board/BuR: rename tseries board to brppt1

Rename B&R tseries board to brppt1

Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at>
Reviewed-by: Tom Rini <trini@konsulko.com>

1 files changed, 0 insertions, 304 deletions

diff --git a/include/configs/tseries.h b/include/configs/tseries.h
deleted file mode 100644
index 8ed9eb0..0000000
--- a/include/configs/tseries.h
+++ /dev/null
@@ -1,304 +0,0 @@
-/*
- * tseries.h
- *
- * specific parts for B&R T-Series Motherboard
- *
- * Copyright (C) 2013 Hannes Schmelzer <oe5hpm@oevsv.at> -
- * Bernecker & Rainer Industrieelektronik GmbH - http://www.br-automation.com
- *
- * SPDX-License-Identifier:        GPL-2.0+
- */
-
-#ifndef __CONFIG_TSERIES_H__
-#define __CONFIG_TSERIES_H__
-
-#include <configs/bur_cfg_common.h>
-#include <configs/bur_am335x_common.h>
-/* ------------------------------------------------------------------------- */
-#define CONFIG_AM335X_LCD
-#define CONFIG_LCD
-#define CONFIG_LCD_ROTATION
-#define CONFIG_LCD_DT_SIMPLEFB
-#define CONFIG_SYS_WHITE_ON_BLACK
-#define LCD_BPP				LCD_COLOR32
-
-#define CONFIG_HW_WATCHDOG
-#define CONFIG_OMAP_WATCHDOG
-#define CONFIG_SPL_WATCHDOG_SUPPORT
-
-#define CONFIG_SPL_GPIO_SUPPORT
-/* Bootcount using the RTC block */
-#define CONFIG_SYS_BOOTCOUNT_ADDR	0x44E3E000
-#define CONFIG_BOOTCOUNT_LIMIT
-#define CONFIG_BOOTCOUNT_AM33XX
-
-/* memory */
-#define CONFIG_SYS_MALLOC_LEN		(5 * 1024 * 1024)
-
-/* Clock Defines */
-#define V_OSCK				26000000  /* Clock output from T2 */
-#define V_SCLK				(V_OSCK)
-
-#define CONFIG_POWER_TPS65217
-
-/* Support both device trees and ATAGs. */
-#define CONFIG_USE_FDT			/* use fdt within board code */
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-/*#define CONFIG_MACH_TYPE		3589*/
-#define CONFIG_MACH_TYPE		0xFFFFFFFF /* TODO: check with kernel*/
-
-/* MMC/SD IP block */
-#if defined(CONFIG_EMMC_BOOT)
- #define CONFIG_MMC
- #define CONFIG_GENERIC_MMC
- #define CONFIG_OMAP_HSMMC
- #define CONFIG_SUPPORT_EMMC_BOOT
-/* RAW SD card / eMMC locations. */
- #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300 /*addr. 0x60000 */
- #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS		0x200 /* 256 KB */
- #define CONFIG_SPL_MMC_SUPPORT
-#endif /* CONFIG_EMMC_BOOT */
-
-/*
- * When we have SPI or NAND flash we expect to be making use of mtdparts,
- * both for ease of use in U-Boot and for passing information on to
- * the Linux kernel.
- */
-#if defined(CONFIG_SPI_BOOT) || defined(CONFIG_NAND)
-#define CONFIG_MTD_DEVICE		/* Required for mtdparts */
-#define CONFIG_CMD_MTDPARTS
-#endif /* CONFIG_SPI_BOOT, ... */
-
-#undef CONFIG_SPL_OS_BOOT
-#ifdef CONFIG_SPL_OS_BOOT
-#define CONFIG_SYS_SPL_ARGS_ADDR		0x80F80000
-
-/* RAW SD card / eMMC */
-#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR	0x900	/* address 0x120000 */
-#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR	0x80	/* address 0x10000 */
-#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS	0x80	/* 64KiB */
-
-/* NAND */
-#ifdef CONFIG_NAND
-#define CONFIG_CMD_SPL_NAND_OFS			0x080000 /* end of u-boot */
-#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS		0x140000
-#define CONFIG_CMD_SPL_WRITE_SIZE		0x2000
-#endif /* CONFIG_NAND */
-#endif /* CONFIG_SPL_OS_BOOT */
-
-#ifdef CONFIG_NAND
-#define CONFIG_SPL_NAND_AM33XX_BCH	/* OMAP4 and later ELM support */
-#define CONFIG_SPL_NAND_SUPPORT
-#define CONFIG_SPL_NAND_BASE
-#define CONFIG_SPL_NAND_DRIVERS
-#define CONFIG_SPL_NAND_ECC
-#define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
-#endif /* CONFIG_NAND */
-
-/* Always 64 KiB env size */
-#define CONFIG_ENV_SIZE			(64 << 10)
-
-#ifdef CONFIG_NAND
-#define NANDARGS \
-	"mtdids=" MTDIDS_DEFAULT "\0" \
-	"mtdparts=" MTDPARTS_DEFAULT "\0" \
-	"nandargs=setenv bootargs console=${console} " \
-		"${optargs} " \
-		"${optargs_rot} " \
-		"root=mtd6 " \
-		"rootfstype=jffs2\0" \
-	"kernelsize=0x400000\0" \
-	"nandboot=echo booting from nand ...; " \
-		"run nandargs; " \
-		"nand read ${loadaddr} kernel ${kernelsize}; " \
-		"bootz ${loadaddr} - ${dtbaddr}\0" \
-	"defboot=run nandboot\0" \
-	"bootlimit=1\0" \
-	"simplefb=1\0 " \
-	"altbootcmd=run usbscript\0"
-#else
-#define NANDARGS ""
-#endif /* CONFIG_NAND */
-
-#ifdef CONFIG_MMC
-#define MMCARGS \
-"dtbdev=mmc\0" \
-"dtbpart=0:1\0" \
-"mmcroot0=setenv bootargs ${optargs_rot} ${optargs} console=${console}\0" \
-"mmcroot1=setenv bootargs ${optargs_rot} ${optargs} console=${console} " \
-	"root=/dev/mmcblk0p2 rootfstype=ext4\0" \
-"mmcboot0=echo booting Updatesystem from mmc (ext4-fs) ...; " \
-	"setenv simplefb 1; " \
-	"ext4load mmc 0:1 ${loadaddr} /${kernel}; " \
-	"ext4load mmc 0:1 ${ramaddr} /${ramdisk}; " \
-	"run mmcroot0; bootz ${loadaddr} ${ramaddr} ${dtbaddr};\0" \
-"mmcboot1=echo booting PPT-OS from mmc (ext4-fs) ...; " \
-	"setenv simplefb 0; " \
-	"ext4load mmc 0:2 ${loadaddr} /boot/${kernel}; " \
-	"run mmcroot1; bootz ${loadaddr} - ${dtbaddr};\0" \
-"defboot=ext4load mmc 0:2 ${loadaddr} /boot/PPTImage.md5 && run mmcboot1; " \
-	"ext4load mmc 0:1 ${dtbaddr} /$dtb && run mmcboot0; " \
-	"run ramboot; run usbscript;\0" \
-"bootlimit=1\0" \
-"altbootcmd=run mmcboot0;\0" \
-"upduboot=dhcp; " \
-	"tftp ${loadaddr} MLO && mmc write ${loadaddr} 100 100; " \
-	"tftp ${loadaddr} u-boot.img && mmc write ${loadaddr} 300 400;\0"
-#else
-#define MMCARGS ""
-#endif /* CONFIG_MMC */
-
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_EXTRA_ENV_SETTINGS \
-BUR_COMMON_ENV \
-"verify=no\0" \
-"autoload=0\0" \
-"dtb=bur-ppt-ts30.dtb\0" \
-"dtbaddr=0x80100000\0" \
-"loadaddr=0x80200000\0" \
-"ramaddr=0x80A00000\0" \
-"kernel=zImage\0" \
-"ramdisk=rootfs.cpio.uboot\0" \
-"console=ttyO0,115200n8\0" \
-"optargs=consoleblank=0 quiet panic=2\0" \
-"nfsroot=/tftpboot/tseries/rootfs-small\0" \
-"nfsopts=nolock\0" \
-"ramargs=setenv bootargs ${optargs} console=${console} root=/dev/ram0\0" \
-"netargs=setenv bootargs console=${console} " \
-	"${optargs} " \
-	"root=/dev/nfs " \
-	"nfsroot=${serverip}:${nfsroot},${nfsopts} rw " \
-	"ip=dhcp\0" \
-"netboot=echo Booting from network ...; " \
-	"dhcp; " \
-	"tftp ${loadaddr} ${kernel}; " \
-	"tftp ${dtbaddr} ${dtb}; " \
-	"run netargs; " \
-	"bootz ${loadaddr} - ${dtbaddr}\0" \
-"ramboot=echo Booting from network into RAM ...; "\
-	"if dhcp; then; " \
-	"tftp ${loadaddr} ${kernel}; " \
-	"tftp ${ramaddr} ${ramdisk}; " \
-	"if ext4load ${dtbdev} ${dtbpart} ${dtbaddr} /${dtb}; " \
-	"then; else tftp ${dtbaddr} ${dtb}; fi;" \
-	"run mmcroot0; " \
-	"bootz ${loadaddr} ${ramaddr} ${dtbaddr}; fi;\0" \
-"netupdate=echo Updating UBOOT from Network (TFTP) ...; " \
-	"setenv autoload 0; " \
-	"dhcp && tftp 0x80000000 updateUBOOT.img && source;\0" \
-NANDARGS \
-MMCARGS
-#endif /* !CONFIG_SPL_BUILD*/
-
-#define CONFIG_BOOTCOMMAND \
-	"run defboot;"
-
-#ifdef CONFIG_NAND
-/*
- * GPMC  block.  We support 1 device and the physical address to
- * access CS0 at is 0x8000000.
- */
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_SYS_NAND_BASE		0x8000000
-#define CONFIG_NAND_OMAP_GPMC
-/* don't change OMAP_ELM, ECCSCHEME. ROM code only supports this */
-#define CONFIG_NAND_OMAP_ELM
-#define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_BLOCK_SIZE	(128*1024)
-#define CONFIG_SYS_NAND_PAGE_SIZE	2048
-#define CONFIG_SYS_NAND_PAGE_COUNT	(CONFIG_SYS_NAND_BLOCK_SIZE / \
-					CONFIG_SYS_NAND_PAGE_SIZE)
-#define CONFIG_SYS_NAND_OOBSIZE		64
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
-#define CONFIG_SYS_NAND_ECCPOS		{2, 3, 4, 5, 6, 7, 8, 9, \
-					10, 11, 12, 13, 14, 15, 16, 17, \
-					18, 19, 20, 21, 22, 23, 24, 25, \
-					26, 27, 28, 29, 30, 31, 32, 33, \
-					34, 35, 36, 37, 38, 39, 40, 41, \
-					42, 43, 44, 45, 46, 47, 48, 49, \
-					50, 51, 52, 53, 54, 55, 56, 57, }
-
-#define CONFIG_SYS_NAND_ECCSIZE		512
-#define CONFIG_SYS_NAND_ECCBYTES	14
-
-#define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
-
-#define MTDIDS_DEFAULT			"nand0=omap2-nand.0"
-#define MTDPARTS_DEFAULT		"mtdparts=omap2-nand.0:" \
-					"128k(MLO)," \
-					"128k(MLO.backup)," \
-					"128k(dtb)," \
-					"128k(u-boot-env)," \
-					"512k(u-boot)," \
-					"4m(kernel),"\
-					"128m(rootfs),"\
-					"-(user)"
-#define CONFIG_NAND_OMAP_GPMC_WSCFG	1
-#endif /* CONFIG_NAND */
-
-/* USB configuration */
-#define CONFIG_USB_MUSB_DSPS
-#define CONFIG_ARCH_MISC_INIT
-#define CONFIG_USB_MUSB_PIO_ONLY
-#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
-#define CONFIG_AM335X_USB0
-#define CONFIG_AM335X_USB0_MODE	MUSB_HOST
-#define CONFIG_AM335X_USB1
-#define CONFIG_AM335X_USB1_MODE MUSB_HOST
-
-#if defined(CONFIG_SPI_BOOT)
-/* McSPI IP block */
-#define CONFIG_SPI
-#define CONFIG_OMAP3_SPI
-#define CONFIG_SF_DEFAULT_SPEED		24000000
-
-#define CONFIG_SPL_SPI_SUPPORT
-#define CONFIG_SPL_SPI_FLASH_SUPPORT
-#define CONFIG_SPL_SPI_LOAD
-#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x20000
-#undef CONFIG_ENV_IS_NOWHERE
-#define CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
-#define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED
-#define CONFIG_ENV_SECT_SIZE		(4 << 10) /* 4 KB sectors */
-#define CONFIG_ENV_OFFSET		(768 << 10) /* 768 KiB in */
-#define CONFIG_ENV_OFFSET_REDUND	(896 << 10) /* 896 KiB in */
-
-#elif defined(CONFIG_EMMC_BOOT)
-#undef CONFIG_ENV_IS_NOWHERE
-#define CONFIG_ENV_IS_IN_MMC
-#define CONFIG_SYS_MMC_ENV_DEV		0
-#define CONFIG_SYS_MMC_ENV_PART		2
-#define CONFIG_ENV_OFFSET		0x40000	/* TODO: Adresse definieren */
-#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
-#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
-
-#elif defined(CONFIG_NAND)
-/* No NAND env support in SPL */
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_ENV_IS_NOWHERE
-#else
-#define CONFIG_ENV_IS_IN_NAND
-#endif
-#define CONFIG_ENV_OFFSET		0x60000
-#define CONFIG_SYS_ENV_SECT_SIZE	CONFIG_ENV_SIZE
-#else
-#error "no storage for Environment defined!"
-#endif
-/*
- * Common filesystems support.  When we have removable storage we
- * enabled a number of useful commands and support.
- */
-#if defined(CONFIG_MMC) || defined(CONFIG_USB_STORAGE)
-#define CONFIG_DOS_PARTITION
-#define CONFIG_FAT_WRITE
-#define CONFIG_FS_EXT4
-#define CONFIG_EXT4_WRITE
-#endif /* CONFIG_MMC, ... */
-
-#endif	/* ! __CONFIG_TSERIES_H__ */