diff options
| author | wdenk <wdenk> | 2004-02-27 08:20:54 +0000 |
|---|---|---|
| committer | wdenk <wdenk> | 2004-02-27 08:20:54 +0000 |
| commit | 132ba5fdc546084dfbebe4668a6e18f5da8eb407 (patch) | |
| tree | 307c6b930e79fcd3c8543f3aac17b919192203be /include/configs | |
| parent | 11dadd547c08a3480ea153482e99c6ae70b73415 (diff) | |
| download | u-boot-imx-132ba5fdc546084dfbebe4668a6e18f5da8eb407.zip u-boot-imx-132ba5fdc546084dfbebe4668a6e18f5da8eb407.tar.gz u-boot-imx-132ba5fdc546084dfbebe4668a6e18f5da8eb407.tar.bz2 | |
* Patch by Pierre Aubert, 26 Feb 2004
add IDE support for MPC5200
* Patch by Masami Komiya, 26 Feb 2004:
add autoload via NFS
* Patch by Stephen Williams
Use of CONFIG_SERIAL_SOFTWARE_FIFO in board.c consistent with uses
elsewhere in the source.
Diffstat (limited to 'include/configs')
| -rw-r--r-- | include/configs/IceCube.h | 44 | ||||
| -rw-r--r-- | include/configs/eXalion.h | 6 |
2 files changed, 45 insertions, 5 deletions
diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h index 1dc9925..1d4daa7 100644 --- a/include/configs/IceCube.h +++ b/include/configs/IceCube.h @@ -81,6 +81,10 @@ #endif +/* Partitions */ +#define CONFIG_MAC_PARTITION +#define CONFIG_DOS_PARTITION + /* USB */ #if 1 #define CONFIG_USB_OHCI @@ -94,8 +98,12 @@ /* * Supported commands */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | ADD_PCI_CMD | \ - CFG_CMD_I2C | CFG_CMD_EEPROM | \ +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_EEPROM | \ + CFG_CMD_FAT | \ + CFG_CMD_I2C | \ + CFG_CMD_IDE | \ + ADD_PCI_CMD | \ ADD_USB_CMD) /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ @@ -293,4 +301,36 @@ #define CFG_RESET_ADDRESS 0xff000000 +/*----------------------------------------------------------------------- + * IDE/ATA stuff Supports IDE harddisk + *----------------------------------------------------------------------- + */ + +#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */ + +#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ +#undef CONFIG_IDE_LED /* LED for ide not supported */ + +#define CONFIG_IDE_RESET /* reset for ide supported */ +#define CONFIG_IDE_PREINIT + +#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */ +#define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ + +#define CFG_ATA_IDE0_OFFSET 0x0000 + +#define CFG_ATA_BASE_ADDR MPC5XXX_ATA + +/* Offset for data I/O */ +#define CFG_ATA_DATA_OFFSET (0x0060) + +/* Offset for normal register accesses */ +#define CFG_ATA_REG_OFFSET (CFG_ATA_DATA_OFFSET) + +/* Offset for alternate registers */ +#define CFG_ATA_ALT_OFFSET (0x005c) + +/* Interval between registers */ +#define CFG_ATA_STRIDE 4 + #endif /* __CONFIG_H */ diff --git a/include/configs/eXalion.h b/include/configs/eXalion.h index 5ebc7a9..a014c7c 100644 --- a/include/configs/eXalion.h +++ b/include/configs/eXalion.h @@ -50,13 +50,13 @@ #error #### Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240) #endif /* older kernels need clock in MHz newer in Hz */ - /* #define CONFIG_CLOCKS_IN_MHZ 1 *//* clocks passsed to Linux in MHz */ + /* #define CONFIG_CLOCKS_IN_MHZ 1 */ /* clocks passsed to Linux in MHz */ #undef CONFIG_CLOCKS_IN_MHZ #define CONFIG_BOOTDELAY 10 - /*#define CONFIG_DRAM_SPEED 66 *//* MHz */ + /*#define CONFIG_DRAM_SPEED 66 */ /* MHz */ #define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ CFG_CMD_FLASH | \ @@ -230,7 +230,7 @@ #define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */ #define CONFIG_PLL_PCI_TO_MEM_MULTIPLIER 2 /* for MPC8240 only */ - /*#define CONFIG_133MHZ_DRAM 1 *//* For 133 MHZ DRAM only !!!!!!!!!!! */ + /*#define CONFIG_133MHZ_DRAM 1 */ /* For 133 MHZ DRAM only !!!!!!!!!!! */ #if defined (CONFIG_MPC8245) /* Bit-field values for PMCR2. */ |