summaryrefslogtreecommitdiff
path: root/include/configs/yucca.h
diff options
context:
space:
mode:
authorWolfgang Denk <wd@pollux.denx.de>2006-07-05 10:42:14 +0200
committerWolfgang Denk <wd@pollux.denx.de>2006-07-05 10:42:14 +0200
commitcaaeaf925fe15f46c1d5c85c37330029c86e0f39 (patch)
tree8cdb0e361d02ca700b97610b4eec355d8dbc5ad9 /include/configs/yucca.h
parent0095b787fe97a43cab575e7383ef681ecfb765f2 (diff)
downloadu-boot-imx-caaeaf925fe15f46c1d5c85c37330029c86e0f39.zip
u-boot-imx-caaeaf925fe15f46c1d5c85c37330029c86e0f39.tar.gz
u-boot-imx-caaeaf925fe15f46c1d5c85c37330029c86e0f39.tar.bz2
Bring yucca config more in line with other AMCC boards.
Diffstat (limited to 'include/configs/yucca.h')
-rw-r--r--include/configs/yucca.h62
1 files changed, 33 insertions, 29 deletions
diff --git a/include/configs/yucca.h b/include/configs/yucca.h
index e6d9843..ee5a448 100644
--- a/include/configs/yucca.h
+++ b/include/configs/yucca.h
@@ -152,29 +152,13 @@
#undef CFG_ENV_IS_IN_EEPROM /* ... not in EEPROM */
#define CONFIG_ENV_OVERWRITE 1
-#define CONFIG_BOOTARGS "console=ttyS0,115200n8 root=/dev/nfs rw"
-#define CONFIG_BOOTCOMMAND "bootm E7C00000" /* autoboot command */
-#define CONFIG_BOOTDELAY -1 /* -1 to disable autoboot */
+#define CONFIG_PREBOOT "echo;" \
+ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+ "echo"
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
-
-#define CONFIG_MII 1 /* MII PHY management */
-#undef CONFIG_NET_MULTI
-#define CONFIG_PHY_ADDR 1 /* PHY address, See schematics */
-#define CONFIG_HAS_ETH0
-#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
-#define CONFIG_PHY_RESET_DELAY 1000
-#define CONFIG_CIS8201_PHY 1 /* Enable 'special' RGMII mode for Cicada phy */
-#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
-#define CONFIG_NETMASK 255.255.0.0
-#define CONFIG_IPADDR 192.168.80.10
-#define CONFIG_ETHADDR 00:04:AC:01:CA:FE
-#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
-#define CONFIG_SERVERIP 192.168.1.1
+#undef CONFIG_BOOTARGS
#define CONFIG_EXTRA_ENV_SETTINGS \
- "loads_echo=1\0" \
"netdev=eth0\0" \
"hostname=yucca\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
@@ -190,7 +174,7 @@
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
"bootm\0" \
- "rootpath=/opt/eldk-4.0/ppc_4xx\0" \
+ "rootpath=/opt/eldk/ppc_4xx\0" \
"bootfile=yucca/uImage\0" \
"kernel_addr=E7F10000\0" \
"ramdisk_addr=E7F20000\0" \
@@ -200,22 +184,42 @@
"setenv filesize;saveenv\0" \
"upd=run load;run update\0" \
""
+#define CONFIG_BOOTCOMMAND "run flash_self"
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_PCI | \
- CFG_CMD_IRQ | \
- CFG_CMD_I2C | \
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+ CFG_CMD_ASKENV | \
+ CFG_CMD_EEPROM | \
CFG_CMD_DHCP | \
- CFG_CMD_PING | \
CFG_CMD_DIAG | \
- CFG_CMD_NET | \
+ CFG_CMD_ELF | \
+ CFG_CMD_I2C | \
+ CFG_CMD_IRQ | \
CFG_CMD_MII | \
- CFG_CMD_EEPROM | \
- CFG_CMD_ELF )
+ CFG_CMD_NET | \
+ CFG_CMD_NFS | \
+ CFG_CMD_PCI | \
+ CFG_CMD_PING | \
+ CFG_CMD_REGINFO | \
+ CFG_CMD_SDRAM )
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
+#define CONFIG_MII 1 /* MII PHY management */
+#undef CONFIG_NET_MULTI
+#define CONFIG_PHY_ADDR 1 /* PHY address, See schematics */
+#define CONFIG_HAS_ETH0
+#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
+#define CONFIG_PHY_RESET_DELAY 1000
+#define CONFIG_CIS8201_PHY 1 /* Enable 'special' RGMII mode for Cicada phy */
+#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
+#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
+
#undef CONFIG_WATCHDOG /* watchdog disabled */
/*