2"
-
-#if defined(CONFIG_CMD_KGDB)
-#undef	CONFIG_KGDB_ON_SMC		/* define if kgdb on SMC */
-#define CONFIG_KGDB_ON_SCC		/* define if kgdb on SCC */
-#undef	CONFIG_KGDB_NONE		/* define if kgdb on something else */
-#define CONFIG_KGDB_INDEX	2	/* which serial channel for kgdb */
-#define CONFIG_KGDB_BAUDRATE	115200	/* speed to run kgdb serial port at */
-#endif
-
-#define CONFIG_BZIP2	/* include support for bzip2 compressed images */
-#undef	CONFIG_WATCHDOG /* disable platform specific watchdog */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_LONGHELP			/* undef to save memory	    */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size  */
-#else
-#define CONFIG_SYS_CBSIZE	256			/* Console I/O Buffer Size  */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS	16			/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-
-#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on */
-#define CONFIG_SYS_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
-
-#define CONFIG_SYS_LOAD_ADDR		0x400000	/* default load address */
-
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
-
-#define CONFIG_SYS_FLASH_BASE		0xff800000
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of memory banks	*/
-#define CONFIG_SYS_MAX_FLASH_SECT	32	/* max num of sects on one chip */
-#define CONFIG_SYS_FLASH_SIZE		8
-#define CONFIG_SYS_FLASH_ERASE_TOUT	8000	/* Timeout for Flash Erase (in ms)    */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	5	/* Timeout for Flash Write (in ms)    */
-#define CONFIG_SYS_FLASH_LOCK_TOUT	5	/* Timeout for Flash Set Lock Bit (in ms) */
-#define CONFIG_SYS_FLASH_UNLOCK_TOUT	10000	/* Timeout for Flash Clear Lock Bits (in ms) */
-#define CONFIG_SYS_FLASH_PROTECTION		/* "Real" (hardware) sectors protection */
-
-/*
- * JFFS2 partitions
- *
- * Note: fake mtd_id used, no linux mtd map file
- */
-#define MTDIDS_DEFAULT		"nor0=mpc8260ads-0"
-#define MTDPARTS_DEFAULT	"mtdparts=mpc8260ads-0:-@1m(jffs2)"
-#define CONFIG_SYS_JFFS2_SORT_FRAGMENTS
-
-/* this is stuff came out of the Motorola docs */
-#ifndef CONFIG_SYS_LOWBOOT
-#define CONFIG_SYS_DEFAULT_IMMR	0x0F010000
-#endif
-
-#define CONFIG_SYS_IMMR		0xF0000000
-#define CONFIG_SYS_BCSR		0xF4500000
-#if CONFIG_ADSTYPE >= CONFIG_SYS_PQ2FADS
-#define CONFIG_SYS_PCI_INT		0xF8200000
-#endif
-#define CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_LSDRAM_BASE		0xFD000000
-
-#define RS232EN_1		0x02000002
-#define RS232EN_2		0x01000001
-#define FETHIEN1		0x08000008
-#define FETH1_RST		0x04000004
-#define FETHIEN2		0x10000000
-#define FETH2_RST		0x08000000
-#define BCSR_PCI_MODE		0x01000000
-
-#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE	0x2000	/* Size of used area in DPRAM	*/
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-#ifdef CONFIG_SYS_LOWBOOT
-/* PQ2FADS flash HRCW = 0x0EB4B645 */
-#define CONFIG_SYS_HRCW_MASTER (   ( HRCW_BPS11 | HRCW_CIP )			    |\
-			    ( HRCW_L2CPC10 | HRCW_DPPC11 | HRCW_ISB100 )    |\
-			    ( HRCW_BMS | HRCW_MMR11 | HRCW_LBPC01 | HRCW_APPC10 ) |\
-			    ( HRCW_CS10PC01 | HRCW_MODCK_H0101 )	     \
-			)
-#else
-/* PQ2FADS BCSR HRCW = 0x0CB23645 */
-#define CONFIG_SYS_HRCW_MASTER (   ( HRCW_BPS11 | HRCW_CIP )			    |\
-			    ( HRCW_L2CPC10 | HRCW_DPPC10 | HRCW_ISB010 )    |\
-			    ( HRCW_BMS | HRCW_APPC10 )			    |\
-			    ( HRCW_MODCK_H0101 )			     \
-			)
-#endif
-/* no slaves */
-#define CONFIG_SYS_HRCW_SLAVE1 0
-#define CONFIG_SYS_HRCW_SLAVE2 0
-#define CONFIG_SYS_HRCW_SLAVE3 0
-#define CONFIG_SYS_HRCW_SLAVE4 0
-#define CONFIG_SYS_HRCW_SLAVE5 0
-#define CONFIG_SYS_HRCW_SLAVE6 0
-#define CONFIG_SYS_HRCW_SLAVE7 0
-
-#define CONFIG_SYS_MONITOR_BASE    CONFIG_SYS_TEXT_BASE
-
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-#   define CONFIG_SYS_RAMBOOT
-#endif
-
-#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
-
-#ifdef CONFIG_BZIP2
-#define CONFIG_SYS_MALLOC_LEN		(4096 << 10)	/* Reserve 4 MB for malloc()	*/
-#else
-#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 KB for malloc()	*/
-#endif /* CONFIG_BZIP2 */
-
-#ifndef CONFIG_SYS_RAMBOOT
-#  define CONFIG_ENV_IS_IN_FLASH	1
-#  define CONFIG_ENV_SECT_SIZE	0x40000
-#  define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + CONFIG_ENV_SECT_SIZE)
-#else
-#  define CONFIG_ENV_IS_IN_NVRAM	1
-#  define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - 0x1000)
-#  define CONFIG_ENV_SIZE		0x200
-#endif /* CONFIG_SYS_RAMBOOT */
-
-#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC8260 CPU */
-#if defined(CONFIG_CMD_KGDB)
-#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
-#endif
-
-#define CONFIG_SYS_HID0_INIT		0
-#define CONFIG_SYS_HID0_FINAL		(HID0_ICE | HID0_IFEM | HID0_ABE )
-
-#define CONFIG_SYS_HID2		0
-
-#define CONFIG_SYS_SYPCR		0xFFFFFFC3
-#define CONFIG_SYS_BCR			0x100C0000
-#define CONFIG_SYS_SIUMCR		0x0A200000
-#define CONFIG_SYS_SCCR		SCCR_DFBRG01
-#define CONFIG_SYS_BR0_PRELIM		(CONFIG_SYS_FLASH_BASE | 0x00001801)
-#define CONFIG_SYS_OR0_PRELIM		0xFF800876
-#define CONFIG_SYS_BR1_PRELIM		(CONFIG_SYS_BCSR | 0x00001801)
-#define CONFIG_SYS_OR1_PRELIM		0xFFFF8010
-
-/*We need to configure chip select to use CPLD PCI IC on MPC8272ADS*/
-
-#if CONFIG_ADSTYPE == CONFIG_SYS_8272ADS
-#define CONFIG_SYS_BR3_PRELIM	(CONFIG_SYS_PCI_INT | 0x1801)	/* PCI interrupt controller */
-#define CONFIG_SYS_OR3_PRELIM	0xFFFF8010
-#elif CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS
-#define CONFIG_SYS_BR8_PRELIM	(CONFIG_SYS_PCI_INT | 0x1801)	/* PCI interrupt controller */
-#define CONFIG_SYS_OR8_PRELIM	0xFFFF8010
-#endif
-
-#define CONFIG_SYS_RMR			RMR_CSRE
-#define CONFIG_SYS_TMCNTSC		(TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
-#define CONFIG_SYS_PISCR		(PISCR_PS|PISCR_PTF|PISCR_PTE)
-#define CONFIG_SYS_RCCR		0
-
-#if (CONFIG_ADSTYPE == CONFIG_SYS_8266ADS) || (CONFIG_ADSTYPE == CONFIG_SYS_8272ADS)
-#undef CONFIG_SYS_LSDRAM_BASE		/* No local bus SDRAM on these boards */
-#endif /* CONFIG_ADSTYPE == CONFIG_SYS_8266ADS */
-
-#if CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS
-#define CONFIG_SYS_OR2			0xFE002EC0
-#define CONFIG_SYS_PSDMR		0x824B36A3
-#define CONFIG_SYS_PSRT		0x13
-#define CONFIG_SYS_LSDMR		0x828737A3
-#define CONFIG_SYS_LSRT		0x13
-#define CONFIG_SYS_MPTPR		0x2800
-#elif CONFIG_ADSTYPE == CONFIG_SYS_8272ADS
-#define CONFIG_SYS_OR2			0xFC002CC0
-#define CONFIG_SYS_PSDMR		0x834E24A3
-#define CONFIG_SYS_PSRT		0x13
-#define CONFIG_SYS_MPTPR		0x2800
-#else
-#define CONFIG_SYS_OR2			0xFF000CA0
-#define CONFIG_SYS_PSDMR		0x016EB452
-#define CONFIG_SYS_PSRT		0x21
-#define CONFIG_SYS_LSDMR		0x0086A522
-#define CONFIG_SYS_LSRT		0x21
-#define CONFIG_SYS_MPTPR		0x1900
-#endif /* CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS */
-
-#define CONFIG_SYS_RESET_ADDRESS	0x04400000
-
-#if CONFIG_ADSTYPE >= CONFIG_SYS_PQ2FADS
-
-/* PCI Memory map (if different from default map */
-#define CONFIG_SYS_PCI_SLV_MEM_LOCAL	CONFIG_SYS_SDRAM_BASE		/* Local base */
-#define CONFIG_SYS_PCI_SLV_MEM_BUS		0x00000000		/* PCI base */
-#define CONFIG_SYS_PICMR0_MASK_ATTRIB	(PICMR_MASK_512MB | PICMR_ENABLE | \
-				 PICMR_PREFETCH_EN)
-
-/*
- * These are the windows that allow the CPU to access PCI address space.
- * All three PCI master windows, which allow the CPU to access PCI
- * prefetch, non prefetch, and IO space (see below), must all fit within
- * these windows.
- */
-
-/*
- * Master window that allows the CPU to access PCI Memory (prefetch).
- * This window will be setup with the second set of Outbound ATU registers
- * in the bridge.
- */
-
-#define CONFIG_SYS_PCI_MSTR_MEM_LOCAL	0x80000000          /* Local base */
-#define CONFIG_SYS_PCI_MSTR_MEM_BUS	0x80000000          /* PCI base   */
-#define	CONFIG_SYS_CPU_PCI_MEM_START	PCI_MSTR_MEM_LOCAL
-#define CONFIG_SYS_PCI_MSTR_MEM_SIZE	0x20000000          /* 512MB */
-#define CONFIG_SYS_POCMR0_MASK_ATTRIB	(POCMR_MASK_512MB | POCMR_ENABLE | POCMR_PREFETCH_EN)
-
-/*
- * Master window that allows the CPU to access PCI Memory (non-prefetch).
- * This window will be setup with the second set of Outbound ATU registers
- * in the bridge.
- */
-
-#define CONFIG_SYS_PCI_MSTR_MEMIO_LOCAL    0xA0000000          /* Local base */
-#define CONFIG_SYS_PCI_MSTR_MEMIO_BUS      0xA0000000          /* PCI base   */
-#define CONFIG_SYS_CPU_PCI_MEMIO_START     PCI_MSTR_MEMIO_LOCAL
-#define CONFIG_SYS_PCI_MSTR_MEMIO_SIZE     0x20000000          /* 512MB */
-#define CONFIG_SYS_POCMR1_MASK_ATTRIB      (POCMR_MASK_512MB | POCMR_ENABLE)
-
-/*
- * Master window that allows the CPU to access PCI IO space.
- * This window will be setup with the first set of Outbound ATU registers
- * in the bridge.
- */
-
-#define CONFIG_SYS_PCI_MSTR_IO_LOCAL       0xF6000000          /* Local base */
-#define CONFIG_SYS_PCI_MSTR_IO_BUS         0x00000000          /* PCI base   */
-#define CONFIG_SYS_CPU_PCI_IO_START        PCI_MSTR_IO_LOCAL
-#define CONFIG_SYS_PCI_MSTR_IO_SIZE        0x02000000          /* 64MB */
-#define CONFIG_SYS_POCMR2_MASK_ATTRIB      (POCMR_MASK_32MB | POCMR_ENABLE | POCMR_PCI_IO)
-
-
-/* PCIBR0 - for PCI IO*/
-#define CONFIG_SYS_PCI_MSTR0_LOCAL		CONFIG_SYS_PCI_MSTR_IO_LOCAL		/* Local base */
-#define CONFIG_SYS_PCIMSK0_MASK		~(CONFIG_SYS_PCI_MSTR_IO_SIZE - 1U)	/* Size of window */
-/* PCIBR1 - prefetch and non-prefetch regions joined together */
-#define CONFIG_SYS_PCI_MSTR1_LOCAL		CONFIG_SYS_PCI_MSTR_MEM_LOCAL
-#define CONFIG_SYS_PCIMSK1_MASK		~(CONFIG_SYS_PCI_MSTR_MEM_SIZE + CONFIG_SYS_PCI_MSTR_MEMIO_SIZE - 1U)
-
-#endif /* CONFIG_ADSTYPE == CONFIG_8272ADS*/
-
-#define CONFIG_HAS_ETH0
-
-#if CONFIG_ADSTYPE == CONFIG_SYS_8272ADS
-#define CONFIG_HAS_ETH1
-#endif
-
-#define CONFIG_NETDEV eth0
-#define CONFIG_LOADADDR 500000 /* default location for tftp and bootm */
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	"netdev=" __stringify(CONFIG_NETDEV) "\0"			\
-	"tftpflash=tftpboot $loadaddr $uboot; "				\
-		"protect off " __stringify(CONFIG_SYS_TEXT_BASE)	\
-			" +$filesize; "	\
-		"erase " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
-		"cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE)	\
-			" $filesize; "	\
-		"protect on " __stringify(CONFIG_SYS_TEXT_BASE)		\
-			" +$filesize; "	\
-		"cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE)	\
-			" $filesize\0"	\
-	"fdtaddr=400000\0"						\
-	"console=ttyCPM0\0"						\
-	"setbootargs=setenv bootargs "					\
-		"root=$rootdev rw console=$console,$baudrate $othbootargs\0" \
-	"setipargs=setenv bootargs nfsroot=$serverip:$rootpath "	 \
-		"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
-		"root=$rootdev rw console=$console,$baudrate $othbootargs\0"
-
-#define CONFIG_NFSBOOTCOMMAND						\
-	"setenv rootdev /dev/nfs;"					\
-	"run setipargs;"						\
-	"tftp $loadaddr $bootfile;"					\
-	"tftp $fdtaddr $fdtfile;"					\
-	"bootm $loadaddr - $fdtaddr"
-
-#define CONFIG_RAMBOOTCOMMAND						\
-	"setenv rootdev /dev/ram;"					\
-	"run setbootargs;"						\
-	"tftp $ramdiskaddr $ramdiskfile;"				\
-	"tftp $loadaddr $bootfile;"					\
-	"tftp $fdtaddr $fdtfile;"					\
-	"bootm $loadaddr $ramdiskaddr $fdtaddr"
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h
index 3dd52ce..98e9072 100644
--- a/include/configs/MPC8315ERDB.h
+++ b/include/configs/MPC8315ERDB.h
@@ -15,14 +15,6 @@
 #define CONFIG_SYS_NAND_U_BOOT_OFFS  16384
 #define CONFIG_SYS_NAND_U_BOOT_RELOC 0x00010000
 
-#ifdef CONFIG_NAND_U_BOOT
-#define CONFIG_SYS_TEXT_BASE	0x00100000 /* CONFIG_SYS_NAND_U_BOOT_DST */
-#define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000
-#ifdef CONFIG_NAND_SPL
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */
-#endif /* CONFIG_NAND_SPL */
-#endif /* CONFIG_NAND_U_BOOT */
-
 #ifndef CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_TEXT_BASE	0xFE000000
 #endif
@@ -93,10 +85,6 @@
  */
 #define CONFIG_SYS_IMMR		0xE0000000
 
-#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
-#define CONFIG_DEFAULT_IMMR	CONFIG_SYS_IMMR
-#endif
-
 /*
  * Arbiter Setup
  */
@@ -281,17 +269,10 @@
 				| OR_FCM_EHTR)
 				/* 0xFFFF8396 */
 
-#ifdef CONFIG_NAND_U_BOOT
-#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM
-#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM
-#define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NOR_BR_PRELIM
-#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NOR_OR_PRELIM
-#else
 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NOR_BR_PRELIM
 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NOR_OR_PRELIM
 #define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM
 #define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM
-#endif
 
 #define CONFIG_SYS_LBLAWBAR1_PRELIM	CONFIG_SYS_NAND_BASE
 #define CONFIG_SYS_LBLAWAR1_PRELIM	(LBLAWAR_EN | LBLAWAR_32KB)
@@ -459,16 +440,7 @@
 /*
  * Environment
  */
-#if defined(CONFIG_NAND_U_BOOT)
-	#define CONFIG_ENV_IS_IN_NAND	1
-	#define CONFIG_ENV_OFFSET		(512 * 1024)
-	#define CONFIG_ENV_SECT_SIZE	CONFIG_SYS_NAND_BLOCK_SIZE
-	#define CONFIG_ENV_SIZE		CONFIG_ENV_SECT_SIZE
-	#define CONFIG_ENV_SIZE_REDUND	CONFIG_ENV_SIZE
-	#define CONFIG_ENV_RANGE	(CONFIG_ENV_SECT_SIZE * 4)
-	#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + \
-						 CONFIG_ENV_RANGE)
-#elif !defined(CONFIG_SYS_RAMBOOT)
+#if !defined(CONFIG_SYS_RAMBOOT)
 	#define CONFIG_ENV_IS_IN_FLASH	1
 	#define CONFIG_ENV_ADDR		\
 			(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
@@ -503,7 +475,7 @@
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_PCI
 
-#if defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_NAND_U_BOOT)
+#if defined(CONFIG_SYS_RAMBOOT)
     #undef CONFIG_CMD_SAVEENV
     #undef CONFIG_CMD_LOADS
 #endif
diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h
index 72f5fde..2722164 100644
--- a/include/configs/MPC8536DS.h
+++ b/include/configs/MPC8536DS.h
@@ -19,18 +19,6 @@
 #define CONFIG_PHYS_64BIT	1
 #endif
 
-#ifdef CONFIG_NAND
-#define CONFIG_NAND_U_BOOT		1
-#define CONFIG_RAMBOOT_NAND		1
-#ifdef CONFIG_NAND_SPL
-#define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */
-#else
-#define CONFIG_SYS_LDSCRIPT $(CPUDIR)/u-boot-nand.lds
-#define CONFIG_SYS_TEXT_BASE	0xf8f82000
-#endif /* CONFIG_NAND_SPL */
-#endif
-
 #ifdef CONFIG_SDCARD
 #define CONFIG_RAMBOOT_SDCARD		1
 #define CONFIG_SYS_TEXT_BASE	0xf8f40000
@@ -222,8 +210,7 @@
 #define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
 #define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
 
-#if defined(CONFIG_RAMBOOT_NAND) || defined(CONFIG_RAMBOOT_SDCARD) || \
-    defined(CONFIG_RAMBOOT_SPIFLASH)
+#if defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH)
 #define CONFIG_SYS_RAMBOOT
 #define CONFIG_SYS_EXTRA_ENV_RELOC
 #else
@@ -352,17 +339,10 @@
 		| OR_FCM_TRLX \
 		| OR_FCM_EHTR)
 
-#ifdef CONFIG_RAMBOOT_NAND
-#define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
-#define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
-#define CONFIG_SYS_BR2_PRELIM  CONFIG_FLASH_BR_PRELIM	/* NOR Base Address */
-#define CONFIG_SYS_OR2_PRELIM  CONFIG_FLASH_OR_PRELIM	/* NOR Options */
-#else
 #define CONFIG_SYS_BR0_PRELIM  CONFIG_FLASH_BR_PRELIM	/* NOR Base Address */
 #define CONFIG_SYS_OR0_PRELIM  CONFIG_FLASH_OR_PRELIM	/* NOR Options */
 #define CONFIG_SYS_BR2_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 #define CONFIG_SYS_OR2_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
-#endif
 
 #define CONFIG_SYS_BR4_PRELIM \
 		(BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0x40000) \
@@ -625,12 +605,7 @@
  */
 
 #if defined(CONFIG_SYS_RAMBOOT)
-#if defined(CONFIG_RAMBOOT_NAND)
-#define CONFIG_ENV_IS_IN_NAND	1
-#define CONFIG_ENV_SIZE		CONFIG_SYS_NAND_BLOCK_SIZE
-#define CONFIG_ENV_OFFSET ((768 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE)
-#define CONFIG_ENV_RANGE	(3 * CONFIG_ENV_SIZE)
-#elif defined(CONFIG_RAMBOOT_SPIFLASH)
+#if defined(CONFIG_RAMBOOT_SPIFLASH)
 #define CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_ENV_SPI_BUS	0
 #define CONFIG_ENV_SPI_CS	0
diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h
index 5165a45..4da247c 100644
--- a/include/configs/MPC8569MDS.h
+++ b/include/configs/MPC8569MDS.h
@@ -49,18 +49,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_L2_CACHE				/* toggle L2 cache	*/
 #define CONFIG_BTB				/* toggle branch predition */
 
-#ifdef CONFIG_NAND
-#define CONFIG_NAND_U_BOOT		1
-#define CONFIG_RAMBOOT_NAND		1
-#ifdef CONFIG_NAND_SPL
-#define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */
-#else
-#define CONFIG_SYS_LDSCRIPT $(CPUDIR)/u-boot-nand.lds
-#define CONFIG_SYS_TEXT_BASE	0xf8f82000
-#endif
-#endif
-
 #ifndef CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_TEXT_BASE	0xfff80000
 #endif
@@ -180,12 +168,7 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
 #define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
 
-#if defined(CONFIG_RAMBOOT_NAND)
-#define CONFIG_SYS_RAMBOOT
-#define CONFIG_SYS_EXTRA_ENV_RELOC
-#else
 #undef CONFIG_SYS_RAMBOOT
-#endif
 
 #define CONFIG_FLASH_CFI_DRIVER
 #define CONFIG_SYS_FLASH_CFI
@@ -228,17 +211,10 @@ extern unsigned long get_clock_freq(void);
 				| OR_FCM_TRLX \
 				| OR_FCM_EHTR)
 
-#ifdef CONFIG_RAMBOOT_NAND
-#define CONFIG_SYS_BR0_PRELIM	CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
-#define CONFIG_SYS_OR0_PRELIM	CONFIG_SYS_NAND_OR_PRELIM/* NAND Options */
-#define CONFIG_SYS_BR3_PRELIM	CONFIG_FLASH_BR_PRELIM	/* NOR Base Address */
-#define CONFIG_SYS_OR3_PRELIM	CONFIG_FLASH_OR_PRELIM	/* NOR Options */
-#else
 #define CONFIG_SYS_BR0_PRELIM	CONFIG_FLASH_BR_PRELIM	/* NOR Base Address */
 #define CONFIG_SYS_OR0_PRELIM	CONFIG_FLASH_OR_PRELIM	/* NOR Options */
 #define CONFIG_SYS_BR3_PRELIM	CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 #define CONFIG_SYS_OR3_PRELIM	CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
-#endif
 
 #define CONFIG_SYS_LBC_LCRR	0x00000004	/* LB clock ratio reg */
 #define CONFIG_SYS_LBC_LBCR	0x00040000	/* LB config reg */
@@ -476,11 +452,6 @@ extern unsigned long get_clock_freq(void);
  * Environment
  */
 #if defined(CONFIG_SYS_RAMBOOT)
-#if defined(CONFIG_RAMBOOT_NAND)
-#define CONFIG_ENV_IS_IN_NAND	1
-#define CONFIG_ENV_SIZE		CONFIG_SYS_NAND_BLOCK_SIZE
-#define CONFIG_ENV_OFFSET	((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE)
-#endif
 #else
 #define CONFIG_ENV_IS_IN_FLASH	1
 #define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h
index 48ae9d4..0b07876 100644
--- a/include/configs/MPC8572DS.h
+++ b/include/configs/MPC8572DS.h
@@ -20,18 +20,6 @@
 #define CONFIG_PHYS_64BIT
 #endif
 
-#ifdef CONFIG_NAND
-#define CONFIG_NAND_U_BOOT
-#define CONFIG_RAMBOOT_NAND
-#ifdef CONFIG_NAND_SPL
-#define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */
-#else
-#define CONFIG_SYS_LDSCRIPT $(CPUDIR)/u-boot-nand.lds
-#define CONFIG_SYS_TEXT_BASE	0xf8f82000
-#endif /* CONFIG_NAND_SPL */
-#endif
-
 #ifndef CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_TEXT_BASE	0xeff40000
 #endif
@@ -208,12 +196,7 @@
 #define CONFIG_SYS_FLASH_ERASE_TOUT	60000		/* Flash Erase Timeout (ms) */
 #define CONFIG_SYS_FLASH_WRITE_TOUT	500		/* Flash Write Timeout (ms) */
 
-#if defined(CONFIG_RAMBOOT_NAND)
-#define CONFIG_SYS_RAMBOOT
-#define CONFIG_SYS_EXTRA_ENV_RELOC
-#else
 #undef CONFIG_SYS_RAMBOOT
-#endif
 
 #define CONFIG_FLASH_CFI_DRIVER
 #define CONFIG_SYS_FLASH_CFI
@@ -353,17 +336,10 @@
 			       | OR_FCM_TRLX \
 			       | OR_FCM_EHTR)
 
-#ifdef CONFIG_RAMBOOT_NAND
-#define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
-#define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
-#define CONFIG_SYS_BR2_PRELIM  CONFIG_FLASH_BR_PRELIM	/* NOR Base Address */
-#define CONFIG_SYS_OR2_PRELIM  CONFIG_FLASH_OR_PRELIM	/* NOR Options */
-#else
 #define CONFIG_SYS_BR0_PRELIM  CONFIG_FLASH_BR_PRELIM	/* NOR Base Address */
 #define CONFIG_SYS_OR0_PRELIM  CONFIG_FLASH_OR_PRELIM	/* NOR Options */
 #define CONFIG_SYS_BR2_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 #define CONFIG_SYS_OR2_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
-#endif
 #define CONFIG_SYS_BR4_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0x40000) \
 			       | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 			       | BR_PS_8	       /* Port Size = 8 bit */ \
@@ -600,12 +576,6 @@
  */
 
 #if defined(CONFIG_SYS_RAMBOOT)
-#if defined(CONFIG_RAMBOOT_NAND)
-#define CONFIG_ENV_IS_IN_NAND	1
-#define CONFIG_ENV_SIZE	CONFIG_SYS_NAND_BLOCK_SIZE
-#define CONFIG_ENV_OFFSET	((512 * 1024)\
-				+ CONFIG_SYS_NAND_BLOCK_SIZE)
-#endif
 
 #else
 	#define CONFIG_ENV_IS_IN_FLASH	1
diff --git a/include/configs/MPC86xADS.h b/include/configs/MPC86xADS.h
deleted file mode 100644
index beada7e..0000000
--- a/include/configs/MPC86xADS.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
-  * A collection of structures, addresses, and values associated with
-  * the Motorola MPC8xxADS board.  Copied from the FADS config.
-  *
-  * Copyright (c) 1998 Dan Malek (dmalek@jlc.net)
-  *
-  * Modified by, Yuli Barcohen, Arabella Software Ltd., yuli@arabellasw.com
-  *
-  * Values common to all FADS family boards are in board/fads/fads.h
-  */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-/* board type */
-#define CONFIG_MPC86xADS        1       /* new ADS */
-#define CONFIG_FADS		1       /* We are FADS compatible (more or less) */
-
-/* CPU type - pick one of these */
-#define CONFIG_MPC866T		1
-#undef CONFIG_MPC866P
-#undef CONFIG_MPC859T
-#undef CONFIG_MPC859DSL
-#undef CONFIG_MPC852T
-
-#define	CONFIG_SYS_TEXT_BASE	0xFE000000
-
-#define	CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		*/
-#undef	CONFIG_8xx_CONS_SMC2
-#undef	CONFIG_8xx_CONS_NONE
-#define CONFIG_BAUDRATE		38400
-
-#define CONFIG_8xx_OSCLK		10000000 /* 10MHz oscillator on EXTCLK  */
-#define CONFIG_8xx_CPUCLK_DEFAULT	50000000
-#define CONFIG_SYS_8xx_CPUCLK_MIN		40000000
-#define CONFIG_SYS_8xx_CPUCLK_MAX		80000000
-
-#define CONFIG_DRAM_50MHZ       1
-#define CONFIG_SDRAM_50MHZ      1
-
-#include "../../board/fads/fads.h"
-
-#define CONFIG_SYS_OR5_PRELIM		0xFFFF8110	/* 64Kbyte address space */
-#define CONFIG_SYS_BR5_PRELIM		(CONFIG_SYS_PHYDEV_ADDR | BR_PS_8 | BR_V)
-
-#endif	/* __CONFIG_H */
diff --git a/include/configs/MPC885ADS.h b/include/configs/MPC885ADS.h
deleted file mode 100644
index eeb2355..0000000
--- a/include/configs/MPC885ADS.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * A collection of structures, addresses, and values associated with
- * the Motorola MPC885ADS board. Values common to all FADS family boards
- * are in board/fads/fads.h
- *
- * Copyright (C) 2003-2004 Arabella Software Ltd.
- * Yuli Barcohen <yuli@arabellasw.com>
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_MPC885ADS	1	/* MPC885ADS board */
-#define CONFIG_FADS		1	/* We are FADS compatible (more or less) */
-
-#define CONFIG_MPC885		1	/* MPC885 CPU (Duet family) */
-
-#define	CONFIG_SYS_TEXT_BASE	0xFE000000
-
-#define	CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1 */
-#undef	CONFIG_8xx_CONS_SMC2
-#undef	CONFIG_8xx_CONS_NONE
-#define CONFIG_BAUDRATE		38400
-
-#define CONFIG_8xx_OSCLK		10000000 /* 10 MHz oscillator on EXTCLK  */
-#define CONFIG_8xx_CPUCLK_DEFAULT	50000000
-#define CONFIG_SYS_8xx_CPUCLK_MIN		40000000
-#define CONFIG_SYS_8xx_CPUCLK_MAX		133000000
-
-#define CONFIG_SDRAM_50MHZ      1
-
-#include "../../board/fads/fads.h"
-
-#define CONFIG_SYS_OR5_PRELIM		0xFFFF8110	/* 64Kbyte address space */
-#define CONFIG_SYS_BR5_PRELIM		(CONFIG_SYS_PHYDEV_ADDR | BR_PS_8 | BR_V)
-
-#define CONFIG_HAS_ETH1
-
-#endif	/* __CONFIG_H */
diff --git a/include/configs/NETPHONE.h b/include/configs/NETPHONE.h
deleted file mode 100644
index 08cfc9e..0000000
--- a/include/configs/NETPHONE.h
+++ /dev/null
@@ -1,701 +0,0 @@
-/*
- * (C) Copyright 2000-2010
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * Pantelis Antoniou, Intracom S.A., panto@intracom.gr
- * U-Boot port on NetTA4 board
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#if !defined(CONFIG_NETPHONE_VERSION) || CONFIG_NETPHONE_VERSION > 2
-#error Unsupported CONFIG_NETPHONE version
-#endif
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC870		1	/* This is a MPC885 CPU		*/
-#define CONFIG_NETPHONE		1	/* ...on a NetPhone board	*/
-
-#define	CONFIG_SYS_TEXT_BASE	0x40000000
-
-#define	CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		*/
-#undef	CONFIG_8xx_CONS_SMC2
-#undef	CONFIG_8xx_CONS_NONE
-
-#define CONFIG_BAUDRATE		115200	/* console baudrate = 115kbps	*/
-
-/* #define CONFIG_XIN		 10000000 */
-#define CONFIG_XIN		 50000000
-/* #define MPC8XX_HZ		120000000 */
-#define MPC8XX_HZ		 66666666
-
-#define CONFIG_8xx_GCLK_FREQ	MPC8XX_HZ
-
-#if 0
-#define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
-#else
-#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
-#endif
-
-#undef	CONFIG_CLOCKS_IN_MHZ	/* clocks NOT passsed to Linux in MHz */
-
-#define CONFIG_PREBOOT	"echo;"
-
-#undef	CONFIG_BOOTARGS
-#define CONFIG_BOOTCOMMAND							\
-	"tftpboot; "								\
-	"setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} "	\
-	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;"	\
-	"bootm"
-
-#define CONFIG_SOURCE
-#define CONFIG_LOADS_ECHO	0	/* echo off for serial download	*/
-#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
-
-#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
-
-#undef	CONFIG_CAN_DRIVER		/* CAN Driver support disabled	*/
-
-#define	CONFIG_STATUS_LED	1	/* Status LED enabled		*/
-#define CONFIG_BOARD_SPECIFIC_LED	/* version has board specific leds */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_NISDOMAIN
-
-#undef CONFIG_MAC_PARTITION
-#undef CONFIG_DOS_PARTITION
-
-#define	CONFIG_RTC_MPC8xx		/* use internal RTC of MPC8xx	*/
-
-#define	FEC_ENET		1	/* eth.c needs it that way... */
-#undef CONFIG_SYS_DISCOVER_PHY
-#define CONFIG_MII		1
-#define CONFIG_MII_INIT		1
-#define CONFIG_RMII		1	/* use RMII interface */
-
-#define CONFIG_ETHER_ON_FEC1	1
-#define CONFIG_FEC1_PHY		8	/* phy address of FEC */
-#define CONFIG_FEC1_PHY_NORXERR 1
-
-#define CONFIG_ETHER_ON_FEC2	1
-#define CONFIG_FEC2_PHY		4
-#define CONFIG_FEC2_PHY_NORXERR 1
-
-#define CONFIG_ENV_OVERWRITE	1	/* allow modification of vendor params */
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_CDP
-
-
-#define CONFIG_BOARD_EARLY_INIT_F	1
-#define CONFIG_MISC_INIT_R
-
-/*
- * Miscellaneous configurable options
- */
-#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
-
-#define CONFIG_SYS_HUSH_PARSER	1
-
-#if defined(CONFIG_CMD_KGDB)
-#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
-#else
-#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
-#endif
-#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-
-#define CONFIG_SYS_MEMTEST_START	0x0300000	/* memtest works on	*/
-#define CONFIG_SYS_MEMTEST_END		0x0700000	/* 3 ... 7 MB in DRAM	*/
-
-#define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR		0xFF000000
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
-#define	CONFIG_SYS_INIT_RAM_SIZE	0x3000	/* Size of used area in DPRAM	*/
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define	CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_FLASH_BASE		0x40000000
-#if defined(DEBUG)
-#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#else
-#define	CONFIG_SYS_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
-#endif
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
-#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
-#if CONFIG_NETPHONE_VERSION == 2
-#define CONFIG_SYS_FLASH_BASE4		0x40080000
-#endif
-
-#define CONFIG_SYS_RESET_ADDRESS   0x80000000
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#if CONFIG_NETPHONE_VERSION == 1
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#elif CONFIG_NETPHONE_VERSION == 2
-#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#endif
-#define CONFIG_SYS_MAX_FLASH_SECT	8	/* max number of sectors on one chip	*/
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
-
-#define	CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_SECT_SIZE	0x10000
-
-#define	CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x60000)
-#define	CONFIG_ENV_SIZE		0x4000
-
-#define CONFIG_ENV_ADDR_REDUND	(CONFIG_SYS_FLASH_BASE + 0x70000)
-#define CONFIG_ENV_SIZE_REDUND	CONFIG_ENV_SIZE
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
-#endif
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control				11-9
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
- */
-#if defined(CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
-			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
-#else
-#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
-#endif
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration				11-6
- *-----------------------------------------------------------------------
- * PCMCIA config., multi-function pin tri-state
- */
-#ifndef	CONFIG_CAN_DRIVER
-#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC)
-#else	/* we must activate GPL5 in the SIUMCR for CAN */
-#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC)
-#endif	/* CONFIG_CAN_DRIVER */
-
-/*-----------------------------------------------------------------------
- * TBSCR - Time Base Status and Control				11-26
- *-----------------------------------------------------------------------
- * Clear Reference Interrupt Status, Timebase freezing enabled
- */
-#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
-
-/*-----------------------------------------------------------------------
- * RTCSC - Real-Time Clock Status and Control Register		11-27
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control		11-31
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
- */
-#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
-
-/*-----------------------------------------------------------------------
- * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
- *-----------------------------------------------------------------------
- * Reset PLL lock status sticky bit, timer expired status bit and timer
- * interrupt status bit
- *
- */
-
-#if CONFIG_XIN == 10000000
-
-#if MPC8XX_HZ == 120000000
-#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
-			 (0 << PLPRCR_S_SHIFT) | (12 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
-			 PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 100000000
-#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
-			 (0 << PLPRCR_S_SHIFT) | (10 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
-			 PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 50000000
-#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
-			 (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (3 << PLPRCR_PDF_SHIFT) | \
-			 PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 25000000
-#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
-			 (2 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (3 << PLPRCR_PDF_SHIFT) | \
-			 PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 40000000
-#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
-			 (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \
-			 PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 75000000
-#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
-			 (1 << PLPRCR_S_SHIFT) | (15 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
-			 PLPRCR_TEXPS)
-#else
-#error unsupported CPU freq for XIN = 10MHz
-#endif
-
-#elif CONFIG_XIN == 50000000
-
-#if MPC8XX_HZ == 120000000
-#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
-			 (0 << PLPRCR_S_SHIFT) | (12 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \
-			 PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 100000000
-#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
-			 (0 << PLPRCR_S_SHIFT) | (6 << PLPRCR_MFI_SHIFT) | (2 << PLPRCR_PDF_SHIFT) | \
-			 PLPRCR_TEXPS)
-#elif MPC8XX_HZ ==  66666666
-#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
-			 (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (2 << PLPRCR_PDF_SHIFT) | \
-			 PLPRCR_TEXPS)
-#else
-#error unsupported CPU freq for XIN = 50MHz
-#endif
-
-#else
-
-#error unsupported XIN freq
-#endif
-
-
-/*
- *-----------------------------------------------------------------------
- * SCCR - System Clock and reset Control Register		15-27
- *-----------------------------------------------------------------------
- * Set clock output, timebase and RTC source and divider,
- * power management and some other internal clocks
- *
- * Note: When TBS == 0 the timebase is independent of current cpu clock.
- */
-
-#define SCCR_MASK	SCCR_EBDF11
-#if MPC8XX_HZ > 66666666
-#define CONFIG_SYS_SCCR	(/* SCCR_TBS	| */ SCCR_CRQEN | \
-			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
-			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
-			 SCCR_DFALCD00 | SCCR_EBDF01)
-#else
-#define CONFIG_SYS_SCCR	(/* SCCR_TBS	| */ SCCR_CRQEN | \
-			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
-			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
-			 SCCR_DFALCD00)
-#endif
-
-/*-----------------------------------------------------------------------
- *
- *-----------------------------------------------------------------------
- *
- */
-/*#define	CONFIG_SYS_DER	0x2002000F*/
-#define CONFIG_SYS_DER	0
-
-/*
- * Init Memory Controller:
- *
- * BR0/1 and OR0/1 (FLASH)
- */
-
-#define FLASH_BASE0_PRELIM	0x40000000	/* FLASH bank #0	*/
-
-/* used to re-map FLASH both when starting from SRAM or FLASH:
- * restrict access enough to keep SRAM working (if any)
- * but not too much to meddle with FLASH accesses
- */
-#define CONFIG_SYS_REMAP_OR_AM		0x80000000	/* OR addr mask */
-#define CONFIG_SYS_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
-
-/* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1	*/
-#define CONFIG_SYS_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_BI | OR_SCY_5_CLK | OR_TRLX)
-
-#define CONFIG_SYS_OR0_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V )
-
-#if CONFIG_NETPHONE_VERSION == 2
-
-#define FLASH_BASE4_PRELIM	0x40080000	/* FLASH bank #1	*/
-
-#define CONFIG_SYS_OR4_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_OR4_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_BR4_PRELIM	((FLASH_BASE4_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V )
-
-#endif
-
-/*
- * BR3 and OR3 (SDRAM)
- *
- */
-#define SDRAM_BASE3_PRELIM	0x00000000	/* SDRAM bank #0	*/
-#define	SDRAM_MAX_SIZE		(256 << 20)	/* max 256MB per bank	*/
-
-/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
-#define CONFIG_SYS_OR_TIMING_SDRAM	(OR_CSNT_SAM | OR_G5LS)
-
-#define CONFIG_SYS_OR3_PRELIM	((0xFFFFFFFFLU & ~(SDRAM_MAX_SIZE - 1)) | CONFIG_SYS_OR_TIMING_SDRAM)
-#define CONFIG_SYS_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMB | BR_PS_32 | BR_V)
-
-/*
- * Memory Periodic Timer Prescaler
- */
-
-/*
- * Memory Periodic Timer Prescaler
- *
- * The Divider for PTA (refresh timer) configuration is based on an
- * example SDRAM configuration (64 MBit, one bank). The adjustment to
- * the number of chip selects (NCS) and the actually needed refresh
- * rate is done by setting MPTPR.
- *
- * PTA is calculated from
- *	PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS)
- *
- *	gclk	  CPU clock (not bus clock!)
- *	Trefresh  Refresh cycle * 4 (four word bursts used)
- *
- * 4096  Rows from SDRAM example configuration
- * 1000  factor s -> ms
- *   32  PTP (pre-divider from MPTPR) from SDRAM example configuration
- *    4  Number of refresh cycles per period
- *   64  Refresh cycle in ms per number of rows
- * --------------------------------------------
- * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000
- *
- * 50 MHz => 50.000.000 / Divider =  98
- * 66 Mhz => 66.000.000 / Divider = 129
- * 80 Mhz => 80.000.000 / Divider = 156
- */
-
-#define CONFIG_SYS_MAMR_PTA		 234
-
-/*
- * For 16 MBit, refresh rates could be 31.3 us
- * (= 64 ms / 2K = 125 / quad bursts).
- * For a simpler initialization, 15.6 us is used instead.
- *
- * #define CONFIG_SYS_MPTPR_2BK_2K	MPTPR_PTP_DIV32		for 2 banks
- * #define CONFIG_SYS_MPTPR_1BK_2K	MPTPR_PTP_DIV64		for 1 bank
- */
-#define CONFIG_SYS_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
-#define CONFIG_SYS_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
-
-/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
-#define CONFIG_SYS_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
-#define CONFIG_SYS_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
-
-/*
- * MAMR settings for SDRAM
- */
-
-/* 8 column SDRAM */
-#define CONFIG_SYS_MAMR_8COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
-			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
-			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
-
-/* 9 column SDRAM */
-#define CONFIG_SYS_MAMR_9COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
-			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
-			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
-
-#define CONFIG_LAST_STAGE_INIT		/* needed to reset the damn phys */
-
-/****************************************************************/
-
-#define DSP_SIZE	0x00010000	/* 64K */
-#define NAND_SIZE	0x00010000	/* 64K */
-
-#define DSP_BASE	0xF1000000
-#define NAND_BASE	0xF1010000
-
-/*****************************************************************************/
-
-#define CONFIG_SYS_DIRECT_FLASH_TFTP
-
-/*****************************************************************************/
-
-#if CONFIG_NETPHONE_VERSION == 1
-#define STATUS_LED_BIT		0x00000008		/* bit 28 */
-#elif CONFIG_NETPHONE_VERSION == 2
-#define STATUS_LED_BIT		0x00000080		/* bit 24 */
-#endif
-
-#define STATUS_LED_PERIOD	(CONFIG_SYS_HZ / 2)
-#define STATUS_LED_STATE	STATUS_LED_BLINKING
-
-#define STATUS_LED_ACTIVE	0		/* LED on for bit == 0	*/
-#define STATUS_LED_BOOT		0		/* LED 0 used for boot status */
-
-#ifndef __ASSEMBLY__
-
-/* LEDs */
-
-/* led_id_t is unsigned int mask */
-typedef unsigned int led_id_t;
-
-#define __led_toggle(_msk) \
-	do { \
-		((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat ^= (_msk); \
-	} while(0)
-
-#define __led_set(_msk, _st) \
-	do { \
-		if ((_st)) \
-			((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat |= (_msk); \
-		else \
-			((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat &= ~(_msk); \
-	} while(0)
-
-#define __led_init(msk, st) __led_set(msk, st)
-
-#endif
-
-/***********************************************************************************************************
-
- ----------------------------------------------------------------------------------------------
-
-   (V1) version 1 of the board
-   (V2) version 2 of the board
-
- ----------------------------------------------------------------------------------------------
-
-   Pin definitions:
-
- +------+----------------+--------+------------------------------------------------------------
- |  #   | Name           | Type   | Comment
- +------+----------------+--------+------------------------------------------------------------
- | PA3  | SPIEN_MAX      | Output | MAX serial to uart chip select
- | PA7  | DSP_INT        | Output | DSP interrupt
- | PA10 | DSP_RESET      | Output | DSP reset
- | PA14 | USBOE          | Output | USB (1)
- | PA15 | USBRXD         | Output | USB (1)
- | PB19 | BT_RTS         | Output | Bluetooth (0)
- | PB23 | BT_CTS         | Output | Bluetooth (0)
- | PB26 | SPIEN_SEP      | Output | Serial EEPROM chip select
- | PB27 | SPICS_DISP     | Output | Display chip select
- | PB28 | SPI_RXD_3V     | Input  | SPI Data Rx
- | PB29 | SPI_TXD        | Output | SPI Data Tx
- | PB30 | SPI_CLK        | Output | SPI Clock
- | PC10 | DISPA0         | Output | Display A0
- | PC11 | BACKLIGHT      | Output | Display backlit
- | PC12 | SPI2RXD        | Input  | (V1) 2nd SPI RXD
- |      | IO_RESET       | Output | (V2) General I/O reset
- | PC13 | SPI2TXD        | Output | (V1) 2nd SPI TXD (V1)
- |      | HOOK           | Input  | (V2) Hook input interrupt
- | PC15 | SPI2CLK        | Output | (V1) 2nd SPI CLK
- |      | F_RY_BY        | Input  | (V2) NAND F_RY_BY
- | PE17 | F_ALE          | Output | NAND F_ALE
- | PE18 | F_CLE          | Output | NAND F_CLE
- | PE20 | F_CE           | Output | NAND F_CE
- | PE24 | SPICS_SCOUT    | Output | (V1) Codec chip select
- |      | LED            | Output | (V2) LED
- | PE27 | SPICS_ER       | Output | External serial register CS
- | PE28 | LEDIO1         | Output | (V1) LED
- |      | BKBR1          | Input  | (V2) Keyboard input scan
- | PE29 | LEDIO2         | Output | (V1) LED hook for A (TA2)
- |      | BKBR2          | Input  | (V2) Keyboard input scan
- | PE30 | LEDIO3         | Output | (V1) LED hook for A (TA2)
- |      | BKBR3          | Input  | (V2) Keyboard input scan
- | PE31 | F_RY_BY        | Input  | (V1) NAND F_RY_BY
- |      | BKBR4          | Input  | (V2) Keyboard input scan
- +------+----------------+--------+---------------------------------------------------
-
- ----------------------------------------------------------------------------------------------
-
-   Serial register input:
-
- +------+----------------+------------------------------------------------------------
- |  #   | Name           | Comment
- +------+----------------+------------------------------------------------------------
- |    0 | BKBR1          | (V1) Keyboard input scan
- |    1 | BKBR3          | (V1) Keyboard input scan
- |    2 | BKBR4          | (V1) Keyboard input scan
- |    3 | BKBR2          | (V1) Keyboard input scan
- |    4 | HOOK           | (V1) Hook switch
- |    5 | BT_LINK        | (V1) Bluetooth link status
- |    6 | HOST_WAKE      | (V1) Bluetooth host wake up
- |    7 | OK_ETH         | (V1) Cisco inline power OK status
- +------+----------------+------------------------------------------------------------
-
- ----------------------------------------------------------------------------------------------
-
-   Serial register output:
-
- +------+----------------+------------------------------------------------------------
- |  #   | Name           | Comment
- +------+----------------+------------------------------------------------------------
- |    0 | KEY1           | Keyboard output scan
- |    1 | KEY2           | Keyboard output scan
- |    2 | KEY3           | Keyboard output scan
- |    3 | KEY4           | Keyboard output scan
- |    4 | KEY5           | Keyboard output scan
- |    5 | KEY6           | Keyboard output scan
- |    6 | KEY7           | Keyboard output scan
- |    7 | BT_WAKE        | Bluetooth wake up
- +------+----------------+------------------------------------------------------------
-
- ----------------------------------------------------------------------------------------------
-
- Chip selects:
-
- +------+----------------+------------------------------------------------------------
- |  #   | Name           | Comment
- +------+----------------+------------------------------------------------------------
- | CS0  | CS0            | Boot flash
- | CS1  | CS_FLASH       | NAND flash
- | CS2  | CS_DSP         | DSP
- | CS3  | DCS_DRAM       | DRAM
- | CS4  | CS_FLASH2      | (V2) 2nd flash
- +------+----------------+------------------------------------------------------------
-
- ----------------------------------------------------------------------------------------------
-
- Interrupts:
-
- +------+----------------+------------------------------------------------------------
- |  #   | Name           | Comment
- +------+----------------+------------------------------------------------------------
- | IRQ1 | IRQ_DSP        | DSP interrupt
- | IRQ3 | S_INTER        | DUSLIC ???
- | IRQ4 | F_RY_BY        | NAND
- | IRQ7 | IRQ_MAX        | MAX 3100 interrupt
- +------+----------------+------------------------------------------------------------
-
- ----------------------------------------------------------------------------------------------
-
- Interrupts on PCMCIA pins:
-
- +------+----------------+------------------------------------------------------------
- |  #   | Name           | Comment
- +------+----------------+------------------------------------------------------------
- | IP_A0| PHY1_LINK      | Link status changed for #1 Ethernet interface
- | IP_A1| PHY2_LINK      | Link status changed for #2 Ethernet interface
- | IP_A2| RMII1_MDINT    | PHY interrupt for #1
- | IP_A3| RMII2_MDINT    | PHY interrupt for #2
- | IP_A5| HOST_WAKE      | (V2) Bluetooth host wake
- | IP_A6| OK_ETH         | (V2) Cisco inline power OK
- +------+----------------+------------------------------------------------------------
-
-*************************************************************************************************/
-
-#define CONFIG_SED156X			1	/* use SED156X */
-#define CONFIG_SED156X_PG12864Q		1	/* type of display used */
-
-/* serial interfacing macros */
-
-#define SED156X_SPI_RXD_PORT	(((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat)
-#define SED156X_SPI_RXD_MASK	0x00000008
-
-#define SED156X_SPI_TXD_PORT	(((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat)
-#define SED156X_SPI_TXD_MASK	0x00000004
-
-#define SED156X_SPI_CLK_PORT	(((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat)
-#define SED156X_SPI_CLK_MASK	0x00000002
-
-#define SED156X_CS_PORT		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat)
-#define SED156X_CS_MASK		0x00000010
-
-#define SED156X_A0_PORT		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat)
-#define SED156X_A0_MASK		0x0020
-
-/*************************************************************************************************/
-
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV		1
-#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE	1
-#define CONFIG_SYS_CONSOLE_ENV_OVERWRITE	1
-
-/*************************************************************************************************/
-
-/* use board specific hardware */
-#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
-#define CONFIG_HW_WATCHDOG
-#define CONFIG_SHOW_ACTIVITY
-
-/*************************************************************************************************/
-
-/* phone console configuration */
-
-#define PHONE_CONSOLE_POLL_HZ		(CONFIG_SYS_HZ/200)	/* poll every 5ms */
-
-/*************************************************************************************************/
-
-#define CONFIG_CDP_DEVICE_ID		20
-#define CONFIG_CDP_DEVICE_ID_PREFIX	"NP"	/* netphone */
-#define CONFIG_CDP_PORT_ID		"eth%d"
-#define CONFIG_CDP_CAPABILITIES		0x00000010
-#define CONFIG_CDP_VERSION		"u-boot" " " U_BOOT_DATE " " U_BOOT_TIME
-#define CONFIG_CDP_PLATFORM		"Intracom NetPhone"
-#define CONFIG_CDP_TRIGGER		0x20020001
-#define CONFIG_CDP_POWER_CONSUMPTION	4300	/* 90 mA @ 48V */
-#define CONFIG_CDP_APPLIANCE_VLAN_TYPE	0x01	/* ipphone */
-
-/*************************************************************************************************/
-
-#define CONFIG_AUTO_COMPLETE	1
-
-/*************************************************************************************************/
-
-#define CONFIG_CRC32_VERIFY	1
-
-/*************************************************************************************************/
-
-#define CONFIG_HUSH_OLD_PARSER_COMPATIBLE	1
-
-/*************************************************************************************************/
-#endif	/* __CONFIG_H */
diff --git a/include/configs/NETTA.h b/include/configs/NETTA.h
deleted file mode 100644
index 800a922..0000000
--- a/include/configs/NETTA.h
+++ /dev/null
@@ -1,666 +0,0 @@
-/*
- * (C) Copyright 2000-2010
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * Pantelis Antoniou, Intracom S.A., panto@intracom.gr
- * U-Boot port on NetTA4 board
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC885		1	/* This is a MPC885 CPU		*/
-#define CONFIG_NETTA		1	/* ...on a NetTA board		*/
-
-#define	CONFIG_SYS_TEXT_BASE	0x40000000
-
-#define	CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		*/
-#undef	CONFIG_8xx_CONS_SMC2
-#undef	CONFIG_8xx_CONS_NONE
-
-#define CONFIG_BAUDRATE		115200	/* console baudrate = 115kbps	*/
-
-/* #define CONFIG_XIN		 10000000 */
-#define CONFIG_XIN		 50000000
-#define MPC8XX_HZ		120000000
-/* #define MPC8XX_HZ		100000000 */
-/* #define MPC8XX_HZ		 50000000 */
-/* #define MPC8XX_HZ		 80000000 */
-
-#define CONFIG_8xx_GCLK_FREQ	MPC8XX_HZ
-
-#if 0
-#define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
-#else
-#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
-#endif
-
-#undef	CONFIG_CLOCKS_IN_MHZ	/* clocks NOT passsed to Linux in MHz */
-
-#define CONFIG_PREBOOT	"echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo"
-
-#undef	CONFIG_BOOTARGS
-#define CONFIG_BOOTCOMMAND							\
-	"tftpboot; "								\
-	"setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} "	\
-	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;"	\
-	"bootm"
-
-#define CONFIG_LOADS_ECHO	0	/* echo off for serial download	*/
-#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
-
-#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
-#define CONFIG_HW_WATCHDOG
-
-#undef	CONFIG_CAN_DRIVER		/* CAN Driver support disabled	*/
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_NISDOMAIN
-
-
-#undef CONFIG_MAC_PARTITION
-#undef CONFIG_DOS_PARTITION
-
-#define	CONFIG_RTC_MPC8xx		/* use internal RTC of MPC8xx	*/
-
-#define	FEC_ENET		1	/* eth.c needs it that way... */
-#undef  CONFIG_SYS_DISCOVER_PHY		/* do not discover phys */
-#define CONFIG_MII		1
-#define CONFIG_MII_INIT		1
-#define CONFIG_RMII		1	/* use RMII interface */
-
-#if defined(CONFIG_NETTA_ISDN)
-#define CONFIG_ETHER_ON_FEC1	1
-#define CONFIG_FEC1_PHY		1	/* phy address of FEC1 */
-#define CONFIG_FEC1_PHY_NORXERR 1
-#undef  CONFIG_ETHER_ON_FEC2
-#else
-#define CONFIG_ETHER_ON_FEC1	1
-#define CONFIG_FEC1_PHY		8	/* phy address of FEC1 */
-#define CONFIG_FEC1_PHY_NORXERR 1
-#define CONFIG_ETHER_ON_FEC2	1
-#define CONFIG_FEC2_PHY		1	/* phy address of FEC2 */
-#define CONFIG_FEC2_PHY_NORXERR 1
-#endif
-
-#define CONFIG_ENV_OVERWRITE	1	/* allow modification of vendor params */
-
-/* POST support */
-#define CONFIG_POST		(CONFIG_SYS_POST_MEMORY   | \
-				 CONFIG_SYS_POST_CODEC	   | \
-				 CONFIG_SYS_POST_DSP	   )
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_CDP
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_IDE
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_PCMCIA
-#define CONFIG_CMD_PING
-
-
-#define CONFIG_BOARD_EARLY_INIT_F	1
-#define CONFIG_MISC_INIT_R
-
-/*
- * Miscellaneous configurable options
- */
-#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
-
-#define CONFIG_SYS_HUSH_PARSER	1
-
-#if defined(CONFIG_CMD_KGDB)
-#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
-#else
-#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
-#endif
-#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-
-#define CONFIG_SYS_MEMTEST_START	0x0300000	/* memtest works on	*/
-#define CONFIG_SYS_MEMTEST_END		0x0700000	/* 3 ... 7 MB in DRAM	*/
-
-#define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR		0xFF000000
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
-#define	CONFIG_SYS_INIT_RAM_SIZE	0x3000	/* Size of used area in DPRAM	*/
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define	CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_FLASH_BASE		0x40000000
-#if defined(DEBUG)
-#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#else
-#define	CONFIG_SYS_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
-#endif
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
-#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CONFIG_SYS_MAX_FLASH_SECT	8	/* max number of sectors on one chip	*/
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
-
-#define	CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_SECT_SIZE	0x10000
-
-#define	CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x60000)
-#define	CONFIG_ENV_SIZE		0x4000
-
-#define CONFIG_ENV_ADDR_REDUND	(CONFIG_SYS_FLASH_BASE + 0x70000)
-#define CONFIG_ENV_SIZE_REDUND	CONFIG_ENV_SIZE
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
-#endif
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control				11-9
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
- */
-#if defined(CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
-			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
-#else
-#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
-#endif
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration				11-6
- *-----------------------------------------------------------------------
- * PCMCIA config., multi-function pin tri-state
- */
-#ifndef	CONFIG_CAN_DRIVER
-#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC)
-#else	/* we must activate GPL5 in the SIUMCR for CAN */
-#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC)
-#endif	/* CONFIG_CAN_DRIVER */
-
-/*-----------------------------------------------------------------------
- * TBSCR - Time Base Status and Control				11-26
- *-----------------------------------------------------------------------
- * Clear Reference Interrupt Status, Timebase freezing enabled
- */
-#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
-
-/*-----------------------------------------------------------------------
- * RTCSC - Real-Time Clock Status and Control Register		11-27
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control		11-31
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
- */
-#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
-
-/*-----------------------------------------------------------------------
- * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
- *-----------------------------------------------------------------------
- * Reset PLL lock status sticky bit, timer expired status bit and timer
- * interrupt status bit
- *
- */
-
-#if CONFIG_XIN == 10000000
-
-#if MPC8XX_HZ == 120000000
-#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
-			 (0 << PLPRCR_S_SHIFT) | (12 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
-			 PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 100000000
-#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
-			 (0 << PLPRCR_S_SHIFT) | (10 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
-			 PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 50000000
-#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
-			 (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (3 << PLPRCR_PDF_SHIFT) | \
-			 PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 25000000
-#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
-			 (2 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (3 << PLPRCR_PDF_SHIFT) | \
-			 PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 40000000
-#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
-			 (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \
-			 PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 75000000
-#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
-			 (1 << PLPRCR_S_SHIFT) | (15 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
-			 PLPRCR_TEXPS)
-#else
-#error unsupported CPU freq for XIN = 10MHz
-#endif
-
-#elif CONFIG_XIN == 50000000
-
-#if MPC8XX_HZ == 120000000
-#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
-			 (0 << PLPRCR_S_SHIFT) | (12 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \
-			 PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 100000000
-#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
-			 (0 << PLPRCR_S_SHIFT) | (6 << PLPRCR_MFI_SHIFT) | (2 << PLPRCR_PDF_SHIFT) | \
-			 PLPRCR_TEXPS)
-#elif MPC8XX_HZ ==  80000000
-#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
-			 (0 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \
-			 PLPRCR_TEXPS)
-#elif MPC8XX_HZ ==  50000000
-#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
-			 (1 << PLPRCR_S_SHIFT) | (6 << PLPRCR_MFI_SHIFT) | (2 << PLPRCR_PDF_SHIFT) | \
-			 PLPRCR_TEXPS)
-#else
-#error unsupported CPU freq for XIN = 50MHz
-#endif
-
-#else
-
-#error unsupported XIN freq
-#endif
-
-
-/*
- *-----------------------------------------------------------------------
- * SCCR - System Clock and reset Control Register		15-27
- *-----------------------------------------------------------------------
- * Set clock output, timebase and RTC source and divider,
- * power management and some other internal clocks
- *
- * Note: When TBS == 0 the timebase is independent of current cpu clock.
- */
-
-#define SCCR_MASK	SCCR_EBDF11
-#if MPC8XX_HZ > 66666666
-#define CONFIG_SYS_SCCR	(/* SCCR_TBS	| */ SCCR_CRQEN | \
-			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
-			 SCCR_DFNL111 | SCCR_DFNH000  | SCCR_DFLCD000 | \
-			 SCCR_DFALCD00 | SCCR_EBDF01)
-#else
-#define CONFIG_SYS_SCCR	(/* SCCR_TBS	| */ SCCR_CRQEN | \
-			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
-			 SCCR_DFNL111 | SCCR_DFNH000  | SCCR_DFLCD000 | \
-			 SCCR_DFALCD00)
-#endif
-
-/*-----------------------------------------------------------------------
- *
- *-----------------------------------------------------------------------
- *
- */
-/*#define	CONFIG_SYS_DER	0x2002000F*/
-#define CONFIG_SYS_DER	0
-
-/*
- * Init Memory Controller:
- *
- * BR0/1 and OR0/1 (FLASH)
- */
-
-#define FLASH_BASE0_PRELIM	0x40000000	/* FLASH bank #0	*/
-
-/* used to re-map FLASH both when starting from SRAM or FLASH:
- * restrict access enough to keep SRAM working (if any)
- * but not too much to meddle with FLASH accesses
- */
-#define CONFIG_SYS_REMAP_OR_AM		0x80000000	/* OR addr mask */
-#define CONFIG_SYS_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
-
-/* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1	*/
-#define CONFIG_SYS_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_BI | OR_SCY_5_CLK | OR_TRLX)
-
-#define CONFIG_SYS_OR0_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V )
-
-/*
- * BR3 and OR3 (SDRAM)
- *
- */
-#define SDRAM_BASE3_PRELIM	0x00000000	/* SDRAM bank #0	*/
-#define	SDRAM_MAX_SIZE		(256 << 20)	/* max 256MB per bank	*/
-
-/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
-#define CONFIG_SYS_OR_TIMING_SDRAM	(OR_CSNT_SAM | OR_G5LS)
-
-#define CONFIG_SYS_OR3_PRELIM	((0xFFFFFFFFLU & ~(SDRAM_MAX_SIZE - 1)) | CONFIG_SYS_OR_TIMING_SDRAM)
-#define CONFIG_SYS_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMB | BR_PS_32 | BR_V)
-
-/*
- * Memory Periodic Timer Prescaler
- */
-
-/*
- * Memory Periodic Timer Prescaler
- *
- * The Divider for PTA (refresh timer) configuration is based on an
- * example SDRAM configuration (64 MBit, one bank). The adjustment to
- * the number of chip selects (NCS) and the actually needed refresh
- * rate is done by setting MPTPR.
- *
- * PTA is calculated from
- *	PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS)
- *
- *	gclk	  CPU clock (not bus clock!)
- *	Trefresh  Refresh cycle * 4 (four word bursts used)
- *
- * 4096  Rows from SDRAM example configuration
- * 1000  factor s -> ms
- *   32  PTP (pre-divider from MPTPR) from SDRAM example configuration
- *    4  Number of refresh cycles per period
- *   64  Refresh cycle in ms per number of rows
- * --------------------------------------------
- * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000
- *
- * 50 MHz => 50.000.000 / Divider =  98
- * 66 Mhz => 66.000.000 / Divider = 129
- * 80 Mhz => 80.000.000 / Divider = 156
- */
-
-#if   MPC8XX_HZ == 120000000
-#define CONFIG_SYS_MAMR_PTA		 234
-#elif MPC8XX_HZ == 100000000
-#define CONFIG_SYS_MAMR_PTA		 195
-#elif MPC8XX_HZ ==  80000000
-#define CONFIG_SYS_MAMR_PTA		 156
-#elif MPC8XX_HZ ==  50000000
-#define CONFIG_SYS_MAMR_PTA		  98
-#else
-#error Unknown frequency
-#endif
-
-
-/*
- * For 16 MBit, refresh rates could be 31.3 us
- * (= 64 ms / 2K = 125 / quad bursts).
- * For a simpler initialization, 15.6 us is used instead.
- *
- * #define CONFIG_SYS_MPTPR_2BK_2K	MPTPR_PTP_DIV32		for 2 banks
- * #define CONFIG_SYS_MPTPR_1BK_2K	MPTPR_PTP_DIV64		for 1 bank
- */
-#define CONFIG_SYS_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
-#define CONFIG_SYS_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
-
-/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
-#define CONFIG_SYS_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
-#define CONFIG_SYS_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
-
-/*
- * MAMR settings for SDRAM
- */
-
-/* 8 column SDRAM */
-#define CONFIG_SYS_MAMR_8COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
-			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
-			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
-
-/* 9 column SDRAM */
-#define CONFIG_SYS_MAMR_9COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
-			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
-			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
-
-#define CONFIG_LAST_STAGE_INIT		/* needed to reset the damn phys */
-
-/***********************************************************************************************************
-
-   Pin definitions:
-
- +------+----------------+--------+------------------------------------------------------------
- |  #   | Name           | Type   | Comment
- +------+----------------+--------+------------------------------------------------------------
- | PA3  | OK_ETH_3V      | Input  | CISCO Ethernet power OK
- |      |                |        | (NetRoute: FEC1, TA: FEC2) (0=power OK)
- | PA6  | P_VCCD1        | Output | TPS2211A PCMCIA
- | PA7  | DCL1_3V        | Periph | IDL1 PCM clock
- | PA8  | DSP_DR1        | Periph | IDL1 PCM Data Rx
- | PA9  | L1TXDA         | Periph | IDL1 PCM Data Tx
- | PA10 | P_VCCD0        | Output | TPS2211A PCMCIA
- | PA12 | P_SHDN         | Output | TPS2211A PCMCIA
- | PA13 | ETH_LOOP       | Output | CISCO Loopback remote power
- |      |                |        | (NetRoute: FEC1, TA: FEC2) (1=NORMAL)
- | PA14 | P_VPPD0        | Output | TPS2211A PCMCIA
- | PA15 | P_VPPD1        | Output | TPS2211A PCMCIA
- | PB14 | SPIEN_FXO      | Output | SPI CS for FXO daughter-board
- | PB15 | SPIEN_S1       | Output | SPI CS for S-interface 1 (NetRoute only)
- | PB16 | DREQ1          | Output | D channel request for S-interface chip 1.
- | PB17 | L1ST3          | Periph | IDL1 timeslot enable signal for PPC
- | PB18 | L1ST2          | Periph | IDL1 timeslot enable signal for PPC
- | PB19 | SPIEN_S2       | Output | SPI CS for S-interface 2 (NetRoute only)
- | PB20 | SPIEN_SEEPROM  | Output | SPI CS for serial eeprom
- | PB21 | LEDIO          | Output | Led mode indication for PHY
- | PB22 | UART_CTS       | Input  | UART CTS
- | PB23 | UART_RTS       | Output | UART RTS
- | PB24 | UART_RX        | Periph | UART Data Rx
- | PB25 | UART_TX        | Periph | UART Data Tx
- | PB26 | RMII-MDC       | Periph | Free for future use (MII mgt clock)
- | PB27 | RMII-MDIO      | Periph | Free for future use (MII mgt data)
- | PB28 | SPI_RXD_3V     | Input  | SPI Data Rx
- | PB29 | SPI_TXD        | Output | SPI Data Tx
- | PB30 | SPI_CLK        | Output | SPI Clock
- | PB31 | RMII1-REFCLK   | Periph | RMII reference clock for FEC1
- | PC4  | PHY1_LINK      | Input  | PHY link state FEC1 (interrupt)
- | PC5  | PHY2_LINK      | Input  | PHY link state FEC2 (interrupt)
- | PC6  | RMII1-MDINT    | Input  | PHY prog interrupt FEC1 (interrupt)
- | PC7  | RMII2-MDINT    | Input  | PHY prog interrupt FEC1 (interrupt)
- | PC8  | P_OC           | Input  | TPS2211A PCMCIA overcurrent (interrupt) (1=OK)
- | PC9  | COM_HOOK1      | Input  | Codec interrupt chip #1 (interrupt)
- | PC10 | COM_HOOK2      | Input  | Codec interrupt chip #2 (interrupt)
- | PC11 | COM_HOOK4      | Input  | Codec interrupt chip #4 (interrupt)
- | PC12 | COM_HOOK3      | Input  | Codec interrupt chip #3 (interrupt)
- | PC13 | F_RY_BY        | Input  | NAND ready signal (interrupt)
- | PC14 | FAN_OK         | Input  | Fan status signal (interrupt) (1=OK)
- | PC15 | PC15_DIRECT0   | Periph | PCMCIA DMA request.
- | PD3  | F_ALE          | Output | NAND
- | PD4  | F_CLE          | Output | NAND
- | PD5  | F_CE           | Output | NAND
- | PD6  | DSP_INT        | Output | DSP debug interrupt
- | PD7  | DSP_RESET      | Output | DSP reset
- | PD8  | RMII_MDC       | Periph | MII mgt clock
- | PD9  | SPIEN_C1       | Output | SPI CS for codec #1
- | PD10 | SPIEN_C2       | Output | SPI CS for codec #2
- | PD11 | SPIEN_C3       | Output | SPI CS for codec #3
- | PD12 | FSC2           | Periph | IDL2 frame sync
- | PD13 | DGRANT2        | Input  | D channel grant from S #2
- | PD14 | SPIEN_C4       | Output | SPI CS for codec #4
- | PD15 | TP700          | Output | Testpoint for software debugging
- | PE14 | RMII2-TXD0     | Periph | FEC2 transmit data
- | PE15 | RMII2-TXD1     | Periph | FEC2 transmit data
- | PE16 | RMII2-REFCLK   | Periph | TA: RMII ref clock for
- |      | DCL2           | Periph | NetRoute: PCM clock #2
- | PE17 | TP703          | Output | Testpoint for software debugging
- | PE18 | DGRANT1        | Input  |  D channel grant from S #1
- | PE19 | RMII2-TXEN     | Periph | TA: FEC2 tx enable
- |      | PCM2OUT        | Periph | NetRoute: Tx data for IDL2
- | PE20 | FSC1           | Periph | IDL1 frame sync
- | PE21 | RMII2-RXD0     | Periph | FEC2 receive data
- | PE22 | RMII2-RXD1     | Periph | FEC2 receive data
- | PE23 | L1ST1          | Periph | IDL1 timeslot enable signal for PPC
- | PE24 | U-N1           | Output | Select user/network for S #1 (0=user)
- | PE25 | U-N2           | Output | Select user/network for S #2 (0=user)
- | PE26 | RMII2-RXDV     | Periph | FEC2 valid
- | PE27 | DREQ2          | Output | D channel request for S #2.
- | PE28 | FPGA_DONE      | Input  | FPGA done signal
- | PE29 | FPGA_INIT      | Output | FPGA init signal
- | PE30 | UDOUT2_3V      | Input  | IDL2 PCM input
- | PE31 |                |        | Free
- +------+----------------+--------+---------------------------------------------------
-
- Chip selects:
-
- +------+----------------+------------------------------------------------------------
- |  #   | Name           | Comment
- +------+----------------+------------------------------------------------------------
- | CS0  | CS0            | Boot flash
- | CS1  | CS_FLASH       | NAND flash
- | CS2  | CS_DSP         | DSP
- | CS3  | DCS_DRAM       | DRAM
- | CS4  | CS_ER1         | External output register
- +------+----------------+------------------------------------------------------------
-
- Interrupts:
-
- +------+----------------+------------------------------------------------------------
- |  #   | Name           | Comment
- +------+----------------+------------------------------------------------------------
- | IRQ1 | UINTER_3V      | S interrupt chips interrupt (common)
- | IRQ3 | IRQ_DSP        | DSP interrupt
- | IRQ4 | IRQ_DSP1       | Extra DSP interrupt
- +------+----------------+------------------------------------------------------------
-
-*************************************************************************************************/
-
-#define DSP_SIZE	0x00010000	/* 64K */
-#define NAND_SIZE	0x00010000	/* 64K */
-#define ER_SIZE		0x00010000	/* 64K */
-#define DUMMY_SIZE	0x00010000	/* 64K */
-
-#define DSP_BASE	0xF1000000
-#define NAND_BASE	0xF1010000
-#define ER_BASE		0xF1020000
-#define DUMMY_BASE	0xF1FF0000
-
-/*****************************************************************************/
-
-#define CONFIG_SYS_DIRECT_FLASH_TFTP
-#define CONFIG_SYS_DIRECT_NAND_TFTP
-
-/*****************************************************************************/
-
-#if 1
-/*-----------------------------------------------------------------------
- * PCMCIA stuff
- *-----------------------------------------------------------------------
- */
-
-#define CONFIG_SYS_PCMCIA_MEM_ADDR	(0xE0000000)
-#define CONFIG_SYS_PCMCIA_MEM_SIZE	( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_DMA_ADDR	(0xE4000000)
-#define CONFIG_SYS_PCMCIA_DMA_SIZE	( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_ATTRB_ADDR	(0xE8000000)
-#define CONFIG_SYS_PCMCIA_ATTRB_SIZE	( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_IO_ADDR	(0xEC000000)
-#define CONFIG_SYS_PCMCIA_IO_SIZE	( 64 << 20 )
-
-/*-----------------------------------------------------------------------
- * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
- *-----------------------------------------------------------------------
- */
-
-#define CONFIG_IDE_PREINIT	1	/* Use preinit IDE hook */
-#define	CONFIG_IDE_8xx_PCCARD	1	/* Use IDE with PC Card	Adapter	*/
-
-#undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE    not supported	*/
-#undef	CONFIG_IDE_LED			/* LED   for ide not supported	*/
-#undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
-
-#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
-
-#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
-
-#define CONFIG_SYS_ATA_BASE_ADDR	CONFIG_SYS_PCMCIA_MEM_ADDR
-
-/* Offset for data I/O			*/
-#define CONFIG_SYS_ATA_DATA_OFFSET	(CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
-
-/* Offset for normal register accesses	*/
-#define CONFIG_SYS_ATA_REG_OFFSET	(2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
-
-/* Offset for alternate registers	*/
-#define CONFIG_SYS_ATA_ALT_OFFSET	0x0100
-
-#define CONFIG_MAC_PARTITION
-#define CONFIG_DOS_PARTITION
-#endif
-
-/*************************************************************************************************/
-
-#define CONFIG_CDP_DEVICE_ID		20
-#define CONFIG_CDP_DEVICE_ID_PREFIX	"NT"	/* netta */
-#define CONFIG_CDP_PORT_ID		"eth%d"
-#define CONFIG_CDP_CAPABILITIES		0x00000010
-#define CONFIG_CDP_VERSION		"u-boot 1.0" " " U_BOOT_DATE " " U_BOOT_TIME
-#define CONFIG_CDP_PLATFORM		"Intracom NetTA"
-#define CONFIG_CDP_TRIGGER		0x20020001
-#define CONFIG_CDP_POWER_CONSUMPTION	4300	/* 90 mA @ 48V */
-#define CONFIG_CDP_APPLIANCE_VLAN_TYPE	0x01	/* ipphone? */
-
-/*************************************************************************************************/
-
-#define CONFIG_AUTO_COMPLETE	1
-
-/*************************************************************************************************/
-
-#define CONFIG_CRC32_VERIFY	1
-
-/*************************************************************************************************/
-
-#define CONFIG_HUSH_OLD_PARSER_COMPATIBLE	1
-
-/*************************************************************************************************/
-
-#endif	/* __CONFIG_H */
diff --git a/include/configs/NETTA2.h b/include/configs/NETTA2.h
deleted file mode 100644
index 55ae4b5..0000000
--- a/include/configs/NETTA2.h
+++ /dev/null
@@ -1,654 +0,0 @@
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * Pantelis Antoniou, Intracom S.A., panto@intracom.gr
- * U-Boot port on NetTA4 board
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#if !defined(CONFIG_NETTA2_VERSION) || CONFIG_NETTA2_VERSION > 2
-#error Unsupported CONFIG_NETTA2 version
-#endif
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC870		1	/* This is a MPC885 CPU		*/
-#define CONFIG_NETTA2		1	/* ...on a NetTA2 board		*/
-
-#define	CONFIG_SYS_TEXT_BASE	0x40000000
-
-#define	CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		*/
-#undef	CONFIG_8xx_CONS_SMC2
-#undef	CONFIG_8xx_CONS_NONE
-
-#define CONFIG_BAUDRATE		115200	/* console baudrate = 115kbps	*/
-
-/* #define CONFIG_XIN		 10000000 */
-#define CONFIG_XIN		 50000000
-/* #define MPC8XX_HZ		120000000 */
-#define MPC8XX_HZ		 66666666
-
-#define CONFIG_8xx_GCLK_FREQ	MPC8XX_HZ
-
-#if 0
-#define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
-#else
-#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
-#endif
-
-#undef	CONFIG_CLOCKS_IN_MHZ	/* clocks NOT passsed to Linux in MHz */
-
-#define CONFIG_PREBOOT	"echo;"
-
-#undef	CONFIG_BOOTARGS
-#define CONFIG_BOOTCOMMAND							\
-	"tftpboot; "								\
-	"setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} "	\
-	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; "	\
-	"bootm"
-
-#define CONFIG_SOURCE
-#define CONFIG_LOADS_ECHO	0	/* echo off for serial download	*/
-#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
-
-#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
-
-#undef	CONFIG_CAN_DRIVER		/* CAN Driver support disabled	*/
-
-#define	CONFIG_STATUS_LED	1	/* Status LED enabled		*/
-#define CONFIG_BOARD_SPECIFIC_LED	/* version has board specific leds */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_NISDOMAIN
-
-
-#undef CONFIG_MAC_PARTITION
-#undef CONFIG_DOS_PARTITION
-
-#define	CONFIG_RTC_MPC8xx		/* use internal RTC of MPC8xx	*/
-
-#define	FEC_ENET		1	/* eth.c needs it that way... */
-#undef CONFIG_SYS_DISCOVER_PHY
-#define CONFIG_MII		1
-#define CONFIG_MII_INIT		1
-#define CONFIG_RMII		1	/* use RMII interface */
-
-#define CONFIG_ETHER_ON_FEC1	1
-#define CONFIG_FEC1_PHY		8	/* phy address of FEC */
-#define CONFIG_FEC1_PHY_NORXERR 1
-
-#define CONFIG_ETHER_ON_FEC2	1
-#define CONFIG_FEC2_PHY		4
-#define CONFIG_FEC2_PHY_NORXERR 1
-
-#define CONFIG_ENV_OVERWRITE	1	/* allow modification of vendor params */
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_CDP
-
-
-#define CONFIG_BOARD_EARLY_INIT_F	1
-#define CONFIG_MISC_INIT_R
-
-/*
- * Miscellaneous configurable options
- */
-#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
-
-#define CONFIG_SYS_HUSH_PARSER	1
-
-#if defined(CONFIG_CMD_KGDB)
-#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
-#else
-#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
-#endif
-#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-
-#define CONFIG_SYS_MEMTEST_START	0x0300000	/* memtest works on	*/
-#define CONFIG_SYS_MEMTEST_END		0x0700000	/* 3 ... 7 MB in DRAM	*/
-
-#define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR		0xFF000000
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
-#define	CONFIG_SYS_INIT_RAM_SIZE	0x3000	/* Size of used area in DPRAM	*/
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define	CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_FLASH_BASE		0x40000000
-#if defined(DEBUG)
-#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#else
-#define	CONFIG_SYS_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
-#endif
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
-#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
-#if CONFIG_NETTA2_VERSION == 2
-#define CONFIG_SYS_FLASH_BASE4		0x40080000
-#endif
-
-#define CONFIG_SYS_RESET_ADDRESS   0x80000000
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#if CONFIG_NETTA2_VERSION == 1
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#elif CONFIG_NETTA2_VERSION == 2
-#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#endif
-#define CONFIG_SYS_MAX_FLASH_SECT	8	/* max number of sectors on one chip	*/
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
-
-#define	CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_SECT_SIZE	0x10000
-
-#define	CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x60000)
-#define CONFIG_ENV_OFFSET		0
-#define	CONFIG_ENV_SIZE		0x4000
-
-#define CONFIG_ENV_ADDR_REDUND	(CONFIG_SYS_FLASH_BASE + 0x70000)
-#define CONFIG_ENV_OFFSET_REDUND	0
-#define CONFIG_ENV_SIZE_REDUND	CONFIG_ENV_SIZE
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
-#endif
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control				11-9
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
- */
-#if defined(CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
-			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
-#else
-#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
-#endif
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration				11-6
- *-----------------------------------------------------------------------
- * PCMCIA config., multi-function pin tri-state
- */
-#ifndef	CONFIG_CAN_DRIVER
-#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC)
-#else	/* we must activate GPL5 in the SIUMCR for CAN */
-#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC)
-#endif	/* CONFIG_CAN_DRIVER */
-
-/*-----------------------------------------------------------------------
- * TBSCR - Time Base Status and Control				11-26
- *-----------------------------------------------------------------------
- * Clear Reference Interrupt Status, Timebase freezing enabled
- */
-#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
-
-/*-----------------------------------------------------------------------
- * RTCSC - Real-Time Clock Status and Control Register		11-27
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control		11-31
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
- */
-#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
-
-/*-----------------------------------------------------------------------
- * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
- *-----------------------------------------------------------------------
- * Reset PLL lock status sticky bit, timer expired status bit and timer
- * interrupt status bit
- *
- */
-
-#if CONFIG_XIN == 10000000
-
-#if MPC8XX_HZ == 120000000
-#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
-			 (0 << PLPRCR_S_SHIFT) | (12 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
-			 PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 100000000
-#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
-			 (0 << PLPRCR_S_SHIFT) | (10 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
-			 PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 50000000
-#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
-			 (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (3 << PLPRCR_PDF_SHIFT) | \
-			 PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 25000000
-#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
-			 (2 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (3 << PLPRCR_PDF_SHIFT) | \
-			 PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 40000000
-#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
-			 (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \
-			 PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 75000000
-#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
-			 (1 << PLPRCR_S_SHIFT) | (15 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
-			 PLPRCR_TEXPS)
-#else
-#error unsupported CPU freq for XIN = 10MHz
-#endif
-
-#elif CONFIG_XIN == 50000000
-
-#if MPC8XX_HZ == 120000000
-#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
-			 (0 << PLPRCR_S_SHIFT) | (12 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \
-			 PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 100000000
-#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
-			 (0 << PLPRCR_S_SHIFT) | (6 << PLPRCR_MFI_SHIFT) | (2 << PLPRCR_PDF_SHIFT) | \
-			 PLPRCR_TEXPS)
-#elif MPC8XX_HZ ==  66666666
-#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
-			 (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (2 << PLPRCR_PDF_SHIFT) | \
-			 PLPRCR_TEXPS)
-#else
-#error unsupported CPU freq for XIN = 50MHz
-#endif
-
-#else
-
-#error unsupported XIN freq
-#endif
-
-
-/*
- *-----------------------------------------------------------------------
- * SCCR - System Clock and reset Control Register		15-27
- *-----------------------------------------------------------------------
- * Set clock output, timebase and RTC source and divider,
- * power management and some other internal clocks
- *
- * Note: When TBS == 0 the timebase is independent of current cpu clock.
- */
-
-#define SCCR_MASK	SCCR_EBDF11
-#if MPC8XX_HZ > 66666666
-#define CONFIG_SYS_SCCR	(/* SCCR_TBS     | */ SCCR_CRQEN | \
-			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
-			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
-			 SCCR_DFALCD00 | SCCR_EBDF01)
-#else
-#define CONFIG_SYS_SCCR	(/* SCCR_TBS     | */ SCCR_CRQEN | \
-			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
-			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
-			 SCCR_DFALCD00)
-#endif
-
-/*-----------------------------------------------------------------------
- *
- *-----------------------------------------------------------------------
- *
- */
-/*#define	CONFIG_SYS_DER	0x2002000F*/
-#define CONFIG_SYS_DER	0
-
-/*
- * Init Memory Controller:
- *
- * BR0/1 and OR0/1 (FLASH)
- */
-
-#define FLASH_BASE0_PRELIM	0x40000000	/* FLASH bank #0	*/
-
-/* used to re-map FLASH both when starting from SRAM or FLASH:
- * restrict access enough to keep SRAM working (if any)
- * but not too much to meddle with FLASH accesses
- */
-#define CONFIG_SYS_REMAP_OR_AM		0x80000000	/* OR addr mask */
-#define CONFIG_SYS_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
-
-/* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1	*/
-#define CONFIG_SYS_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_BI | OR_SCY_5_CLK | OR_TRLX)
-
-#define CONFIG_SYS_OR0_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V )
-
-#if CONFIG_NETTA2_VERSION == 2
-
-#define FLASH_BASE4_PRELIM	0x40080000	/* FLASH bank #1	*/
-
-#define CONFIG_SYS_OR4_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_OR4_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_BR4_PRELIM	((FLASH_BASE4_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V )
-
-#endif
-
-/*
- * BR3 and OR3 (SDRAM)
- *
- */
-#define SDRAM_BASE3_PRELIM	0x00000000	/* SDRAM bank #0	*/
-#define	SDRAM_MAX_SIZE		(256 << 20)	/* max 256MB per bank	*/
-
-/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
-#define CONFIG_SYS_OR_TIMING_SDRAM	(OR_CSNT_SAM | OR_G5LS)
-
-#define CONFIG_SYS_OR3_PRELIM	((0xFFFFFFFFLU & ~(SDRAM_MAX_SIZE - 1)) | CONFIG_SYS_OR_TIMING_SDRAM)
-#define CONFIG_SYS_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMB | BR_PS_32 | BR_V)
-
-/*
- * Memory Periodic Timer Prescaler
- */
-
-/*
- * Memory Periodic Timer Prescaler
- *
- * The Divider for PTA (refresh timer) configuration is based on an
- * example SDRAM configuration (64 MBit, one bank). The adjustment to
- * the number of chip selects (NCS) and the actually needed refresh
- * rate is done by setting MPTPR.
- *
- * PTA is calculated from
- *	PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS)
- *
- *	gclk	  CPU clock (not bus clock!)
- *	Trefresh  Refresh cycle * 4 (four word bursts used)
- *
- * 4096  Rows from SDRAM example configuration
- * 1000  factor s -> ms
- *   32  PTP (pre-divider from MPTPR) from SDRAM example configuration
- *    4  Number of refresh cycles per period
- *   64  Refresh cycle in ms per number of rows
- * --------------------------------------------
- * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000
- *
- * 50 MHz => 50.000.000 / Divider =  98
- * 66 Mhz => 66.000.000 / Divider = 129
- * 80 Mhz => 80.000.000 / Divider = 156
- */
-
-#define CONFIG_SYS_MAMR_PTA		 234
-
-/*
- * For 16 MBit, refresh rates could be 31.3 us
- * (= 64 ms / 2K = 125 / quad bursts).
- * For a simpler initialization, 15.6 us is used instead.
- *
- * #define CONFIG_SYS_MPTPR_2BK_2K	MPTPR_PTP_DIV32		for 2 banks
- * #define CONFIG_SYS_MPTPR_1BK_2K	MPTPR_PTP_DIV64		for 1 bank
- */
-#define CONFIG_SYS_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
-#define CONFIG_SYS_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
-
-/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
-#define CONFIG_SYS_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
-#define CONFIG_SYS_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
-
-/*
- * MAMR settings for SDRAM
- */
-
-/* 8 column SDRAM */
-#define CONFIG_SYS_MAMR_8COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
-			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
-			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
-
-/* 9 column SDRAM */
-#define CONFIG_SYS_MAMR_9COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
-			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
-			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
-
-#define CONFIG_LAST_STAGE_INIT		/* needed to reset the damn phys */
-
-/****************************************************************/
-
-#define DSP_SIZE	0x00010000	/* 64K */
-#define NAND_SIZE	0x00010000	/* 64K */
-
-#define DSP_BASE	0xF1000000
-#define NAND_BASE	0xF1010000
-
-/*****************************************************************************/
-
-#define CONFIG_SYS_DIRECT_FLASH_TFTP
-
-/*****************************************************************************/
-
-#if CONFIG_NETTA2_VERSION == 1
-#define STATUS_LED_BIT		0x00000008		/* bit 28 */
-#elif CONFIG_NETTA2_VERSION == 2
-#define STATUS_LED_BIT		0x00000080		/* bit 24 */
-#endif
-
-#define STATUS_LED_PERIOD	(CONFIG_SYS_HZ / 2)
-#define STATUS_LED_STATE	STATUS_LED_BLINKING
-
-#define STATUS_LED_ACTIVE	0		/* LED on for bit == 0	*/
-#define STATUS_LED_BOOT		0		/* LED 0 used for boot status */
-
-#ifndef __ASSEMBLY__
-
-/* LEDs */
-
-/* led_id_t is unsigned int mask */
-typedef unsigned int led_id_t;
-
-#define __led_toggle(_msk) \
-	do { \
-		((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat ^= (_msk); \
-	} while(0)
-
-#define __led_set(_msk, _st) \
-	do { \
-		if ((_st)) \
-			((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat |= (_msk); \
-		else \
-			((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat &= ~(_msk); \
-	} while(0)
-
-#define __led_init(msk, st) __led_set(msk, st)
-
-#endif
-
-/***********************************************************************************************************
-
- ----------------------------------------------------------------------------------------------
-
-   (V1) version 1 of the board
-   (V2) version 2 of the board
-
- ----------------------------------------------------------------------------------------------
-
-   Pin definitions:
-
- +------+----------------+--------+------------------------------------------------------------
- |  #   | Name           | Type   | Comment
- +------+----------------+--------+------------------------------------------------------------
- | PA3  | SPIEN_MAX      | Output | MAX serial to uart chip select
- | PA7  | DSP_INT        | Output | DSP interrupt
- | PA10 | DSP_RESET      | Output | DSP reset
- | PA14 | USBOE          | Output | USB (1)
- | PA15 | USBRXD         | Output | USB (1)
- | PB19 | BT_RTS         | Output | Bluetooth (0)
- | PB23 | BT_CTS         | Output | Bluetooth (0)
- | PB26 | SPIEN_SEP      | Output | Serial EEPROM chip select
- | PB27 | SPICS_DISP     | Output | Display chip select
- | PB28 | SPI_RXD_3V     | Input  | SPI Data Rx
- | PB29 | SPI_TXD        | Output | SPI Data Tx
- | PB30 | SPI_CLK        | Output | SPI Clock
- | PC10 | DISPA0         | Output | Display A0
- | PC11 | BACKLIGHT      | Output | Display backlit
- | PC12 | SPI2RXD        | Input  | (V1) 2nd SPI RXD
- |      | IO_RESET       | Output | (V2) General I/O reset
- | PC13 | SPI2TXD        | Output | (V1) 2nd SPI TXD (V1)
- |      | HOOK           | Input  | (V2) Hook input interrupt
- | PC15 | SPI2CLK        | Output | (V1) 2nd SPI CLK
- |      | F_RY_BY        | Input  | (V2) NAND F_RY_BY
- | PE17 | F_ALE          | Output | NAND F_ALE
- | PE18 | F_CLE          | Output | NAND F_CLE
- | PE20 | F_CE           | Output | NAND F_CE
- | PE24 | SPICS_SCOUT    | Output | (V1) Codec chip select
- |      | LED            | Output | (V2) LED
- | PE27 | SPICS_ER       | Output | External serial register CS
- | PE28 | LEDIO1         | Output | (V1) LED
- |      | BKBR1          | Input  | (V2) Keyboard input scan
- | PE29 | LEDIO2         | Output | (V1) LED hook for A (TA2)
- |      | BKBR2          | Input  | (V2) Keyboard input scan
- | PE30 | LEDIO3         | Output | (V1) LED hook for A (TA2)
- |      | BKBR3          | Input  | (V2) Keyboard input scan
- | PE31 | F_RY_BY        | Input  | (V1) NAND F_RY_BY
- |      | BKBR4          | Input  | (V2) Keyboard input scan
- +------+----------------+--------+---------------------------------------------------
-
- ----------------------------------------------------------------------------------------------
-
-   Serial register input:
-
- +------+----------------+------------------------------------------------------------
- |  #   | Name           | Comment
- +------+----------------+------------------------------------------------------------
- |    4 | HOOK           | Hook switch
- |    5 | BT_LINK        | Bluetooth link status
- |    6 | HOST_WAKE      | Bluetooth host wake up
- |    7 | OK_ETH         | Cisco inline power OK status
- +------+----------------+------------------------------------------------------------
-
- ----------------------------------------------------------------------------------------------
-
- Chip selects:
-
- +------+----------------+------------------------------------------------------------
- |  #   | Name           | Comment
- +------+----------------+------------------------------------------------------------
- | CS0  | CS0            | Boot flash
- | CS1  | CS_FLASH       | NAND flash
- | CS2  | CS_DSP         | DSP
- | CS3  | DCS_DRAM       | DRAM
- | CS4  | CS_FLASH2      | (V2) 2nd flash
- +------+----------------+------------------------------------------------------------
-
- ----------------------------------------------------------------------------------------------
-
- Interrupts:
-
- +------+----------------+------------------------------------------------------------
- |  #   | Name           | Comment
- +------+----------------+------------------------------------------------------------
- | IRQ1 | IRQ_DSP        | DSP interrupt
- | IRQ3 | S_INTER        | DUSLIC ???
- | IRQ4 | F_RY_BY        | NAND
- | IRQ7 | IRQ_MAX        | MAX 3100 interrupt
- +------+----------------+------------------------------------------------------------
-
- ----------------------------------------------------------------------------------------------
-
- Interrupts on PCMCIA pins:
-
- +------+----------------+------------------------------------------------------------
- |  #   | Name           | Comment
- +------+----------------+------------------------------------------------------------
- | IP_A0| PHY1_LINK      | Link status changed for #1 Ethernet interface
- | IP_A1| PHY2_LINK      | Link status changed for #2 Ethernet interface
- | IP_A2| RMII1_MDINT    | PHY interrupt for #1
- | IP_A3| RMII2_MDINT    | PHY interrupt for #2
- | IP_A5| HOST_WAKE      | (V2) Bluetooth host wake
- | IP_A6| OK_ETH         | (V2) Cisco inline power OK
- +------+----------------+------------------------------------------------------------
-
-**************************************************************************************************/
-
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV		1
-#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE	1
-#define CONFIG_SYS_CONSOLE_ENV_OVERWRITE	1
-
-/*************************************************************************************************/
-
-/* use board specific hardware */
-#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
-#define CONFIG_HW_WATCHDOG
-
-/*************************************************************************************************/
-
-#define CONFIG_CDP_DEVICE_ID		20
-#define CONFIG_CDP_DEVICE_ID_PREFIX	"NT"	/* netta2 */
-#define CONFIG_CDP_PORT_ID		"eth%d"
-#define CONFIG_CDP_CAPABILITIES		0x00000010
-#define CONFIG_CDP_VERSION		"u-boot" " " U_BOOT_DATE " " U_BOOT_TIME
-#define CONFIG_CDP_PLATFORM		"Intracom NetTA2"
-#define CONFIG_CDP_TRIGGER		0x20020001
-#define CONFIG_CDP_POWER_CONSUMPTION	4300	/* 90 mA @ 48V */
-#define CONFIG_CDP_APPLIANCE_VLAN_TYPE	0x01	/* ipphone ? */
-
-/*************************************************************************************************/
-
-#define CONFIG_AUTO_COMPLETE	1
-
-/*************************************************************************************************/
-
-#define CONFIG_CRC32_VERIFY	1
-
-/*************************************************************************************************/
-
-#define CONFIG_HUSH_OLD_PARSER_COMPATIBLE	1
-
-/*************************************************************************************************/
-#endif	/* __CONFIG_H */
diff --git a/include/configs/P1023RDS.h b/include/configs/P1023RDS.h
index 8601eec..ac75b9c 100644
--- a/include/configs/P1023RDS.h
+++ b/include/configs/P1023RDS.h
@@ -14,23 +14,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#ifdef CONFIG_NAND
-#define CONFIG_NAND_U_BOOT
-#define CONFIG_RAMBOOT_NAND
-#endif
-
-#ifdef CONFIG_NAND_U_BOOT
-#define CONFIG_SYS_TEXT_BASE_SPL	0xfff00000
-#define CONFIG_SYS_TEXT_BASE		0x11001000
-
-#ifdef CONFIG_NAND_SPL
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */
-#else
-#define CONFIG_SYS_LDSCRIPT $(CPUDIR)/u-boot-nand.lds
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE	/* start of monitor */
-#endif /* CONFIG_NAND_SPL */
-#endif
-
 #ifndef CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_TEXT_BASE	0xeff40000
 #endif
@@ -162,7 +145,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_BCSR_BASE		0xe0000000 /* start of on board FPGA */
 #define CONFIG_SYS_BCSR_BASE_PHYS	CONFIG_SYS_BCSR_BASE
 
-#ifndef CONFIG_NAND
 #define CONFIG_SYS_FLASH_BASE		0xee000000 /* start of FLASH 32M */
 
 #define CONFIG_SYS_FLASH_BASE_PHYS	CONFIG_SYS_FLASH_BASE
@@ -179,11 +161,8 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_MAX_FLASH_SECT	512	/* sectors per device */
 #define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
 #define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
-#else
-#define CONFIG_SYS_NO_FLASH
-#endif
 
-#if defined(CONFIG_SYS_SPL) || defined(CONFIG_RAMBOOT_NAND)
+#if defined(CONFIG_SYS_SPL)
 #define CONFIG_SYS_RAMBOOT
 #endif
 
@@ -239,17 +218,6 @@ extern unsigned long get_clock_freq(void);
 				| OR_FCM_TRLX \
 				| OR_FCM_EHTR)
 
-#ifdef CONFIG_RAMBOOT_NAND
-/* NAND Base Address */
-#define CONFIG_SYS_BR0_PRELIM	CONFIG_SYS_NAND_BR_PRELIM
-#define CONFIG_SYS_OR0_PRELIM	CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
-/* chip select 1 - BCSR */
-#define CONFIG_SYS_BR1_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_BCSR_BASE_PHYS) \
-				| BR_MS_GPCM | BR_PS_8 | BR_V)
-#define CONFIG_SYS_OR1_PRELIM  (OR_AM_32KB | OR_GPCM_CSNT | OR_GPCM_XACS \
-				| OR_GPCM_SCY | OR_GPCM_TRLX | OR_GPCM_EHTR \
-				| OR_GPCM_EAD)
-#else
 #define CONFIG_SYS_BR0_PRELIM  CONFIG_FLASH_BR_PRELIM	/* NOR Base Address */
 #define CONFIG_SYS_OR0_PRELIM  CONFIG_FLASH_OR_PRELIM	/* NOR Options */
 /* chip select 1 - BCSR */
@@ -258,7 +226,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_OR1_PRELIM  (OR_AM_32KB | OR_GPCM_CSNT | OR_GPCM_XACS \
 				| OR_GPCM_SCY | OR_GPCM_TRLX | OR_GPCM_EHTR \
 				| OR_GPCM_EAD)
-#endif
 
 /* Serial Port
  * open - index 2
@@ -381,15 +348,9 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_ENV_OVERWRITE
 
 #if defined(CONFIG_SYS_RAMBOOT)
-#if defined(CONFIG_RAMBOOT_NAND)
-#define CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_SIZE		CONFIG_SYS_NAND_BLOCK_SIZE
-#define CONFIG_ENV_OFFSET	((768 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE)
-#else
 #define CONFIG_ENV_IS_NOWHERE	/* Store ENV in memory only */
 #define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - 0x4000)
 #define CONFIG_ENV_SIZE		0x2000
-#endif
 #else
 #define CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
@@ -496,15 +457,10 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_PHY_MARVELL
 #endif
 
-#ifndef CONFIG_NAND
 /* Default address of microcode for the Linux Fman driver */
 /* QE microcode/firmware address */
 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 #define CONFIG_SYS_FMAN_FW_ADDR	0xEFF00000
-#else
-#define CONFIG_SYS_QE_FMAN_FW_IN_NAND
-#define CONFIG_SYS_FMAN_FW_ADDR	0x1f00000
-#endif
 #define CONFIG_SYS_QE_FMAN_FW_LENGTH	0x10000
 #define CONFIG_SYS_FDT_PAD		(0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 
diff --git a/include/configs/QS823.h b/include/configs/QS823.h
deleted file mode 100644
index 6733460..0000000
--- a/include/configs/QS823.h
+++ /dev/null
@@ -1,551 +0,0 @@
-/*
- * (C) Copyright 2003
- * MuLogic B.V.
- *
- * (C) Copyright 2002
- * Simple Network Magic Corporation
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/* various debug settings */
-#undef CONFIG_SYS_DEVICE_NULLDEV		/* null device */
-#undef CONFIG_SILENT_CONSOLE		/* silent console */
-#undef CONFIG_SYS_CONSOLE_INFO_QUIET		/* silent console ? */
-#undef DEBUG_FLASH			/* debug flash code */
-#undef FLASH_DEBUG			/* debug fash code */
-#undef DEBUG_ENV			/* debug environment code */
-
-#define CONFIG_SYS_DIRECT_FLASH_TFTP	1	/* allow direct tftp to flash */
-#define CONFIG_ENV_OVERWRITE	1	/* allow overwrite MAC address */
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_MPC823		1	/* This is a MPC823 CPU */
-#define CONFIG_QS823		1	/* ...on a QS823 module */
-#define CONFIG_SCC2_ENET	1	/* SCC2 10BaseT ethernet */
-
-#define	CONFIG_SYS_TEXT_BASE	0xFFF00000
-
-/* Select the target clock speed */
-#undef CONFIG_CLOCK_16MHZ		/* cpu=16,777,216 Hz, mem=16Mhz */
-#undef CONFIG_CLOCK_33MHZ		/* cpu=33,554,432 Hz, mem=33Mhz */
-#undef CONFIG_CLOCK_50MHZ		/* cpu=49,971,200 Hz, mem=33Mhz */
-#define CONFIG_CLOCK_66MHZ	1	/* cpu=67,108,864 Hz, mem=66Mhz */
-#undef CONFIG_CLOCK_80MHZ		/* cpu=79,986,688 Hz, mem=33Mhz */
-
-#ifdef CONFIG_CLOCK_16MHZ
-#define CONFIG_CLOCK_MULT	512
-#endif
-
-#ifdef CONFIG_CLOCK_33MHZ
-#define CONFIG_CLOCK_MULT	1024
-#endif
-
-#ifdef CONFIG_CLOCK_50MHZ
-#define CONFIG_CLOCK_MULT	1525
-#endif
-
-#ifdef CONFIG_CLOCK_66MHZ
-#define CONFIG_CLOCK_MULT	2048
-#endif
-
-#ifdef CONFIG_CLOCK_80MHZ
-#define CONFIG_CLOCK_MULT	2441
-#endif
-
-/* choose flash size, 4Mb or 8Mb */
-#define CONFIG_FLASH_4MB	1	/* board has 4Mb flash */
-#undef CONFIG_FLASH_8MB			/* board has 8Mb flash */
-
-#define CONFIG_CLOCK_BASE	32768	/* Base clock input freq */
-
-#undef CONFIG_8xx_CONS_SMC1
-#define CONFIG_8xx_CONS_SMC2	1	/* Console is on SMC2 */
-#undef CONFIG_8xx_CONS_NONE
-
-#define CONFIG_BAUDRATE		38400	/* console baudrate = 38.4kbps */
-
-#undef CONFIG_CLOCKS_IN_MHZ		/* clocks passsed to Linux in MHz */
-
-/* Define default IP addresses */
-#define CONFIG_IPADDR		192.168.1.99	/* own ip address */
-#define CONFIG_SERVERIP		192.168.1.19	/* used for tftp (not nfs?) */
-
-/* message to say directly after booting */
-#define CONFIG_PREBOOT		"echo '';" \
-	"echo 'type:';" \
-	"echo 'run boot_nfs       to boot to NFS';" \
-	"echo 'run boot_flash     to boot to flash';" \
-	"echo '';" \
-	"echo 'run flash_rootfs   to install a new rootfs';" \
-	"echo 'run flash_env      to clear the env sector';" \
-	"echo 'run flash_rw       to clear the rw fs';" \
-	"echo 'run flash_uboot    to install a new u-boot';" \
-	"echo 'run flash_kernel   to install a new kernel';"
-
-/* wait 5 seconds before executing CONFIG_BOOTCOMMAND */
-#define CONFIG_BOOTDELAY	5
-#define CONFIG_BOOTCOMMAND	"run boot_nfs"
-
-#undef CONFIG_BOOTARGS		/* made by set_nfs of set_flash */
-
-/* Our flash filesystem looks like this
- *
- * 4Mb board:
- * ffc0 0000 - ffeb ffff	root filesystem (jffs2) (~3Mb)
- * ffec 0000 - ffed ffff	read-write filesystem (ext2)
- * ffee 0000 - ffef ffff	environment
- * fff0 0000 - fff1 ffff	u-boot
- * fff2 0000 - ffff ffff	linux kernel
- *
- * 8Mb board:
- * ff80 0000 - ffeb ffff	root filesystem (jffs2) (~7Mb)
- * ffec 0000 - ffed ffff	read-write filesystem (ext2)
- * ffee 0000 - ffef ffff	environment
- * fff0 0000 - fff1 ffff	u-boot
- * fff2 0000 - ffff ffff	linux kernel
- *
- */
-
-/* environment for 4Mb board */
-#ifdef CONFIG_FLASH_4MB
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	"serial#=QS823\0" \
-	"hostname=qs823\0" \
-	"netdev=eth0\0" \
-	"ethaddr=00:01:02:B4:36:56\0" \
-	"rootpath=/exports/rootfs\0" \
-	"mtdparts=mtdparts=phys:2816k(root),128k(rw),128k(env),128k(u-boot),-(kernel)\0" \
-	/* fill in variables */ \
-	"set_ip=setenv ip ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off\0" \
-	"set_nfs=setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath $ip init=/sbin/init $mtdparts\0" \
-	"set_flash=setenv bootargs root=/dev/mtdblock1 ro $ip init=/sbin/init $mtdparts\0" \
-	/* commands */ \
-	"boot_nfs=run set_ip; run set_nfs; tftp 0x400000 /tftpboot/vmlinux.UBoot; bootm 0x400000\0" \
-	"boot_flash=run set_ip; run set_flash; bootm fff20000\0" \
-	/* reinstall flash parts */ \
-	"flash_rootfs=protect off ffc00000 ffebffff; era ffc00000 ffebffff; tftp ffc00000 /tftpboot/rootfs.jffs2\0" \
-	"flash_rw=protect off ffec0000 ffedffff; era ffec0000 ffedffff\0" \
-	"flash_env=protect off ffee0000 ffefffff; era ffee0000 ffefffff\0" \
-	"flash_uboot=protect off fff00000 fff1ffff; era fff00000 fff1ffff; tftp fff00000 /tftpboot/u-boot.4mb.bin\0" \
-	"flash_kernel=protect off fff20000 ffffffff; era fff20000 ffffffff; tftp fff20000 /tftpboot/vmlinux.UBoot\0"
-#endif /* CONFIG_FLASH_4MB */
-
-/* environment for 8Mb board */
-#ifdef CONFIG_FLASH_8MB
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	"serial#=QS823\0" \
-	"hostname=qs823\0" \
-	"netdev=eth0\0" \
-	"ethaddr=00:01:02:B4:36:56\0" \
-	"rootpath=/exports/rootfs\0" \
-	"mtdparts=mtdparts=phys:6912k(root),128k(rw),128k(env),128k(u-boot),-(kernel)\0" \
-	/* fill in variables */ \
-	"set_ip=setenv ip ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off\0" \
-	"set_nfs=setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath $ip init=/sbin/init $mtdparts\0" \
-	"set_flash=setenv bootargs root=/dev/mtdblock1 ro $ip init=/sbin/init $mtdparts\0" \
-	/* commands */ \
-	"boot_nfs=run set_ip; run set_nfs; tftp 0x400000 /tftpboot/vmlinux.UBoot; bootm 0x400000\0" \
-	"boot_flash=run set_ip; run set_flash; bootm fff20000\0" \
-	/* reinstall flash parts */ \
-	"flash_rootfs=protect off ff800000 ffebffff; era ff800000 ffebffff; tftp ff800000 /tftpboot/rootfs.jffs2\0" \
-	"flash_rw=protect off ffec0000 ffedffff; era ffec0000 ffedffff\0" \
-	"flash_env=protect off ffee0000 ffefffff; era ffee0000 ffefffff\0" \
-	"flash_uboot=protect off fff00000 fff1ffff; era fff00000 fff1ffff; tftp fff00000 /tftpboot/u-boot.8mb.bin\0" \
-	"flash_kernel=protect off fff20000 ffffffff; era fff20000 ffffffff; tftp fff20000 /tftpboot/vmlinux.UBoot\0"
-#endif /* CONFIG_FLASH_8MB */
-
-#define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
-#undef CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change */
-#undef CONFIG_WATCHDOG			/* watchdog disabled */
-#undef CONFIG_STATUS_LED		/* Status LED disabled */
-#undef CONFIG_CAN_DRIVER		/* CAN Driver support disabled */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-#undef CONFIG_MAC_PARTITION
-#undef CONFIG_DOS_PARTITION
-
-#define CONFIG_RTC_MPC8xx	/* use internal RTC of MPC8xx */
-
-
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_BDI
-#define CONFIG_CMD_BOOTD
-#define CONFIG_CMD_CONSOLE
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_SAVEENV
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_IMI
-#define CONFIG_CMD_IMMAP
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_RUN
-
-
-/*-----------------------------------------------------------------------
- * Environment variable storage is in FLASH, one sector before U-boot
- */
-#define CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_SECT_SIZE	0x20000		/* 128Kb, one whole sector */
-#define CONFIG_ENV_SIZE		0x2000		/* 8kb */
-#define CONFIG_ENV_ADDR		0xffee0000	/* address of env sector */
-
-/*-----------------------------------------------------------------------
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP				/* undef to save memory */
-
-#define CONFIG_SYS_HUSH_PARSER		1		/* use "hush" command parser */
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE		1024		/* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS		16		/* max number of command args */
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works */
-#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR		0x400000	/* default load address */
-
-/*-----------------------------------------------------------------------
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR		0xFF000000
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE	0x2F00		/* Size of used area in DPRAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_FLASH_BASE		0xFF800000	/* Allow an 8Mbyte window */
-
-#define FLASH_BASE0_4M_PRELIM	0xFFC00000	/* Base for 4M Flash */
-#define FLASH_BASE0_8M_PRELIM	0xFF800000	/* Base for 8M Flash */
-
-#define CONFIG_SYS_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor */
-#define CONFIG_SYS_MONITOR_BASE	0xFFF00000	/* U-boot location */
-#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc() */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
-
-/*-----------------------------------------------------------------------
- * TODO flash parameters
- * FLASH organization for Intel Strataflash
- */
-#undef  CONFIG_SYS_FLASH_16BIT				/* 32-bit wide flash memory */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT	71		/* max number of sectors on one chip */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	120000		/* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500		/* Timeout for Flash Write (in ms) */
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE	16		/* For all MPC8xx CPUs */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT	4		/* log base 2 of the above value */
-#endif
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control 11-9
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
- */
-
-#ifdef CONFIG_WATCHDOG
-#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWE | SYPCR_SWRI | SYPCR_SWP)
-#else
-#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWRI | SYPCR_SWP)
-#endif
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration 11-6
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_SIUMCR	(SIUMCR_DLK | SIUMCR_DPC | SIUMCR_MPRE | SIUMCR_MLRC01 | SIUMCR_GB5E)
-
-/*-----------------------------------------------------------------------
- * TBSCR - Time Base Status and Control 11-26
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
-
-/*-----------------------------------------------------------------------
- * RTCSC - Real-Time Clock Status and Control Register 11-27
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control 11-31
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
-
-/*-----------------------------------------------------------------------
- * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
- *-----------------------------------------------------------------------
- */
-
-/* MF (Multiplication Factor of SPLL) */
-/* Sets the QS823 to specified clock from 32KHz clock at EXTAL. */
-#define vPLPRCR_MF	((CONFIG_CLOCK_MULT+1) << 20)
-#define CONFIG_SYS_PLPRCR	(vPLPRCR_MF | PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST | PLPRCR_LOLRE)
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock and reset Control Register		15-27
- *-----------------------------------------------------------------------
- */
-#if defined(CONFIG_CLOCK_16MHZ) || defined(CONFIG_CLOCK_33MHZ) || defined(CONFIG_CLOCK_50MHZ)
-#define CONFIG_SYS_SCCR		(SCCR_TBS | SCCR_EBDF00 | SCCR_DFBRG00)
-#define CONFIG_SYS_BRGCLK_PRESCALE	1
-#endif
-
-#if defined(CONFIG_CLOCK_66MHZ)
-#define CONFIG_SYS_SCCR		(SCCR_TBS | SCCR_EBDF00 | SCCR_DFBRG01)
-#define CONFIG_SYS_BRGCLK_PRESCALE	4
-#endif
-
-#if defined(CONFIG_CLOCK_80MHZ)
-#define CONFIG_SYS_SCCR		(SCCR_TBS | SCCR_EBDF01 | SCCR_DFBRG01)
-#define CONFIG_SYS_BRGCLK_PRESCALE	4
-#endif
-
-#define SCCR_MASK		CONFIG_SYS_SCCR
-
-/*-----------------------------------------------------------------------
- * Debug Enable Register
- * 0x73E67C0F - All interrupts handled by BDM
- * 0x00824001 - Only interrupts needed by MWDebug.exe handled by BDM
- *-----------------------------------------------------------------------
-#define CONFIG_SYS_DER			0x73E67C0F
-#define CONFIG_SYS_DER			0x0082400F
-
- #-------------------------------------------------------------------------
- # Program the Debug Enable Register (DER). This register provides the user
- # with the reason for entering into the debug mode. We want all conditions
- # to end up as an exception. We don't want to enter into debug mode for
- # any condition. See the back of of the Development Support section of the
- # MPC860 User Manual for a description of this register.
- #-------------------------------------------------------------------------
-*/
-#define CONFIG_SYS_DER			0
-
-/*-----------------------------------------------------------------------
- * Memory Controller Initialization Constants
- *-----------------------------------------------------------------------
- */
-
-/*
- * BR0 and OR0 (AMD dual FLASH devices)
- * Base address = 0xFFF0_0000 - 0xFFF7_FFFF (After relocation)
- */
-#define CONFIG_SYS_PRELIM_OR_AM
-#define CONFIG_SYS_OR_TIMING_FLASH
-
-/*
- *-----------------------------------------------------------------------
- * Base Register 0 (BR0): Bank 0 is assigned to the 8Mbyte (2M X 32)
- *                        flash that resides on the QS823.
- *-----------------------------------------------------------------------
- */
-
-/* BA (Base Address) = 0xFF80+0b for a total of 17 bits. 17 bit base addr */
-/*                     represents a minumum 32K block size. */
-#define vBR0_BA			((0xFF80 << 16) + (0 << 15))
-#define CONFIG_SYS_BR0_PRELIM		(vBR0_BA | BR_V)
-
-/* AM (Address Mask) = 0xFF80+0b = We've masked the upper 9 bits        */
-/*                                 which defines a 8 Mbyte memory block. */
-#define vOR0_AM			((0xFF80 << 16) + (0 << 15))
-
-#if defined(CONFIG_CLOCK_50MHZ) || defined(CONFIG_CLOCK_80MHZ)
-/*  0101 = Add a 5 clock cycle wait state */
-#define CONFIG_SYS_OR0_PRELIM		(vOR0_AM | OR_CSNT_SAM | 0R_ACS_DIV4 | OR_BI | OR_SCY_5_CLK)
-#endif
-
-#if defined(CONFIG_CLOCK_33MHZ) || defined(CONFIG_CLOCK_66MHZ)
-/*  0011 = Add a 3 clock cycle wait state */
-/*  29.8ns clock * (3 + 2) = 149ns cycle time */
-#define CONFIG_SYS_OR0_PRELIM		(vOR0_AM | OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_3_CLK)
-#endif
-
-#if defined(CONFIG_CLOCK_16MHZ)
-/*  0010 = Add a 2 clock cycle wait state */
-#define CONFIG_SYS_OR0_PRELIM		(vOR0_AM | OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_2_CLK)
-#endif
-
-/*
- * BR1 and OR1 (SDRAM)
- * Base Address = 0x00000000 - 0x00FF_FFFF (16M After relocation)
- * Base Address = 0x00000000 - 0x01FF_FFFF (32M After relocation)
- * Base Address = 0x00000000 - 0x03FF_FFFF (64M After relocation)
- * Base Address = 0x00000000 - 0x07FF_FFFF (128M After relocation)
- */
-
-#define SDRAM_BASE		0x00000000	/* SDRAM bank */
-#define SDRAM_PRELIM_OR_AM	0xF8000000	/* map max. 128 MB */
-
-/* AM (Address Mask) = 0xF800+0b = We've masked the upper 5 bits which
- *                                 represents a 128 Mbyte block the DRAM in
- *                                 this address base.
- */
-#define vOR1_AM			((0xF800 << 16) + (0 << 15))
-#define vBR1_BA			((0x0000 << 16) + (0 << 15))
-#define CONFIG_SYS_OR1			(vOR1_AM | OR_CSNT_SAM | OR_BI)
-#define CONFIG_SYS_BR1			(vBR1_BA | BR_MS_UPMA | BR_V)
-
-/* Machine A Mode Register */
-
-/* PTA Periodic Timer A */
-
-#if defined(CONFIG_CLOCK_80MHZ)
-#define vMAMR_PTA		(19 << 24)
-#endif
-
-#if defined(CONFIG_CLOCK_66MHZ)
-#define vMAMR_PTA		(16 << 24)
-#endif
-
-#if defined(CONFIG_CLOCK_50MHZ)
-#define vMAMR_PTA		(195 << 24)
-#endif
-
-#if defined(CONFIG_CLOCK_33MHZ)
-#define vMAMR_PTA		(131 << 24)
-#endif
-
-#if defined(CONFIG_CLOCK_16MHZ)
-#define vMAMR_PTA		(65 << 24)
-#endif
-
-/* For boards with 16M of SDRAM */
-#define SDRAM_16M_MAX_SIZE	0x01000000	/* max 16MB SDRAM */
-#define CONFIG_SYS_16M_MAMR		(vMAMR_PTA | MAMR_AMA_TYPE_0 | MAMR_DSA_2_CYCL | MAMR_G0CLA_A11 |\
-MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
-
-/* For boards with 32M of SDRAM */
-#define SDRAM_32M_MAX_SIZE	0x02000000	/* max 32MB SDRAM */
-#define CONFIG_SYS_32M_MAMR		(vMAMR_PTA | MAMR_AMA_TYPE_1 | MAMR_DSA_2_CYCL | MAMR_G0CLA_A10 |\
-MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
-
-
-/* Memory Periodic Timer Prescaler Register */
-
-#if defined(CONFIG_CLOCK_66MHZ) || defined(CONFIG_CLOCK_80MHZ)
-/* Divide by 32 */
-#define CONFIG_SYS_MPTPR		0x02
-#endif
-
-#if defined(CONFIG_CLOCK_16MHZ) || defined(CONFIG_CLOCK_33MHZ) || defined(CONFIG_CLOCK_50MHZ)
-/* Divide by 16 */
-#define CONFIG_SYS_MPTPR		0x04
-#endif
-
-/*
- * BR2 and OR2 (Unused)
- * Base address = 0xF020_0000 - 0xF020_0FFF
- *
- */
-#define CONFIG_SYS_OR2_PRELIM		0xFFF00000
-#define CONFIG_SYS_BR2_PRELIM		0xF0200000
-
-/*
- * BR3 and OR3 (External Bus CS3)
- * Base address = 0xF030_0000 - 0xF030_0FFF
- *
- */
-#define CONFIG_SYS_OR3_PRELIM		0xFFF00000
-#define CONFIG_SYS_BR3_PRELIM		0xF0300000
-
-/*
- * BR4 and OR4 (External Bus CS3)
- * Base address = 0xF040_0000 - 0xF040_0FFF
- *
- */
-#define CONFIG_SYS_OR4_PRELIM		0xFFF00000
-#define CONFIG_SYS_BR4_PRELIM		0xF0400000
-
-
-/*
- * BR4 and OR4 (External Bus CS3)
- * Base address = 0xF050_0000 - 0xF050_0FFF
- *
- */
-#define CONFIG_SYS_OR5_PRELIM		0xFFF00000
-#define CONFIG_SYS_BR5_PRELIM		0xF0500000
-
-/*
- * BR6 and OR6 (Unused)
- * Base address = 0xF060_0000 - 0xF060_0FFF
- *
- */
-#define CONFIG_SYS_OR6_PRELIM		0xFFF00000
-#define CONFIG_SYS_BR6_PRELIM		0xF0600000
-
-/*
- * BR7 and OR7 (Unused)
- * Base address = 0xF070_0000 - 0xF070_0FFF
- *
- */
-#define CONFIG_SYS_OR7_PRELIM		0xFFF00000
-#define CONFIG_SYS_BR7_PRELIM		0xF0700000
-
-/*
- * Sanity checks
- */
-#if defined(CONFIG_SCC1_ENET) && defined(CONFIG_FEC_ENET)
-#error Both CONFIG_SCC1_ENET and CONFIG_FEC_ENET configured
-#endif
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/QS850.h b/include/configs/QS850.h
deleted file mode 100644
index f114213..0000000
--- a/include/configs/QS850.h
+++ /dev/null
@@ -1,551 +0,0 @@
-/*
- * (C) Copyright 2003
- * MuLogic B.V.
- *
- * (C) Copyright 2002
- * Simple Network Magic Corporation
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/* various debug settings */
-#undef CONFIG_SYS_DEVICE_NULLDEV		/* null device */
-#undef CONFIG_SILENT_CONSOLE		/* silent console */
-#undef CONFIG_SYS_CONSOLE_INFO_QUIET		/* silent console ? */
-#undef DEBUG_FLASH			/* debug flash code */
-#undef FLASH_DEBUG			/* debug fash code */
-#undef DEBUG_ENV			/* debug environment code */
-
-#define CONFIG_SYS_DIRECT_FLASH_TFTP	1	/* allow direct tftp to flash */
-#define CONFIG_ENV_OVERWRITE	1	/* allow overwrite MAC address */
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_MPC850		1	/* This is a MPC850 CPU */
-#define CONFIG_QS850		1	/* ...on a QS850 module */
-#define CONFIG_SCC2_ENET	1	/* SCC2 10BaseT ethernet */
-
-#define	CONFIG_SYS_TEXT_BASE	0xFFF00000
-
-/* Select the target clock speed */
-#undef CONFIG_CLOCK_16MHZ		/* cpu=16,777,216 Hz, mem=16Mhz */
-#undef CONFIG_CLOCK_33MHZ		/* cpu=33,554,432 Hz, mem=33Mhz */
-#undef CONFIG_CLOCK_50MHZ		/* cpu=49,971,200 Hz, mem=33Mhz */
-#define CONFIG_CLOCK_66MHZ	1	/* cpu=67,108,864 Hz, mem=66Mhz */
-#undef CONFIG_CLOCK_80MHZ		/* cpu=79,986,688 Hz, mem=33Mhz */
-
-#ifdef CONFIG_CLOCK_16MHZ
-#define CONFIG_CLOCK_MULT	512
-#endif
-
-#ifdef CONFIG_CLOCK_33MHZ
-#define CONFIG_CLOCK_MULT	1024
-#endif
-
-#ifdef CONFIG_CLOCK_50MHZ
-#define CONFIG_CLOCK_MULT	1525
-#endif
-
-#ifdef CONFIG_CLOCK_66MHZ
-#define CONFIG_CLOCK_MULT	2048
-#endif
-
-#ifdef CONFIG_CLOCK_80MHZ
-#define CONFIG_CLOCK_MULT	2441
-#endif
-
-/* choose flash size, 4Mb or 8Mb */
-#define CONFIG_FLASH_4MB	1	/* board has 4Mb flash */
-#undef CONFIG_FLASH_8MB			/* board has 8Mb flash */
-
-#define CONFIG_CLOCK_BASE	32768	/* Base clock input freq */
-
-#define CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1 */
-#undef CONFIG_8xx_CONS_SMC2
-#undef CONFIG_8xx_CONS_NONE
-
-#define CONFIG_BAUDRATE		38400	/* console baudrate = 38.4kbps */
-
-#undef CONFIG_CLOCKS_IN_MHZ		/* clocks passsed to Linux in MHz */
-
-/* Define default IP addresses */
-#define CONFIG_IPADDR		192.168.1.99	/* own ip address */
-#define CONFIG_SERVERIP		192.168.1.19	/* used for tftp (not nfs?) */
-
-/* message to say directly after booting */
-#define CONFIG_PREBOOT		"echo '';" \
-	"echo 'type:';" \
-	"echo 'run boot_nfs       to boot to NFS';" \
-	"echo 'run boot_flash     to boot to flash';" \
-	"echo '';" \
-	"echo 'run flash_rootfs   to install a new rootfs';" \
-	"echo 'run flash_env      to clear the env sector';" \
-	"echo 'run flash_rw       to clear the rw fs';" \
-	"echo 'run flash_uboot    to install a new u-boot';" \
-	"echo 'run flash_kernel   to install a new kernel';"
-
-/* wait 5 seconds before executing CONFIG_BOOTCOMMAND */
-#define CONFIG_BOOTDELAY	5
-#define CONFIG_BOOTCOMMAND	"run boot_nfs"
-
-#undef CONFIG_BOOTARGS		/* made by set_nfs of set_flash */
-
-/* Our flash filesystem looks like this
- *
- * 4Mb board:
- * ffc0 0000 - ffeb ffff	root filesystem (jffs2) (~3Mb)
- * ffec 0000 - ffed ffff	read-write filesystem (ext2)
- * ffee 0000 - ffef ffff	environment
- * fff0 0000 - fff1 ffff	u-boot
- * fff2 0000 - ffff ffff	linux kernel
- *
- * 8Mb board:
- * ff80 0000 - ffeb ffff	root filesystem (jffs2) (~7Mb)
- * ffec 0000 - ffed ffff	read-write filesystem (ext2)
- * ffee 0000 - ffef ffff	environment
- * fff0 0000 - fff1 ffff	u-boot
- * fff2 0000 - ffff ffff	linux kernel
- *
- */
-
-/* environment for 4Mb board */
-#ifdef CONFIG_FLASH_4MB
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	"serial#=QS850\0" \
-	"hostname=qs850\0" \
-	"netdev=eth0\0" \
-	"ethaddr=00:01:02:B4:36:56\0" \
-	"rootpath=/exports/rootfs\0" \
-	"mtdparts=mtdparts=phys:2816k(root),128k(rw),128k(env),128k(u-boot),-(kernel)\0" \
-	/* fill in variables */ \
-	"set_ip=setenv ip ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off\0" \
-	"set_nfs=setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath $ip init=/sbin/init $mtdparts\0" \
-	"set_flash=setenv bootargs root=/dev/mtdblock1 ro $ip init=/sbin/init $mtdparts\0" \
-	/* commands */ \
-	"boot_nfs=run set_ip; run set_nfs; tftp 0x400000 /tftpboot/vmlinux.UBoot; bootm 0x400000\0" \
-	"boot_flash=run set_ip; run set_flash; bootm fff20000\0" \
-	/* reinstall flash parts */ \
-	"flash_rootfs=protect off ffc00000 ffebffff; era ffc00000 ffebffff; tftp ffc00000 /tftpboot/rootfs.jffs2\0" \
-	"flash_rw=protect off ffec0000 ffedffff; era ffec0000 ffedffff\0" \
-	"flash_env=protect off ffee0000 ffefffff; era ffee0000 ffefffff\0" \
-	"flash_uboot=protect off fff00000 fff1ffff; era fff00000 fff1ffff; tftp fff00000 /tftpboot/u-boot.4mb.bin\0" \
-	"flash_kernel=protect off fff20000 ffffffff; era fff20000 ffffffff; tftp fff20000 /tftpboot/vmlinux.UBoot\0"
-#endif /* CONFIG_FLASH_4MB */
-
-/* environment for 8Mb board */
-#ifdef CONFIG_FLASH_8MB
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	"serial#=QS850\0" \
-	"hostname=qs850\0" \
-	"netdev=eth0\0" \
-	"ethaddr=00:01:02:B4:36:56\0" \
-	"rootpath=/exports/rootfs\0" \
-	"mtdparts=mtdparts=phys:6912k(root),128k(rw),128k(env),128k(u-boot),-(kernel)\0" \
-	/* fill in variables */ \
-	"set_ip=setenv ip ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off\0" \
-	"set_nfs=setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath $ip init=/sbin/init $mtdparts\0" \
-	"set_flash=setenv bootargs root=/dev/mtdblock1 ro $ip init=/sbin/init $mtdparts\0" \
-	/* commands */ \
-	"boot_nfs=run set_ip; run set_nfs; tftp 0x400000 /tftpboot/vmlinux.UBoot; bootm 0x400000\0" \
-	"boot_flash=run set_ip; run set_flash; bootm fff20000\0" \
-	/* reinstall flash parts */ \
-	"flash_rootfs=protect off ff800000 ffebffff; era ff800000 ffebffff; tftp ff800000 /tftpboot/rootfs.jffs2\0" \
-	"flash_rw=protect off ffec0000 ffedffff; era ffec0000 ffedffff\0" \
-	"flash_env=protect off ffee0000 ffefffff; era ffee0000 ffefffff\0" \
-	"flash_uboot=protect off fff00000 fff1ffff; era fff00000 fff1ffff; tftp fff00000 /tftpboot/u-boot.8mb.bin\0" \
-	"flash_kernel=protect off fff20000 ffffffff; era fff20000 ffffffff; tftp fff20000 /tftpboot/vmlinux.UBoot\0"
-#endif /* CONFIG_FLASH_8MB */
-
-#define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
-#undef CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change */
-#undef CONFIG_WATCHDOG			/* watchdog disabled */
-#undef CONFIG_STATUS_LED		/* Status LED disabled */
-#undef CONFIG_CAN_DRIVER		/* CAN Driver support disabled */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-#undef CONFIG_MAC_PARTITION
-#undef CONFIG_DOS_PARTITION
-
-#define CONFIG_RTC_MPC8xx	/* use internal RTC of MPC8xx */
-
-
-/*
- * Command line configuration.
- */
-
-#define CONFIG_CMD_BDI
-#define CONFIG_CMD_BOOTD
-#define CONFIG_CMD_CONSOLE
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_SAVEENV
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_IMI
-#define CONFIG_CMD_IMMAP
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_RUN
-
-
-/*-----------------------------------------------------------------------
- * Environment variable storage is in FLASH, one sector before U-boot
- */
-#define CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_SECT_SIZE	0x20000		/* 128Kb, one whole sector */
-#define CONFIG_ENV_SIZE		0x2000		/* 8kb */
-#define CONFIG_ENV_ADDR		0xffee0000	/* address of env sector */
-
-/*-----------------------------------------------------------------------
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP				/* undef to save memory */
-
-#define CONFIG_SYS_HUSH_PARSER		1		/* use "hush" command parser */
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE		1024		/* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS		16		/* max number of command args */
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works */
-#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR		0x400000	/* default load address */
-
-/*-----------------------------------------------------------------------
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR		0xFF000000
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE	0x2F00		/* Size of used area in DPRAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_FLASH_BASE		0xFF800000	/* Allow an 8Mbyte window */
-
-#define FLASH_BASE0_4M_PRELIM	0xFFC00000	/* Base for 4M Flash */
-#define FLASH_BASE0_8M_PRELIM	0xFF800000	/* Base for 8M Flash */
-
-#define CONFIG_SYS_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor */
-#define CONFIG_SYS_MONITOR_BASE	0xFFF00000	/* U-boot location */
-#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc() */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
-
-/*-----------------------------------------------------------------------
- * TODO flash parameters
- * FLASH organization for Intel Strataflash
- */
-#undef  CONFIG_SYS_FLASH_16BIT				/* 32-bit wide flash memory */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT	71		/* max number of sectors on one chip */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	120000		/* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500		/* Timeout for Flash Write (in ms) */
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE	16		/* For all MPC8xx CPUs */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT	4		/* log base 2 of the above value */
-#endif
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control 11-9
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
- */
-
-#ifdef CONFIG_WATCHDOG
-#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWE | SYPCR_SWRI | SYPCR_SWP)
-#else
-#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWRI | SYPCR_SWP)
-#endif
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration 11-6
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_SIUMCR	(SIUMCR_DLK | SIUMCR_DPC | SIUMCR_MPRE | SIUMCR_MLRC01 | SIUMCR_GB5E)
-
-/*-----------------------------------------------------------------------
- * TBSCR - Time Base Status and Control 11-26
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
-
-/*-----------------------------------------------------------------------
- * RTCSC - Real-Time Clock Status and Control Register 11-27
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control 11-31
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
-
-/*-----------------------------------------------------------------------
- * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
- *-----------------------------------------------------------------------
- */
-
-/* MF (Multiplication Factor of SPLL) */
-/* Sets the QS850 to specified clock from 32KHz clock at EXTAL. */
-#define vPLPRCR_MF	((CONFIG_CLOCK_MULT+1) << 20)
-#define CONFIG_SYS_PLPRCR	(vPLPRCR_MF | PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST | PLPRCR_LOLRE)
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock and reset Control Register		15-27
- *-----------------------------------------------------------------------
- */
-#if defined(CONFIG_CLOCK_16MHZ) || defined(CONFIG_CLOCK_33MHZ) || defined(CONFIG_CLOCK_50MHZ)
-#define CONFIG_SYS_SCCR		(SCCR_TBS | SCCR_EBDF00 | SCCR_DFBRG00)
-#define CONFIG_SYS_BRGCLK_PRESCALE	1
-#endif
-
-#if defined(CONFIG_CLOCK_66MHZ)
-#define CONFIG_SYS_SCCR		(SCCR_TBS | SCCR_EBDF00 | SCCR_DFBRG01)
-#define CONFIG_SYS_BRGCLK_PRESCALE	4
-#endif
-
-#if defined(CONFIG_CLOCK_80MHZ)
-#define CONFIG_SYS_SCCR		(SCCR_TBS | SCCR_EBDF01 | SCCR_DFBRG01)
-#define CONFIG_SYS_BRGCLK_PRESCALE	4
-#endif
-
-#define SCCR_MASK		CONFIG_SYS_SCCR
-
-/*-----------------------------------------------------------------------
- * Debug Enable Register
- * 0x73E67C0F - All interrupts handled by BDM
- * 0x00824001 - Only interrupts needed by MWDebug.exe handled by BDM
- *-----------------------------------------------------------------------
-#define CONFIG_SYS_DER			0x73E67C0F
-#define CONFIG_SYS_DER			0x0082400F
-
- #-------------------------------------------------------------------------
- # Program the Debug Enable Register (DER). This register provides the user
- # with the reason for entering into the debug mode. We want all conditions
- # to end up as an exception. We don't want to enter into debug mode for
- # any condition. See the back of of the Development Support section of the
- # MPC860 User Manual for a description of this register.
- #-------------------------------------------------------------------------
-*/
-#define CONFIG_SYS_DER			0
-
-/*-----------------------------------------------------------------------
- * Memory Controller Initialization Constants
- *-----------------------------------------------------------------------
- */
-
-/*
- * BR0 and OR0 (AMD dual FLASH devices)
- * Base address = 0xFFF0_0000 - 0xFFF7_FFFF (After relocation)
- */
-#define CONFIG_SYS_PRELIM_OR_AM
-#define CONFIG_SYS_OR_TIMING_FLASH
-
-/*
- *-----------------------------------------------------------------------
- * Base Register 0 (BR0): Bank 0 is assigned to the 8Mbyte (2M X 32)
- *                        flash that resides on the QS850.
- *-----------------------------------------------------------------------
- */
-
-/* BA (Base Address) = 0xFF80+0b for a total of 17 bits. 17 bit base addr */
-/*                     represents a minumum 32K block size. */
-#define vBR0_BA			((0xFF80 << 16) + (0 << 15))
-#define CONFIG_SYS_BR0_PRELIM		(vBR0_BA | BR_V)
-
-/* AM (Address Mask) = 0xFF80+0b = We've masked the upper 9 bits        */
-/*                                 which defines a 8 Mbyte memory block. */
-#define vOR0_AM			((0xFF80 << 16) + (0 << 15))
-
-#if defined(CONFIG_CLOCK_50MHZ) || defined(CONFIG_CLOCK_80MHZ)
-/*  0101 = Add a 5 clock cycle wait state */
-#define CONFIG_SYS_OR0_PRELIM		(vOR0_AM | OR_CSNT_SAM | 0R_ACS_DIV4 | OR_BI | OR_SCY_5_CLK)
-#endif
-
-#if defined(CONFIG_CLOCK_33MHZ) || defined(CONFIG_CLOCK_66MHZ)
-/*  0011 = Add a 3 clock cycle wait state */
-/*  29.8ns clock * (3 + 2) = 149ns cycle time */
-#define CONFIG_SYS_OR0_PRELIM		(vOR0_AM | OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_3_CLK)
-#endif
-
-#if defined(CONFIG_CLOCK_16MHZ)
-/*  0010 = Add a 2 clock cycle wait state */
-#define CONFIG_SYS_OR0_PRELIM		(vOR0_AM | OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_2_CLK)
-#endif
-
-/*
- * BR1 and OR1 (SDRAM)
- * Base Address = 0x00000000 - 0x00FF_FFFF (16M After relocation)
- * Base Address = 0x00000000 - 0x01FF_FFFF (32M After relocation)
- * Base Address = 0x00000000 - 0x03FF_FFFF (64M After relocation)
- * Base Address = 0x00000000 - 0x07FF_FFFF (128M After relocation)
- */
-
-#define SDRAM_BASE		0x00000000	/* SDRAM bank */
-#define SDRAM_PRELIM_OR_AM	0xF8000000	/* map max. 128 MB */
-
-/* AM (Address Mask) = 0xF800+0b = We've masked the upper 5 bits which
- *                                 represents a 128 Mbyte block the DRAM in
- *                                 this address base.
- */
-#define vOR1_AM			((0xF800 << 16) + (0 << 15))
-#define vBR1_BA			((0x0000 << 16) + (0 << 15))
-#define CONFIG_SYS_OR1			(vOR1_AM | OR_CSNT_SAM | OR_BI)
-#define CONFIG_SYS_BR1			(vBR1_BA | BR_MS_UPMA | BR_V)
-
-/* Machine A Mode Register */
-
-/* PTA Periodic Timer A */
-
-#if defined(CONFIG_CLOCK_80MHZ)
-#define vMAMR_PTA		(19 << 24)
-#endif
-
-#if defined(CONFIG_CLOCK_66MHZ)
-#define vMAMR_PTA		(16 << 24)
-#endif
-
-#if defined(CONFIG_CLOCK_50MHZ)
-#define vMAMR_PTA		(195 << 24)
-#endif
-
-#if defined(CONFIG_CLOCK_33MHZ)
-#define vMAMR_PTA		(131 << 24)
-#endif
-
-#if defined(CONFIG_CLOCK_16MHZ)
-#define vMAMR_PTA		(65 << 24)
-#endif
-
-/* For boards with 16M of SDRAM */
-#define SDRAM_16M_MAX_SIZE	0x01000000	/* max 16MB SDRAM */
-#define CONFIG_SYS_16M_MAMR		(vMAMR_PTA | MAMR_AMA_TYPE_0 | MAMR_DSA_2_CYCL | MAMR_G0CLA_A11 |\
-MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
-
-/* For boards with 32M of SDRAM */
-#define SDRAM_32M_MAX_SIZE	0x02000000	/* max 32MB SDRAM */
-#define CONFIG_SYS_32M_MAMR		(vMAMR_PTA | MAMR_AMA_TYPE_1 | MAMR_DSA_2_CYCL | MAMR_G0CLA_A10 |\
-MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
-
-
-/* Memory Periodic Timer Prescaler Register */
-
-#if defined(CONFIG_CLOCK_66MHZ) || defined(CONFIG_CLOCK_80MHZ)
-/* Divide by 32 */
-#define CONFIG_SYS_MPTPR		0x02
-#endif
-
-#if defined(CONFIG_CLOCK_16MHZ) || defined(CONFIG_CLOCK_33MHZ) || defined(CONFIG_CLOCK_50MHZ)
-/* Divide by 16 */
-#define CONFIG_SYS_MPTPR		0x04
-#endif
-
-/*
- * BR2 and OR2 (Unused)
- * Base address = 0xF020_0000 - 0xF020_0FFF
- *
- */
-#define CONFIG_SYS_OR2_PRELIM		0xFFF00000
-#define CONFIG_SYS_BR2_PRELIM		0xF0200000
-
-/*
- * BR3 and OR3 (External Bus CS3)
- * Base address = 0xF030_0000 - 0xF030_0FFF
- *
- */
-#define CONFIG_SYS_OR3_PRELIM		0xFFF00000
-#define CONFIG_SYS_BR3_PRELIM		0xF0300000
-
-/*
- * BR4 and OR4 (External Bus CS3)
- * Base address = 0xF040_0000 - 0xF040_0FFF
- *
- */
-#define CONFIG_SYS_OR4_PRELIM		0xFFF00000
-#define CONFIG_SYS_BR4_PRELIM		0xF0400000
-
-
-/*
- * BR4 and OR4 (External Bus CS3)
- * Base address = 0xF050_0000 - 0xF050_0FFF
- *
- */
-#define CONFIG_SYS_OR5_PRELIM		0xFFF00000
-#define CONFIG_SYS_BR5_PRELIM		0xF0500000
-
-/*
- * BR6 and OR6 (Unused)
- * Base address = 0xF060_0000 - 0xF060_0FFF
- *
- */
-#define CONFIG_SYS_OR6_PRELIM		0xFFF00000
-#define CONFIG_SYS_BR6_PRELIM		0xF0600000
-
-/*
- * BR7 and OR7 (Unused)
- * Base address = 0xF070_0000 - 0xF070_0FFF
- *
- */
-#define CONFIG_SYS_OR7_PRELIM		0xFFF00000
-#define CONFIG_SYS_BR7_PRELIM		0xF0700000
-
-/*
- * Sanity checks
- */
-#if defined(CONFIG_SCC1_ENET) && defined(CONFIG_FEC_ENET)
-#error Both CONFIG_SCC1_ENET and CONFIG_FEC_ENET configured
-#endif
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/QS860T.h b/include/configs/QS860T.h
deleted file mode 100644
index 9958c09..0000000
--- a/include/configs/QS860T.h
+++ /dev/null
@@ -1,390 +0,0 @@
-/*
- * (C) Copyright 2003
- * MuLogic B.V.
- *
- * (C) Copyright 2002
- * Simple Network Magic Corporation
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/* various debug settings */
-#undef CONFIG_SYS_DEVICE_NULLDEV		/* null device */
-#undef CONFIG_SILENT_CONSOLE		/* silent console */
-#undef CONFIG_SYS_CONSOLE_INFO_QUIET		/* silent console ? */
-#undef DEBUG_FLASH			/* debug flash code */
-#undef FLASH_DEBUG			/* debug fash code */
-#undef DEBUG_ENV			/* debug environment code */
-
-#define CONFIG_SYS_DIRECT_FLASH_TFTP	1	/* allow direct tftp to flash */
-#define CONFIG_ENV_OVERWRITE	1	/* allow overwrite MAC address */
-
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC860		1	/* This is a MPC860 CPU */
-#define CONFIG_QS860T		1	/* ...on a QS860T module */
-
-/* Start address of 512K Socketed Flash */
-#define	CONFIG_SYS_TEXT_BASE	0xFFF00000
-
-#define CONFIG_FEC_ENET		1	/* FEC 10/100BaseT ethernet */
-#define CONFIG_MII
-#define FEC_INTERRUPT		SIU_LEVEL1
-#undef CONFIG_SCC1_ENET			/* SCC1 10BaseT ethernet */
-#define CONFIG_SYS_DISCOVER_PHY
-
-#undef CONFIG_8xx_CONS_SMC1
-#define CONFIG_8xx_CONS_SMC2	1	/* Console is on SMC */
-#undef CONFIG_8xx_CONS_NONE
-
-#define CONFIG_BAUDRATE		38400	/* console baudrate = 38.4kbps */
-
-#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds */
-
-/* Pass clocks to Linux 2.4.18 in Hz */
-#undef CONFIG_CLOCKS_IN_MHZ		/* clocks passsed to Linux in MHz */
-
-#define CONFIG_PREBOOT		"echo;" \
-	"echo 'Type \\\"run flash_nfs\\\" to mount root filesystem over NFS';" \
-	"echo"
-
-#undef CONFIG_BOOTARGS
-/* TODO compare against CADM860 */
-#define CONFIG_BOOTCOMMAND	"bootp; " \
-	"setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
-	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
-	"bootm"
-
-#define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
-#undef CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change */
-
-#undef CONFIG_WATCHDOG			/* watchdog disabled */
-
-#undef CONFIG_STATUS_LED		/* Status LED disabled */
-
-#undef CONFIG_CAN_DRIVER		/* CAN Driver support disabled */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-#define CONFIG_MAC_PARTITION
-#define CONFIG_DOS_PARTITION
-
-#define CONFIG_RTC_MPC8xx	/* use internal RTC of MPC8xx */
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_IMMAP
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DATE
-
-
-/* TODO */
-#if 0
-/* Look at these */
-CONFIG_IPADDR
-CONFIG_SERVERIP
-CONFIG_I2C
-CONFIG_SPI
-#endif
-
-/*
- * Environment variable storage is in NVRAM
- */
-#define CONFIG_ENV_IS_IN_NVRAM	1
-#define CONFIG_ENV_SIZE		0x00001000	/* We use only the last 4K for PPCBoot */
-#define CONFIG_ENV_ADDR		0xD100E000
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP				/* undef to save memory */
-
-#define CONFIG_SYS_HUSH_PARSER		1		/* use "hush" command parser */
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE		1024		/* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS		16		/* max number of command args */
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
-
-/* TODO - size? */
-#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works */
-#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
-
-/*-----------------------------------------------------------------------
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR		0xF0000000
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE	0x2F00		/* Size of used area in DPRAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_FLASH_BASE		0xFFF00000
-
-#define CONFIG_SYS_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor */
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc() */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
-
-/* TODO flash parameters */
-/*-----------------------------------------------------------------------
- * FLASH organization for Intel Strataflash
- */
-#define CONFIG_SYS_FLASH_16BIT		1		/* 16-bit wide flash memory */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT	64		/* max number of sectors on one chip */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	120000		/* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500		/* Timeout for Flash Write (in ms) */
-
-#undef	CONFIG_ENV_IS_IN_FLASH
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE	16		/* For all MPC8xx CPUs */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT	4		/* log base 2 of the above value */
-#endif
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control 11-9
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
- */
-#if defined(CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR	(0xFFFFFF88 | SYPCR_SWE | SYPCR_SWRI)
-#else
-#define CONFIG_SYS_SYPCR	0xFFFFFF88
-#endif
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration 11-6
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_SIUMCR	0x00620000
-
-/*-----------------------------------------------------------------------
- * TBSCR - Time Base Status and Control 11-26
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_TBSCR	0x00C3
-
-/*-----------------------------------------------------------------------
- * RTCSC - Real-Time Clock Status and Control Register 11-27
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control 11-31
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_PISCR	0x0082
-
-/*-----------------------------------------------------------------------
- * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_PLPRCR	0x0090D000
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock and reset Control Register		15-27
- *-----------------------------------------------------------------------
- */
-#define SCCR_MASK	SCCR_EBDF11
-#define CONFIG_SYS_SCCR	0x02000000
-
-
-/*-----------------------------------------------------------------------
- * Debug Enable Register
- * 0x73E67C0F - All interrupts handled by BDM
- * 0x00824001 - Only interrupts needed by MWDebug.exe handled by BDM
- *-----------------------------------------------------------------------
-#define CONFIG_SYS_DER			0x73E67C0F
-*/
-#define CONFIG_SYS_DER			0x0082400F
-
-
-/*-----------------------------------------------------------------------
- * Memory Controller Initialization Constants
- *-----------------------------------------------------------------------
- */
-
-/*
- * BR0 and OR0 (AMD 512K Socketed FLASH)
- * Base address = 0xFFF0_0000 - 0xFFF7_FFFF (After relocation)
- */
-#define CONFIG_SYS_PRELIM_OR_AM
-#define CONFIG_SYS_OR_TIMING_FLASH
-
-#define FLASH_BASE0_PRELIM	0xFFF00001
-#define CONFIG_SYS_OR0_PRELIM		0xFFF80D42
-#define CONFIG_SYS_BR0_PRELIM		0xFFF00401
-
-
-/*
- * BR1 and OR1 (Intel 8M StrataFLASH)
- * Base address = 0xD000_0000 - 0xD07F_FFFF
- */
-
-#define FLASH_BASE1_PRELIM	0xD0000000
-#define CONFIG_SYS_OR1_PRELIM		0xFF800D42
-#define CONFIG_SYS_BR1_PRELIM		0xD0000801
-/* #define CONFIG_SYS_OR1		0xFF800D42 */
-/* #define CONFIG_SYS_BR1		0xD0000801 */
-
-
-/*
- * BR2 and OR2 (SDRAM)
- * Base Address = 0x00000000 - 0x00FF_FFFF (16M After relocation)
- * Base Address = 0x00000000 - 0x03FF_FFFF (64M After relocation)
- * Base Address = 0x00000000 - 0x07FF_FFFF (128M After relocation)
- *
- */
-#define SDRAM_BASE		0x00000000	/* SDRAM bank */
-#define SDRAM_PRELIM_OR_AM	0xF8000000	/* map max. 128 MB */
-
-/* SDRAM timing */
-#define SDRAM_TIMING		0x00000A00
-
-/* For boards with 16M of SDRAM */
-#define SDRAM_16M_MAX_SIZE	0x01000000	/* max 16MB SDRAM */
-#define CONFIG_SYS_16M_MBMR		0x18802114	/* Mem Periodic Timer Prescaler */
-
-/* For boards with 64M of SDRAM */
-#define SDRAM_64M_MAX_SIZE	0x04000000	/* max 64MB SDRAM */
-/* TODO - determine real value */
-#define CONFIG_SYS_64M_MBMR		0x18802114	/* Mem Period Timer Prescaler */
-
-#define CONFIG_SYS_OR2			(SDRAM_PRELIM_OR_AM | SDRAM_TIMING)
-#define CONFIG_SYS_BR2			(SDRAM_BASE | 0x000000C1)
-
-
-/*
- * BR3 and OR3 (NVRAM, Sipex, NAND Flash)
- * Base address = 0xD100_0000 - 0xD100_FFFF (64K NVRAM)
- * Base address = 0xD108_0000 - 0xD108_0000 (Sipex chip ctl register)
- * Base address = 0xD110_0000 - 0xD110_0000 (NAND ctl register)
- * Base address = 0xD138_0000 - 0xD138_0000 (LED ctl register)
- *
- */
-
-#define CONFIG_SYS_OR3_PRELIM		0xFFC00DF6
-#define CONFIG_SYS_BR3_PRELIM		0xD1000401
-/* #define CONFIG_SYS_OR3		0xFFC00DF6 */
-/* #define CONFIG_SYS_BR3		0xD1000401 */
-
-
-/*
- * BR4 and OR4 (Unused)
- * Base address = 0xE000_0000 - 0xE3FF_FFFF
- *
- */
-
-#define CONFIG_SYS_OR4_PRELIM		0xFF000000
-#define CONFIG_SYS_BR4_PRELIM		0xE0000000
-/* #define CONFIG_SYS_OR4		0xFF000000 */
-/* #define CONFIG_SYS_BR4		0xE0000000 */
-
-
-/*
- * BR5 and OR5 (Expansion bus)
- * Base address = 0xE400_0000 - 0xE7FF_FFFF
- *
- */
-
-#define CONFIG_SYS_OR5_PRELIM		0xFF000000
-#define CONFIG_SYS_BR5_PRELIM		0xE4000000
-/* #define CONFIG_SYS_OR5		0xFF000000 */
-/* #define CONFIG_SYS_BR5		0xE4000000 */
-
-
-/*
- * BR6 and OR6 (Expansion bus)
- * Base address = 0xE800_0000 - 0xEBFF_FFFF
- *
- */
-
-#define CONFIG_SYS_OR6_PRELIM		0xFF000000
-#define CONFIG_SYS_BR6_PRELIM		0xE8000000
-/* #define CONFIG_SYS_OR6		0xFF000000 */
-/* #define CONFIG_SYS_BR6		0xE8000000 */
-
-
-/*
- * BR7 and OR7 (Expansion bus)
- * Base address = 0xEC00_0000 - 0xEFFF_FFFF
- *
- */
-
-#define CONFIG_SYS_OR7_PRELIM		0xFF000000
-#define CONFIG_SYS_BR7_PRELIM		0xE8000000
-/* #define CONFIG_SYS_OR7		0xFF000000 */
-/* #define CONFIG_SYS_BR7		0xE8000000 */
-
-/*
- * Sanity checks
- */
-#if defined(CONFIG_SCC1_ENET) && defined(CONFIG_FEC_ENET)
-#error Both CONFIG_SCC1_ENET and CONFIG_FEC_ENET configured
-#endif
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/RBC823.h b/include/configs/RBC823.h
deleted file mode 100644
index e7e061c..0000000
--- a/include/configs/RBC823.h
+++ /dev/null
@@ -1,407 +0,0 @@
-/*
- * (C) Copyright 2000, 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Modified by Udi Finkelstein udif@udif.com
- * For the RBC823 board.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC823		1	/* This is a MPC823 CPU		*/
-#define CONFIG_RBC823		1	/* ...on a RBC823 module	*/
-
-#define	CONFIG_SYS_TEXT_BASE	0xFFF00000
-
-#if 0
-#define DEBUG			1
-#define CONFIG_LAST_STAGE_INIT
-#endif
-#define CONFIG_KEYBOARD		1	/* This board has a custom keybpard */
-#define CONFIG_LCD		1	/* use LCD controller ...	*/
-#define CONFIG_MPC8XX_LCD
-#define CONFIG_HITACHI_SP19X001_Z1A	/* The LCD type we use */
-
-#define	CONFIG_8xx_CONS_SMC2	1	/* Console is on SMC2		*/
-#undef	CONFIG_8xx_CONS_SMC1
-#undef	CONFIG_8xx_CONS_NONE
-#define CONFIG_BAUDRATE		115200	/* console baudrate = 115kbps	*/
-#if 1
-#define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
-#else
-#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
-#endif
-
-#define	CONFIG_CLOCKS_IN_MHZ	1	/* clocks passsed to Linux in MHz */
-#define CONFIG_8xx_GCLK_FREQ    48000000L
-
-#define CONFIG_PREBOOT	"echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo"
-
-#undef	CONFIG_BOOTARGS
-#define CONFIG_BOOTCOMMAND							\
-	"bootp; "								\
-	"setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} "	\
-	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; "	\
-	"bootm"
-
-#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
-
-#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
-
-#define CONFIG_STATUS_LED	1	/* Status LED enabled		*/
-
-#undef	CONFIG_CAN_DRIVER		/* CAN Driver support disabled	*/
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-#undef CONFIG_MAC_PARTITION
-#define CONFIG_DOS_PARTITION
-
-#undef	CONFIG_RTC_MPC8xx		/* don't use internal RTC of MPC8xx (no battery)	*/
-
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED 40000
-#define CONFIG_SYS_I2C_SLAVE 0xfe
-#define CONFIG_SYS_I2C_EEPROM_ADDR		0x50
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
-#define CONFIG_SYS_EEPROM_WRITE_BITS		4
-#define CONFIG_SYS_EEPROM_WRITE_DELAY_MS	10
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_BEDBUG
-#define CONFIG_CMD_BMP
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_CDP
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_IMMAP
-#define CONFIG_CMD_KGDB
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_PORTIO
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_SAVES
-#define CONFIG_CMD_SDRAM
-
-#undef CONFIG_CMD_SETGETDCR
-#undef CONFIG_CMD_XIMG
-
-/*
- * Miscellaneous configurable options
- */
-#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
-#if defined(CONFIG_CMD_KGDB)
-#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
-#else
-#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
-#endif
-#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-
-#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
-
-#define	CONFIG_SYS_LOAD_ADDR		0x0100000	/* default load address	*/
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR		0xFF000000
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
-#define	CONFIG_SYS_INIT_RAM_SIZE	0x2F00	/* Size of used area in DPRAM	*/
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define	CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_FLASH_BASE		0xFFF00000
-#if defined(DEBUG)
-#define	CONFIG_SYS_MONITOR_LEN		(384 << 10)	/* Reserve 256 kB for Monitor	*/
-#else
-#define	CONFIG_SYS_MONITOR_LEN		(384 << 10)	/* Reserve 192 kB for Monitor	*/
-#endif
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
-#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CONFIG_SYS_MAX_FLASH_SECT	67	/* max number of sectors on one chip	*/
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
-
-#define	CONFIG_ENV_IS_IN_FLASH	1
-#define	CONFIG_ENV_OFFSET		0x10000	/*   Offset   of Environment Sector	*/
-#define	CONFIG_ENV_SIZE		0x10000	/* Total Size of Environment Sector	*/
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
-#endif
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control				11-9
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
- */
-#if defined(CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
-			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
-#else
-/*
-#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
-*/
-#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWRI | SYPCR_SWP)
-#endif
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration				11-6
- *-----------------------------------------------------------------------
- * PCMCIA config., multi-function pin tri-state
- */
-#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC00 | SIUMCR_FRC)
-
-/*-----------------------------------------------------------------------
- * TBSCR - Time Base Status and Control				11-26
- *-----------------------------------------------------------------------
- * Clear Reference Interrupt Status, Timebase freezing enabled
- */
-#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
-
-/*-----------------------------------------------------------------------
- * RTCSC - Real-Time Clock Status and Control Register		11-27
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control		11-31
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
- */
-#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
-
-/*-----------------------------------------------------------------------
- * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
- *-----------------------------------------------------------------------
- * Reset PLL lock status sticky bit, timer expired status bit and timer
- * interrupt status bit
- *
- */
-
-/*
- * for 48 MHz, we use a 4 MHz clock * 12
- */
-#define CONFIG_SYS_PLPRCR							\
-		( (12-1)<<PLPRCR_MF_SHIFT | PLPRCR_TEXPS | PLPRCR_LOLRE )
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock and reset Control Register		15-27
- *-----------------------------------------------------------------------
- * Set clock output, timebase and RTC source and divider,
- * power management and some other internal clocks
- */
-#define SCCR_MASK	SCCR_EBDF11
-#define CONFIG_SYS_SCCR	(SCCR_RTDIV   | SCCR_RTSEL    | SCCR_CRQEN    | \
-			 SCCR_PRQEN   | SCCR_EBDF00   | \
-			 SCCR_COM01   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
-			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD001 | \
-			 SCCR_DFALCD00)
-
-#ifdef NOT_USED
-/*-----------------------------------------------------------------------
- * PCMCIA stuff
- *-----------------------------------------------------------------------
- *
- */
-#define CONFIG_SYS_PCMCIA_MEM_ADDR	(0xE0000000)
-#define CONFIG_SYS_PCMCIA_MEM_SIZE	( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_DMA_ADDR	(0xE4000000)
-#define CONFIG_SYS_PCMCIA_DMA_SIZE	( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_ATTRB_ADDR	(0xE8000000)
-#define CONFIG_SYS_PCMCIA_ATTRB_SIZE	( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_IO_ADDR	(0xEC000000)
-#define CONFIG_SYS_PCMCIA_IO_SIZE	( 64 << 20 )
-
-/*-----------------------------------------------------------------------
- * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
- *-----------------------------------------------------------------------
- */
-
-#define	CONFIG_IDE_PCCARD	1	/* Use IDE with PC Card	Adapter	*/
-
-#undef	CONFIG_IDE_PCMCIA		/* Direct IDE    not supported	*/
-#undef	CONFIG_IDE_LED			/* LED   for ide not supported	*/
-#undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
-
-#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
-
-#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
-
-#define CONFIG_SYS_ATA_BASE_ADDR	CONFIG_SYS_PCMCIA_MEM_ADDR
-
-/* Offset for data I/O			*/
-#define CONFIG_SYS_ATA_DATA_OFFSET	(CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
-
-/* Offset for normal register accesses	*/
-#define CONFIG_SYS_ATA_REG_OFFSET	(2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
-
-/* Offset for alternate registers	*/
-#define CONFIG_SYS_ATA_ALT_OFFSET	0x0100
-
-#endif
-
-/*-----------------------------------------------------------------------
- *
- *-----------------------------------------------------------------------
- *
- */
-/*#define	CONFIG_SYS_DER	0x2002000F*/
-#define CONFIG_SYS_DER	0
-
-/*
- * Init Memory Controller:
- *
- * BR0/1 and OR0/1 (FLASH)
- */
-
-#define FLASH_BASE0_PRELIM	0xFFF00000	/* FLASH bank #0	*/
-#define FLASH_BASE1_PRELIM	0x04000000	/* D.O.C Millenium	*/
-
-/* used to re-map FLASH both when starting from SRAM or FLASH:
- * restrict access enough to keep SRAM working (if any)
- * but not too much to meddle with FLASH accesses
- */
-#define CONFIG_SYS_PRELIM_OR_AM	0xFFF80000	/* OR addr mask */
-
-/* FLASH timing: ACS = 00, TRLX = 0, CSNT = 1, SCY = 7, EHTR = 1	*/
-#define CONFIG_SYS_OR_TIMING_FLASH  (OR_ACS_DIV1 | OR_BI | OR_SCY_7_CLK | OR_EHTR)
-
-#define CONFIG_SYS_OR_TIMING_MSYS   (OR_ACS_DIV1 | OR_BI)
-
-#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V)
-
-#define CONFIG_SYS_OR1_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_MSYS)
-#define CONFIG_SYS_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_MS_UPMB | \
-			  BR_PS_8 | BR_V)
-
-/*
- * BR4 and OR4 (SDRAM)
- *
- */
-#define SDRAM_BASE4_PRELIM	0x00000000	/* SDRAM bank #0	*/
-#define	SDRAM_MAX_SIZE		0x04000000	/* max 64 MB per bank	*/
-
-/*
- * SDRAM timing:
- */
-#define CONFIG_SYS_OR_TIMING_SDRAM	(OR_CSNT_SAM)
-
-#define CONFIG_SYS_OR4_PRELIM	(~(SDRAM_MAX_SIZE-1) | CONFIG_SYS_OR_TIMING_SDRAM )
-#define CONFIG_SYS_BR4_PRELIM	((SDRAM_BASE4_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
-
-/*
- * Memory Periodic Timer Prescaler
- */
-
-/* periodic timer for refresh */
-#define CONFIG_SYS_MAMR_PTA	187		/* start with divider for 48 MHz	*/
-
-/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit	*/
-#define CONFIG_SYS_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
-#define CONFIG_SYS_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
-
-/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
-#define CONFIG_SYS_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
-#define CONFIG_SYS_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
-
-/*
- * MAMR settings for SDRAM
- */
-
-/* 8 column SDRAM */
-#define CONFIG_SYS_MAMR_8COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
-			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
-			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
-/* 9 column SDRAM */
-#define CONFIG_SYS_MAMR_9COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
-			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
-			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
-
-/*
- * JFFS2 partitions
- *
- */
-/* No command line, one static partition, whole device */
-#undef CONFIG_CMD_MTDPARTS
-#define CONFIG_JFFS2_DEV		"nor0"
-#define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
-#define CONFIG_JFFS2_PART_OFFSET	0x00000000
-
-/* mtdparts command line support */
-/* Note: fake mtd_id used, no linux mtd map file */
-/*
-#define CONFIG_CMD_MTDPARTS
-#define MTDIDS_DEFAULT		""
-#define MTDPARTS_DEFAULT	""
-*/
-
-#endif	/* __CONFIG_H */
diff --git a/include/configs/RPXlite_DW.h b/include/configs/RPXlite_DW.h
deleted file mode 100644
index 50c82c6..0000000
--- a/include/configs/RPXlite_DW.h
+++ /dev/null
@@ -1,462 +0,0 @@
-/*
- * (C) Copyright 2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- * Sam Song, IEMC. SHU, samsongshu@yahoo.com.cn
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-/* Yoo. Jonghoon, IPone, yooth@ipone.co.kr
- * U-BOOT port on RPXlite board
- */
-
-/*
- * Sam Song, IEMC. SHU, samsongshu@yahoo.com.cn
- * U-BOOT port on RPXlite DW version board--RPXlite_DW
- * June 8 ,2004
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-/* #define DEBUG	1 */
-/* #define DEPLOYMENT	1 */
-
-#undef	CONFIG_MPC860
-#define CONFIG_MPC823		1	/* This is a MPC823e CPU. */
-#define CONFIG_RPXLITE		1	/* RPXlite DW version board */
-
-#define	CONFIG_SYS_TEXT_BASE	0xff000000
-
-#ifdef	CONFIG_LCD			/* with LCD controller ?	*/
-#define CONFIG_MPC8XX_LCD
-#define CONFIG_SPLASH_SCREEN		/* ... with splashscreen support*/
-#endif
-
-#define CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		*/
-#undef	CONFIG_8xx_CONS_SMC2
-#undef	CONFIG_8xx_CONS_NONE
-#define CONFIG_BAUDRATE		9600	/* console default baudrate = 9600bps	*/
-
-#ifdef DEBUG
-#define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
-#else
-#define CONFIG_BOOTDELAY	6	/* autoboot after 6 seconds	*/
-
-#ifdef DEPLOYMENT
-#define CONFIG_BOOT_RETRY_TIME		-1
-#define CONFIG_AUTOBOOT_KEYED
-#define CONFIG_AUTOBOOT_PROMPT		\
-	"autoboot in %d seconds (stop with 'st')...\n", bootdelay
-#define CONFIG_AUTOBOOT_STOP_STR	"st"
-#define CONFIG_ZERO_BOOTDELAY_CHECK
-#define CONFIG_RESET_TO_RETRY		1
-#define CONFIG_BOOT_RETRY_MIN		1
-#endif	/* DEPLOYMENT */
-#endif	/* DEBUG */
-
-/* pre-boot commands */
-#define CONFIG_PREBOOT		"setenv stdout serial;setenv stdin serial"
-
-#undef	CONFIG_BOOTARGS
-#define CONFIG_EXTRA_ENV_SETTINGS					\
-	"netdev=eth0\0"							\
-	"nfsargs=setenv bootargs console=tty0 console=ttyS0,9600 "	\
-		"root=/dev/nfs rw nfsroot=${serverip}:${rootpath}\0"	\
-	"ramargs=setenv bootargs console=tty0 root=/dev/ram rw\0"	\
-	"addip=setenv bootargs ${bootargs} "				\
-		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
-		":${hostname}:${netdev}:off panic=1\0"			\
-	"flash_nfs=run nfsargs addip;"					\
-		"bootm ${kernel_addr}\0"				\
-	"flash_self=run ramargs addip;"					\
-		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
-	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
-	"gatewayip=172.16.115.254\0"					\
-	"netmask=255.255.255.0\0"					\
-	"kernel_addr=ff040000\0"					\
-	"ramdisk_addr=ff200000\0"					\
-	"ku=era ${kernel_addr} ff1fffff;cp.b 100000 ${kernel_addr} "	\
-		"${filesize};md ${kernel_addr};"			\
-		"echo kernel updating finished\0"			\
-	"uu=protect off 1:0-4;era 1:0-4;cp.b 100000 ff000000 "		\
-		"${filesize};md ff000000;"				\
-		"echo u-boot updating finished\0"			\
-	"eu=protect off 1:6;era 1:6;reset\0"				\
-	"lcd=setenv stdout lcd;setenv stdin lcd\0"			\
-	"ser=setenv stdout serial;setenv stdin serial\0"		\
-	"verify=no"
-
-#define CONFIG_BOOTCOMMAND	"run flash_self"
-
-#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
-#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
-#undef	CONFIG_STATUS_LED		/* disturbs display. Status LED disabled. */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-#if 1	       /* Enable this stuff could make image enlarge about 25KB. Mask it if you
-		  don't want the advanced function */
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_DHCP
-
-#ifdef	CONFIG_SPLASH_SCREEN
-#define CONFIG_CMD_BMP
-#endif
-
-
-/* test-only */
-#define CONFIG_SYS_JFFS2_FIRST_BANK	0	    /* use for JFFS2 */
-#define CONFIG_SYS_JFFS2_NUM_BANKS	1	    /* ! second bank contains U-Boot */
-
-#define CONFIG_NETCONSOLE
-
-#endif	/* 1 */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
-#define CONFIG_SYS_PROMPT	"u-boot>"	/* Monitor Command Prompt   */
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
-#else
-#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
-#endif
-
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-
-#define CONFIG_SYS_MEMTEST_START	0x0040000	/* memtest works on	*/
-#define CONFIG_SYS_MEMTEST_END		0x00C0000	/* 4 ... 12 MB in DRAM	*/
-#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR		0xFA200000
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE	0x2F00		/* Size of used area in DPRAM	*/
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_FLASH_BASE		0xFF000000
-
-#if defined(DEBUG) || defined(CONFIG_CMD_IDE)
-#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#else
-#define CONFIG_SYS_MONITOR_LEN		(128 << 10)	/* Reserve 128 kB for Monitor */
-#endif
-
-#define CONFIG_SYS_MONITOR_BASE	0xFF000000
-#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CONFIG_SYS_MAX_FLASH_SECT	71	/* max number of sectors on one chip	*/
-#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
-
-#ifdef	CONFIG_ENV_IS_IN_NVRAM
-#define CONFIG_ENV_ADDR		0xFA000100
-#define CONFIG_ENV_SIZE		0x1000
-#else
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_OFFSET		0x30000 /* Offset of Environment Sector		*/
-#define CONFIG_ENV_SIZE		0x8000	/* Total Size of Environment Sector	*/
-#endif	/* CONFIG_ENV_IS_IN_NVRAM */
-
-#define CONFIG_SYS_RESET_ADDRESS	((ulong)((((immap_t *)CONFIG_SYS_IMMR)->im_clkrst.res)))
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
-#endif
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control	32-bit			12-35
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
- */
-#if defined(CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
-			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
-#else
-#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | 0x00000600 | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
-#endif	/* We can get SYPCR: 0xFFFF0689. */
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration	32-bit			 12-30
- *-----------------------------------------------------------------------
- * PCMCIA config., multi-function pin tri-state
- */
-#define CONFIG_SYS_SIUMCR	(SIUMCR_MLRC10)	       /* SIUMCR:0x00000800 */
-
-/*---------------------------------------------------------------------
- * TBSCR - Time Base Status and Control	 16-bit			 12-16
- *---------------------------------------------------------------------
- * Clear Reference Interrupt Status, Timebase freezing enabled
- */
-#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF | TBSCR_TBE)
-/* TBSCR: 0x00C3 [SAM] */
-
-/*-----------------------------------------------------------------------
- * RTCSC - Real-Time Clock Status and Control Register 16-bit	 12-18
- *-----------------------------------------------------------------------
- * [RTC enabled but not stopped on FRZ]
- */
-#define CONFIG_SYS_RTCSC    (RTCSC_SEC | RTCSC_ALR | RTCSC_RTE) /* RTCSC:0x00C1	*/
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control 16-bit		 12-23
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
- * [Periodic timer enabled,Periodic timer interrupt disable. ]
- */
-#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF | PISCR_PTE)  /* PISCR:0x0083		*/
-
-/*-----------------------------------------------------------------------
- * PLPRCR - PLL, Low-Power, and Reset Control Register	32-bit	 5-7
- *-----------------------------------------------------------------------
- * Reset PLL lock status sticky bit, timer expired status bit and timer
- * interrupt status bit
- */
-/* up to 64 MHz we use a 1:2 clock */
-#if defined(RPXlite_64MHz)
-#define CONFIG_SYS_PLPRCR	( (7 << PLPRCR_MF_SHIFT) | PLPRCR_TEXPS )   /*PLPRCR: 0x00700000. */
-#else
-#define CONFIG_SYS_PLPRCR	( (5 << PLPRCR_MF_SHIFT) | PLPRCR_TEXPS )
-#endif
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock and reset Control Register		5-3
- *-----------------------------------------------------------------------
- * Set clock output, timebase and RTC source and divider,
- * power management and some other internal clocks
- */
-#define SCCR_MASK	SCCR_EBDF00
-/* Up to 48MHz system clock, we use 1:1 SYSTEM/BUS ratio */
-#if defined(RPXlite_64MHz)
-#define CONFIG_SYS_SCCR	( SCCR_TBS | SCCR_EBDF01 )  /* %%%SCCR:0x02020000 */
-#else
-#define CONFIG_SYS_SCCR	( SCCR_TBS | SCCR_EBDF00 )  /* %%%SCCR:0x02000000 */
-#endif
-
-/*-----------------------------------------------------------------------
- * PCMCIA stuff
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_PCMCIA_MEM_ADDR	(0xE0000000)
-#define CONFIG_SYS_PCMCIA_MEM_SIZE	( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_DMA_ADDR	(0xE4000000)
-#define CONFIG_SYS_PCMCIA_DMA_SIZE	( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_ATTRB_ADDR	(0xE8000000)
-#define CONFIG_SYS_PCMCIA_ATTRB_SIZE	( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_IO_ADDR	(0xEC000000)
-#define CONFIG_SYS_PCMCIA_IO_SIZE	( 64 << 20 )
-
-/*-----------------------------------------------------------------------
- * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
- *-----------------------------------------------------------------------
- */
-#define CONFIG_IDE_PREINIT	1	/* Use preinit IDE hook */
-#define CONFIG_IDE_8xx_PCCARD	1	/* Use IDE with PC Card Adapter */
-
-#undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE	 not supported	*/
-#undef	CONFIG_IDE_LED			/* LED	 for ide not supported	*/
-#undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
-
-#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
-
-#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
-#define CONFIG_SYS_ATA_BASE_ADDR	CONFIG_SYS_PCMCIA_MEM_ADDR
-
-/* Offset for data I/O			*/
-#define CONFIG_SYS_ATA_DATA_OFFSET	(CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
-
-/* Offset for normal register accesses	*/
-#define CONFIG_SYS_ATA_REG_OFFSET	(2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
-
-/* Offset for alternate registers	*/
-#define CONFIG_SYS_ATA_ALT_OFFSET	0x0100
-
-#define		CONFIG_SYS_DER		0
-
-/*
- * Init Memory Controller:
- *
- * BR0 and OR0 (FLASH)
- */
-#define FLASH_BASE_PRELIM	0xFC000000	/* FLASH base	*/
-#define CONFIG_SYS_PRELIM_OR_AM	0xFC000000	/* OR addr mask */
-
-/* FLASH timing: ACS = 0, TRLX = 0, CSNT = 0, SCY = 8, ETHR = 0, BIH = 1 */
-#define CONFIG_SYS_OR_TIMING_FLASH (OR_SCY_8_CLK | OR_BI)
-#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE_PRELIM & BR_BA_MSK) | BR_V)
-
-/*
- * BR1 and OR1 (SDRAM)
- *
- */
-#define SDRAM_BASE_PRELIM	0x00000000	/* SDRAM base	*/
-#define SDRAM_MAX_SIZE		0x08000000	/* max 128 MB in system */
-
-/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
-#define CONFIG_SYS_OR_TIMING_SDRAM	0x00000E00
-#define CONFIG_SYS_OR_AM_SDRAM		(-(SDRAM_MAX_SIZE & OR_AM_MSK))
-#define CONFIG_SYS_OR1_PRELIM	( CONFIG_SYS_OR_AM_SDRAM | CONFIG_SYS_OR_TIMING_SDRAM )
-#define CONFIG_SYS_BR1_PRELIM	((SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
-
-/* RPXlite mem setting */
-#define CONFIG_SYS_BR3_PRELIM	0xFA400001		/* BCSR */
-#define CONFIG_SYS_OR3_PRELIM	0xFF7F8900
-#define CONFIG_SYS_BR4_PRELIM	0xFA000401		/* NVRAM&SRAM */
-#define CONFIG_SYS_OR4_PRELIM	0xFFFE0040
-
-/*
- * Memory Periodic Timer Prescaler
- */
-/* periodic timer for refresh */
-#if defined(RPXlite_64MHz)
-#define CONFIG_SYS_MAMR_PTA	32
-#else
-#define CONFIG_SYS_MAMR_PTA	20
-#endif
-
-/*
- * Refresh clock Prescalar
- */
-#define CONFIG_SYS_MPTPR	MPTPR_PTP_DIV2
-
-/*
- * MAMR settings for SDRAM
- */
-
-/* 9 column SDRAM */
-#define CONFIG_SYS_MAMR_9COL  ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE | \
-			MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10)
-/* CONFIG_SYS_MAMR_9COL:0x20904000 @ 64MHz */
-
-/*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% */
-/* Configuration variable added by yooth. */
-/*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% */
-/*
- * BCSRx
- *
- * Board Status and Control Registers
- *
- */
-#define BCSR0 0xFA400000
-#define BCSR1 0xFA400001
-#define BCSR2 0xFA400002
-#define BCSR3 0xFA400003
-
-#define BCSR0_ENMONXCVR 0x01	/* Monitor XVCR Control */
-#define BCSR0_ENNVRAM	0x02	/* CS4# Control */
-#define BCSR0_LED5	0x04	/* LED5 control 0='on' 1='off' */
-#define BCSR0_LED4	0x08	/* LED4 control 0='on' 1='off' */
-#define BCSR0_FULLDPLX	0x10	/* Ethernet XCVR Control */
-#define BCSR0_COLTEST	0x20
-#define BCSR0_ETHLPBK	0x40
-#define BCSR0_ETHEN	0x80
-
-#define BCSR1_PCVCTL7	0x01	/* PC Slot B Control */
-#define BCSR1_PCVCTL6	0x02
-#define BCSR1_PCVCTL5	0x04
-#define BCSR1_PCVCTL4	0x08
-#define BCSR1_IPB5SEL	0x10
-
-#define BCSR1_SMC1CTS	0x40	/* Added by SAM. */
-#define BCSR1_SMC1TRS	0x80	/* Added by SAM. */
-
-#define BCSR2_ENRTCIRQ	0x01	/* Added by SAM. */
-#define BCSR2_ENBRG1	0x04	/* Added by SAM. */
-
-#define BCSR2_ENPA5HDR	0x08	/* USB Control */
-#define BCSR2_ENUSBCLK	0x10
-#define BCSR2_USBPWREN	0x20
-#define BCSR2_USBSPD	0x40
-#define BCSR2_USBSUSP	0x80
-
-#define BCSR3_BWKAPWR	0x01   /* Changed by SAM. Backup battery situation */
-#define BCSR3_IRQRTC	0x02   /* Changed by SAM. NVRAM Battery */
-#define BCSR3_RDY_BSY	0x04   /* Changed by SAM. Flash Operation */
-#define BCSR3_MPLX_LIN	0x08   /* Changed by SAM. Linear or Multiplexed address Mode */
-
-#define BCSR3_D27	0x10	  /* Dip Switch settings */
-#define BCSR3_D26	0x20
-#define BCSR3_D25	0x40
-#define BCSR3_D24	0x80
-
-/*
- * Environment setting
- */
-#define CONFIG_ETHADDR	00:10:EC:00:37:5B
-#define CONFIG_IPADDR	172.16.115.7
-#define CONFIG_SERVERIP 172.16.115.6
-#define CONFIG_ROOTPATH "/workspace/myfilesystem/target/"
-#define CONFIG_BOOTFILE "uImage.rpxusb"
-#define CONFIG_HOSTNAME LITE_H1_DW
-
-#endif	/* __CONFIG_H */
diff --git a/include/configs/Rattler.h b/include/configs/Rattler.h
deleted file mode 100644
index a1e2ae9..0000000
--- a/include/configs/Rattler.h
+++ /dev/null
@@ -1,279 +0,0 @@
-/*
- * Copyright (C) 2004 Arabella Software Ltd.
- * Yuli Barcohen <yuli@arabellasw.com>
- *
- * U-Boot configuration for Analogue&Micro Rattler boards.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#ifdef CONFIG_MPC8248
-#define CPU_ID_STR		"MPC8248"
-#else
-#define CPU_ID_STR		"MPC8250"
-#endif /* CONFIG_MPC8248 */
-
-#define	CONFIG_SYS_TEXT_BASE	0xFE000000
-
-#define CONFIG_CPM2		1	/* Has a CPM2 */
-
-#define CONFIG_RATTLER			/* Analogue&Micro Rattler board */
-
-/* Allow serial number (serial#) and MAC address (ethaddr) to be overwritten */
-#define CONFIG_ENV_OVERWRITE
-
-/*
- * Select serial console configuration
- *
- * If either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
- * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
- * for SCC).
- */
-#define	CONFIG_CONS_ON_SMC		/* Console is on SMC         */
-#undef  CONFIG_CONS_ON_SCC		/* It's not on SCC           */
-#undef	CONFIG_CONS_NONE		/* It's not on external UART */
-#define CONFIG_CONS_INDEX	1	/* SMC1 is used for console  */
-
-/*
- * Select ethernet configuration
- *
- * If either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected,
- * then CONFIG_ETHER_INDEX must be set to the channel number (1-4 for
- * SCC, 1-3 for FCC)
- *
- * If CONFIG_ETHER_NONE is defined, then either the ethernet routines
- * must be defined elsewhere (as for the console), or CONFIG_CMD_NET
- * must be unset.
- */
-#undef	CONFIG_ETHER_ON_SCC		/* Ethernet is not on SCC */
-#define CONFIG_ETHER_ON_FCC		/* Ethernet is on FCC     */
-#undef	CONFIG_ETHER_NONE		/* No external Ethernet   */
-
-#ifdef CONFIG_ETHER_ON_FCC
-
-#define CONFIG_ETHER_INDEX	1	/* FCC1 is used for Ethernet */
-
-#if   (CONFIG_ETHER_INDEX == 1)
-
-/* - Rx clock is CLK11
- * - Tx clock is CLK10
- * - BDs/buffers on 60x bus
- * - Full duplex
- */
-#define CONFIG_SYS_CMXFCR_MASK1		(CMXFCR_FC1 | CMXFCR_RF1CS_MSK | CMXFCR_TF1CS_MSK)
-#define CONFIG_SYS_CMXFCR_VALUE1	(CMXFCR_RF1CS_CLK11 | CMXFCR_TF1CS_CLK10)
-#define CONFIG_SYS_CPMFCR_RAMTYPE	0
-#define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
-
-#elif (CONFIG_ETHER_INDEX == 2)
-
-/* - Rx clock is CLK15
- * - Tx clock is CLK14
- * - BDs/buffers on 60x bus
- * - Full duplex
- */
-#define CONFIG_SYS_CMXFCR_MASK2		(CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
-#define CONFIG_SYS_CMXFCR_VALUE2	(CMXFCR_RF2CS_CLK15 | CMXFCR_TF2CS_CLK14)
-#define CONFIG_SYS_CPMFCR_RAMTYPE	0
-#define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
-
-#endif /* CONFIG_ETHER_INDEX */
-
-#define CONFIG_MII			/* MII PHY management        */
-#define CONFIG_BITBANGMII		/* Bit-banged MDIO interface */
-/*
- * GPIO pins used for bit-banged MII communications
- */
-#define MDIO_PORT		2	/* Port C */
-#define MDIO_DECLARE		volatile ioport_t *iop = ioport_addr ( \
-					(immap_t *) CONFIG_SYS_IMMR, MDIO_PORT )
-#define MDC_DECLARE		MDIO_DECLARE
-
-#define MDIO_ACTIVE		(iop->pdir |=  0x00400000)
-#define MDIO_TRISTATE		(iop->pdir &= ~0x00400000)
-#define MDIO_READ		((iop->pdat &  0x00400000) != 0)
-
-#define MDIO(bit)		if(bit) iop->pdat |=  0x00400000; \
-				else	iop->pdat &= ~0x00400000
-
-#define MDC(bit)		if(bit) iop->pdat |=  0x00800000; \
-				else	iop->pdat &= ~0x00800000
-
-#define MIIDELAY		udelay(1)
-
-#endif /* CONFIG_ETHER_ON_FCC */
-
-#ifndef CONFIG_8260_CLKIN
-#define CONFIG_8260_CLKIN	100000000	/* in Hz */
-#endif
-
-#define CONFIG_BAUDRATE		38400
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_IMMAP
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-
-
-#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds */
-#define CONFIG_BOOTCOMMAND	"bootm FE040000"	/* autoboot command */
-#define CONFIG_BOOTARGS		"root=/dev/mtdblock2 rw mtdparts=phys:1M(ROM)ro,-(root)"
-
-#if defined(CONFIG_CMD_KGDB)
-#undef	CONFIG_KGDB_ON_SMC		/* define if kgdb on SMC */
-#define CONFIG_KGDB_ON_SCC		/* define if kgdb on SCC */
-#undef	CONFIG_KGDB_NONE		/* define if kgdb on something else */
-#define CONFIG_KGDB_INDEX	2	/* which serial channel for kgdb */
-#define CONFIG_KGDB_BAUDRATE	115200	/* speed to run kgdb serial port at */
-#endif
-
-#define CONFIG_BZIP2	/* include support for bzip2 compressed images */
-#undef	CONFIG_WATCHDOG			/* disable platform specific watchdog */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_LONGHELP			/* undef to save memory	    */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size  */
-#else
-#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size  */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size  */
-#define CONFIG_SYS_MAXARGS		16		/* max number of command args */
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size  */
-
-#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on */
-#define CONFIG_SYS_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
-
-#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
-
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
-
-#define CONFIG_SYS_FLASH_BASE		0xFE000000
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of flash banks	*/
-#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max num of sects on one chip */
-
-#define	CONFIG_SYS_DIRECT_FLASH_TFTP
-
-#if defined(CONFIG_CMD_JFFS2)
-#define CONFIG_SYS_JFFS2_NUM_BANKS	CONFIG_SYS_MAX_FLASH_BANKS
-#define CONFIG_SYS_JFFS2_SORT_FRAGMENTS
-
-/*
- * JFFS2 partitions
- *
- */
-/* No command line, one static partition */
-#undef CONFIG_CMD_MTDPARTS
-#define CONFIG_JFFS2_DEV		"nor0"
-#define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
-#define CONFIG_JFFS2_PART_OFFSET	0x00100000
-
-/* mtdparts command line support */
-/* Note: fake mtd_id used, no linux mtd map file */
-/*
-#define CONFIG_CMD_MTDPARTS
-#define MTDIDS_DEFAULT		"nor0=rattler-0"
-#define MTDPARTS_DEFAULT	"mtdparts=rattler-0:-@1m(jffs2)"
-*/
-#endif /* CONFIG_CMD_JFFS2 */
-
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-#define CONFIG_SYS_RAMBOOT
-#endif
-
-#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-
-#define CONFIG_ENV_IS_IN_FLASH
-
-#ifdef CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_SECT_SIZE	0x10000
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
-#endif /* CONFIG_ENV_IS_IN_FLASH */
-
-#define CONFIG_SYS_DEFAULT_IMMR	0xFF010000
-
-#define CONFIG_SYS_IMMR		0xF0000000
-
-#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE	0x2000	/* Size of used area in DPRAM	*/
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-#define CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_SDRAM_SIZE		32
-#define CONFIG_SYS_SDRAM_BR		(CONFIG_SYS_SDRAM_BASE | 0x00000041)
-#define CONFIG_SYS_SDRAM_OR		0xFE002EC0
-
-#define CONFIG_SYS_BCSR		0xFC000000
-
-/* Hard reset configuration word */
-#define CONFIG_SYS_HRCW_MASTER		0x0A06875A /* Not used - provided by FPGA */
-/* No slaves */
-#define CONFIG_SYS_HRCW_SLAVE1		0
-#define CONFIG_SYS_HRCW_SLAVE2		0
-#define CONFIG_SYS_HRCW_SLAVE3		0
-#define CONFIG_SYS_HRCW_SLAVE4		0
-#define CONFIG_SYS_HRCW_SLAVE5		0
-#define CONFIG_SYS_HRCW_SLAVE6		0
-#define CONFIG_SYS_HRCW_SLAVE7		0
-
-#define CONFIG_SYS_MALLOC_LEN		(4096 << 10)	/* Reserve 4 MB for malloc()	*/
-#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
-
-#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC8260 CPUs */
-#if defined(CONFIG_CMD_KGDB)
-#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
-#endif
-
-#define CONFIG_SYS_HID0_INIT		0
-#define CONFIG_SYS_HID0_FINAL		(HID0_ICE | HID0_IFEM | HID0_ABE)
-
-#define CONFIG_SYS_HID2		0
-
-#define CONFIG_SYS_SIUMCR		0x0E04C000
-#define CONFIG_SYS_SYPCR		0xFFFFFFC3
-#define CONFIG_SYS_BCR			0x00000000
-#define CONFIG_SYS_SCCR		SCCR_DFBRG01
-
-#define CONFIG_SYS_RMR			RMR_CSRE
-#define CONFIG_SYS_TMCNTSC		(TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
-#define CONFIG_SYS_PISCR		(PISCR_PS|PISCR_PTF|PISCR_PTE)
-#define CONFIG_SYS_RCCR		0
-
-#define CONFIG_SYS_PSDMR		0x8249A452
-#define CONFIG_SYS_PSRT		0x1F
-#define CONFIG_SYS_MPTPR		0x2000
-
-#define CONFIG_SYS_BR0_PRELIM		(CONFIG_SYS_FLASH_BASE | 0x00001001)
-#define CONFIG_SYS_OR0_PRELIM		0xFF001ED6
-#define CONFIG_SYS_BR7_PRELIM		(CONFIG_SYS_BCSR | 0x00000801)
-#define CONFIG_SYS_OR7_PRELIM		0xFFFF87F6
-
-#define CONFIG_SYS_RESET_ADDRESS	0xC0000000
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/SIMPC8313.h b/include/configs/SIMPC8313.h
deleted file mode 100644
index 46157cc..0000000
--- a/include/configs/SIMPC8313.h
+++ /dev/null
@@ -1,580 +0,0 @@
-/*
- * Copyright (C) Sheldon Instruments, Inc. 2008
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-/*
- * simpc8313 board configuration file
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- */
-#define CONFIG_NAND_U_BOOT
-
-#define CONFIG_E300			1
-#define CONFIG_MPC831x			1
-#define CONFIG_MPC8313			1
-
-#define CONFIG_SYS_NAND_U_BOOT_SIZE	(512 << 10)
-#define CONFIG_SYS_NAND_U_BOOT_DST	0x00100000
-#define CONFIG_SYS_NAND_U_BOOT_START	0x00100100
-#define CONFIG_SYS_NAND_U_BOOT_RELOC	0x00010000
-#define CONFIG_SYS_NAND_U_BOOT_RELOC_SP (CONFIG_SYS_NAND_U_BOOT_RELOC + 0x10000)
-
-#define CONFIG_SYS_TEXT_BASE	0x00100000 /* CONFIG_SYS_NAND_U_BOOT_DST */
-#define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000
-
-#ifdef CONFIG_NAND_SPL
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */
-#else
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE	/* start of monitor */
-#endif
-
-#define CONFIG_PCI
-#define CONFIG_PCI_INDIRECT_BRIDGE
-#define CONFIG_FSL_ELBC			1
-
-#define CONFIG_MISC_INIT_R
-
-/*
- * On-board devices
- *
- * TSEC1 is Marvell PHY 88E1118
- */
-
-#define CONFIG_SYS_33MHZ
-
-#define CONFIG_83XX_CLKIN		33333333	/* in Hz */
-
-#define CONFIG_SYS_CLK_FREQ		CONFIG_83XX_CLKIN
-
-#define CONFIG_SYS_IMMR			0xE0000000
-
-#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
-#define CONFIG_DEFAULT_IMMR		CONFIG_SYS_IMMR
-#endif
-
-#define CONFIG_SYS_MEMTEST_START	0x00001000
-#define CONFIG_SYS_MEMTEST_END		0x07f00000
-
-#define CONFIG_SYS_ACR_PIPE_DEP	3	/* Arbiter pipeline depth (0-3) */
-#define CONFIG_SYS_ACR_RPTCNT	3	/* Arbiter repeat count (0-7) */
-
-/*
- * Device configurations
- */
-#define CONFIG_TSEC1
-
-/*
- * DDR Setup
- */
-					/* DDR is system memory*/
-#define CONFIG_SYS_DDR_BASE		0x00000000
-#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_BASE
-#define CONFIG_SYS_DDR_SDRAM_BASE	CONFIG_SYS_DDR_BASE
-
-#define CONFIG_VERY_BIG_RAM
-#define CONFIG_MAX_MEM_MAPPED		(512 << 20)
-
-#define CONFIG_SYS_DDRCDR		(DDRCDR_EN \
-					| DDRCDR_PZ_NOMZ \
-					| DDRCDR_NZ_NOMZ \
-					| DDRCDR_M_ODR)
-					/* 0x73000002 TODO ODR & DRN ? */
-
-/*
- * FLASH on the Local Bus
- */
-#define CONFIG_SYS_NO_FLASH
-
-#if !defined(CONFIG_NAND_SPL)
-#define CONFIG_SYS_RAMBOOT
-#endif
-
-#define CONFIG_SYS_INIT_RAM_LOCK	1
-#define CONFIG_SYS_INIT_RAM_ADDR	0xFD000000 /* Initial RAM address */
-#define CONFIG_SYS_INIT_RAM_SIZE	0x1000 /* Size of used area in RAM*/
-
-#define CONFIG_SYS_GBL_DATA_OFFSET	\
-			(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-/* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
-#define CONFIG_SYS_MONITOR_LEN	(256 * 1024)	/* Reserve 256 kB for Mon */
-#define CONFIG_SYS_MALLOC_LEN	(512 * 1024)	/* Reserved for malloc */
-
-/*
- * Local Bus LCRR and LBCR regs
- */
-#define CONFIG_SYS_LCRR_DBYP	LCRR_DBYP
-#define CONFIG_SYS_LCRR_EADC	LCRR_EADC_1
-#define CONFIG_SYS_LCRR_CLKDIV	LCRR_CLKDIV_2
-#define CONFIG_SYS_LBC_LBCR	(0x00040000 /* TODO */ \
-				| (0xFF << LBCR_BMT_SHIFT) \
-				| 0xF)	/* 0x0004ff0f */
-
-				/* LB refresh timer prescal, 266MHz/32 */
-#define CONFIG_SYS_LBC_MRTPR	0x20000000
-
-/* drivers/mtd/nand/nand.c */
-#ifdef CONFIG_NAND_SPL
-#define CONFIG_SYS_NAND_BASE		0xFFF00000
-#else
-#define CONFIG_SYS_NAND_BASE		0xE2800000
-#endif
-#define CONFIG_SYS_FPGA_BASE		0xFF000000
-
-#define CONFIG_CMD_NAND
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
-#define CONFIG_NAND_FSL_ELBC		1
-
-#define CONFIG_SYS_NAND_BR_PRELIM	(CONFIG_SYS_NAND_BASE \
-				| BR_DECC_CHK_GEN	/* Use HW ECC */ \
-				| BR_PS_8		/* 8 bit Port */ \
-				| BR_MS_FCM		/* MSEL = FCM */ \
-				| BR_V)			/* valid */
-
-#ifdef CONFIG_NAND_SP
-#define CONFIG_SYS_NAND_OR_PRELIM	(OR_AM_32KB \
-					| OR_FCM_CSCT \
-					| OR_FCM_CST \
-					| OR_FCM_CHT \
-					| OR_FCM_SCY_1 \
-					| OR_FCM_TRLX \
-					| OR_FCM_EHTR)
-#define CONFIG_SYS_LBLAWAR0_PRELIM	(LBLAWAR_EN | LBLAWAR_32KB)
-#define CONFIG_SYS_NAND_PAGE_SIZE	512	/* NAND chip page size */
-					/* NAND chip block size */
-#define CONFIG_SYS_NAND_BLOCK_SIZE	(16 << 10)
-#define NAND_CACHE_PAGES		32
-#elif defined(CONFIG_NAND_LP)
-#define CONFIG_SYS_NAND_OR_PRELIM	(OR_AM_256KB \
-					| OR_FCM_PGS \
-					| OR_FCM_CSCT \
-					| OR_FCM_CST \
-					| OR_FCM_CHT \
-					| OR_FCM_SCY_1 \
-					| OR_FCM_TRLX \
-					| OR_FCM_EHTR)
-#define CONFIG_SYS_LBLAWAR0_PRELIM	(LBLAWAR_EN | LBLAWAR_256KB)
-#define CONFIG_SYS_NAND_PAGE_SIZE	2048	/* NAND chip page size */
-					/* NAND chip block size */
-#define CONFIG_SYS_NAND_BLOCK_SIZE	(128 << 10)
-#define NAND_CACHE_PAGES		64
-#else
-#error Page size of NAND not defined.
-#endif /* CONFIG_NAND_SP */
-
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	CONFIG_SYS_NAND_BLOCK_SIZE
-
-#define CONFIG_SYS_BR0_PRELIM		CONFIG_SYS_NAND_BR_PRELIM
-#define CONFIG_SYS_OR0_PRELIM		CONFIG_SYS_NAND_OR_PRELIM
-
-#define CONFIG_SYS_LBLAWBAR0_PRELIM	CONFIG_SYS_NAND_BASE
-
-#define CONFIG_SYS_NAND_LBLAWBAR_PRELIM	CONFIG_SYS_LBLAWBAR0_PRELIM
-#define CONFIG_SYS_NAND_LBLAWAR_PRELIM	CONFIG_SYS_LBLAWAR0_PRELIM
-
-#define CONFIG_SYS_BR1_PRELIM		(CONFIG_SYS_FPGA_BASE \
-					| BR_PS_16 \
-					| BR_MS_UPMA \
-					| BR_V)
-#define CONFIG_SYS_OR1_PRELIM		(OR_AM_2MB \
-					| OR_UPM_BCTLD)
-
-#define CONFIG_SYS_LBLAWBAR1_PRELIM	CONFIG_SYS_FPGA_BASE
-#define CONFIG_SYS_LBLAWAR1_PRELIM	(LBLAWAR_EN | LBLAWAR_2MB)
-
-/*
- * JFFS2 configuration
- */
-#define CONFIG_JFFS2_NAND
-#define CONFIG_JFFS2_DEV	"nand0"
-
-/* mtdparts command line support */
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_MTD_DEVICE	/* needed for mtdparts commands */
-#define MTDIDS_DEFAULT		"nand0=nand0"
-#define MTDPARTS_DEFAULT	"mtdparts=nand0:2M(u-boot),6M(kernel),-(jffs2)"
-
-/* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT		1
-#define CONFIG_OF_BOARD_SETUP		1
-#define CONFIG_OF_STDOUT_VIA_ALIAS	1
-
-/*
- * Serial Port
- */
-#define CONFIG_CONS_INDEX		1
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	1
-#ifdef CONFIG_NAND_SPL
-#define CONFIG_NS16550_MIN_FUNCTIONS
-#endif
-
-#define CONFIG_SYS_BAUDRATE_TABLE	\
-		{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
-
-#define CONFIG_SYS_NS16550_COM1		(CONFIG_SYS_IMMR+0x4500)
-#define CONFIG_SYS_NS16550_COM2		(CONFIG_SYS_IMMR+0x4600)
-
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-
-/* I2C */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_FSL
-#define CONFIG_SYS_FSL_I2C_SPEED	400000
-#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
-#define CONFIG_SYS_FSL_I2C2_SPEED	400000
-#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
-#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
-#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x69} }
-
-/*
- * General PCI
- * Addresses are mapped 1-1.
- */
-#define CONFIG_SYS_PCI1_MEM_BASE	0x80000000
-#define CONFIG_SYS_PCI1_MEM_PHYS	CONFIG_SYS_PCI1_MEM_BASE
-#define CONFIG_SYS_PCI1_MEM_SIZE	0x10000000	/* 256M */
-#define CONFIG_SYS_PCI1_MMIO_BASE	0x90000000
-#define CONFIG_SYS_PCI1_MMIO_PHYS	CONFIG_SYS_PCI1_MMIO_BASE
-#define CONFIG_SYS_PCI1_MMIO_SIZE	0x10000000	/* 256M */
-#define CONFIG_SYS_PCI1_IO_BASE		0x00000000
-#define CONFIG_SYS_PCI1_IO_PHYS		0xE2000000
-#define CONFIG_SYS_PCI1_IO_SIZE		0x00100000	/* 1M */
-
-#define CONFIG_PCI_PNP			/* do pci plug-and-play */
-#define CONFIG_SYS_PCI_SUBSYS_VENDORID	0x1057	/* Motorola */
-
-/*
- * TSEC
- */
-#define CONFIG_TSEC_ENET		/* TSEC ethernet support */
-
-#define CONFIG_GMII			/* MII PHY management */
-
-#ifdef CONFIG_TSEC1
-#define CONFIG_HAS_ETH0
-#define CONFIG_TSEC1_NAME		"TSEC0"
-#define CONFIG_SYS_TSEC1_OFFSET		0x24000
-#define TSEC1_PHY_ADDR			0x0
-#define TSEC1_FLAGS			TSEC_GIGABIT
-#define TSEC1_PHYIDX			0
-#endif
-
-#ifdef CONFIG_TSEC2
-#define CONFIG_HAS_ETH1
-#define CONFIG_TSEC2_NAME		"TSEC1"
-#define CONFIG_SYS_TSEC2_OFFSET		0x25000
-#define TSEC2_PHY_ADDR			4
-#define TSEC2_FLAGS			TSEC_GIGABIT
-#define TSEC2_PHYIDX			0
-#endif
-
-
-/* Options are: TSEC[0-1] */
-#define CONFIG_ETHPRIME			"TSEC1"
-
-/*
- * Configure on-board RTC
- */
-#define CONFIG_RTC_DS1337
-#define CONFIG_SYS_I2C_RTC_ADDR		0x68
-
-/*
- * Environment
- */
-#if defined(CONFIG_NAND_U_BOOT)
-	#define CONFIG_ENV_IS_IN_NAND	1
-	#define CONFIG_ENV_OFFSET	(768 * 1024)
-	#define CONFIG_ENV_SECT_SIZE	CONFIG_SYS_NAND_BLOCK_SIZE
-	#define CONFIG_ENV_SIZE		CONFIG_ENV_SECT_SIZE
-	#define CONFIG_ENV_SIZE_REDUND	CONFIG_ENV_SIZE
-	#define CONFIG_ENV_RANGE	(CONFIG_ENV_SECT_SIZE * 4)
-	#define CONFIG_ENV_OFFSET_REDUND	\
-					(CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)
-#elif !defined(CONFIG_SYS_RAMBOOT)
-	#define CONFIG_ENV_IS_IN_FLASH	1
-	#define CONFIG_ENV_ADDR		\
-			(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
-	#define CONFIG_ENV_SECT_SIZE	0x10000	/* 64K(one sector) for env */
-	#define CONFIG_ENV_SIZE		0x2000
-
-/* Address and size of Redundant Environment Sector */
-#else
-	#define CONFIG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
-	#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - 0x1000)
-	#define CONFIG_ENV_SIZE		0x2000
-#endif
-
-#define CONFIG_LOADS_ECHO		1 /* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE	1 /* allow baudrate change */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-#undef CONFIG_CMD_IMLS
-#undef CONFIG_CMD_FLASH
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_JFFS2
-
-#if defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_NAND_U_BOOT)
-	#undef CONFIG_CMD_SAVEENV
-	#undef CONFIG_CMD_LOADS
-#endif
-
-#define CONFIG_CMDLINE_EDITING	1
-#define CONFIG_AUTO_COMPLETE	/* add autocompletion support   */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP			/* undef to save memory */
-#define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
-#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size */
-
-#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE		\
-				+ sizeof(CONFIG_SYS_PROMPT)	\
-				+ 16)	/* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS	16	/* max number of command args */
-				/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 256 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-				/* Initial Memory map for Linux*/
-#define CONFIG_SYS_BOOTMAPSZ	(256 << 20)
-
-#define CONFIG_SYS_RCWH_PCIHOST	0x80000000	/* PCIHOST */
-
-#define CONFIG_SYS_HRCW_LOW	(HRCWL_LCL_BUS_TO_SCB_CLK_1X1	\
-				| 0x20000000 /* reserved */	\
-				| HRCWL_DDR_TO_SCB_CLK_2X1	\
-				| HRCWL_CSB_TO_CLKIN_4X1	\
-				| HRCWL_CORE_TO_CSB_2_5X1)
-
-#define CONFIG_SYS_NS16550_CLK	(CONFIG_83XX_CLKIN * 4)
-
-#define CONFIG_SYS_HRCW_HIGH_BASE	(HRCWH_PCI_HOST	\
-				| HRCWH_PCI1_ARBITER_ENABLE	\
-				| HRCWH_CORE_ENABLE		\
-				| HRCWH_BOOTSEQ_DISABLE		\
-				| HRCWH_SW_WATCHDOG_DISABLE	\
-				| HRCWH_TSEC1M_IN_RGMII		\
-				| HRCWH_TSEC2M_IN_RGMII		\
-				| HRCWH_BIG_ENDIAN		\
-				| HRCWH_LALE_NORMAL)
-
-#ifdef CONFIG_NAND_LP
-#define CONFIG_SYS_HRCW_HIGH	(CONFIG_SYS_HRCW_HIGH_BASE	\
-				| HRCWH_FROM_0XFFF00100		\
-				| HRCWH_ROM_LOC_NAND_LP_8BIT	\
-				| HRCWH_RL_EXT_NAND)
-#else
-#define CONFIG_SYS_HRCW_HIGH	(CONFIG_SYS_HRCW_HIGH_BASE	\
-				| HRCWH_FROM_0XFFF00100		\
-				| HRCWH_ROM_LOC_NAND_SP_8BIT	\
-				| HRCWH_RL_EXT_NAND)
-#endif
-
-/* System IO Config */
-#define CONFIG_SYS_SICRH	(SICRH_ETSEC2_B	\
-				| SICRH_ETSEC2_C	\
-				| SICRH_ETSEC2_D	\
-				| SICRH_ETSEC2_E	\
-				| SICRH_ETSEC2_F	\
-				| SICRH_ETSEC2_G	\
-				| SICRH_TSOBI1		\
-				| SICRH_TSOBI2)
-#define CONFIG_SYS_SICRL	(SICRL_LBC		\
-				| SICRL_USBDR_10	\
-				| SICRL_ETSEC2_A)
-
-#define CONFIG_SYS_HID0_INIT	0x000000000
-#define CONFIG_SYS_HID0_FINAL	(HID0_ENABLE_MACHINE_CHECK \
-				| HID0_ENABLE_INSTRUCTION_CACHE \
-				| HID0_ENABLE_DYNAMIC_POWER_MANAGMENT)
-
-#define CONFIG_SYS_HID2		HID2_HBE
-
-#define CONFIG_HIGH_BATS	1	/* High BATs supported */
-
-/* DDR @ 0x00000000 */
-#define CONFIG_SYS_IBAT0L	(CONFIG_SYS_SDRAM_BASE | BATL_PP_RW)
-#define CONFIG_SYS_IBAT0U	(CONFIG_SYS_SDRAM_BASE \
-				| BATU_BL_256M \
-				| BATU_VS \
-				| BATU_VP)
-#define CONFIG_SYS_IBAT1L	((CONFIG_SYS_SDRAM_BASE + 0x10000000) \
-				| BATL_PP_RW)
-#define CONFIG_SYS_IBAT1U	((CONFIG_SYS_SDRAM_BASE + 0x10000000) \
-				| BATU_BL_256M \
-				| BATU_VS \
-				| BATU_VP)
-
-/* PCI @ 0x80000000 */
-#define CONFIG_SYS_IBAT2L	(CONFIG_SYS_PCI1_MEM_BASE | BATL_PP_RW)
-#define CONFIG_SYS_IBAT2U	(CONFIG_SYS_PCI1_MEM_BASE \
-				| BATU_BL_256M \
-				| BATU_VS \
-				| BATU_VP)
-#define CONFIG_SYS_IBAT3L	(CONFIG_SYS_PCI1_MMIO_BASE \
-				| BATL_PP_RW \
-				| BATL_CACHEINHIBIT \
-				| BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_IBAT3U	(CONFIG_SYS_PCI1_MMIO_BASE \
-				| BATU_BL_256M \
-				| BATU_VS \
-				| BATU_VP)
-
-/* PCI2 not supported on 8313 */
-#define CONFIG_SYS_IBAT4L	(0)
-#define CONFIG_SYS_IBAT4U	(0)
-
-/* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 */
-#define CONFIG_SYS_IBAT5L	(CONFIG_SYS_IMMR \
-				| BATL_PP_RW \
-				| BATL_CACHEINHIBIT \
-				| BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_IBAT5U	(CONFIG_SYS_IMMR \
-				| BATU_BL_256M \
-				| BATU_VS \
-				| BATU_VP)
-
-/* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */
-#define CONFIG_SYS_IBAT6L	(0xF0000000 \
-				| BATL_PP_RW \
-				| BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_IBAT6U	(0xF0000000 \
-				| BATU_BL_256M \
-				| BATU_VS \
-				| BATU_VP)
-
-#define CONFIG_SYS_IBAT7L	(0)
-#define CONFIG_SYS_IBAT7U	(0)
-
-#define CONFIG_SYS_DBAT0L	CONFIG_SYS_IBAT0L
-#define CONFIG_SYS_DBAT0U	CONFIG_SYS_IBAT0U
-#define CONFIG_SYS_DBAT1L	CONFIG_SYS_IBAT1L
-#define CONFIG_SYS_DBAT1U	CONFIG_SYS_IBAT1U
-#define CONFIG_SYS_DBAT2L	CONFIG_SYS_IBAT2L
-#define CONFIG_SYS_DBAT2U	CONFIG_SYS_IBAT2U
-#define CONFIG_SYS_DBAT3L	CONFIG_SYS_IBAT3L
-#define CONFIG_SYS_DBAT3U	CONFIG_SYS_IBAT3U
-#define CONFIG_SYS_DBAT4L	CONFIG_SYS_IBAT4L
-#define CONFIG_SYS_DBAT4U	CONFIG_SYS_IBAT4U
-#define CONFIG_SYS_DBAT5L	CONFIG_SYS_IBAT5L
-#define CONFIG_SYS_DBAT5U	CONFIG_SYS_IBAT5U
-#define CONFIG_SYS_DBAT6L	CONFIG_SYS_IBAT6L
-#define CONFIG_SYS_DBAT6U	CONFIG_SYS_IBAT6U
-#define CONFIG_SYS_DBAT7L	CONFIG_SYS_IBAT7L
-#define CONFIG_SYS_DBAT7U	CONFIG_SYS_IBAT7U
-
-/*
- * Environment Configuration
- */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_NETDEV		"eth1"
-
-#define CONFIG_HOSTNAME		simpc8313
-#define CONFIG_ROOTPATH		"/tftpboot/"
-#define CONFIG_BOOTFILE		"/tftpboot/uImage"
-				/* U-Boot image on TFTP server */
-#define CONFIG_UBOOTPATH	"u-boot-nand.bin"
-#define CONFIG_FDTFILE		"simpc8313.dtb"
-
-				/* default location for tftp and bootm */
-#define CONFIG_LOADADDR		500000
-#define CONFIG_BOOTDELAY	5	/* 5 second delay */
-#define CONFIG_BAUDRATE		115200
-
-#define CONFIG_BOOTCOMMAND	"nand read $loadaddr kernel 600000;" \
-					"bootm $loadaddr - $fdtaddr"
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	"netdev=" CONFIG_NETDEV "\0"					\
-	"ethprime=TSEC1\0"						\
-	"uboot=" CONFIG_UBOOTPATH "\0"					\
-	"tftpflash=tftpboot $loadaddr $uboot; "				\
-		"protect off " __stringify(CONFIG_SYS_TEXT_BASE)	\
-			" +$filesize; "	\
-		"erase " __stringify(CONFIG_SYS_TEXT_BASE)		\
-			" +$filesize; "	\
-		"cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE)	\
-			" $filesize; "	\
-		"protect on " __stringify(CONFIG_SYS_TEXT_BASE)		\
-			" +$filesize; "	\
-		"cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE)	\
-			" $filesize\0"	\
-	"fdtaddr=ae0000\0"						\
-	"fdtfile=" CONFIG_FDTFILE "\0"					\
-	"console=ttyS0\0"						\
-	"setbootargs=setenv bootargs "					\
-		"root=$rootdev rw console=$console,$baudrate $othbootargs\0" \
-	"setipargs=setenv bootargs nfsroot=$serverip:$rootpath "	\
-		"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:"	\
-							"$netdev:off "	\
-		"root=$rootdev rw console=$console,$baudrate $othbootargs\0" \
-	"load_uboot=tftp 100000 u-boot-nand.bin\0"			\
-	"burn_uboot=nand erase u-boot 80000; "				\
-		"nand write 100000 u-boot $filesize\0"			\
-	"update_uboot=run load_uboot;run burn_uboot\0"			\
-	"mtdids=nand0=nand0\0"						\
-	"mtdparts=mtdparts=nand0:2M(u-boot),6M(kernel),-(jffs2)\0"	\
-	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
-		"nfsroot=${serverip}:${rootpath}\0"			\
-	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
-	"addip=setenv bootargs ${bootargs} "				\
-		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
-		":${hostname}:${netdev}:off panic=1\0"			\
-	"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0" \
-	"bootargs=root=/dev/mtdblock2 rootfstype=jffs2 rw "		\
-		"console=ttyS0,115200\0"				\
-	""
-
-#define CONFIG_NFSBOOTCOMMAND						\
-	"setenv rootdev /dev/nfs;"					\
-	"run setbootargs;"						\
-	"run setipargs;"						\
-	"tftp $loadaddr $bootfile;"					\
-	"tftp $fdtaddr $fdtfile;"					\
-	"bootm $loadaddr - $fdtaddr"
-
-#define CONFIG_RAMBOOTCOMMAND						\
-	"setenv rootdev /dev/ram;"					\
-	"run setbootargs;"						\
-	"tftp $ramdiskaddr $ramdiskfile;"				\
-	"tftp $loadaddr $bootfile;"					\
-	"tftp $fdtaddr $fdtfile;"					\
-	"bootm $loadaddr $ramdiskaddr $fdtaddr"
-
-#endif	/* __CONFIG_H */
diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h
index 2215ac8..f2a75ae 100644
--- a/include/configs/T1040QDS.h
+++ b/include/configs/T1040QDS.h
@@ -201,6 +201,12 @@ unsigned long get_board_ddr_clk(void);
 				CSPR_MSEL_NOR | \
 				CSPR_V)
 #define CONFIG_SYS_NOR_AMASK	IFC_AMASK(128*1024*1024)
+
+/*
+ * TDM Definition
+ */
+#define T1040_TDM_QUIRK_CCSR_BASE	0xfe000000
+
 /* NOR Flash Timing Params */
 #define CONFIG_SYS_NOR_CSOR	CSOR_NAND_TRHZ_80
 #define CONFIG_SYS_NOR_FTIM0	(FTIM0_NOR_TACSE(0x4) | \
diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h
index e564cb7..8d6c51b 100644
--- a/include/configs/T104xRDB.h
+++ b/include/configs/T104xRDB.h
@@ -230,6 +230,12 @@
 				CSPR_MSEL_NOR | \
 				CSPR_V)
 #define CONFIG_SYS_NOR_AMASK	IFC_AMASK(128*1024*1024)
+
+/*
+ * TDM Definition
+ */
+#define T1040_TDM_QUIRK_CCSR_BASE	0xfe000000
+
 /* NOR Flash Timing Params */
 #define CONFIG_SYS_NOR_CSOR	CSOR_NAND_TRHZ_80
 #define CONFIG_SYS_NOR_FTIM0	(FTIM0_NOR_TACSE(0x4) | \
diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h
index 8dd2e49..59d142e 100644
--- a/include/configs/T208xQDS.h
+++ b/include/configs/T208xQDS.h
@@ -227,8 +227,9 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_VERY_BIG_RAM
 #define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000
 #define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
-#define CONFIG_DIMM_SLOTS_PER_CTLR	1
-#define CONFIG_CHIP_SELECTS_PER_CTRL	(4 * CONFIG_DIMM_SLOTS_PER_CTLR)
+#define CONFIG_DIMM_SLOTS_PER_CTLR	2
+#define CONFIG_CHIP_SELECTS_PER_CTRL	(2 * CONFIG_DIMM_SLOTS_PER_CTLR)
+#define CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
 #define CONFIG_DDR_SPD
 #define CONFIG_SYS_FSL_DDR3
 #undef CONFIG_FSL_DDR_INTERACTIVE
diff --git a/include/configs/ZPC1900.h b/include/configs/ZPC1900.h
deleted file mode 100644
index d76a140..0000000
--- a/include/configs/ZPC1900.h
+++ /dev/null
@@ -1,261 +0,0 @@
-/*
- * Copyright (C) 2003-2005 Arabella Software Ltd.
- * Yuli Barcohen <yuli@arabellasw.com>
- *
- * U-Boot configuration for Zephyr Engineering ZPC.1900 board.
- * This port was developed and tested on Revision C board.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_ZPC1900		1	/* ...on Zephyr ZPC.1900 board */
-
-#define	CONFIG_SYS_TEXT_BASE	0xFE000000
-
-#define CPU_ID_STR		"MPC8265"
-#define CONFIG_CPM2		1	/* Has a CPM2 */
-
-/* Allow serial number (serial#) and MAC address (ethaddr) to be overwritten */
-#define CONFIG_ENV_OVERWRITE
-
-/*
- * Select serial console configuration
- *
- * If either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
- * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
- * for SCC).
- */
-#define	CONFIG_CONS_ON_SMC		/* Console is on SMC         */
-#undef  CONFIG_CONS_ON_SCC		/* It's not on SCC           */
-#undef	CONFIG_CONS_NONE		/* It's not on external UART */
-#define CONFIG_CONS_INDEX	1	/* SMC1 is used for console  */
-
-/*
- * Select ethernet configuration
- *
- * If either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected,
- * then CONFIG_ETHER_INDEX must be set to the channel number (1-4 for
- * SCC, 1-3 for FCC)
- *
- * If CONFIG_ETHER_NONE is defined, then either the ethernet routines
- * must be defined elsewhere (as for the console), or CONFIG_CMD_NET
- * must be unset.
- */
-#undef	CONFIG_ETHER_ON_SCC		/* Ethernet is not on SCC */
-#define CONFIG_ETHER_ON_FCC		/* Ethernet is on FCC     */
-#undef	CONFIG_ETHER_NONE		/* No external Ethernet   */
-
-#ifdef CONFIG_ETHER_ON_FCC
-
-#define CONFIG_ETHER_INDEX	2	/* FCC2 is used for Ethernet */
-
-#if (CONFIG_ETHER_INDEX == 2)
-/*
- * - Rx clock is CLK13
- * - Tx clock is CLK14
- * - Select bus for bd/buffers (see 28-13)
- * - Full duplex
- */
-# define CONFIG_SYS_CMXFCR_MASK2	(CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
-# define CONFIG_SYS_CMXFCR_VALUE2	(CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
-# define CONFIG_SYS_CPMFCR_RAMTYPE	0
-# define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
-
-#endif /* CONFIG_ETHER_INDEX */
-
-#define CONFIG_MII			/* MII PHY management        */
-#define CONFIG_BITBANGMII		/* Bit-banged MDIO interface */
-/*
- * GPIO pins used for bit-banged MII communications
- */
-#define MDIO_PORT		2	/* Port C */
-#define MDIO_DECLARE		volatile ioport_t *iop = ioport_addr ( \
-					(immap_t *) CONFIG_SYS_IMMR, MDIO_PORT )
-#define MDC_DECLARE		MDIO_DECLARE
-
-#define MDIO_ACTIVE		(iop->pdir |=  0x00400000)
-#define MDIO_TRISTATE		(iop->pdir &= ~0x00400000)
-#define MDIO_READ		((iop->pdat &  0x00400000) != 0)
-
-#define MDIO(bit)		if(bit) iop->pdat |=  0x00400000; \
-				else	iop->pdat &= ~0x00400000
-
-#define MDC(bit)		if(bit) iop->pdat |=  0x00200000; \
-				else	iop->pdat &= ~0x00200000
-
-#define MIIDELAY		udelay(1)
-
-#endif /* CONFIG_ETHER_ON_FCC */
-
-#ifndef CONFIG_8260_CLKIN
-#define CONFIG_8260_CLKIN	66666666	/* in Hz */
-#endif
-
-#define CONFIG_BAUDRATE		38400
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_IMMAP
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-
-
-#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds */
-#define CONFIG_BOOTCOMMAND	"dhcp;bootm"	/* autoboot command */
-#define CONFIG_BOOTARGS		"root=/dev/nfs rw ip=:::::eth0:dhcp"
-
-#if defined(CONFIG_CMD_KGDB)
-#undef	CONFIG_KGDB_ON_SMC		/* define if kgdb on SMC */
-#define CONFIG_KGDB_ON_SCC		/* define if kgdb on SCC */
-#undef	CONFIG_KGDB_NONE		/* define if kgdb on something else */
-#define CONFIG_KGDB_INDEX	2	/* which serial channel for kgdb */
-#define CONFIG_KGDB_BAUDRATE	115200	/* speed to run kgdb serial port at */
-#endif
-
-#define CONFIG_BZIP2	/* include support for bzip2 compressed images */
-#undef	CONFIG_WATCHDOG			/* disable platform specific watchdog */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_LONGHELP			/* undef to save memory	    */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size  */
-#else
-#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size  */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size  */
-#define CONFIG_SYS_MAXARGS		16		/* max number of command args */
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size  */
-
-#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on */
-#define CONFIG_SYS_MEMTEST_END		0x03800000	/* 1 ... 56 MB in DRAM	*/
-
-#define CONFIG_SYS_LOAD_ADDR		0x400000	/* default load address */
-
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
-
-#define CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_SDRAM_SIZE		64
-
-#define CONFIG_SYS_IMMR		0xF0000000
-#define CONFIG_SYS_LSDRAM_BASE		0xFC000000
-#define CONFIG_SYS_FLASH_BASE		0xFE000000
-#define CONFIG_SYS_BCSR		0xFEA00000
-#define CONFIG_SYS_EEPROM		0xFEB00000
-#define CONFIG_SYS_FLSIMM_BASE		0xFF000000
-
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max num of flash banks	*/
-#define CONFIG_SYS_MAX_FLASH_SECT	32	/* max num of sects on one chip */
-
-#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLSIMM_BASE }
-
-#define BCSR_PCI_MODE		0x01
-
-#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE	0x4000	/* Size of used area in DPRAM	*/
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-/* Hard reset configuration word */
-#define CONFIG_SYS_HRCW_MASTER		(HRCW_EBM | HRCW_BPS01| HRCW_CIP          |\
-				 HRCW_L2CPC10 | HRCW_DPPC00 | HRCW_ISB100 |\
-				 HRCW_BMS | HRCW_LBPC00 | HRCW_APPC10     |\
-				 HRCW_MODCK_H0111                          \
-				) /* 0x16848207 */
-/* No slaves */
-#define CONFIG_SYS_HRCW_SLAVE1		0
-#define CONFIG_SYS_HRCW_SLAVE2		0
-#define CONFIG_SYS_HRCW_SLAVE3		0
-#define CONFIG_SYS_HRCW_SLAVE4		0
-#define CONFIG_SYS_HRCW_SLAVE5		0
-#define CONFIG_SYS_HRCW_SLAVE6		0
-#define CONFIG_SYS_HRCW_SLAVE7		0
-
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE
-
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-#define CONFIG_SYS_RAMBOOT
-#endif
-
-#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#define CONFIG_SYS_MALLOC_LEN		(4096 << 10)	/* Reserve 4 MB for malloc()	*/
-#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
-
-#if !defined(CONFIG_ENV_IS_IN_FLASH) && !defined(CONFIG_ENV_IS_IN_NVRAM)
-#define CONFIG_ENV_IS_IN_NVRAM	1
-#endif
-
-#ifdef CONFIG_ENV_IS_IN_FLASH
-#  define CONFIG_ENV_SECT_SIZE	0x10000
-#  define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
-#else
-#  define CONFIG_ENV_ADDR		(CONFIG_SYS_EEPROM + 0x400)
-#  define CONFIG_ENV_SIZE		0x1000
-#  define CONFIG_SYS_NVRAM_ACCESS_ROUTINE
-#endif
-
-#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC8260 CPU */
-#if defined(CONFIG_CMD_KGDB)
-#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
-#endif
-
-#define CONFIG_SYS_HID0_INIT		(HID0_ICFI)
-#define CONFIG_SYS_HID0_FINAL		(HID0_ICE | HID0_IFEM | HID0_ABE)
-
-#define CONFIG_SYS_HID2		0
-
-#define CONFIG_SYS_SIUMCR		0x42200000
-#define CONFIG_SYS_SYPCR		0xFFFFFFC3
-#define CONFIG_SYS_BCR			0x90000000
-#define CONFIG_SYS_SCCR		SCCR_DFBRG01
-
-#define CONFIG_SYS_RMR			RMR_CSRE
-#define CONFIG_SYS_TMCNTSC		(TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
-#define CONFIG_SYS_PISCR		(PISCR_PS|PISCR_PTF|PISCR_PTE)
-#define CONFIG_SYS_RCCR		0
-
-#define CONFIG_SYS_PSDMR		/* 0x834DA43B */0x014DA43A
-#define CONFIG_SYS_PSRT		0x0F/* 0x0C */
-#define CONFIG_SYS_LSDMR		0x0085A562
-#define CONFIG_SYS_LSRT		0x0F
-#define CONFIG_SYS_MPTPR		0x4000
-
-#define CONFIG_SYS_PSDRAM_BR		(CONFIG_SYS_SDRAM_BASE | 0x00000041)
-#define CONFIG_SYS_PSDRAM_OR		0xFC0028C0
-#define CONFIG_SYS_LSDRAM_BR		(CONFIG_SYS_LSDRAM_BASE | 0x00001861)
-#define CONFIG_SYS_LSDRAM_OR		0xFF803480
-
-#define CONFIG_SYS_BR0_PRELIM		(CONFIG_SYS_FLASH_BASE | 0x00000801)
-#define CONFIG_SYS_OR0_PRELIM		0xFFE00856
-#define CONFIG_SYS_BR5_PRELIM		(CONFIG_SYS_EEPROM | 0x00000801)
-#define CONFIG_SYS_OR5_PRELIM		0xFFFF03F6
-#define CONFIG_SYS_BR6_PRELIM		(CONFIG_SYS_FLSIMM_BASE | 0x00001801)
-#define CONFIG_SYS_OR6_PRELIM		0xFF000856
-#define CONFIG_SYS_BR7_PRELIM		(CONFIG_SYS_BCSR | 0x00000801)
-#define CONFIG_SYS_OR7_PRELIM		0xFFFF83F6
-
-#define CONFIG_SYS_RESET_ADDRESS	0xC0000000
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index 762f6d2..a48b386 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -18,6 +18,21 @@
 
 #include <configs/ti_am335x_common.h>
 
+#ifndef CONFIG_SPL_BUILD
+# define CONFIG_FIT
+# define CONFIG_TIMESTAMP
+# define CONFIG_LZO
+# ifdef CONFIG_ENABLE_VBOOT
+#  define CONFIG_OF_CONTROL
+#  define CONFIG_OF_SEPARATE
+#  define CONFIG_DEFAULT_DEVICE_TREE am335x-boneblack
+#  define CONFIG_FIT_SIGNATURE
+#  define CONFIG_RSA
+# endif
+#endif
+
+#define CONFIG_SYS_BOOTM_LEN		(16 << 20)
+
 #define MACH_TYPE_TIAM335EVM		3589	/* Until the next sync */
 #define CONFIG_MACH_TYPE		MACH_TYPE_TIAM335EVM
 #define CONFIG_BOARD_LATE_INIT
diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h
index 4407b45..ad4cbd8 100644
--- a/include/configs/am3517_crane.h
+++ b/include/configs/am3517_crane.h
@@ -329,6 +329,7 @@
 #define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/omap-common/u-boot-spl.lds"
 
 /* NAND boot config */
+#define CONFIG_SYS_NAND_BUSWIDTH_16BIT	16
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_PAGE_COUNT	64
 #define CONFIG_SYS_NAND_PAGE_SIZE	2048
diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h
index d5e6c4b..974ce98 100644
--- a/include/configs/am43xx_evm.h
+++ b/include/configs/am43xx_evm.h
@@ -32,11 +32,15 @@
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
 #define CONFIG_SYS_I2C_MULTI_EEPROMS
 
+/* Power */
+#define CONFIG_POWER_TPS65218
+
 /* SPL defines. */
 #define CONFIG_SPL_TEXT_BASE		0x40300350
 #define CONFIG_SPL_MAX_SIZE		(220 << 10)	/* 220KB */
 #define CONFIG_SYS_SPL_ARGS_ADDR	(CONFIG_SYS_SDRAM_BASE + \
 					 (128 << 20))
+#define CONFIG_SPL_POWER_SUPPORT
 #define CONFIG_SPL_YMODEM_SUPPORT
 
 /* Enabling L2 Cache */
@@ -48,15 +52,24 @@
  * Since SPL did pll and ddr initialization for us,
  * we don't need to do it twice.
  */
-#if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_NOR_BOOT)
+#if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_QSPI_BOOT)
 #define CONFIG_SKIP_LOWLEVEL_INIT
 #endif
 
+/*
+ * When building U-Boot such that there is no previous loader
+ * we need to call board_early_init_f.  This is taken care of in
+ * s_init when we have SPL used.
+ */
+#if !defined(CONFIG_SKIP_LOWLEVEL_INIT) && !defined(CONFIG_SPL)
+#define CONFIG_BOARD_EARLY_INIT_F
+#endif
+
 /* Now bring in the rest of the common code. */
 #include <configs/ti_armv7_common.h>
 
-/* Always 128 KiB env size */
-#define CONFIG_ENV_SIZE			(128 << 10)
+/* Always 64 KiB env size */
+#define CONFIG_ENV_SIZE			(64 << 10)
 
 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
 
@@ -86,6 +99,30 @@
 #define CONFIG_OMAP_USB_PHY
 #define CONFIG_AM437X_USB2PHY2_HOST
 
+#ifdef CONFIG_QSPI_BOOT
+#define CONFIG_SYS_TEXT_BASE           0x30000000
+#undef CONFIG_ENV_IS_NOWHERE
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
+#define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
+#define CONFIG_ENV_SECT_SIZE           (64 << 10) /* 64 KB sectors */
+#define CONFIG_ENV_OFFSET              0x110000
+#define CONFIG_ENV_OFFSET_REDUND       0x120000
+#ifdef MTDIDS_DEFAULT
+#undef MTDIDS_DEFAULT
+#endif
+#ifdef MTDPARTS_DEFAULT
+#undef MTDPARTS_DEFAULT
+#endif
+#define MTDPARTS_DEFAULT		"mtdparts=qspi.0:512k(QSPI.u-boot)," \
+					"512k(QSPI.u-boot.backup)," \
+					"512k(QSPI.u-boot-spl-os)," \
+					"64k(QSPI.u-boot-env)," \
+					"64k(QSPI.u-boot-env.backup)," \
+					"8m(QSPI.kernel)," \
+					"-(QSPI.file-system)"
+#endif
+
 /* SPI */
 #undef CONFIG_OMAP3_SPI
 #define CONFIG_TI_QSPI
@@ -94,6 +131,7 @@
 #define CONFIG_CMD_SF
 #define CONFIG_CMD_SPI
 #define CONFIG_TI_SPI_MMAP
+#define CONFIG_SPI_FLASH_BAR
 #define CONFIG_QSPI_SEL_GPIO                   48
 #define CONFIG_SF_DEFAULT_SPEED                48000000
 #define CONFIG_DEFAULT_SPI_MODE                SPI_MODE_3
@@ -145,6 +183,7 @@
 	"loadfdt=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
 	"mmcboot=mmc dev ${mmcdev}; " \
 		"setenv devnum ${mmcdev}; " \
+		"setenv devtype mmc; " \
 		"if mmc rescan; then " \
 			"echo SD/MMC found on device ${devnum};" \
 			"if run loadbootenv; then " \
@@ -187,6 +226,8 @@
 			"setenv fdtfile am43x-epos-evm.dtb; fi; " \
 		"if test $board_name = AM43__GP; then " \
 			"setenv fdtfile am437x-gp-evm.dtb; fi; " \
+		"if test $board_name = AM43__SK; then " \
+			"setenv fdtfile am437x-sk-evm.dtb; fi; " \
 		"if test $fdtfile = undefined; then " \
 			"echo WARNING: Could not determine device tree; fi; \0"
 
diff --git a/include/configs/arndale.h b/include/configs/arndale.h
index 515facf..370db82 100644
--- a/include/configs/arndale.h
+++ b/include/configs/arndale.h
@@ -224,11 +224,13 @@
 
 /* PMIC */
 #define CONFIG_PMIC
-#define CONFIG_PMIC_I2C
-#define CONFIG_PMIC_MAX77686
+#define CONFIG_POWER_I2C
+#define CONFIG_POWER_MAX77686
 
 #define CONFIG_DEFAULT_DEVICE_TREE	exynos5250-arndale
 
+#define CONFIG_PREBOOT
+
 /* Ethernet Controllor Driver */
 #ifdef CONFIG_CMD_NET
 #define CONFIG_SMC911X
diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h
index ccfda71..db5d5ea 100644
--- a/include/configs/at91sam9m10g45ek.h
+++ b/include/configs/at91sam9m10g45ek.h
@@ -22,7 +22,6 @@
 #define CONFIG_SYS_AT91_MAIN_CLOCK      12000000 /* from 12 MHz crystal */
 
 #define CONFIG_AT91SAM9M10G45EK
-#define CONFIG_AT91FAMILY
 
 #define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs	*/
 #define CONFIG_SETUP_MEMORY_TAGS
@@ -34,6 +33,8 @@
 #define CONFIG_CMD_BOOTZ
 #define CONFIG_OF_LIBFDT
 
+#define CONFIG_SYS_GENERIC_BOARD
+
 /* general purpose I/O */
 #define CONFIG_ATMEL_LEGACY		/* required until (g)pio is fixed */
 #define CONFIG_AT91_GPIO
@@ -115,6 +116,20 @@
 
 #endif
 
+/* MMC */
+#define CONFIG_CMD_MMC
+
+#ifdef CONFIG_CMD_MMC
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_GENERIC_ATMEL_MCI
+#endif
+
+#if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC)
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+#endif
+
 /* Ethernet */
 #define CONFIG_MACB
 #define CONFIG_RMII
@@ -126,7 +141,6 @@
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_ATMEL
 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	2
-#define CONFIG_DOS_PARTITION
 #define CONFIG_USB_STORAGE
 
 #define CONFIG_SYS_LOAD_ADDR		0x22000000	/* load address */
@@ -134,6 +148,7 @@
 #define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
 #define CONFIG_SYS_MEMTEST_END		0x23e00000
 
+#ifdef CONFIG_SYS_USE_NANDFLASH
 /* bootstrap + u-boot + env in nandflash */
 #define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_OFFSET		0xc0000
@@ -149,6 +164,28 @@
 	"256k(env),256k(env_redundant),256k(spare),"			\
 	"512k(dtb),6M(kernel)ro,-(rootfs) "				\
 	"root=/dev/mtdblock7 rw rootfstype=jffs2"
+#elif CONFIG_SYS_USE_MMC
+/* bootstrap + u-boot + env + linux in mmc */
+#define FAT_ENV_INTERFACE	"mmc"
+/*
+ * We don't specify the part number, if device 0 has partition table, it means
+ * the first partition; it no partition table, then take whole device as a
+ * FAT file system.
+ */
+#define FAT_ENV_DEVICE_AND_PART	"0"
+#define FAT_ENV_FILE		"uboot.env"
+#define CONFIG_ENV_IS_IN_FAT
+#define CONFIG_FAT_WRITE
+#define CONFIG_ENV_SIZE		0x4000
+
+#define CONFIG_BOOTARGS		"console=ttyS0,115200 " \
+				"mtdparts=atmel_nand:" \
+				"8M(bootstrap/uboot/kernel)ro,-(rootfs) " \
+				"root=/dev/mmcblk0p2 rw rootwait"
+#define CONFIG_BOOTCOMMAND	"fatload mmc 0:1 0x71000000 dtb; " \
+				"fatload mmc 0:1 0x72000000 zImage; " \
+				"bootz 0x72000000 - 0x71000000"
+#endif
 
 #define CONFIG_BAUDRATE			115200
 
diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h
index e23549d..9b0e588 100644
--- a/include/configs/at91sam9n12ek.h
+++ b/include/configs/at91sam9n12ek.h
@@ -18,9 +18,6 @@
 
 #define CONFIG_SYS_TEXT_BASE		0x26f00000
 
-#define CONFIG_ARM926EJS
-#define CONFIG_AT91FAMILY
-
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768		/* slow clock xtal */
 #define CONFIG_SYS_AT91_MAIN_CLOCK	16000000	/* main clock xtal */
diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h
index f0a6757..b1d4baa 100644
--- a/include/configs/at91sam9x5ek.h
+++ b/include/configs/at91sam9x5ek.h
@@ -18,7 +18,6 @@
 #define CONFIG_SYS_AT91_MAIN_CLOCK	12000000	/* 12 MHz crystal */
 
 #define CONFIG_AT91SAM9X5EK
-#define CONFIG_AT91FAMILY
 
 #define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
 #define CONFIG_SETUP_MEMORY_TAGS
@@ -30,6 +29,8 @@
 #define CONFIG_CMD_BOOTZ
 #define CONFIG_OF_LIBFDT
 
+#define CONFIG_SYS_GENERIC_BOARD
+
 /* general purpose I/O */
 #define CONFIG_ATMEL_LEGACY		/* required until (g)pio is fixed */
 #define CONFIG_AT91_GPIO
diff --git a/include/configs/atngw100mkii.h b/include/configs/atngw100mkii.h
index 066d09a..7b4f9cf 100644
--- a/include/configs/atngw100mkii.h
+++ b/include/configs/atngw100mkii.h
@@ -151,6 +151,7 @@
 #define CONFIG_SYS_MAX_FLASH_SECT	135
 
 #define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_TEXT_BASE		0x00000000
 
 #define CONFIG_SYS_INTRAM_BASE		INTERNAL_SRAM_BASE
 #define CONFIG_SYS_INTRAM_SIZE		INTERNAL_SRAM_SIZE
diff --git a/include/configs/bcm28155_ap.h b/include/configs/bcm28155_ap.h
index e93b855..bf09939 100644
--- a/include/configs/bcm28155_ap.h
+++ b/include/configs/bcm28155_ap.h
@@ -14,6 +14,7 @@
 #define CONFIG_ARMV7
 #define CONFIG_KONA
 #define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SYS_GENERIC_BOARD
 
 /*
  * Memory configuration
diff --git a/include/configs/beaver.h b/include/configs/beaver.h
index 9ff089e..ae83112 100644
--- a/include/configs/beaver.h
+++ b/include/configs/beaver.h
@@ -76,6 +76,7 @@
 /* USB Host support */
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_TEGRA
+#define CONFIG_USB_MAX_CONTROLLER_COUNT	2
 #define CONFIG_USB_STORAGE
 #define CONFIG_CMD_USB
 
@@ -87,6 +88,7 @@
 #define CONFIG_CMD_NET
 #define CONFIG_CMD_DHCP
 
+#include "tegra-common-ums.h"
 #include "tegra-common-post.h"
 
 #endif /* __CONFIG_H */
diff --git a/include/configs/bur_am335x_common.h b/include/configs/bur_am335x_common.h
index 7adc8c0..5a37536 100644
--- a/include/configs/bur_am335x_common.h
+++ b/include/configs/bur_am335x_common.h
@@ -12,6 +12,8 @@
 #ifndef __BUR_AM335X_COMMON_H__
 #define __BUR_AM335X_COMMON_H__
 /* ------------------------------------------------------------------------- */
+#define CONFIG_SYS_GENERIC_BOARD
+
 #define CONFIG_AM33XX
 #define CONFIG_OMAP
 #define CONFIG_OMAP_COMMON
@@ -94,7 +96,7 @@
 #define CONFIG_SYS_OMAP24_I2C_SPEED	100000
 #define CONFIG_SYS_OMAP24_I2C_SLAVE	1
 #define CONFIG_SYS_I2C_OMAP24XX
-
+#define CONFIG_CMD_I2C
 /* GPIO */
 #define CONFIG_OMAP_GPIO
 #define CONFIG_CMD_GPIO
diff --git a/include/configs/calimain.h b/include/configs/calimain.h
index febee45..b27f973 100644
--- a/include/configs/calimain.h
+++ b/include/configs/calimain.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2011 OMICRON electronics GmbH
+ * Copyright (C) 2011-2014 OMICRON electronics GmbH
  *
  * Based on da850evm.h. Original Copyrights follow:
  *
@@ -18,6 +18,7 @@
 #define CONFIG_DRIVER_TI_EMAC
 #define MACH_TYPE_CALIMAIN	3528
 #define CONFIG_MACH_TYPE	MACH_TYPE_CALIMAIN
+#define CONFIG_SYS_GENERIC_BOARD
 
 /*
  * SoC Configuration
diff --git a/include/configs/cm_t335.h b/include/configs/cm_t335.h
index 26b615b..4d1dd28 100644
--- a/include/configs/cm_t335.h
+++ b/include/configs/cm_t335.h
@@ -141,7 +141,6 @@
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x200000
 
 #define CONFIG_CMD_NAND
-#define GPMC_NAND_ECC_LP_x8_LAYOUT
 #define MTDIDS_DEFAULT			"nand0=nand"
 #define MTDPARTS_DEFAULT		"mtdparts=nand:2m(spl)," \
 					"1m(u-boot),1m(u-boot-env)," \
diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h
index aae05e0..5c484ef 100644
--- a/include/configs/cm_t35.h
+++ b/include/configs/cm_t35.h
@@ -104,8 +104,6 @@
 #define CONFIG_USB_DEVICE
 #define CONFIG_USB_TTY
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
-/* This delay is really for slow-to-power-on USB sticks, not the hub */
-#define CONFIG_USB_HUB_MIN_POWER_ON_DELAY 500
 
 /* commands to include */
 #include <config_cmd_default.h>
@@ -158,7 +156,6 @@
 							/* CS0 */
 #define CONFIG_SYS_MAX_NAND_DEVICE	1		/* Max number of NAND */
 							/* devices */
-#define GPMC_NAND_ECC_LP_x8_LAYOUT
 
 /* Environment information */
 #define CONFIG_BOOTDELAY		3
diff --git a/include/configs/controlcenterd.h b/include/configs/controlcenterd.h
index 868813f..ec3145f 100644
--- a/include/configs/controlcenterd.h
+++ b/include/configs/controlcenterd.h
@@ -199,9 +199,10 @@
 #define CONFIG_SYS_FSL_I2C2_SPEED	400000
 #define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
 #define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
-/* Probing DP501 I2C-Bridge will hang */
-#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x30}, {0, 0x37}, {0, 0x3a}, \
-					  {0, 0x3b}, {0, 0x50} }
+
+#ifndef CONFIG_TRAILBLAZER
+#define CONFIG_CMD_I2C
+#endif
 
 #define CONFIG_PCA9698			/* NXP PCA9698 */
 
diff --git a/include/configs/corvus.h b/include/configs/corvus.h
index 959e188..6171060 100644
--- a/include/configs/corvus.h
+++ b/include/configs/corvus.h
@@ -27,15 +27,12 @@
 
 #define CONFIG_SYS_TEXT_BASE  0x73f00000
 
-#define CONFIG_AT91_LEGACY
 #define CONFIG_ATMEL_LEGACY		/* required until (g)pio is fixed */
 
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_SLOW_CLOCK      32768
 #define CONFIG_SYS_AT91_MAIN_CLOCK      12000000 /* from 12 MHz crystal */
 
-#define CONFIG_AT91FAMILY
-
 #define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs	*/
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
diff --git a/include/configs/cpu9260.h b/include/configs/cpu9260.h
index 39f7062..1feaefd 100644
--- a/include/configs/cpu9260.h
+++ b/include/configs/cpu9260.h
@@ -32,7 +32,6 @@
 
 #include <asm/arch/hardware.h>
 
-#define CONFIG_AT91FAMILY
 #define CONFIG_ARCH_CPU_INIT
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_BOARD_EARLY_INIT_F
diff --git a/include/configs/davinci_dm6467evm.h b/include/configs/davinci_dm6467evm.h
index 8a3c453..b1b18ad 100644
--- a/include/configs/davinci_dm6467evm.h
+++ b/include/configs/davinci_dm6467evm.h
@@ -78,6 +78,8 @@ extern unsigned int davinci_arm_clk_get(void);
 #define CONFIG_SYS_NO_FLASH
 #ifdef CONFIG_SYS_USE_NAND
 #define CONFIG_NAND_DAVINCI
+#define CONFIG_SYS_NAND_MASK_CLE	0x80000
+#define CONFIG_SYS_NAND_MASK_ALE	0x40000
 #define CONFIG_SYS_NAND_CS		2
 #undef CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_ENV_IS_IN_NAND
diff --git a/include/configs/debris.h b/include/configs/debris.h
deleted file mode 100644
index 4631b86..0000000
--- a/include/configs/debris.h
+++ /dev/null
@@ -1,443 +0,0 @@
-/*
- * (C) Copyright 2001, 2002
- * Sangmoon Kim, Etin Systems, dogoil@etinsys.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define	CONFIG_SYS_TEXT_BASE	0xFFF00000
-
-/* Environments */
-
-/* bootargs */
-#define CONFIG_BOOTARGS \
-	"console=ttyS0,9600 init=/linuxrc " \
-	"root=/dev/nfs rw nfsroot=192.168.0.1:" \
-	"/tftpboot/target " \
-	"ip=192.168.0.2:192.168.0.1:192.168.0.1:" \
-	"255.255.255.0:debris:eth0:none " \
-	"mtdparts=phys:12m(root),-(kernel)"
-
-/* bootcmd */
-#define CONFIG_BOOTCOMMAND \
-	"tftp 800000 pImage; " \
-	"setenv bootargs console=ttyS0,9600 init=/linuxrc " \
-	"root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
-	"ip=${ipaddr}:${serverip}:${gatewayip}:" \
-	"${netmask}:${hostname}:eth0:none " \
-	"mtdparts=phys:12m(root),-(kernel); " \
-	"bootm 800000"
-
-/* bootdelay */
-#define CONFIG_BOOTDELAY	5	/* autoboot 5s */
-
-/* baudrate */
-#define CONFIG_BAUDRATE		9600	/* console baudrate = 9600bps	*/
-
-/* loads_echo */
-#define CONFIG_LOADS_ECHO	0	/* echo off for serial download */
-
-/* ethaddr */
-#undef CONFIG_ETHADDR
-
-/* eth2addr */
-#undef CONFIG_ETH2ADDR
-
-/* eth3addr */
-#undef CONFIG_ETH3ADDR
-
-/* ipaddr */
-#define CONFIG_IPADDR	192.168.0.2
-
-/* serverip */
-#define CONFIG_SERVERIP	192.168.0.1
-
-/* autoload */
-#undef CONFIG_SYS_AUTOLOAD
-
-/* rootpath */
-#define CONFIG_ROOTPATH "/tftpboot/target"
-
-/* gatewayip */
-#define CONFIG_GATEWAYIP 192.168.0.1
-
-/* netmask */
-#define CONFIG_NETMASK 255.255.255.0
-
-/* hostname */
-#define CONFIG_HOSTNAME debris
-
-/* bootfile */
-#define CONFIG_BOOTFILE "pImage"
-
-/* loadaddr */
-#define CONFIG_LOADADDR 800000
-
-/* preboot */
-#undef CONFIG_PREBOOT
-
-/* clocks_in_mhz */
-#undef CONFIG_CLOCKS_IN_MHZ
-
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC8245		1
-#define CONFIG_DEBRIS		1
-
-#if 0
-#define USE_DINK32		1
-#else
-#undef USE_DINK32
-#endif
-
-#define CONFIG_CONS_INDEX       1
-#define CONFIG_BAUDRATE		9600
-#define CONFIG_DRAM_SPEED	100		/* MHz */
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_KGDB
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SAVES
-#define CONFIG_CMD_SDRAM
-
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP		1		/* undef to save memory		*/
-#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size	*/
-#define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-#define CONFIG_SYS_LOAD_ADDR		0x00100000	/* default load address		*/
-
-/*-----------------------------------------------------------------------
- * PCI stuff
- *-----------------------------------------------------------------------
- */
-#define CONFIG_PCI				/* include pci support		*/
-#define CONFIG_PCI_INDIRECT_BRIDGE	/* indirect PCI bridge support */
-#define CONFIG_PCI_PNP
-
-#define CONFIG_EEPRO100
-#define CONFIG_SYS_RX_ETH_BUFFER	8	/* use 8 rx buffer on eepro100  */
-#define CONFIG_EEPRO100_SROM_WRITE
-
-#define PCI_ENET0_IOADDR	0x80000000
-#define PCI_ENET0_MEMADDR	0x80000000
-#define	PCI_ENET1_IOADDR	0x81000000
-#define	PCI_ENET1_MEMADDR	0x81000000
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_MAX_RAM_SIZE	0x20000000
-#define CONFIG_VERY_BIG_RAM
-
-#define CONFIG_SYS_RESET_ADDRESS	0xFFF00100
-
-#if defined (USE_DINK32)
-#define CONFIG_SYS_MONITOR_LEN		0x00040000
-#define CONFIG_SYS_MONITOR_BASE	0x00090000
-#define CONFIG_SYS_RAMBOOT		1
-#define CONFIG_SYS_INIT_RAM_ADDR	(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
-#define CONFIG_SYS_INIT_RAM_SIZE	0x10000
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-#else
-#undef	CONFIG_SYS_RAMBOOT
-#define CONFIG_SYS_MONITOR_LEN		0x00040000
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE
-
-
-#define CONFIG_SYS_INIT_RAM_ADDR     0x40000000
-#define CONFIG_SYS_INIT_RAM_SIZE      0x1000
-#define CONFIG_SYS_GBL_DATA_OFFSET  (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-
-#endif
-
-#define CONFIG_SYS_FLASH_BASE		0x7C000000
-#define CONFIG_SYS_FLASH_SIZE		(16*1024*1024)	/* debris has tiny eeprom	*/
-
-#define CONFIG_SYS_MALLOC_LEN		(512 << 10)	/* Reserve 512 kB for malloc()	*/
-
-#define CONFIG_SYS_MEMTEST_START	0x00000000	/* memtest works on		*/
-#define CONFIG_SYS_MEMTEST_END		0x04000000	/* 0 ... 32 MB in DRAM		*/
-
-#define CONFIG_SYS_EUMB_ADDR		0xFC000000
-
-#define CONFIG_SYS_FLASH_RANGE_BASE	0xFF000000	/* flash memory address range	*/
-#define CONFIG_SYS_FLASH_RANGE_SIZE	0x01000000
-#define FLASH_BASE0_PRELIM	0x7C000000	/* debris flash		*/
-
-/*
- * JFFS2 partitions
- *
- */
-/* No command line, one static partition, whole device */
-#undef CONFIG_CMD_MTDPARTS
-#define CONFIG_JFFS2_DEV		"nor0"
-#define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
-#define CONFIG_JFFS2_PART_OFFSET	0x00000000
-
-/* mtdparts command line support */
-
-/* Use first bank for JFFS2, second bank contains U-Boot.
- *
- * Note: fake mtd_id's used, no linux mtd map file.
- */
-/*
-#define CONFIG_CMD_MTDPARTS
-#define MTDIDS_DEFAULT		"nor0=debris-0"
-#define MTDPARTS_DEFAULT	"mtdparts=debris-0:-(jffs2)"
-*/
-
-#define CONFIG_ENV_IS_IN_NVRAM      1
-#define CONFIG_ENV_OVERWRITE     1
-#define CONFIG_SYS_NVRAM_ACCESS_ROUTINE 1
-#define CONFIG_ENV_ADDR		0xFF000000 /* right at the start of NVRAM  */
-#define CONFIG_ENV_SIZE		0x400	/* Size of the Environment - 8K	   */
-#define CONFIG_ENV_OFFSET		0	/* starting right at the beginning */
-
-#define CONFIG_SYS_NVRAM_BASE_ADDR	0xff000000
-
-/*
- * CONFIG_SYS_NVRAM_BASE_ADDR + CONFIG_SYS_NVRAM_VXWORKS_OFFS =
- * NV_RAM_ADDRS + NV_BOOT_OFFSET + NV_ENET_OFFSET
- */
-#define CONFIG_SYS_NVRAM_VXWORKS_OFFS	0x6900
-
-/*
- * select i2c support configuration
- *
- * Supported configurations are {none, software, hardware} drivers.
- * If the software driver is chosen, there are some additional
- * configuration items that the driver uses to drive the port pins.
- */
-#define CONFIG_HARD_I2C		1		/* To enable I2C support	*/
-#undef  CONFIG_SYS_I2C_SOFT			/* I2C bit-banged */
-#define CONFIG_SYS_I2C_SPEED		400000		/* I2C speed and slave address	*/
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-
-#ifdef CONFIG_SYS_I2C_SOFT
-#error "Soft I2C is not configured properly.  Please review!"
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_SOFT_SPEED	50000
-#define CONFIG_SYS_I2C_SOFT_SLAVE	0x7F
-#define I2C_PORT		3               /* Port A=0, B=1, C=2, D=3 */
-#define I2C_ACTIVE		(iop->pdir |=  0x00010000)
-#define I2C_TRISTATE		(iop->pdir &= ~0x00010000)
-#define I2C_READ		((iop->pdat & 0x00010000) != 0)
-#define I2C_SDA(bit)		if(bit) iop->pdat |=  0x00010000; \
-				else    iop->pdat &= ~0x00010000
-#define I2C_SCL(bit)		if(bit) iop->pdat |=  0x00020000; \
-				else    iop->pdat &= ~0x00020000
-#define I2C_DELAY		udelay(5)	/* 1/4 I2C clock duration */
-#endif /* CONFIG_SYS_I2C_SOFT */
-
-#define CONFIG_SYS_I2C_EEPROM_ADDR	0x57		/* EEPROM IS24C02		*/
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1		/* Bytes of address		*/
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10	/* and takes up to 10 msec */
-
-#define CONFIG_SYS_FLASH_BANKS		{ FLASH_BASE0_PRELIM }
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-
-/*
- * NS16550 Configuration
- */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-
-#define CONFIG_SYS_NS16550_REG_SIZE	1
-
-#define CONFIG_SYS_NS16550_CLK		7372800
-
-#define CONFIG_SYS_NS16550_COM1	0xFF080000
-#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_NS16550_COM1 + 8)
-#define CONFIG_SYS_NS16550_COM3	(CONFIG_SYS_NS16550_COM1 + 16)
-#define CONFIG_SYS_NS16550_COM4	(CONFIG_SYS_NS16550_COM1 + 24)
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-
-#define CONFIG_SYS_CLK_FREQ  33333333	/* external frequency to pll */
-#define CONFIG_PLL_PCI_TO_MEM_MULTIPLIER 3
-
-#define CONFIG_SYS_DLL_EXTEND		0x00
-#define CONFIG_SYS_PCI_HOLD_DEL	0x20
-
-#define CONFIG_SYS_ROMNAL	15	/* rom/flash next access time */
-#define CONFIG_SYS_ROMFAL	31	/* rom/flash access time */
-
-#define CONFIG_SYS_REFINT	430	/* # of clocks between CBR refresh cycles */
-
-#define CONFIG_SYS_DBUS_SIZE2	1	/* set for 8-bit RCS1, clear for 32,64 */
-
-/* the following are for SDRAM only*/
-#define CONFIG_SYS_BSTOPRE	121	/* Burst To Precharge, sets open page interval */
-#define CONFIG_SYS_REFREC	8	/* Refresh to activate interval		*/
-#define CONFIG_SYS_RDLAT	4	/* data latency from read command	*/
-#define CONFIG_SYS_PRETOACT	3	/* Precharge to activate interval	*/
-#define CONFIG_SYS_ACTTOPRE	5	/* Activate to Precharge interval	*/
-#define CONFIG_SYS_ACTORW		3	/* Activate to R/W			*/
-#define CONFIG_SYS_SDMODE_CAS_LAT	3	/* SDMODE CAS latency			*/
-#define CONFIG_SYS_SDMODE_WRAP		0	/* SDMODE wrap type			*/
-#if 0
-#define CONFIG_SYS_SDMODE_BURSTLEN	2	/* OBSOLETE!  SDMODE Burst length 2=4, 3=8		*/
-#endif
-
-#define CONFIG_SYS_REGISTERD_TYPE_BUFFER   1
-#define CONFIG_SYS_EXTROM 1
-#define CONFIG_SYS_REGDIMM 0
-
-
-/* memory bank settings*/
-/*
- * only bits 20-29 are actually used from these vales to set the
- * start/end address the upper two bits will be 0, and the lower 20
- * bits will be set to 0x00000 for a start address, or 0xfffff for an
- * end address
- */
-#define CONFIG_SYS_BANK0_START		0x00000000
-#define CONFIG_SYS_BANK0_END		(0x4000000 - 1)
-#define CONFIG_SYS_BANK0_ENABLE	1
-#define CONFIG_SYS_BANK1_START		0x04000000
-#define CONFIG_SYS_BANK1_END		(0x8000000 - 1)
-#define CONFIG_SYS_BANK1_ENABLE	1
-#define CONFIG_SYS_BANK2_START		0x3ff00000
-#define CONFIG_SYS_BANK2_END		0x3fffffff
-#define CONFIG_SYS_BANK2_ENABLE	0
-#define CONFIG_SYS_BANK3_START		0x3ff00000
-#define CONFIG_SYS_BANK3_END		0x3fffffff
-#define CONFIG_SYS_BANK3_ENABLE	0
-#define CONFIG_SYS_BANK4_START		0x00000000
-#define CONFIG_SYS_BANK4_END		0x00000000
-#define CONFIG_SYS_BANK4_ENABLE	0
-#define CONFIG_SYS_BANK5_START		0x00000000
-#define CONFIG_SYS_BANK5_END		0x00000000
-#define CONFIG_SYS_BANK5_ENABLE	0
-#define CONFIG_SYS_BANK6_START		0x00000000
-#define CONFIG_SYS_BANK6_END		0x00000000
-#define CONFIG_SYS_BANK6_ENABLE	0
-#define CONFIG_SYS_BANK7_START		0x00000000
-#define CONFIG_SYS_BANK7_END		0x00000000
-#define CONFIG_SYS_BANK7_ENABLE	0
-/*
- * Memory bank enable bitmask, specifying which of the banks defined above
- are actually present. MSB is for bank #7, LSB is for bank #0.
- */
-#define CONFIG_SYS_BANK_ENABLE		0x01
-
-#define CONFIG_SYS_ODCR		0x75	/* configures line driver impedances,	*/
-					/* see 8240 book for bit definitions	*/
-#define CONFIG_SYS_PGMAX		0x32	/* how long the 8240 retains the	*/
-					/* currently accessed page in memory	*/
-					/* see 8240 book for details		*/
-
-/* SDRAM 0 - 256MB */
-#define CONFIG_SYS_IBAT0L	(CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT0U	(CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-
-/* stack in DCACHE @ 1GB (no backing mem) */
-#if defined(USE_DINK32)
-#define CONFIG_SYS_IBAT1L	(0x40000000 | BATL_PP_00 )
-#define CONFIG_SYS_IBAT1U	(0x40000000 | BATU_BL_128K )
-#else
-#define CONFIG_SYS_IBAT1L	(CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT1U	(CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
-#endif
-
-/* PCI memory */
-#define CONFIG_SYS_IBAT2L	(0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT2U	(0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-/* Flash, config addrs, etc */
-#define CONFIG_SYS_IBAT3L	(0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT3U	(0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_DBAT0L	CONFIG_SYS_IBAT0L
-#define CONFIG_SYS_DBAT0U	CONFIG_SYS_IBAT0U
-#define CONFIG_SYS_DBAT1L	CONFIG_SYS_IBAT1L
-#define CONFIG_SYS_DBAT1U	CONFIG_SYS_IBAT1U
-#define CONFIG_SYS_DBAT2L	CONFIG_SYS_IBAT2L
-#define CONFIG_SYS_DBAT2U	CONFIG_SYS_IBAT2U
-#define CONFIG_SYS_DBAT3L	CONFIG_SYS_IBAT3L
-#define CONFIG_SYS_DBAT3U	CONFIG_SYS_IBAT3U
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC8240 CPU			*/
-#if defined(CONFIG_CMD_KGDB)
-#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
-#endif
-
-/* values according to the manual */
-
-#define CONFIG_DRAM_50MHZ	1
-#define CONFIG_SDRAM_50MHZ
-
-#define CONFIG_DISK_SPINUP_TIME 1000000
-
-#endif	/* __CONFIG_H */
diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h
index 16a00eb..5308790 100644
--- a/include/configs/devkit8000.h
+++ b/include/configs/devkit8000.h
@@ -314,6 +314,7 @@
 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000
 
 /* NAND boot config */
+#define CONFIG_SYS_NAND_BUSWIDTH_16BIT	16
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_PAGE_COUNT	64
 #define CONFIG_SYS_NAND_PAGE_SIZE	2048
diff --git a/include/configs/dig297.h b/include/configs/dig297.h
index af6f56b..ce205e9 100644
--- a/include/configs/dig297.h
+++ b/include/configs/dig297.h
@@ -138,6 +138,7 @@
  * Board NAND Info.
  */
 #define CONFIG_NAND_OMAP_GPMC
+#define CONFIG_SYS_NAND_BUSWIDTH_16BIT	16
 #define CONFIG_SYS_NAND_ADDR		NAND_BASE	/* physical address */
 							/* to access nand */
 #define CONFIG_SYS_NAND_BASE		NAND_BASE	/* physical address */
diff --git a/include/configs/dlvision-10g.h b/include/configs/dlvision-10g.h
index 7877897..6153a40 100644
--- a/include/configs/dlvision-10g.h
+++ b/include/configs/dlvision-10g.h
@@ -17,7 +17,7 @@
  * Include common defines/options for all AMCC eval boards
  */
 #define CONFIG_HOSTNAME		dlvsion-10g
-#define CONFIG_IDENT_STRING	" dlvision-10g 0.05"
+#define CONFIG_IDENT_STRING	" dlvision-10g 0.06"
 #include "amcc-common.h"
 
 #define CONFIG_BOARD_EARLY_INIT_F
@@ -40,6 +40,7 @@
 /* new uImage format support */
 #define CONFIG_FIT
 #define CONFIG_FIT_VERBOSE	/* enable fit_format_{error,warning}() */
+#define CONFIG_FIT_DISABLE_SHA256
 
 #define CONFIG_ENV_IS_IN_FLASH	/* use FLASH for environment vars */
 
@@ -64,9 +65,14 @@
 /*
  * Commands additional to the ones defined in amcc-common.h
  */
-#define CONFIG_CMD_CACHE
 #define CONFIG_CMD_DTT
+#undef CONFIG_CMD_DHCP
+#undef CONFIG_CMD_DIAG
 #undef CONFIG_CMD_EEPROM
+#undef CONFIG_CMD_ELF
+#undef CONFIG_CMD_I2C
+#undef CONFIG_CMD_IRQ
+#undef CONFIG_CMD_NFS
 
 /*
  * SDRAM configuration (please see cpu/ppc/sdram.[ch])
@@ -97,9 +103,23 @@
 /*
  * I2C stuff
  */
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
 #define CONFIG_SYS_I2C_PPC4XX_SPEED_0		100000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0		0x7F
+
+#define CONFIG_SYS_I2C_IHS
+#define CONFIG_SYS_I2C_IHS_CH0
+#define CONFIG_SYS_I2C_IHS_SPEED_0		50000
+#define CONFIG_SYS_I2C_IHS_SLAVE_0		0x7F
+#define CONFIG_SYS_I2C_IHS_CH1
+#define CONFIG_SYS_I2C_IHS_SPEED_1		50000
+#define CONFIG_SYS_I2C_IHS_SLAVE_1		0x7F
+
+#define CONFIG_SYS_SPD_BUS_NUM		2
 
 /* Temp sensor/hwmon/dtt */
+#define CONFIG_SYS_DTT_BUS_NUM	2
 #define CONFIG_DTT_LM63		1	/* National LM63	*/
 #define CONFIG_DTT_SENSORS	{ 0x4c, 0x4e, 0x18 } /* Sensor addresses */
 #define CONFIG_DTT_PWM_LOOKUPTABLE	\
@@ -107,6 +127,9 @@
 		  { 54, 27 }, { 56, 31 }, { 58, 36 }, { 60, 40 } }
 #define CONFIG_DTT_TACH_LIMIT	0xa10
 
+#define CONFIG_SYS_ICS8N3QV01_I2C	{0, 1}
+#define CONFIG_SYS_SIL1178_I2C		{0, 1}
+
 /* EBC peripherals */
 
 #define CONFIG_SYS_FLASH_BASE		0xFC000000
@@ -306,9 +329,7 @@
 /*
  * OSD Setup
  */
-#define CONFIG_SYS_ICS8N3QV01
 #define CONFIG_SYS_MPC92469AC
-#define CONFIG_SYS_SIL1178
 #define CONFIG_SYS_OSD_SCREENS		CONFIG_SYS_FPGA_COUNT
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/edb93xx.h b/include/configs/edb93xx.h
new file mode 100644
index 0000000..37bdcc0
--- /dev/null
+++ b/include/configs/edb93xx.h
@@ -0,0 +1,292 @@
+/*
+ * U-boot - Configuration file for Cirrus Logic EDB93xx boards
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#ifdef CONFIG_MK_edb9301
+#define CONFIG_EDB9301
+#elif defined(CONFIG_MK_edb9302)
+#define CONFIG_EDB9302
+#elif defined(CONFIG_MK_edb9302a)
+#define CONFIG_EDB9302A
+#elif defined(CONFIG_MK_edb9307)
+#define CONFIG_EDB9307
+#elif defined(CONFIG_MK_edb9307a)
+#define CONFIG_EDB9307A
+#elif defined(CONFIG_MK_edb9312)
+#define CONFIG_EDB9312
+#elif defined(CONFIG_MK_edb9315)
+#define CONFIG_EDB9315
+#elif defined(CONFIG_MK_edb9315a)
+#define CONFIG_EDB9315A
+#else
+#error "no board defined"
+#endif
+
+/* Initial environment and monitor configuration options. */
+#define CONFIG_BOOTDELAY		2
+#define CONFIG_CMDLINE_TAG		1
+#define CONFIG_INITRD_TAG		1
+#define CONFIG_SETUP_MEMORY_TAGS	1
+#define CONFIG_BOOTARGS		"root=/dev/nfs console=ttyAM0,115200 ip=dhcp"
+#define CONFIG_BOOTFILE		"edb93xx.img"
+
+#define CONFIG_SYS_HUSH_PARSER		1
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+
+
+#define CONFIG_SYS_LDSCRIPT	"board/cirrus/edb93xx/u-boot.lds"
+
+
+#ifdef CONFIG_EDB9301
+#define CONFIG_EP9301
+#define CONFIG_MACH_TYPE		MACH_TYPE_EDB9301
+#define CONFIG_SYS_PROMPT		"EDB9301> "
+#define CONFIG_ENV_SECT_SIZE		0x00020000
+#elif defined(CONFIG_EDB9302)
+#define CONFIG_EP9302
+#define CONFIG_MACH_TYPE		MACH_TYPE_EDB9302
+#define CONFIG_SYS_PROMPT		"EDB9302> "
+#define CONFIG_ENV_SECT_SIZE		0x00020000
+#elif defined(CONFIG_EDB9302A)
+#define CONFIG_EP9302
+#define CONFIG_MACH_TYPE		MACH_TYPE_EDB9302A
+#define CONFIG_SYS_PROMPT		"EDB9302A> "
+#define CONFIG_ENV_SECT_SIZE		0x00020000
+#elif defined(CONFIG_EDB9307)
+#define CONFIG_EP9307
+#define CONFIG_MACH_TYPE		MACH_TYPE_EDB9307
+#define CONFIG_SYS_PROMPT		"EDB9307> "
+#define CONFIG_ENV_SECT_SIZE		0x00040000
+#elif defined(CONFIG_EDB9307A)
+#define CONFIG_EP9307
+#define CONFIG_MACH_TYPE		MACH_TYPE_EDB9307A
+#define CONFIG_SYS_PROMPT		"EDB9307A> "
+#define CONFIG_ENV_SECT_SIZE		0x00020000
+#elif defined(CONFIG_EDB9312)
+#define CONFIG_EP9312
+#define CONFIG_MACH_TYPE		MACH_TYPE_EDB9312
+#define CONFIG_SYS_PROMPT		"EDB9312> "
+#define CONFIG_ENV_SECT_SIZE		0x00040000
+#elif defined(CONFIG_EDB9315)
+#define CONFIG_EP9315
+#define CONFIG_MACH_TYPE		MACH_TYPE_EDB9315
+#define CONFIG_SYS_PROMPT		"EDB9315> "
+#define CONFIG_ENV_SECT_SIZE		0x00040000
+#elif defined(CONFIG_EDB9315A)
+#define CONFIG_EP9315
+#define CONFIG_MACH_TYPE		MACH_TYPE_EDB9315A
+#define CONFIG_SYS_PROMPT		"EDB9315A> "
+#define CONFIG_ENV_SECT_SIZE		0x00020000
+#else
+#error "no board defined"
+#endif
+
+/* High-level configuration options */
+#define CONFIG_ARM920T		1		/* This is an ARM920T core... */
+#define CONFIG_EP93XX		1		/* in a Cirrus Logic 93xx SoC */
+
+#define CONFIG_SYS_CLK_FREQ	14745600	/* EP93xx has a 14.7456 clock */
+#define CONFIG_SYS_HZ		1000		/* decr freq: 1 ms ticks */
+#undef CONFIG_USE_IRQ				/* Don't need IRQ/FIQ */
+
+/* Monitor configuration */
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_SETGETDCR
+#undef CONFIG_CMD_XIMG
+
+#undef CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_JFFS2
+
+#define CONFIG_SYS_LONGHELP			/* Enable "long" help in mon */
+#define CONFIG_SYS_CBSIZE		1024	/* Console I/O buffer size */
+/* Print buffer size */
+#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+/* Boot argument buffer size */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
+#define CONFIG_SYS_MAXARGS	16		/* Max number of command args */
+
+/* Serial port hardware configuration */
+#define CONFIG_PL010_SERIAL
+#define CONFIG_CONS_INDEX		0
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_SYS_BAUDRATE_TABLE	{9600, 19200, 38400, 57600, \
+                        115200, 230400}
+#define CONFIG_SYS_SERIAL0		0x808C0000
+#define CONFIG_SYS_SERIAL1		0x808D0000
+/*#define CONFIG_PL01x_PORTS	{(void *)CONFIG_SYS_SERIAL0, \
+            (void *)CONFIG_SYS_SERIAL1} */
+
+#define CONFIG_PL01x_PORTS	{(void *)CONFIG_SYS_SERIAL0}
+
+/* Status LED */
+#define CONFIG_STATUS_LED		1 /* Status LED enabled	*/
+#define CONFIG_BOARD_SPECIFIC_LED	1
+#define STATUS_LED_GREEN		0
+#define STATUS_LED_RED			1
+/* Green */
+#define STATUS_LED_BIT			STATUS_LED_GREEN
+#define STATUS_LED_STATE		STATUS_LED_ON
+#define STATUS_LED_PERIOD		(CONFIG_SYS_HZ / 2)
+/* Red */
+#define STATUS_LED_BIT1			STATUS_LED_RED
+#define STATUS_LED_STATE1		STATUS_LED_OFF
+#define STATUS_LED_PERIOD1		(CONFIG_SYS_HZ / 2)
+/* Optional value */
+#define STATUS_LED_BOOT			STATUS_LED_BIT
+
+/* Network hardware configuration */
+#define CONFIG_DRIVER_EP93XX_MAC
+#define CONFIG_MII_SUPPRESS_PREAMBLE
+#define CONFIG_MII
+#define CONFIG_PHY_ADDR		1
+#define CONFIG_NET_MULTI
+#undef CONFIG_NETCONSOLE
+
+/* SDRAM configuration */
+#if defined(CONFIG_EDB9301) || defined(CONFIG_EDB9302) || \
+    defined(CONFIG_EDB9307) || defined CONFIG_EDB9312 || \
+    defined(CONFIG_EDB9315)
+/*
+ * EDB9301/2 has 4 banks of SDRAM consisting of 1x Samsung K4S561632E-TC75
+ * 256 Mbit SDRAM on a 16-bit data bus, for a total of 32MB of SDRAM. We set
+ * the SROMLL bit on the processor, resulting in this non-contiguous memory map.
+ *
+ * The EDB9307, EDB9312, and EDB9315 have 2 banks of SDRAM consisting of
+ * 2x Samsung K4S561632E-TC75 256 Mbit on a 32-bit data bus, for a total of
+ * 64 MB of SDRAM.
+ */
+
+#define CONFIG_EDB93XX_SDCS3
+
+#elif defined(CONFIG_EDB9302A) || \
+    defined(CONFIG_EDB9307A) || defined(CONFIG_EDB9315A)
+/*
+ * EDB9302a has 4 banks of SDRAM consisting of 1x Samsung K4S561632E-TC75
+ * 256 Mbit SDRAM on a 16-bit data bus, for a total of 32MB of SDRAM. We set
+ * the SROMLL bit on the processor, resulting in this non-contiguous memory map.
+ *
+ * The EDB9307A and EDB9315A have 2 banks of SDRAM consisting of 2x Samsung
+ * K4S561632E-TC75 256 Mbit on a 32-bit data bus, for a total of 64 MB of SDRAM.
+ */
+#define CONFIG_EDB93XX_SDCS0
+
+#else
+#error "no SDCS configuration for this board"
+#endif
+
+
+#if defined(CONFIG_EDB93XX_SDCS3)
+#define CONFIG_SYS_LOAD_ADDR	0x01000000	/* Default load address	*/
+#define PHYS_SDRAM_1		0x00000000
+#elif defined(CONFIG_EDB93XX_SDCS0)
+#define CONFIG_SYS_LOAD_ADDR	0xc1000000	/* Default load address	*/
+#define PHYS_SDRAM_1		0xc0000000
+#endif
+
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
+#define CONFIG_NR_DRAM_BANKS		8
+
+#define CONFIG_SYS_INIT_SP_ADDR \
+    (CONFIG_SYS_SDRAM_BASE + 32*1024 - GENERATED_GBL_DATA_SIZE)
+
+
+/* Must match kernel config */
+#define LINUX_BOOT_PARAM_ADDR	(PHYS_SDRAM_1 + 0x100)
+
+/* Run-time memory allocatons */
+#define CONFIG_SYS_GBL_DATA_SIZE	128
+#define CONFIG_STACKSIZE		(128 * 1024)
+
+#if defined(CONFIG_USE_IRQ)
+#define CONFIG_STACKSIZE_IRQ	(4 * 1024)
+#define CONFIG_STACKSIZE_FIQ	(4 * 1024)
+#endif
+
+#define CONFIG_SYS_MALLOC_LEN		(512 * 1024)
+
+/* -----------------------------------------------------------------------------
+ * FLASH and environment organization
+ *
+ * The EDB9301, EDB9302(a), EDB9307a, EDB9315a have 1 bank of flash memory at
+ * 0x60000000 consisting of 1x Intel TE28F128J3C-150 128 Mbit flash on a 16-bit
+ * data bus, for a total of 16 MB of CFI-compatible flash.
+ *
+ * The EDB9307, EDB9312, and EDB9315 have 1 bank of flash memory at
+ * 0x60000000 consisting of 2x Micron MT28F128J3-12 128 Mbit flash on a 32-bit
+ * data bus, for a total of 32 MB of CFI-compatible flash.
+ *
+ *
+ *                            EDB9301/02(a)7a/15a    EDB9307/12/15
+ * 0x60000000 - 0x0003FFFF    u-boot                 u-boot
+ * 0x60040000 - 0x0005FFFF    environment #1         environment #1
+ * 0x60060000 - 0x0007FFFF    environment #2         environment #1 (continued)
+ * 0x60080000 - 0x0009FFFF    unused                 environment #2
+ * 0x600A0000 - 0x000BFFFF    unused                 environment #2 (continued)
+ * 0x600C0000 - 0x00FFFFFF    unused                 unused
+ * 0x61000000 - 0x01FFFFFF    not present            unused
+ */
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+
+
+#define CONFIG_SYS_FLASH_PROTECTION
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_MAX_FLASH_BANKS	1
+#define CONFIG_SYS_MAX_FLASH_SECT	(256+8)
+
+#define CONFIG_SYS_TEXT_BASE		0x60000000
+#define PHYS_FLASH_1			CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_TEXT_BASE
+
+#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)
+
+#define CONFIG_ENV_OVERWRITE		/* Vendor params unprotected */
+#define CONFIG_ENV_IS_IN_FLASH
+
+#define CONFIG_ENV_ADDR			0x60040000
+#define CONFIG_ENV_ADDR_REDUND		(CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
+
+#define CONFIG_ENV_SIZE			CONFIG_ENV_SECT_SIZE
+#define CONFIG_ENV_SIZE_REDUND		CONFIG_ENV_SIZE
+
+/* Define to enable MMC on SPI support */
+/* #define CONFIG_EP93XX_SPI_MMC */
+
+#ifdef CONFIG_EP93XX_SPI_MMC
+#define CONFIG_EP93XX_SPI
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_MMC_SPI
+#define CONFIG_CMD_MMC
+#define CONFIG_MMC_SPI_NPOWER_EGPIO	9
+#endif
+
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_OHCI_NEW
+#define CONFIG_USB_OHCI_EP93XX
+#define CONFIG_SYS_USB_OHCI_CPU_INIT
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	3
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME		"ep93xx-ohci"
+#define CONFIG_SYS_USB_OHCI_REGS_BASE		0x80020000
+
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_EXT4
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_USB
+
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_CMD_BOOTZ
+
+/* Define to disable flash configuration*/
+/* #define CONFIG_EP93XX_NO_FLASH_CFG */
+
+/* Define this for indusrial rated chips */
+/* #define CONFIG_EDB93XX_INDUSTRIAL */
+
+#endif /* !defined (__CONFIG_H) */
diff --git a/include/configs/ep8248.h b/include/configs/ep8248.h
deleted file mode 100644
index f1af96d..0000000
--- a/include/configs/ep8248.h
+++ /dev/null
@@ -1,253 +0,0 @@
-/*
- * Copyright (C) 2004 Arabella Software Ltd.
- * Yuli Barcohen <yuli@arabellasw.com>
- *
- * U-Boot configuration for Embedded Planet EP8248 boards.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_MPC8248
-#define CPU_ID_STR		"MPC8248"
-
-#define CONFIG_EP8248			/* Embedded Planet EP8248 board */
-
-#define	CONFIG_SYS_TEXT_BASE	0xFFF00000
-
-#define CONFIG_BOARD_EARLY_INIT_F 1	/* Call board_early_init_f	*/
-
-/* Allow serial number (serial#) and MAC address (ethaddr) to be overwritten */
-#define CONFIG_ENV_OVERWRITE
-
-/*
- * Select serial console configuration
- *
- * If either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
- * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
- * for SCC).
- */
-#define	CONFIG_CONS_ON_SMC		/* Console is on SMC         */
-#undef  CONFIG_CONS_ON_SCC		/* It's not on SCC           */
-#undef	CONFIG_CONS_NONE		/* It's not on external UART */
-#define CONFIG_CONS_INDEX	1	/* SMC1 is used for console  */
-
-#define CONFIG_SYS_BCSR		0xFA000000
-
-/* Pass open firmware flat device tree */
-#define CONFIG_OF_LIBFDT	1
-#define CONFIG_OF_BOARD_SETUP	1
-
-#define OF_TBCLK        (bd->bi_busfreq / 4)
-#define OF_STDOUT_PATH  "/soc/cpm/serial <at> 11a80"
-
-/* Select ethernet configuration */
-#undef	CONFIG_ETHER_ON_SCC		/* Ethernet is not on SCC */
-#define CONFIG_ETHER_ON_FCC		/* Ethernet is on FCC     */
-#undef	CONFIG_ETHER_NONE		/* No external Ethernet   */
-
-#define CONFIG_SYS_CPMFCR_RAMTYPE	0
-#define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
-
-#define CONFIG_HAS_ETH0
-#define CONFIG_ETHER_ON_FCC1		1
-/* - Rx clock is CLK10
- * - Tx clock is CLK11
- * - BDs/buffers on 60x bus
- * - Full duplex
- */
-#define CONFIG_SYS_CMXFCR_MASK1	(CMXFCR_FC1 | CMXFCR_RF1CS_MSK | CMXFCR_TF1CS_MSK)
-#define CONFIG_SYS_CMXFCR_VALUE1	(CMXFCR_RF1CS_CLK10 | CMXFCR_TF1CS_CLK11)
-
-#define CONFIG_HAS_ETH1
-#define CONFIG_ETHER_ON_FCC2		1
-/* - Rx clock is CLK13
- * - Tx clock is CLK14
- * - BDs/buffers on 60x bus
- * - Full duplex
- */
-#define CONFIG_SYS_CMXFCR_MASK2	(CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
-#define CONFIG_SYS_CMXFCR_VALUE2	(CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
-
-#define CONFIG_MII			/* MII PHY management        */
-#define CONFIG_BITBANGMII		/* Bit-banged MDIO interface */
-/*
- * GPIO pins used for bit-banged MII communications
- */
-#define MDIO_PORT		0	/* Not used - implemented in BCSR */
-
-#define MDIO_ACTIVE		(*(vu_char *)(CONFIG_SYS_BCSR + 8) &= 0xFB)
-#define MDIO_TRISTATE		(*(vu_char *)(CONFIG_SYS_BCSR + 8) |= 0x04)
-#define MDIO_READ		(*(vu_char *)(CONFIG_SYS_BCSR + 8) & 1)
-
-#define MDIO(bit)		if(bit) *(vu_char *)(CONFIG_SYS_BCSR + 8) |= 0x01; \
-				else	*(vu_char *)(CONFIG_SYS_BCSR + 8) &= 0xFE
-
-#define MDC(bit)		if(bit) *(vu_char *)(CONFIG_SYS_BCSR + 8) |= 0x02; \
-				else	*(vu_char *)(CONFIG_SYS_BCSR + 8) &= 0xFD
-
-#define MIIDELAY		udelay(1)
-
-#ifndef CONFIG_8260_CLKIN
-#define CONFIG_8260_CLKIN	66000000	/* in Hz */
-#endif
-
-#define CONFIG_BAUDRATE		38400
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_ECHO
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_IMMAP
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-
-
-#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds */
-#define CONFIG_BOOTCOMMAND	"bootm FF860000"	/* autoboot command */
-#define CONFIG_BOOTARGS		"root=/dev/mtdblock1 rw mtdparts=phys:7M(root),-(root)ro"
-
-#if defined(CONFIG_CMD_KGDB)
-#undef	CONFIG_KGDB_ON_SMC		/* define if kgdb on SMC */
-#define CONFIG_KGDB_ON_SCC		/* define if kgdb on SCC */
-#undef	CONFIG_KGDB_NONE		/* define if kgdb on something else */
-#define CONFIG_KGDB_INDEX	1	/* which serial channel for kgdb */
-#define CONFIG_KGDB_BAUDRATE	115200	/* speed to run kgdb serial port at */
-#endif
-
-#define CONFIG_BZIP2	/* include support for bzip2 compressed images */
-#undef	CONFIG_WATCHDOG			/* disable platform specific watchdog */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_LONGHELP			/* undef to save memory	    */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size  */
-#else
-#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size  */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size  */
-#define CONFIG_SYS_MAXARGS		16		/* max number of command args */
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size  */
-
-#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on */
-#define CONFIG_SYS_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
-
-#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
-
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
-
-#define CONFIG_SYS_FLASH_BASE		0xFF800000
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of flash banks	*/
-#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max num of sects on one chip */
-
-#define	CONFIG_SYS_DIRECT_FLASH_TFTP
-
-#if defined(CONFIG_CMD_JFFS2)
-#define CONFIG_SYS_JFFS2_FIRST_BANK	0
-#define CONFIG_SYS_JFFS2_NUM_BANKS	CONFIG_SYS_MAX_FLASH_BANKS
-#define CONFIG_SYS_JFFS2_FIRST_SECTOR  0
-#define CONFIG_SYS_JFFS2_LAST_SECTOR   62
-#define CONFIG_SYS_JFFS2_SORT_FRAGMENTS
-#define CONFIG_SYS_JFFS_CUSTOM_PART
-#endif
-
-#if defined(CONFIG_CMD_I2C)
-#define CONFIG_HARD_I2C		1	/* To enable I2C support	*/
-#define CONFIG_SYS_I2C_SPEED		100000	/* I2C speed			*/
-#define CONFIG_SYS_I2C_SLAVE		0x7F	/* I2C slave address		*/
-#endif
-
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-#define CONFIG_SYS_RAMBOOT
-#endif
-
-#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256KB for Monitor */
-
-#define CONFIG_ENV_IS_IN_FLASH
-
-#ifdef CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_SECT_SIZE	0x20000
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
-#endif /* CONFIG_ENV_IS_IN_FLASH */
-
-#define CONFIG_SYS_DEFAULT_IMMR	0x00010000
-
-#define CONFIG_SYS_IMMR		0xF0000000
-
-#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE	0x2000	/* Size of used area in DPRAM	*/
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-/* Hard reset configuration word */
-#define CONFIG_SYS_HRCW_MASTER		0x0C40025A /* Not used - provided by FPGA */
-/* No slaves */
-#define CONFIG_SYS_HRCW_SLAVE1		0
-#define CONFIG_SYS_HRCW_SLAVE2		0
-#define CONFIG_SYS_HRCW_SLAVE3		0
-#define CONFIG_SYS_HRCW_SLAVE4		0
-#define CONFIG_SYS_HRCW_SLAVE5		0
-#define CONFIG_SYS_HRCW_SLAVE6		0
-#define CONFIG_SYS_HRCW_SLAVE7		0
-
-#define CONFIG_SYS_MALLOC_LEN		(4096 << 10)	/* Reserve 4 MB for malloc()	*/
-#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
-
-#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC8260 CPUs */
-#if defined(CONFIG_CMD_KGDB)
-#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
-#endif
-
-#define CONFIG_SYS_HID0_INIT		0
-#define CONFIG_SYS_HID0_FINAL		(HID0_ICE | HID0_IFEM | HID0_ABE)
-
-#define CONFIG_SYS_HID2		0
-
-#define CONFIG_SYS_SIUMCR		0x01240200
-#define CONFIG_SYS_SYPCR		0xFFFF0683
-#define CONFIG_SYS_BCR			0x00000000
-#define CONFIG_SYS_SCCR		SCCR_DFBRG01
-
-#define CONFIG_SYS_RMR			RMR_CSRE
-#define CONFIG_SYS_TMCNTSC		(TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
-#define CONFIG_SYS_PISCR		(PISCR_PS|PISCR_PTF|PISCR_PTE)
-#define CONFIG_SYS_RCCR		0
-
-#define CONFIG_SYS_MPTPR		0x1300
-#define CONFIG_SYS_PSDMR		0x82672522
-#define CONFIG_SYS_PSRT		0x4B
-
-#define CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_SDRAM_BR		(CONFIG_SYS_SDRAM_BASE | 0x00001841)
-#define CONFIG_SYS_SDRAM_OR		0xFF0030C0
-
-#define CONFIG_SYS_BR0_PRELIM		(CONFIG_SYS_FLASH_BASE | 0x00001801)
-#define CONFIG_SYS_OR0_PRELIM		0xFF8008C2
-#define CONFIG_SYS_BR2_PRELIM		(CONFIG_SYS_BCSR | 0x00000801)
-#define CONFIG_SYS_OR2_PRELIM		0xFFF00864
-
-#define CONFIG_SYS_RESET_ADDRESS	0xC0000000
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h
index 480d867..4c69af6 100644
--- a/include/configs/ethernut5.h
+++ b/include/configs/ethernut5.h
@@ -12,6 +12,8 @@
 
 #include <asm/hardware.h>
 
+#define CONFIG_SYS_GENERIC_BOARD
+
 /* The first stage boot loader expects u-boot running at this address. */
 #define CONFIG_SYS_TEXT_BASE	0x27000000	/* 16MB available */
 
@@ -23,8 +25,6 @@
 #define CONFIG_MACH_TYPE MACH_TYPE_ETHERNUT5
 
 /* CPU information */
-#define CONFIG_ARM926EJS
-#define CONFIG_AT91FAMILY
 #define CONFIG_DISPLAY_CPUINFO		/* Display at console. */
 #define CONFIG_ARCH_CPU_INIT
 
diff --git a/include/configs/exynos4-dt.h b/include/configs/exynos4-dt.h
index cbd2d20..44e6ab4 100644
--- a/include/configs/exynos4-dt.h
+++ b/include/configs/exynos4-dt.h
@@ -20,6 +20,7 @@
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
 #define CONFIG_BOARD_COMMON
+#define CONFIG_SYS_GENERIC_BOARD
 
 /* Enable fdt support */
 #define CONFIG_OF_CONTROL
@@ -44,6 +45,9 @@
 #define CONFIG_S5P_SDHCI
 #define CONFIG_SDHCI
 #define CONFIG_MMC_SDMA
+#define CONFIG_DWMMC
+#define CONFIG_EXYNOS_DWMMC
+#define CONFIG_BOUNCE_BUFFER
 #define CONFIG_MMC_DEFAULT_DEV	0
 
 /* PWM */
diff --git a/include/configs/exynos5-dt.h b/include/configs/exynos5-dt.h
index 5a9b1b4..e36a031 100644
--- a/include/configs/exynos5-dt.h
+++ b/include/configs/exynos5-dt.h
@@ -144,8 +144,6 @@
 
 /* specific .lds file */
 #define CONFIG_SPL_LDSCRIPT	"board/samsung/common/exynos-uboot-spl.lds"
-#define CONFIG_SPL_MAX_FOOTPRINT	(14 * 1024)
-
 
 /* Miscellaneous configurable options */
 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
@@ -163,8 +161,6 @@
 
 #define CONFIG_RD_LVL
 
-#define CONFIG_NR_DRAM_BANKS	8
-#define SDRAM_BANK_SIZE		(256UL << 20UL)	/* 256 MB */
 #define PHYS_SDRAM_1		CONFIG_SYS_SDRAM_BASE
 #define PHYS_SDRAM_1_SIZE	SDRAM_BANK_SIZE
 #define PHYS_SDRAM_2		(CONFIG_SYS_SDRAM_BASE + SDRAM_BANK_SIZE)
@@ -207,7 +203,10 @@
 
 #define CONFIG_BL1_OFFSET	(CONFIG_RES_BLOCK_SIZE + CONFIG_SEC_FW_SIZE)
 #define CONFIG_BL2_OFFSET	(CONFIG_BL1_OFFSET + CONFIG_BL1_SIZE)
-#define CONFIG_ENV_OFFSET	(CONFIG_BL2_OFFSET + CONFIG_BL2_SIZE)
+
+/* Store environment at the end of a 4 MB SPI flash */
+#define FLASH_SIZE		(0x4 << 20)
+#define CONFIG_ENV_OFFSET	(FLASH_SIZE - CONFIG_BL2_SIZE)
 
 /* U-boot copy size from boot Media to DRAM.*/
 #define BL2_START_OFFSET	(CONFIG_BL2_OFFSET/512)
@@ -259,6 +258,7 @@
 /* PMIC */
 #define CONFIG_POWER
 #define CONFIG_POWER_I2C
+#define CONFIG_POWER_TPS65090
 
 /* Ethernet Controllor Driver */
 #ifdef CONFIG_CMD_NET
@@ -290,4 +290,10 @@
 
 #define CONFIG_CMD_GPIO
 
+/* USB boot mode */
+#define CONFIG_USB_BOOTING
+#define EXYNOS_COPY_USB_FNPTR_ADDR	0x02020070
+#define EXYNOS_USB_SECONDARY_BOOT	0xfeed0002
+#define EXYNOS_IRAM_SECONDARY_BASE	0x02020018
+
 #endif	/* __CONFIG_H */
diff --git a/include/configs/exynos5250-dt.h b/include/configs/exynos5250-dt.h
index b7ff472..74e72a5 100644
--- a/include/configs/exynos5250-dt.h
+++ b/include/configs/exynos5250-dt.h
@@ -20,6 +20,8 @@
 #define MACH_TYPE_SMDK5250		3774
 #define CONFIG_MACH_TYPE		MACH_TYPE_SMDK5250
 
+#define CONFIG_SPL_MAX_FOOTPRINT	(14 * 1024)
+
 /* USB */
 #define CONFIG_CMD_USB
 #define CONFIG_USB_XHCI
@@ -27,12 +29,6 @@
 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS	2
 #define CONFIG_USB_STORAGE
 
-/* USB boot mode */
-#define CONFIG_USB_BOOTING
-#define EXYNOS_COPY_USB_FNPTR_ADDR	0x02020070
-#define EXYNOS_USB_SECONDARY_BOOT	0xfeed0002
-#define EXYNOS_IRAM_SECONDARY_BASE	0x02020018
-
 #define CONFIG_SPL_TEXT_BASE	0x02023400
 
 #define CONFIG_BOOTCOMMAND	"mmc read 40007000 451 2000; bootm 40007000"
@@ -45,7 +41,7 @@
 #define CONFIG_SYS_INIT_SP_ADDR	CONFIG_IRAM_STACK
 
 /* PMIC */
-#define CONFIG_PMIC_MAX77686
+#define CONFIG_POWER_MAX77686
 
 /* Sound */
 #define CONFIG_CMD_SOUND
@@ -69,4 +65,9 @@
 #define LCD_YRES			1600
 #define LCD_BPP			LCD_COLOR16
 #endif
+
+/* DRAM Memory Banks */
+#define CONFIG_NR_DRAM_BANKS	8
+#define SDRAM_BANK_SIZE		(256UL << 20UL)	/* 256 MB */
+
 #endif  /* __CONFIG_5250_H */
diff --git a/include/configs/exynos5420.h b/include/configs/exynos5420.h
new file mode 100644
index 0000000..d2a9556
--- /dev/null
+++ b/include/configs/exynos5420.h
@@ -0,0 +1,52 @@
+/*
+ * Copyright (C) 2013 Samsung Electronics
+ *
+ * Configuration settings for the SAMSUNG EXYNOS5420 SoC
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __CONFIG_EXYNOS5420_H
+#define __CONFIG_EXYNOS5420_H
+
+#define CONFIG_EXYNOS5420		/* which is in a Exynos5 Family */
+
+#define MACH_TYPE_SMDK5420	8002
+#define CONFIG_MACH_TYPE	MACH_TYPE_SMDK5420
+
+#define CONFIG_VAR_SIZE_SPL
+
+#define CONFIG_SYS_SDRAM_BASE		0x20000000
+#define CONFIG_SYS_TEXT_BASE		0x23E00000
+#ifdef CONFIG_VAR_SIZE_SPL
+#define CONFIG_SPL_TEXT_BASE		0x02024410
+#else
+#define CONFIG_SPL_TEXT_BASE		0x02024400
+#endif
+#define CONFIG_IRAM_TOP			0x02074000
+
+#define CONFIG_SPL_MAX_FOOTPRINT	(30 * 1024)
+
+#define CONFIG_DEVICE_TREE_LIST "exynos5420-peach-pit exynos5420-smdk5420"
+
+#define CONFIG_MAX_I2C_NUM	11
+
+/* Enable FIT support and comparison */
+#define CONFIG_FIT
+#define CONFIG_FIT_BEST_MATCH
+
+#define CONFIG_BOARD_REV_GPIO_COUNT	2
+
+#define CONFIG_BOOTCOMMAND	"mmc read 20007000 451 2000; bootm 20007000"
+
+/*
+ * Put the initial stack pointer 1KB below this to allow room for the
+ * SPL marker. This value is arbitrary, but gd_t is placed starting here.
+ */
+#define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_IRAM_TOP - 0x800)
+
+/* DRAM Memory Banks */
+#define CONFIG_NR_DRAM_BANKS	7
+#define SDRAM_BANK_SIZE		(512UL << 20UL)	/* 512 MB */
+
+#endif	/* __CONFIG_EXYNOS5420_H */
diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h
index fb93913..8197a72 100644
--- a/include/configs/gw_ventana.h
+++ b/include/configs/gw_ventana.h
@@ -203,7 +203,6 @@
 #define CONFIG_USB_ETH_CDC
 #define CONFIG_NETCONSOLE
 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
-#define CONFIG_USB_HUB_MIN_POWER_ON_DELAY 1200
 
 /* Framebuffer and LCD */
 #define CONFIG_VIDEO
diff --git a/include/configs/h2200.h b/include/configs/h2200.h
index d026484..5d0b85e 100644
--- a/include/configs/h2200.h
+++ b/include/configs/h2200.h
@@ -12,6 +12,7 @@
 #define MACH_TYPE_H2200			341
 #define CONFIG_MACH_TYPE		MACH_TYPE_H2200
 
+#define CONFIG_SYS_GENERIC_BOARD
 #define CONFIG_CPU_PXA25X		1
 #define CONFIG_BOARD_H2200
 
diff --git a/include/configs/ids8313.h b/include/configs/ids8313.h
index c1b3b63..3e55247 100644
--- a/include/configs/ids8313.h
+++ b/include/configs/ids8313.h
@@ -19,6 +19,8 @@
 #define CONFIG_MPC8313
 #define CONFIG_IDS8313
 
+#define CONFIG_SYS_GENERIC_BOARD
+
 #define CONFIG_FSL_ELBC
 
 #define CONFIG_MISC_INIT_R
@@ -576,11 +578,11 @@
 
 #define CONFIG_FIT
 #define CONFIG_FIT_SIGNATURE
+#define CONFIG_IMAGE_FORMAT_LEGACY
 #define CONFIG_CMD_FDT
 #define CONFIG_CMD_HASH
 #define CONFIG_RSA
 #define CONFIG_SHA1
 #define CONFIG_SHA256
-#define CONFIG_OF_CONTROL
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/integrator-common.h b/include/configs/integrator-common.h
index 267a92b..eac517a 100644
--- a/include/configs/integrator-common.h
+++ b/include/configs/integrator-common.h
@@ -26,6 +26,7 @@
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_OF_LIBFDT		/* enable passing a Device Tree */
 #define CONFIG_MISC_INIT_R		/* call misc_init_r during start up */
+#define CONFIG_SYS_GENERIC_BOARD
 
 /*
  * There are various dependencies on the core module (CM) fitted
diff --git a/include/configs/io.h b/include/configs/io.h
index 9da6cc6..8e32c25 100644
--- a/include/configs/io.h
+++ b/include/configs/io.h
@@ -40,6 +40,7 @@
 /* new uImage format support */
 #define CONFIG_FIT
 #define CONFIG_FIT_VERBOSE	/* enable fit_format_{error,warning}() */
+#define CONFIG_FIT_DISABLE_SHA256
 
 #define CONFIG_ENV_IS_IN_FLASH	/* use FLASH for environment vars */
 
@@ -64,9 +65,14 @@
 /*
  * Commands additional to the ones defined in amcc-common.h
  */
-#define CONFIG_CMD_CACHE
 #define CONFIG_CMD_DTT
+#undef CONFIG_CMD_DHCP
+#undef CONFIG_CMD_DIAG
 #undef CONFIG_CMD_EEPROM
+#undef CONFIG_CMD_ELF
+#undef CONFIG_CMD_I2C
+#undef CONFIG_CMD_IRQ
+#undef CONFIG_CMD_NFS
 
 /*
  * SDRAM configuration (please see cpu/ppc/sdram.[ch])
diff --git a/include/configs/iocon.h b/include/configs/iocon.h
index 79c4736..ae05bcb 100644
--- a/include/configs/iocon.h
+++ b/include/configs/iocon.h
@@ -17,7 +17,7 @@
  * Include common defines/options for all AMCC eval boards
  */
 #define CONFIG_HOSTNAME		iocon
-#define CONFIG_IDENT_STRING	" iocon 0.05"
+#define CONFIG_IDENT_STRING	" iocon 0.06"
 #include "amcc-common.h"
 
 #define CONFIG_BOARD_EARLY_INIT_F
@@ -39,6 +39,7 @@
 /* new uImage format support */
 #define CONFIG_FIT
 #define CONFIG_FIT_VERBOSE	/* enable fit_format_{error,warning}() */
+#define CONFIG_FIT_DISABLE_SHA256
 
 #define CONFIG_ENV_IS_IN_FLASH	/* use FLASH for environment vars */
 
@@ -62,9 +63,12 @@
  * Commands additional to the ones defined in amcc-common.h
  */
 #define CONFIG_CMD_CACHE
-#define CONFIG_CMD_FPGA
-#define CONFIG_CMD_FPGA_LOADMK
+#define CONFIG_CMD_FPGAD
 #undef CONFIG_CMD_EEPROM
+#undef CONFIG_CMD_ELF
+#undef CONFIG_CMD_I2C
+#undef CONFIG_CMD_IRQ
+#undef CONFIG_CMD_NFS
 
 /*
  * SDRAM configuration (please see cpu/ppc/sdram.[ch])
@@ -100,12 +104,27 @@
 #define CONFIG_SYS_I2C_PPC4XX_CH0
 #define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
 #define CONFIG_SYS_I2C_PPC4XX_SLAVE_0		0x7F
+#define CONFIG_SYS_I2C_IHS
 
 #define CONFIG_SYS_I2C_SPEED		400000
+#define CONFIG_SYS_SPD_BUS_NUM		4
 
 #define CONFIG_PCA953X			/* NXP PCA9554 */
 #define CONFIG_PCA9698			/* NXP PCA9698 */
 
+#define CONFIG_SYS_I2C_IHS_CH0
+#define CONFIG_SYS_I2C_IHS_SPEED_0		50000
+#define CONFIG_SYS_I2C_IHS_SLAVE_0		0x7F
+#define CONFIG_SYS_I2C_IHS_CH1
+#define CONFIG_SYS_I2C_IHS_SPEED_1		50000
+#define CONFIG_SYS_I2C_IHS_SLAVE_1		0x7F
+#define CONFIG_SYS_I2C_IHS_CH2
+#define CONFIG_SYS_I2C_IHS_SPEED_2		50000
+#define CONFIG_SYS_I2C_IHS_SLAVE_2		0x7F
+#define CONFIG_SYS_I2C_IHS_CH3
+#define CONFIG_SYS_I2C_IHS_SPEED_3		50000
+#define CONFIG_SYS_I2C_IHS_SLAVE_3		0x7F
+
 /*
  * Software (bit-bang) I2C driver configuration
  */
@@ -122,7 +141,9 @@
 #define CONFIG_SYS_I2C_SOFT_SPEED_4		50000
 #define CONFIG_SYS_I2C_SOFT_SLAVE_4		0x7F
 
-#define CONFIG_SYS_CH7301_I2C			{1, 2, 3, 4}
+#define CONFIG_SYS_ICS8N3QV01_I2C		{5, 6, 7, 8}
+#define CONFIG_SYS_CH7301_I2C			{5, 6, 7, 8}
+#define CONFIG_SYS_DP501_I2C			{0, 1, 2, 3}
 
 #ifndef __ASSEMBLY__
 void fpga_gpio_set(unsigned int bus, int pin);
@@ -151,12 +172,6 @@ int fpga_gpio_get(unsigned int bus, int pin);
 #define I2C_DELAY	udelay(25)	/* 1/4 I2C clock duration */
 
 /*
- * OSD hardware
- */
-#define CONFIG_SYS_MPC92469AC
-#define CONFIG_SYS_CH7301
-
-/*
  * FLASH organization
  */
 #define CONFIG_SYS_FLASH_CFI		/* The flash is CFI compatible	*/
@@ -284,8 +299,9 @@ int fpga_gpio_get(unsigned int bus, int pin);
  * OSD Setup
  */
 #define CONFIG_SYS_MPC92469AC
-#define CONFIG_SYS_CH7301
 #define CONFIG_SYS_OSD_SCREENS		1
+#define CONFIG_SYS_DP501_DIFFERENTIAL
+#define CONFIG_SYS_DP501_VCAPCTRL0	0x01 /* DDR mode 0, DE for H/VSYNC */
 
 #define CONFIG_BITBANGMII		/* bit-bang MII PHY management */
 #define CONFIG_BITBANGMII_MULTI
diff --git a/include/configs/jetson-tk1.h b/include/configs/jetson-tk1.h
index 6255750..0b9e5b6 100644
--- a/include/configs/jetson-tk1.h
+++ b/include/configs/jetson-tk1.h
@@ -63,6 +63,7 @@
 /* USB Host support */
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_TEGRA
+#define CONFIG_USB_MAX_CONTROLLER_COUNT	2
 #define CONFIG_USB_STORAGE
 #define CONFIG_CMD_USB
 
@@ -74,6 +75,7 @@
 #define CONFIG_CMD_NET
 #define CONFIG_CMD_DHCP
 
+#include "tegra-common-ums.h"
 #include "tegra-common-post.h"
 
 #endif /* __CONFIG_H */
diff --git a/include/configs/k2hk_evm.h b/include/configs/k2hk_evm.h
index dde7329..858329f 100644
--- a/include/configs/k2hk_evm.h
+++ b/include/configs/k2hk_evm.h
@@ -71,7 +71,8 @@
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_MEM32
 #define CONFIG_SYS_NS16550_REG_SIZE     -4
-#define CONFIG_SYS_NS16550_COM1         K2HK_UART0_BASE
+#define CONFIG_SYS_NS16550_COM1         KS2_UART0_BASE
+#define CONFIG_SYS_NS16550_COM2         KS2_UART1_BASE
 #define CONFIG_SYS_NS16550_CLK          clk_get_rate(K2HK_CLK1_6)
 #define CONFIG_CONS_INDEX               1
 #define CONFIG_BAUDRATE                 115200
@@ -128,12 +129,19 @@
 #define CONFIG_SYS_SGMII_LINERATE_MHZ          1250
 #define CONFIG_SYS_SGMII_RATESCALE             2
 
+/* AEMIF */
+#define CONFIG_TI_AEMIF
+#define CONFIG_AEMIF_CNTRL_BASE		       KS2_AEMIF_CNTRL_BASE
+
 /* NAND Configuration */
 #define CONFIG_NAND_DAVINCI
+#define CONFIG_CMD_NAND_ECCLAYOUT
 #define CONFIG_SYS_NAND_CS                     2
 #define CONFIG_SYS_NAND_USE_FLASH_BBT
 #define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
 #define CONFIG_SYS_NAND_PAGE_2K
+#define CONFIG_SYS_NAND_MASK_CLE		0x4000
+#define CONFIG_SYS_NAND_MASK_ALE		0x2000
 
 #define CONFIG_SYS_NAND_LARGEPAGE
 #define CONFIG_SYS_NAND_BASE_LIST       { 0x30000000, }
diff --git a/include/configs/kvme080.h b/include/configs/kvme080.h
deleted file mode 100644
index c352a1c..0000000
--- a/include/configs/kvme080.h
+++ /dev/null
@@ -1,251 +0,0 @@
-/*
- * (C) Copyright 2005
- * Sangmoon Kim, dogoil@etinsys.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_MPC8245		1
-#define CONFIG_KVME080		1
-
-#define	CONFIG_SYS_TEXT_BASE	0xFFF00000
-
-#define CONFIG_CONS_INDEX	1
-
-#define CONFIG_BAUDRATE		115200
-
-#define CONFIG_BOOTDELAY	5
-
-#define CONFIG_IPADDR		192.168.0.2
-#define CONFIG_NETMASK		255.255.255.0
-#define CONFIG_SERVERIP		192.168.0.1
-
-#define CONFIG_BOOTARGS \
-	"console=ttyS0,115200 " \
-	"root=/dev/nfs rw nfsroot=192.168.0.1:/opt/eldk/ppc_82xx " \
-	"ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:" \
-	"kvme080:eth0:none " \
-	"mtdparts=phys_mapped_flash:12m(root),-(kernel)"
-
-#define CONFIG_BOOTCOMMAND \
-	"tftp 800000 kvme080/uImage; " \
-	"bootm 800000"
-
-#define CONFIG_LOADADDR		800000
-
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_EARLY_INIT_R
-#define CONFIG_MISC_INIT_R
-
-#define CONFIG_LOADS_ECHO	1
-#undef	CONFIG_SYS_LOADS_BAUD_CHANGE
-
-#undef	CONFIG_WATCHDOG
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-#define CONFIG_MAC_PARTITION
-#define CONFIG_DOS_PARTITION
-
-#define CONFIG_RTC_DS164x
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SDRAM
-#define CONFIG_CMD_SNTP
-
-
-#define CONFIG_NETCONSOLE
-
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_CBSIZE		256
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-#define CONFIG_SYS_MAXARGS		16
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
-
-#define CONFIG_SYS_MEMTEST_START	0x00400000
-#define CONFIG_SYS_MEMTEST_END		0x07C00000
-
-#define CONFIG_SYS_LOAD_ADDR		0x00100000
-
-#define CONFIG_SYS_INIT_RAM_ADDR	0x40000000
-#define CONFIG_SYS_INIT_RAM_SIZE	0x1000
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-
-#define CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_FLASH_BASE		0x7C000000
-#define CONFIG_SYS_EUMB_ADDR		0xFC000000
-#define CONFIG_SYS_NVRAM_BASE_ADDR	0xFF000000
-#define CONFIG_SYS_NS16550_COM1	0xFF080000
-#define CONFIG_SYS_NS16550_COM2	0xFF080010
-#define CONFIG_SYS_NS16550_COM3	0xFF080020
-#define CONFIG_SYS_NS16550_COM4	0xFF080030
-#define CONFIG_SYS_RESET_ADDRESS	0xFFF00100
-
-#define CONFIG_SYS_MAX_RAM_SIZE	0x20000000
-#define CONFIG_SYS_FLASH_SIZE		(16 * 1024 * 1024)
-#define CONFIG_SYS_NVRAM_SIZE		0x7FFF8
-
-#define CONFIG_VERY_BIG_RAM
-
-#define CONFIG_SYS_MONITOR_LEN		0x00040000
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_MALLOC_LEN		(512 << 10)
-
-#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)
-
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
-#define CONFIG_SYS_FLASH_PROTECTION
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-#define CONFIG_SYS_FLASH_PROTECT_CLEAR
-
-#define CONFIG_SYS_MAX_FLASH_BANKS	1
-#define CONFIG_SYS_MAX_FLASH_SECT	256
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	120000
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500
-
-#define CONFIG_SYS_JFFS2_FIRST_BANK	0
-#define CONFIG_SYS_JFFS2_NUM_BANKS	1
-
-#define CONFIG_ENV_IS_IN_NVRAM	1
-#define CONFIG_ENV_OVERWRITE	1
-#define CONFIG_SYS_NVRAM_ACCESS_ROUTINE
-#define CONFIG_ENV_ADDR		CONFIG_SYS_NVRAM_BASE_ADDR
-#define CONFIG_ENV_SIZE		0x400
-#define CONFIG_ENV_OFFSET		0
-
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	1
-#define CONFIG_SYS_NS16550_CLK		14745600
-
-#define CONFIG_PCI
-#define CONFIG_PCI_INDIRECT_BRIDGE
-#define CONFIG_PCI_PNP
-
-#define CONFIG_EEPRO100
-#define CONFIG_EEPRO100_SROM_WRITE
-
-#define CONFIG_SYS_RX_ETH_BUFFER	8
-
-#define CONFIG_HARD_I2C		1
-#define CONFIG_SYS_I2C_SPEED		400000
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-
-#define CONFIG_SYS_I2C_EEPROM_ADDR		0x57
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10
-
-#define CONFIG_SYS_CLK_FREQ	33333333
-
-#define CONFIG_SYS_CACHELINE_SIZE	32
-#if defined(CONFIG_CMD_KGDB)
-#  define CONFIG_SYS_CACHELINE_SHIFT	5
-#endif
-
-#define CONFIG_SYS_DLL_EXTEND		0x00
-#define CONFIG_SYS_PCI_HOLD_DEL	0x20
-
-#define CONFIG_SYS_ROMNAL		15
-#define CONFIG_SYS_ROMFAL		31
-
-#define CONFIG_SYS_REFINT		430
-
-#define CONFIG_SYS_DBUS_SIZE2		1
-
-#define CONFIG_SYS_BSTOPRE		121
-#define CONFIG_SYS_REFREC		8
-#define CONFIG_SYS_RDLAT		4
-#define CONFIG_SYS_PRETOACT		3
-#define CONFIG_SYS_ACTTOPRE		5
-#define CONFIG_SYS_ACTORW		3
-#define CONFIG_SYS_SDMODE_CAS_LAT	3
-#define CONFIG_SYS_SDMODE_WRAP		0
-
-#define CONFIG_SYS_REGISTERD_TYPE_BUFFER	1
-#define CONFIG_SYS_EXTROM			1
-#define CONFIG_SYS_REGDIMM			0
-
-#define CONFIG_SYS_BANK0_START		0x00000000
-#define CONFIG_SYS_BANK0_END		(0x4000000 - 1)
-#define CONFIG_SYS_BANK0_ENABLE	1
-#define CONFIG_SYS_BANK1_START		0x04000000
-#define CONFIG_SYS_BANK1_END		(0x8000000 - 1)
-#define CONFIG_SYS_BANK1_ENABLE	1
-#define CONFIG_SYS_BANK2_START		0x3ff00000
-#define CONFIG_SYS_BANK2_END		0x3fffffff
-#define CONFIG_SYS_BANK2_ENABLE	0
-#define CONFIG_SYS_BANK3_START		0x3ff00000
-#define CONFIG_SYS_BANK3_END		0x3fffffff
-#define CONFIG_SYS_BANK3_ENABLE	0
-#define CONFIG_SYS_BANK4_START		0x00000000
-#define CONFIG_SYS_BANK4_END		0x00000000
-#define CONFIG_SYS_BANK4_ENABLE	0
-#define CONFIG_SYS_BANK5_START		0x00000000
-#define CONFIG_SYS_BANK5_END		0x00000000
-#define CONFIG_SYS_BANK5_ENABLE	0
-#define CONFIG_SYS_BANK6_START		0x00000000
-#define CONFIG_SYS_BANK6_END		0x00000000
-#define CONFIG_SYS_BANK6_ENABLE	0
-#define CONFIG_SYS_BANK7_START		0x00000000
-#define CONFIG_SYS_BANK7_END		0x00000000
-#define CONFIG_SYS_BANK7_ENABLE	0
-
-#define CONFIG_SYS_BANK_ENABLE		0x03
-
-#define CONFIG_SYS_ODCR		0x75
-#define CONFIG_SYS_PGMAX		0x32
-
-#define CONFIG_SYS_IBAT0L	(CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT0U	(CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_IBAT1L	(CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT1U	(CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_IBAT2L	(0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT2U	(0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_IBAT3L	(0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT3U	(0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_DBAT0L	CONFIG_SYS_IBAT0L
-#define CONFIG_SYS_DBAT0U	CONFIG_SYS_IBAT0U
-#define CONFIG_SYS_DBAT1L	CONFIG_SYS_IBAT1L
-#define CONFIG_SYS_DBAT1U	CONFIG_SYS_IBAT1U
-#define CONFIG_SYS_DBAT2L	CONFIG_SYS_IBAT2L
-#define CONFIG_SYS_DBAT2U	CONFIG_SYS_IBAT2U
-#define CONFIG_SYS_DBAT3L	CONFIG_SYS_IBAT3L
-#define CONFIG_SYS_DBAT3U	CONFIG_SYS_IBAT3U
-
-#endif	/* __CONFIG_H */
diff --git a/include/configs/ls2085a_common.h b/include/configs/ls2085a_common.h
new file mode 100644
index 0000000..2bd5a47
--- /dev/null
+++ b/include/configs/ls2085a_common.h
@@ -0,0 +1,226 @@
+/*
+ * Copyright (C) 2014 Freescale Semiconductor
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __LS2_COMMON_H
+#define __LS2_COMMON_H
+
+#define CONFIG_SYS_GENERIC_BOARD
+
+#define CONFIG_REMAKE_ELF
+#define CONFIG_FSL_LSCH3
+#define CONFIG_LS2085A
+#define CONFIG_GICV3
+
+/* Link Definitions */
+#define CONFIG_SYS_TEXT_BASE		0x30000000
+
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_SUPPORT_RAW_INITRD
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_BOARD_EARLY_INIT_F	1
+
+#define CONFIG_IDENT_STRING		" LS2085A-EMU"
+#define CONFIG_BOOTP_VCI_STRING		"U-boot.LS2085A-EMU"
+
+/* Flat Device Tree Definitions */
+#define CONFIG_OF_LIBFDT
+#define CONFIG_OF_BOARD_SETUP
+
+/* new uImage format support */
+#define CONFIG_FIT
+#define CONFIG_FIT_VERBOSE	/* enable fit_format_{error,warning}() */
+
+#define CONFIG_FSL_DDR_INTERACTIVE	/* Interactive debugging */
+#ifndef CONFIG_SYS_FSL_DDR4
+#define CONFIG_SYS_FSL_DDR3		/* Use DDR3 memory */
+#define CONFIG_SYS_DDR_RAW_TIMING
+#endif
+#define CONFIG_DIMM_SLOTS_PER_CTLR	1
+#define CONFIG_CHIP_SELECTS_PER_CTRL	4
+
+#define CONFIG_SYS_FSL_DDR_INTLV_256B	/* force 256 byte interleaving */
+
+/* SMP Definitions */
+#define CPU_RELEASE_ADDR		CONFIG_SYS_INIT_SP_ADDR
+
+#define CONFIG_SYS_DDR_SDRAM_BASE	0x80000000UL
+#define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY	0
+#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
+#define CONFIG_SYS_DDR_BLOCK2_BASE	0x8080000000ULL
+
+/* Generic Timer Definitions */
+#define COUNTER_FREQUENCY		12000000	/* 12MHz */
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128 * 1024)
+
+/* I2C */
+#define CONFIG_CMD_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_MXC_I2C1_SPEED	40000000
+#define CONFIG_SYS_MXC_I2C2_SPEED	40000000
+
+/* Serial Port */
+#define CONFIG_CONS_INDEX       2
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE     1
+#define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
+
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+/* IFC */
+#define CONFIG_FSL_IFC
+#define CONFIG_SYS_NOR0_CSPR_EXT	(0x0)
+#define CONFIG_SYS_NOR_AMASK	IFC_AMASK(128*1024*1024)
+/*
+ * During booting, CS0 needs to be at the region of 0x30000000, i.e. the IFC
+ * address 0. But this region is limited to 256MB. To accommodate bigger NOR
+ * flash and other devices, we will map CS0 to 0x580000000 after relocation.
+ * CONFIG_SYS_FLASH_BASE has the final address (core view)
+ * CONFIG_SYS_FLASH_BASE_PHYS has the final address (IFC view)
+ * CONFIG_SYS_FLASH_BASE_PHYS_EARLY has the temporary IFC address
+ * CONFIG_SYS_TEXT_BASE is linked to 0x30000000 for booting
+ */
+#define CONFIG_SYS_FLASH_BASE			0x580000000ULL
+#define CONFIG_SYS_FLASH_BASE_PHYS		0x80000000
+#define CONFIG_SYS_FLASH_BASE_PHYS_EARLY	0x00000000
+
+/*
+ * NOR Flash Timing Params
+ */
+#define CONFIG_SYS_NOR0_CSPR					\
+	(CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS)		| \
+	CSPR_PORT_SIZE_16					| \
+	CSPR_MSEL_NOR						| \
+	CSPR_V)
+#define CONFIG_SYS_NOR0_CSPR_EARLY				\
+	(CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS_EARLY)	| \
+	CSPR_PORT_SIZE_16					| \
+	CSPR_MSEL_NOR						| \
+	CSPR_V)
+#define CONFIG_SYS_NOR_CSOR	CSOR_NOR_ADM_SHIFT(12)
+#define CONFIG_SYS_NOR_FTIM0	(FTIM0_NOR_TACSE(0x1) | \
+				FTIM0_NOR_TEADC(0x1) | \
+				FTIM0_NOR_TEAHC(0x1))
+#define CONFIG_SYS_NOR_FTIM1	(FTIM1_NOR_TACO(0x1) | \
+				FTIM1_NOR_TRAD_NOR(0x1))
+#define CONFIG_SYS_NOR_FTIM2	(FTIM2_NOR_TCS(0x0) | \
+				FTIM2_NOR_TCH(0x0) | \
+				FTIM2_NOR_TWP(0x1))
+#define CONFIG_SYS_NOR_FTIM3	0x04000000
+#define CONFIG_SYS_IFC_CCR	0x01000000
+
+#define CONFIG_SYS_CSPR0_EXT		CONFIG_SYS_NOR0_CSPR_EXT
+#define CONFIG_SYS_CSPR0		CONFIG_SYS_NOR0_CSPR_EARLY
+#define CONFIG_SYS_CSPR0_FINAL		CONFIG_SYS_NOR0_CSPR
+#define CONFIG_SYS_AMASK0		CONFIG_SYS_NOR_AMASK
+#define CONFIG_SYS_CSOR0		CONFIG_SYS_NOR_CSOR
+#define CONFIG_SYS_CS0_FTIM0		CONFIG_SYS_NOR_FTIM0
+#define CONFIG_SYS_CS0_FTIM1		CONFIG_SYS_NOR_FTIM1
+#define CONFIG_SYS_CS0_FTIM2		CONFIG_SYS_NOR_FTIM2
+#define CONFIG_SYS_CS0_FTIM3		CONFIG_SYS_NOR_FTIM3
+
+/* MC firmware */
+#define CONFIG_FSL_MC_ENET
+#define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE	(512UL * 1024 * 1024)
+#define CONFIG_SYS_LS_MC_FW_IN_NOR
+#define CONFIG_SYS_LS_MC_FW_ADDR	0x580200000ULL
+/* TODO Actual FW length needs to be determined at runtime from FW header */
+#define CONFIG_SYS_LS_MC_FW_LENGTH	(4U * 1024 * 1024)
+#define CONFIG_SYS_LS_MC_DPL_IN_NOR
+#define CONFIG_SYS_LS_MC_DPL_ADDR	0x5806C0000ULL
+/* TODO Actual DPL max length needs to be confirmed with the MC FW team */
+#define CONFIG_SYS_LS_MC_DPL_LENGTH	4096
+#define CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET    0xe00000
+
+/* Carve the MC private DRAM block from the end of DRAM */
+#ifdef CONFIG_FSL_MC_ENET
+#define CONFIG_SYS_MEM_TOP_HIDE		mc_get_dram_block_size()
+#endif
+
+/* Command line configuration */
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SAVEENV
+#define CONFIG_CMD_RUN
+#define CONFIG_CMD_BOOTD
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_SOURCE
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LOAD_ADDR	(CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
+
+/* Physical Memory Map */
+/* fixme: these need to be checked against the board */
+#define CONFIG_CHIP_SELECTS_PER_CTRL	4
+#define CONFIG_SYS_CLK_FREQ	133333333
+
+
+#define CONFIG_NR_DRAM_BANKS		2
+
+#define CONFIG_SYS_HZ			1000
+
+#define CONFIG_HWCONFIG
+#define HWCONFIG_BUFFER_SIZE		128
+
+#define CONFIG_DISPLAY_CPUINFO
+
+/* Initial environment variables */
+#define CONFIG_EXTRA_ENV_SETTINGS		\
+	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
+	"loadaddr=0x80100000\0"			\
+	"kernel_addr=0x100000\0"		\
+	"ramdisk_addr=0x800000\0"		\
+	"ramdisk_size=0x2000000\0"		\
+	"fdt_high=0xffffffffffffffff\0"		\
+	"initrd_high=0xffffffffffffffff\0"	\
+	"kernel_start=0x581200000\0"		\
+	"kernel_load=0x806f0000\0"		\
+	"kernel_size=0x1000000\0"		\
+	"console=ttyAMA0,38400n8\0"
+
+#define CONFIG_BOOTARGS			"console=ttyS1,115200 root=/dev/ram0 " \
+					"earlyprintk=uart8250-8bit,0x21c0600"
+#define CONFIG_BOOTCOMMAND		"cp.b $kernel_start $kernel_load "     \
+					"$kernel_size && bootm $kernel_load"
+#define CONFIG_BOOTDELAY		1
+
+/* Store environment at top of flash */
+#define CONFIG_ENV_IS_NOWHERE		1
+#define CONFIG_ENV_SIZE			0x1000
+
+/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
+#define CONFIG_SYS_PROMPT		"> "
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
+					sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE /* Boot args buffer */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CMDLINE_EDITING		1
+#define CONFIG_SYS_MAXARGS		64	/* max command args */
+
+#ifndef __ASSEMBLY__
+unsigned long mc_get_dram_block_size(void);
+#endif
+
+#endif /* __LS2_COMMON_H */
diff --git a/include/configs/ls2085a_emu.h b/include/configs/ls2085a_emu.h
new file mode 100644
index 0000000..a5cea63
--- /dev/null
+++ b/include/configs/ls2085a_emu.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright 2014 Freescale Semiconductor
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __LS2_EMU_H
+#define __LS2_EMU_H
+
+#include "ls2085a_common.h"
+
+#define CONFIG_DDR_SPD
+#define CONFIG_SYS_FSL_DDR_EMU		/* Support emulator */
+#define SPD_EEPROM_ADDRESS1	0x51
+#define SPD_EEPROM_ADDRESS2	0x52
+#define SPD_EEPROM_ADDRESS	SPD_EEPROM_ADDRESS1
+#define CONFIG_SYS_SPD_BUS_NUM	1	/* SPD on I2C bus 1 */
+
+#endif /* __LS2_EMU_H */
diff --git a/include/configs/ls2085a_simu.h b/include/configs/ls2085a_simu.h
new file mode 100644
index 0000000..46d47b0
--- /dev/null
+++ b/include/configs/ls2085a_simu.h
@@ -0,0 +1,16 @@
+/*
+ * Copyright (C) 2014 Freescale Semiconductor
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __LS2_SIMU_H
+#define __LS2_SIMU_H
+
+#include "ls2085a_common.h"
+
+/* SMSC 91C111 ethernet configuration */
+#define CONFIG_SMC91111
+#define CONFIG_SMC91111_BASE	(0x2210000)
+
+#endif /* __LS2_SIMU_H */
diff --git a/include/configs/mx25pdk.h b/include/configs/mx25pdk.h
index aff2419..d464ad9 100644
--- a/include/configs/mx25pdk.h
+++ b/include/configs/mx25pdk.h
@@ -107,7 +107,7 @@
 #define CONFIG_POWER
 #define CONFIG_POWER_I2C
 #define CONFIG_POWER_FSL
-#define CONFIG_PMIC_FSL_MC34704
+#define CONFIG_POWER_FSL_MC34704
 #define CONFIG_SYS_FSL_PMIC_I2C_ADDR	0x54
 
 #define CONFIG_DOS_PARTITION
diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h
index 0a46f4c..ab48144 100644
--- a/include/configs/mx35pdk.h
+++ b/include/configs/mx35pdk.h
@@ -52,7 +52,7 @@
 #define CONFIG_POWER
 #define CONFIG_POWER_I2C
 #define CONFIG_POWER_FSL
-#define CONFIG_PMIC_FSL_MC13892
+#define CONFIG_POWER_FSL_MC13892
 #define CONFIG_SYS_FSL_PMIC_I2C_ADDR	0x08
 #define CONFIG_RTC_MC13XXX
 
diff --git a/include/configs/mx53evk.h b/include/configs/mx53evk.h
index 5bbae8c..fb2072d 100644
--- a/include/configs/mx53evk.h
+++ b/include/configs/mx53evk.h
@@ -47,7 +47,7 @@
 #define CONFIG_POWER_I2C
 #define CONFIG_POWER_FSL
 #define CONFIG_SYS_FSL_PMIC_I2C_ADDR    8
-#define CONFIG_PMIC_FSL_MC13892
+#define CONFIG_POWER_FSL_MC13892
 #define CONFIG_RTC_MC13XXX
 
 /* MMC Configs */
diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h
index 12d79b4..a74508c 100644
--- a/include/configs/mx53loco.h
+++ b/include/configs/mx53loco.h
@@ -82,7 +82,7 @@
 #define CONFIG_POWER_I2C
 #define CONFIG_DIALOG_POWER
 #define CONFIG_POWER_FSL
-#define CONFIG_PMIC_FSL_MC13892
+#define CONFIG_POWER_FSL_MC13892
 #define CONFIG_SYS_DIALOG_PMIC_I2C_ADDR	0x48
 #define CONFIG_SYS_FSL_PMIC_I2C_ADDR	0x8
 
diff --git a/include/configs/neo.h b/include/configs/neo.h
index d549985..4937730 100644
--- a/include/configs/neo.h
+++ b/include/configs/neo.h
@@ -37,6 +37,7 @@
 /* new uImage format support */
 #define CONFIG_FIT
 #define CONFIG_FIT_VERBOSE	/* enable fit_format_{error,warning}() */
+#define CONFIG_FIT_DISABLE_SHA256
 
 #define CONFIG_ENV_IS_IN_FLASH	/* use FLASH for environment vars */
 
@@ -61,10 +62,14 @@
 /*
  * Commands additional to the ones defined in amcc-common.h
  */
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_DATE
 #define CONFIG_CMD_DTT
+#undef CONFIG_CMD_DHCP
+#undef CONFIG_CMD_DIAG
 #undef CONFIG_CMD_EEPROM
+#undef CONFIG_CMD_ELF
+#undef CONFIG_CMD_I2C
+#undef CONFIG_CMD_IRQ
+#undef CONFIG_CMD_NFS
 
 /*
  * SDRAM configuration (please see cpu/ppc/sdram.[ch])
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index 0a7df60..3782049 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -111,6 +111,7 @@
 #define CONFIG_CMD_LED		/* LED support			*/
 #define CONFIG_CMD_SETEXPR	/* Evaluate expressions		*/
 #define CONFIG_CMD_GPIO     /* Enable gpio command */
+#define CONFIG_CMD_DHCP
 
 #define CONFIG_VIDEO_OMAP3	/* DSS Support			*/
 
@@ -295,6 +296,7 @@
 #define CONFIG_SPL_OMAP3_ID_NAND
 
 /* NAND boot config */
+#define CONFIG_SYS_NAND_BUSWIDTH_16BIT	16
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_PAGE_COUNT	64
 #define CONFIG_SYS_NAND_PAGE_SIZE	2048
diff --git a/include/configs/omap3_evm_common.h b/include/configs/omap3_evm_common.h
index 7f3424b..ae4ce63 100644
--- a/include/configs/omap3_evm_common.h
+++ b/include/configs/omap3_evm_common.h
@@ -120,7 +120,7 @@
 
 /* Max number of NAND devices */
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-
+#define CONFIG_SYS_NAND_BUSWIDTH_16BIT	16
 /* Timeout values (in ticks) */
 #define CONFIG_SYS_FLASH_ERASE_TOUT	(100 * CONFIG_SYS_HZ)
 #define CONFIG_SYS_FLASH_WRITE_TOUT	(100 * CONFIG_SYS_HZ)
diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h
index d56d5b0..79daabd 100644
--- a/include/configs/omap3_igep00x0.h
+++ b/include/configs/omap3_igep00x0.h
@@ -187,6 +187,7 @@
 
 /* NAND boot config */
 #ifdef CONFIG_NAND
+#define CONFIG_SYS_NAND_BUSWIDTH_16BIT	16
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_PAGE_COUNT	64
 #define CONFIG_SYS_NAND_PAGE_SIZE	2048
diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h
index 0d03c75..8dcbba3 100644
--- a/include/configs/omap3_logic.h
+++ b/include/configs/omap3_logic.h
@@ -141,6 +141,7 @@
 
 #define CONFIG_SYS_MAX_NAND_DEVICE	1		/* Max number of */
 							/* NAND devices */
+#define CONFIG_SYS_NAND_BUSWIDTH_16BIT	16
 #define CONFIG_JFFS2_NAND
 /* nand device jffs2 lives on */
 #define CONFIG_JFFS2_DEV		"nand0"
diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
index 7b97be9..f7483a0 100644
--- a/include/configs/omap3_overo.h
+++ b/include/configs/omap3_overo.h
@@ -83,7 +83,6 @@
 /* Environment information */
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	DEFAULT_LINUX_BOOT_ENV \
-	"fdtfile=overo.dtb\0" \
 	"bootdir=/boot\0" \
 	"bootfile=zImage\0" \
 	"usbtty=cdc_acm\0" \
@@ -152,10 +151,11 @@
 			"run mmcboot;" \
 		"fi;" \
 		"if run loadzimage; then " \
-			"if test -n $fdtfile; then " \
-				"if run loadfdt; then " \
-					"run mmcbootfdt;" \
-				"fi;" \
+			"if test $fdtfile; then " \
+				"setenv fdtfile omap3-${boardname}-${expansionname}.dtb;" \
+			"fi;" \
+			"if run loadfdt; then " \
+				"run mmcbootfdt;" \
 			"fi;" \
 		"fi;" \
 	"fi;" \
@@ -206,6 +206,7 @@
 #define CONFIG_SYS_CACHELINE_SIZE	64
 
 /* NAND boot config */
+#define CONFIG_SYS_NAND_BUSWIDTH_16BIT	16
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_PAGE_COUNT	64
 #define CONFIG_SYS_NAND_PAGE_SIZE	2048
diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h
index 7c5540f..3efe4cf 100644
--- a/include/configs/omap3_zoom1.h
+++ b/include/configs/omap3_zoom1.h
@@ -98,6 +98,7 @@
 #define CONFIG_SYS_NAND_BASE		NAND_BASE	/* physical address */
 							/* to access nand at */
 							/* CS0 */
+#define CONFIG_SYS_NAND_BUSWIDTH_16BIT	16
 
 /* Environment information */
 
diff --git a/include/configs/peach-pit.h b/include/configs/peach-pit.h
new file mode 100644
index 0000000..76b8d7a
--- /dev/null
+++ b/include/configs/peach-pit.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2013 Samsung Electronics
+ *
+ * Configuration settings for the SAMSUNG/GOOGLE PEACH-PIT board.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __CONFIG_PEACH_PIT_H
+#define __CONFIG_PEACH_PIT_H
+
+#include <configs/exynos5-dt.h>
+
+#include <configs/exynos5420.h>
+
+#undef CONFIG_DEFAULT_DEVICE_TREE
+#define CONFIG_DEFAULT_DEVICE_TREE	exynos5420-peach-pit
+
+/* select serial console configuration */
+#define CONFIG_SERIAL3		/* use SERIAL 3 */
+
+#define CONFIG_SYS_PROMPT	"Peach # "
+#define CONFIG_IDENT_STRING	" for Peach"
+
+#endif	/* __CONFIG_PEACH_PIT_H */
diff --git a/include/configs/pengwyn.h b/include/configs/pengwyn.h
index fc25966..8510405 100644
--- a/include/configs/pengwyn.h
+++ b/include/configs/pengwyn.h
@@ -149,7 +149,6 @@
 #define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
 
-#define GPMC_NAND_ECC_LP_x8_LAYOUT	1
 #define MTDIDS_DEFAULT			"nand0=omap2-nand.0"
 #define MTDPARTS_DEFAULT		"mtdparts=omap2-nand.0:128k(SPL)," \
 					"128k(SPL.backup1)," \
diff --git a/include/configs/quad100hd.h b/include/configs/quad100hd.h
deleted file mode 100644
index e91e805..0000000
--- a/include/configs/quad100hd.h
+++ /dev/null
@@ -1,281 +0,0 @@
-/*
- * (C) Copyright 2008
- * Gary Jennejohn, DENX Software Engineering GmbH, garyj@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/************************************************************************
- * quad100hd.h - configuration for Quad100hd board
- ***********************************************************************/
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*-----------------------------------------------------------------------
- * High Level Configuration Options
- *----------------------------------------------------------------------*/
-#define CONFIG_QUAD100HD	1		/* Board is Quad100hd	*/
-#define CONFIG_405EP		1		/* Specifc 405EP support*/
-
-#define	CONFIG_SYS_TEXT_BASE	0xFFFC0000
-
-#define CONFIG_SYS_CLK_FREQ     33333333 /* external frequency to pll   */
-
-#define CONFIG_BOARD_EARLY_INIT_F 1		/* Call board_early_init_f */
-
-#define PLLMR0_DEFAULT		PLLMR0_266_133_66 /* no PCI */
-#define PLLMR1_DEFAULT		PLLMR1_266_133_66 /* no PCI */
-
-/* the environment is in the EEPROM by default */
-#define CONFIG_ENV_IS_IN_EEPROM
-#undef CONFIG_ENV_IS_IN_FLASH
-
-#define CONFIG_PPC4xx_EMAC
-#define CONFIG_HAS_ETH1		1
-#define CONFIG_MII		1	/* MII PHY management		*/
-#define CONFIG_PHY_ADDR		0x01	/* PHY address			*/
-#define CONFIG_SYS_RX_ETH_BUFFER	16	/* Number of ethernet rx buffers & descriptors */
-#define CONFIG_PHY_RESET	1
-#define CONFIG_PHY_RESET_DELAY	300	/* PHY RESET recovery delay	*/
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#undef CONFIG_CMD_ASKENV
-#undef CONFIG_CMD_CACHE
-#define CONFIG_CMD_DHCP
-#undef CONFIG_CMD_DIAG
-#define CONFIG_CMD_EEPROM
-#undef CONFIG_CMD_ELF
-#define CONFIG_CMD_I2C
-#undef CONFIG_CMD_IRQ
-#define CONFIG_CMD_JFFS2
-#undef CONFIG_CMD_MII
-#define CONFIG_CMD_NAND
-#undef CONFIG_CMD_PING
-#define CONFIG_CMD_REGINFO
-
-#undef CONFIG_WATCHDOG			/* watchdog disabled		*/
-
-/*-----------------------------------------------------------------------
- * SDRAM
- *----------------------------------------------------------------------*/
-/*
- * SDRAM configuration (please see cpu/ppc/sdram.[ch])
- */
-#define CONFIG_SDRAM_BANK0  1
-
-/* FIX! SDRAM timings used in datasheet */
-#define CONFIG_SYS_SDRAM_CL            3       /* CAS latency */
-#define CONFIG_SYS_SDRAM_tRP           20      /* PRECHARGE command period */
-#define CONFIG_SYS_SDRAM_tRC           66      /* ACTIVE-to-ACTIVE command period */
-#define CONFIG_SYS_SDRAM_tRCD          20      /* ACTIVE-to-READ delay */
-#define CONFIG_SYS_SDRAM_tRFC          66      /* Auto refresh period */
-
-/*
- * JFFS2
- */
-#define CONFIG_SYS_JFFS2_FIRST_BANK    0
-#ifdef  CONFIG_SYS_KERNEL_IN_JFFS2
-#define CONFIG_SYS_JFFS2_FIRST_SECTOR  0   /* JFFS starts at block 0 */
-#else /* kernel not in JFFS */
-#define CONFIG_SYS_JFFS2_FIRST_SECTOR  8   /* block 0-7 is kernel (1MB = 8 sectors) */
-#endif
-#define CONFIG_SYS_JFFS2_NUM_BANKS     1
-
-/*-----------------------------------------------------------------------
- * Serial Port
- *----------------------------------------------------------------------*/
-#define CONFIG_CONS_INDEX	1	/* Use UART0			*/
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	1
-#define CONFIG_SYS_NS16550_CLK		get_serial_clock()
-#undef	CONFIG_SYS_EXT_SERIAL_CLOCK			/* external serial clock */
-#define CONFIG_SYS_BASE_BAUD		691200
-#define CONFIG_BAUDRATE		115200
-
-/* The following table includes the supported baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE	\
-	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
-
-/*-----------------------------------------------------------------------
- * Miscellaneous configurable options
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE	        1024	/* Console I/O Buffer Size	*/
-#else
-#define CONFIG_SYS_CBSIZE	        256	/* Console I/O Buffer Size	*/
-#endif
-#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS	        16	/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE	        CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size	*/
-
-#define CONFIG_SYS_MEMTEST_START	0x0400000 /* memtest works on		*/
-#define CONFIG_SYS_MEMTEST_END		0x0C00000 /* 4 ... 12 MB in DRAM	*/
-
-#define CONFIG_SYS_LOAD_ADDR		0x100000  /* default load address	*/
-#define CONFIG_SYS_EXTBDINFO		1	/* To use extended board_info (bd_t) */
-
-#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
-
-#define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
-#define CONFIG_LOOPW            1       /* enable loopw command         */
-#define CONFIG_MX_CYCLIC        1       /* enable mdc/mwc commands      */
-#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
-#define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
-
-/*-----------------------------------------------------------------------
- * I2C
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_PPC4XX
-#define CONFIG_SYS_I2C_PPC4XX_CH0
-#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
-#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0		0x7F
-
-#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50		/* base address */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2		/* bytes of address */
-
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	5	/* 8 byte write page size */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10	/* and takes up to 10 msec */
-#define CONFIG_SYS_EEPROM_SIZE			0x2000
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_FLASH_BASE		0xFFC00000
-#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Monitor	*/
-#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/
-#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_TEXT_BASE)
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_FLASH_CFI			/* The flash is CFI compatible	*/
-#define	CONFIG_FLASH_CFI_DRIVER
-
-#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
-
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks	*/
-#define CONFIG_SYS_MAX_FLASH_SECT	128	/* max number of sectors on one chip */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms) */
-
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster) */
-#define CONFIG_SYS_FLASH_INCREMENT      0       /* there is only one bank         */
-
-#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
-#define CONFIG_SYS_FLASH_QUIET_TEST	1	/* don't warn upon unknown flash */
-
-#ifdef CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_SECT_SIZE	0x10000	/* size of one complete sector	*/
-/* the environment is located before u-boot */
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_TEXT_BASE - CONFIG_ENV_SECT_SIZE)
-
-/* Address and size of Redundant Environment Sector	*/
-#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR - CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SECT_SIZE)
-#endif
-
-#ifdef CONFIG_ENV_IS_IN_EEPROM
-#define CONFIG_ENV_SIZE		0x400		/* Size of Environment vars */
-#define CONFIG_ENV_OFFSET		0x00000000
-#define CONFIG_SYS_ENABLE_CRC_16	1       /* Intrinsyc formatting used crc16 */
-#endif
-
-/* partly from PPCBoot */
-/* NAND */
-#define CONFIG_NAND
-#ifdef CONFIG_NAND
-#define CONFIG_SYS_NAND_BASE   0x60000000
-#define CONFIG_SYS_NAND_CS	10   /* our CS is GPIO10 */
-#define CONFIG_SYS_NAND_RDY	23   /* our RDY is GPIO23 */
-#define CONFIG_SYS_NAND_CE	24   /* our CE is GPIO24  */
-#define CONFIG_SYS_NAND_CLE	31   /* our CLE is GPIO31 */
-#define CONFIG_SYS_NAND_ALE	30   /* our ALE is GPIO30 */
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-
-#endif
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in data cache)
- */
-/* use on chip memory (OCM) for temperary stack until sdram is tested */
-/* see ./arch/powerpc/cpu/ppc4xx/start.S */
-#define CONFIG_SYS_TEMP_STACK_OCM	1
-
-/* On Chip Memory location */
-#define CONFIG_SYS_OCM_DATA_ADDR	0xF8000000
-#define CONFIG_SYS_OCM_DATA_SIZE	0x1000
-#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR /* inside of OCM		*/
-#define CONFIG_SYS_INIT_RAM_SIZE	CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM	*/
-
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * External Bus Controller (EBC) Setup
- * Taken from PPCBoot board/icecube/icecube.h
- */
-
-/* see ./arch/powerpc/cpu/ppc4xx/cpu_init.c ./cpu/ppc4xx/ndfc.c */
-#define CONFIG_SYS_EBC_PB0AP		0x04002480
-/* AMD NOR flash - this corresponds to FLASH_BASE so may be correct */
-#define CONFIG_SYS_EBC_PB0CR		0xFFC5A000
-#define CONFIG_SYS_EBC_PB1AP           0x04005480
-#define CONFIG_SYS_EBC_PB1CR           0x60018000
-#define CONFIG_SYS_EBC_PB2AP           0x00000000
-#define CONFIG_SYS_EBC_PB2CR           0x00000000
-#define CONFIG_SYS_EBC_PB3AP           0x00000000
-#define CONFIG_SYS_EBC_PB3CR           0x00000000
-#define CONFIG_SYS_EBC_PB4AP           0x00000000
-#define CONFIG_SYS_EBC_PB4CR           0x00000000
-
-/*-----------------------------------------------------------------------
- * Definitions for GPIO setup (PPC405EP specific)
- *
- * Taken in part from PPCBoot board/icecube/icecube.h
- */
-/* see ./arch/powerpc/cpu/ppc4xx/cpu_init.c ./cpu/ppc4xx/start.S */
-#define CONFIG_SYS_GPIO0_OSRL		0x55555550
-#define CONFIG_SYS_GPIO0_OSRH		0x00000110
-#define CONFIG_SYS_GPIO0_ISR1L		0x00000000
-#define CONFIG_SYS_GPIO0_ISR1H		0x15555445
-#define CONFIG_SYS_GPIO0_TSRL		0x00000000
-#define CONFIG_SYS_GPIO0_TSRH		0x00000000
-#define CONFIG_SYS_GPIO0_TCR		0xFFFF8097
-#define CONFIG_SYS_GPIO0_ODR		0x00000000
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	230400		/* speed to run kgdb serial port */
-#endif
-
-/* ENVIRONMENT VARS */
-
-#define CONFIG_IPADDR		192.168.1.67
-#define CONFIG_SERVERIP		192.168.1.50
-#define CONFIG_GATEWAYIP	192.168.1.1
-#define CONFIG_NETMASK		255.255.255.0
-#define CONFIG_LOADADDR		300000
-#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds */
-
-/* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT	1
-
-#endif	/* __CONFIG_H */
diff --git a/include/configs/quantum.h b/include/configs/quantum.h
deleted file mode 100644
index f3540c1..0000000
--- a/include/configs/quantum.h
+++ /dev/null
@@ -1,430 +0,0 @@
-/*
- * (C) Copyright 2003-2010
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * board/config.h - configuration options, board specific
- * changes for 16M board
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#undef CONFIG_MPC860
-#define CONFIG_MPC850		1	/* This is a MPC850 CPU		*/
-#define CONFIG_RPXLITE		1	/* QUANTUM is the RPXlite clone */
-#define CONFIG_RMU		1   /* The QUNATUM is based on our RMU */
-
-#define	CONFIG_SYS_TEXT_BASE	0xfff00000
-
-#define CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		*/
-#undef	CONFIG_8xx_CONS_SMC2
-#undef	CONFIG_8xx_CONS_NONE
-#define CONFIG_BAUDRATE		9600	/* console baudrate = 9600bps	*/
-#if 0
-#define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
-#else
-#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
-#endif
-
-/* default developmenmt environment */
-
-#define CONFIG_ETHADDR 00:0B:17:00:00:00
-
-#define CONFIG_IPADDR  10.10.69.10
-#define CONFIG_SERVERIP 10.10.69.49
-#define CONFIG_NETMASK	255.255.255.0
-#define CONFIG_HOSTNAME QUANTUM
-#define CONFIG_ROOTPATH "/opt/eldk/pcc_8xx"
-
-#define CONFIG_BOOTARGS	 "root=/dev/ram rw"
-
-#define CONFIG_BOOTCOMMAND "bootm ff000000"
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
-    "serial#=12345\0"		\
-	"nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath}\0"	\
-	"ramargs=setenv bootargs root=/dev/ram rw\0" \
-    "addip=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off\0"
-
-/*
- * Select the more full-featured memory test (Barr embedded systems)
- */
-#define CONFIG_SYS_ALT_MEMTEST
-
-#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
-
-
-/* M48T02 Paralled access timekeeper with same interface as the M48T35A*/
-#define CONFIG_RTC_M48T35A 1
-
-#if 0
-#define CONFIG_WATCHDOG 1		/* watchdog enabled		*/
-#else
-#undef CONFIG_WATCHDOG
-#endif
-
-/*  NVRAM and RTC */
-#define CONFIG_SYS_NVRAM_BASE_ADDR 0xFA000000
-#define CONFIG_SYS_NVRAM_SIZE 2048
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_SNTP
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-#define CONFIG_AUTOBOOT_KEYED	/* Enable password protection */
-#define CONFIG_AUTOBOOT_PROMPT		\
-	"\nEnter password - autoboot in %d sec...\n", bootdelay
-#define CONFIG_AUTOBOOT_DELAY_STR	"system"
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
-#else
-#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-
-#define CONFIG_SYS_MEMTEST_START	0x00040000	/* memtest works on	*/
-#define CONFIG_SYS_MEMTEST_END		0x01f00000	/* 256K ... 15 MB in DRAM	*/
-
-#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR		0xFA200000
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE	0x2F00	/* Size of used area in DPRAM	*/
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_FLASH_BASE	0xFF000000
-
-#if 1
-    #define CONFIG_FLASH_CFI_DRIVER
-#else
-    #undef CONFIG_FLASH_CFI_DRIVER
-#endif
-
-
-#ifdef CONFIG_FLASH_CFI_DRIVER
-    #define CONFIG_SYS_FLASH_CFI 1
-    #undef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
-    #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE}
-#endif
-
-/*%%% #define CONFIG_SYS_FLASH_BASE		0xFFF00000 */
-#if defined(DEBUG) || defined(CONFIG_CMD_IDE)
-#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#else
-#define CONFIG_SYS_MONITOR_LEN		(128 << 10)	/* Reserve 128 kB for Monitor	*/
-#endif
-#define CONFIG_SYS_MONITOR_BASE	0xFFF00000
-/*%%% #define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE */
-#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CONFIG_SYS_MAX_FLASH_SECT	512	/* max number of sectors on one chip */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
-
-#define CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_OFFSET	    0x00040000	/*   Offset   of Environment Sector	absolute address 0xfff40000*/
-#define CONFIG_ENV_SECT_SIZE	0x40000	/* Total Size of Environment Sector	*/
-#define CONFIG_ENV_SIZE		CONFIG_ENV_SECT_SIZE
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
-
-/* Address and size of Redundant Environment Sector	*/
-#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET+CONFIG_ENV_SIZE)
-#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
-
-/* FPGA */
-#define CONFIG_MISC_INIT_R
-#define CONFIG_SYS_FPGA_SPARTAN2
-#define CONFIG_SYS_FPGA_PROG_FEEDBACK
-
-
-/*-----------------------------------------------------------------------
- * Reset address
- */
-#define CONFIG_SYS_RESET_ADDRESS	((ulong)((((immap_t *)CONFIG_SYS_IMMR)->im_clkrst.res)))
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
-#endif
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control				11-9
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
- */
-#if defined(CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
-			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
-#else
-#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | 0x00000600 | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
-#endif
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration				11-6
- *-----------------------------------------------------------------------
- * PCMCIA config., multi-function pin tri-state
- */
-#define CONFIG_SYS_SIUMCR	(SIUMCR_MLRC10)
-
-/*-----------------------------------------------------------------------
- * TBSCR - Time Base Status and Control				11-26
- *-----------------------------------------------------------------------
- * Clear Reference Interrupt Status, Timebase freezing enabled
- */
-#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF | TBSCR_TBE)
-
-/*-----------------------------------------------------------------------
- * RTCSC - Real-Time Clock Status and Control Register		11-27
- *-----------------------------------------------------------------------
- */
-/*%%%#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) */
-#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_RTE)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control		11-31
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
- */
-#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF)
-
-/*-----------------------------------------------------------------------
- * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
- *-----------------------------------------------------------------------
- * Reset PLL lock status sticky bit, timer expired status bit and timer
- * interrupt status bit
- *
- * If this is a 80 MHz CPU, set PLL multiplication factor to 5 (5*16=80)!
- */
-/* up to 50 MHz we use a 1:1 clock */
-#define CONFIG_SYS_PLPRCR	( (5 << PLPRCR_MF_SHIFT) | PLPRCR_TEXPS )
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock and reset Control Register		15-27
- *-----------------------------------------------------------------------
- * Set clock output, timebase and RTC source and divider,
- * power management and some other internal clocks
- */
-#define SCCR_MASK	SCCR_EBDF00
-/* up to 50 MHz we use a 1:1 clock */
-#define CONFIG_SYS_SCCR	(SCCR_COM00 | SCCR_TBS)
-
-/*-----------------------------------------------------------------------
- * PCMCIA stuff
- *-----------------------------------------------------------------------
- *
- */
-#define CONFIG_SYS_PCMCIA_MEM_ADDR	(0xE0000000)
-#define CONFIG_SYS_PCMCIA_MEM_SIZE	( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_DMA_ADDR	(0xE4000000)
-#define CONFIG_SYS_PCMCIA_DMA_SIZE	( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_ATTRB_ADDR	(0xE8000000)
-#define CONFIG_SYS_PCMCIA_ATTRB_SIZE	( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_IO_ADDR	(0xEC000000)
-#define CONFIG_SYS_PCMCIA_IO_SIZE	( 64 << 20 )
-
-/*-----------------------------------------------------------------------
- * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
- *-----------------------------------------------------------------------
- */
-
-#define CONFIG_IDE_PREINIT	1	/* Use preinit IDE hook */
-#define CONFIG_IDE_8xx_PCCARD	1	/* Use IDE with PC Card Adapter */
-
-#undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE	 not supported	*/
-#undef	CONFIG_IDE_LED			/* LED	 for ide not supported	*/
-#undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
-
-#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
-
-#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
-
-#define CONFIG_SYS_ATA_BASE_ADDR	CONFIG_SYS_PCMCIA_MEM_ADDR
-
-/* Offset for data I/O			*/
-#define CONFIG_SYS_ATA_DATA_OFFSET	(CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
-
-/* Offset for normal register accesses	*/
-#define CONFIG_SYS_ATA_REG_OFFSET	(2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
-
-/* Offset for alternate registers	*/
-#define CONFIG_SYS_ATA_ALT_OFFSET	0x0100
-
-/*-----------------------------------------------------------------------
- *
- *-----------------------------------------------------------------------
- *
- */
-/*#define	CONFIG_SYS_DER 0x2002000F*/
-#define CONFIG_SYS_DER 0
-
-/*
- * Init Memory Controller:
- *
- * BR0 and OR0 (FLASH)
- */
-
-#define FLASH_BASE_PRELIM	0xFE000000	/* FLASH base */
-#define CONFIG_SYS_PRELIM_OR_AM	0xFE000000	/* OR addr mask */
-
-/* FLASH timing: ACS = 0, TRLX = 0, CSNT = 0, SCY = 4, ETHR = 0, BIH = 1 */
-#define CONFIG_SYS_OR_TIMING_FLASH (OR_SCY_4_CLK | OR_BI)
-
-#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE_PRELIM & BR_BA_MSK) | BR_V)
-
-/*
- * BR1 and OR1 (SDRAM)
- *
- */
-#define SDRAM_BASE_PRELIM	0x00000000	/* SDRAM base	*/
-#define SDRAM_MAX_SIZE		0x08000000	/* max 128 MB */
-
-/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
-#define CONFIG_SYS_OR_TIMING_SDRAM	0x00000E00
-
-#define CONFIG_SYS_OR1_PRELIM	(0xF0000000 | CONFIG_SYS_OR_TIMING_SDRAM ) /* map 256 MB */
-#define CONFIG_SYS_BR1_PRELIM	((SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
-
-/* RPXLITE mem setting */
-#define CONFIG_SYS_BR3_PRELIM	0xFA400001		/* FPGA */
-#define CONFIG_SYS_OR3_PRELIM	0xFFFF8910
-
-#define CONFIG_SYS_BR4_PRELIM	0xFA000401		/* NVRAM&SRAM */
-#define CONFIG_SYS_OR4_PRELIM	0xFFFE0970
-
-/*
- * Memory Periodic Timer Prescaler
- */
-
-/* periodic timer for refresh */
-#define CONFIG_SYS_MAMR_PTA	20
-
-/*
- * Refresh clock Prescalar
- */
-#define CONFIG_SYS_MPTPR	MPTPR_PTP_DIV2
-
-/*
- * MAMR settings for SDRAM
- */
-
-/* 9 column SDRAM */
-#define CONFIG_SYS_MAMR_9COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
-			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
-			 MAMR_RLFA_16X | MAMR_WLFA_16X | MAMR_TLFA_16X)
-
-/*
- * BCSRx
- *
- * Board Status and Control Registers
- *
- */
-
-#define BCSR0 0xFA400000
-#define BCSR1 0xFA400001
-#define BCSR2 0xFA400002
-#define BCSR3 0xFA400003
-
-#define BCSR0_ENMONXCVR 0x01	/* Monitor XVCR Control */
-#define BCSR0_ENNVRAM	0x02	/* CS4# Control */
-#define BCSR0_LED5	0x04	/* LED5 control 0='on' 1='off' */
-#define BCSR0_LED4	0x08	/* LED4 control 0='on' 1='off' */
-#define BCSR0_FULLDPLX	0x10	/* Ethernet XCVR Control */
-#define BCSR0_COLTEST	0x20
-#define BCSR0_ETHLPBK	0x40
-#define BCSR0_ETHEN	0x80
-
-#define BCSR1_PCVCTL7	0x01	/* PC Slot B Control */
-#define BCSR1_PCVCTL6	0x02
-#define BCSR1_PCVCTL5	0x04
-#define BCSR1_PCVCTL4	0x08
-#define BCSR1_IPB5SEL	0x10
-
-#define BCSR2_ENPA5HDR	0x08	/* USB Control */
-#define BCSR2_ENUSBCLK	0x10
-#define BCSR2_USBPWREN	0x20
-#define BCSR2_USBSPD	0x40
-#define BCSR2_USBSUSP	0x80
-
-#define BCSR3_BWRTC	0x01	/* Real Time Clock Battery */
-#define BCSR3_BWNVR	0x02	/* NVRAM Battery */
-#define BCSR3_RDY_BSY	0x04	/* Flash Operation */
-#define BCSR3_RPXL	0x08	/* Reserved (reads back '1') */
-#define BCSR3_D27	0x10	/* Dip Switch settings */
-#define BCSR3_D26	0x20
-#define BCSR3_D25	0x40
-#define BCSR3_D24	0x80
-
-#endif	/* __CONFIG_H */
diff --git a/include/configs/rpi_b.h b/include/configs/rpi_b.h
index ed8b4df..ff48598 100644
--- a/include/configs/rpi_b.h
+++ b/include/configs/rpi_b.h
@@ -20,6 +20,7 @@
 #include <linux/sizes.h>
 
 /* Architecture, CPU, etc.*/
+#define CONFIG_SYS_GENERIC_BOARD
 #define CONFIG_ARM1176
 #define CONFIG_BCM2835
 #define CONFIG_ARCH_CPU_INIT
diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h
index 799d4fe..6e795bf 100644
--- a/include/configs/s5p_goni.h
+++ b/include/configs/s5p_goni.h
@@ -17,6 +17,7 @@
 #define CONFIG_S5PC110		1	/* which is in a S5PC110 */
 #define CONFIG_MACH_GONI	1	/* working with Goni */
 
+#include <linux/sizes.h>
 #include <asm/arch/cpu.h>		/* get chip and board defs */
 
 #define CONFIG_ARCH_CPU_INIT
@@ -38,11 +39,9 @@
 #define CONFIG_INITRD_TAG
 #define CONFIG_CMDLINE_EDITING
 
-/*
- * Size of malloc() pool
- * 1MB = 0x100000, 0x100000 = 1024 * 1024
- */
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (1 << 20))
+/* Size of malloc() pool.*/
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 80 * SZ_1M)
+
 /*
  * select serial console configuration
  */
@@ -72,14 +71,27 @@
 #define CONFIG_CMD_CACHE
 #define CONFIG_CMD_REGINFO
 #define CONFIG_CMD_ONENAND
-#define CONFIG_CMD_MTDPARTS
 #define CONFIG_CMD_MMC
-
-#define CONFIG_BOOTDELAY		1
-#define CONFIG_ZERO_BOOTDELAY_CHECK
-
-#define CONFIG_MTD_DEVICE
-#define CONFIG_MTD_PARTITIONS
+#define CONFIG_CMD_DFU
+#define CONFIG_CMD_GPT
+
+/* USB Composite download gadget - g_dnl */
+#define CONFIG_USBDOWNLOAD_GADGET
+#define CONFIG_DFU_FUNCTION
+#define CONFIG_DFU_MMC
+#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_32M
+#define DFU_DEFAULT_POLL_TIMEOUT 300
+
+/* TIZEN THOR downloader support */
+#define CONFIG_CMD_THOR_DOWNLOAD
+#define CONFIG_THOR_FUNCTION
+
+/* USB Samsung's IDs */
+#define CONFIG_G_DNL_VENDOR_NUM 0x04E8
+#define CONFIG_G_DNL_PRODUCT_NUM 0x6601
+#define CONFIG_G_DNL_THOR_VENDOR_NUM CONFIG_G_DNL_VENDOR_NUM
+#define CONFIG_G_DNL_THOR_PRODUCT_NUM 0x685D
+#define CONFIG_G_DNL_MANUFACTURER "Samsung"
 
 /* Actual modem binary size is 16MiB. Add 2MiB for bad block handling */
 #define MTDIDS_DEFAULT		"onenand0=samsung-onenand"
@@ -90,30 +102,52 @@
 				",7m(kernel)"\
 				",1m(log)"\
 				",12m(modem)"\
-				",60m(qboot)"\
-				",-(UBI)\0"
+				",60m(qboot)\0"
 
-#define NORMAL_MTDPARTS_DEFAULT MTDPARTS_DEFAULT
+#define CONFIG_BOOTDELAY		1
+#define CONFIG_ZERO_BOOTDELAY_CHECK
 
-#define CONFIG_BOOTCOMMAND	"run ubifsboot"
+/* partitions definitions */
+#define PARTS_CSA			"csa-mmc"
+#define PARTS_BOOTLOADER	"u-boot"
+#define PARTS_BOOT			"boot"
+#define PARTS_ROOT			"platform"
+#define PARTS_DATA			"data"
+#define PARTS_CSC			"csc"
+#define PARTS_UMS			"ums"
+
+#define CONFIG_DFU_ALT \
+	"u-boot raw 0x80 0x400;" \
+	"uImage ext4 0 2;" \
+	"exynos3-goni.dtb ext4 0 2;" \
+	""PARTS_ROOT" part 0 5\0"
+
+#define PARTS_DEFAULT \
+	"uuid_disk=${uuid_gpt_disk};" \
+	"name="PARTS_CSA",size=8MiB,uuid=${uuid_gpt_"PARTS_CSA"};" \
+	"name="PARTS_BOOTLOADER",size=60MiB," \
+	"uuid=${uuid_gpt_"PARTS_BOOTLOADER"};" \
+	"name="PARTS_BOOT",size=100MiB,uuid=${uuid_gpt_"PARTS_BOOT"};" \
+	"name="PARTS_ROOT",size=1GiB,uuid=${uuid_gpt_"PARTS_ROOT"};" \
+	"name="PARTS_DATA",size=3GiB,uuid=${uuid_gpt_"PARTS_DATA"};" \
+	"name="PARTS_CSC",size=150MiB,uuid=${uuid_gpt_"PARTS_CSC"};" \
+	"name="PARTS_UMS",size=-,uuid=${uuid_gpt_"PARTS_UMS"}\0" \
+
+#define CONFIG_BOOTCOMMAND	"run mmcboot"
 
 #define CONFIG_DEFAULT_CONSOLE	"console=ttySAC2,115200n8\0"
 
-#define CONFIG_RAMDISK_BOOT	"root=/dev/ram0 rw rootfstype=ext2" \
+#define CONFIG_RAMDISK_BOOT	"root=/dev/ram0 rw rootfstype=ext4" \
 		" ${console} ${meminfo}"
 
 #define CONFIG_COMMON_BOOT	"${console} ${meminfo} ${mtdparts}"
 
-#define CONFIG_BOOTARGS	"root=/dev/mtdblock8 ubi.mtd=8 ubi.mtd=3 ubi.mtd=6" \
-		" rootfstype=cramfs " CONFIG_COMMON_BOOT
+#define CONFIG_BOOTARGS	"root=/dev/mtdblock8 rootfstype=ext4 " \
+			CONFIG_COMMON_BOOT
 
 #define CONFIG_UPDATEB	"updateb=onenand erase 0x0 0x100000;" \
 			" onenand write 0x32008000 0x0 0x100000\0"
 
-#define CONFIG_UBI_MTD	" ubi.mtd=${ubiblock} ubi.mtd=3 ubi.mtd=6"
-
-#define CONFIG_UBIFS_OPTION	"rootflags=bulk_read,no_chk_data_crc"
-
 #define CONFIG_MISC_COMMON
 #define CONFIG_MISC_INIT_R
 
@@ -130,42 +164,44 @@
 		"onenand erase 0x01560000 0x1eaa0000;" \
 		"onenand write 0x32000000 0x1260000 0x8C0000\0" \
 	"bootk=" \
-		"onenand read 0x30007FC0 0xc00000 0x600000;" \
+		"run loaduimage;" \
 		"bootm 0x30007FC0\0" \
 	"flashboot=" \
 		"set bootargs root=/dev/mtdblock${bootblock} " \
-		"rootfstype=${rootfstype}" CONFIG_UBI_MTD " ${opts} " \
+		"rootfstype=${rootfstype} ${opts} " \
 		"${lcdinfo} " CONFIG_COMMON_BOOT "; run bootk\0" \
 	"ubifsboot=" \
 		"set bootargs root=ubi0!rootfs rootfstype=ubifs " \
-		CONFIG_UBIFS_OPTION CONFIG_UBI_MTD " ${opts} ${lcdinfo} " \
+		"${opts} ${lcdinfo} " \
 		CONFIG_COMMON_BOOT "; run bootk\0" \
 	"tftpboot=" \
 		"set bootargs root=ubi0!rootfs rootfstype=ubifs " \
-		CONFIG_UBIFS_OPTION CONFIG_UBI_MTD " ${opts} ${lcdinfo} " \
-		CONFIG_COMMON_BOOT "; tftp 0x30007FC0 uImage; " \
-		"bootm 0x30007FC0\0" \
+		"${opts} ${lcdinfo} " CONFIG_COMMON_BOOT \
+		"; tftp 0x30007FC0 uImage; bootm 0x30007FC0\0" \
 	"ramboot=" \
 		"set bootargs " CONFIG_RAMDISK_BOOT \
-		" initrd=0x33000000,8M ramdisk=8192\0" \
+		"initrd=0x33000000,8M ramdisk=8192\0" \
 	"mmcboot=" \
-		"set bootargs root=${mmcblk} rootfstype=${rootfstype}" \
-		CONFIG_UBI_MTD " ${opts} ${lcdinfo} " \
+		"set bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
+		"rootfstype=${rootfstype} ${opts} ${lcdinfo} " \
 		CONFIG_COMMON_BOOT "; run bootk\0" \
 	"boottrace=setenv opts initcall_debug; run bootcmd\0" \
 	"bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \
 	"verify=n\0" \
-	"rootfstype=cramfs\0" \
+	"rootfstype=ext4\0" \
 	"console=" CONFIG_DEFAULT_CONSOLE \
-	"mtdparts=" MTDPARTS_DEFAULT \
 	"meminfo=mem=80M mem=256M@0x40000000 mem=128M@0x50000000\0" \
-	"mmcblk=/dev/mmcblk1p1\0" \
+	"loaduimage=ext4load mmc ${mmcdev}:${mmcbootpart} 0x30007FC0 uImage\0" \
+	"mmcdev=0\0" \
+	"mmcbootpart=2\0" \
+	"mmcrootpart=5\0" \
+	"partitions=" PARTS_DEFAULT \
 	"bootblock=9\0" \
 	"ubiblock=8\0" \
 	"ubi=enabled\0" \
-	"opts=always_resume=1"
+	"opts=always_resume=1\0" \
+	"dfu_alt_info=" CONFIG_DFU_ALT "\0"
 
-/* Miscellaneous configurable options */
 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
 #define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser	*/
 #define CONFIG_SYS_PROMPT	"Goni # "
@@ -192,9 +228,12 @@
 #define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* 256 KiB */
 
 /* FLASH and environment organization */
-#define CONFIG_ENV_IS_IN_ONENAND	1
-#define CONFIG_ENV_SIZE			(256 << 10)	/* 256 KiB, 0x40000 */
-#define CONFIG_ENV_ADDR			(1 << 20)	/* 1 MB, 0x100000 */
+#define CONFIG_MMC_DEFAULT_DEV	0
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV		CONFIG_MMC_DEFAULT_DEV
+#define CONFIG_ENV_SIZE			4096
+#define CONFIG_ENV_OFFSET		((32 - 4) << 10) /* 32KiB - 4KiB */
+#define CONFIG_ENV_OVERWRITE
 
 #define CONFIG_USE_ONENAND_BOARD_INIT
 #define CONFIG_SAMSUNG_ONENAND		1
@@ -202,6 +241,18 @@
 
 #define CONFIG_DOS_PARTITION		1
 
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT4
+#define CONFIG_CMD_EXT4_WRITE
+
+/* write support for filesystems */
+#define CONFIG_FAT_WRITE
+#define CONFIG_EXT4_WRITE
+
+/* GPT */
+#define CONFIG_EFI_PARTITION
+#define CONFIG_PARTITION_UUIDS
+
 #define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_SYS_LOAD_ADDR - 0x1000000)
 
 #define CONFIG_SYS_CACHELINE_SIZE       64
@@ -226,5 +277,8 @@
 #define CONFIG_USB_GADGET
 #define CONFIG_USB_GADGET_S3C_UDC_OTG
 #define CONFIG_USB_GADGET_DUALSPEED
+#define CONFIG_USB_GADGET_VBUS_DRAW 2
+#define CONFIG_CMD_USB_MASS_STORAGE
+#define CONFIG_USB_GADGET_MASS_STORAGE
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/sama5d3_xplained.h b/include/configs/sama5d3_xplained.h
index 41c946d..f72ab0b 100644
--- a/include/configs/sama5d3_xplained.h
+++ b/include/configs/sama5d3_xplained.h
@@ -18,15 +18,20 @@
 #define CONFIG_SYS_AT91_SLOW_CLOCK      32768
 #define CONFIG_SYS_AT91_MAIN_CLOCK      12000000 /* from 12 MHz crystal */
 
-#define CONFIG_AT91FAMILY
 #define CONFIG_ARCH_CPU_INIT
+
+#ifndef CONFIG_SPL_BUILD
 #define CONFIG_SKIP_LOWLEVEL_INIT
+#endif
+
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_DISPLAY_CPUINFO
 
 #define CONFIG_CMD_BOOTZ
 #define CONFIG_OF_LIBFDT		/* Device Tree support */
 
+#define CONFIG_SYS_GENERIC_BOARD
+
 /* general purpose I/O */
 #define CONFIG_AT91_GPIO
 
@@ -74,8 +79,12 @@
 #define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_DDRCS
 #define CONFIG_SYS_SDRAM_SIZE		0x10000000
 
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SYS_INIT_SP_ADDR		0x310000
+#else
 #define CONFIG_SYS_INIT_SP_ADDR \
 	(CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
+#endif
 
 /* NAND flash */
 #define CONFIG_CMD_NAND
@@ -199,4 +208,46 @@
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(4 * 1024 * 1024)
 
+/* SPL */
+#define CONFIG_SPL
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_TEXT_BASE		0x300000
+#define CONFIG_SPL_MAX_SIZE		0x10000
+#define CONFIG_SPL_BSS_START_ADDR	0x20000000
+#define CONFIG_SPL_BSS_MAX_SIZE		0x80000
+#define CONFIG_SYS_SPL_MALLOC_START	0x20080000
+#define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000
+
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_GPIO_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+
+#define CONFIG_SPL_BOARD_INIT
+#define CONFIG_SYS_MONITOR_LEN		(512 << 10)
+
+#ifdef CONFIG_SYS_USE_MMC
+#define CONFIG_SPL_LDSCRIPT		arch/arm/cpu/at91-common/u-boot-spl.lds
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x400
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
+#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION	1
+#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME	"u-boot.img"
+#define CONFIG_SPL_FAT_SUPPORT
+#define CONFIG_SPL_LIBDISK_SUPPORT
+
+#elif CONFIG_SYS_USE_NANDFLASH
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_DRIVERS
+#define CONFIG_SPL_NAND_BASE
+#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x40000
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+#define CONFIG_SYS_NAND_PAGE_SIZE	0x800
+#define CONFIG_SYS_NAND_PAGE_COUNT	64
+#define CONFIG_SYS_NAND_OOBSIZE		64
+#define CONFIG_SYS_NAND_BLOCK_SIZE	0x20000
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS	0x0
+
+#endif
+
 #endif
diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h
index 516be85..da27180 100644
--- a/include/configs/sama5d3xek.h
+++ b/include/configs/sama5d3xek.h
@@ -21,7 +21,6 @@
 #define CONFIG_SYS_AT91_SLOW_CLOCK      32768
 #define CONFIG_SYS_AT91_MAIN_CLOCK      12000000 /* from 12 MHz crystal */
 
-#define CONFIG_AT91FAMILY
 #define CONFIG_ARCH_CPU_INIT
 
 #ifndef CONFIG_SPL_BUILD
@@ -34,6 +33,8 @@
 #define CONFIG_CMD_BOOTZ
 #define CONFIG_OF_LIBFDT		/* Device Tree support */
 
+#define CONFIG_SYS_GENERIC_BOARD
+
 /* general purpose I/O */
 #define CONFIG_AT91_GPIO
 
@@ -281,6 +282,7 @@
 #define CONFIG_SYS_NAND_OOBSIZE		64
 #define CONFIG_SYS_NAND_BLOCK_SIZE	0x20000
 #define CONFIG_SYS_NAND_BAD_BLOCK_POS	0x0
+#define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER
 
 #elif CONFIG_SYS_USE_SERIALFLASH
 #define CONFIG_SPL_SPI_SUPPORT
diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h
index 6bb2546..12b69d9 100644
--- a/include/configs/sandbox.h
+++ b/include/configs/sandbox.h
@@ -16,6 +16,9 @@
 
 #endif
 
+#define CONFIG_IO_TRACE
+#define CONFIG_CMD_IOTRACE
+
 #define CONFIG_SYS_TIMER_RATE		1000000
 
 #define CONFIG_BOOTSTAGE
@@ -41,6 +44,7 @@
 #define CONFIG_RSA
 #define CONFIG_CMD_FDT
 #define CONFIG_DEFAULT_DEVICE_TREE	sandbox
+#define CONFIG_ANDROID_BOOT_IMAGE
 
 #define CONFIG_FS_FAT
 #define CONFIG_FS_EXT4
diff --git a/include/configs/smdk5420.h b/include/configs/smdk5420.h
index 58f706a..606739b 100644
--- a/include/configs/smdk5420.h
+++ b/include/configs/smdk5420.h
@@ -1,58 +1,27 @@
 /*
  * Copyright (C) 2013 Samsung Electronics
  *
- * Configuration settings for the SAMSUNG EXYNOS5420 board.
+ * Configuration settings for the SAMSUNG SMDK5420 board.
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
-#ifndef __CONFIG_5420_H
-#define __CONFIG_5420_H
+#ifndef __CONFIG_SMDK5420_H
+#define __CONFIG_SMDK5420_H
 
 #include <configs/exynos5-dt.h>
 
-#define CONFIG_EXYNOS5420		/* which is in a Exynos5 Family */
+#include <configs/exynos5420.h>
+
 #define CONFIG_SMDK5420			/* which is in a SMDK5420 */
 
 #undef CONFIG_DEFAULT_DEVICE_TREE
 #define CONFIG_DEFAULT_DEVICE_TREE	exynos5420-smdk5420
 
-#define CONFIG_VAR_SIZE_SPL
-
-#define CONFIG_SYS_SDRAM_BASE		0x20000000
-#define CONFIG_SYS_TEXT_BASE		0x23E00000
-
-#define CONFIG_BOARD_REV_GPIO_COUNT	2
-
-/* MACH_TYPE_SMDK5420 macro will be removed once added to mach-types */
-#define MACH_TYPE_SMDK5420		8002 /* Temporary number */
-#define CONFIG_MACH_TYPE		MACH_TYPE_SMDK5420
-
 /* select serial console configuration */
-#define CONFIG_SERIAL3			/* use SERIAL 3 */
-
-#ifdef CONFIG_VAR_SIZE_SPL
-#define CONFIG_SPL_TEXT_BASE		0x02024410
-#else
-#define CONFIG_SPL_TEXT_BASE	0x02024400
-#endif
-
-#define CONFIG_BOOTCOMMAND	"mmc read 20007000 451 2000; bootm 20007000"
-
-#define CONFIG_SYS_PROMPT		"SMDK5420 # "
-#define CONFIG_IDENT_STRING		" for SMDK5420"
-
-#define CONFIG_IRAM_TOP		0x02074000
-/*
- * Put the initial stack pointer 1KB below this to allow room for the
- * SPL marker. This value is arbitrary, but gd_t is placed starting here.
- */
-#define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_IRAM_TOP - 0x800)
-
-#define CONFIG_MAX_I2C_NUM	11
+#define CONFIG_SERIAL3		/* use SERIAL 3 */
 
-/* Enable FIT support and comparison */
-#define CONFIG_FIT
-#define CONFIG_FIT_BEST_MATCH
+#define CONFIG_SYS_PROMPT	"SMDK5420 # "
+#define CONFIG_IDENT_STRING	" for SMDK5420"
 
-#endif	/* __CONFIG_5420_H */
+#endif	/* __CONFIG_SMDK5420_H */
diff --git a/include/configs/socfpga_cyclone5.h b/include/configs/socfpga_cyclone5.h
index 0254249..262e744 100644
--- a/include/configs/socfpga_cyclone5.h
+++ b/include/configs/socfpga_cyclone5.h
@@ -8,6 +8,7 @@
 
 #include <asm/arch/socfpga_base_addrs.h>
 #include "../../board/altera/socfpga/pinmux_config.h"
+#include "../../board/altera/socfpga/iocsr_config.h"
 #include "../../board/altera/socfpga/pll_config.h"
 
 /*
@@ -201,11 +202,23 @@
 #else
 #define CONFIG_SYS_TIMER_RATE		25000000
 #endif
+#define CONFIG_SYS_TIMER_COUNTS_DOWN
 #define CONFIG_SYS_TIMER_COUNTER	(CONFIG_SYS_TIMERBASE + 0x4)
 
 #define CONFIG_ENV_IS_NOWHERE
 
 /*
+ * L4 Watchdog
+ */
+#define CONFIG_HW_WATCHDOG
+#define CONFIG_HW_WATCHDOG_TIMEOUT_MS	2000
+#define CONFIG_DESIGNWARE_WATCHDOG
+#define CONFIG_DW_WDT_BASE		SOCFPGA_L4WD0_ADDRESS
+/* Clocks source frequency to watchdog timer */
+#define CONFIG_DW_WDT_CLOCK_KHZ		25000
+
+
+/*
  * SPL "Second Program Loader" aka Initial Software
  */
 
@@ -237,4 +250,7 @@
 /* Support for lib/libgeneric.o in SPL binary */
 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 
+/* Support for watchdog */
+#define CONFIG_SPL_WATCHDOG_SUPPORT
+
 #endif	/* __CONFIG_H */
diff --git a/include/configs/spc1920.h b/include/configs/spc1920.h
deleted file mode 100644
index 127de00..0000000
--- a/include/configs/spc1920.h
+++ /dev/null
@@ -1,405 +0,0 @@
-/*
- * (C) Copyright 2006
- * Markus Klotzbuecher, DENX Software Engineering, mk@denx.de
- *
- * Configuation settings for the SPC1920 board.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __H
-#define __CONFIG_H
-
-#define CONFIG_SPC1920			1	/* SPC1920 board */
-#define CONFIG_MPC885			1	/* MPC885 CPU */
-
-#define	CONFIG_SYS_TEXT_BASE	0xFFF00000
-
-#define	CONFIG_8xx_CONS_SMC1		/* Console is on SMC1 */
-#undef	CONFIG_8xx_CONS_SMC2
-#undef	CONFIG_8xx_CONS_NONE
-
-#define CONFIG_MII
-#define CONFIG_MII_INIT		1
-#undef CONFIG_ETHER_ON_FEC1
-#define CONFIG_ETHER_ON_FEC2
-#define FEC_ENET
-#define CONFIG_FEC2_PHY		1
-
-#define CONFIG_BAUDRATE		19200
-
-/* use PLD CLK4 instead of brg */
-#define CONFIG_SYS_SPC1920_SMC1_CLK4
-
-#define CONFIG_8xx_OSCLK		10000000 /* 10 MHz oscillator on EXTCLK  */
-#define CONFIG_8xx_CPUCLK_DEFAULT	50000000
-#define CONFIG_SYS_8xx_CPUCLK_MIN		40000000
-#define CONFIG_SYS_8xx_CPUCLK_MAX		133000000
-
-#define CONFIG_SYS_RESET_ADDRESS		0xC0000000
-
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_LAST_STAGE_INIT
-
-#if 0
-#define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
-#else
-#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
-#endif
-
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_NFSBOOTCOMMAND							\
-    "dhcp;"									\
-    "setenv bootargs root=/dev/nfs rw nfsroot=$rootpath "			\
-    "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:eth0:off;"		\
-    "bootm"
-
-#define CONFIG_BOOTCOMMAND							\
-    "setenv bootargs root=/dev/mtdblock2 rw mtdparts=phys:1280K(ROM)ro,-(root) "\
-    "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:eth0:off;"		\
-    "bootm fe080000"
-
-#undef CONFIG_BOOTARGS
-
-#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
-#define CONFIG_BZIP2	 /* include support for bzip2 compressed images */
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_ECHO
-#define CONFIG_CMD_IMMAP
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-
-/*
- * Miscellaneous configurable options
- */
-#define	CONFIG_SYS_LONGHELP				/* undef to save memory		*/
-#define CONFIG_SYS_HUSH_PARSER
-
-#if defined(CONFIG_CMD_KGDB)
-#define	CONFIG_SYS_CBSIZE		1024		/* Console I/O Buffer Size	*/
-#else
-#define	CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
-#endif
-
-#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buffer Size	*/
-#define	CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-
-#define CONFIG_SYS_LOAD_ADDR		0x00100000
-
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 2400, 4800, 9600, 19200 }
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR		0xF0000000
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
-#define	CONFIG_SYS_INIT_RAM_SIZE	0x2F00	/* Size of used area in DPRAM	*/
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
-
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE
-#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 KB for monitor	*/
-
-#ifdef CONFIG_BZIP2
-#define	CONFIG_SYS_MALLOC_LEN		(2500 << 10)	/* Reserve ~2.5 MB for malloc()	*/
-#else
-#define	CONFIG_SYS_MALLOC_LEN		(384 << 10)	/* Reserve 384 kB for malloc()	*/
-#endif /* CONFIG_BZIP2 */
-
-#define	CONFIG_SYS_ALLOC_DPRAM		1	/* use allocation routines	*/
-
-/*
- * Flash
- */
-/*-----------------------------------------------------------------------
- * Flash organisation
- */
-#define CONFIG_SYS_FLASH_BASE          0xFE000000
-#define CONFIG_SYS_FLASH_CFI                           /* The flash is CFI compatible  */
-#define CONFIG_FLASH_CFI_DRIVER                    /* Use common CFI driver        */
-#define CONFIG_SYS_MAX_FLASH_BANKS     1               /* Max number of flash banks    */
-#define CONFIG_SYS_MAX_FLASH_SECT      128             /* Max num of sects on one chip */
-
-/* Environment is in flash */
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_SECT_SIZE       0x40000         /* We use one complete sector   */
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
-
-#define CONFIG_ENV_OVERWRITE
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
-#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
-
-#ifdef CONFIG_CMD_DATE
-# define CONFIG_RTC_DS3231
-# define CONFIG_SYS_I2C_RTC_ADDR      0x68
-#endif
-
-/*-----------------------------------------------------------------------
- * I2C configuration
- */
-#if defined(CONFIG_CMD_I2C)
-/* enable I2C and select the hardware/software driver */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_SOFT		/* I2C bit-banged */
-#define CONFIG_SYS_I2C_SOFT_SPEED	93000	/* 93 kHz is supposed to work */
-#define CONFIG_SYS_I2C_SOFT_SLAVE	0xFE
-/*
- * Software (bit-bang) I2C driver configuration
- */
-#define PB_SCL         0x00000020      /* PB 26 */
-#define PB_SDA         0x00000010      /* PB 27 */
-
-#define I2C_INIT       (immr->im_cpm.cp_pbdir |=  PB_SCL)
-#define I2C_ACTIVE     (immr->im_cpm.cp_pbdir |=  PB_SDA)
-#define I2C_TRISTATE   (immr->im_cpm.cp_pbdir &= ~PB_SDA)
-#define I2C_READ       ((immr->im_cpm.cp_pbdat & PB_SDA) != 0)
-#define I2C_SDA(bit)   if(bit) immr->im_cpm.cp_pbdat |=  PB_SDA; \
-		       else    immr->im_cpm.cp_pbdat &= ~PB_SDA
-#define I2C_SCL(bit)   if(bit) immr->im_cpm.cp_pbdat |=  PB_SCL; \
-		       else    immr->im_cpm.cp_pbdat &= ~PB_SCL
-#define I2C_DELAY      udelay(2)       /* 1/4 I2C clock duration */
-#endif
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control				11-9
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
- */
-#if defined(CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
-			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
-#else
-#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
-#endif
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration				11-6
- *-----------------------------------------------------------------------
- * PCMCIA config., multi-function pin tri-state
- */
-#define CONFIG_SYS_SIUMCR      (SIUMCR_FRC)
-
-/*-----------------------------------------------------------------------
- * TBSCR - Time Base Status and Control				11-26
- *-----------------------------------------------------------------------
- * Clear Reference Interrupt Status, Timebase freezing enabled
- */
-#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBE)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control		11-31
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
- */
-#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock and reset Control Register		15-27
- *-----------------------------------------------------------------------
- * Set clock output, timebase and RTC source and divider,
- * power management and some other internal clocks
- */
-#define SCCR_MASK	SCCR_EBDF11
-/* #define CONFIG_SYS_SCCR	SCCR_TBS */
-#define CONFIG_SYS_SCCR	(SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
-			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
-			 SCCR_DFALCD00)
-
-/*-----------------------------------------------------------------------
- * DER - Debug Enable Register
- *-----------------------------------------------------------------------
- * Set to zero to prevent the processor from entering debug mode
- */
-#define CONFIG_SYS_DER		 0
-
-
-/* Because of the way the 860 starts up and assigns CS0 the entire
- * address space, we have to set the memory controller differently.
- * Normally, you write the option register first, and then enable the
- * chip select by writing the base register.  For CS0, you must write
- * the base register first, followed by the option register.
- */
-
-
-/*
- * Init Memory Controller:
- */
-
-/* BR0 and OR0 (FLASH) */
-#define FLASH_BASE0_PRELIM	CONFIG_SYS_FLASH_BASE	/* FLASH bank #0 */
-
-
-/* used to re-map FLASH both when starting from SRAM or FLASH:
- * restrict access enough to keep SRAM working (if any)
- * but not too much to meddle with FLASH accesses
- */
-#define CONFIG_SYS_REMAP_OR_AM		0x80000000	/* OR addr mask */
-#define CONFIG_SYS_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
-
-/*
- * FLASH timing:
- */
-#define CONFIG_SYS_OR_TIMING_FLASH	(OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
-				 OR_SCY_6_CLK | OR_EHTR | OR_BI)
-
-#define CONFIG_SYS_OR0_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
-
-
-/*
- * SDRAM CS1 UPMB
- */
-#define	CONFIG_SYS_SDRAM_BASE	0x00000000
-#define CONFIG_SYS_SDRAM_BASE_PRELIM CONFIG_SYS_SDRAM_BASE
-#define SDRAM_MAX_SIZE	0x4000000 /* max 64 MB */
-
-#define CONFIG_SYS_PRELIM_OR1_AM	0xF0000000
-/* #define CONFIG_SYS_OR1_TIMING  OR_CSNT_SAM/\*  | OR_G5LS /\\* *\\/ *\/ */
-#define SDRAM_TIMING	OR_SCY_0_CLK	/* SDRAM-Timing */
-
-#define CONFIG_SYS_OR1_PRELIM	(CONFIG_SYS_PRELIM_OR1_AM | OR_CSNT_SAM | OR_G5LS | SDRAM_TIMING)
-#define CONFIG_SYS_BR1_PRELIM  ((CONFIG_SYS_SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMB | BR_V)
-
-/* #define CONFIG_SYS_OR1_FINAL   ((CONFIG_SYS_OR1_AM & OR_AM_MSK) | CONFIG_SYS_OR1_TIMING) */
-/* #define CONFIG_SYS_BR1_FINAL   ((CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMB | BR_V) */
-
-#define CONFIG_SYS_PTB_PER_CLK	((4096 * 16 * 1000) / (4 * 64))
-#define CONFIG_SYS_PTA_PER_CLK 195
-#define CONFIG_SYS_MBMR_PTB	195
-#define CONFIG_SYS_MPTPR	MPTPR_PTP_DIV16
-#define CONFIG_SYS_MAR		0x88
-
-#define CONFIG_SYS_MBMR_8COL  ((CONFIG_SYS_MBMR_PTB << MBMR_PTB_SHIFT) | \
-			MBMR_AMB_TYPE_0 | \
-			MBMR_G0CLB_A10 | \
-			MBMR_DSB_1_CYCL | \
-			MBMR_RLFB_1X | \
-			MBMR_WLFB_1X | \
-			MBMR_TLFB_4X) /* 0x04804114 */ /* 0x10802114 */
-
-#define CONFIG_SYS_MBMR_9COL  ((CONFIG_SYS_MBMR_PTB << MBMR_PTB_SHIFT) | \
-			MBMR_AMB_TYPE_1 | \
-			MBMR_G0CLB_A10 | \
-			MBMR_DSB_1_CYCL | \
-			MBMR_RLFB_1X | \
-			MBMR_WLFB_1X | \
-			MBMR_TLFB_4X) /* 0x04804114 */ /* 0x10802114 */
-
-
-/*
- * DSP Host Port Interface CS3
- */
-#define CONFIG_SYS_SPC1920_HPI_BASE   0x90000000
-#define CONFIG_SYS_PRELIM_OR3_AM      0xF8000000
-
-#define CONFIG_SYS_OR3         (CONFIG_SYS_PRELIM_OR3_AM | \
-				       OR_G5LS | \
-				       OR_SCY_0_CLK | \
-				       OR_BI)
-
-#define CONFIG_SYS_BR3 ((CONFIG_SYS_SPC1920_HPI_BASE & BR_BA_MSK) | \
-					       BR_MS_UPMA | \
-					       BR_PS_16 | \
-					       BR_V)
-
-#define CONFIG_SYS_MAMR (MAMR_GPL_A4DIS | \
-		MAMR_RLFA_5X | \
-		MAMR_WLFA_5X)
-
-#define CONFIG_SPC1920_HPI_TEST
-
-#ifdef CONFIG_SPC1920_HPI_TEST
-#define HPI_REG(x)             (*((volatile u16 *) (CONFIG_SYS_SPC1920_HPI_BASE + x)))
-#define HPI_HPIC_1             HPI_REG(0)
-#define HPI_HPIC_2             HPI_REG(2)
-#define HPI_HPIA_1             HPI_REG(0x2000008)
-#define HPI_HPIA_2             HPI_REG(0x2000008 + 2)
-#define HPI_HPID_INC_1         HPI_REG(0x1000004)
-#define HPI_HPID_INC_2         HPI_REG(0x1000004 + 2)
-#define HPI_HPID_NOINC_1       HPI_REG(0x300000c)
-#define HPI_HPID_NOINC_2       HPI_REG(0x300000c + 2)
-#endif /* CONFIG_SPC1920_HPI_TEST */
-
-/*
- * Ramtron FM18L08 FRAM 32KB on CS4
- */
-#define CONFIG_SYS_SPC1920_FRAM_BASE	0x80100000
-#define CONFIG_SYS_PRELIM_OR4_AM	0xffff8000
-#define CONFIG_SYS_OR4		(CONFIG_SYS_PRELIM_OR4_AM | \
-					OR_ACS_DIV2 | \
-					OR_BI | \
-					OR_SCY_4_CLK | \
-					OR_TRLX)
-
-#define CONFIG_SYS_BR4 ((CONFIG_SYS_SPC1920_FRAM_BASE & BR_BA_MSK) | BR_PS_8 | BR_V)
-
-/*
- * PLD CS5
- */
-#define CONFIG_SYS_SPC1920_PLD_BASE	0x80000000
-#define CONFIG_SYS_PRELIM_OR5_AM	0xffff8000
-
-#define CONFIG_SYS_OR5_PRELIM		(CONFIG_SYS_PRELIM_OR5_AM | \
-					OR_CSNT_SAM | \
-					OR_ACS_DIV1 | \
-					OR_BI | \
-					OR_SCY_0_CLK | \
-					OR_TRLX)
-
-#define CONFIG_SYS_BR5_PRELIM ((CONFIG_SYS_SPC1920_PLD_BASE & BR_BA_MSK) | BR_PS_8 | BR_V)
-
-#endif	/* __CONFIG_H */
diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h
index 3522c1a..0c2f0f1 100644
--- a/include/configs/tam3517-common.h
+++ b/include/configs/tam3517-common.h
@@ -185,6 +185,7 @@
 /* Configure the PISMO */
 #define PISMO1_NAND_SIZE		GPMC_SIZE_128M
 
+#define CONFIG_NAND
 #define CONFIG_NAND_OMAP_GPMC
 #define CONFIG_ENV_IS_IN_NAND
 #define SMNAND_ENV_OFFSET		0x180000 /* environment starts here */
@@ -249,6 +250,7 @@
 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000
 
 /* NAND boot config */
+#define CONFIG_SYS_NAND_BUSWIDTH_16BIT	16
 #define CONFIG_SYS_NAND_PAGE_COUNT	64
 #define CONFIG_SYS_NAND_PAGE_SIZE	2048
 #define CONFIG_SYS_NAND_OOBSIZE		64
diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h
index 9c04c23..1b0fee9 100644
--- a/include/configs/tao3530.h
+++ b/include/configs/tao3530.h
@@ -137,10 +137,10 @@
 #define CONFIG_SYS_NAND_BASE		NAND_BASE	/* physical address */
 							/* to access nand at */
 							/* CS0 */
-#define GPMC_NAND_ECC_LP_x16_LAYOUT
 
 #define CONFIG_SYS_MAX_NAND_DEVICE	1		/* Max number of NAND */
 							/* devices */
+#define CONFIG_SYS_NAND_BUSWIDTH_16BIT	16
 /* Environment information */
 #define CONFIG_BOOTDELAY		3
 
diff --git a/include/configs/tb100.h b/include/configs/tb100.h
new file mode 100644
index 0000000..8a861a8
--- /dev/null
+++ b/include/configs/tb100.h
@@ -0,0 +1,123 @@
+/*
+ * Copyright (C) 2011-2014 Pierrick Hascoet, Abilis Systems
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _CONFIG_TB100_H_
+#define _CONFIG_TB100_H_
+
+#include <linux/sizes.h>
+
+/*
+ *  CPU configuration
+ */
+#define CONFIG_ARC700
+#define CONFIG_ARC_MMU_VER		3
+#define CONFIG_SYS_CACHELINE_SIZE	32
+#define CONFIG_SYS_CLK_FREQ		500000000
+#define CONFIG_SYS_TIMER_RATE		CONFIG_SYS_CLK_FREQ
+
+/*
+ * Board configuration
+ */
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_ARCH_EARLY_INIT_R
+
+/*
+ * Memory configuration
+ */
+#define CONFIG_SYS_TEXT_BASE		0x84000000
+#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE
+
+#define CONFIG_SYS_DDR_SDRAM_BASE	0x80000000
+#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
+#define CONFIG_SYS_SDRAM_SIZE		SZ_128M
+
+#define CONFIG_SYS_INIT_SP_ADDR		\
+	(CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
+
+#define CONFIG_SYS_MALLOC_LEN		SZ_128K
+#define CONFIG_SYS_BOOTM_LEN		SZ_32M
+#define CONFIG_SYS_LOAD_ADDR		0x82000000
+
+#define CONFIG_SYS_NO_FLASH
+
+/*
+ * UART configuration
+ */
+#define CONFIG_CONS_INDEX		1
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	-4
+#define CONFIG_SYS_NS16550_CLK		166666666
+#define CONFIG_SYS_NS16550_COM1		0xFF100000
+#define CONFIG_SYS_NS16550_MEM32
+
+#define CONFIG_BAUDRATE			115200
+
+/*
+ * Ethernet PHY configuration
+ */
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_GIGE
+
+/*
+ * Even though the board houses Realtek RTL8211E PHY
+ * corresponding PHY driver (drivers/net/phy/realtek.c) behaves unexpectedly.
+ * In particular "parse_status" reports link is down.
+ *
+ * Until Realtek PHY driver is fixed fall back to generic PHY driver
+ * which implements all required functionality and behaves much more stable.
+ *
+ * #define CONFIG_PHY_REALTEK
+ *
+ */
+
+/*
+ * Ethernet configuration
+ */
+#define CONFIG_DESIGNWARE_ETH
+#define ETH0_BASE_ADDRESS		0xFE100000
+#define ETH1_BASE_ADDRESS		0xFE110000
+
+/*
+ * Command line configuration
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_PING
+
+#define CONFIG_OF_LIBFDT
+
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_MAXARGS		16
+
+/*
+ * Environment settings
+ */
+#define CONFIG_ENV_IS_NOWHERE
+#define CONFIG_ENV_SIZE			SZ_2K
+#define CONFIG_ENV_OFFSET		0
+
+/*
+ * Environment configuration
+ */
+#define CONFIG_BOOTDELAY		3
+#define CONFIG_BOOTFILE			"uImage"
+#define CONFIG_BOOTARGS			"console=ttyS0,115200n8"
+#define CONFIG_LOADADDR			CONFIG_SYS_LOAD_ADDR
+
+/*
+ * Console configuration
+ */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_PROMPT		"[tb100]:~# "
+#define CONFIG_SYS_CBSIZE		256
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
+						sizeof(CONFIG_SYS_PROMPT) + 16)
+
+#endif /* _CONFIG_TB100_H_ */
diff --git a/include/configs/tegra-common-post.h b/include/configs/tegra-common-post.h
index 76dad4e..1c770c9 100644
--- a/include/configs/tegra-common-post.h
+++ b/include/configs/tegra-common-post.h
@@ -101,13 +101,12 @@
 	\
 	"do_sysboot_boot="                                                \
 		"sysboot ${devtype} ${devnum}:${rootpart} any "           \
-			"${scriptaddr} ${prefix}extlinux.conf\0"          \
+			"${scriptaddr} ${prefix}extlinux/extlinux.conf\0" \
 	\
 	"sysboot_boot="                                                   \
 		"if test -e ${devtype} ${devnum}:${rootpart} "            \
-				"${prefix}extlinux.conf; then "           \
-			"echo Found extlinux config "                     \
-				"${prefix}extlinux.conf; "                \
+				"${prefix}extlinux/extlinux.conf; then "  \
+			"echo Found ${prefix}extlinux/extlinux.conf; "    \
 			"run do_sysboot_boot; "                           \
 			"echo SCRIPT FAILED: continuing...; "             \
 		"fi\0"                                                    \
@@ -174,6 +173,8 @@
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	TEGRA_DEVICE_SETTINGS \
 	MEM_LAYOUT_ENV_SETTINGS \
+	"fdt_high=ffffffff\0" \
+	"initrd_high=ffffffff\0" \
 	BOOTCMDS_COMMON \
 	BOARD_EXTRA_ENV_SETTINGS
 
diff --git a/include/configs/tegra-common-ums.h b/include/configs/tegra-common-ums.h
new file mode 100644
index 0000000..578ca68
--- /dev/null
+++ b/include/configs/tegra-common-ums.h
@@ -0,0 +1,26 @@
+/*
+ * (C) Copyright 2014
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0
+ */
+
+#ifndef _TEGRA_COMMON_UMS_H_
+#define _TEGRA_COMMON_UMS_H_
+
+#ifndef CONFIG_SPL_BUILD
+/* USB gadget, and mass storage protocol */
+#define CONFIG_USB_GADGET
+#define CONFIG_USB_GADGET_VBUS_DRAW    2
+#define CONFIG_CI_UDC
+#define CONFIG_CI_UDC_HAS_HOSTPC
+#define CONFIG_USB_GADGET_DUALSPEED
+#define CONFIG_G_DNL_VENDOR_NUM 0x0955
+#define CONFIG_G_DNL_PRODUCT_NUM 0x701A
+#define CONFIG_G_DNL_MANUFACTURER "NVIDIA"
+#define CONFIG_USBDOWNLOAD_GADGET
+#define CONFIG_USB_GADGET_MASS_STORAGE
+#define CONFIG_CMD_USB_MASS_STORAGE
+#endif
+
+#endif /* _TEGRA_COMMON_UMS_H */
diff --git a/include/configs/tegra-common.h b/include/configs/tegra-common.h
index 129acf2..3b88a83 100644
--- a/include/configs/tegra-common.h
+++ b/include/configs/tegra-common.h
@@ -19,6 +19,9 @@
 
 #include <asm/arch/tegra.h>		/* get chip and board defs */
 
+#define CONFIG_DM
+#define CONFIG_CMD_DM
+
 #define CONFIG_SYS_TIMER_RATE		1000000
 #define CONFIG_SYS_TIMER_COUNTER	NV_PA_TMRUS_BASE
 
diff --git a/include/configs/ti_am335x_common.h b/include/configs/ti_am335x_common.h
index 128b66e..80976e7 100644
--- a/include/configs/ti_am335x_common.h
+++ b/include/configs/ti_am335x_common.h
@@ -75,6 +75,15 @@
 #define CONFIG_SKIP_LOWLEVEL_INIT
 #endif
 
+/*
+ * When building U-Boot such that there is no previous loader
+ * we need to call board_early_init_f.  This is taken care of in
+ * s_init when we have SPL used.
+ */
+#if !defined(CONFIG_SKIP_LOWLEVEL_INIT) && !defined(CONFIG_SPL)
+#define CONFIG_BOARD_EARLY_INIT_F
+#endif
+
 #ifdef CONFIG_NAND
 #define CONFIG_SPL_NAND_AM33XX_BCH	/* ELM support */
 #endif
diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h
index 4854272..6e0bf09 100644
--- a/include/configs/ti_armv7_common.h
+++ b/include/configs/ti_armv7_common.h
@@ -127,7 +127,7 @@
  * we are on so we do not need to rely on the command prompt.  We set a
  * console baudrate of 115200 and use the default baud rate table.
  */
-#define CONFIG_SYS_MALLOC_LEN		(1024 << 10)
+#define CONFIG_SYS_MALLOC_LEN		(16 << 20)
 #define CONFIG_SYS_HUSH_PARSER
 #define CONFIG_SYS_PROMPT		"U-Boot# "
 #define CONFIG_SYS_CONSOLE_INFO_QUIET
@@ -196,7 +196,8 @@
  * under common/spl/.  Given our generally common memory map, we set a
  * number of related defaults and sizes here.
  */
-#ifndef CONFIG_NOR_BOOT
+#if !defined(CONFIG_NOR_BOOT) && \
+	!(defined(CONFIG_QSPI_BOOT) && defined(CONFIG_AM43XX))
 #define CONFIG_SPL
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_OS_BOOT
diff --git a/include/configs/ti_omap4_common.h b/include/configs/ti_omap4_common.h
index 44b3718..30b02f6 100644
--- a/include/configs/ti_omap4_common.h
+++ b/include/configs/ti_omap4_common.h
@@ -126,7 +126,7 @@
 		"if test $board_name = panda-es; then " \
 			"setenv fdtfile omap4-panda-es.dtb; fi;" \
 		"if test $board_name = duovero; then " \
-			"setenv fdtfile omap4-duovero.dtb; fi;" \
+			"setenv fdtfile omap4-duovero-parlor.dtb; fi;" \
 		"if test $fdtfile = undefined; then " \
 			"echo WARNING: Could not determine device tree to use; fi; \0" \
 	"loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
diff --git a/include/configs/ti_omap5_common.h b/include/configs/ti_omap5_common.h
index a582fa4..cb928ab 100644
--- a/include/configs/ti_omap5_common.h
+++ b/include/configs/ti_omap5_common.h
@@ -67,6 +67,7 @@
 #define PARTS_DEFAULT
 #endif
 
+#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	DEFAULT_LINUX_BOOT_ENV \
 	"console=" CONSOLEDEV ",115200n8\0" \
@@ -116,6 +117,8 @@
 			"setenv fdtfile omap5-uevm.dtb; fi; " \
 		"if test $board_name = dra7xx; then " \
 			"setenv fdtfile dra7-evm.dtb; fi;" \
+		"if test $board_name = dra72x; then " \
+			"setenv fdtfile dra72-evm.dtb; fi;" \
 		"if test $fdtfile = undefined; then " \
 			"echo WARNING: Could not determine device tree to use; fi; \0" \
 	"loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile};\0" \
diff --git a/include/configs/tseries.h b/include/configs/tseries.h
index e550afa..1fd6e32 100644
--- a/include/configs/tseries.h
+++ b/include/configs/tseries.h
@@ -157,7 +157,6 @@
 /* don't change OMAP_ELM, ECCSCHEME. ROM code only supports this */
 #define CONFIG_NAND_OMAP_ELM
 #define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW
-#define GPMC_NAND_ECC_LP_x16_LAYOUT	1
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128*1024)
 #define CONFIG_SYS_NAND_PAGE_SIZE	2048
diff --git a/include/configs/v37.h b/include/configs/v37.h
deleted file mode 100644
index 0d01fe2..0000000
--- a/include/configs/v37.h
+++ /dev/null
@@ -1,375 +0,0 @@
-/*
- * (C) Copyright 2000, 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC823		1	/* This is a MPC823 CPU		*/
-#define CONFIG_V37		1	/* ...on a Marel V37 board	*/
-
-#define	CONFIG_SYS_TEXT_BASE	0x40000000
-
-#define CONFIG_LCD
-#define CONFIG_MPC8XX_LCD
-#define CONFIG_SHARP_LQ084V1DG21
-#undef CONFIG_LCD_LOGO
-
-/*-----------------------------------------------------------------------------
- * I2C Configuration
- *-----------------------------------------------------------------------------
- */
-#define CONFIG_I2C              1
-#define CONFIG_SYS_I2C_SLAVE           0x2
-
-#define	CONFIG_8xx_CONS_SMC1	1
-#undef	CONFIG_8xx_CONS_SMC2		/* Console is on SMC2		*/
-#undef	CONFIG_8xx_CONS_NONE
-#define CONFIG_BAUDRATE		9600	/* console baudrate = 115kbps	*/
-#if 0
-#define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
-#else
-#define CONFIG_BOOTDELAY	2	/* autoboot after 2 seconds	*/
-#endif
-
-#define	CONFIG_CLOCKS_IN_MHZ	1	/* clocks passsed to Linux in MHz */
-#define CONFIG_PREBOOT	"echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo"
-
-#undef	CONFIG_BOOTARGS
-
-#define CONFIG_BOOTCOMMAND							\
-	"tftpboot; "								\
-	"setenv bootargs console=tty0 "                                   \
-	"root=/dev/nfs rw nfsroot=${serverip}:${rootpath} "			\
-	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; "	\
-	"bootm"
-
-#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
-
-#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
-
-#define	CONFIG_CAN_DRIVER	1	/* CAN Driver support enabled	*/
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-#define CONFIG_MAC_PARTITION
-#define CONFIG_DOS_PARTITION
-
-#define	CONFIG_RTC_MPC8xx		/* use internal RTC of MPC8xx	*/
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_DATE
-
-
-/*
- * JFFS2 partitions
- *
- */
-/* No command line, one static partition, whole device */
-#undef CONFIG_CMD_MTDPARTS
-#define CONFIG_JFFS2_DEV		"nor1"
-#define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
-#define CONFIG_JFFS2_PART_OFFSET	0x00000000
-
-/* mtdparts command line support */
-/* Note: fake mtd_id used, no linux mtd map file */
-/*
-#define CONFIG_CMD_MTDPARTS
-#define MTDIDS_DEFAULT		"nor1=v37-1"
-#define MTDPARTS_DEFAULT	"mtdparts=v37-1:-(jffs2)"
-*/
-
-/*
- * Miscellaneous configurable options
- */
-#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
-#if defined(CONFIG_CMD_KGDB)
-#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
-#else
-#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
-#endif
-#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-
-#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
-
-#define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR		0xF0000000
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
-#define	CONFIG_SYS_INIT_RAM_SIZE	0x2F00	/* Size of used area in DPRAM	*/
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define	CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_FLASH_BASE0		0x40000000
-#define CONFIG_SYS_FLASH_BASE1		0x60000000
-#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_FLASH_BASE1
-
-#if defined(DEBUG)
-#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#else
-#define	CONFIG_SYS_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
-#endif
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE0
-#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#define CONFIG_SYS_MAX_FLASH_SECT	35	/* max number of sectors on one chip	*/
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
-
-#define	CONFIG_ENV_IS_IN_NVRAM	1
-#define	CONFIG_ENV_ADDR		0x80000000/* Address of Environment */
-#define	CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
-
-#define CONFIG_ENV_OFFSET		0
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
-#endif
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control				11-9
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
- */
-#if defined(CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
-			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
-#else
-#define CONFIG_SYS_SYPCR	0xFFFFFF88
-#endif
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration				11-6
- *-----------------------------------------------------------------------
- * PCMCIA config., multi-function pin tri-state
- */
-#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_FRC | SIUMCR_GB5E)
-
-/*-----------------------------------------------------------------------
- * TBSCR - Time Base Status and Control				11-26
- *-----------------------------------------------------------------------
- * Clear Reference Interrupt Status, Timebase freezing enabled
- */
-#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBE)
-
-/*-----------------------------------------------------------------------
- * RTCSC - Real-Time Clock Status and Control Register		11-27
- *-----------------------------------------------------------------------
- */
-/*%%%#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) */
-#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_RTE)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control		11-31
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
- */
-#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF)
-/*
-#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF)
-*/
-
-/*-----------------------------------------------------------------------
- * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
- *-----------------------------------------------------------------------
- * Reset PLL lock status sticky bit, timer expired status bit and timer
- * interrupt status bit
- *
- * If this is a 80 MHz CPU, set PLL multiplication factor to 5 (5*16=80)!
- */
-/* up to 50 MHz we use a 1:1 clock */
-#define CONFIG_SYS_PLPRCR	( (1524 << PLPRCR_MF_SHIFT) | PLPRCR_SPLSS | PLPRCR_TMIST | PLPRCR_TEXPS )
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock and reset Control Register		15-27
- *-----------------------------------------------------------------------
- * Set clock output, timebase and RTC source and divider,
- * power management and some other internal clocks
- */
-#define SCCR_MASK	SCCR_EBDF11
-/* up to 50 MHz we use a 1:1 clock */
-#define CONFIG_SYS_SCCR	(SCCR_COM00 | SCCR_TBS)
-
-/*-----------------------------------------------------------------------
- * PCMCIA stuff
- *-----------------------------------------------------------------------
- *
- */
-#define CONFIG_SYS_PCMCIA_MEM_ADDR	(0xE0000000)
-#define CONFIG_SYS_PCMCIA_MEM_SIZE	( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_DMA_ADDR	(0xE4000000)
-#define CONFIG_SYS_PCMCIA_DMA_SIZE	( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_ATTRB_ADDR	(0xE8000000)
-#define CONFIG_SYS_PCMCIA_ATTRB_SIZE	( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_IO_ADDR	(0xEC000000)
-#define CONFIG_SYS_PCMCIA_IO_SIZE	( 64 << 20 )
-
-/*-----------------------------------------------------------------------
- * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
- *-----------------------------------------------------------------------
- */
-
-#undef	CONFIG_IDE_PCCARD		/* Use IDE with PC Card	Adapter	*/
-
-#undef	CONFIG_IDE_PCMCIA		/* Direct IDE    not supported	*/
-#undef	CONFIG_IDE_LED			/* LED   for ide not supported	*/
-#undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
-
-#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
-
-#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
-
-#define CONFIG_SYS_ATA_BASE_ADDR	CONFIG_SYS_PCMCIA_MEM_ADDR
-
-/* Offset for data I/O			*/
-#define CONFIG_SYS_ATA_DATA_OFFSET	(CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
-
-/* Offset for normal register accesses	*/
-#define CONFIG_SYS_ATA_REG_OFFSET	(2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
-
-/* Offset for alternate registers	*/
-#define CONFIG_SYS_ATA_ALT_OFFSET	0x0100
-
-/*-----------------------------------------------------------------------
- *
- *-----------------------------------------------------------------------
- *
- */
-#define CONFIG_SYS_DER	0
-
-/*
- * Init Memory Controller:
- *
- * BR0 and OR0 (FLASH)
- */
-
-#define FLASH_BASE0_PRELIM	0x40000000	/* FLASH bank #0	*/
-#define FLASH_BASE1_PRELIM	0x60000000	/* FLASH bank #1	*/
-
-#define CONFIG_SYS_PRELIM_OR_AM	0xFE000000	/* OR addr mask */
-
-#define CONFIG_SYS_OR_TIMING_FLASH	0xF56
-
-#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V)
-
-#define CONFIG_SYS_OR5_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_BR5_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_PS_32 | BR_V)
-
-/*
- * BR1 and OR1 (Battery backed SRAM)
- */
-#define	CONFIG_SYS_BR1_PRELIM	0x80000401
-#define CONFIG_SYS_OR1_PRELIM	0xFFC00736
-
-/*
- * BR2 and OR2 (SDRAM)
- */
-#define SDRAM_BASE_PRELIM	0x00000000	/* SDRAM base	*/
-#define	SDRAM_MAX_SIZE		0x04000000	/* max 64 MB */
-
-#define CONFIG_SYS_OR_TIMING_SDRAM	0x00000A00
-
-#define CONFIG_SYS_OR2_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM )
-#define CONFIG_SYS_BR2_PRELIM	((SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
-
-/* Marel V37 mem setting */
-
-#define	CONFIG_SYS_BR3_CAN	0xC0000401
-#define CONFIG_SYS_OR3_CAN	0xFFFF0724
-
-/*
-#define	CONFIG_SYS_BR3_PRELIM	0xFA400001
-#define CONFIG_SYS_OR3_PRELIM	0xFFFF8910
-#define	CONFIG_SYS_BR4_PRELIM	0xFA000401
-#define CONFIG_SYS_OR4_PRELIM	0xFFFE0970
-*/
-
-/*
- * Memory Periodic Timer Prescaler
- */
-
-/* periodic timer for refresh */
-#define CONFIG_SYS_MAMR_PTA	97		/* start with divider for 100 MHz	*/
-
-/*
- * Refresh clock Prescalar
- */
-#define CONFIG_SYS_MPTPR	MPTPR_PTP_DIV16
-
-/*
- * MAMR settings for SDRAM
- */
-
-/* 10 column SDRAM */
-#define CONFIG_SYS_MAMR_10COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
-			 MAMR_AMA_TYPE_2 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A12 |	\
-			 MAMR_GPL_A4DIS | MAMR_RLFA_4X | MAMR_WLFA_3X | MAMR_TLFA_16X)
-
-#endif	/* __CONFIG_H */
diff --git a/include/configs/venice2.h b/include/configs/venice2.h
index 2d75f50..c4a1b94 100644
--- a/include/configs/venice2.h
+++ b/include/configs/venice2.h
@@ -63,6 +63,7 @@
 /* USB Host support */
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_TEGRA
+#define CONFIG_USB_MAX_CONTROLLER_COUNT	2
 #define CONFIG_USB_STORAGE
 #define CONFIG_CMD_USB
 
@@ -74,6 +75,7 @@
 #define CONFIG_CMD_NET
 #define CONFIG_CMD_DHCP
 
+#include "tegra-common-ums.h"
 #include "tegra-common-post.h"
 
 #endif /* __CONFIG_H */
diff --git a/include/configs/vexpress_aemv8a.h b/include/configs/vexpress_aemv8a.h
index dff6adc..1905d13 100644
--- a/include/configs/vexpress_aemv8a.h
+++ b/include/configs/vexpress_aemv8a.h
@@ -10,9 +10,20 @@
 
 #define DEBUG
 
+#ifdef CONFIG_BASE_FVP
+#ifndef CONFIG_SEMIHOSTING
+#error CONFIG_BASE_FVP requires CONFIG_SEMIHOSTING
+#endif
+#define CONFIG_BOARD_LATE_INIT
+#define CONFIG_ARMV8_SWITCH_TO_EL1
+#endif
+
 #define CONFIG_REMAKE_ELF
 
+#ifndef CONFIG_BASE_FVP
+/* Base FVP not using GICv3 yet */
 #define CONFIG_GICV3
+#endif
 
 /*#define CONFIG_ARMV8_SWITCH_TO_EL1*/
 
@@ -30,8 +41,14 @@
 #define CONFIG_BOOTP_VCI_STRING		"U-boot.armv8.vexpress_aemv8a"
 
 /* Link Definitions */
+#ifdef CONFIG_BASE_FVP
+/* ATF loads u-boot here for BASE_FVP model */
+#define CONFIG_SYS_TEXT_BASE		0x88000000
+#define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0x03f00000)
+#else
 #define CONFIG_SYS_TEXT_BASE		0x80000000
 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
+#endif
 
 /* Flat Device Tree Definitions */
 #define CONFIG_OF_LIBFDT
@@ -39,7 +56,11 @@
 #define CONFIG_DEFAULT_DEVICE_TREE	vexpress64
 
 /* SMP Spin Table Definitions */
+#ifdef CONFIG_BASE_FVP
+#define CPU_RELEASE_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x03f00000)
+#else
 #define CPU_RELEASE_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x7fff0)
+#endif
 
 /* CS register bases for the original memory map. */
 #define V2M_PA_CS0			0x00000000
@@ -99,9 +120,15 @@
 #define GICD_BASE			(0x2f000000)
 #define GICR_BASE			(0x2f100000)
 #else
+
+#ifdef CONFIG_BASE_FVP
+#define GICD_BASE			(0x2f000000)
+#define GICC_BASE			(0x2c000000)
+#else
 #define GICD_BASE			(0x2C001000)
 #define GICC_BASE			(0x2C002000)
 #endif
+#endif
 
 #define CONFIG_SYS_MEMTEST_START	V2M_BASE
 #define CONFIG_SYS_MEMTEST_END		(V2M_BASE + 0x80000000)
@@ -121,7 +148,6 @@
 #define CONFIG_CONS_INDEX		0
 
 #define CONFIG_BAUDRATE			115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 #define CONFIG_SYS_SERIAL0		V2M_UART0
 #define CONFIG_SYS_SERIAL1		V2M_UART1
 
@@ -165,17 +191,41 @@
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
 
 /* Initial environment variables */
+#ifdef CONFIG_BASE_FVP
+#define CONFIG_EXTRA_ENV_SETTINGS	\
+				"kernel_name=uImage\0"	\
+				"kernel_addr_r=0x80000000\0"	\
+				"initrd_name=ramdisk.img\0"	\
+				"initrd_addr_r=0x88000000\0"	\
+				"fdt_name=devtree.dtb\0"		\
+				"fdt_addr_r=0x83000000\0"		\
+				"fdt_high=0xffffffffffffffff\0"	\
+				"initrd_high=0xffffffffffffffff\0"
+
+#define CONFIG_BOOTARGS		"console=ttyAMA0 earlyprintk=pl011,"\
+				"0x1c090000 debug user_debug=31 "\
+				"loglevel=9"
+
+#define CONFIG_BOOTCOMMAND	"fdt addr $fdt_addr_r; fdt resize; " \
+				"fdt chosen $initrd_addr_r $initrd_end; " \
+				"bootm $kernel_addr_r - $fdt_addr_r"
+
+#define CONFIG_BOOTDELAY		1
+
+#else
+
 #define CONFIG_EXTRA_ENV_SETTINGS	\
-					"kernel_addr=0x200000\0"	\
-					"initrd_addr=0xa00000\0"	\
+					"kernel_addr_r=0x200000\0"	\
+					"initrd_addr_r=0xa00000\0"	\
 					"initrd_size=0x2000000\0"	\
-					"fdt_addr=0x100000\0"		\
+					"fdt_addr_r=0x100000\0"		\
 					"fdt_high=0xa0000000\0"
 
 #define CONFIG_BOOTARGS			"console=ttyAMA0 root=/dev/ram0"
-#define CONFIG_BOOTCOMMAND		"bootm $kernel_addr " \
-					"$initrd_addr:$initrd_size $fdt_addr"
+#define CONFIG_BOOTCOMMAND		"bootm $kernel_addr_r " \
+					"$initrd_addr_r:$initrd_size $fdt_addr_r"
 #define CONFIG_BOOTDELAY		-1
+#endif
 
 /* Do not preserve environment */
 #define CONFIG_ENV_IS_NOWHERE		1
@@ -187,7 +237,6 @@
 #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
 					sizeof(CONFIG_SYS_PROMPT) + 16)
 #define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_CMDLINE_EDITING		1
diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h
index 500fd2f..0342550 100644
--- a/include/configs/vf610twr.h
+++ b/include/configs/vf610twr.h
@@ -68,6 +68,18 @@
 #define CONFIG_PHYLIB
 #define CONFIG_PHY_MICREL
 
+/* QSPI Configs*/
+#define CONFIG_FSL_QSPI
+
+#ifdef CONFIG_FSL_QSPI
+#define CONFIG_CMD_SF
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_SPANSION
+#define FSL_QSPI_FLASH_SIZE		(1 << 24)
+#define FSL_QSPI_FLASH_NUM		2
+#define CONFIG_SYS_FSL_QSPI_LE
+#endif
+
 /* I2C Configs */
 #define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
diff --git a/include/configs/vl_ma2sc.h b/include/configs/vl_ma2sc.h
index 14c6e67..bef821f 100644
--- a/include/configs/vl_ma2sc.h
+++ b/include/configs/vl_ma2sc.h
@@ -13,8 +13,6 @@
 
 /*--------------------------------------------------------------------------*/
 
-#define CONFIG_ARM926EJS		/* This is an ARM926EJS Core	*/
-#define CONFIG_AT91FAMILY
 #define CONFIG_AT91SAM9263		/* It's an Atmel AT91SAM9263 SoC*/
 #define CONFIG_VL_MA2SC			/* on an VL_MA2SC Board	*/
 #define CONFIG_ARCH_CPU_INIT
diff --git a/include/configs/woodburn_common.h b/include/configs/woodburn_common.h
index 695bc23..259205e 100644
--- a/include/configs/woodburn_common.h
+++ b/include/configs/woodburn_common.h
@@ -55,7 +55,7 @@
 #define CONFIG_POWER
 #define CONFIG_POWER_I2C
 #define CONFIG_POWER_FSL
-#define CONFIG_PMIC_FSL_MC13892
+#define CONFIG_POWER_FSL_MC13892
 #define CONFIG_SYS_FSL_PMIC_I2C_ADDR	0x8
 #define CONFIG_RTC_MC13XXX
 
diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index dc5bc22..fa252c0 100644
--- a/include/configs/zynq-common.h
+++ b/include/configs/zynq-common.h
@@ -225,6 +225,7 @@
 /* FIT support */
 #define CONFIG_FIT
 #define CONFIG_FIT_VERBOSE	1 /* enable fit_format_{error,warning}() */
+#define CONFIG_IMAGE_FORMAT_LEGACY /* enable also legacy image format */
 
 /* FDT support */
 #define CONFIG_OF_CONTROL
author	Stefano Babic <sbabic@denx.de>	2014-07-16 08:51:30 +0200
committer	Stefano Babic <sbabic@denx.de>	2014-07-16 08:51:30 +0200
commit	dab5e3469d294a4e1ffed8407d296a78e02cc01f (patch)
tree	c6378034591210b3142ca3add806d52c6ea22b3b /include/configs
parent	14a1613140519a8d0a88e6054c302a8cb3e067a5 (diff)
parent	524123a70761110c5cf3ccc5f52f6d4da071b959 (diff)
download	u-boot-imx-dab5e3469d294a4e1ffed8407d296a78e02cc01f.zip u-boot-imx-dab5e3469d294a4e1ffed8407d296a78e02cc01f.tar.gz u-boot-imx-dab5e3469d294a4e1ffed8407d296a78e02cc01f.tar.bz2