Merge branch 'wd'

1 files changed, 526 insertions, 0 deletions

diff --git a/include/configs/yucca.h b/include/configs/yucca.h
new file mode 100644
index 0000000..0e58e7e
--- /dev/null
+++ b/include/configs/yucca.h
@@ -0,0 +1,526 @@
+/*
+ * (C) Copyright 2004 Paul Reynolds <PaulReynolds@lhsolutions.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/************************************************************************
+ * 1 january 2005	Alain Saurel <asaurel@amcc.com>
+ * Adapted to current Das U-Boot source
+ ***********************************************************************/
+/************************************************************************
+ * yucca.h - configuration for AMCC 440SPe Ref (yucca)
+ ***********************************************************************/
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define DEBUG
+#undef DEBUG
+
+/*-----------------------------------------------------------------------
+ * High Level Configuration Options
+ *----------------------------------------------------------------------*/
+#define CONFIG_4xx			1	/* ... PPC4xx family	*/
+#define CONFIG_440			1	/* ... PPC440 family	*/
+#define CONFIG_440SPE			1	/* Specifc SPe support	*/
+#define CONFIG_BOARD_EARLY_INIT_F	1	/* Call board_pre_init	*/
+#undef	CFG_DRAM_TEST				/* Disable-takes long time */
+#define CONFIG_SYS_CLK_FREQ	33333333	/* external freq to pll	*/
+#define EXTCLK_33_33		33333333
+#define EXTCLK_66_66		66666666
+#define EXTCLK_50		50000000
+#define EXTCLK_83		83333333
+
+#define	CONFIG_IBM_EMAC4_V4		1
+#define	CONFIG_MISC_INIT_F		1	/* Use misc_init_f()	*/
+#undef  CONFIG_SHOW_BOOT_PROGRESS
+#undef  CONFIG_STRESS
+#undef  ENABLE_ECC
+/*-----------------------------------------------------------------------
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ *----------------------------------------------------------------------*/
+#define CFG_SDRAM_BASE		0x00000000	/* _must_ be 0		*/
+#define CFG_FLASH_BASE		0xfff00000	/* start of FLASH	*/
+#define CFG_MONITOR_BASE	0xfffb0000	/* start of monitor	*/
+#define CFG_PERIPHERAL_BASE	0xa0000000	/* internal peripherals	*/
+#define CFG_ISRAM_BASE		0x90000000	/* internal SRAM	*/
+
+#define CFG_PCI_MEMBASE		0x80000000	/* mapped pci memory	*/
+#define CFG_PCI_MEMBASE1	0x90000000	/* mapped pci memory	*/
+#define CFG_PCI_MEMBASE2	0xa0000000	/* mapped pci memory	*/
+#define CFG_PCI_MEMBASE3	0xb0000000	/* mapped pci memory	*/
+
+#define CFG_PCI_BASE		0xd0000000	/* internal PCI regs	*/
+#define CFG_PCI_TARGBASE	0x80000000	/*PCIaddr mapped to CFG_PCI_MEMBASE*/
+
+/* #define CFG_PCI_BASE_IO	0xB8000000 */	/* internal PCI I-O	*/
+/* #define CFG_PCI_BASE_REGS	0xBEC00000 */	/* internal PCI regs	*/
+/* #define CFG_PCI_BASE_CYCLE	0xBED00000 */	/* internal PCI regs	*/
+
+/* System RAM mapped to PCI space */
+#define CONFIG_PCI_SYS_MEM_BUS	CFG_SDRAM_BASE
+#define CONFIG_PCI_SYS_MEM_PHYS	CFG_SDRAM_BASE
+#define CONFIG_PCI_SYS_MEM_SIZE	(1024 * 1024 * 1024)
+
+#define CFG_FPGA_BASE		0xe2000000	/* epld			*/
+#define CFG_OPER_FLASH		0xe7000000	/* SRAM - OPER Flash	*/
+
+/* #define CFG_NVRAM_BASE_ADDR 0x08000000 */
+/*-----------------------------------------------------------------------
+ * Initial RAM & stack pointer (placed in internal SRAM)
+ *----------------------------------------------------------------------*/
+#define CFG_TEMP_STACK_OCM	1
+#define CFG_OCM_DATA_ADDR	CFG_ISRAM_BASE
+#define CFG_INIT_RAM_ADDR	CFG_ISRAM_BASE	/* Initial RAM address	*/
+#define CFG_INIT_RAM_END	0x2000		/* End of used area in RAM */
+#define CFG_GBL_DATA_SIZE	128		/* num bytes initial data */
+
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_POST_WORD_ADDR	(CFG_GBL_DATA_OFFSET - 0x4)
+#define CFG_INIT_SP_OFFSET	CFG_POST_WORD_ADDR
+
+#define CFG_MONITOR_LEN		(320 * 1024)	/* Reserve 320 kB for Mon */
+#define CFG_MALLOC_LEN		(512 * 1024)	/* Reserve 512 kB for malloc */
+
+/*-----------------------------------------------------------------------
+ * Serial Port
+ *----------------------------------------------------------------------*/
+#define CONFIG_SERIAL_MULTI	1
+#undef CONFIG_UART1_CONSOLE
+
+#undef	CONFIG_SERIAL_SOFTWARE_FIFO
+#undef CFG_EXT_SERIAL_CLOCK
+/* #define CFG_EXT_SERIAL_CLOCK	(1843200 * 6) */ /* Ext clk @ 11.059 MHz */
+
+#define CONFIG_BAUDRATE		115200
+
+#define CFG_BAUDRATE_TABLE  \
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+/*-----------------------------------------------------------------------
+ * DDR SDRAM
+ *----------------------------------------------------------------------*/
+#undef CONFIG_SPD_EEPROM		/* Use SPD EEPROM for setup	*/
+#define SPD_EEPROM_ADDRESS {0x53, 0x52}	/* SPD i2c spd addresses	*/
+#define IIC0_DIMM0_ADDR		0x53
+#define IIC0_DIMM1_ADDR		0x52
+
+/*-----------------------------------------------------------------------
+ * I2C
+ *----------------------------------------------------------------------*/
+#define CONFIG_HARD_I2C		1	/* I2C with hardware support	*/
+#undef	CONFIG_SOFT_I2C			/* I2C bit-banged		*/
+#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CFG_I2C_SLAVE		0x7F
+
+#define IIC0_BOOTPROM_ADDR	0x50
+#define IIC0_ALT_BOOTPROM_ADDR	0x54
+
+/* Don't probe these addrs */
+#define CFG_I2C_NOPROBES	{0x50, 0x52, 0x53, 0x54}
+
+/* #if (CONFIG_COMMANDS & CFG_CMD_EEPROM) */
+/* #define CFG_I2C_EEPROM_ADDR	0x50 */	/* I2C boot EEPROM		*/
+#define CFG_I2C_EEPROM_ADDR_LEN	2	/* Bytes of address		*/
+/* #endif */
+
+/*-----------------------------------------------------------------------
+ * Environment
+ *----------------------------------------------------------------------*/
+/* #define CFG_NVRAM_SIZE	(0x2000 - 8) */	/* NVRAM size(8k)- RTC regs */
+
+#undef  CFG_ENV_IS_IN_NVRAM		/* ... not in NVRAM		*/
+#define	CFG_ENV_IS_IN_FLASH	1	/* Environment uses flash	*/
+#undef	CFG_ENV_IS_IN_EEPROM		/* ... not in EEPROM		*/
+#define CONFIG_ENV_OVERWRITE	1
+
+#define CONFIG_PREBOOT	"echo;"	\
+	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+	"echo"
+
+#undef	CONFIG_BOOTARGS
+
+#define	CONFIG_EXTRA_ENV_SETTINGS					\
+	"netdev=eth0\0"							\
+	"hostname=yucca\0"						\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+		"nfsroot=${serverip}:${rootpath}\0"			\
+	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+	"addip=setenv bootargs ${bootargs} "				\
+		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
+		":${hostname}:${netdev}:off panic=1\0"			\
+	"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
+	"flash_nfs=run nfsargs addip addtty;"				\
+		"bootm ${kernel_addr}\0"				\
+	"flash_self=run ramargs addip addtty;"				\
+		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
+	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"     \
+		"bootm\0"						\
+	"rootpath=/opt/eldk/ppc_4xx\0"				\
+	"bootfile=yucca/uImage\0"					\
+	"kernel_addr=E7F10000\0"					\
+	"ramdisk_addr=E7F20000\0"					\
+	"load=tftp 100000 yuca/u-boot.bin\0"				\
+	"update=protect off 2:4-7;era 2:4-7;"				\
+		"cp.b ${fileaddr} FFFB0000 ${filesize};"		\
+		"setenv filesize;saveenv\0"				\
+	"upd=run load;run update\0"					\
+	""
+#define CONFIG_BOOTCOMMAND	"run flash_self"
+
+#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
+#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+
+#define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
+				CFG_CMD_ASKENV	| \
+				CFG_CMD_EEPROM	| \
+				CFG_CMD_DHCP	| \
+				CFG_CMD_DIAG	| \
+				CFG_CMD_ELF	| \
+				CFG_CMD_I2C	| \
+				CFG_CMD_IRQ	| \
+				CFG_CMD_MII	| \
+				CFG_CMD_NET	| \
+				CFG_CMD_NFS	| \
+				CFG_CMD_PCI	| \
+				CFG_CMD_PING	| \
+				CFG_CMD_REGINFO	| \
+				CFG_CMD_SDRAM	)
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#define CONFIG_MII		1	/* MII PHY management		*/
+#undef CONFIG_NET_MULTI
+#define CONFIG_PHY_ADDR		1	/* PHY address, See schematics	*/
+#define CONFIG_HAS_ETH0
+#define CONFIG_PHY_RESET        1	/* reset phy upon startup	*/
+#define CONFIG_PHY_RESET_DELAY	1000
+#define CONFIG_CIS8201_PHY	1	/* Enable 'special' RGMII mode for Cicada phy */
+#define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
+#define CFG_RX_ETH_BUFFER	32	/* Number of ethernet rx buffers & descriptors */
+
+#undef CONFIG_WATCHDOG			/* watchdog disabled		*/
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP				/* undef to save memory		*/
+#define CFG_PROMPT		"=> "		/* Monitor Command Prompt	*/
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE		1024		/* Console I/O Buffer Size	*/
+#else
+#define CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
+#endif
+#define CFG_PBSIZE		(CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS		16		/* max number of command args	*/
+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+
+#define CFG_MEMTEST_START	0x0400000	/* memtest works on		*/
+#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM		*/
+
+#define CFG_LOAD_ADDR		0x100000	/* default load address		*/
+#define CFG_EXTBDINFO		1		/* To use extended board_into (bd_t) */
+
+#define CFG_HZ			1000		/* decrementer freq: 1 ms ticks */
+
+/*-----------------------------------------------------------------------
+ * FLASH related
+ *----------------------------------------------------------------------*/
+#define CFG_MAX_FLASH_BANKS	3	/* number of banks		*/
+#define CFG_MAX_FLASH_SECT	256	/* sectors per device		*/
+
+#undef	CFG_FLASH_CHECKSUM
+#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms) */
+
+#define CFG_FLASH_ADDR0		0x5555
+#define CFG_FLASH_ADDR1		0x2aaa
+#define CFG_FLASH_WORD_SIZE	unsigned char
+
+#define CFG_FLASH_2ND_16BIT_DEV	1	/* evb440SPe has 8 and 16bit device */
+#define CFG_FLASH_2ND_ADDR	0xe7c00000 /* evb440SPe has 8 and 16bit device*/
+
+#ifdef CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_SECT_SIZE	0x10000	/* size of one complete sector	*/
+#define CFG_ENV_ADDR		0xfffa0000
+/* #define CFG_ENV_ADDR		(CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE) */
+#define CFG_ENV_SIZE		0x10000	/* Size of Environment vars	*/
+#endif /* CFG_ENV_IS_IN_FLASH */
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *-----------------------------------------------------------------------
+ */
+/* General PCI */
+#define CONFIG_PCI			/* include pci support		*/
+#define CONFIG_PCI_PNP		1	/* do pci plug-and-play		*/
+#define CONFIG_PCI_SCAN_SHOW	1	/* show pci devices on startup	*/
+#undef CONFIG_PCI_CONFIG_HOST_BRIDGE
+
+/* Board-specific PCI */
+#define CFG_PCI_PRE_INIT	1	/* enable board pci_pre_init()	*/
+#define CFG_PCI_TARGET_INIT		/* let board init pci target    */
+#undef	CFG_PCI_MASTER_INIT
+
+#define CFG_PCI_SUBSYS_VENDORID 0x1014	/* IBM				*/
+#define CFG_PCI_SUBSYS_DEVICEID 0xcafe	/* Whatever			*/
+/* #define CFG_PCI_SUBSYS_ID	CFG_PCI_SUBSYS_DEVICEID */
+
+/*
+ *  NETWORK Support (PCI):
+ */
+/* Support for Intel 82557/82559/82559ER chips. */
+#define CONFIG_EEPRO100
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ		(8 << 20)	/*Initial Memory map for Linux*/
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_DCACHE_SIZE		8192	/* For AMCC 405 CPUs		*/
+#define CFG_CACHELINE_SIZE	32	/* ...				*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM	0x02		/* Software reboot */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
+#endif
+
+/* FB Divisor selection */
+#define FPGA_FB_DIV_6		6
+#define FPGA_FB_DIV_10		10
+#define FPGA_FB_DIV_12		12
+#define FPGA_FB_DIV_20		20
+
+/* VCO Divisor selection */
+#define	FPGA_VCO_DIV_4		4
+#define	FPGA_VCO_DIV_6		6
+#define	FPGA_VCO_DIV_8		8
+#define	FPGA_VCO_DIV_10		10
+
+/*----------------------------------------------------------------------------+
+| FPGA registers and bit definitions
++----------------------------------------------------------------------------*/
+/* PowerPC 440SPe Board FPGA is reached with physical address 0x1 E2000000. */
+/* TLB initialization makes it correspond to logical address 0xE2000000. */
+/* => Done init_chip.s in bootlib */
+#define FPGA_REG_BASE_ADDR	0xE2000000
+#define FPGA_GPIO_BASE_ADDR	0xE2010000
+#define FPGA_INT_BASE_ADDR	0xE2020000
+
+/*----------------------------------------------------------------------------+
+| Display
++----------------------------------------------------------------------------*/
+#define PPC440SPE_DISPLAY	FPGA_REG_BASE_ADDR
+
+#define PPC440SPE_DISPLAY_D8	(FPGA_REG_BASE_ADDR+0x06)
+#define PPC440SPE_DISPLAY_D4	(FPGA_REG_BASE_ADDR+0x04)
+#define PPC440SPE_DISPLAY_D2	(FPGA_REG_BASE_ADDR+0x02)
+#define PPC440SPE_DISPLAY_D1	(FPGA_REG_BASE_ADDR+0x00)
+/*define   WRITE_DISPLAY_DIGIT(n) IOREG8(FPGA_REG_BASE_ADDR + (2*n))*/
+/*#define   IOREG8(addr) *((volatile unsigned char *)(addr))*/
+
+/*----------------------------------------------------------------------------+
+| ethernet/reset/boot Register 1
++----------------------------------------------------------------------------*/
+#define FPGA_REG10	(FPGA_REG_BASE_ADDR+0x10)
+
+#define FPGA_REG10_10MHZ_ENABLE		0x8000
+#define FPGA_REG10_100MHZ_ENABLE	0x4000
+#define FPGA_REG10_GIGABIT_ENABLE	0x2000
+#define FPGA_REG10_FULL_DUPLEX		0x1000	/* force Full Duplex*/
+#define FPGA_REG10_RESET_ETH		0x0800
+#define FPGA_REG10_AUTO_NEG_DIS		0x0400
+#define FPGA_REG10_INTP_ETH		0x0200
+
+#define FPGA_REG10_RESET_HISR		0x0080
+#define FPGA_REG10_ENABLE_DISPLAY	0x0040
+#define FPGA_REG10_RESET_SDRAM		0x0020
+#define FPGA_REG10_OPER_BOOT		0x0010
+#define FPGA_REG10_SRAM_BOOT		0x0008
+#define FPGA_REG10_SMALL_BOOT		0x0004
+#define FPGA_REG10_FORCE_COLA		0x0002
+#define FPGA_REG10_COLA_MANUAL		0x0001
+
+#define FPGA_REG10_SDRAM_ENABLE		0x0020
+
+#define FPGA_REG10_ENET_ENCODE2(n) ((((unsigned long)(n))&0x0F)<<4) /*from ocotea ?*/
+#define FPGA_REG10_ENET_DECODE2(n) ((((unsigned long)(n))>>4)&0x0F) /*from ocotea ?*/
+
+/*----------------------------------------------------------------------------+
+| MUX control
++----------------------------------------------------------------------------*/
+#define FPGA_REG12	(FPGA_REG_BASE_ADDR+0x12)
+
+#define FPGA_REG12_EBC_CTL		0x8000
+#define FPGA_REG12_UART1_CTS_RTS	0x4000
+#define FPGA_REG12_UART0_RX_ENABLE	0x2000
+#define FPGA_REG12_UART1_RX_ENABLE	0x1000
+#define FPGA_REG12_UART2_RX_ENABLE	0x0800
+#define FPGA_REG12_EBC_OUT_ENABLE	0x0400
+#define FPGA_REG12_GPIO0_OUT_ENABLE	0x0200
+#define FPGA_REG12_GPIO1_OUT_ENABLE	0x0100
+#define FPGA_REG12_GPIO_SELECT		0x0010
+#define FPGA_REG12_GPIO_CHREG		0x0008
+#define FPGA_REG12_GPIO_CLK_CHREG	0x0004
+#define FPGA_REG12_GPIO_OETRI		0x0002
+#define FPGA_REG12_EBC_ERROR		0x0001
+
+/*----------------------------------------------------------------------------+
+| PCI Clock control
++----------------------------------------------------------------------------*/
+#define FPGA_REG16	(FPGA_REG_BASE_ADDR+0x16)
+
+#define FPGA_REG16_PCI_CLK_CTL0		0x8000
+#define FPGA_REG16_PCI_CLK_CTL1		0x4000
+#define FPGA_REG16_PCI_CLK_CTL2		0x2000
+#define FPGA_REG16_PCI_CLK_CTL3		0x1000
+#define FPGA_REG16_PCI_CLK_CTL4		0x0800
+#define FPGA_REG16_PCI_CLK_CTL5		0x0400
+#define FPGA_REG16_PCI_CLK_CTL6		0x0200
+#define FPGA_REG16_PCI_CLK_CTL7		0x0100
+#define FPGA_REG16_PCI_CLK_CTL8		0x0080
+#define FPGA_REG16_PCI_CLK_CTL9		0x0040
+#define FPGA_REG16_PCI_EXT_ARB0		0x0020
+#define FPGA_REG16_PCI_MODE_1		0x0010
+#define FPGA_REG16_PCI_TARGET_MODE	0x0008
+#define FPGA_REG16_PCI_INTP_MODE	0x0004
+
+/* FB1 Divisor selection */
+#define FPGA_REG16_FB2_DIV_MASK		0x1000
+#define FPGA_REG16_FB2_DIV_LOW		0x0000
+#define FPGA_REG16_FB2_DIV_HIGH		0x1000
+/* FB2 Divisor selection */
+/* S3 switch on Board */
+#define FPGA_REG16_FB1_DIV_MASK		0x2000
+#define FPGA_REG16_FB1_DIV_LOW		0x0000
+#define FPGA_REG16_FB1_DIV_HIGH		0x2000
+/* PCI0 Clock Selection */
+/* S3 switch on Board */
+#define FPGA_REG16_PCI0_CLK_MASK	0x0c00
+#define FPGA_REG16_PCI0_CLK_33_33	0x0000
+#define FPGA_REG16_PCI0_CLK_66_66	0x0800
+#define FPGA_REG16_PCI0_CLK_100		0x0400
+#define FPGA_REG16_PCI0_CLK_133_33	0x0c00
+/* VCO Divisor selection */
+/* S3 switch on Board */
+#define FPGA_REG16_VCO_DIV_MASK		0xc000
+#define FPGA_REG16_VCO_DIV_4		0x0000
+#define FPGA_REG16_VCO_DIV_8		0x4000
+#define FPGA_REG16_VCO_DIV_6		0x8000
+#define FPGA_REG16_VCO_DIV_10		0xc000
+/* Master Clock Selection */
+/* S3, S4 switches on Board */
+#define FPGA_REG16_MASTER_CLK_MASK	0x01c0
+#define FPGA_REG16_MASTER_CLK_EXT	0x0000
+#define FPGA_REG16_MASTER_CLK_66_66	0x0040
+#define FPGA_REG16_MASTER_CLK_50	0x0080
+#define FPGA_REG16_MASTER_CLK_33_33	0x00c0
+#define FPGA_REG16_MASTER_CLK_25	0x0100
+
+/*----------------------------------------------------------------------------+
+| PCI Miscellaneous
++----------------------------------------------------------------------------*/
+#define FPGA_REG18	(FPGA_REG_BASE_ADDR+0x18)
+
+#define FPGA_REG18_PCI_PRSNT1		0x8000
+#define FPGA_REG18_PCI_PRSNT2		0x4000
+#define FPGA_REG18_PCI_INTA		0x2000
+#define FPGA_REG18_PCI_SLOT0_INTP	0x1000
+#define FPGA_REG18_PCI_SLOT1_INTP	0x0800
+#define FPGA_REG18_PCI_SLOT2_INTP	0x0400
+#define FPGA_REG18_PCI_SLOT3_INTP	0x0200
+#define FPGA_REG18_PCI_PCI0_VC		0x0100
+#define FPGA_REG18_PCI_PCI0_VTH1	0x0080
+#define FPGA_REG18_PCI_PCI0_VTH2	0x0040
+#define FPGA_REG18_PCI_PCI0_VTH3	0x0020
+
+/*----------------------------------------------------------------------------+
+| PCIe Miscellaneous
++----------------------------------------------------------------------------*/
+#define FPGA_REG1A	(FPGA_REG_BASE_ADDR+0x1A)
+
+#define FPGA_REG1A_PE0_GLED		0x8000
+#define FPGA_REG1A_PE1_GLED		0x4000
+#define FPGA_REG1A_PE2_GLED		0x2000
+#define FPGA_REG1A_PE0_YLED		0x1000
+#define FPGA_REG1A_PE1_YLED		0x0800
+#define FPGA_REG1A_PE2_YLED		0x0400
+#define FPGA_REG1A_PE0_PWRON		0x0200
+#define FPGA_REG1A_PE1_PWRON		0x0100
+#define FPGA_REG1A_PE2_PWRON		0x0080
+#define FPGA_REG1A_PE0_REFCLK_ENABLE	0x0040
+#define FPGA_REG1A_PE1_REFCLK_ENABLE	0x0020
+#define FPGA_REG1A_PE2_REFCLK_ENABLE	0x0010
+#define FPGA_REG1A_PE_SPREAD0		0x0008
+#define FPGA_REG1A_PE_SPREAD1		0x0004
+#define FPGA_REG1A_PE_SELSOURCE_0	0x0002
+#define FPGA_REG1A_PE_SELSOURCE_1	0x0001
+
+/*----------------------------------------------------------------------------+
+| PCIe Miscellaneous
++----------------------------------------------------------------------------*/
+#define FPGA_REG1C	(FPGA_REG_BASE_ADDR+0x1C)
+
+#define FPGA_REG1C_PE0_ROOTPOINT	0x8000
+#define FPGA_REG1C_PE1_ENDPOINT		0x4000
+#define FPGA_REG1C_PE2_ENDPOINT		0x2000
+#define FPGA_REG1C_PE0_PRSNT		0x1000
+#define FPGA_REG1C_PE1_PRSNT		0x0800
+#define FPGA_REG1C_PE2_PRSNT		0x0400
+#define FPGA_REG1C_PE0_WAKE		0x0080
+#define FPGA_REG1C_PE1_WAKE		0x0040
+#define FPGA_REG1C_PE2_WAKE		0x0020
+#define FPGA_REG1C_PE0_PERST		0x0010
+#define FPGA_REG1C_PE1_PERST		0x0080
+#define FPGA_REG1C_PE2_PERST		0x0040
+
+/*----------------------------------------------------------------------------+
+| Defines
++----------------------------------------------------------------------------*/
+#define PERIOD_133_33MHZ	7500	/* 7,5ns */
+#define PERIOD_100_00MHZ	10000	/* 10ns */
+#define PERIOD_83_33MHZ		12000	/* 12ns */
+#define PERIOD_75_00MHZ		13333	/* 13,333ns */
+#define PERIOD_66_66MHZ		15000	/* 15ns */
+#define PERIOD_50_00MHZ		20000	/* 20ns */
+#define PERIOD_33_33MHZ		30000	/* 30ns */
+#define PERIOD_25_00MHZ		40000	/* 40ns */
+
+/*---------------------------------------------------------------------------*/
+
+#endif	/* __CONFIG_H */