Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'

1 files changed, 166 insertions, 0 deletions

diff --git a/include/configs/ti_omap4_common.h b/include/configs/ti_omap4_common.h
new file mode 100644
index 0000000..2f0e4c0
--- /dev/null
+++ b/include/configs/ti_omap4_common.h
@@ -0,0 +1,166 @@
+/*
+ * (C) Copyright 2010
+ * Texas Instruments Incorporated.
+ * Aneesh V       <aneesh@ti.com>
+ * Steve Sakoman  <steve@sakoman.com>
+ *
+ * TI OMAP4 common configuration settings
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __CONFIG_TI_OMAP4_COMMON_H
+#define __CONFIG_TI_OMAP4_COMMON_H
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_OMAP44XX		1	/* which is a 44XX */
+#define CONFIG_OMAP4430		1	/* which is in a 4430 */
+#define CONFIG_MISC_INIT_R
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_DISPLAY_CPUINFO		1
+#define CONFIG_DISPLAY_BOARDINFO	1
+
+#define CONFIG_SYS_THUMB_BUILD
+
+#ifndef CONFIG_SYS_L2CACHE_OFF
+#define CONFIG_SYS_L2_PL310		1
+#define CONFIG_SYS_PL310_BASE	0x48242000
+#endif
+#define CONFIG_SYS_CACHELINE_SIZE	32
+
+/* Get CPU defs */
+#include <asm/arch/cpu.h>
+#include <asm/arch/omap.h>
+
+/* Use General purpose timer 1 */
+#define CONFIG_SYS_TIMERBASE		GPT2_BASE
+
+/*
+ * Total Size Environment - 128k
+ */
+#define CONFIG_ENV_SIZE			(128 << 10)
+
+/*
+ * For the DDR timing information we can either dynamically determine
+ * the timings to use or use pre-determined timings (based on using the
+ * dynamic method.  Default to the static timing infomation.
+ */
+#define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+#define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION
+#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
+#endif
+
+#include <configs/ti_armv7_common.h>
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
+#define CONFIG_SYS_NS16550_CLK		48000000
+#define CONFIG_CONS_INDEX		3
+#define CONFIG_SYS_NS16550_COM3		UART3_BASE
+
+/* TWL6030 */
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_TWL6030_POWER		1
+#endif
+
+/* USB */
+#define CONFIG_MUSB_UDC			1
+#define CONFIG_USB_OMAP3		1
+
+/* USB device configuration */
+#define CONFIG_USB_DEVICE		1
+#define CONFIG_USB_TTY			1
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV	1
+
+/* Per-Soc commands */
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
+
+/*
+ * Environment setup
+ */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"loadaddr=0x82000000\0" \
+	"console=ttyO2,115200n8\0" \
+	"fdt_high=0xffffffff\0" \
+	"fdtaddr=0x80f80000\0" \
+	"fdtfile=undefined\0" \
+	"bootpart=0:2\0" \
+	"bootdir=/boot\0" \
+	"bootfile=zImage\0" \
+	"usbtty=cdc_acm\0" \
+	"vram=16M\0" \
+	"mmcdev=0\0" \
+	"mmcroot=/dev/mmcblk0p2 rw\0" \
+	"mmcrootfstype=ext3 rootwait\0" \
+	"mmcargs=setenv bootargs console=${console} " \
+		"vram=${vram} " \
+		"root=${mmcroot} " \
+		"rootfstype=${mmcrootfstype}\0" \
+	"loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
+	"bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
+		"source ${loadaddr}\0" \
+	"loadbootenv=fatload mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \
+	"importbootenv=echo Importing environment from mmc${mmcdev} ...; " \
+		"env import -t ${loadaddr} ${filesize}\0" \
+	"loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
+	"mmcboot=echo Booting from mmc${mmcdev} ...; " \
+		"run mmcargs; " \
+		"bootz ${loadaddr} - ${fdtaddr}\0" \
+	"findfdt="\
+		"if test $board_name = sdp4430; then " \
+			"setenv fdtfile omap4-sdp.dtb; fi; " \
+		"if test $board_name = panda; then " \
+			"setenv fdtfile omap4-panda.dtb; fi;" \
+		"if test $board_name = panda-a4; then " \
+			"setenv fdtfile omap4-panda-a4.dtb; fi;" \
+		"if test $board_name = panda-es; then " \
+			"setenv fdtfile omap4-panda-es.dtb; fi;" \
+		"if test $fdtfile = undefined; then " \
+			"echo WARNING: Could not determine device tree to use; fi; \0" \
+	"loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
+
+#define CONFIG_BOOTCOMMAND \
+	"run findfdt; " \
+	"mmc dev ${mmcdev}; if mmc rescan; then " \
+		"echo SD/MMC found on device ${mmcdev};" \
+		"if run loadbootscript; then " \
+			"run bootscript; " \
+		"else " \
+			"if run loadbootenv; then " \
+				"run importbootenv; " \
+			"fi;" \
+			"if test -n ${uenvcmd}; then " \
+				"echo Running uenvcmd ...;" \
+				"run uenvcmd;" \
+			"fi;" \
+		"fi;" \
+		"if run loadimage; then " \
+			"run loadfdt;" \
+			"run mmcboot; " \
+		"fi; " \
+	"fi"
+
+/*
+ * Defines for SPL
+ * It is known that this will break HS devices. Since the current size of
+ * SPL is overlapped with public stack and breaking non HS devices to boot.
+ * So moving TEXT_BASE down to non-HS limit.
+ */
+#define CONFIG_SPL_TEXT_BASE		0x40300000
+#define CONFIG_SPL_MAX_SIZE		(0x4030C000 - CONFIG_SPL_TEXT_BASE)
+#define CONFIG_SPL_DISPLAY_PRINT
+#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
+
+#ifdef CONFIG_NAND
+#define CONFIG_SPL_NAND_AM33XX_BCH	/* ELM support */
+#endif
+
+#endif /* __CONFIG_TI_OMAP4_COMMON_H */