sh: Add support Renesas Solutions R7780MP

Renesas Solutions R7780MP is a reference board on SH7780.
This board has serial, 10/100 base Ethernet deivice, CF slot
and VGA devices. This board can set extension board.
Extension board has 10/100/1000 base Ethernet device, PCI slot,
S-ATA, iDVR slot.

Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

1 files changed, 164 insertions, 0 deletions

diff --git a/include/configs/r7780mp.h b/include/configs/r7780mp.h
new file mode 100644
index 0000000..3ddb2f4
--- /dev/null
+++ b/include/configs/r7780mp.h
@@ -0,0 +1,164 @@
+/*
+ * Configuation settings for the Renesas R7780MP board
+ *
+ * Copyright (C) 2007 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ * Copyright (C) 2008 Yusuke Goda <goda.yusuke@renesas.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __R7780RP_H
+#define __R7780RP_H
+
+#undef DEBUG
+#define CONFIG_SH		1
+#define CONFIG_SH4A		1
+#define CONFIG_CPU_SH7780	1
+#define CONFIG_R7780MP		1
+#define __LITTLE_ENDIAN 1
+
+/*
+ * Command line configuration.
+ */
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_EXT2
+#define CONFIG_DOS_PARTITION
+
+#define CFG_SCIF_CONSOLE	1
+#define CONFIG_BAUDRATE		115200
+#define CONFIG_CONS_SCIF0	1
+
+#define CONFIG_BOOTDELAY	3
+#define CONFIG_BOOTARGS		"console=ttySC0,115200"
+#define CONFIG_ENV_OVERWRITE	1
+
+/* check for keypress on bootdelay==0 */
+/*#define CONFIG_ZERO_BOOTDELAY_CHECK*/
+
+/* Network setting */
+#define CONFIG_NETMASK		255.0.0.0
+#define CONFIG_IPADDR		10.0.192.82
+#define CONFIG_SERVERIP		10.0.0.1
+#define CONFIG_GATEWAYIP	10.0.0.1
+
+#define CFG_SDRAM_BASE		(0x08000000)
+#define CFG_SDRAM_SIZE		(128 * 1024 * 1024)
+
+#define CFG_LONGHELP
+#define CFG_PROMPT		"=> "
+#define CFG_CBSIZE		256
+#define CFG_PBSIZE		256
+#define CFG_MAXARGS		16
+#define CFG_BARGSIZE	512
+/* List of legal baudrate settings for this board */
+#define CFG_BAUDRATE_TABLE	{ 115200, 57600, 38400, 19200, 9600 }
+
+#define CFG_MEMTEST_START	(CFG_SDRAM_BASE)
+#define CFG_MEMTEST_END		(TEXT_BASE - 0x100000)
+
+/* NOR Flash (S29PL127J60TFI130) */
+#define CFG_FLASH_BASE		(0xA0000000)
+#define CFG_FLASH_CFI_WIDTH FLASH_CFI_32BIT
+#define CFG_MAX_FLASH_BANKS (2)
+#define CFG_MAX_FLASH_SECT  270
+#define CFG_FLASH_BANKS_LIST    { CFG_FLASH_BASE,\
+				CFG_FLASH_BASE + 0x100000,\
+				CFG_FLASH_BASE + 0x400000,\
+				CFG_FLASH_BASE + 0x700000, }
+
+#define CFG_LOAD_ADDR		(CFG_SDRAM_BASE + 4 * 1024 * 1024)
+/* Address of u-boot image in Flash */
+#define CFG_MONITOR_BASE	(CFG_FLASH_BASE)
+#define CFG_MONITOR_LEN		(112 * 1024)
+/* Size of DRAM reserved for malloc() use */
+#define CFG_MALLOC_LEN		(256 * 1024)
+
+/* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_SIZE	(256)
+#define CFG_BOOTMAPSZ		(8 * 1024 * 1024)
+#define CFG_RX_ETH_BUFFER	(8)
+
+#define CFG_FLASH_CFI
+#define CFG_FLASH_CFI_DRIVER
+#undef CFG_FLASH_CFI_BROKEN_TABLE
+#undef  CFG_FLASH_QUIET_TEST
+/* print 'E' for empty sector on flinfo */
+#define CFG_FLASH_EMPTY_INFO
+
+#define CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_SECT_SIZE	(16 * 1024)
+#define CFG_ENV_SIZE		(CFG_ENV_SECT_SIZE)
+#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+#define CFG_FLASH_ERASE_TOUT  	120000
+#define CFG_FLASH_WRITE_TOUT	500
+
+/* Board Clock */
+#define CONFIG_SYS_CLK_FREQ	33333333
+#define TMU_CLK_DIVIDER		4
+#define CFG_HZ	(CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
+
+/* PCI Controller */
+#if defined(CONFIG_CMD_PCI)
+#define CONFIG_PCI
+#define CONFIG_SH4_PCI
+#define CONFIG_PCI_PNP
+#define CONFIG_PCI_SCAN_SHOW	1
+#define __io
+#define __mem_pci
+
+#define CONFIG_PCI_MEM_BUS	0xFD000000	/* Memory space base addr */
+#define CONFIG_PCI_MEM_PHYS	CONFIG_PCI_MEM_BUS
+#define CONFIG_PCI_MEM_SIZE	0x01000000	/* Size of Memory window */
+
+#define CONFIG_PCI_IO_BUS	0xFE200000	/* IO space base address */
+#define CONFIG_PCI_IO_PHYS	CONFIG_PCI_IO_BUS
+#define CONFIG_PCI_IO_SIZE	0x00200000	/* Size of IO window */
+#endif /* CONFIG_CMD_PCI */
+
+#if defined(CONFIG_CMD_NET)
+/* #define CONFIG_NET_MULTI
+   #define CONFIG_RTL8169 */
+/* AX88696L Support(NE2000 base chip) */
+#define CONFIG_DRIVER_NE2000
+#define CONFIG_DRIVER_AX88796L
+#define CONFIG_DRIVER_NE2000_BASE	0xA4100000
+#endif
+
+/* Compact flash Support */
+#if defined(CONFIG_CMD_IDE)
+#define CONFIG_IDE_RESET        1
+#define CFG_PIO_MODE            1
+#define CFG_IDE_MAXBUS          1   /* IDE bus */
+#define CFG_IDE_MAXDEVICE       1
+#define CFG_ATA_BASE_ADDR       0xb4000000
+#define CFG_ATA_STRIDE          2               /* 1bit shift */
+#define CFG_ATA_DATA_OFFSET     0x1000          /* data reg offset */
+#define CFG_ATA_REG_OFFSET      0x1000          /* reg offset */
+#define CFG_ATA_ALT_OFFSET      0x800           /* alternate register offset */
+#endif /* CONFIG_CMD_IDE */
+
+#endif /* __R7780RP_H */