summaryrefslogtreecommitdiff
path: root/include/configs/ppmc7xx.h
diff options
context:
space:
mode:
authorWolfgang Denk <wd@pollux.denx.de>2006-07-19 13:50:38 +0200
committerWolfgang Denk <wd@pollux.denx.de>2006-07-19 13:50:38 +0200
commitb87dfd2854809ddcf4be54d772752e7ed137386f (patch)
treed10a0446c375a2961223f12f553a51422bff553a /include/configs/ppmc7xx.h
parentf3e06df7e89a1b6ff6701d523b4beea6e3fa5159 (diff)
downloadu-boot-imx-b87dfd2854809ddcf4be54d772752e7ed137386f.zip
u-boot-imx-b87dfd2854809ddcf4be54d772752e7ed137386f.tar.gz
u-boot-imx-b87dfd2854809ddcf4be54d772752e7ed137386f.tar.bz2
Add support for TB5200 board
The TB5200 ("Tinybox") is a small baseboard for the TQM5200 module integrated in a little aluminium case. Patch by Martin Krause, 8 Jun 2006 Some code cleanup
Diffstat (limited to 'include/configs/ppmc7xx.h')
-rw-r--r--include/configs/ppmc7xx.h70
1 files changed, 35 insertions, 35 deletions
diff --git a/include/configs/ppmc7xx.h b/include/configs/ppmc7xx.h
index ea15524..072b9dd 100644
--- a/include/configs/ppmc7xx.h
+++ b/include/configs/ppmc7xx.h
@@ -1,9 +1,9 @@
/*
* ppmc7xx.h
* ---------
- *
+ *
* Wind River PPMC 7xx/74xx board configuration file.
- *
+ *
* By Richard Danter (richard.danter@windriver.com)
* Copyright (C) 2005 Wind River Systems
*/
@@ -16,15 +16,15 @@
/*===================================================================
- *
+ *
* User configurable settings - Modify to your preference
- *
+ *
*===================================================================
*/
/*
* Debug
- *
+ *
* DEBUG - Define this is you want extra debug info
* GTREGREAD - Required to build with debug
* do_bdinfo - Required to build with debug
@@ -37,7 +37,7 @@
/*
* CPU type
- *
+ *
* CONFIG_7xx - We have a 750 or 755 CPU
* CONFIG_74xx - We have a 7400 CPU
* CONFIG_ALTIVEC - We have altivec enabled CPU (only 7400)
@@ -52,11 +52,11 @@
/*
* Monitor configuration
- *
+ *
* CONFIG_COMMANDS - List of command sets to include in shell
- *
+ *
* The following command sets have been tested and known to work:
- *
+ *
* CFG_CMD_CACHE - Cache control commands
* CFG_CMD_MEMORY - Memory display, change and test commands
* CFG_CMD_FLASH - Erase and program flash
@@ -91,7 +91,7 @@
/*
* PCI config
- *
+ *
* CONFIG_PCI - Enable PCI bus
* CONFIG_PCI_PNP - Enable Plug & Play support
* CONFIG_PCI_SCAN_SHOW - Enable display of devices at startup
@@ -104,7 +104,7 @@
/*
* Network config
- *
+ *
* CONFIG_NET_MULTI - Support for multiple network interfaces
* CONFIG_EEPRO100 - Intel 8255x Ethernet Controller
* CONFIG_EEPRO100_SROM_WRITE - Enable writing to network card ROM
@@ -117,18 +117,18 @@
/*
* Enable extra init functions
- *
+ *
* CONFIG_MISC_INIT_F - Call pre-relocation init functions
* CONFIG_MISC_INIT_R - Call post relocation init functions
*/
#undef CONFIG_MISC_INIT_F
-#define CONFIG_MISC_INIT_R
+#define CONFIG_MISC_INIT_R
/*
* Boot config
- *
+ *
* CONFIG_BOOTCOMMAND - Command(s) to execute to auto-boot
* CONFIG_BOOTDELAY - How long to wait before auto-boot (in sec)
*/
@@ -142,9 +142,9 @@
/*===================================================================
- *
+ *
* Board configuration settings - You should not need to modify these
- *
+ *
*===================================================================
*/
@@ -154,9 +154,9 @@
/*
* Memory map
- *
+ *
* This board runs in a standard CHRP (Map-B) configuration.
- *
+ *
* Type Start End Size Width Chip Sel
* ----------- ----------- ----------- ------- ------- --------
* SDRAM 0x00000000 0x04000000 64MB 64b SDRAMCS0
@@ -164,9 +164,9 @@
* UART 0x7C000000 RCS2
* Mailbox 0xFF000000 RCS1
* Flash 0xFFC00000 0xFFFFFFFF 4MB 64b RCS0
- *
+ *
* Flash sectors are laid out as follows.
- *
+ *
* Sector Start End Size Comments
* ------- ----------- ----------- ------- -----------
* 0 0xFFC00000 0xFFC3FFFF 256KB
@@ -193,7 +193,7 @@
/*
* SDRAM config - see memory map details above.
- *
+ *
* CFG_SDRAM_BASE - Start address of SDRAM, this _must_ be zero!
* CFG_SDRAM_SIZE - Total size of contiguous SDRAM bank(s)
*/
@@ -202,9 +202,9 @@
#define CFG_SDRAM_SIZE 0x04000000
-/*
+/*
* Flash config - see memory map details above.
- *
+ *
* CFG_FLASH_BASE - Start address of flash memory
* CFG_FLASH_SIZE - Total size of contiguous flash mem
* CFG_FLASH_ERASE_TOUT - Erase timeout in ms
@@ -223,7 +223,7 @@
/*
* Monitor config - see memory map details above
- *
+ *
* CFG_MONITOR_BASE - Base address of monitor code
* CFG_MALLOC_LEN - Size of malloc pool (128KB)
*/
@@ -234,7 +234,7 @@
/*
* Command shell settings
- *
+ *
* CFG_BARGSIZE - Boot Argument buffer size
* CFG_BOOTMAPSZ - Size of app's mapped RAM at boot (Linux=8MB)
* CFG_CBSIZE - Console Buffer (input) size
@@ -261,10 +261,10 @@
/*
* Environment config - see memory map details above
- *
+ *
* CFG_ENV_IS_IN_FLASH - The env variables are stored in flash
* CFG_ENV_ADDR - Address of the sector containing env vars
- * CFG_ENV_SIZE - Ammount of RAM for env vars (used to save RAM, 4KB)
+ * CFG_ENV_SIZE - Ammount of RAM for env vars (used to save RAM, 4KB)
* CFG_ENV_SECT_SIZE - Size of sector containing env vars (32KB)
*/
@@ -282,7 +282,7 @@
* Since the main system RAM is initialised very early, we place the INIT_RAM
* in the main system RAM just above the exception vectors. The contents are
* copied to top of RAM by the init code.
- *
+ *
* CFG_INIT_RAM_ADDR - Address of Init RAM, above exception vect
* CFG_INIT_RAM_END - Size of Init RAM
* CFG_GBL_DATA_SIZE - Ammount of RAM to reserve for global data
@@ -297,7 +297,7 @@
/*
* Initial BAT config
- *
+ *
* BAT0 - System SDRAM
* BAT1 - LED's and Serial Port
* BAT2 - PCI Memory
@@ -327,7 +327,7 @@
/*
* Cache config
- *
+ *
* CFG_CACHELINE_SIZE - Size of a cache line (CPU specific)
* CFG_L2 - L2 cache enabled if defined
* L2_INIT - L2 cache init flags
@@ -342,7 +342,7 @@
/*
* Clocks config
- *
+ *
* CFG_BUS_HZ - Bus clock frequency in Hz
* CFG_BUS_CLK - As above (?)
* CFG_HZ - Decrementer freq in Hz
@@ -355,7 +355,7 @@
/*
* Serial port config
- *
+ *
* CFG_BAUDRATE_TABLE - List of valid baud rates
* CFG_NS16550 - Include the NS16550 driver
* CFG_NS16550_SERIAL - Include the serial (wrapper) driver
@@ -398,7 +398,7 @@
/*
* Extra init functions
- *
+ *
* CFG_BOARD_ASM_INIT - Call assembly init code
*/
@@ -407,11 +407,11 @@
/*
* Boot flags
- *
+ *
* BOOTFLAG_COLD - Indicates a power-on boot
* BOOTFLAG_WARM - Indicates a software reset
*/
-
+
#define BOOTFLAG_COLD 0x01
#define BOOTFLAG_WARM 0x02