Merge with /home/tur/proj/uboot_linux_v38b/u-boot

1 files changed, 343 insertions, 0 deletions

diff --git a/include/configs/v38b.h b/include/configs/v38b.h
new file mode 100644
index 0000000..cf2d031
--- /dev/null
+++ b/include/configs/v38b.h
@@ -0,0 +1,343 @@
+/*
+ * (C) Copyright 2003-2006 Wolfgang Denk, DENX Software Engineering,
+ * wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this project.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_MPC5xxx			1	/* This is an MPC5xxx CPU */
+#define CONFIG_MPC5200			1	/* This is an MPC5200 CPU */
+#define CONFIG_V38B			1	/* ...on V38B board */
+#define CFG_MPC5XXX_CLKIN	33000000	/* ...running at 33.000000MHz */
+
+#define CONFIG_RTC_PCF8563		1	/* has PCF8563 RTC */
+#define CONFIG_MPC5200_DDR		1	/* has DDR SDRAM */
+
+#define CONFIG_HW_WATCHDOG		1	/* has watchdog */
+
+#define CONFIG_NETCONSOLE		1
+
+#define CONFIG_BOARD_EARLY_INIT_R	1	/* do board-specific init */
+
+#define CFG_XLB_PIPELINING		1	/* gives better performance */
+
+#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH  */
+#define BOOTFLAG_WARM		0x02	/* Software reboot */
+
+#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#endif
+
+/*
+ * Serial console configuration
+ */
+#define CONFIG_PSC_CONSOLE	1	/* console is on PSC1 */
+#define CONFIG_BAUDRATE		115200	/* ... at 115200 bps */
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+
+/*
+ * DDR
+ */
+#define SDRAM_DDR		1	/* is DDR */
+/* Settings for XLB = 132 MHz */
+#define SDRAM_MODE		0x018D0000
+#define SDRAM_EMODE		0x40090000
+#define SDRAM_CONTROL		0x704f0f00
+#define SDRAM_CONFIG1		0x73722930
+#define SDRAM_CONFIG2		0x47770000
+#define SDRAM_TAPDELAY		0x10000000
+
+/*
+ * PCI - no suport
+ */
+#undef CONFIG_PCI
+
+/*
+ * Partitions
+ */
+#define CONFIG_MAC_PARTITION	1
+#define CONFIG_DOS_PARTITION	1
+
+/*
+ * USB
+ */
+#define CONFIG_USB_OHCI
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_CLOCK	0x0001BBBB
+#define CONFIG_USB_CONFIG	0x00001000
+
+/*
+ * Supported commands
+ */
+#define CONFIG_COMMANDS		(CONFIG_CMD_DFL	| \
+				 CFG_CMD_FAT	| \
+				 CFG_CMD_I2C	| \
+				 CFG_CMD_IDE	| \
+				 CFG_CMD_PING	| \
+				 CFG_CMD_DHCP	| \
+				 CFG_CMD_DIAG	| \
+				 CFG_CMD_IRQ	| \
+				 CFG_CMD_JFFS2	| \
+				 CFG_CMD_MII	| \
+				 CFG_CMD_SDRAMi	| \
+				 CFG_CMD_DATE	| \
+				 CFG_CMD_USB	| \
+				 CFG_CMD_FAT)
+
+#define CONFIG_TIMESTAMP		/* Print image info with timestamp */
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * Boot low with 16 MB Flash
+ */
+#define CFG_LOWBOOT		1
+#define CFG_LOWBOOT16		1
+
+/*
+ * Autobooting
+ */
+#define CONFIG_BOOTDELAY	3	/* autoboot after 3 seconds */
+
+#define CONFIG_PREBOOT	"echo;"	\
+	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+	"echo"
+
+#undef CONFIG_BOOTARGS
+
+#define CONFIG_EXTRA_ENV_SETTINGS					\
+	"bootcmd=run net_nfs\0"						\
+	"bootdelay=3\0"							\
+	"baudrate=115200\0"						\
+	"preboot=echo;echo Type \"run flash_nfs\" to mount root "	\
+		"filesystem over NFS; echo\0"				\
+	"netdev=eth0\0"							\
+	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+	"addip=setenv bootargs $(bootargs) "				\
+		"ip=$(ipaddr):$(serverip):$(gatewayip):"		\
+		"$(netmask):$(hostname):$(netdev):off panic=1\0"	\
+	"flash_nfs=run nfsargs addip;bootm $(kernel_addr)\0"		\
+	"flash_self=run ramargs addip;bootm $(kernel_addr) "		\
+		"$(ramdisk_addr)\0"					\
+	"net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0"	\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+		"nfsroot=$(serverip):$(rootpath)\0"			\
+	"hostname=v38b\0"						\
+	"ethact=FEC ETHERNET\0"						\
+	"rootpath=/opt/eldk-3.1.1/ppc_6xx\0"				\
+	"update=prot off ff000000 ff03ffff; era ff000000 ff03ffff; "	\
+		"cp.b 200000 ff000000 $(filesize);"			\
+		"prot on ff000000 ff03ffff\0"				\
+	"load=tftp 200000 $(u-boot)\0"					\
+	"netmask=255.255.0.0\0"						\
+	"ipaddr=192.168.160.18\0"					\
+	"serverip=192.168.1.1\0"					\
+	"ethaddr=00:e0:ee:00:05:2e\0"					\
+	"bootfile=/tftpboot/v38b/uImage\0"				\
+	"u-boot=/tftpboot/v38b/u-boot.bin\0"				\
+	""
+
+#define CONFIG_BOOTCOMMAND	"run net_nfs"
+
+#if defined(CONFIG_MPC5200)
+/*
+ * IPB Bus clocking configuration.
+ */
+#undef CFG_IPBSPEED_133			/* define for 133MHz speed */
+#endif
+
+/*
+ * I2C configuration
+ */
+#define CONFIG_HARD_I2C		1	/* I2C with hardware support */
+#define CFG_I2C_MODULE		2	/* Select I2C module #1 or #2 */
+#define CFG_I2C_SPEED		100000	/* 100 kHz */
+#define CFG_I2C_SLAVE		0x7F
+
+/*
+ * EEPROM configuration
+ */
+#define CFG_I2C_EEPROM_ADDR		0x50	/* 1010000x */
+#define CFG_I2C_EEPROM_ADDR_LEN		1
+#define CFG_EEPROM_PAGE_WRITE_BITS	3
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	70
+
+/*
+ * RTC configuration
+ */
+#define CFG_I2C_RTC_ADDR		0x51
+
+/*
+ * Flash configuration - use CFI driver
+ */
+#define CFG_FLASH_CFI		1		/* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER	1		/* Use the common driver */
+#define CFG_FLASH_CFI_AMD_RESET	1
+#define CFG_FLASH_BASE		0xFF000000
+#define CFG_MAX_FLASH_BANKS	1		/* max num of flash banks */
+#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+#define CFG_FLASH_SIZE		0x01000000	/* 16 MiB */
+#define CFG_MAX_FLASH_SECT	256		/* max num of sects on one chip */
+#define CFG_FLASH_USE_BUFFER_WRITE	1	/* flash write speed-up */
+
+/*
+ * Environment settings
+ */
+#define CFG_ENV_IS_IN_FLASH	1
+#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x00040000)
+#define CFG_ENV_SIZE		0x10000
+#define CFG_ENV_SECT_SIZE	0x10000
+#define CONFIG_ENV_OVERWRITE	1
+
+/*
+ * Memory map
+ */
+#define CFG_MBAR		0xF0000000
+#define CFG_SDRAM_BASE		0x00000000
+#define CFG_DEFAULT_MBAR	0x80000000
+
+/* Use SRAM until RAM will be available */
+#define CFG_INIT_RAM_ADDR	MPC5XXX_SRAM
+#define CFG_INIT_RAM_END	MPC5XXX_SRAM_SIZE	/* End of used area in DPRAM */
+
+#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_BASE	TEXT_BASE
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#   define CFG_RAMBOOT		1
+#endif
+
+#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256kB for Monitor */
+#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128kB for malloc() */
+#define CFG_BOOTMAPSZ		(8 << 20)	/* Linux initial memory map */
+
+/*
+ * Ethernet configuration
+ */
+#define CONFIG_MPC5xxx_FEC	1
+#define CONFIG_PHY_ADDR		0x00
+#define CONFIG_MII		1
+
+/*
+ * GPIO configuration
+ */
+#define CFG_GPS_PORT_CONFIG	0x90000404
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP			/* undef to save memory */
+#define CFG_PROMPT		"=> "	/* Monitor Command Prompt */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE		1024	/* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE		256	/* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
+#define CFG_MAXARGS		16		/* max number of command args */
+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START	0x00100000	/* memtest works on */
+#define CFG_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM */
+
+#define CFG_LOAD_ADDR		0x100000	/* default load address */
+
+#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+
+/*
+ * Various low-level settings
+ */
+#define CFG_HID0_INIT		HID0_ICE | HID0_ICFI
+#define CFG_HID0_FINAL		HID0_ICE
+
+#define CFG_BOOTCS_START	CFG_FLASH_BASE
+#define CFG_BOOTCS_SIZE		CFG_FLASH_SIZE
+#define CFG_BOOTCS_CFG		0x00047801
+#define CFG_CS0_START		CFG_FLASH_BASE
+#define CFG_CS0_SIZE		CFG_FLASH_SIZE
+
+#define CFG_CS_BURST		0x00000000
+#define CFG_CS_DEADCYCLE	0x33333333
+
+#define CFG_RESET_ADDRESS	0xff000000
+
+/*
+ * IDE/ATA (supports IDE harddisk)
+ */
+#undef CONFIG_IDE_8xx_PCCARD		/* Don't use IDE with PC Card Adapter */
+#undef CONFIG_IDE_8xx_DIRECT		/* Direct IDE not supported */
+#undef CONFIG_IDE_LED			/* LED for ide not supported */
+
+#define CONFIG_IDE_RESET		/* reset for ide supported */
+#define CONFIG_IDE_PREINIT
+
+#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus */
+#define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus */
+
+#define CFG_ATA_IDE0_OFFSET	0x0000
+
+#define CFG_ATA_BASE_ADDR	MPC5XXX_ATA
+
+#define CFG_ATA_DATA_OFFSET	(0x0060)	/* data I/O offset */
+
+#define CFG_ATA_REG_OFFSET	(CFG_ATA_DATA_OFFSET)	/* normal register accesses offset */
+
+#define CFG_ATA_ALT_OFFSET	(0x005C)	/* alternate registers offset */
+
+#define CFG_ATA_STRIDE		4		/* Interval between registers */
+
+/*
+ * Status LED
+ */
+#define  CONFIG_STATUS_LED		/* Status LED enabled */
+#define  CONFIG_BOARD_SPECIFIC_LED	/* version has board specific leds */
+
+#define CFG_LED_BASE	MPC5XXX_GPT7_ENABLE	/* Timer 7 GPIO */
+#ifndef __ASSEMBLY__
+typedef unsigned int led_id_t;
+
+#define __led_toggle(_msk) \
+	do { \
+		*((volatile long *) (CFG_LED_BASE)) ^= (_msk); \
+	} while(0)
+
+#define __led_set(_msk, _st) \
+	do { \
+		if ((_st)) \
+			*((volatile long *) (CFG_LED_BASE)) &= ~(_msk); \
+		else \
+			*((volatile long *) (CFG_LED_BASE)) |= (_msk); \
+	} while(0)
+
+#define __led_init(_msk, st) \
+	do { \
+		*((volatile long *) (CFG_LED_BASE)) |= 0x34; \
+	} while(0)
+#endif /* __ASSEMBLY__ */
+
+#endif /* __CONFIG_H */