Merge git://www.denx.de/git/u-boot

Conflicts:

	CREDITS

1 files changed, 60 insertions, 59 deletions

diff --git a/include/configs/spieval.h b/include/configs/spieval.h
index f40dde2..4b618f3 100644
--- a/include/configs/spieval.h
+++ b/include/configs/spieval.h
@@ -44,11 +44,6 @@
 #define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH  */
 #define BOOTFLAG_WARM		0x02	/* Software reboot	     */
 
-#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
-#endif
-
 /*
  * Serial console configuration
  */
@@ -88,12 +83,6 @@
 #define CONFIG_NS8382X		1
 #endif	/* CONFIG_STK52XX */
 
-#ifdef CONFIG_PCI
-#define ADD_PCI_CMD		CFG_CMD_PCI
-#else
-#define ADD_PCI_CMD		0
-#endif
-
 /*
  * Video console
  */
@@ -110,12 +99,6 @@
 #define CFG_CONSOLE_IS_IN_ENV
 #endif
 
-#ifdef CONFIG_VIDEO
-#define ADD_BMP_CMD		CFG_CMD_BMP
-#else
-#define ADD_BMP_CMD		0
-#endif
-
 /* Partitions */
 #define CONFIG_MAC_PARTITION
 #define CONFIG_DOS_PARTITION
@@ -124,10 +107,7 @@
 /* USB */
 #ifdef CONFIG_STK52XX
 #define CONFIG_USB_OHCI
-#define ADD_USB_CMD		CFG_CMD_USB | CFG_CMD_FAT
 #define CONFIG_USB_STORAGE
-#else
-#define ADD_USB_CMD		0
 #endif
 
 /* POST support */
@@ -136,43 +116,60 @@
 				 CFG_POST_I2C)
 
 #ifdef CONFIG_POST
-#define CFG_CMD_POST_DIAG CFG_CMD_DIAG
 /* preserve space for the post_word at end of on-chip SRAM */
 #define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4
-#else
-#define CFG_CMD_POST_DIAG 0
 #endif
 
-/* IDE */
-#if defined (CONFIG_MINIFAP) || defined (CONFIG_STK52XX)
-#define ADD_IDE_CMD		(CFG_CMD_IDE | CFG_CMD_FAT | CFG_CMD_EXT2)
-#else
-#define ADD_IDE_CMD		0
-#endif
 
 /*
- * Supported commands
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
  */
-#define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
-				ADD_BMP_CMD	| \
-				ADD_IDE_CMD	| \
-				ADD_PCI_CMD	| \
-				ADD_USB_CMD	| \
-				CFG_CMD_ASKENV	| \
-				CFG_CMD_DATE	| \
-				CFG_CMD_DHCP	| \
-				CFG_CMD_ECHO	| \
-				CFG_CMD_EEPROM	| \
-				CFG_CMD_I2C	| \
-				CFG_CMD_MII	| \
-				CFG_CMD_NFS	| \
-				CFG_CMD_PING	| \
-				CFG_CMD_POST_DIAG | \
-				CFG_CMD_REGINFO | \
-				CFG_CMD_SNTP	)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SNTP
+
+#if defined(CONFIG_MINIFAP) || defined(CONFIG_STK52XX)
+    #define CONFIG_CMD_IDE
+    #define CONFIG_CMD_FAT
+    #define CONFIG_CMD_EXT2
+#endif
+
+#ifdef CONFIG_STK52XX
+    #define CONFIG_CMD_USB
+    #define CONFIG_CMD_FAT
+#endif
+
+#ifdef CONFIG_VIDEO
+    #define CONFIG_CMD_BMP
+#endif
+
+#ifdef CONFIG_PCI
+    #define CONFIG_CMD_PCI
+#endif
+
+#ifdef CONFIG_POST
+#define CONFIG_CMD_DIAG
+#endif
+
 
 #define	CONFIG_TIMESTAMP		/* display image timestamps */
 
@@ -219,17 +216,17 @@
 /*
  * IPB Bus clocking configuration.
  */
-#define CFG_IPBSPEED_133		/* define for 133MHz speed */
+#define CFG_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
 
-#if defined(CFG_IPBSPEED_133)
+#if defined(CFG_IPBCLK_EQUALS_XLBCLK)
 /*
  * PCI Bus clocking configuration
  *
  * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if
- * CFG_IPBSPEED_133 is defined. This is because a PCI Clock of 66 MHz yet hasn't
- * been tested with a IPB Bus Clock of 66 MHz.
+ * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock
+ * of 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz.
  */
-#define CFG_PCISPEED_66			/* define for 66MHz speed */
+#define CFG_PCICLK_EQUALS_IPBCLK_DIV2	/* define for 66MHz speed */
 #endif
 
 /*
@@ -406,7 +403,7 @@
  */
 #define CFG_LONGHELP			/* undef to save memory	    */
 #define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
 #else
 #define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
@@ -425,9 +422,13 @@
 
 #define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
 
+#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
+#if defined(CONFIG_CMD_KGDB)
+#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#endif
+
 /*
- * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined,
- * which is normally part of the default commands (CFV_CMD_DFL)
+ * Enable loopw command.
  */
 #define CONFIG_LOOPW
 
@@ -444,7 +445,7 @@
 
 #define CFG_BOOTCS_START	CFG_FLASH_BASE
 #define CFG_BOOTCS_SIZE		CFG_FLASH_SIZE
-#ifdef CFG_PCISPEED_66
+#ifdef CFG_PCICLK_EQUALS_IPBCLK_DIV2
 #define CFG_BOOTCS_CFG		0x0008DF30 /* for pci_clk  = 66 MHz */
 #else
 #define CFG_BOOTCS_CFG		0x0004DF30 /* for pci_clk = 33 MHz */