Sync'd u-boot-net with mainline

Merge git://www.denx.de/git/u-boot

Conflicts:

	drivers/bcm570x.c
	drivers/tigon3.c

1 files changed, 38 insertions, 27 deletions

diff --git a/include/configs/sc3.h b/include/configs/sc3.h
index 6b6acfa..cb22536 100644
--- a/include/configs/sc3.h
+++ b/include/configs/sc3.h
@@ -58,7 +58,7 @@
  * 0xFFE00000 .... 0xFFFFFFFF -> BOOT-ROM (2 MiB)
  */
 
-#define CONFIG_SOLIDCARD3	1
+#define CONFIG_SC3	1
 #define CONFIG_4xx	1
 #define CONFIG_405GP	1
 
@@ -68,8 +68,7 @@
  * Define IDE_USES_ISA_EMULATION for slower IDE access in the ISA-IO address range
  * If undefined, IDE access uses a seperat emulation with higher access speed.
  * Consider to inform your Linux IDE driver about the different addresses!
- * IDE_USES_ISA_EMULATION is only used if your CONFIG_COMMANDS macro includes
- * the CFG_CMD_IDE macro!
+ * IDE_USES_ISA_EMULATION is only used if you define CONFIG_CMD_IDE!
  */
 #define IDE_USES_ISA_EMULATION
 
@@ -134,7 +133,8 @@
 #if 1	/* feel free to disable for development */
 #define CONFIG_AUTOBOOT_KEYED		/* Enable password protection	*/
 #define CONFIG_AUTOBOOT_PROMPT		"\nSC3 - booting... stop with ENTER\n"
-#define CONFIG_AUTOBOOT_DELAY_STR	"\n"	/* 1st "password"	*/
+#define CONFIG_AUTOBOOT_DELAY_STR	"\r"	/* 1st "password"	*/
+#define CONFIG_AUTOBOOT_DELAY_STR2	"\n"	/* 1st "password"	*/
 #endif
 
 /*
@@ -168,25 +168,36 @@
 #define CONFIG_MII 1			/* add 405GP MII PHY management		*/
 #define CONFIG_PHY_ADDR 1	/* the connected Phy defaults to address 1 */
 
-#define CONFIG_COMMANDS	  \
-	   (CONFIG_CMD_DFL	| \
-			CFG_CMD_AUTOSCRIPT	| \
-			CFG_CMD_PCI		| \
-			CFG_CMD_IRQ		| \
-			CFG_CMD_NET		| \
-			CFG_CMD_MII		| \
-			CFG_CMD_PING		| \
-			CFG_CMD_NAND		| \
-			CFG_CMD_JFFS2		| \
-			CFG_CMD_I2C		| \
-			CFG_CMD_IDE		| \
-			CFG_CMD_DATE		| \
-			CFG_CMD_DHCP		| \
-			CFG_CMD_CACHE		| \
-			CFG_CMD_ELF	)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+
+#define CONFIG_CMD_AUTOSCRIPT
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_ELF
+
 
 #undef CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -276,7 +287,7 @@
  * External peripheral base address
  *-----------------------------------------------------------------------
  */
-#if !(CONFIG_COMMANDS & CFG_CMD_IDE)
+#if !defined(CONFIG_CMD_IDE)
 
 #undef	CONFIG_IDE_LED			/* no led for ide supported	*/
 #undef	CONFIG_IDE_RESET		/* no reset for ide supported	*/
@@ -285,7 +296,7 @@
  * IDE/ATA stuff
  *-----------------------------------------------------------------------
  */
-#else /* !(CONFIG_COMMANDS & CFG_CMD_IDE) */
+#else
 #define CONFIG_START_IDE	1	/* check, if use IDE */
 
 #undef	CONFIG_IDE_8xx_DIRECT		/* no pcmcia interface required */
@@ -345,7 +356,7 @@
 
 #endif /* IDE_USES_ISA_EMULATION */
 
-#endif /* !(CONFIG_COMMANDS & CFG_CMD_IDE) */
+#endif
 
 /*
 #define	CFG_KEY_REG_BASE_ADDR	0xF0100000
@@ -436,7 +447,7 @@ extern unsigned long offsetOfEnvironment;
 
 #define CFG_CACHELINE_SIZE 32
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
  #define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
 #endif