summaryrefslogtreecommitdiff
path: root/include/configs/sc520_cdp.h
diff options
context:
space:
mode:
authormushtaq khan <mushtaq_k@procsys.com>2007-04-20 14:23:02 +0530
committerWolfgang Denk <wd@denx.de>2007-05-15 23:25:37 +0200
commit66d9dbec1cc27d6398ee6cf84639dbe14971251e (patch)
tree55c162c1992cf22fb7a94cb71009e5a9e87f36f9 /include/configs/sc520_cdp.h
parent644e6fb4eb8be90ea04ba34b643a8bf019d680e0 (diff)
downloadu-boot-imx-66d9dbec1cc27d6398ee6cf84639dbe14971251e.zip
u-boot-imx-66d9dbec1cc27d6398ee6cf84639dbe14971251e.tar.gz
u-boot-imx-66d9dbec1cc27d6398ee6cf84639dbe14971251e.tar.bz2
Add driver for S-ATA-controller on Intel processors with South
Bridge, ICH-5, ICH-6 and ICH-7. Implementation: 1. Code is divided in to two files. All functions, which are controller specific are kept in "drivers/ata_piix.c" file and functions, which are not controller specific, are kept in "common/cmd_sata.c" file. 2. Reading and Writing from the S-ATA drive is done using PIO method. 3. Driver can be configured for 48-bit addressing by defining macro CONFIG_LBA48, if this macro is not defined driver uses the 28-bit addressing. 4. S-ATA read function is hooked to the File system, commands like ext2ls and ext2load file can be used. This has been tested. 5. U-Boot command "SATA_init" is added, which initializes the S-ATA controller and identifies the S-ATA drives connected to it. 6. U-Boot command "sata" is added, which is used to read/write, print partition table and get info about the drives present. This I have implemented in same way as "ide" command is implemented in U-Boot. 7. This driver is for S-ATA in native mode. 8. This driver does not support the Native command queuing and Hot-plugging. Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com>
Diffstat (limited to 'include/configs/sc520_cdp.h')
-rw-r--r--include/configs/sc520_cdp.h9
1 files changed, 9 insertions, 0 deletions
diff --git a/include/configs/sc520_cdp.h b/include/configs/sc520_cdp.h
index d7d07a6..8b2ec07 100644
--- a/include/configs/sc520_cdp.h
+++ b/include/configs/sc520_cdp.h
@@ -182,6 +182,15 @@
#undef CONFIG_IDE_RESET_ROUTINE /* no special reset function */
/************************************************************
+*SATA/Native Stuff
+************************************************************/
+#define CFG_SATA_SUPPORTED 1
+#define CFG_SATA_MAXBUS 2 /*Max Sata buses supported */
+#define CFG_SATA_DEVS_PER_BUS 2 /*Max no. of devices per bus/port */
+#define CFG_SATA_MAXDEVICES (CFG_SATA_MAXBUS* CFG_SATA_DEVS_PER_BUS)
+#define CFG_ATA_PIIX 1 /*Supports ata_piix driver */
+
+/************************************************************
* ATAPI support (experimental)
************************************************************/
#define CONFIG_ATAPI /* enable ATAPI Support */