summaryrefslogtreecommitdiff
path: root/include/configs
diff options
context:
space:
mode:
authorWolfgang Denk <wd@denx.de>2010-08-10 22:20:27 +0200
committerWolfgang Denk <wd@denx.de>2010-08-10 22:20:27 +0200
commit201532a69cf7e7a84bff354fdab45947425d22b4 (patch)
tree4a09ca44e9fb720ec5b6ef29cca2de627e29f29a /include/configs
parent560639806da5172147a3b1ebd99839feac38b718 (diff)
parentb417260d871d4d8d336c160d95ed40cc8c0fb0fa (diff)
downloadu-boot-imx-201532a69cf7e7a84bff354fdab45947425d22b4.zip
u-boot-imx-201532a69cf7e7a84bff354fdab45947425d22b4.tar.gz
u-boot-imx-201532a69cf7e7a84bff354fdab45947425d22b4.tar.bz2
Merge branch 'master' of ../master
Diffstat (limited to 'include/configs')
-rw-r--r--include/configs/KUP4K.h173
-rw-r--r--include/configs/KUP4X.h64
-rw-r--r--include/configs/vpac270.h2
3 files changed, 131 insertions, 108 deletions
diff --git a/include/configs/KUP4K.h b/include/configs/KUP4K.h
index a829984..14d412d 100644
--- a/include/configs/KUP4K.h
+++ b/include/configs/KUP4K.h
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2000-2005
+ * (C) Copyright 2000-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
* Klaus Heydeck, Kieback & Peter GmbH & Co KG, heydeck@kieback-peter.de
*
@@ -42,46 +42,46 @@
#undef CONFIG_8xx_CONS_SMC2
#undef CONFIG_8xx_CONS_NONE
#define CONFIG_BAUDRATE 115200 /* console baudrate */
-#if 0
-#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
-#else
#define CONFIG_BOOTDELAY 1 /* autoboot after 1 second */
-#endif
#define CONFIG_BOARD_TYPES 1 /* support board types */
-
#undef CONFIG_BOOTARGS
-
#define CONFIG_EXTRA_ENV_SETTINGS \
-"slot_a_boot=setenv bootargs root=/dev/hda2 ip=off;" \
- "run addhw; diskboot 200000 0:1; bootm 200000\0" \
-"slot_b_boot=setenv bootargs root=/dev/hda2 ip=off;" \
- "run addhw; diskboot 200000 2:1; bootm 200000\0" \
-"nfs_boot=dhcp; run nfsargs addip addhw; bootm 200000\0" \
+"slot_a_boot=setenv bootargs root=/dev/sda2 ip=off;" \
+ "run addhw; mw.b 400000 00 80; diskboot 400000 0:1; bootm 400000\0" \
+"slot_b_boot=setenv bootargs root=/dev/sda2 ip=off;" \
+ "run addhw; mw.b 400000 00 80; diskboot 400000 2:1; bootm 400000\0" \
+"nfs_boot=mw.b 400000 00 80; dhcp; run nfsargs addip addhw; bootm 400000\0" \
+"fat_boot=mw.b 400000 00 80; fatload ide 2:1 400000 st.bin; run addhw; \
+ bootm 400000 \0" \
"panic_boot=echo No Bootdevice !!! reset\0" \
-"nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath}\0" \
+"nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${rootpath}\0" \
"ramargs=setenv bootargs root=/dev/ram rw\0" \
-"addip=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}" \
+"addip=setenv bootargs ${bootargs} ip=${ipaddr}::${gatewayip}" \
":${netmask}:${hostname}:${netdev}:off\0" \
-"addhw=setenv bootargs ${bootargs} hw=${hw} key1=${key1} panic=1\0" \
+"addhw=setenv bootargs ${bootargs} ${mtdparts} console=${console} ${debug} \
+ hw=${hw} key1=${key1} panic=1 mem=${mem}\0" \
+"console=ttyCPM0,115200\0" \
"netdev=eth0\0" \
-"contrast=55\0" \
+"contrast=20\0" \
"silent=1\0" \
+"mtdparts=" MTDPARTS_DEFAULT "\0" \
"load=tftp 200000 bootloader-4k.bitmap;tftp 100000 bootloader-4k.bin\0" \
-"update=protect off 1:0-7;era 1:0-7;cp.b 100000 40000000 ${filesize};" \
+"update=protect off 1:0-9;era 1:0-9;cp.b 100000 40000000 ${filesize};" \
"cp.b 200000 40050000 14000\0"
#define CONFIG_BOOTCOMMAND \
- "run slot_a_boot;run slot_b_boot;run nfs_boot;run panic_boot"
+ "run fat_boot;run slot_b_boot;run slot_a_boot;run nfs_boot;run panic_boot"
+#define CONFIG_PREBOOT "setenv preboot; saveenv"
#define CONFIG_MISC_INIT_R 1
#define CONFIG_MISC_INIT_F 1
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */
+#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */
#define CONFIG_WATCHDOG 1 /* watchdog enabled */
@@ -98,19 +98,17 @@
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_BOOTFILESIZE
-
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
-
/*
* enable I2C and select the hardware/software driver
*/
-#undef CONFIG_HARD_I2C /* I2C with hardware support */
-#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */
+#undef CONFIG_HARD_I2C /* I2C with hardware support */
+#define CONFIG_SOFT_I2C /* I2C bit-banged */
-#define CONFIG_SYS_I2C_SPEED 93000 /* 93 kHz is supposed to work */
-#define CONFIG_SYS_I2C_SLAVE 0xFE
+#define CONFIG_SYS_I2C_SPEED 93000 /* 93 kHz is supposed to work */
+#define CONFIG_SYS_I2C_SLAVE 0xFE
#ifdef CONFIG_SOFT_I2C
/*
@@ -130,14 +128,12 @@
#define I2C_DELAY udelay(2) /* 1/4 I2C clock duration */
#endif /* CONFIG_SOFT_I2C */
-
/*-----------------------------------------------------------------------
* I2C Configuration
*/
-#define CONFIG_SYS_I2C_PICIO_ADDR 0x21 /* PCF8574 IO Expander */
-#define CONFIG_SYS_I2C_RTC_ADDR 0x51 /* PCF8563 RTC */
-
+#define CONFIG_SYS_I2C_PICIO_ADDR 0x21 /* PCF8574 IO Expander */
+#define CONFIG_SYS_I2C_RTC_ADDR 0x51 /* PCF8563 RTC */
/* List of I2C addresses to be verified by POST */
@@ -145,27 +141,13 @@
CONFIG_SYS_I2C_RTC_ADDR, \
}
-
#define CONFIG_RTC_PCF8563 /* use Philips PCF8563 RTC */
#define CONFIG_SYS_DISCOVER_PHY
#define CONFIG_MII
-#if 0
-#define CONFIG_ETHADDR 00:0B:64:00:00:00 /* our OUI from IEEE */
-#endif
-#define CONFIG_KUP4K_LOGO 0x40050000 /* Address of logo bitmap */
-
/* Define to allow the user to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
-#if 1
-/* POST support */
-
-#define CONFIG_POST (CONFIG_SYS_POST_CPU | \
- CONFIG_SYS_POST_RTC | \
- CONFIG_SYS_POST_I2C)
-#endif
-
/*
* Command line configuration.
@@ -176,7 +158,9 @@
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_I2C
#define CONFIG_CMD_IDE
+#define CONFIG_CMD_MII
#define CONFIG_CMD_NFS
+#define CONFIG_CMD_FAT
#define CONFIG_CMD_SNTP
#ifdef CONFIG_POST
@@ -191,18 +175,21 @@
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CONFIG_SYS_MEMTEST_START 0x000400000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x002C00000 /* 4 ... 44 MB in DRAM */
+#define CONFIG_SYS_MEMTEST_START 0x000400000 /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END 0x005C00000 /* 4 ... 92 MB in DRAM */
+#define CONFIG_SYS_ALT_MEMTEST 1
+#define CONFIG_SYS_MEMTEST_SCRATCH 0x90000200 /* using latch as scratch register */
-#define CONFIG_SYS_LOAD_ADDR 0x200000 /* default load address */
+#define CONFIG_SYS_LOAD_ADDR 0x400000 /* default load address */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 115200 }
@@ -259,19 +246,22 @@
#define CONFIG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */
#define CONFIG_ENV_SECT_SIZE 0x10000
-/* Address and size of Redundant Environment Sector */
-#if 0
-#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET+CONFIG_ENV_SIZE)
-#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
-#endif
+/*-----------------------------------------------------------------------
+ * Dynamic MTD partition support
+ */
+#define MTDPARTS_DEFAULT "mtdparts=40000000.flash:256k(u-boot)," \
+ "64k(env)," \
+ "128k(splash)," \
+ "512k(etc)," \
+ "64k(hw-info)"
+
/*-----------------------------------------------------------------------
* Hardware Information Block
*/
-#if 1
#define CONFIG_SYS_HWINFO_OFFSET 0x000F0000 /* offset of HW Info block */
#define CONFIG_SYS_HWINFO_SIZE 0x00000100 /* size of HW Info block */
-#define CONFIG_SYS_HWINFO_MAGIC 0x4B26500D /* 'K&P<CR>' */
-#endif
+#define CONFIG_SYS_HWINFO_MAGIC 0x4B26500D /* 'K&P<CR>' */
+
/*-----------------------------------------------------------------------
* Cache Configuration
*/
@@ -286,12 +276,7 @@
*-----------------------------------------------------------------------
* Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
*/
-#if 0 && defined(CONFIG_WATCHDOG) /* KUP uses external TPS3705 WD */
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
- SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
-#else
#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
-#endif
/*-----------------------------------------------------------------------
* SIUMCR - SIU Module Configuration 11-6
@@ -391,7 +376,6 @@
/* Offset for alternate registers */
#define CONFIG_SYS_ATA_ALT_OFFSET 0x0100
-
/*-----------------------------------------------------------------------
*
*-----------------------------------------------------------------------
@@ -416,18 +400,20 @@
/*
* FLASH timing:
*/
-#define CONFIG_SYS_OR_TIMING_FLASH (OR_ACS_DIV1 | OR_TRLX | OR_CSNT_SAM | \
- OR_SCY_2_CLK | OR_EHTR | OR_BI)
+#define CONFIG_SYS_OR_TIMING_FLASH (OR_ACS_DIV2 | OR_CSNT_SAM | \
+ OR_SCY_5_CLK | OR_EHTR | OR_BI)
-#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V )
+#define CONFIG_SYS_OR0_REMAP \
+ (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_PRELIM \
+ (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_BR0_PRELIM \
+ ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V )
/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */
#define CONFIG_SYS_OR_TIMING_SDRAM 0x00000A00
-
/*
* Memory Periodic Timer Prescaler
*
@@ -475,7 +461,39 @@
/*
* MAMR settings for SDRAM
*/
-#define CONFIG_SYS_MAMR 0x80802114
+
+/* 8 column SDRAM */
+#define CONFIG_SYS_MAMR_8COL 0x68802114
+/* 9 column SDRAM */
+#define CONFIG_SYS_MAMR_9COL 0x68904114
+
+/*
+ * Chip Selects
+ */
+#define CONFIG_SYS_OR0
+#define CONFIG_SYS_BR0
+
+#define CONFIG_SYS_OR1_8COL 0xFF000A00
+#define CONFIG_SYS_BR1_8COL 0x00000081
+#define CONFIG_SYS_OR2_8COL 0xFE000A00
+#define CONFIG_SYS_BR2_8COL 0x01000081
+#define CONFIG_SYS_OR3_8COL 0xFC000A00
+#define CONFIG_SYS_BR3_8COL 0x02000081
+
+#define CONFIG_SYS_OR1_9COL 0xFE000A00
+#define CONFIG_SYS_BR1_9COL 0x00000081
+#define CONFIG_SYS_OR2_9COL 0xFE000A00
+#define CONFIG_SYS_BR2_9COL 0x02000081
+#define CONFIG_SYS_OR3_9COL 0xFE000A00
+#define CONFIG_SYS_BR3_9COL 0x04000081
+
+#define CONFIG_SYS_OR4 0xFFFF8926
+#define CONFIG_SYS_BR4 0x90000401
+
+#define CONFIG_SYS_OR5 0xFFC007F0 /* EPSON: 4 MB 17 WS or externel TA */
+#define CONFIG_SYS_BR5 0x80080801 /* Start at 0x80080000 */
+
+#define LATCH_ADDR 0x90000200
/*
* Internal Definitions
@@ -487,11 +505,14 @@
#define CONFIG_AUTOBOOT_KEYED /* use key strings to stop autoboot */
-#if 0
-#define CONFIG_AUTOBOOT_PROMPT \
- "Boote in %d Sekunden - stop mit \"2\"\n", bootdelay
-#endif
-#define CONFIG_AUTOBOOT_STOP_STR "." /* easy to stop for now */
-#define CONFIG_SILENT_CONSOLE 1
+#define CONFIG_AUTOBOOT_STOP_STR "."
+#define CONFIG_SILENT_CONSOLE 1
+#define CONFIG_SYS_DEVICE_NULLDEV 1 /* enble null device */
+#define CONFIG_VERSION_VARIABLE 1
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_BOARD_SETUP 1
#endif /* __CONFIG_H */
+
diff --git a/include/configs/KUP4X.h b/include/configs/KUP4X.h
index be6dfda..ab535e1 100644
--- a/include/configs/KUP4X.h
+++ b/include/configs/KUP4X.h
@@ -35,23 +35,20 @@
* (easy to change)
*/
-#define CONFIG_MPC859T 1 /* This is a MPC859T CPU */
-#define CONFIG_KUP4X 1 /* ...on a KUP4X module */
+#define CONFIG_MPC859T 1 /* This is a MPC859T CPU */
+#define CONFIG_KUP4X 1 /* ...on a KUP4X module */
-#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
+#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
#undef CONFIG_8xx_CONS_SMC2
#undef CONFIG_8xx_CONS_NONE
-#define CONFIG_BAUDRATE 115200 /* console baudrate */
-#if 0
-#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
-#else
-#define CONFIG_BOOTDELAY 1 /* autoboot after 1 second */
-#endif
+#define CONFIG_BAUDRATE 115200 /* console baudrate */
-#define CONFIG_BOARD_TYPES 1 /* support board types */
+#define CONFIG_BOOTDELAY 1 /* autoboot after 1 second */
-#define CONFIG_SYS_8XX_FACT 8 /* Multiply by 8 */
-#define CONFIG_SYS_8XX_XIN 16000000 /* 16 MHz in */
+#define CONFIG_BOARD_TYPES 1 /* support board types */
+
+#define CONFIG_SYS_8XX_FACT 8 /* Multiply by 8 */
+#define CONFIG_SYS_8XX_XIN 16000000 /* 16 MHz in */
#define MPC8XX_HZ ((CONFIG_SYS_8XX_XIN) * (CONFIG_SYS_8XX_FACT))
@@ -67,9 +64,9 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
"slot_a_boot=setenv bootargs root=/dev/hda2 ip=off;" \
"run addhw;diskboot 200000 0:1;bootm 200000\0" \
-"usb_boot=setenv bootargs root=/dev/sda2 ip=off;\
- run addhw; sleep 2; usb reset; usb scan; usbboot 200000 0:1;\
- usb stop; bootm 200000\0" \
+"usb_boot=setenv bootargs root=/dev/sda2 ip=off; \
+ run addhw; sleep 2; usb reset; usb scan; usbboot 200000 0:1; \
+ usb stop; bootm 200000\0" \
"nfs_boot=dhcp;run nfsargs addip addhw;bootm 200000\0" \
"panic_boot=echo No Bootdevice !!! reset\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath}\0" \
@@ -84,14 +81,14 @@
"cp.b 200000 40040000 14000\0"
#define CONFIG_BOOTCOMMAND \
- "run usb_boot;run_slot_a_boot;run nfs_boot;run panic_boot"
+ "run usb_boot;run slot_a_boot;run nfs_boot;run panic_boot"
#define CONFIG_MISC_INIT_R 1
#define CONFIG_MISC_INIT_F 1
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */
+#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */
#define CONFIG_WATCHDOG 1 /* watchdog enabled */
@@ -144,8 +141,8 @@
* I2C Configuration
*/
-#define CONFIG_SYS_I2C_PICIO_ADDR 0x21 /* PCF8574 IO Expander */
-#define CONFIG_SYS_I2C_RTC_ADDR 0x51 /* PCF8563 RTC */
+#define CONFIG_SYS_I2C_PICIO_ADDR 0x21 /* PCF8574 IO Expander */
+#define CONFIG_SYS_I2C_RTC_ADDR 0x51 /* PCF8563 RTC */
/* List of I2C addresses to be verified by POST */
@@ -160,22 +157,16 @@
#define CONFIG_SYS_DISCOVER_PHY
#define CONFIG_MII
-#if 0
-#define CONFIG_ETHADDR 00:0B:64:80:00:00 /* our OUI from IEEE */
-#endif
#undef CONFIG_KUP4K_LOGO
/* Define to allow the user to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
-#if 1
/* POST support */
-
#define CONFIG_POST (CONFIG_SYS_POST_CPU | \
CONFIG_SYS_POST_RTC | \
CONFIG_SYS_POST_I2C)
-#endif
/*
@@ -426,9 +417,12 @@
#define CONFIG_SYS_OR_TIMING_FLASH (OR_ACS_DIV1 | OR_TRLX | OR_CSNT_SAM | \
OR_SCY_2_CLK | OR_EHTR | OR_BI)
-#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V )
+#define CONFIG_SYS_OR0_REMAP \
+ (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_PRELIM \
+ (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_BR0_PRELIM \
+ ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V )
/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */
@@ -444,6 +438,15 @@
/*
+ * Chip Selects
+ */
+
+#define CONFIG_SYS_OR4 0xFFFF8926
+#define CONFIG_SYS_BR4 0x90000401
+
+#define LATCH_ADDR 0x90000200
+
+/*
* Internal Definitions
*
* Boot Flags
@@ -453,10 +456,7 @@
#define CONFIG_AUTOBOOT_KEYED /* use key strings to stop autoboot */
-#if 0
-#define CONFIG_AUTOBOOT_PROMPT \
- "Boote in %d Sekunden - stop mit \"2\"\n", bootdelay
-#endif
+
#define CONFIG_AUTOBOOT_STOP_STR "." /* easy to stop for now */
#define CONFIG_SILENT_CONSOLE 1
diff --git a/include/configs/vpac270.h b/include/configs/vpac270.h
index 6d02995..d3e22d9 100644
--- a/include/configs/vpac270.h
+++ b/include/configs/vpac270.h
@@ -228,6 +228,8 @@
#undef CONFIG_IDE_LED
#undef CONFIG_IDE_RESET
+#define __io
+
#define CONFIG_SYS_IDE_MAXBUS 1
#define CONFIG_SYS_IDE_MAXDEVICE 1