Merge 'next' branch

Conflicts:

	board/freescale/mpc8536ds/mpc8536ds.c
	include/configs/mgcoge.h

Signed-off-by: Wolfgang Denk <wd@denx.de>

1 files changed, 34 insertions, 34 deletions

diff --git a/include/configs/r2dplus.h b/include/configs/r2dplus.h
index 41a2a15..6921759 100644
--- a/include/configs/r2dplus.h
+++ b/include/configs/r2dplus.h
@@ -36,66 +36,66 @@
 #define CONFIG_ENV_OVERWRITE	1
 
 /* SDRAM */
-#define CFG_SDRAM_BASE		(0x8C000000)
-#define CFG_SDRAM_SIZE		(0x04000000)
-
-#define CFG_LONGHELP
-#define CFG_PROMPT		"=> "
-#define CFG_CBSIZE		256
-#define CFG_PBSIZE		256
-#define CFG_MAXARGS		16
-#define CFG_BARGSIZE		512
+#define CONFIG_SYS_SDRAM_BASE		(0x8C000000)
+#define CONFIG_SYS_SDRAM_SIZE		(0x04000000)
+
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_PROMPT		"=> "
+#define CONFIG_SYS_CBSIZE		256
+#define CONFIG_SYS_PBSIZE		256
+#define CONFIG_SYS_MAXARGS		16
+#define CONFIG_SYS_BARGSIZE		512
 /* List of legal baudrate settings for this board */
-#define CFG_BAUDRATE_TABLE	{ 115200, 57600, 38400, 19200, 9600 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 115200, 57600, 38400, 19200, 9600 }
 
-#define CFG_MEMTEST_START	(CFG_SDRAM_BASE)
-#define CFG_MEMTEST_END		(TEXT_BASE - 0x100000)
+#define CONFIG_SYS_MEMTEST_START	(CONFIG_SYS_SDRAM_BASE)
+#define CONFIG_SYS_MEMTEST_END		(TEXT_BASE - 0x100000)
 
-#define CFG_LOAD_ADDR		(CFG_SDRAM_BASE + 32 * 1024 * 1024)
+#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 32 * 1024 * 1024)
 /* Address of u-boot image in Flash */
-#define CFG_MONITOR_BASE	(CFG_FLASH_BASE)
-#define CFG_MONITOR_LEN		(256 * 1024)
+#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE)
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)
 /* Size of DRAM reserved for malloc() use */
-#define CFG_MALLOC_LEN		(1024 * 1024)
+#define CONFIG_SYS_MALLOC_LEN		(1024 * 1024)
 /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_SIZE	(256)
-#define CFG_BOOTMAPSZ		(8 * 1024 * 1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	(256)
+#define CONFIG_SYS_BOOTMAPSZ		(8 * 1024 * 1024)
 
 /*
  * NOR Flash ( Spantion S29GL256P )
  */
-#define CFG_FLASH_CFI
+#define CONFIG_SYS_FLASH_CFI
 #define CONFIG_FLASH_CFI_DRIVER
-#define CFG_FLASH_BASE		(0xA0000000)
-#define CFG_MAX_FLASH_BANKS (1)
-#define CFG_MAX_FLASH_SECT  256
-#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+#define CONFIG_SYS_FLASH_BASE		(0xA0000000)
+#define CONFIG_SYS_MAX_FLASH_BANKS (1)
+#define CONFIG_SYS_MAX_FLASH_SECT  256
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
 
 #define CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_ENV_SECT_SIZE	0x40000
 #define CONFIG_ENV_SIZE        (CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_ADDR        (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+#define CONFIG_ENV_ADDR        (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
 
 /*
  * SuperH Clock setting
  */
 #define CONFIG_SYS_CLK_FREQ	60000000
 #define TMU_CLK_DIVIDER		4
-#define CFG_HZ			(CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
-#define	CFG_PLL_SETTLING_TIME	100/* in us */
+#define CONFIG_SYS_HZ			(CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
+#define	CONFIG_SYS_PLL_SETTLING_TIME	100/* in us */
 
 /*
  * IDE support
  */
 #define CONFIG_IDE_RESET	1
-#define CFG_PIO_MODE		1
-#define CFG_IDE_MAXBUS		1 /* IDE bus */
-#define CFG_IDE_MAXDEVICE	1
-#define CFG_ATA_BASE_ADDR	0xb4000000
-#define CFG_ATA_STRIDE		2 /* 1bit shift */
-#define CFG_ATA_DATA_OFFSET	0x1000	/* data reg offset */
-#define CFG_ATA_REG_OFFSET	0x1000	/* reg offset */
-#define CFG_ATA_ALT_OFFSET	0x800	/* alternate register offset */
+#define CONFIG_SYS_PIO_MODE		1
+#define CONFIG_SYS_IDE_MAXBUS		1 /* IDE bus */
+#define CONFIG_SYS_IDE_MAXDEVICE	1
+#define CONFIG_SYS_ATA_BASE_ADDR	0xb4000000
+#define CONFIG_SYS_ATA_STRIDE		2 /* 1bit shift */
+#define CONFIG_SYS_ATA_DATA_OFFSET	0x1000	/* data reg offset */
+#define CONFIG_SYS_ATA_REG_OFFSET	0x1000	/* reg offset */
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x800	/* alternate register offset */
 
 /*
  * SuperH PCI Bridge Configration