summaryrefslogtreecommitdiff
path: root/include/configs/sbc8560.h
diff options
context:
space:
mode:
authorTimur Tabi <timur@freescale.com>2011-08-04 18:03:41 -0500
committerKumar Gala <galak@kernel.crashing.org>2011-09-29 19:01:04 -0500
commite46fedfeb214d118b9983d11fcc929ed49f5ccd7 (patch)
tree082992bbcb09217952f6f758ef78d74460cc2458 /include/configs/sbc8560.h
parentb6c3722dfa98a68236301ddf525dfaf90a95224f (diff)
downloadu-boot-imx-e46fedfeb214d118b9983d11fcc929ed49f5ccd7.zip
u-boot-imx-e46fedfeb214d118b9983d11fcc929ed49f5ccd7.tar.gz
u-boot-imx-e46fedfeb214d118b9983d11fcc929ed49f5ccd7.tar.bz2
powerpc/85xx: introduce and document CONFIG_SYS_CCSRBAR macros
Introduce the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, which contain the high and low portions of CONFIG_SYS_CCSRBAR_PHYS. This is necessary for the assembly-language code that relocates CCSR, since the assembler does not understand 64-bit constants. CONFIG_SYS_CCSRBAR_PHYS is automatically defined from the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, so it should not be defined in a board header file. Similarly, CONFIG_SYS_CCSRBAR_DEFAULT is defined for each SOC in config_mpc85xx.h, so it should also not be defined in the board header file. CONFIG_SYS_CCSR_DO_NOT_RELOCATE is a "short-cut" macro that guarantees that CONFIG_SYS_CCSRBAR_PHYS is set to the same value as CONFIG_SYS_CCSRBAR_DEFAULT, and so CCSR will not be relocated. Since CONFIG_SYS_CCSRBAR_DEFAULT is locked to a fixed value, multi-stage U-Boot builds (e.g. NAND) are required to relocate CCSR only during the last stage (i.e. the "real" U-Boot). All other stages should define CONFIG_SYS_CCSR_DO_NOT_RELOCATE to ensure that CCSR is not relocated. README is updated with descriptions of all the CONFIG_SYS_CCSRBAR_xxx macros. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Diffstat (limited to 'include/configs/sbc8560.h')
-rw-r--r--include/configs/sbc8560.h14
1 files changed, 0 insertions, 14 deletions
diff --git a/include/configs/sbc8560.h b/include/configs/sbc8560.h
index 435b148..e0af0d2 100644
--- a/include/configs/sbc8560.h
+++ b/include/configs/sbc8560.h
@@ -92,20 +92,6 @@
#error "You can only use ONE of PCI Ethernet Card or TSEC Ethernet or CPM FCC."
#endif
-/*
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- */
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
-
-#if XXX
- #define CONFIG_SYS_CCSRBAR 0xfdf00000 /* relocated CCSRBAR */
-#else
- #define CONFIG_SYS_CCSRBAR 0xff700000 /* default CCSRBAR */
-#endif
-#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */
-#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */
-
#define CONFIG_SYS_SDRAM_SIZE 512 /* DDR is 512MB */
/* DDR Setup */