powerpc: mpc83xx: remove MPC8360ERDK, EMPC8360EMDS support

These boards are still non-generic boards.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Dave Liu <daveliu@freescale.com>
Cc: Anton Vorontsov <avorontsov@ru.mvista.com>

2 files changed, 0 insertions, 1355 deletions

diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h
deleted file mode 100644
index aefde74..0000000
--- a/include/configs/MPC8360EMDS.h
+++ /dev/null
@@ -1,735 +0,0 @@
-/*
- * Copyright (C) 2006,2011 Freescale Semiconductor, Inc.
- *
- * Dave Liu <daveliu@freescale.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- */
-#define CONFIG_E300		1 /* E300 family */
-#define CONFIG_QE		1 /* Has QE */
-#define CONFIG_MPC8360		1 /* MPC8360 CPU specific */
-#define CONFIG_MPC8360EMDS	1 /* MPC8360EMDS board specific */
-
-#define	CONFIG_SYS_TEXT_BASE	0xFE000000
-
-#undef CONFIG_PQ_MDS_PIB /* POWERQUICC MDS Platform IO Board */
-#undef CONFIG_PQ_MDS_PIB_ATM /* QOC3 ATM card */
-
-/*
- * System Clock Setup
- */
-#ifdef CONFIG_CLKIN_33MHZ
-#ifdef CONFIG_PCISLAVE
-#define CONFIG_83XX_PCICLK	33330000 /* in HZ */
-#else
-#define CONFIG_83XX_CLKIN	33330000 /* in Hz */
-#endif
-
-#ifndef CONFIG_SYS_CLK_FREQ
-#define CONFIG_SYS_CLK_FREQ	33330000
-#endif
-
-#elif defined(CONFIG_CLKIN_66MHZ)
-#ifdef CONFIG_PCISLAVE
-#define CONFIG_83XX_PCICLK	66000000 /* in HZ */
-#else
-#define CONFIG_83XX_CLKIN	66000000 /* in Hz */
-#endif
-
-#ifndef CONFIG_SYS_CLK_FREQ
-#define CONFIG_SYS_CLK_FREQ	66000000
-#endif
-#else
-#error Unknown oscillator frequency.
-#endif
-
-/*
- * Hardware Reset Configuration Word
- */
-#ifdef CONFIG_CLKIN_33MHZ
-#define CONFIG_SYS_HRCW_LOW (\
-	HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
-	HRCWL_DDR_TO_SCB_CLK_1X1 |\
-	HRCWL_CSB_TO_CLKIN_8X1 |\
-	HRCWL_VCO_1X2 |\
-	HRCWL_CE_PLL_VCO_DIV_4 |\
-	HRCWL_CE_PLL_DIV_1X1 |\
-	HRCWL_CE_TO_PLL_1X15 |\
-	HRCWL_CORE_TO_CSB_2X1)
-#elif defined(CONFIG_CLKIN_66MHZ)
-#define CONFIG_SYS_HRCW_LOW (\
-	HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
-	HRCWL_DDR_TO_SCB_CLK_1X1 |\
-	HRCWL_CSB_TO_CLKIN_4X1 |\
-	HRCWL_VCO_1X2 |\
-	HRCWL_CE_PLL_VCO_DIV_4 |\
-	HRCWL_CE_PLL_DIV_1X1 |\
-	HRCWL_CE_TO_PLL_1X6 |\
-	HRCWL_CORE_TO_CSB_2X1)
-#endif
-
-#ifdef CONFIG_PCISLAVE
-#define CONFIG_SYS_HRCW_HIGH (\
-	HRCWH_PCI_AGENT |\
-	HRCWH_PCI1_ARBITER_DISABLE |\
-	HRCWH_PCICKDRV_DISABLE |\
-	HRCWH_CORE_ENABLE |\
-	HRCWH_FROM_0XFFF00100 |\
-	HRCWH_BOOTSEQ_DISABLE |\
-	HRCWH_SW_WATCHDOG_DISABLE |\
-	HRCWH_ROM_LOC_LOCAL_16BIT)
-#else
-#define CONFIG_SYS_HRCW_HIGH (\
-	HRCWH_PCI_HOST |\
-	HRCWH_PCI1_ARBITER_ENABLE |\
-	HRCWH_PCICKDRV_ENABLE |\
-	HRCWH_CORE_ENABLE |\
-	HRCWH_FROM_0X00000100 |\
-	HRCWH_BOOTSEQ_DISABLE |\
-	HRCWH_SW_WATCHDOG_DISABLE |\
-	HRCWH_ROM_LOC_LOCAL_16BIT)
-#endif
-
-/*
- * System IO Config
- */
-#define CONFIG_SYS_SICRH		0x00000000
-#define CONFIG_SYS_SICRL		0x40000000
-
-#define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */
-#define CONFIG_BOARD_EARLY_INIT_R
-
-/*
- * IMMR new address
- */
-#define CONFIG_SYS_IMMR		0xE0000000
-
-/*
- * DDR Setup
- */
-#define CONFIG_SYS_DDR_BASE	0x00000000 /* DDR is system memory */
-#define CONFIG_SYS_SDRAM_BASE	CONFIG_SYS_DDR_BASE
-				/* + 256M */
-#define CONFIG_SYS_SDRAM_BASE2	(CONFIG_SYS_SDRAM_BASE + 0x10000000)
-#define CONFIG_SYS_DDR_SDRAM_BASE	CONFIG_SYS_DDR_BASE
-#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL	(DDR_SDRAM_CLK_CNTL_SS_EN \
-					| DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05)
-
-#define CONFIG_SYS_83XX_DDR_USES_CS0
-
-#define CONFIG_DDR_ECC		/* support DDR ECC function */
-#define CONFIG_DDR_ECC_CMD	/* Use DDR ECC user commands */
-
-/*
- * DDRCDR - DDR Control Driver Register
- */
-#define CONFIG_SYS_DDRCDR_VALUE	0x80080001
-
-#define CONFIG_SPD_EEPROM	/* Use SPD EEPROM for DDR setup */
-#if defined(CONFIG_SPD_EEPROM)
-/*
- * Determine DDR configuration from I2C interface.
- */
-#define SPD_EEPROM_ADDRESS	0x52 /* DDR SODIMM */
-#else
-/*
- * Manually set up DDR parameters
- */
-#define CONFIG_SYS_DDR_SIZE		256 /* MB */
-#if defined(CONFIG_DDR_II)
-#define CONFIG_SYS_DDRCDR		0x80080001
-#define CONFIG_SYS_DDR_CS0_BNDS		0x0000000f
-#define CONFIG_SYS_DDR_CS0_CONFIG	0x80330102
-#define CONFIG_SYS_DDR_TIMING_0		0x00220802
-#define CONFIG_SYS_DDR_TIMING_1		0x38357322
-#define CONFIG_SYS_DDR_TIMING_2		0x2f9048c8
-#define CONFIG_SYS_DDR_TIMING_3		0x00000000
-#define CONFIG_SYS_DDR_CLK_CNTL		0x02000000
-#define CONFIG_SYS_DDR_MODE		0x47d00432
-#define CONFIG_SYS_DDR_MODE2		0x8000c000
-#define CONFIG_SYS_DDR_INTERVAL		0x03cf0080
-#define CONFIG_SYS_DDR_SDRAM_CFG	0x43000000
-#define CONFIG_SYS_DDR_SDRAM_CFG2	0x00401000
-#else
-#define CONFIG_SYS_DDR_CS0_CONFIG	(CSCONFIG_EN \
-					| CSCONFIG_ROW_BIT_13 \
-					| CSCONFIG_COL_BIT_9)
-#define CONFIG_SYS_DDR_CS1_CONFIG	CONFIG_SYS_DDR_CS0_CONFIG
-#define CONFIG_SYS_DDR_TIMING_1	0x37344321 /* tCL-tRCD-tRP-tRAS=2.5-3-3-7 */
-#define CONFIG_SYS_DDR_TIMING_2	0x00000800 /* may need tuning */
-#define CONFIG_SYS_DDR_CONTROL	0x42008000 /* Self refresh,2T timing */
-#define CONFIG_SYS_DDR_MODE	0x20000162 /* DLL,normal,seq,4/2.5 */
-#define CONFIG_SYS_DDR_INTERVAL	0x045b0100 /* page mode */
-#endif
-#endif
-
-/*
- * Memory test
- */
-#undef CONFIG_SYS_DRAM_TEST		/* memory test, takes time */
-#define CONFIG_SYS_MEMTEST_START	0x00000000 /* memtest region */
-#define CONFIG_SYS_MEMTEST_END		0x00100000
-
-/*
- * The reserved memory
- */
-
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE /* start of monitor */
-
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-#define CONFIG_SYS_RAMBOOT
-#else
-#undef	CONFIG_SYS_RAMBOOT
-#endif
-
-/* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
-#define CONFIG_SYS_MONITOR_LEN	(384 * 1024) /* Reserve 384 kB for Mon */
-#define CONFIG_SYS_MALLOC_LEN	(256 * 1024) /* Reserved for malloc */
-
-/*
- * Initial RAM Base Address Setup
- */
-#define CONFIG_SYS_INIT_RAM_LOCK	1
-#define CONFIG_SYS_INIT_RAM_ADDR	0xE6000000 /* Initial RAM address */
-#define CONFIG_SYS_INIT_RAM_SIZE	0x1000 /* Size of used area in RAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET	\
-			(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-
-/*
- * Local Bus Configuration & Clock Setup
- */
-#define CONFIG_SYS_LCRR_DBYP	LCRR_DBYP
-#define CONFIG_SYS_LCRR_CLKDIV	LCRR_CLKDIV_4
-#define CONFIG_SYS_LBC_LBCR	0x00000000
-
-/*
- * FLASH on the Local Bus
- */
-#define CONFIG_SYS_FLASH_CFI		/* use the Common Flash Interface */
-#define CONFIG_FLASH_CFI_DRIVER		/* use the CFI driver */
-#define CONFIG_SYS_FLASH_BASE		0xFE000000 /* FLASH base address */
-#define CONFIG_SYS_FLASH_SIZE		32 /* max FLASH size is 32M */
-#define CONFIG_SYS_FLASH_PROTECTION	1 /* Use h/w Flash protection. */
-#define CONFIG_FLASH_SHOW_PROGRESS	45 /* count down from 45/5: 9..1 */
-
-					/* Window base at flash base */
-#define CONFIG_SYS_LBLAWBAR0_PRELIM	CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_LBLAWAR0_PRELIM	(LBLAWAR_EN | LBLAWAR_32MB)
-
-#define CONFIG_SYS_BR0_PRELIM	(CONFIG_SYS_FLASH_BASE \
-				| BR_PS_16	/* 16 bit port */ \
-				| BR_MS_GPCM	/* MSEL = GPCM */ \
-				| BR_V)		/* valid */
-#define CONFIG_SYS_OR0_PRELIM	(MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \
-				| OR_GPCM_XAM \
-				| OR_GPCM_CSNT \
-				| OR_GPCM_ACS_DIV2 \
-				| OR_GPCM_XACS \
-				| OR_GPCM_SCY_15 \
-				| OR_GPCM_TRLX_SET \
-				| OR_GPCM_EHTR_SET \
-				| OR_GPCM_EAD)
-
-#define CONFIG_SYS_MAX_FLASH_BANKS	1 /* number of banks */
-#define CONFIG_SYS_MAX_FLASH_SECT	256 /* max sectors per device */
-
-#undef	CONFIG_SYS_FLASH_CHECKSUM
-
-/*
- * BCSR on the Local Bus
- */
-#define CONFIG_SYS_BCSR			0xF8000000
-					/* Access window base at BCSR base */
-#define CONFIG_SYS_LBLAWBAR1_PRELIM	CONFIG_SYS_BCSR
-#define CONFIG_SYS_LBLAWAR1_PRELIM	(LBLAWAR_EN | LBLAWAR_64KB)
-
-#define CONFIG_SYS_BR1_PRELIM	(CONFIG_SYS_BCSR \
-				| BR_PS_8 \
-				| BR_MS_GPCM \
-				| BR_V)
-#define CONFIG_SYS_OR1_PRELIM	(OR_AM_32KB \
-				| OR_GPCM_XAM \
-				| OR_GPCM_CSNT \
-				| OR_GPCM_XACS \
-				| OR_GPCM_SCY_15 \
-				| OR_GPCM_TRLX_SET \
-				| OR_GPCM_EHTR_SET \
-				| OR_GPCM_EAD)
-				/* 0xFFFFE9F7 */
-
-/*
- * SDRAM on the Local Bus
- */
-#define CONFIG_SYS_LBC_SDRAM_BASE	0xF0000000	/* SDRAM base address */
-#define CONFIG_SYS_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB */
-
-#define CONFIG_SYS_LB_SDRAM		/* if board has SRDAM on local bus */
-
-#ifdef CONFIG_SYS_LB_SDRAM
-#define CONFIG_SYS_LBLAWBAR2		0
-#define CONFIG_SYS_LBLAWAR2		(LBLAWAR_EN | LBLAWAR_64MB)
-
-/*local bus BR2, OR2 definition for SDRAM if soldered on the EPB board */
-/*
- * Base Register 2 and Option Register 2 configure SDRAM.
- *
- * For BR2, need:
- *    Base address = BR[0:16] = dynamic
- *    port size = 32-bits = BR2[19:20] = 11
- *    no parity checking = BR2[21:22] = 00
- *    SDRAM for MSEL = BR2[24:26] = 011
- *    Valid = BR[31] = 1
- *
- * 0	4    8	  12   16   20	 24   28
- * xxxx xxxx xxxx xxxx x001 1000 0110 0001 = 00001861
- */
-
-/* Port size=32bit, MSEL=DRAM */
-#define CONFIG_SYS_BR2	(BR_PS_32 | BR_MS_SDRAM | BR_V) /* 0xF0001861 */
-
-/*
- * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64.
- *
- * For OR2, need:
- *    64MB mask for AM, OR2[0:7] = 1111 1100
- *		   XAM, OR2[17:18] = 11
- *    9 columns OR2[19-21] = 010
- *    13 rows	OR2[23-25] = 100
- *    EAD set for extra time OR[31] = 1
- *
- * 0	4    8	  12   16   20	 24   28
- * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901
- */
-
-#define CONFIG_SYS_OR2	(MEG_TO_AM(CONFIG_SYS_LBC_SDRAM_SIZE) \
-			| OR_SDRAM_XAM \
-			| ((9 - OR_SDRAM_MIN_COLS) << OR_SDRAM_COLS_SHIFT) \
-			| ((13 - OR_SDRAM_MIN_ROWS) << OR_SDRAM_ROWS_SHIFT) \
-			| OR_SDRAM_EAD)
-			/* 0xFC006901 */
-
-				/* LB sdram refresh timer, about 6us */
-#define CONFIG_SYS_LBC_LSRT	0x32000000
-				/* LB refresh timer prescal, 266MHz/32 */
-#define CONFIG_SYS_LBC_MRTPR	0x20000000
-
-#define CONFIG_SYS_LBC_LSDMR_COMMON	0x0063b723
-
-/*
- * SDRAM Controller configuration sequence.
- */
-#define CONFIG_SYS_LBC_LSDMR_1	(CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_PCHALL)
-#define CONFIG_SYS_LBC_LSDMR_2	(CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_ARFRSH)
-#define CONFIG_SYS_LBC_LSDMR_3	(CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_ARFRSH)
-#define CONFIG_SYS_LBC_LSDMR_4	(CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_MRW)
-#define CONFIG_SYS_LBC_LSDMR_5	(CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_NORMAL)
-
-#endif
-
-/*
- * Windows to access Platform I/O Boards (PIB) via local bus
- */
-#define CONFIG_SYS_PIB_BASE		0xF8008000
-#define CONFIG_SYS_PIB_WINDOW_SIZE	(32 * 1024)
-
-/* [RFC] This LBLAW only covers the 2nd window (CS5) */
-#define CONFIG_SYS_LBLAWBAR3_PRELIM	\
-			CONFIG_SYS_PIB_BASE + CONFIG_SYS_PIB_WINDOW_SIZE
-#define CONFIG_SYS_LBLAWAR3_PRELIM	(LBLAWAR_EN | LBLAWAR_32KB)
-
-/*
- * CS4 on Local Bus, to PIB
- */
-				/* CS4 base address at 0xf8008000 */
-#define CONFIG_SYS_BR4_PRELIM	(CONFIG_SYS_PIB_BASE \
-				| BR_PS_8 \
-				| BR_MS_GPCM \
-				| BR_V)
-				/* 0xF8008801 */
-#define CONFIG_SYS_OR4_PRELIM	(OR_AM_32KB \
-				| OR_GPCM_XAM \
-				| OR_GPCM_CSNT \
-				| OR_GPCM_XACS \
-				| OR_GPCM_SCY_15 \
-				| OR_GPCM_TRLX_SET \
-				| OR_GPCM_EHTR_SET \
-				| OR_GPCM_EAD)
-				/* 0xffffe9f7 */
-
-/*
- * CS5 on Local Bus, to PIB
- */
-				/* CS5 base address at 0xf8010000 */
-#define CONFIG_SYS_BR5_PRELIM	((CONFIG_SYS_PIB_BASE + \
-						CONFIG_SYS_PIB_WINDOW_SIZE) \
-				| BR_PS_8 \
-				| BR_MS_GPCM \
-				| BR_V)
-				/* 0xF8010801 */
-#define CONFIG_SYS_OR5_PRELIM	(CONFIG_SYS_PIB_BASE \
-				| OR_GPCM_XAM \
-				| OR_GPCM_CSNT \
-				| OR_GPCM_XACS \
-				| OR_GPCM_SCY_15 \
-				| OR_GPCM_TRLX_SET \
-				| OR_GPCM_EHTR_SET \
-				| OR_GPCM_EAD)
-				/* 0xffffe9f7 */
-
-/*
- * Serial Port
- */
-#define CONFIG_CONS_INDEX	1
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	1
-#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
-
-#define CONFIG_SYS_BAUDRATE_TABLE  \
-		{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
-
-#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_IMMR+0x4500)
-#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_IMMR+0x4600)
-
-#define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
-#define CONFIG_AUTO_COMPLETE		/* add autocompletion support   */
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-
-/* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT	1
-#define CONFIG_OF_BOARD_SETUP	1
-#define CONFIG_OF_STDOUT_VIA_ALIAS	1
-
-/* I2C */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_FSL
-#define CONFIG_SYS_FSL_I2C_SPEED	400000
-#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
-#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x52} }
-
-/*
- * Config on-board RTC
- */
-#define CONFIG_RTC_DS1374		/* use ds1374 rtc via i2c */
-#define CONFIG_SYS_I2C_RTC_ADDR	0x68	/* at address 0x68 */
-
-/*
- * General PCI
- * Addresses are mapped 1-1.
- */
-#define CONFIG_SYS_PCI1_MEM_BASE	0x80000000
-#define CONFIG_SYS_PCI1_MEM_PHYS	CONFIG_SYS_PCI1_MEM_BASE
-#define CONFIG_SYS_PCI1_MEM_SIZE	0x10000000 /* 256M */
-#define CONFIG_SYS_PCI1_MMIO_BASE	0x90000000
-#define CONFIG_SYS_PCI1_MMIO_PHYS	CONFIG_SYS_PCI1_MMIO_BASE
-#define CONFIG_SYS_PCI1_MMIO_SIZE	0x10000000 /* 256M */
-#define CONFIG_SYS_PCI1_IO_BASE		0x00000000
-#define CONFIG_SYS_PCI1_IO_PHYS		0xE0300000
-#define CONFIG_SYS_PCI1_IO_SIZE		0x100000 /* 1M */
-
-#define CONFIG_SYS_PCI_SLV_MEM_LOCAL	CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_PCI_SLV_MEM_BUS	0x00000000
-#define CONFIG_SYS_PCI_SLV_MEM_SIZE	0x80000000
-
-
-#ifdef CONFIG_PCI
-#define CONFIG_PCI_INDIRECT_BRIDGE
-
-#define CONFIG_PCI_PNP		/* do pci plug-and-play */
-#define CONFIG_83XX_PCI_STREAMING
-
-#undef CONFIG_EEPRO100
-#undef CONFIG_PCI_SCAN_SHOW	/* show pci devices on startup */
-#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957	/* Freescale */
-
-#endif	/* CONFIG_PCI */
-
-
-#define CONFIG_HWCONFIG		1
-
-/*
- * QE UEC ethernet configuration
- */
-#define CONFIG_UEC_ETH
-#define CONFIG_ETHPRIME		"UEC0"
-#define CONFIG_PHY_MODE_NEED_CHANGE
-
-#define CONFIG_UEC_ETH1		/* GETH1 */
-
-#ifdef CONFIG_UEC_ETH1
-#define CONFIG_SYS_UEC1_UCC_NUM	0	/* UCC1 */
-#define CONFIG_SYS_UEC1_RX_CLK		QE_CLK_NONE
-#define CONFIG_SYS_UEC1_TX_CLK		QE_CLK9
-#define CONFIG_SYS_UEC1_ETH_TYPE	GIGA_ETH
-#define CONFIG_SYS_UEC1_PHY_ADDR	0
-#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID
-#define CONFIG_SYS_UEC1_INTERFACE_SPEED 1000
-#endif
-
-#define CONFIG_UEC_ETH2		/* GETH2 */
-
-#ifdef CONFIG_UEC_ETH2
-#define CONFIG_SYS_UEC2_UCC_NUM	1	/* UCC2 */
-#define CONFIG_SYS_UEC2_RX_CLK		QE_CLK_NONE
-#define CONFIG_SYS_UEC2_TX_CLK		QE_CLK4
-#define CONFIG_SYS_UEC2_ETH_TYPE	GIGA_ETH
-#define CONFIG_SYS_UEC2_PHY_ADDR	1
-#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID
-#define CONFIG_SYS_UEC2_INTERFACE_SPEED 1000
-#endif
-
-/*
- * Environment
- */
-
-#ifndef CONFIG_SYS_RAMBOOT
-	#define CONFIG_ENV_IS_IN_FLASH	1
-	#define CONFIG_ENV_ADDR		\
-			(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
-	#define CONFIG_ENV_SECT_SIZE	0x20000
-	#define CONFIG_ENV_SIZE		0x2000
-#else
-	#define CONFIG_SYS_NO_FLASH	1	/* Flash is not usable now */
-	#define CONFIG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
-	#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - 0x1000)
-	#define CONFIG_ENV_SIZE		0x2000
-#endif
-
-#define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_SDRAM
-
-#if defined(CONFIG_PCI)
-    #define CONFIG_CMD_PCI
-#endif
-
-#if defined(CONFIG_SYS_RAMBOOT)
-    #undef CONFIG_CMD_SAVEENV
-    #undef CONFIG_CMD_LOADS
-#endif
-
-
-#undef CONFIG_WATCHDOG		/* watchdog disabled */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP		/* undef to save memory */
-#define CONFIG_SYS_LOAD_ADDR		0x2000000 /* default load address */
-
-#if defined(CONFIG_CMD_KGDB)
-	#define CONFIG_SYS_CBSIZE	1024 /* Console I/O Buffer Size */
-#else
-	#define CONFIG_SYS_CBSIZE	256 /* Console I/O Buffer Size */
-#endif
-
-				/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-#define CONFIG_SYS_MAXARGS	16	/* max number of command args */
-				/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 256 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ	(256 << 20) /* Initial Memory map for Linux */
-
-/*
- * Core HID Setup
- */
-#define CONFIG_SYS_HID0_INIT	0x000000000
-#define CONFIG_SYS_HID0_FINAL	(HID0_ENABLE_MACHINE_CHECK | \
-				 HID0_ENABLE_INSTRUCTION_CACHE)
-#define CONFIG_SYS_HID2		HID2_HBE
-
-/*
- * MMU Setup
- */
-
-#define CONFIG_HIGH_BATS	1	/* High BATs supported */
-#define CONFIG_BAT_RW
-
-/* DDR/LBC SDRAM: cacheable */
-#define CONFIG_SYS_IBAT0L	(CONFIG_SYS_SDRAM_BASE \
-				| BATL_PP_RW \
-				| BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT0U	(CONFIG_SYS_SDRAM_BASE \
-				| BATU_BL_256M \
-				| BATU_VS \
-				| BATU_VP)
-#define CONFIG_SYS_DBAT0L	CONFIG_SYS_IBAT0L
-#define CONFIG_SYS_DBAT0U	CONFIG_SYS_IBAT0U
-
-/* IMMRBAR & PCI IO: cache-inhibit and guarded */
-#define CONFIG_SYS_IBAT1L	(CONFIG_SYS_IMMR \
-				| BATL_PP_RW \
-				| BATL_CACHEINHIBIT \
-				| BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_IBAT1U	(CONFIG_SYS_IMMR \
-				| BATU_BL_4M \
-				| BATU_VS \
-				| BATU_VP)
-#define CONFIG_SYS_DBAT1L	CONFIG_SYS_IBAT1L
-#define CONFIG_SYS_DBAT1U	CONFIG_SYS_IBAT1U
-
-/* BCSR: cache-inhibit and guarded */
-#define CONFIG_SYS_IBAT2L	(CONFIG_SYS_BCSR \
-				| BATL_PP_RW \
-				| BATL_CACHEINHIBIT \
-				| BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_IBAT2U	(CONFIG_SYS_BCSR \
-				| BATU_BL_128K \
-				| BATU_VS \
-				| BATU_VP)
-#define CONFIG_SYS_DBAT2L	CONFIG_SYS_IBAT2L
-#define CONFIG_SYS_DBAT2U	CONFIG_SYS_IBAT2U
-
-/* FLASH: icache cacheable, but dcache-inhibit and guarded */
-#define CONFIG_SYS_IBAT3L	(CONFIG_SYS_FLASH_BASE \
-				| BATL_PP_RW \
-				| BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT3U	(CONFIG_SYS_FLASH_BASE \
-				| BATU_BL_32M \
-				| BATU_VS \
-				| BATU_VP)
-#define CONFIG_SYS_DBAT3L	(CONFIG_SYS_FLASH_BASE \
-				| BATL_PP_RW \
-				| BATL_CACHEINHIBIT \
-				| BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT3U	CONFIG_SYS_IBAT3U
-
-/* DDR/LBC SDRAM next 256M: cacheable */
-#define CONFIG_SYS_IBAT4L	(CONFIG_SYS_SDRAM_BASE2 \
-				| BATL_PP_RW \
-				| BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT4U	(CONFIG_SYS_SDRAM_BASE2 \
-				| BATU_BL_256M \
-				| BATU_VS \
-				| BATU_VP)
-#define CONFIG_SYS_DBAT4L	CONFIG_SYS_IBAT4L
-#define CONFIG_SYS_DBAT4U	CONFIG_SYS_IBAT4U
-
-/* Stack in dcache: cacheable, no memory coherence */
-#define CONFIG_SYS_IBAT5L	(CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW)
-#define CONFIG_SYS_IBAT5U	(CONFIG_SYS_INIT_RAM_ADDR \
-				| BATU_BL_128K \
-				| BATU_VS \
-				| BATU_VP)
-#define CONFIG_SYS_DBAT5L	CONFIG_SYS_IBAT5L
-#define CONFIG_SYS_DBAT5U	CONFIG_SYS_IBAT5U
-
-#ifdef CONFIG_PCI
-/* PCI MEM space: cacheable */
-#define CONFIG_SYS_IBAT6L	(CONFIG_SYS_PCI1_MEM_PHYS \
-				| BATL_PP_RW \
-				| BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT6U	(CONFIG_SYS_PCI1_MEM_PHYS \
-				| BATU_BL_256M \
-				| BATU_VS \
-				| BATU_VP)
-#define CONFIG_SYS_DBAT6L	CONFIG_SYS_IBAT6L
-#define CONFIG_SYS_DBAT6U	CONFIG_SYS_IBAT6U
-/* PCI MMIO space: cache-inhibit and guarded */
-#define CONFIG_SYS_IBAT7L	(CONFIG_SYS_PCI1_MMIO_PHYS \
-				| BATL_PP_RW \
-				| BATL_CACHEINHIBIT \
-				| BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_IBAT7U	(CONFIG_SYS_PCI1_MMIO_PHYS \
-				| BATU_BL_256M \
-				| BATU_VS \
-				| BATU_VP)
-#define CONFIG_SYS_DBAT7L	CONFIG_SYS_IBAT7L
-#define CONFIG_SYS_DBAT7U	CONFIG_SYS_IBAT7U
-#else
-#define CONFIG_SYS_IBAT6L	(0)
-#define CONFIG_SYS_IBAT6U	(0)
-#define CONFIG_SYS_IBAT7L	(0)
-#define CONFIG_SYS_IBAT7U	(0)
-#define CONFIG_SYS_DBAT6L	CONFIG_SYS_IBAT6L
-#define CONFIG_SYS_DBAT6U	CONFIG_SYS_IBAT6U
-#define CONFIG_SYS_DBAT7L	CONFIG_SYS_IBAT7L
-#define CONFIG_SYS_DBAT7U	CONFIG_SYS_IBAT7U
-#endif
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
-#endif
-
-/*
- * Environment Configuration
- */
-
-#define CONFIG_ENV_OVERWRITE
-
-#if defined(CONFIG_UEC_ETH)
-#define CONFIG_HAS_ETH0
-#define CONFIG_HAS_ETH1
-#endif
-
-#define CONFIG_BAUDRATE 115200
-
-#define CONFIG_LOADADDR 800000	/* default location for tftp and bootm */
-
-#define CONFIG_BOOTDELAY 6	/* -1 disables auto-boot */
-#undef	CONFIG_BOOTARGS		/* the boot command will set bootargs */
-
-#define CONFIG_EXTRA_ENV_SETTINGS					\
-	"netdev=eth0\0"							\
-	"consoledev=ttyS0\0"						\
-	"ramdiskaddr=1000000\0"						\
-	"ramdiskfile=ramfs.83xx\0"					\
-	"fdtaddr=780000\0"						\
-	"fdtfile=mpc836x_mds.dtb\0"					\
-	""
-
-#define CONFIG_NFSBOOTCOMMAND						\
-	"setenv bootargs root=/dev/nfs rw "				\
-		"nfsroot=$serverip:$rootpath "				\
-		"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:"	\
-							"$netdev:off "	\
-		"console=$consoledev,$baudrate $othbootargs;"		\
-	"tftp $loadaddr $bootfile;"					\
-	"tftp $fdtaddr $fdtfile;"					\
-	"bootm $loadaddr - $fdtaddr"
-
-#define CONFIG_RAMBOOTCOMMAND						\
-	"setenv bootargs root=/dev/ram rw "				\
-		"console=$consoledev,$baudrate $othbootargs;"		\
-	"tftp $ramdiskaddr $ramdiskfile;"				\
-	"tftp $loadaddr $bootfile;"					\
-	"tftp $fdtaddr $fdtfile;"					\
-	"bootm $loadaddr $ramdiskaddr $fdtaddr"
-
-
-#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
-
-#endif	/* __CONFIG_H */
diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h
deleted file mode 100644
index 1b8bad1..0000000
--- a/include/configs/MPC8360ERDK.h
+++ /dev/null
@@ -1,620 +0,0 @@
-/*
- * Copyright (C) 2006 Freescale Semiconductor, Inc.
- *                    Dave Liu <daveliu@freescale.com>
- *
- * Copyright (C) 2007 Logic Product Development, Inc.
- *                    Peter Barada <peterb@logicpd.com>
- *
- * Copyright (C) 2007 MontaVista Software, Inc.
- *                    Anton Vorontsov <avorontsov@ru.mvista.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- */
-#define CONFIG_E300		1 /* E300 family */
-#define CONFIG_QE		1 /* Has QE */
-#define CONFIG_MPC8360		1 /* MPC8360 CPU specific */
-#define CONFIG_MPC8360ERDK	1 /* MPC8360ERDK board specific */
-
-#define	CONFIG_SYS_TEXT_BASE	0xFF800000
-
-/*
- * System Clock Setup
- */
-#ifdef CONFIG_CLKIN_33MHZ
-#define CONFIG_83XX_CLKIN		33333333
-#define CONFIG_SYS_CLK_FREQ		33333333
-#define CONFIG_PCI_33M				1
-#define HRCWL_CSB_TO_CLKIN_MPC8360ERDK	HRCWL_CSB_TO_CLKIN_10X1
-#else
-#define CONFIG_83XX_CLKIN		66000000
-#define CONFIG_SYS_CLK_FREQ		66000000
-#define CONFIG_PCI_66M				1
-#define HRCWL_CSB_TO_CLKIN_MPC8360ERDK	HRCWL_CSB_TO_CLKIN_5X1
-#endif /* CONFIG_CLKIN_33MHZ */
-
-/*
- * Hardware Reset Configuration Word
- */
-#define CONFIG_SYS_HRCW_LOW (\
-	HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
-	HRCWL_DDR_TO_SCB_CLK_1X1 |\
-	HRCWL_CSB_TO_CLKIN_MPC8360ERDK |\
-	HRCWL_CORE_TO_CSB_2X1 |\
-	HRCWL_CE_TO_PLL_1X15)
-
-#define CONFIG_SYS_HRCW_HIGH (\
-	HRCWH_PCI_HOST |\
-	HRCWH_PCI1_ARBITER_ENABLE |\
-	HRCWH_PCICKDRV_ENABLE |\
-	HRCWH_CORE_ENABLE |\
-	HRCWH_FROM_0X00000100 |\
-	HRCWH_BOOTSEQ_DISABLE |\
-	HRCWH_SW_WATCHDOG_DISABLE |\
-	HRCWH_ROM_LOC_LOCAL_16BIT |\
-	HRCWH_SECONDARY_DDR_DISABLE |\
-	HRCWH_BIG_ENDIAN |\
-	HRCWH_LALE_EARLY)
-
-/*
- * System IO Config
- */
-#define CONFIG_SYS_SICRH		0x00000000
-#define CONFIG_SYS_SICRL		0x40000000
-
-#define CONFIG_BOARD_EARLY_INIT_R
-
-/*
- * IMMR new address
- */
-#define CONFIG_SYS_IMMR		0xE0000000
-
-/*
- * DDR Setup
- */
-#define CONFIG_SYS_DDR_BASE		0x00000000 /* DDR is system memory */
-#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_BASE
-#define CONFIG_SYS_DDR_SDRAM_BASE	CONFIG_SYS_DDR_BASE
-#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL	(DDR_SDRAM_CLK_CNTL_SS_EN \
-					| DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05)
-
-#define CONFIG_SYS_83XX_DDR_USES_CS0
-
-#define CONFIG_DDR_ECC		/* support DDR ECC function */
-#define CONFIG_DDR_ECC_CMD	/* Use DDR ECC user commands */
-
-/*
- * DDRCDR - DDR Control Driver Register
- */
-#define CONFIG_SYS_DDRCDR_VALUE	(DDRCDR_DHC_EN \
-				| DDRCDR_ODT \
-				| DDRCDR_Q_DRN)
-				/* 0x80080001 */
-
-#undef CONFIG_SPD_EEPROM	/* Do not use SPD EEPROM for DDR setup */
-
-/*
- * Manually set up DDR parameters
- */
-#define CONFIG_DDR_II
-#define CONFIG_SYS_DDR_SIZE		256 /* MB */
-#define CONFIG_SYS_DDR_CS0_BNDS		0x0000000f
-#define CONFIG_SYS_DDR_CS0_CONFIG	(CSCONFIG_EN \
-					| CSCONFIG_ROW_BIT_13 \
-					| CSCONFIG_COL_BIT_10 \
-					| CSCONFIG_ODT_WR_ONLY_CURRENT)
-#define CONFIG_SYS_DDR_SDRAM_CFG	(SDRAM_CFG_SDRAM_TYPE_DDR2 \
-					| SDRAM_CFG_ECC_EN)
-#define CONFIG_SYS_DDR_SDRAM_CFG2	0x00001000
-#define CONFIG_SYS_DDR_CLK_CNTL		(DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05)
-#define CONFIG_SYS_DDR_INTERVAL		((256 << SDRAM_INTERVAL_BSTOPRE_SHIFT) \
-					| (1115 << SDRAM_INTERVAL_REFINT_SHIFT))
-#define CONFIG_SYS_DDR_MODE		0x47800432
-#define CONFIG_SYS_DDR_MODE2		0x8000c000
-
-#define CONFIG_SYS_DDR_TIMING_0	((2 << TIMING_CFG0_MRS_CYC_SHIFT) | \
-				 (9 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) | \
-				 (3 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) | \
-				 (3 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) | \
-				 (0 << TIMING_CFG0_WWT_SHIFT) | \
-				 (0 << TIMING_CFG0_RRT_SHIFT) | \
-				 (0 << TIMING_CFG0_WRT_SHIFT) | \
-				 (0 << TIMING_CFG0_RWT_SHIFT))
-
-#define CONFIG_SYS_DDR_TIMING_1	((TIMING_CFG1_CASLAT_30) | \
-				 (2 << TIMING_CFG1_WRTORD_SHIFT) | \
-				 (2 << TIMING_CFG1_ACTTOACT_SHIFT) | \
-				 (3 << TIMING_CFG1_WRREC_SHIFT) | \
-				 (10 << TIMING_CFG1_REFREC_SHIFT) | \
-				 (3 << TIMING_CFG1_ACTTORW_SHIFT) | \
-				 (8 << TIMING_CFG1_ACTTOPRE_SHIFT) | \
-				 (3 << TIMING_CFG1_PRETOACT_SHIFT))
-
-#define CONFIG_SYS_DDR_TIMING_2	((9 << TIMING_CFG2_FOUR_ACT_SHIFT) | \
-				 (4 << TIMING_CFG2_CKE_PLS_SHIFT) | \
-				 (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) | \
-				 (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) | \
-				 (2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) | \
-				 (0 << TIMING_CFG2_ADD_LAT_SHIFT) | \
-				 (0 << TIMING_CFG2_CPO_SHIFT))
-
-#define CONFIG_SYS_DDR_TIMING_3	0x00000000
-
-/*
- * Memory test
- */
-#undef CONFIG_SYS_DRAM_TEST		/* memory test, takes time */
-#define CONFIG_SYS_MEMTEST_START	0x00000000 /* memtest region */
-#define CONFIG_SYS_MEMTEST_END		0x00100000
-
-/*
- * The reserved memory
- */
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE /* start of monitor */
-#define CONFIG_SYS_FLASH_BASE		0xFF800000 /* FLASH base address */
-
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-#define CONFIG_SYS_RAMBOOT
-#else
-#undef	CONFIG_SYS_RAMBOOT
-#endif
-
-#define CONFIG_SYS_MONITOR_LEN	(384 * 1024) /* Reserve 384 kB for Mon */
-#define CONFIG_SYS_MALLOC_LEN	(256 * 1024) /* Reserved for malloc */
-
-/*
- * Initial RAM Base Address Setup
- */
-#define CONFIG_SYS_INIT_RAM_LOCK	1
-#define CONFIG_SYS_INIT_RAM_ADDR	0xE6000000 /* Initial RAM address */
-#define CONFIG_SYS_INIT_RAM_SIZE	0x1000 /* Size of used area in RAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET	\
-			(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-
-/*
- * Local Bus Configuration & Clock Setup
- */
-#define CONFIG_SYS_LCRR_DBYP	LCRR_DBYP
-#define CONFIG_SYS_LCRR_CLKDIV	LCRR_CLKDIV_4
-#define CONFIG_SYS_LBC_LBCR	0x00000000
-
-/*
- * FLASH on the Local Bus
- */
-#define CONFIG_SYS_FLASH_CFI		/* use the Common Flash Interface */
-#define CONFIG_FLASH_CFI_DRIVER		/* use the CFI driver */
-#define CONFIG_SYS_FLASH_SIZE		8 /* max FLASH size is 32M */
-#define CONFIG_SYS_FLASH_PROTECTION	1 /* Use intel Flash protection. */
-
-					/* Window base at flash base */
-#define CONFIG_SYS_LBLAWBAR0_PRELIM	CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_LBLAWAR0_PRELIM	(LBLAWAR_EN | LBLAWAR_32MB)
-
-#define CONFIG_SYS_BR0_PRELIM	(CONFIG_SYS_FLASH_BASE \
-				| BR_PS_16	/* 16 bit port */ \
-				| BR_MS_GPCM	/* MSEL = GPCM */ \
-				| BR_V)		/* valid */
-#define CONFIG_SYS_OR0_PRELIM	(MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \
-				| OR_UPM_XAM \
-				| OR_GPCM_CSNT \
-				| OR_GPCM_ACS_DIV2 \
-				| OR_GPCM_XACS \
-				| OR_GPCM_SCY_15 \
-				| OR_GPCM_TRLX_SET \
-				| OR_GPCM_EHTR_SET \
-				| OR_GPCM_EAD)
-
-#define CONFIG_SYS_MAX_FLASH_BANKS	1 /* number of banks */
-#define CONFIG_SYS_MAX_FLASH_SECT	256 /* max sectors per device */
-
-#undef	CONFIG_SYS_FLASH_CHECKSUM
-
-/*
- * NAND flash on the local bus
- */
-#define CONFIG_SYS_NAND_BASE		0x60000000
-#define CONFIG_CMD_NAND		1
-#define CONFIG_NAND_FSL_UPM	1
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
-
-#define CONFIG_SYS_LBLAWBAR1_PRELIM	CONFIG_SYS_NAND_BASE
-/*
- * [RFC] Comment said 4KB window; code said 256MB window; OR1 says 64MB
- * ... What's correct?
- */
-#define CONFIG_SYS_LBLAWAR1_PRELIM	(LBLAWAR_EN | LBLAWAR_256MB)
-
-/* Port size 8 bit, UPMA */
-#define CONFIG_SYS_BR1_PRELIM		(CONFIG_SYS_NAND_BASE \
-					| BR_PS_8 \
-					| BR_MS_UPMA \
-					| BR_V)
-					/* 0x60000881 */
-#define CONFIG_SYS_OR1_PRELIM		(OR_AM_64MB | OR_UPM_EAD)
-					/* 0xFC000001 */
-
-/*
- * Fujitsu MB86277 (MINT) graphics controller
- */
-#define CONFIG_SYS_VIDEO_BASE		0x70000000
-
-#define CONFIG_SYS_LBLAWBAR2_PRELIM	CONFIG_SYS_VIDEO_BASE
-#define CONFIG_SYS_LBLAWAR2_PRELIM	(LBLAWAR_EN | LBLAWAR_64MB)
-
-/* Port size 32 bit, UPMB */
-#define CONFIG_SYS_BR2_PRELIM	(CONFIG_SYS_VIDEO_BASE \
-				| BR_PS_32 \
-				| BR_MS_UPMB \
-				| BR_V)
-				/* 0x000018a1 */
-#define CONFIG_SYS_OR2_PRELIM	(OR_AM_64MB | OR_UPM_EAD)
-				/* 0xFC000001 */
-
-/*
- * Serial Port
- */
-#define CONFIG_CONS_INDEX	1
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	1
-#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
-
-#define CONFIG_SYS_BAUDRATE_TABLE  \
-		{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
-
-#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_IMMR+0x4500)
-#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_IMMR+0x4600)
-
-#define CONFIG_CMDLINE_EDITING	1	/* add command line history */
-#define CONFIG_AUTO_COMPLETE		/* add autocompletion support */
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-
-/* Pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT	1
-#define CONFIG_OF_BOARD_SETUP	1
-#define CONFIG_OF_STDOUT_VIA_ALIAS
-
-/* I2C */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_FSL
-#define CONFIG_SYS_FSL_I2C_SPEED	400000
-#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
-#define CONFIG_SYS_FSL_I2C2_SPEED	400000
-#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
-#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
-#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x52} }
-
-/*
- * General PCI
- * Addresses are mapped 1-1.
- */
-#define CONFIG_PCI
-
-#define CONFIG_SYS_PCI1_MEM_BASE	0x80000000
-#define CONFIG_SYS_PCI1_MEM_PHYS	CONFIG_SYS_PCI1_MEM_BASE
-#define CONFIG_SYS_PCI1_MEM_SIZE	0x10000000 /* 256M */
-#define CONFIG_SYS_PCI1_MMIO_BASE	0x90000000
-#define CONFIG_SYS_PCI1_MMIO_PHYS	CONFIG_SYS_PCI1_MMIO_BASE
-#define CONFIG_SYS_PCI1_MMIO_SIZE	0x10000000 /* 256M */
-#define CONFIG_SYS_PCI1_IO_BASE		0xE0300000
-#define CONFIG_SYS_PCI1_IO_PHYS		0xE0300000
-#define CONFIG_SYS_PCI1_IO_SIZE		0x100000 /* 1M */
-
-#ifdef CONFIG_PCI
-#define CONFIG_PCI_INDIRECT_BRIDGE
-
-#define CONFIG_PCI_PNP		/* do pci plug-and-play */
-
-#undef CONFIG_EEPRO100
-#undef CONFIG_PCI_SCAN_SHOW	/* show pci devices on startup */
-#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957	/* Freescale */
-
-#endif	/* CONFIG_PCI */
-
-/*
- * QE UEC ethernet configuration
- */
-#define CONFIG_UEC_ETH
-#define CONFIG_ETHPRIME		"UEC0"
-
-#define CONFIG_UEC_ETH1		/* GETH1 */
-
-#ifdef CONFIG_UEC_ETH1
-#define CONFIG_SYS_UEC1_UCC_NUM	0	/* UCC1 */
-#define CONFIG_SYS_UEC1_RX_CLK		QE_CLK_NONE
-#define CONFIG_SYS_UEC1_TX_CLK		QE_CLK9
-#define CONFIG_SYS_UEC1_ETH_TYPE	GIGA_ETH
-#define CONFIG_SYS_UEC1_PHY_ADDR	2
-#define CONFIG_SYS_UEC1_INTERFACE_TYPE	PHY_INTERFACE_MODE_RGMII_RXID
-#define CONFIG_SYS_UEC1_INTERFACE_SPEED	1000
-#endif
-
-#define CONFIG_UEC_ETH2		/* GETH2 */
-
-#ifdef CONFIG_UEC_ETH2
-#define CONFIG_SYS_UEC2_UCC_NUM	1	/* UCC2 */
-#define CONFIG_SYS_UEC2_RX_CLK		QE_CLK_NONE
-#define CONFIG_SYS_UEC2_TX_CLK		QE_CLK4
-#define CONFIG_SYS_UEC2_ETH_TYPE	GIGA_ETH
-#define CONFIG_SYS_UEC2_PHY_ADDR	4
-#define CONFIG_SYS_UEC2_INTERFACE_TYPE	PHY_INTERFACE_MODE_RGMII_RXID
-#define CONFIG_SYS_UEC2_INTERFACE_SPEED	1000
-#endif
-
-/*
- * Environment
- */
-
-#ifndef CONFIG_SYS_RAMBOOT
-#define CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_ADDR	(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
-#define CONFIG_ENV_SECT_SIZE	0x20000 /* 128K(one sector) for env */
-#define CONFIG_ENV_SIZE		0x20000
-#else /* CONFIG_SYS_RAMBOOT */
-#define CONFIG_SYS_NO_FLASH	1	/* Flash is not usable now */
-#define CONFIG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - 0x1000)
-#define CONFIG_ENV_SIZE		0x2000
-#endif /* CONFIG_SYS_RAMBOOT */
-
-#define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DHCP
-
-#if defined(CONFIG_PCI)
-#define CONFIG_CMD_PCI
-#endif
-
-#if defined(CONFIG_SYS_RAMBOOT)
-#undef CONFIG_CMD_SAVEENV
-#undef CONFIG_CMD_LOADS
-#endif
-
-#undef CONFIG_WATCHDOG		/* watchdog disabled */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP		/* undef to save memory */
-#define CONFIG_SYS_LOAD_ADDR		0x2000000 /* default load address */
-
-#if defined(CONFIG_CMD_KGDB)
-	#define CONFIG_SYS_CBSIZE	1024 /* Console I/O Buffer Size */
-#else
-	#define CONFIG_SYS_CBSIZE	256 /* Console I/O Buffer Size */
-#endif
-
-				/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-#define CONFIG_SYS_MAXARGS	16	/* max number of command args */
-				/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 256 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ	(256 << 20) /* Initial Memory map for Linux */
-
-/*
- * Core HID Setup
- */
-#define CONFIG_SYS_HID0_INIT	0x000000000
-#define CONFIG_SYS_HID0_FINAL	(HID0_ENABLE_MACHINE_CHECK | \
-				 HID0_ENABLE_INSTRUCTION_CACHE)
-#define CONFIG_SYS_HID2		HID2_HBE
-
-/*
- * MMU Setup
- */
-
-#define CONFIG_HIGH_BATS	1	/* High BATs supported */
-
-/* DDR: cache cacheable */
-#define CONFIG_SYS_IBAT0L	(CONFIG_SYS_SDRAM_BASE \
-				| BATL_PP_RW \
-				| BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT0U	(CONFIG_SYS_SDRAM_BASE \
-				| BATU_BL_256M \
-				| BATU_VS \
-				| BATU_VP)
-#define CONFIG_SYS_DBAT0L	CONFIG_SYS_IBAT0L
-#define CONFIG_SYS_DBAT0U	CONFIG_SYS_IBAT0U
-
-/* IMMRBAR & PCI IO: cache-inhibit and guarded */
-#define CONFIG_SYS_IBAT1L	(CONFIG_SYS_IMMR \
-				| BATL_PP_RW \
-				| BATL_CACHEINHIBIT \
-				| BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_IBAT1U	(CONFIG_SYS_IMMR \
-				| BATU_BL_4M \
-				| BATU_VS \
-				| BATU_VP)
-#define CONFIG_SYS_DBAT1L	CONFIG_SYS_IBAT1L
-#define CONFIG_SYS_DBAT1U	CONFIG_SYS_IBAT1U
-
-/* NAND: cache-inhibit and guarded */
-#define CONFIG_SYS_IBAT2L	(CONFIG_SYS_NAND_BASE \
-				| BATL_PP_RW \
-				| BATL_CACHEINHIBIT \
-				| BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_IBAT2U	(CONFIG_SYS_NAND_BASE \
-				| BATU_BL_64M \
-				| BATU_VS \
-				| BATU_VP)
-#define CONFIG_SYS_DBAT2L	CONFIG_SYS_IBAT2L
-#define CONFIG_SYS_DBAT2U	CONFIG_SYS_IBAT2U
-
-/* FLASH: icache cacheable, but dcache-inhibit and guarded */
-#define CONFIG_SYS_IBAT3L	(CONFIG_SYS_FLASH_BASE \
-				| BATL_PP_RW \
-				| BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT3U	(CONFIG_SYS_FLASH_BASE \
-				| BATU_BL_32M \
-				| BATU_VS \
-				| BATU_VP)
-#define CONFIG_SYS_DBAT3L	(CONFIG_SYS_FLASH_BASE \
-				| BATL_PP_RW \
-				| BATL_CACHEINHIBIT \
-				| BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT3U	CONFIG_SYS_IBAT3U
-
-/* Stack in dcache: cacheable, no memory coherence */
-#define CONFIG_SYS_IBAT4L	(CONFIG_SYS_INIT_RAM_ADDR \
-				| BATL_PP_RW)
-#define CONFIG_SYS_IBAT4U	(CONFIG_SYS_INIT_RAM_ADDR \
-				| BATU_BL_128K \
-				| BATU_VS \
-				| BATU_VP)
-#define CONFIG_SYS_DBAT4L	CONFIG_SYS_IBAT4L
-#define CONFIG_SYS_DBAT4U	CONFIG_SYS_IBAT4U
-
-#define CONFIG_SYS_IBAT5L	(CONFIG_SYS_VIDEO_BASE \
-				| BATL_PP_RW \
-				| BATL_CACHEINHIBIT \
-				| BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_IBAT5U	(CONFIG_SYS_VIDEO_BASE \
-				| BATU_BL_64M \
-				| BATU_VS \
-				| BATU_VP)
-#define CONFIG_SYS_DBAT5L	CONFIG_SYS_IBAT5L
-#define CONFIG_SYS_DBAT5U	CONFIG_SYS_IBAT5U
-
-#ifdef CONFIG_PCI
-/* PCI MEM space: cacheable */
-#define CONFIG_SYS_IBAT6L	(CONFIG_SYS_PCI1_MEM_PHYS \
-				| BATL_PP_RW \
-				| BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT6U	(CONFIG_SYS_PCI1_MEM_PHYS \
-				| BATU_BL_256M \
-				| BATU_VS \
-				| BATU_VP)
-#define CONFIG_SYS_DBAT6L	CONFIG_SYS_IBAT6L
-#define CONFIG_SYS_DBAT6U	CONFIG_SYS_IBAT6U
-/* PCI MMIO space: cache-inhibit and guarded */
-#define CONFIG_SYS_IBAT7L	(CONFIG_SYS_PCI1_MMIO_PHYS \
-				| BATL_PP_RW \
-				| BATL_CACHEINHIBIT \
-				| BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_IBAT7U	(CONFIG_SYS_PCI1_MMIO_PHYS \
-				| BATU_BL_256M \
-				| BATU_VS \
-				| BATU_VP)
-#define CONFIG_SYS_DBAT7L	CONFIG_SYS_IBAT7L
-#define CONFIG_SYS_DBAT7U	CONFIG_SYS_IBAT7U
-#else /* CONFIG_PCI */
-#define CONFIG_SYS_IBAT6L	(0)
-#define CONFIG_SYS_IBAT6U	(0)
-#define CONFIG_SYS_IBAT7L	(0)
-#define CONFIG_SYS_IBAT7U	(0)
-#define CONFIG_SYS_DBAT6L	CONFIG_SYS_IBAT6L
-#define CONFIG_SYS_DBAT6U	CONFIG_SYS_IBAT6U
-#define CONFIG_SYS_DBAT7L	CONFIG_SYS_IBAT7L
-#define CONFIG_SYS_DBAT7U	CONFIG_SYS_IBAT7U
-#endif /* CONFIG_PCI */
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
-#endif
-
-/*
- * Environment Configuration
- */
-#define CONFIG_ENV_OVERWRITE
-
-#if defined(CONFIG_UEC_ETH)
-#define CONFIG_HAS_ETH0
-#define CONFIG_HAS_ETH1
-#define CONFIG_HAS_ETH2
-#define CONFIG_HAS_ETH3
-#endif
-
-#define CONFIG_BAUDRATE 115200
-
-#define CONFIG_LOADADDR	a00000
-#define CONFIG_HOSTNAME	mpc8360erdk
-#define CONFIG_BOOTFILE	"uImage"
-
-#define CONFIG_ROOTPATH		"/nfsroot/"
-
-#define	CONFIG_BOOTDELAY 2	/* -1 disables auto-boot */
-#undef	CONFIG_BOOTARGS		/* the boot command will set bootargs */
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	"netdev=eth0\0"							\
-	"consoledev=ttyS0\0"						\
-	"loadaddr=a00000\0"						\
-	"fdtaddr=900000\0"						\
-	"fdtfile=mpc836x_rdk.dtb\0"					\
-	"fsfile=fs\0"							\
-	"ubootfile=u-boot.bin\0"					\
-	"mtdparts=mtdparts=60000000.nand-flash:4096k(kernel),128k(dtb),"\
-							"-(rootfs)\0"	\
-	"setbootargs=setenv bootargs console=$consoledev,$baudrate "	\
-		"$mtdparts panic=1\0"					\
-	"adddhcpargs=setenv bootargs $bootargs ip=on\0"			\
-	"addnfsargs=setenv bootargs $bootargs ip=$ipaddr:$serverip:"	\
-		"$gatewayip:$netmask:$hostname:$netdev:off "		\
-		"root=/dev/nfs rw nfsroot=$serverip:$rootpath\0"	\
-	"addnandargs=setenv bootargs $bootargs root=/dev/mtdblock3 "	\
-		"rootfstype=jffs2 rw\0"					\
-	"tftp_get_uboot=tftp 100000 $ubootfile\0"			\
-	"tftp_get_kernel=tftp $loadaddr $bootfile\0"			\
-	"tftp_get_dtb=tftp $fdtaddr $fdtfile\0"				\
-	"tftp_get_fs=tftp c00000 $fsfile\0"				\
-	"nand_erase_kernel=nand erase 0 400000\0"			\
-	"nand_erase_dtb=nand erase 400000 20000\0"			\
-	"nand_erase_fs=nand erase 420000 3be0000\0"			\
-	"nand_write_kernel=nand write.jffs2 $loadaddr 0 400000\0"	\
-	"nand_write_dtb=nand write.jffs2 $fdtaddr 400000 20000\0"	\
-	"nand_write_fs=nand write.jffs2 c00000 420000 $filesize\0"	\
-	"nand_read_kernel=nand read.jffs2 $loadaddr 0 400000\0"		\
-	"nand_read_dtb=nand read.jffs2 $fdtaddr 400000 20000\0"		\
-	"nor_reflash=protect off ff800000 ff87ffff ; "			\
-		"erase ff800000 ff87ffff ; "				\
-		"cp.b 100000 ff800000 $filesize\0"			\
-	"nand_reflash_kernel=run tftp_get_kernel nand_erase_kernel "	\
-		"nand_write_kernel\0"					\
-	"nand_reflash_dtb=run tftp_get_dtb nand_erase_dtb nand_write_dtb\0"\
-	"nand_reflash_fs=run tftp_get_fs nand_erase_fs nand_write_fs\0"	\
-	"nand_reflash=run nand_reflash_kernel nand_reflash_dtb "	\
-		"nand_reflash_fs\0"					\
-	"boot_m=bootm $loadaddr - $fdtaddr\0"				\
-	"dhcpboot=dhcp ; run setbootargs adddhcpargs tftp_get_dtb boot_m\0"\
-	"nfsboot=run setbootargs addnfsargs tftp_get_kernel tftp_get_dtb "\
-		"boot_m\0"						\
-	"nandboot=run setbootargs addnandargs nand_read_kernel nand_read_dtb "\
-		"boot_m\0"						\
-	""
-
-#define CONFIG_BOOTCOMMAND "run dhcpboot"
-
-#endif /* __CONFIG_H */