* Patch by Yasushi Shoji, 07 Apr 2004:

  - add support for microblaze processors
  - add support for AtmarkTechno "suzaku" board

1 files changed, 90 insertions, 0 deletions

diff --git a/include/configs/suzaku.h b/include/configs/suzaku.h
new file mode 100644
index 0000000..5c5cdf4
--- /dev/null
+++ b/include/configs/suzaku.h
@@ -0,0 +1,90 @@
+/*
+ * (C) Copyright 2004 Atmark Techno, Inc.
+ *
+ * Yasushi SHOJI <yashi@atmark-techno.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * If we are developing, we might want to start armboot from ram
+ * so we MUST NOT initialize critical regs like mem-timing ...
+ */
+#define CONFIG_INIT_CRITICAL		/* undef for developing */
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_MICROBLZE	1	/* This is an MicroBlaze CPU	*/
+#define CONFIG_SUZAKU		1	/* on an SUZAKU Board		*/
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE		0x80000000
+#define CFG_SDRAM_SIZE		0x01000000
+#define CFG_FLASH_BASE		0xfff00000
+#define CFG_RESET_ADDRESS	0xfff00100
+#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
+#define CFG_MONITOR_BASE        (CFG_SDRAM_BASE + CFG_SDRAM_SIZE - (1024 * 1024))
+#define CFG_MALLOC_LEN		(256 << 10)	/* Reserve 256 kB for malloc */
+
+#define CONFIG_BAUDRATE		115200
+#define CFG_BAUDRATE_TABLE	{ 115200 }
+
+#define CONFIG_COMMANDS		(CONFIG__CMD_DFL)
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#define CFG_UART1_BASE		(0xFFFF2000)
+#define CONFIG_SERIAL_BASE	CFG_UART1_BASE
+
+/*
+ * Miscellaneous configurable options
+ */
+#define	CFG_LONGHELP				/* undef to save memory		*/
+#define CFG_PROMPT		"SUZAKU> "	/* Monitor Command Prompt	*/
+#define CFG_CBSIZE		256
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size	*/
+#define CFG_MAXARGS		16		/* max number of command args	*/
+
+#define CFG_LOAD_ADDR		CFG_SDRAM_BASE	/* default load address		*/
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CFG_MAX_FLASH_SECT	1	/* max number of sectors on one chip	*/
+
+/*-----------------------------------------------------------------------
+ * NVRAM organization
+ */
+#define CFG_ENV_IS_NOWHERE	1
+#define	CFG_ENV_SIZE		0x10000	/* Total Size of Environment Sector	*/
+#define CFG_ENV_SECT_SIZE	0x10000	/* see README - env sector total size	*/
+
+#endif	/* __CONFIG_H */