summaryrefslogtreecommitdiff
path: root/include/configs/utx8245.h
diff options
context:
space:
mode:
authorwdenk <wdenk>2003-05-31 18:35:21 +0000
committerwdenk <wdenk>2003-05-31 18:35:21 +0000
commit7a8e9bed17d7924a9c5c4699b1f6a3a0359524ed (patch)
tree5c273df9c5efa7b1b6a4ca88904e48039ef591e8 /include/configs/utx8245.h
parent3b57fe0a70b903f4db66c558bb9828bc58acf06b (diff)
downloadu-boot-imx-7a8e9bed17d7924a9c5c4699b1f6a3a0359524ed.zip
u-boot-imx-7a8e9bed17d7924a9c5c4699b1f6a3a0359524ed.tar.gz
u-boot-imx-7a8e9bed17d7924a9c5c4699b1f6a3a0359524ed.tar.bz2
* Patch by Marc Singer, 29 May 2003:
Fixed rarp boot method for IA32 and other little-endian CPUs. * Patch by Marc Singer, 28 May 2003: Added port I/O commands. * Patch by Matthew McClintock, 28 May 2003 - cpu/mpc824x/start.S: fix relocation code when booting from RAM - minor patches for utx8245 * Patch by Daniel Engström, 28 May 2003: x86 update * Patch by Dave Ellis, 9 May 2003 + 27 May 2003: add nand flash support to SXNI855T configuration fix/extend nand flash support: - fix 'nand erase' command so does not erase bad blocks - fix 'nand write' command so does not write to bad blocks - fix nand_probe() so handles no flash detected properly - add doc/README.nand - add .jffs2 and .oob options to nand read/write - add 'nand bad' command to list bad blocks - add 'clean' option to 'nand erase' to write JFFS2 clean markers - make NAND read/write faster * Patch by Rune Torgersen, 23 May 2003: Update for MPC8266ADS board
Diffstat (limited to 'include/configs/utx8245.h')
-rw-r--r--include/configs/utx8245.h191
1 files changed, 132 insertions, 59 deletions
diff --git a/include/configs/utx8245.h b/include/configs/utx8245.h
index 5aec47a..80cfe8a 100644
--- a/include/configs/utx8245.h
+++ b/include/configs/utx8245.h
@@ -51,16 +51,39 @@
#define CONFIG_UTX8245 1
#define DEBUG 1
+#define CONFIG_IDENT_STRING " [UTX5] "
+
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 57600
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-#define CONFIG_BOOTDELAY 5
+#define CONFIG_BOOTDELAY 2
#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n"
-#define CONFIG_BOOTCOMMAND "bootm FF920000 FF800000" /* autoboot command */
+#define CONFIG_BOOTCOMMAND "run nfsboot" /* autoboot command */
#define CONFIG_BOOTARGS "root=/dev/ram console=ttyS0,57600" /* RAMdisk */
-#define CONFIG_ETHADDR 41:52:4c:61:00:01 /* MAC address */
-#define CONFIG_SERVERIP 10.8.17.105
+#define CONFIG_ETHADDR 00:AA:00:14:00:05 /* UTX5 */
+#define CONFIG_SERVERIP 10.8.17.105 /* Spree */
+#define CFG_TFTP_LOADADDR 10000
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "kernel_addr=FFA00000\0" \
+ "ramdisk_addr=FF800000\0" \
+ "u-boot_startaddr=FFB00000\0" \
+ "u-boot_endaddr=FFB2FFFF\0" \
+ "nfsargs=setenv bootargs console=ttyS0,$(baudrate) root=/dev/nfs rw \
+nfsroot=$(nfsrootip):$(rootpath) ip=dhcp\0" \
+ "ramargs=setenv bootargs console=ttyS0,$(baudrate) root=/dev/ram0\0" \
+ "smargs=setenv bootargs console=ttyS0,$(baudrate) root=/dev/mtdblock1 ro\0" \
+ "fwargs=setenv bootargs console=ttyS0,$(baudrate) root=/dev/sda2 ro\0" \
+ "nfsboot=run nfsargs;bootm $(kernel_addr)\0" \
+ "ramboot=run ramargs;bootm $(kernel_addr) $(ramdisk_addr)\0" \
+ "smboot=run smargs;bootm $(kernel_addr) $(ramdisk_addr)\0" \
+ "fwboot=run fwargs;bootm $(kernel_addr) $(ramdisk_addr)\0" \
+ "update_u-boot=tftp $(loadaddr) /bdi2000/u-boot.bin;protect off \
+$(u-boot_startaddr) $(u-boot_endaddr);era $(u-boot_startaddr) \
+$(u-boot_endaddr);cp.b $(loadaddr) $(u-boot_startaddr) $(filesize);\
+protect on $(u-boot_startaddr) $(u-boot_endaddr)"
+
#define CONFIG_ENV_OVERWRITE
#define CONFIG_COMMANDS (CFG_CMD_DFL | CFG_CMD_BDI | CFG_CMD_PCI \
@@ -70,7 +93,8 @@
| CFG_CMD_IMI | CFG_CMD_CACHE \
| CFG_CMD_RUN | CFG_CMD_ECHO \
| CFG_CMD_REGINFO | CFG_CMD_NET\
- | CFG_CMD_DHCP)
+ | CFG_CMD_DHCP | CFG_CMD_I2C \
+ | CFG_CMD_DATE)
/* This must be included AFTER the definition of CONFIG_COMMANDS (if any)
*/
@@ -80,9 +104,9 @@
/*
* Miscellaneous configurable options
*/
-#define CFG_LONGHELP /* undef to save memory */
-#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
/* Print Buffer Size */
#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
@@ -101,12 +125,20 @@
#define CONFIG_PCI_SCAN_SHOW
#define CONFIG_NET_MULTI
#define CONFIG_EEPRO100
+#define CONFIG_EEPRO100_SROM_WRITE
+
+#define PCI_ENET0_IOADDR 0xF0000000
+#define PCI_ENET0_MEMADDR 0xF0000000
-#define PCI_ENET0_IOADDR 0x80000000
+#define PCI_FIREWIRE_IOADDR 0xF1000000
+#define PCI_FIREWIRE_MEMADDR 0xF1000000
+/*
+#define PCI_ENET0_IOADDR 0xFE000000
#define PCI_ENET0_MEMADDR 0x80000000
+
#define PCI_FIREWIRE_IOADDR 0x81000000
#define PCI_FIREWIRE_MEMADDR 0x81000000
-
+*/
/*-----------------------------------------------------------------------
* Start addresses for the final memory configuration
@@ -114,12 +146,13 @@
* Please note that CFG_SDRAM_BASE _must_ start at 0
*/
#define CFG_SDRAM_BASE 0x00000000
-#define CFG_MAX_RAM_SIZE 0x10000000 /* amount of SDRAM */
-
+#define CFG_MAX_RAM_SIZE 0x10000000 /* 256MB */
+/*#define CFG_VERY_BIG_RAM 1 */
-/* even though FLASHP_BASE is FF800000, with 2MB on RCS0, the
- * reset vector is actually located at FF800100, but the 8245
- * takes care of us.
+/* FLASH_BASE is FF800000, with 4MB on RCS0, but the reset vector
+ * is actually located at FFF00100. Therefore, U-Boot is
+ * physically located at 0xFFB0_0000, but is also mirrored at
+ * 0xFFF0_0000.
*/
#define CFG_RESET_ADDRESS 0xFFF00100
@@ -132,17 +165,19 @@
/*#define CFG_DRAM_TEST 1 */
#define CFG_MEMTEST_START 0x00003000 /* memtest works on 0...256 MB */
-#define CFG_MEMTEST_END 0x0ff8ffa8 /* in SDRAM, skips exception */
+#define CFG_MEMTEST_END 0x0ff8ffa7 /* in SDRAM, skips exception */
/* vectors and U-Boot */
/*--------------------------------------------------------------------
* Definitions for initial stack pointer and data area
*------------------------------------------------------------------*/
-#define CFG_GBL_DATA_SIZE 128 /* Size in bytes reserved for */
+#define CFG_INIT_DATA_SIZE 128 /* Size in bytes reserved for */
/* initial data */
#define CFG_INIT_RAM_ADDR 0x40000000
#define CFG_INIT_RAM_END 0x1000
+#define CFG_INIT_DATA_OFFSET (CFG_INIT_RAM_END - CFG_INIT_DATA_SIZE)
+#define CFG_GBL_DATA_SIZE 128
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
/*--------------------------------------------------------------------
@@ -153,10 +188,16 @@
#define CFG_NS16550_REG_SIZE 1
-#define CFG_NS16550_CLK get_bus_freq(0)
+#if (CONFIG_CONS_INDEX == 1 || CONFIG_CONS_INDEX == 2)
+# define CFG_NS16550_CLK get_bus_freq(0)
+#else
+# define CFG_NS16550_CLK 33000000
+#endif
#define CFG_NS16550_COM1 (CFG_EUMB_ADDR + 0x4500)
#define CFG_NS16550_COM2 (CFG_EUMB_ADDR + 0x4600)
+#define CFG_NS16550_COM3 0xFF000000
+#define CFG_NS16550_COM4 0xFF000008
/*--------------------------------------------------------------------
* Low Level Configuration Settings
@@ -168,46 +209,61 @@
#define CONFIG_SYS_CLK_FREQ 33000000
#define CFG_HZ 1000
-#define CFG_ETH_DEV_FN 0x7800
-#define CFG_ETH_IOBASE 0x00104000
+/*#define CFG_ETH_DEV_FN 0x7800 */
+/*#define CFG_ETH_IOBASE 0x00104000 */
+
+/*--------------------------------------------------------------------
+ * I2C Configuration
+ *------------------------------------------------------------------*/
+#if 1
+#define CONFIG_HARD_I2C 1 /* To enable I2C support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+#endif
+#define CONFIG_RTC_PCF8563 1 /* enable I2C support for */
+ /* Philips PCF8563 RTC */
+#define CFG_I2C_RTC_ADDR 0x51 /* Philips PCF8563 RTC address */
/*--------------------------------------------------------------------
* Memory Control Configuration Register values
* - see sec. 4.12 of MPC8245 UM
*------------------------------------------------------------------*/
-/* MCCR1 */
+/**** MCCR1 ****/
#define CFG_ROMNAL 0
-#define CFG_ROMFAL 2 /* (tacc=70ns)*mem_freq - 2 */
-#define CFG_BANK0_ROW 2 /* SDRAM bank 7-0 row address */
-#define CFG_BANK1_ROW 2 /* bit count */
-#define CFG_BANK2_ROW 0
-#define CFG_BANK3_ROW 0
-#define CFG_BANK4_ROW 0
+#define CFG_ROMFAL 10 /* (tacc=70ns)*mem_freq - 2,
+ mem_freq = 100MHz */
+
+#define CFG_BANK7_ROW 0 /* SDRAM bank 7-0 row address */
+#define CFG_BANK6_ROW 0 /* bit count */
#define CFG_BANK5_ROW 0
-#define CFG_BANK6_ROW 0
-#define CFG_BANK7_ROW 0
+#define CFG_BANK4_ROW 0
+#define CFG_BANK3_ROW 0
+#define CFG_BANK2_ROW 0
+#define CFG_BANK1_ROW 2
+#define CFG_BANK0_ROW 2
-/* MCCR2, refresh interval clock cycles */
+/**** MCCR2, refresh interval clock cycles ****/
#define CFG_REFINT 480 /* 33 MHz SDRAM clock was 480 */
-/* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4 */
+/* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4. */
#define CFG_BSTOPRE 1023 /* burst to precharge[0..9], */
/* sets open page interval */
-/* MCCR3 */
-#define CFG_REFREC 5 /* Refresh to activate interval, trc */
+/**** MCCR3 ****/
+#define CFG_REFREC 7 /* Refresh to activate interval, trc */
-/* MCCR4 */
+/**** MCCR4 ****/
#define CFG_PRETOACT 2 /* trp */
-#define CFG_ACTTOPRE 7 /* trcd + (burst length - 1) + tdrl */
+#define CFG_ACTTOPRE 7 /* trcd + (burst length - 1) + trdl */
#define CFG_SDMODE_CAS_LAT 3 /* SDMODE CAS latancy */
#define CFG_SDMODE_WRAP 0 /* SDMODE wrap type, sequential */
#define CFG_ACTORW 2 /* trcd min */
#define CFG_DBUS_SIZE2 1 /* set for 8-bit RCS1, clear for 32,64 */
#define CFG_REGISTERD_TYPE_BUFFER 1
-#define CFG_EXTROM 1
+#define CFG_EXTROM 0 /* we don't need extended ROM space */
#define CFG_REGDIMM 0
/* calculate according to formula in sec. 6-22 of 8245 UM */
@@ -216,10 +272,18 @@
/* was 45 */
#define CFG_SDRAM_DSCD 0x20 /* SDRAM data in sample clock delay - note */
- /* bottom 3 bits MUST be 0 */
+ /* bits 7,6, and 3-0 MUST be 0 */
+#if 0
#define CFG_DLL_MAX_DELAY 0x04
+#else
+#define CFG_DLL_MAX_DELAY 0
+#endif
+#if 0 /* need for 33MHz SDRAM */
#define CFG_DLL_EXTEND 0x80
+#else
+#define CFG_DLL_EXTEND 0
+#endif
#define CFG_PCI_HOLD_DEL 0x20
@@ -255,29 +319,34 @@
#define CFG_BANK7_END 0x3fffffff
#define CFG_BANK7_ENABLE 0
-/*--------------------------------------------------------------------
- * 4.4 - Output Driver Control Register
- *------------------------------------------------------------------*/
+/*--------------------------------------------------------------------*/
+/* 4.4 - Output Driver Control Register */
+/*--------------------------------------------------------------------*/
#define CFG_ODCR 0xe5
-/*--------------------------------------------------------------------
- * 4.8 - Error Handling Registers
- *------------------------------------------------------------------*/
+/*--------------------------------------------------------------------*/
+/* 4.8 - Error Handling Registers */
+/*-------------------------------CFG_SDMODE_BURSTLEN-------------------------------------*/
#define CFG_ERRENR1 0x11 /* enable SDRAM refresh overflow error */
/* SDRAM 0-256 MB */
#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+/*#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_CACHEINHIBIT) */
#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
/* stack in dcache */
#define CFG_IBAT1L (CFG_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
#define CFG_IBAT1U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+
+#define CFG_IBAT2L (CFG_SDRAM_BASE + 0x10000000 | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT2U (CFG_SDRAM_BASE + 0x10000000| BATU_BL_256M | BATU_VS | BATU_VP)
+
/* PCI memory */
-#define CFG_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+/*#define CFG_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT) */
+/*#define CFG_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP) */
-/* Flash, config addrs, etc. */
+/*Flash, config addrs, etc. */
#define CFG_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
#define CFG_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
@@ -298,26 +367,30 @@
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
/*-----------------------------------------------------------------------
- * FLASH organization (AMD AM29LV116D)
- */
+ * FLASH organization
+ *----------------------------------------------------------------------*/
#define CFG_FLASH_BASE 0xFF800000
+#define CFG_MAX_FLASH_BANKS 1 /* Max number of flash banks */
-#define CFG_MAX_FLASH_BANKS 1 /* Max number of flash banks */
-#define CFG_MAX_FLASH_SECT 35 /* Max number of sectors in one bank */
-
-#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-
- /* Warning: environment is not EMBEDDED in the U-Boot code.
- * It's stored in flash separately.
- */
+/* NOTE: environment is not EMBEDDED in the u-boot code.
+ It's stored in flash in its own separate sector. */
#define CFG_ENV_IS_IN_FLASH 1
+#if 1 /* AMD AM29LV033C */
+#define CFG_MAX_FLASH_SECT 64 /* Max number of sectors in one bank */
+#define CFG_ENV_ADDR 0xFFBF0000 /* flash sector SA63 */
+#define CFG_ENV_SECT_SIZE (64*1024) /* Size of the Environment Sector */
+#else /* AMD AM29LV116D */
+#define CFG_MAX_FLASH_SECT 35 /* Max number of sectors in one bank */
#define CFG_ENV_ADDR 0xFF9FA000 /* flash sector SA33 */
-#define CFG_ENV_SIZE 0x2000 /* Size of the Environment */
+#define CFG_ENV_SECT_SIZE (8*1024) /* Size of the Environment Sector */
+#endif /* #if */
+
+#define CFG_ENV_SIZE CFG_ENV_SECT_SIZE /* Size of the Environment */
#define CFG_ENV_OFFSET 0 /* starting right at the beginning */
-#define CFG_ENV_SECT_SIZE 0x2000 /* Size of the Environment Sector */
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
#undef CFG_RAMBOOT