* Patch by Marc Singer, 29 May 2003:

  Fixed rarp boot method for IA32 and other little-endian CPUs.

* Patch by Marc Singer, 28 May 2003:
  Added port I/O commands.

* Patch by Matthew McClintock, 28 May 2003
  - cpu/mpc824x/start.S: fix relocation code when booting from RAM
  - minor patches for utx8245

* Patch by Daniel Engström, 28 May 2003:
  x86 update

* Patch by Dave Ellis, 9 May 2003 + 27 May 2003:
  add nand flash support to SXNI855T configuration
  fix/extend nand flash support:
  - fix 'nand erase' command so does not erase bad blocks
  - fix 'nand write' command so does not write to bad blocks
  - fix nand_probe() so handles no flash detected properly
  - add doc/README.nand
  - add .jffs2 and .oob options to nand read/write
  - add 'nand bad' command to list bad blocks
  - add 'clean' option to 'nand erase' to write JFFS2 clean markers
  - make NAND read/write faster

* Patch by Rune Torgersen, 23 May 2003:
  Update for MPC8266ADS board

1 files changed, 212 insertions, 0 deletions

diff --git a/include/configs/sc520_spunk.h b/include/configs/sc520_spunk.h
new file mode 100644
index 0000000..4d5a568
--- /dev/null
+++ b/include/configs/sc520_spunk.h
@@ -0,0 +1,212 @@
+/*
+ * (C) Copyright 2002
+ * Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_X86		1	/* This is a X86 CPU		*/
+#define CONFIG_SC520		1	/* Include support for AMD SC520 */
+
+#define CFG_SDRAM_PRECHARGE_DELAY 6     /* 6T */	
+#define CFG_SDRAM_REFRESH_RATE    78    /* 7.8uS (choices are 7.8, 15.6, 31.2 or 62.5uS) */
+#define CFG_SDRAM_RAS_CAS_DELAY   3     /* 3T */
+
+/* define at most one of these */
+#undef CFG_SDRAM_CAS_LATENCY_2T
+#define CFG_SDRAM_CAS_LATENCY_3T
+
+#define CFG_SC520_HIGH_SPEED    0       /* 100 or 133MHz */
+#define CFG_RESET_GENERIC       1       /* use tripple-fault to reset cpu */
+#undef  CFG_RESET_SC520                 /* use SC520 MMCR's to reset cpu */
+#undef  CFG_TIMER_SC520                 /* use SC520 swtimers */
+#define CFG_TIMER_GENERIC       1       /* use the i8254 PIT timers */
+#undef  CFG_TIMER_TSC                   /* use the Pentium TSC timers */
+
+#define CFG_STACK_SIZE          0x8000  /* Size of bootloader stack */
+
+#define CONFIG_SHOW_BOOT_PROGRESS 1
+#define CONFIG_LAST_STAGE_INIT    1
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_MALLOC_SIZE	(CFG_ENV_SIZE + 128*1024)
+
+
+#define CONFIG_BAUDRATE		9600
+
+#define CONFIG_COMMANDS         (CONFIG_CMD_DFL | CFG_CMD_PCI | CFG_CMD_JFFS2 | CFG_CMD_IDE | CFG_CMD_NET | CFG_CMD_PCMCIA | CFG_CMD_EEPROM)
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#define CONFIG_BOOTDELAY	15
+#define CONFIG_BOOTARGS    	"root=/dev/mtdblock1 console=ttyS0,9600 mtdparts=phys:7936k(root),256k(uboot) "
+#define CONFIG_BOOTCOMMAND	"setenv bootargs root=/dev/nfs ip=autoconf console=ttyS0,9600 mtdparts=phys:7808k(root),128k(env),256k(uboot); bootp; bootm" 
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	115200		/* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
+#endif
+
+
+/*
+ * Miscellaneous configurable options
+ */
+#define	CFG_LONGHELP				/* undef to save memory		*/
+#define	CFG_PROMPT		"boot > "	/* Monitor Command Prompt	*/
+#define	CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define	CFG_MAXARGS		16		/* max number of command args	*/
+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+
+#define CFG_MEMTEST_START	0x00100000	/* memtest works on	*/
+#define CFG_MEMTEST_END		0x01000000	/* 1 ... 16 MB in DRAM	*/
+
+#undef  CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+
+#define	CFG_LOAD_ADDR		0x100000	/* default load address	*/
+
+#define	CFG_HZ			1024		/* incrementer freq: 1kHz */
+
+						/* valid baudrates */
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS	4	   /* we have 4 banks of DRAM */
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+
+
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CFG_MAX_FLASH_SECT	512	/* max number of sectors on one chip	*/
+
+/* timeout values are in ticks */
+#define CFG_FLASH_ERASE_TOUT	(2*CFG_HZ) /* Timeout for Flash Erase */
+#define CFG_FLASH_WRITE_TOUT	(2*CFG_HZ) /* Timeout for Flash Write */
+
+
+#define CONFIG_SPI_EEPROM       /* SPI EEPROMs such as AT25010 or AT25640 */
+#define CONFIG_MW_EEPROM        /* MicroWire EEPROMS such as AT93LC46 */
+#define CONFIG_DS1722           /* Dallas DS1722 SPI Temperature probe */
+				 
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+
+#if 0
+/* Environment in flash */
+#define CFG_ENV_IS_IN_FLASH     1 
+# define CFG_ENV_ADDR		(0x387a0000)	/* Addr of Environment Sector	*/
+# define CFG_ENV_SIZE		0x20000	/* Total Size of Environment Sector (or 0x10000) */
+# define CFG_ENV_OFFSET         0
+
+#else
+/* Environment in EEPROM */
+
+# define CFG_ENV_IS_IN_EEPROM   1
+# define CONFIG_SPI
+# define CONFIG_SPI_X 1
+# define CFG_ENV_SIZE		0x2000	/* Total Size of Environment EEPROM	*/
+# define CFG_ENV_OFFSET         0x1c00      
+
+#endif
+
+#define CFG_JFFS2_FIRST_BANK    0           /* use for JFFS2 */
+#define CFG_JFFS2_NUM_BANKS     1           /*  */
+
+/*-----------------------------------------------------------------------
+ * Device drivers
+ */
+#define CONFIG_NET_MULTI        /* Multi ethernet cards support */
+#define CONFIG_EEPRO100
+
+/************************************************************
+ * IDE/ATA stuff
+ ************************************************************/
+#define CFG_IDE_MAXBUS		2   /* max. 2 IDE busses	*/
+#define CFG_IDE_MAXDEVICE	(CFG_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */
+#define CFG_ATA_BASE_ADDR       0
+#define CFG_ATA_IDE0_OFFSET	0x01f0	/* ide0 offset */
+#define CFG_ATA_IDE1_OFFSET	0xe000	/* ide1 offset */
+#define CFG_ATA_DATA_OFFSET	0	/* data reg offset	*/
+#define CFG_ATA_REG_OFFSET	0	/* reg offset */
+#define CFG_ATA_ALT_OFFSET	0x200	/* alternate register offset */
+
+#define CFG_FISRT_PCMCIA_BUS    1
+
+#undef	CONFIG_IDE_LED			/* no led for ide supported	*/
+#undef  CONFIG_IDE_RESET		/* reset for ide unsupported...	*/
+#undef  CONFIG_IDE_RESET_ROUTINE	/* no special reset function */
+
+#define CONFIG_IDE_TI_CARDBUS
+#define CFG_PCMCIA_CIS_WIN          0x27f00000
+#define CFG_PCMCIA_CIS_WIN_SIZE     0x00100000
+#define CFG_PCMCIA_IO_WIN           0xe000
+#define CFG_PCMCIA_IO_WIN_SIZE      16
+
+/************************************************************
+ * DISK Partition support
+ ************************************************************/
+#define CONFIG_DOS_PARTITION
+#define CONFIG_MAC_PARTITION
+#define CONFIG_ISO_PARTITION /* Experimental */
+
+
+
+
+/************************************************************
+ * RTC
+ ***********************************************************/
+#define CONFIG_RTC_MC146818
+#undef CONFIG_WATCHDOG			/* watchdog disabled		*/
+
+/*
+ * PCI stuff
+ */
+#define CONFIG_PCI                                /* include pci support */
+#define CONFIG_PCI_PNP                            /* pci plug-and-play */
+#define CONFIG_PCI_SCAN_SHOW
+
+#define	CFG_FIRST_PCI_IRQ   9
+#define	CFG_SECOND_PCI_IRQ  10 
+#define CFG_THIRD_PCI_IRQ   11 
+#define	CFG_FORTH_PCI_IRQ   12
+
+
+#endif	/* __CONFIG_H */