Merge 'next' branch

Conflicts:

	board/freescale/mpc8536ds/mpc8536ds.c
	include/configs/mgcoge.h

Signed-off-by: Wolfgang Denk <wd@denx.de>

1 files changed, 131 insertions, 131 deletions

diff --git a/include/configs/utx8245.h b/include/configs/utx8245.h
index 4355e1c..6e9c27c 100644
--- a/include/configs/utx8245.h
+++ b/include/configs/utx8245.h
@@ -55,7 +55,7 @@
 
 #define CONFIG_CONS_INDEX	1
 #define CONFIG_BAUDRATE		57600
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 #define CONFIG_BOOTDELAY	2
 #define CONFIG_AUTOBOOT_PROMPT	"autoboot in %d seconds\n", bootdelay
@@ -63,7 +63,7 @@
 #define CONFIG_BOOTARGS		"root=/dev/ram console=ttyS0,57600" /* RAMdisk */
 #define CONFIG_ETHADDR		00:AA:00:14:00:05	/* UTX5 */
 #define CONFIG_SERVERIP		10.8.17.105	/* Spree */
-#define CFG_TFTP_LOADADDR	10000
+#define CONFIG_SYS_TFTP_LOADADDR	10000
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"kernel_addr=FFA00000\0" \
@@ -121,16 +121,16 @@ protect on ${u-boot_startaddr} ${u-boot_endaddr}"
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP				/* undef to save memory		*/
-#define CFG_PROMPT	"=> "			/* Monitor Command Prompt	*/
-#define CFG_CBSIZE	256				/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_LONGHELP				/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=> "			/* Monitor Command Prompt	*/
+#define CONFIG_SYS_CBSIZE	256				/* Console I/O Buffer Size	*/
 
 /* Print Buffer Size */
-#define CFG_PBSIZE	(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
+#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 
-#define	CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
-#define CFG_LOAD_ADDR	0x00100000	/* Default load address		*/
+#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_LOAD_ADDR	0x00100000	/* Default load address		*/
 
 
 /*-----------------------------------------------------------------------
@@ -142,7 +142,7 @@ protect on ${u-boot_startaddr} ${u-boot_endaddr}"
 #define CONFIG_PCI_SCAN_SHOW
 #define CONFIG_NET_MULTI
 #define CONFIG_EEPRO100
-#define CFG_RX_ETH_BUFFER	8               /* use 8 rx buffer on eepro100  */
+#define CONFIG_SYS_RX_ETH_BUFFER	8               /* use 8 rx buffer on eepro100  */
 #define CONFIG_EEPRO100_SROM_WRITE
 
 #define PCI_ENET0_IOADDR	0xF0000000
@@ -161,61 +161,61 @@ protect on ${u-boot_startaddr} ${u-boot_endaddr}"
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE	    0x00000000
-#define CFG_MAX_RAM_SIZE    0x10000000	/* 256MB  */
-/*#define CFG_VERY_BIG_RAM	1 */
+#define CONFIG_SYS_SDRAM_BASE	    0x00000000
+#define CONFIG_SYS_MAX_RAM_SIZE    0x10000000	/* 256MB  */
+/*#define CONFIG_SYS_VERY_BIG_RAM	1 */
 
 /* FLASH_BASE is FF800000, with 4MB on RCS0, but the reset vector
  * is actually located at FFF00100.  Therefore, U-Boot is
  * physically located at 0xFFB0_0000, but is also mirrored at
  * 0xFFF0_0000.
  */
-#define CFG_RESET_ADDRESS   0xFFF00100
+#define CONFIG_SYS_RESET_ADDRESS   0xFFF00100
 
-#define CFG_EUMB_ADDR	    0xFC000000
+#define CONFIG_SYS_EUMB_ADDR	    0xFC000000
 
-#define CFG_MONITOR_BASE    TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE    TEXT_BASE
 
-#define CFG_MONITOR_LEN	    (256 << 10) /* Reserve 256 kB for Monitor	*/
-#define CFG_MALLOC_LEN	    (128 << 10) /* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_MONITOR_LEN	    (256 << 10) /* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN	    (128 << 10) /* Reserve 128 kB for malloc()	*/
 
-/*#define CFG_DRAM_TEST		1 */
-#define CFG_MEMTEST_START   0x00003000	/* memtest works on	0...256 MB	*/
-#define CFG_MEMTEST_END	    0x0ff8ffa7	/* in SDRAM, skips exception */
+/*#define CONFIG_SYS_DRAM_TEST		1 */
+#define CONFIG_SYS_MEMTEST_START   0x00003000	/* memtest works on	0...256 MB	*/
+#define CONFIG_SYS_MEMTEST_END	    0x0ff8ffa7	/* in SDRAM, skips exception */
 										/* vectors and U-Boot */
 
 
 /*--------------------------------------------------------------------
  * Definitions for initial stack pointer and data area
  *------------------------------------------------------------------*/
-#define CFG_INIT_DATA_SIZE    128	/* Size in bytes reserved for */
+#define CONFIG_SYS_INIT_DATA_SIZE    128	/* Size in bytes reserved for */
 									/* initial data */
-#define CFG_INIT_RAM_ADDR     0x40000000
-#define CFG_INIT_RAM_END      0x1000
-#define CFG_INIT_DATA_OFFSET  (CFG_INIT_RAM_END - CFG_INIT_DATA_SIZE)
-#define CFG_GBL_DATA_SIZE	128
-#define CFG_GBL_DATA_OFFSET  (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_ADDR     0x40000000
+#define CONFIG_SYS_INIT_RAM_END      0x1000
+#define CONFIG_SYS_INIT_DATA_OFFSET  (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_INIT_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_SIZE	128
+#define CONFIG_SYS_GBL_DATA_OFFSET  (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 
 /*--------------------------------------------------------------------
  * NS16550 Configuration
  *------------------------------------------------------------------*/
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
 
-#define CFG_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_REG_SIZE	1
 
 #if (CONFIG_CONS_INDEX == 1 || CONFIG_CONS_INDEX == 2)
-#	define CFG_NS16550_CLK		get_bus_freq(0)
+#	define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
 #else
-#	define CFG_NS16550_CLK 33000000
+#	define CONFIG_SYS_NS16550_CLK 33000000
 #endif
 
-#define CFG_NS16550_COM1	(CFG_EUMB_ADDR + 0x4500)
-#define CFG_NS16550_COM2	(CFG_EUMB_ADDR + 0x4600)
-#define CFG_NS16550_COM3	0xFF000000
-#define CFG_NS16550_COM4	0xFF000008
+#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_EUMB_ADDR + 0x4500)
+#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_EUMB_ADDR + 0x4600)
+#define CONFIG_SYS_NS16550_COM3	0xFF000000
+#define CONFIG_SYS_NS16550_COM4	0xFF000008
 
 /*--------------------------------------------------------------------
  * Low Level Configuration Settings
@@ -225,10 +225,10 @@ protect on ${u-boot_startaddr} ${u-boot_endaddr}"
  *------------------------------------------------------------------*/
 
 #define CONFIG_SYS_CLK_FREQ  33000000
-#define CFG_HZ				1000
+#define CONFIG_SYS_HZ				1000
 
-/*#define CFG_ETH_DEV_FN	     0x7800 */
-/*#define CFG_ETH_IOBASE	     0x00104000 */
+/*#define CONFIG_SYS_ETH_DEV_FN	     0x7800 */
+/*#define CONFIG_SYS_ETH_IOBASE	     0x00104000 */
 
 /*--------------------------------------------------------------------
  * I2C Configuration
@@ -236,13 +236,13 @@ protect on ${u-boot_startaddr} ${u-boot_endaddr}"
 #if 1
 #define CONFIG_HARD_I2C		1		/* To enable I2C support	*/
 #undef  CONFIG_SOFT_I2C				/* I2C bit-banged		*/
-#define CFG_I2C_SPEED		400000		/* I2C speed and slave address	*/
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		400000		/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 #endif
 
 #define CONFIG_RTC_PCF8563	1		/* enable I2C support for */
 									/* Philips PCF8563 RTC */
-#define CFG_I2C_RTC_ADDR	0x51	/* Philips PCF8563 RTC address */
+#define CONFIG_SYS_I2C_RTC_ADDR	0x51	/* Philips PCF8563 RTC address */
 
 /*--------------------------------------------------------------------
  *	Memory Control Configuration Register values
@@ -250,59 +250,59 @@ protect on ${u-boot_startaddr} ${u-boot_endaddr}"
  *------------------------------------------------------------------*/
 
 /**** MCCR1 ****/
-#define CFG_ROMNAL	    0
-#define CFG_ROMFAL	    10		/* (tacc=70ns)*mem_freq - 2,
+#define CONFIG_SYS_ROMNAL	    0
+#define CONFIG_SYS_ROMFAL	    10		/* (tacc=70ns)*mem_freq - 2,
 									mem_freq = 100MHz */
 
-#define CFG_BANK7_ROW	0		/* SDRAM bank 7-0 row address */
-#define CFG_BANK6_ROW	0		/*	bit count */
-#define CFG_BANK5_ROW	0
-#define CFG_BANK4_ROW	0
-#define CFG_BANK3_ROW	0
-#define CFG_BANK2_ROW	0
-#define CFG_BANK1_ROW	2
-#define CFG_BANK0_ROW	2
+#define CONFIG_SYS_BANK7_ROW	0		/* SDRAM bank 7-0 row address */
+#define CONFIG_SYS_BANK6_ROW	0		/*	bit count */
+#define CONFIG_SYS_BANK5_ROW	0
+#define CONFIG_SYS_BANK4_ROW	0
+#define CONFIG_SYS_BANK3_ROW	0
+#define CONFIG_SYS_BANK2_ROW	0
+#define CONFIG_SYS_BANK1_ROW	2
+#define CONFIG_SYS_BANK0_ROW	2
 
 /**** MCCR2, refresh interval clock cycles ****/
-#define CFG_REFINT	    480	    /* 33 MHz SDRAM clock was 480 */
+#define CONFIG_SYS_REFINT	    480	    /* 33 MHz SDRAM clock was 480 */
 
 /* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4. */
-#define CFG_BSTOPRE	    1023	/* burst to precharge[0..9], */
+#define CONFIG_SYS_BSTOPRE	    1023	/* burst to precharge[0..9], */
 								/* sets open page interval */
 
 /**** MCCR3 ****/
-#define CFG_REFREC	    7	    /* Refresh to activate interval, trc */
+#define CONFIG_SYS_REFREC	    7	    /* Refresh to activate interval, trc */
 
 /**** MCCR4 ****/
-#define CFG_PRETOACT	    2	    /* trp */
-#define CFG_ACTTOPRE	    7	    /* trcd + (burst length - 1) + trdl */
-#define CFG_SDMODE_CAS_LAT  3	    /* SDMODE CAS latancy */
-#define CFG_SDMODE_WRAP	    0	    /* SDMODE wrap type, sequential */
-#define CFG_ACTORW		2		/* trcd min */
-#define CFG_DBUS_SIZE2		1		/* set for 8-bit RCS1, clear for 32,64 */
-#define CFG_REGISTERD_TYPE_BUFFER 1
-#define CFG_EXTROM	    0			/* we don't need extended ROM space */
-#define CFG_REGDIMM	    0
+#define CONFIG_SYS_PRETOACT	    2	    /* trp */
+#define CONFIG_SYS_ACTTOPRE	    7	    /* trcd + (burst length - 1) + trdl */
+#define CONFIG_SYS_SDMODE_CAS_LAT  3	    /* SDMODE CAS latancy */
+#define CONFIG_SYS_SDMODE_WRAP	    0	    /* SDMODE wrap type, sequential */
+#define CONFIG_SYS_ACTORW		2		/* trcd min */
+#define CONFIG_SYS_DBUS_SIZE2		1		/* set for 8-bit RCS1, clear for 32,64 */
+#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1
+#define CONFIG_SYS_EXTROM	    0			/* we don't need extended ROM space */
+#define CONFIG_SYS_REGDIMM	    0
 
 /* calculate according to formula in sec. 6-22 of 8245 UM */
-#define CFG_PGMAX           50		/* how long the 8245 retains the */
+#define CONFIG_SYS_PGMAX           50		/* how long the 8245 retains the */
 									/* currently accessed page in memory */
 									/* was 45 */
 
-#define CFG_SDRAM_DSCD	0x20	/* SDRAM data in sample clock delay - note */
+#define CONFIG_SYS_SDRAM_DSCD	0x20	/* SDRAM data in sample clock delay - note */
 								/* bits 7,6, and 3-0 MUST be 0 */
 
 #if 0
-#define CFG_DLL_MAX_DELAY	0x04
+#define CONFIG_SYS_DLL_MAX_DELAY	0x04
 #else
-#define CFG_DLL_MAX_DELAY	0
+#define CONFIG_SYS_DLL_MAX_DELAY	0
 #endif
 #if 0							/* need for 33MHz SDRAM */
-#define CFG_DLL_EXTEND	0x80
+#define CONFIG_SYS_DLL_EXTEND	0x80
 #else
-#define CFG_DLL_EXTEND	0
+#define CONFIG_SYS_DLL_EXTEND	0
 #endif
-#define CFG_PCI_HOLD_DEL 0x20
+#define CONFIG_SYS_PCI_HOLD_DEL 0x20
 
 
 /* Memory bank settings.
@@ -312,94 +312,94 @@ protect on ${u-boot_startaddr} ${u-boot_endaddr}"
  * address. Refer to the MPC8245 user manual.
  */
 
-#define CFG_BANK0_START	    0x00000000
-#define CFG_BANK0_END	    (CFG_MAX_RAM_SIZE/2 - 1)
-#define CFG_BANK0_ENABLE    1
-#define CFG_BANK1_START	    CFG_MAX_RAM_SIZE/2
-#define CFG_BANK1_END	    (CFG_MAX_RAM_SIZE - 1)
-#define CFG_BANK1_ENABLE    1
-#define CFG_BANK2_START	    0x3ff00000		/* not available in this design */
-#define CFG_BANK2_END	    0x3fffffff
-#define CFG_BANK2_ENABLE    0
-#define CFG_BANK3_START	    0x3ff00000
-#define CFG_BANK3_END	    0x3fffffff
-#define CFG_BANK3_ENABLE    0
-#define CFG_BANK4_START	    0x3ff00000
-#define CFG_BANK4_END	    0x3fffffff
-#define CFG_BANK4_ENABLE    0
-#define CFG_BANK5_START	    0x3ff00000
-#define CFG_BANK5_END	    0x3fffffff
-#define CFG_BANK5_ENABLE    0
-#define CFG_BANK6_START	    0x3ff00000
-#define CFG_BANK6_END	    0x3fffffff
-#define CFG_BANK6_ENABLE    0
-#define CFG_BANK7_START	    0x3ff00000
-#define CFG_BANK7_END	    0x3fffffff
-#define CFG_BANK7_ENABLE    0
+#define CONFIG_SYS_BANK0_START	    0x00000000
+#define CONFIG_SYS_BANK0_END	    (CONFIG_SYS_MAX_RAM_SIZE/2 - 1)
+#define CONFIG_SYS_BANK0_ENABLE    1
+#define CONFIG_SYS_BANK1_START	    CONFIG_SYS_MAX_RAM_SIZE/2
+#define CONFIG_SYS_BANK1_END	    (CONFIG_SYS_MAX_RAM_SIZE - 1)
+#define CONFIG_SYS_BANK1_ENABLE    1
+#define CONFIG_SYS_BANK2_START	    0x3ff00000		/* not available in this design */
+#define CONFIG_SYS_BANK2_END	    0x3fffffff
+#define CONFIG_SYS_BANK2_ENABLE    0
+#define CONFIG_SYS_BANK3_START	    0x3ff00000
+#define CONFIG_SYS_BANK3_END	    0x3fffffff
+#define CONFIG_SYS_BANK3_ENABLE    0
+#define CONFIG_SYS_BANK4_START	    0x3ff00000
+#define CONFIG_SYS_BANK4_END	    0x3fffffff
+#define CONFIG_SYS_BANK4_ENABLE    0
+#define CONFIG_SYS_BANK5_START	    0x3ff00000
+#define CONFIG_SYS_BANK5_END	    0x3fffffff
+#define CONFIG_SYS_BANK5_ENABLE    0
+#define CONFIG_SYS_BANK6_START	    0x3ff00000
+#define CONFIG_SYS_BANK6_END	    0x3fffffff
+#define CONFIG_SYS_BANK6_ENABLE    0
+#define CONFIG_SYS_BANK7_START	    0x3ff00000
+#define CONFIG_SYS_BANK7_END	    0x3fffffff
+#define CONFIG_SYS_BANK7_ENABLE    0
 
 /*--------------------------------------------------------------------*/
 /* 4.4 - Output Driver Control Register */
 /*--------------------------------------------------------------------*/
-#define CFG_ODCR	    0xe5
+#define CONFIG_SYS_ODCR	    0xe5
 
 /*--------------------------------------------------------------------*/
 /* 4.8 - Error Handling Registers */
-/*-------------------------------CFG_SDMODE_BURSTLEN-------------------------------------*/
-#define CFG_ERRENR1	0x11	/* enable SDRAM refresh overflow error */
+/*-------------------------------CONFIG_SYS_SDMODE_BURSTLEN-------------------------------------*/
+#define CONFIG_SYS_ERRENR1	0x11	/* enable SDRAM refresh overflow error */
 
 /* SDRAM 0-256 MB */
-#define CFG_IBAT0L  (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-/*#define CFG_IBAT0L  (CFG_SDRAM_BASE | BATL_PP_10 | BATL_CACHEINHIBIT) */
-#define CFG_IBAT0U  (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT0L  (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+/*#define CONFIG_SYS_IBAT0L  (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_CACHEINHIBIT) */
+#define CONFIG_SYS_IBAT0U  (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 
 /* stack in dcache */
-#define CFG_IBAT1L  (CFG_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT1U  (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT1L  (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT1U  (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
 
 
-#define CFG_IBAT2L  (CFG_SDRAM_BASE + 0x10000000 | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT2U  (CFG_SDRAM_BASE + 0x10000000| BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT2L  (CONFIG_SYS_SDRAM_BASE + 0x10000000 | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT2U  (CONFIG_SYS_SDRAM_BASE + 0x10000000| BATU_BL_256M | BATU_VS | BATU_VP)
 
 /* PCI memory */
-/*#define CFG_IBAT2L  (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT) */
-/*#define CFG_IBAT2U  (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP) */
+/*#define CONFIG_SYS_IBAT2L  (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT) */
+/*#define CONFIG_SYS_IBAT2U  (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP) */
 
 /*Flash, config addrs, etc. */
-#define CFG_IBAT3L  (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_IBAT3U  (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CFG_DBAT0L  CFG_IBAT0L
-#define CFG_DBAT0U  CFG_IBAT0U
-#define CFG_DBAT1L  CFG_IBAT1L
-#define CFG_DBAT1U  CFG_IBAT1U
-#define CFG_DBAT2L  CFG_IBAT2L
-#define CFG_DBAT2U  CFG_IBAT2U
-#define CFG_DBAT3L  CFG_IBAT3L
-#define CFG_DBAT3U  CFG_IBAT3U
+#define CONFIG_SYS_IBAT3L  (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT3U  (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_DBAT0L  CONFIG_SYS_IBAT0L
+#define CONFIG_SYS_DBAT0U  CONFIG_SYS_IBAT0U
+#define CONFIG_SYS_DBAT1L  CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U  CONFIG_SYS_IBAT1U
+#define CONFIG_SYS_DBAT2L  CONFIG_SYS_IBAT2L
+#define CONFIG_SYS_DBAT2U  CONFIG_SYS_IBAT2U
+#define CONFIG_SYS_DBAT3L  CONFIG_SYS_IBAT3L
+#define CONFIG_SYS_DBAT3U  CONFIG_SYS_IBAT3U
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ	    (8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ	    (8 << 20)	/* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  *----------------------------------------------------------------------*/
-#define CFG_FLASH_BASE	    0xFF800000
-#define CFG_MAX_FLASH_BANKS	1			/* Max number of flash banks */
+#define CONFIG_SYS_FLASH_BASE	    0xFF800000
+#define CONFIG_SYS_MAX_FLASH_BANKS	1			/* Max number of flash banks */
 
 /*	NOTE: environment is not EMBEDDED in the u-boot code.
 	It's stored in flash in its own separate sector.  */
 #define CONFIG_ENV_IS_IN_FLASH	    1
 
 #if 1	/* AMD AM29LV033C */
-#define CFG_MAX_FLASH_SECT	64		/* Max number of sectors in one bank */
+#define CONFIG_SYS_MAX_FLASH_SECT	64		/* Max number of sectors in one bank */
 #define CONFIG_ENV_ADDR		0xFFBF0000	/* flash sector SA63 */
 #define CONFIG_ENV_SECT_SIZE	(64*1024)	/* Size of the Environment Sector */
 #else	/* AMD AM29LV116D */
-#define CFG_MAX_FLASH_SECT	35	/* Max number of sectors in one bank */
+#define CONFIG_SYS_MAX_FLASH_SECT	35	/* Max number of sectors in one bank */
 #define CONFIG_ENV_ADDR		0xFF9FA000	/* flash sector SA33 */
 #define CONFIG_ENV_SECT_SIZE	(8*1024)	/* Size of the Environment Sector */
 #endif /* #if */
@@ -407,22 +407,22 @@ protect on ${u-boot_startaddr} ${u-boot_endaddr}"
 #define CONFIG_ENV_SIZE		CONFIG_ENV_SECT_SIZE		/* Size of the Environment */
 #define CONFIG_ENV_OFFSET		0			/* starting right at the beginning */
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500		/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500		/* Timeout for Flash Write (in ms)	*/
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
-#undef CFG_RAMBOOT
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
+#undef CONFIG_SYS_RAMBOOT
 #else
-#define CFG_RAMBOOT
+#define CONFIG_SYS_RAMBOOT
 #endif
 
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	32
+#define CONFIG_SYS_CACHELINE_SIZE	32
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
+#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
 #endif
 
 /*