* Patch by Marc Singer, 29 May 2003:

  Fixed rarp boot method for IA32 and other little-endian CPUs.

* Patch by Marc Singer, 28 May 2003:
  Added port I/O commands.

* Patch by Matthew McClintock, 28 May 2003
  - cpu/mpc824x/start.S: fix relocation code when booting from RAM
  - minor patches for utx8245

* Patch by Daniel Engström, 28 May 2003:
  x86 update

* Patch by Dave Ellis, 9 May 2003 + 27 May 2003:
  add nand flash support to SXNI855T configuration
  fix/extend nand flash support:
  - fix 'nand erase' command so does not erase bad blocks
  - fix 'nand write' command so does not write to bad blocks
  - fix nand_probe() so handles no flash detected properly
  - add doc/README.nand
  - add .jffs2 and .oob options to nand read/write
  - add 'nand bad' command to list bad blocks
  - add 'clean' option to 'nand erase' to write JFFS2 clean markers
  - make NAND read/write faster

* Patch by Rune Torgersen, 23 May 2003:
  Update for MPC8266ADS board

1 files changed, 132 insertions, 59 deletions

diff --git a/include/configs/utx8245.h b/include/configs/utx8245.h
index 5aec47a..80cfe8a 100644
--- a/include/configs/utx8245.h
+++ b/include/configs/utx8245.h
@@ -51,16 +51,39 @@
 #define CONFIG_UTX8245		1
 #define DEBUG				1
 
+#define CONFIG_IDENT_STRING     " [UTX5] "
+
 #define CONFIG_CONS_INDEX	1
 #define CONFIG_BAUDRATE		57600
 #define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
-#define CONFIG_BOOTDELAY	5
+#define CONFIG_BOOTDELAY	2
 #define CONFIG_AUTOBOOT_PROMPT 	"autoboot in %d seconds\n"
-#define CONFIG_BOOTCOMMAND	"bootm FF920000 FF800000"	/* autoboot command	*/
+#define CONFIG_BOOTCOMMAND	"run nfsboot"	/* autoboot command	*/
 #define CONFIG_BOOTARGS		"root=/dev/ram console=ttyS0,57600" /* RAMdisk */
-#define CONFIG_ETHADDR		41:52:4c:61:00:01	/* MAC address */
-#define CONFIG_SERVERIP		10.8.17.105
+#define CONFIG_ETHADDR		00:AA:00:14:00:05	/* UTX5 */
+#define CONFIG_SERVERIP		10.8.17.105	/* Spree */
+#define CFG_TFTP_LOADADDR	10000
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"kernel_addr=FFA00000\0" \
+	"ramdisk_addr=FF800000\0" \
+	"u-boot_startaddr=FFB00000\0" \
+	"u-boot_endaddr=FFB2FFFF\0" \
+	"nfsargs=setenv bootargs console=ttyS0,$(baudrate) root=/dev/nfs rw \
+nfsroot=$(nfsrootip):$(rootpath) ip=dhcp\0" \
+	"ramargs=setenv bootargs console=ttyS0,$(baudrate) root=/dev/ram0\0" \
+	"smargs=setenv bootargs console=ttyS0,$(baudrate) root=/dev/mtdblock1 ro\0" \
+	"fwargs=setenv bootargs console=ttyS0,$(baudrate) root=/dev/sda2 ro\0" \
+	"nfsboot=run nfsargs;bootm $(kernel_addr)\0" \
+	"ramboot=run ramargs;bootm $(kernel_addr) $(ramdisk_addr)\0" \
+	"smboot=run smargs;bootm $(kernel_addr) $(ramdisk_addr)\0" \
+	"fwboot=run fwargs;bootm $(kernel_addr) $(ramdisk_addr)\0" \
+	"update_u-boot=tftp $(loadaddr) /bdi2000/u-boot.bin;protect off \
+$(u-boot_startaddr) $(u-boot_endaddr);era $(u-boot_startaddr) \
+$(u-boot_endaddr);cp.b $(loadaddr) $(u-boot_startaddr) $(filesize);\
+protect on $(u-boot_startaddr) $(u-boot_endaddr)"
+
 #define CONFIG_ENV_OVERWRITE
 
 #define CONFIG_COMMANDS		(CFG_CMD_DFL | CFG_CMD_BDI | CFG_CMD_PCI \
@@ -70,7 +93,8 @@
 								| CFG_CMD_IMI | CFG_CMD_CACHE \
 								| CFG_CMD_RUN | CFG_CMD_ECHO \
 								| CFG_CMD_REGINFO | CFG_CMD_NET\
-								| CFG_CMD_DHCP)
+								| CFG_CMD_DHCP | CFG_CMD_I2C \
+								| CFG_CMD_DATE)
 
 /* This must be included AFTER the definition of CONFIG_COMMANDS (if any)
  */
@@ -80,9 +104,9 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CFG_LONGHELP				/* undef to save memory		*/
+#define CFG_PROMPT	"=> "			/* Monitor Command Prompt	*/
+#define CFG_CBSIZE	256				/* Console I/O Buffer Size	*/
 
 /* Print Buffer Size */
 #define CFG_PBSIZE	(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
@@ -101,12 +125,20 @@
 #define CONFIG_PCI_SCAN_SHOW
 #define CONFIG_NET_MULTI
 #define CONFIG_EEPRO100
+#define CONFIG_EEPRO100_SROM_WRITE
+
+#define PCI_ENET0_IOADDR	0xF0000000
+#define PCI_ENET0_MEMADDR	0xF0000000
 
-#define PCI_ENET0_IOADDR	0x80000000
+#define PCI_FIREWIRE_IOADDR		0xF1000000
+#define PCI_FIREWIRE_MEMADDR	0xF1000000
+/*
+#define PCI_ENET0_IOADDR	0xFE000000
 #define PCI_ENET0_MEMADDR	0x80000000
+
 #define PCI_FIREWIRE_IOADDR	0x81000000
 #define PCI_FIREWIRE_MEMADDR	0x81000000
-
+*/
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
@@ -114,12 +146,13 @@
  * Please note that CFG_SDRAM_BASE _must_ start at 0
  */
 #define CFG_SDRAM_BASE	    0x00000000
-#define CFG_MAX_RAM_SIZE    0x10000000	/* amount of SDRAM  */
-
+#define CFG_MAX_RAM_SIZE    0x10000000	/* 256MB  */
+/*#define CFG_VERY_BIG_RAM	1 */
 
-/* even though FLASHP_BASE is FF800000, with 2MB on RCS0, the
- * reset vector is actually located at FF800100, but the 8245
- * takes care of us.
+/* FLASH_BASE is FF800000, with 4MB on RCS0, but the reset vector
+ * is actually located at FFF00100.  Therefore, U-Boot is
+ * physically located at 0xFFB0_0000, but is also mirrored at
+ * 0xFFF0_0000.
  */
 #define CFG_RESET_ADDRESS   0xFFF00100
 
@@ -132,17 +165,19 @@
 
 /*#define CFG_DRAM_TEST		1 */
 #define CFG_MEMTEST_START   0x00003000	/* memtest works on	0...256 MB	*/
-#define CFG_MEMTEST_END	    0x0ff8ffa8	/* in SDRAM, skips exception */
+#define CFG_MEMTEST_END	    0x0ff8ffa7	/* in SDRAM, skips exception */
 										/* vectors and U-Boot */
 
 
 /*--------------------------------------------------------------------
  * Definitions for initial stack pointer and data area
  *------------------------------------------------------------------*/
-#define CFG_GBL_DATA_SIZE    128	/* Size in bytes reserved for */
+#define CFG_INIT_DATA_SIZE    128	/* Size in bytes reserved for */
 									/* initial data */
 #define CFG_INIT_RAM_ADDR     0x40000000
 #define CFG_INIT_RAM_END      0x1000
+#define CFG_INIT_DATA_OFFSET  (CFG_INIT_RAM_END - CFG_INIT_DATA_SIZE)
+#define CFG_GBL_DATA_SIZE	128
 #define CFG_GBL_DATA_OFFSET  (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 
 /*--------------------------------------------------------------------
@@ -153,10 +188,16 @@
 
 #define CFG_NS16550_REG_SIZE	1
 
-#define CFG_NS16550_CLK		get_bus_freq(0)
+#if (CONFIG_CONS_INDEX == 1 || CONFIG_CONS_INDEX == 2)
+#	define CFG_NS16550_CLK		get_bus_freq(0)
+#else
+#	define CFG_NS16550_CLK 33000000
+#endif
 
 #define CFG_NS16550_COM1	(CFG_EUMB_ADDR + 0x4500)
 #define CFG_NS16550_COM2	(CFG_EUMB_ADDR + 0x4600)
+#define CFG_NS16550_COM3	0xFF000000
+#define CFG_NS16550_COM4	0xFF000008
 
 /*--------------------------------------------------------------------
  * Low Level Configuration Settings
@@ -168,46 +209,61 @@
 #define CONFIG_SYS_CLK_FREQ  33000000
 #define CFG_HZ				1000
 
-#define CFG_ETH_DEV_FN	     0x7800
-#define CFG_ETH_IOBASE	     0x00104000
+/*#define CFG_ETH_DEV_FN	     0x7800 */
+/*#define CFG_ETH_IOBASE	     0x00104000 */
+
+/*--------------------------------------------------------------------
+ * I2C Configuration
+ *------------------------------------------------------------------*/
+#if 1
+#define CONFIG_HARD_I2C		1		/* To enable I2C support	*/
+#undef  CONFIG_SOFT_I2C				/* I2C bit-banged		*/
+#define CFG_I2C_SPEED		400000		/* I2C speed and slave address	*/
+#define CFG_I2C_SLAVE		0x7F
+#endif
 
+#define CONFIG_RTC_PCF8563	1		/* enable I2C support for */
+									/* Philips PCF8563 RTC */
+#define CFG_I2C_RTC_ADDR	0x51	/* Philips PCF8563 RTC address */
 
 /*--------------------------------------------------------------------
  *	Memory Control Configuration Register values
  *	- see sec. 4.12 of MPC8245 UM
  *------------------------------------------------------------------*/
 
-/* MCCR1 */
+/**** MCCR1 ****/
 #define CFG_ROMNAL	    0
-#define CFG_ROMFAL	    2			/* (tacc=70ns)*mem_freq - 2 */
-#define CFG_BANK0_ROW	2			/* SDRAM bank 7-0 row address */
-#define CFG_BANK1_ROW	2			/* 	bit count */
-#define CFG_BANK2_ROW	0
-#define CFG_BANK3_ROW	0
-#define CFG_BANK4_ROW	0
+#define CFG_ROMFAL	    10		/* (tacc=70ns)*mem_freq - 2,
+									mem_freq = 100MHz */
+
+#define CFG_BANK7_ROW	0		/* SDRAM bank 7-0 row address */
+#define CFG_BANK6_ROW	0		/* 	bit count */
 #define CFG_BANK5_ROW	0
-#define CFG_BANK6_ROW	0
-#define CFG_BANK7_ROW	0
+#define CFG_BANK4_ROW	0
+#define CFG_BANK3_ROW	0
+#define CFG_BANK2_ROW	0
+#define CFG_BANK1_ROW	2
+#define CFG_BANK0_ROW	2
 
-/* MCCR2, refresh interval clock cycles */
+/**** MCCR2, refresh interval clock cycles ****/
 #define CFG_REFINT	    480	    /* 33 MHz SDRAM clock was 480 */
 
-/* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4 */
+/* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4. */
 #define CFG_BSTOPRE	    1023	/* burst to precharge[0..9], */
 								/* sets open page interval */
 
-/* MCCR3 */
-#define CFG_REFREC	    5	    /* Refresh to activate interval, trc */
+/**** MCCR3 ****/
+#define CFG_REFREC	    7	    /* Refresh to activate interval, trc */
 
-/* MCCR4 */
+/**** MCCR4 ****/
 #define CFG_PRETOACT	    2	    /* trp */
-#define CFG_ACTTOPRE	    7	    /* trcd + (burst length - 1) + tdrl */
+#define CFG_ACTTOPRE	    7	    /* trcd + (burst length - 1) + trdl */
 #define CFG_SDMODE_CAS_LAT  3	    /* SDMODE CAS latancy */
 #define CFG_SDMODE_WRAP	    0	    /* SDMODE wrap type, sequential */
 #define CFG_ACTORW	    	2		/* trcd min */
 #define CFG_DBUS_SIZE2		1		/* set for 8-bit RCS1, clear for 32,64 */
 #define CFG_REGISTERD_TYPE_BUFFER 1
-#define CFG_EXTROM	    1
+#define CFG_EXTROM	    0			/* we don't need extended ROM space */
 #define CFG_REGDIMM	    0
 
 /* calculate according to formula in sec. 6-22 of 8245 UM */
@@ -216,10 +272,18 @@
 									/* was 45 */
 
 #define CFG_SDRAM_DSCD	0x20	/* SDRAM data in sample clock delay - note */
-								/* bottom 3 bits MUST be 0 */
+								/* bits 7,6, and 3-0 MUST be 0 */
 
+#if 0
 #define CFG_DLL_MAX_DELAY	0x04
+#else
+#define CFG_DLL_MAX_DELAY	0
+#endif
+#if 0							/* need for 33MHz SDRAM */
 #define CFG_DLL_EXTEND	0x80
+#else
+#define CFG_DLL_EXTEND	0
+#endif
 #define CFG_PCI_HOLD_DEL 0x20
 
 
@@ -255,29 +319,34 @@
 #define CFG_BANK7_END	    0x3fffffff
 #define CFG_BANK7_ENABLE    0
 
-/*--------------------------------------------------------------------
- * 4.4 - Output Driver Control Register
- *------------------------------------------------------------------*/
+/*--------------------------------------------------------------------*/
+/* 4.4 - Output Driver Control Register */
+/*--------------------------------------------------------------------*/
 #define CFG_ODCR	    0xe5
 
-/*--------------------------------------------------------------------
- * 4.8 - Error Handling Registers
- *------------------------------------------------------------------*/
+/*--------------------------------------------------------------------*/
+/* 4.8 - Error Handling Registers */
+/*-------------------------------CFG_SDMODE_BURSTLEN-------------------------------------*/
 #define CFG_ERRENR1	0x11	/* enable SDRAM refresh overflow error */
 
 /* SDRAM 0-256 MB */
 #define CFG_IBAT0L  (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+/*#define CFG_IBAT0L  (CFG_SDRAM_BASE | BATL_PP_10 | BATL_CACHEINHIBIT) */
 #define CFG_IBAT0U  (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 
 /* stack in dcache */
 #define CFG_IBAT1L  (CFG_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
 #define CFG_IBAT1U  (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
 
+
+#define CFG_IBAT2L  (CFG_SDRAM_BASE + 0x10000000 | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT2U  (CFG_SDRAM_BASE + 0x10000000| BATU_BL_256M | BATU_VS | BATU_VP)
+
 /* PCI memory */
-#define CFG_IBAT2L  (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_IBAT2U  (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+/*#define CFG_IBAT2L  (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT) */
+/*#define CFG_IBAT2U  (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP) */
 
-/* Flash, config addrs, etc. */
+/*Flash, config addrs, etc. */
 #define CFG_IBAT3L  (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
 #define CFG_IBAT3U  (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
 
@@ -298,26 +367,30 @@
 #define CFG_BOOTMAPSZ	    (8 << 20)	/* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
- * FLASH organization (AMD AM29LV116D)
- */
+ * FLASH organization
+ *----------------------------------------------------------------------*/
 #define CFG_FLASH_BASE	    0xFF800000
+#define CFG_MAX_FLASH_BANKS	1			/* Max number of flash banks */
 
-#define CFG_MAX_FLASH_BANKS	1	/* Max number of flash banks */
-#define CFG_MAX_FLASH_SECT	35	/* Max number of sectors in one bank */
-
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500		/* Timeout for Flash Write (in ms)	*/
-
-	/* Warning: environment is not EMBEDDED in the U-Boot code.
-	 * It's stored in flash separately.
-	 */
+/*	NOTE: environment is not EMBEDDED in the u-boot code.
+	It's stored in flash in its own separate sector.  */
 #define CFG_ENV_IS_IN_FLASH	    1
 
+#if 1	/* AMD AM29LV033C */
+#define CFG_MAX_FLASH_SECT	64		/* Max number of sectors in one bank */
+#define CFG_ENV_ADDR		0xFFBF0000	/* flash sector SA63 */
+#define CFG_ENV_SECT_SIZE	(64*1024)	/* Size of the Environment Sector */
+#else	/* AMD AM29LV116D */
+#define CFG_MAX_FLASH_SECT	35	/* Max number of sectors in one bank */
 #define CFG_ENV_ADDR		0xFF9FA000	/* flash sector SA33 */
-#define CFG_ENV_SIZE		0x2000		/* Size of the Environment */
+#define CFG_ENV_SECT_SIZE	(8*1024)	/* Size of the Environment Sector */
+#endif /* #if */
+
+#define CFG_ENV_SIZE		CFG_ENV_SECT_SIZE		/* Size of the Environment */
 #define CFG_ENV_OFFSET		0			/* starting right at the beginning */
-#define CFG_ENV_SECT_SIZE	0x2000 		/* Size of the Environment Sector */
 
+#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CFG_FLASH_WRITE_TOUT	500		/* Timeout for Flash Write (in ms)	*/
 
 #if CFG_MONITOR_BASE >= CFG_FLASH_BASE
 #undef CFG_RAMBOOT