include/configs: Use new CONFIG_CMD_* in various m* named board config files.

Signed-off-by: Jon Loeliger <jdl@freescale.com>

9 files changed, 167 insertions, 189 deletions

diff --git a/include/configs/mcc200.h b/include/configs/mcc200.h
index c2324a0..10e25f0 100644
--- a/include/configs/mcc200.h
+++ b/include/configs/mcc200.h
@@ -40,11 +40,6 @@
 #define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH	*/
 #define BOOTFLAG_WARM		0x02	/* Software reboot			*/
 
-#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs			*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
 /*
  * Serial console configuration
  *
@@ -92,22 +87,21 @@
 
 /* USB */
 #define CONFIG_USB_OHCI
-#define ADD_USB_CMD		CFG_CMD_USB | CFG_CMD_FAT
 #define CONFIG_USB_STORAGE
 /* automatic software updates (see board/mcc200/auto_update.c) */
 #define CONFIG_AUTO_UPDATE 1
 
+
 /*
- * Supported commands
+ * Command line configuration.
  */
-#define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
-				ADD_USB_CMD	| \
-				CFG_CMD_BEDBUG	| \
-				CFG_CMD_FAT	| \
-				CFG_CMD_I2C)
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BEDBUG
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_USB
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
 
 /*
  * Autobooting
@@ -291,7 +285,7 @@
  */
 #define CFG_LONGHELP			/* undef to save memory		*/
 #define CFG_PROMPT		"=> "	/* Monitor Command Prompt	*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE		1024	/* Console I/O Buffer Size	*/
 #else
 #define CFG_CBSIZE		256	/* Console I/O Buffer Size	*/
@@ -307,6 +301,11 @@
 
 #define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
 
+#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs			*/
+#if defined(CONFIG_CMD_KGDB)
+#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
+#endif
+
 /*
  * Various low-level settings
  */
diff --git a/include/configs/ml300.h b/include/configs/ml300.h
index 6762cd6..423c6eb 100644
--- a/include/configs/ml300.h
+++ b/include/configs/ml300.h
@@ -87,13 +87,19 @@
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
 #define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
-#define REMOVE_COMMANDS	       (CFG_CMD_FLASH | CFG_CMD_LOADS | CFG_CMD_FAT | \
-				CFG_CMD_IMLS )
-#define CONFIG_COMMANDS	       ((CONFIG_CMD_DFL | CFG_CMD_NET) \
-				& ~REMOVE_COMMANDS)
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_NET
+
+#undef CONFIG_CMD_FLASH
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_FAT
+#undef CONFIG_CMD_IMLS
+
 
 /* #define CONFIG_SYS_CLK_FREQ XPAR_CORE_CLOCK_FREQ_HZ */
 /* 300000000 */
diff --git a/include/configs/ml401.h b/include/configs/ml401.h
index 3db2877..9537008 100644
--- a/include/configs/ml401.h
+++ b/include/configs/ml401.h
@@ -145,82 +145,45 @@
 	#define	CFG_FLASH_PROTECTION		/* hardware flash protection */
 #endif /* !FLASH */
 
-#ifdef	FLASH
-	#ifdef	RAMENV
-	#define	CONFIG_COMMANDS	(CONFIG__CMD_DFL |\
-				CFG_CMD_MEMORY |\
-				CFG_CMD_MISC |\
-				CFG_CMD_AUTOSCRIPT |\
-				CFG_CMD_IRQ |\
-				CFG_CMD_ASKENV |\
-				CFG_CMD_BDI |\
-				CFG_CMD_RUN |\
-				CFG_CMD_LOADS |\
-				CFG_CMD_LOADB |\
-				CFG_CMD_IMI |\
-				CFG_CMD_NET |\
-				CFG_CMD_CACHE |\
-				CFG_CMD_FAT |\
-				CFG_CMD_EXT2 |\
-				CFG_CMD_JFFS2 |\
-				CFG_CMD_ECHO |\
-				CFG_CMD_IMLS |\
-				CFG_CMD_FLASH |\
-				CFG_CMD_MFSL |\
-				CFG_CMD_PING \
-				)
-	#else	/* !RAMENV */
-	#define	CONFIG_COMMANDS	(CONFIG__CMD_DFL |\
-				CFG_CMD_MEMORY |\
-				CFG_CMD_MISC |\
-				CFG_CMD_AUTOSCRIPT |\
-				CFG_CMD_IRQ |\
-				CFG_CMD_ASKENV |\
-				CFG_CMD_BDI |\
-				CFG_CMD_RUN |\
-				CFG_CMD_LOADS |\
-				CFG_CMD_LOADB |\
-				CFG_CMD_IMI |\
-				CFG_CMD_NET |\
-				CFG_CMD_CACHE |\
-				CFG_CMD_IMLS |\
-				CFG_CMD_FLASH |\
-				CFG_CMD_PING |\
-				CFG_CMD_ENV |\
-				CFG_CMD_FAT |\
-				CFG_CMD_EXT2 |\
-				CFG_CMD_JFFS2 |\
-				CFG_CMD_ECHO |\
-				CFG_CMD_MFSL |\
-				CFG_CMD_SAVES \
-				)
 
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_AUTOSCRIPT
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMD_LOADS
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_MISC
+#define CONFIG_CMD_MFSL
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_RUN
+
+#if defined(FLASH)
+	#define CONFIG_CMD_ECHO
+	#define CONFIG_CMD_FLASH
+	#define CONFIG_CMD_IMLS
+	#define CONFIG_CMD_JFFS2
+
+	#if !defined(RAMENV)
+		#define CONFIG_CMD_ENV
+		#define CONFIG_CMD_SAVES
 	#endif
+#endif
+
+
 
-#else	/* !FLASH */
-	#define	CONFIG_COMMANDS	(CONFIG__CMD_DFL |\
-				CFG_CMD_MEMORY |\
-				CFG_CMD_MISC |\
-				CFG_CMD_AUTOSCRIPT |\
-				CFG_CMD_IRQ |\
-				CFG_CMD_ASKENV |\
-				CFG_CMD_BDI |\
-				CFG_CMD_RUN |\
-				CFG_CMD_LOADS |\
-				CFG_CMD_FAT |\
-				CFG_CMD_EXT2 |\
-				CFG_CMD_LOADB |\
-				CFG_CMD_IMI |\
-				CFG_CMD_NET |\
-				CFG_CMD_CACHE |\
-				CFG_CMD_MFSL |\
-				CFG_CMD_PING \
-				)
-#endif	/* !FLASH */
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
-#if (CONFIG_COMMANDS & CFG_CMD_JFFS2)
+#if defined(CONFIG_CMD_JFFS2)
 /* JFFS2 partitions */
 #define CONFIG_JFFS2_CMDLINE	/* mtdparts command line support */
 #define MTDIDS_DEFAULT		"nor0=ml401-0"
diff --git a/include/configs/modnet50.h b/include/configs/modnet50.h
index 2028767..33ae43e 100644
--- a/include/configs/modnet50.h
+++ b/include/configs/modnet50.h
@@ -65,10 +65,14 @@
 
 #define CONFIG_BOOTP_MASK       (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE)
 
-#define CONFIG_COMMANDS		((CONFIG_CMD_DFL | CFG_CMD_JFFS2))
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_JFFS2
+
 
 #define CONFIG_NETMASK          255.255.255.0
 #define CONFIG_IPADDR		192.168.30.2
@@ -81,7 +85,7 @@
 #define CONFIG_BOOTCOMMAND	"bootm 0x10020000 0x100a0000"
 #define CONFIG_BOOTARGS    	"console=ttyS0,38400 initrd=0x100a0040,530K root=/dev/ram keepinitrd"
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400		/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
 #endif
diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h
index e3899a5..7a61e49 100644
--- a/include/configs/motionpro.h
+++ b/include/configs/motionpro.h
@@ -37,28 +37,26 @@
 
 
 /*
- * Supported commands
+ * Command line configuration.
  */
-#define CONFIG_COMMANDS		(CONFIG_CMD_DFL	| \
-				CFG_CMD_ASKENV	| \
-				CFG_CMD_DHCP	| \
-				CFG_CMD_REGINFO	| \
-				CFG_CMD_IMMAP	| \
-				CFG_CMD_ELF	| \
-				CFG_CMD_MII	| \
-				CFG_CMD_BEDBUG	| \
-				CFG_CMD_NET	| \
-				CFG_CMD_PING	| \
-				CFG_CMD_IDE	| \
-				CFG_CMD_FAT	| \
-				CFG_CMD_JFFS2	| \
-				CFG_CMD_I2C	| \
-				CFG_CMD_DATE	| \
-				CFG_CMD_EEPROM	| \
-				CFG_CMD_DTT)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_BEDBUG
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_DTT
 
 
 /*
diff --git a/include/configs/mp2usb.h b/include/configs/mp2usb.h
index 04f1f24..3a62240 100644
--- a/include/configs/mp2usb.h
+++ b/include/configs/mp2usb.h
@@ -123,36 +123,44 @@
 
 #define CONFIG_BOOTDELAY      3
 
-#ifdef CONFIG_HARD_I2C
-#define CONFIG_COMMANDS		\
-		       ((CONFIG_CMD_DFL	| \
-			CFG_CMD_DATE	| \
-			CFG_CMD_DHCP 	| \
-			CFG_CMD_EEPROM	| \
-			CFG_CMD_I2C	| \
-			CFG_CMD_NFS	| \
-			CFG_CMD_SNTP	| \
-			CFG_CMD_MISC))
-#else
-#define CONFIG_COMMANDS		\
-		       ((CONFIG_CMD_DFL	| \
-			CFG_CMD_DHCP 	| \
-			CFG_CMD_NFS	| \
-			CFG_CMD_SNTP	| \
-			CFG_CMD_USB      | \
-			CFG_CMD_CACHE)	& \
-		      ~(CFG_CMD_BDI | \
-			CFG_CMD_IMI | \
-			CFG_CMD_AUTOSCRIPT | \
-			CFG_CMD_FPGA | \
-			CFG_CMD_MISC | \
-			CFG_CMD_LOADS ))
+
+#if !defined(CONFIG_HARD_I2C)
 #define CONFIG_TIMESTAMP
 #endif
-#define CFG_LONGHELP
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
+
+#if defined(CONFIG_HARD_I2C)
+
+    #define CONFIG_CMD_DATE
+    #define CONFIG_CMD_EEPROM
+    #define CONFIG_CMD_I2C
+    #define CONFIG_CMD_MISC
+
+#else
+
+    #define CONFIG_CMD_USB
+    #define CONFIG_CMD_CACHE
+
+    #undef CONFIG_CMD_AUTOSCRIPT
+    #undef CONFIG_CMD_BDI
+    #undef CONFIG_CMD_FPGA
+    #undef CONFIG_CMD_IMI
+    #undef CONFIG_CMD_LOADS
+    #undef CONFIG_CMD_MISC
+
+#endif
+
+
+#define CFG_LONGHELP
 
 #define CONFIG_NR_DRAM_BANKS	1
 #define PHYS_SDRAM		0x20000000
diff --git a/include/configs/mpc7448hpc2.h b/include/configs/mpc7448hpc2.h
index 243a3f6..36ce9bf 100644
--- a/include/configs/mpc7448hpc2.h
+++ b/include/configs/mpc7448hpc2.h
@@ -149,22 +149,25 @@
 #define CONFIG_BOOTP_MASK	(CONFIG_BOOTP_DEFAULT | \
 				CONFIG_BOOTP_BOOTFILESIZE)
 
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
-		| CFG_CMD_ASKENV \
-		| CFG_CMD_CACHE \
-		| CFG_CMD_PCI \
-		| CFG_CMD_I2C \
-		| CFG_CMD_SDRAM \
-		| CFG_CMD_EEPROM \
-		| CFG_CMD_FLASH \
-		| CFG_CMD_ENV \
-		| CFG_CMD_BSP \
-		| CFG_CMD_DHCP \
-		| CFG_CMD_PING \
-		| CFG_CMD_DATE)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DATE
+
 
 /*set date in u-boot*/
 #define CONFIG_RTC_M48T35A
@@ -182,7 +185,7 @@
 #define CFG_LONGHELP		/* undef to save memory */
 #define CFG_PROMPT	"=> "	/* Monitor Command Prompt */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE		1024	/* Console I/O Buffer Size */
 #define CONFIG_KGDB_BAUDRATE	115200	/* speed to run kgdb serial port at */
 #else
@@ -387,7 +390,7 @@
  * Cache Configuration
  */
 #define CFG_CACHELINE_SIZE	32	/* For all MPC74xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
diff --git a/include/configs/mx1ads.h b/include/configs/mx1ads.h
index 7f3dfd5..0ae2780 100644
--- a/include/configs/mx1ads.h
+++ b/include/configs/mx1ads.h
@@ -78,25 +78,23 @@
 
 #define CONFIG_BAUDRATE		115200
 
-/***********************************************************
- * Command definition
- ***********************************************************/
 
-#define CONFIG_COMMANDS \
-			(CONFIG_CMD_DFL	 | \
-			CFG_CMD_CACHE	 | \
-			CFG_CMD_REGINFO	 | \
-			CFG_CMD_ELF)
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_ELF
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
 
 #define CONFIG_BOOTDELAY	3
 #define CONFIG_BOOTARGS		"root=/dev/msdk mem=48M"
 #define CONFIG_BOOTFILE		"mx1ads"
 #define CONFIG_BOOTCOMMAND	"tftp; bootm"
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	115200		/* speed to run kgdb serial port */
 						/* what's this ? it's not used anywhere */
 #define CONFIG_KGDB_SER_INDEX	1		/* which serial port to use */
diff --git a/include/configs/mx1fs2.h b/include/configs/mx1fs2.h
index 9816be8..47ca0f1 100644
--- a/include/configs/mx1fs2.h
+++ b/include/configs/mx1fs2.h
@@ -34,22 +34,21 @@
 #undef	_CONFIG_UART4 /* internal uart 4 */
 #undef	CONFIG_SILENT_CONSOLE  /* use this to disable output */
 
+
 /*
- * Definition of u-boot build in commands. Check out CONFIG_CMD_DFL if
- * neccessary in include/cmd_confdefs.h file. (Un)comment for getting
- * functionality or size of u-boot code.
+ * Command line configuration.
  */
-#define CONFIG_COMMANDS		(CONFIG_CMD_DFL		 \
-				& ~CFG_CMD_LOADS	 \
-				& ~CFG_CMD_CONSOLE	 \
-				& ~CFG_CMD_AUTOSCRIPT	 \
-				& ~CFG_CMD_NET		 \
-				& ~CFG_CMD_PING		 \
-				& ~CFG_CMD_DHCP		 \
-				| CFG_CMD_JFFS2		 \
-				)
-
-#include <cmd_confdefs.h>
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_JFFS2
+
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_CONSOLE
+#undef CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_PING
+#undef CONFIG_CMD_DHCP
+
 
 /*
  * Boot options. Setting delay to -1 stops autostart count down.