rename CFG_ macros to CONFIG_SYS

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

1 files changed, 113 insertions, 113 deletions

diff --git a/include/configs/pcu_e.h b/include/configs/pcu_e.h
index 664a885..9214519 100644
--- a/include/configs/pcu_e.h
+++ b/include/configs/pcu_e.h
@@ -61,7 +61,7 @@
 	"bootm"
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -75,8 +75,8 @@
 #define	CONFIG_SPI_X			/* 16 bit EEPROM addressing	*/
 
 #define CONFIG_HARD_I2C		1	/* I2C with hardware support	*/
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
 
 /* ----------------------------------------------------------------
@@ -87,7 +87,7 @@
  * far enough from the start of the data area (as well as from the
  * stack pointer).
  * ---------------------------------------------------------------- */
-#define CFG_SPI_INIT_OFFSET		0xB00
+#define CONFIG_SYS_SPI_INIT_OFFSET		0xB00
 
 
 /*
@@ -114,60 +114,60 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x00100000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x00F00000	/* 1 ... 15MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x00F00000	/* 1 ... 15MB in DRAM	*/
 
-#define	CFG_LOAD_ADDR		0x00100000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0x00100000	/* default load address	*/
 
-#define	CFG_PIO_MODE		0	/* IDE interface in PIO Mode 0	*/
+#define	CONFIG_SYS_PIO_MODE		0	/* IDE interface in PIO Mode 0	*/
 
 /* Ethernet hardware configuration done using port pins */
-#define CFG_PB_ETH_RESET	0x00000020		/* PB 26	*/
+#define CONFIG_SYS_PB_ETH_RESET	0x00000020		/* PB 26	*/
 #if PCU_E_WITH_SWAPPED_CS /* XXX */
-#define CFG_PA_ETH_MDDIS	0x4000			/* PA  1	*/
-#define CFG_PB_ETH_POWERDOWN	0x00000800		/* PB 20	*/
-#define CFG_PB_ETH_CFG1		0x00000400		/* PB 21	*/
-#define CFG_PB_ETH_CFG2		0x00000200		/* PB 22	*/
-#define CFG_PB_ETH_CFG3		0x00000100		/* PB 23	*/
+#define CONFIG_SYS_PA_ETH_MDDIS	0x4000			/* PA  1	*/
+#define CONFIG_SYS_PB_ETH_POWERDOWN	0x00000800		/* PB 20	*/
+#define CONFIG_SYS_PB_ETH_CFG1		0x00000400		/* PB 21	*/
+#define CONFIG_SYS_PB_ETH_CFG2		0x00000200		/* PB 22	*/
+#define CONFIG_SYS_PB_ETH_CFG3		0x00000100		/* PB 23	*/
 #else /* XXX */
-#define CFG_PB_ETH_MDDIS	0x00000010		/* PB 27	*/
-#define CFG_PB_ETH_POWERDOWN	0x00000100		/* PB 23	*/
-#define CFG_PB_ETH_CFG1		0x00000200		/* PB 22	*/
-#define CFG_PB_ETH_CFG2		0x00000400		/* PB 21	*/
-#define CFG_PB_ETH_CFG3		0x00000800		/* PB 20	*/
+#define CONFIG_SYS_PB_ETH_MDDIS	0x00000010		/* PB 27	*/
+#define CONFIG_SYS_PB_ETH_POWERDOWN	0x00000100		/* PB 23	*/
+#define CONFIG_SYS_PB_ETH_CFG1		0x00000200		/* PB 22	*/
+#define CONFIG_SYS_PB_ETH_CFG2		0x00000400		/* PB 21	*/
+#define CONFIG_SYS_PB_ETH_CFG3		0x00000800		/* PB 20	*/
 #endif /* XXX */
 
 /* Ethernet settings:
  * MDIO enabled, autonegotiation, 10/100Mbps, half/full duplex
  */
-#define CFG_ETH_MDDIS_VALUE	0
-#define CFG_ETH_CFG1_VALUE	1
-#define CFG_ETH_CFG2_VALUE	1
-#define CFG_ETH_CFG3_VALUE	1
+#define CONFIG_SYS_ETH_MDDIS_VALUE	0
+#define CONFIG_SYS_ETH_CFG1_VALUE	1
+#define CONFIG_SYS_ETH_CFG2_VALUE	1
+#define CONFIG_SYS_ETH_CFG3_VALUE	1
 
 /* PUMA configuration */
 #if PCU_E_WITH_SWAPPED_CS /* XXX */
-#define CFG_PB_PUMA_PROG	0x00000010		/* PB 27	*/
+#define CONFIG_SYS_PB_PUMA_PROG	0x00000010		/* PB 27	*/
 #else /* XXX */
-#define CFG_PA_PUMA_PROG	0x4000			/* PA  1	*/
+#define CONFIG_SYS_PA_PUMA_PROG	0x4000			/* PA  1	*/
 #endif /* XXX */
-#define CFG_PC_PUMA_DONE	0x0008			/* PC 12	*/
-#define CFG_PC_PUMA_INIT	0x0004			/* PC 13	*/
+#define CONFIG_SYS_PC_PUMA_DONE	0x0008			/* PC 12	*/
+#define CONFIG_SYS_PC_PUMA_INIT	0x0004			/* PC 13	*/
 
-#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -177,53 +177,53 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xFE000000
+#define CONFIG_SYS_IMMR		0xFE000000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define	CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define	CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define	CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Address accessed to reset the board - must not be mapped/assigned
  */
-#define	CFG_RESET_ADDRESS	0xFEFFFFFF
+#define	CONFIG_SYS_RESET_ADDRESS	0xFEFFFFFF
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define	CFG_SDRAM_BASE		0x00000000
+#define	CONFIG_SYS_SDRAM_BASE		0x00000000
 /* this is an ugly hack needed because of the silly non-constant address map */
-#define CFG_FLASH_BASE		(0-flash_info[0].size-flash_info[1].size)
+#define CONFIG_SYS_FLASH_BASE		(0-flash_info[0].size-flash_info[1].size)
 
 #if defined(DEBUG)
-#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
 #else
-#define	CFG_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
+#define	CONFIG_SYS_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
 #endif
-#define CFG_MONITOR_BASE	TEXT_BASE
-#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	160	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	160	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	180000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	1000	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	180000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	1000	/* Timeout for Flash Write (in ms)	*/
 
 #if 0
 /* Start port with environment in flash; switch to SPI EEPROM later */
@@ -235,8 +235,8 @@
 #else
 /* Final version: environment in EEPROM */
 #define CONFIG_ENV_IS_IN_EEPROM	1
-#define CFG_I2C_EEPROM_ADDR	0
-#define CFG_I2C_EEPROM_ADDR_LEN	2
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
 #define CONFIG_ENV_OFFSET		1024
 #define CONFIG_ENV_SIZE		1024
 #endif
@@ -244,8 +244,8 @@
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 
 /*-----------------------------------------------------------------------
  * SYPCR - System Protection Control				11-9
@@ -254,10 +254,10 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 #endif
 
 /*-----------------------------------------------------------------------
@@ -268,21 +268,21 @@
  * Asynchronous external master enable.
  */
 /* => 0x70600200 */
-#define CFG_SIUMCR	(SIUMCR_EARP7 | SIUMCR_DBGC11 | SIUMCR_AEME)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_EARP7 | SIUMCR_DBGC11 | SIUMCR_AEME)
 
 /*-----------------------------------------------------------------------
  * TBSCR - Time Base Status and Control				11-26
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
@@ -291,15 +291,15 @@
  * interrupt status bit, set PLL multiplication factor !
  */
 /* 0x00004080 */
-#define	CFG_PLPRCR_MF	0	/* (0+1) * 50 = 50 MHz Clock */
-#define CFG_PLPRCR							\
-		(	(CFG_PLPRCR_MF << PLPRCR_MF_SHIFT) |		\
+#define	CONFIG_SYS_PLPRCR_MF	0	/* (0+1) * 50 = 50 MHz Clock */
+#define CONFIG_SYS_PLPRCR							\
+		(	(CONFIG_SYS_PLPRCR_MF << PLPRCR_MF_SHIFT) |		\
 			PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST |	\
 			/*PLPRCR_CSRC|*/ PLPRCR_LPM_NORMAL |		\
 			PLPRCR_CSR    /*| PLPRCR_LOLRE|PLPRCR_FIOPD*/	\
 		)
 
-#define	CONFIG_8xx_GCLK_FREQ	((CFG_PLPRCR_MF+1)*50000000)
+#define	CONFIG_8xx_GCLK_FREQ	((CONFIG_SYS_PLPRCR_MF+1)*50000000)
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock and reset Control Register		15-27
@@ -311,7 +311,7 @@
  */
 #define SCCR_MASK	SCCR_EBDF11
 /* 0x01800000 */
-#define CFG_SCCR	(SCCR_COM00	| /*SCCR_TBS|*/		\
+#define CONFIG_SYS_SCCR	(SCCR_COM00	| /*SCCR_TBS|*/		\
 			 SCCR_RTDIV	|   SCCR_RTSEL	  |	\
 			 /*SCCR_CRQEN|*/  /*SCCR_PRQEN|*/	\
 			 SCCR_EBDF00 |   SCCR_DFSYNC00 |	\
@@ -328,34 +328,34 @@
  * Don't expect the "date" command to work without a 32kHz clock input!
  */
 /* 0x00C3 => 0x0003 */
-#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
+#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
 
 
 /*-----------------------------------------------------------------------
  * RCCR - RISC Controller Configuration Register		19-4
  *-----------------------------------------------------------------------
  */
-#define CFG_RCCR 0x0000
+#define CONFIG_SYS_RCCR 0x0000
 
 /*-----------------------------------------------------------------------
  * RMDS - RISC Microcode Development Support Control Register
  *-----------------------------------------------------------------------
  */
-#define CFG_RMDS 0
+#define CONFIG_SYS_RMDS 0
 
 /*-----------------------------------------------------------------------
  *
  * Interrupt Levels
  *-----------------------------------------------------------------------
  */
-#define CFG_CPM_INTERRUPT	13	/* SIU_LEVEL6	*/
+#define CONFIG_SYS_CPM_INTERRUPT	13	/* SIU_LEVEL6	*/
 
 /*-----------------------------------------------------------------------
  *
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_DER	0
+#define CONFIG_SYS_DER	0
 
 /*
  * Init Memory Controller:
@@ -374,27 +374,27 @@
  * used to re-map FLASH: restrict access enough but not too much to
  * meddle with FLASH accesses
  */
-#define CFG_REMAP_OR_AM		0xFF800000	/* OR addr mask */
-#define CFG_PRELIM_OR_AM	0xFF800000	/* OR addr mask */
+#define CONFIG_SYS_REMAP_OR_AM		0xFF800000	/* OR addr mask */
+#define CONFIG_SYS_PRELIM_OR_AM	0xFF800000	/* OR addr mask */
 
 /* FLASH timing: CSNT = 0, ACS = 00, SCY = 8, EHTR = 1			*/
-#define CFG_OR_TIMING_FLASH	(OR_SCY_8_CLK | OR_EHTR)
+#define CONFIG_SYS_OR_TIMING_FLASH	(OR_SCY_8_CLK | OR_EHTR)
 
-#define CFG_OR0_REMAP	( CFG_REMAP_OR_AM | OR_ACS_DIV1 | OR_BI | \
-				CFG_OR_TIMING_FLASH)
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | OR_ACS_DIV1 | OR_BI | \
-				CFG_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_REMAP	( CONFIG_SYS_REMAP_OR_AM | OR_ACS_DIV1 | OR_BI | \
+				CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | OR_ACS_DIV1 | OR_BI | \
+				CONFIG_SYS_OR_TIMING_FLASH)
 /* 16 bit, bank valid */
-#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V )
+#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V )
 
 #if PCU_E_WITH_SWAPPED_CS /* XXX */
-#define CFG_OR6_REMAP	CFG_OR0_REMAP
-#define CFG_OR6_PRELIM	CFG_OR0_PRELIM
-#define CFG_BR6_PRELIM	((FLASH_BASE6_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V )
+#define CONFIG_SYS_OR6_REMAP	CONFIG_SYS_OR0_REMAP
+#define CONFIG_SYS_OR6_PRELIM	CONFIG_SYS_OR0_PRELIM
+#define CONFIG_SYS_BR6_PRELIM	((FLASH_BASE6_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V )
 #else /* XXX */
-#define CFG_OR1_REMAP	CFG_OR0_REMAP
-#define CFG_OR1_PRELIM	CFG_OR0_PRELIM
-#define CFG_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V )
+#define CONFIG_SYS_OR1_REMAP	CONFIG_SYS_OR0_REMAP
+#define CONFIG_SYS_OR1_PRELIM	CONFIG_SYS_OR0_PRELIM
+#define CONFIG_SYS_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V )
 #endif /* XXX */
 
 /*
@@ -413,11 +413,11 @@
 #define SDRAM_MAX_SIZE		0x04000000	/* max 64 MB SDRAM */
 
 #if PCU_E_WITH_SWAPPED_CS /* XXX */
-#define CFG_OR5_PRELIM	(SDRAM_PRELIM_OR_AM | SDRAM_TIMING )
-#define CFG_BR5_PRELIM	((SDRAM_BASE5_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define CONFIG_SYS_OR5_PRELIM	(SDRAM_PRELIM_OR_AM | SDRAM_TIMING )
+#define CONFIG_SYS_BR5_PRELIM	((SDRAM_BASE5_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 #else /* XXX */
-#define CFG_OR2_PRELIM	(SDRAM_PRELIM_OR_AM | SDRAM_TIMING )
-#define CFG_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define CONFIG_SYS_OR2_PRELIM	(SDRAM_PRELIM_OR_AM | SDRAM_TIMING )
+#define CONFIG_SYS_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 #endif /* XXX */
 
 /*
@@ -429,11 +429,11 @@
 #define CAN_CTRLR_TIMING	(OR_BI | OR_SCY_8_CLK | OR_SETA | OR_EHTR)
 
 #if PCU_E_WITH_SWAPPED_CS /* XXX */
-#define CFG_BR4_PRELIM		((CAN_CTRLR_BASE & BR_BA_MSK) | BR_PS_8 | BR_V)
-#define CFG_OR4_PRELIM		(CAN_CTRLR_OR_AM | CAN_CTRLR_TIMING)
+#define CONFIG_SYS_BR4_PRELIM		((CAN_CTRLR_BASE & BR_BA_MSK) | BR_PS_8 | BR_V)
+#define CONFIG_SYS_OR4_PRELIM		(CAN_CTRLR_OR_AM | CAN_CTRLR_TIMING)
 #else /* XXX */
-#define CFG_BR3_PRELIM		((CAN_CTRLR_BASE & BR_BA_MSK) | BR_PS_8 | BR_V)
-#define CFG_OR3_PRELIM		(CAN_CTRLR_OR_AM | CAN_CTRLR_TIMING)
+#define CONFIG_SYS_BR3_PRELIM		((CAN_CTRLR_BASE & BR_BA_MSK) | BR_PS_8 | BR_V)
+#define CONFIG_SYS_OR3_PRELIM		(CAN_CTRLR_OR_AM | CAN_CTRLR_TIMING)
 #endif /* XXX */
 
 /*
@@ -461,11 +461,11 @@
 #define PUMA_CONF_OR_READ	(PUMA_CONF_OR_AM | PUMA_CONF_READ_TIMING)
 
 #if PCU_E_WITH_SWAPPED_CS /* XXX */
-#define CFG_BR3_PRELIM		PUMA_CONF_BR_READ
-#define CFG_OR3_PRELIM		PUMA_CONF_OR_READ
+#define CONFIG_SYS_BR3_PRELIM		PUMA_CONF_BR_READ
+#define CONFIG_SYS_OR3_PRELIM		PUMA_CONF_OR_READ
 #else /* XXX */
-#define CFG_BR4_PRELIM		PUMA_CONF_BR_READ
-#define CFG_OR4_PRELIM		PUMA_CONF_OR_READ
+#define CONFIG_SYS_BR4_PRELIM		PUMA_CONF_BR_READ
+#define CONFIG_SYS_OR4_PRELIM		PUMA_CONF_OR_READ
 #endif /* XXX */
 
 /*
@@ -477,11 +477,11 @@
 #define PUMA_SMA8_TIMING	(OR_BI | OR_SCY_0_CLK | OR_EHTR)
 
 #if PCU_E_WITH_SWAPPED_CS /* XXX */
-#define CFG_BR2_PRELIM		((PUMA_SMA8_BASE & BR_BA_MSK) | BR_PS_8 | BR_V)
-#define CFG_OR2_PRELIM		(PUMA_SMA8_OR_AM | PUMA_SMA8_TIMING | OR_SETA)
+#define CONFIG_SYS_BR2_PRELIM		((PUMA_SMA8_BASE & BR_BA_MSK) | BR_PS_8 | BR_V)
+#define CONFIG_SYS_OR2_PRELIM		(PUMA_SMA8_OR_AM | PUMA_SMA8_TIMING | OR_SETA)
 #else /* XXX */
-#define CFG_BR5_PRELIM		((PUMA_SMA8_BASE & BR_BA_MSK) | BR_PS_8 | BR_V)
-#define CFG_OR5_PRELIM		(PUMA_SMA8_OR_AM | PUMA_SMA8_TIMING | OR_SETA)
+#define CONFIG_SYS_BR5_PRELIM		((PUMA_SMA8_BASE & BR_BA_MSK) | BR_PS_8 | BR_V)
+#define CONFIG_SYS_OR5_PRELIM		(PUMA_SMA8_OR_AM | PUMA_SMA8_TIMING | OR_SETA)
 #endif /* XXX */
 
 /*
@@ -493,11 +493,11 @@
 #define PUMA_SMA16_TIMING	(OR_BI | OR_SCY_0_CLK | OR_EHTR)
 
 #if PCU_E_WITH_SWAPPED_CS /* XXX */
-#define CFG_BR1_PRELIM		((PUMA_SMA16_BASE & BR_BA_MSK) | BR_PS_16 | BR_V)
-#define CFG_OR1_PRELIM		(PUMA_SMA16_OR_AM | PUMA_SMA16_TIMING | OR_SETA)
+#define CONFIG_SYS_BR1_PRELIM		((PUMA_SMA16_BASE & BR_BA_MSK) | BR_PS_16 | BR_V)
+#define CONFIG_SYS_OR1_PRELIM		(PUMA_SMA16_OR_AM | PUMA_SMA16_TIMING | OR_SETA)
 #else /* XXX */
-#define CFG_BR6_PRELIM		((PUMA_SMA16_BASE & BR_BA_MSK) | BR_PS_16 | BR_V)
-#define CFG_OR6_PRELIM		(PUMA_SMA16_OR_AM | PUMA_SMA16_TIMING | OR_SETA)
+#define CONFIG_SYS_BR6_PRELIM		((PUMA_SMA16_BASE & BR_BA_MSK) | BR_PS_16 | BR_V)
+#define CONFIG_SYS_OR6_PRELIM		(PUMA_SMA16_OR_AM | PUMA_SMA16_TIMING | OR_SETA)
 #endif /* XXX */
 
 /*
@@ -508,15 +508,15 @@
 #define PUMA_FLASH_OR_AM	0xFE000000	/* 32 MB */
 #define PUMA_FLASH_TIMING	(OR_BI | OR_SCY_0_CLK | OR_EHTR)
 
-#define CFG_BR7_PRELIM		((PUMA_FLASH_BASE & BR_BA_MSK) | BR_PS_16 | BR_V)
-#define CFG_OR7_PRELIM		(PUMA_FLASH_OR_AM | PUMA_FLASH_TIMING | OR_SETA)
+#define CONFIG_SYS_BR7_PRELIM		((PUMA_FLASH_BASE & BR_BA_MSK) | BR_PS_16 | BR_V)
+#define CONFIG_SYS_OR7_PRELIM		(PUMA_FLASH_OR_AM | PUMA_FLASH_TIMING | OR_SETA)
 
 /*
  * Memory Periodic Timer Prescaler
  */
 
 /* periodic timer for refresh */
-#define CFG_MPTPR	0x0200
+#define CONFIG_SYS_MPTPR	0x0200
 
 /*
  * MAMR settings for SDRAM
@@ -525,9 +525,9 @@
  * 0x30904114 = - " - | Periodic Timer A Enable, MAMR_TLFB_4X
  */
 /* periodic timer for refresh */
-#define CFG_MAMR_PTA	0x30	/* = 48 */
+#define CONFIG_SYS_MAMR_PTA	0x30	/* = 48 */
 
-#define CFG_MAMR	( (CFG_MAMR_PTA << MAMR_PTA_SHIFT) | \
+#define CONFIG_SYS_MAMR	( (CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | \
 			  MAMR_AMA_TYPE_1	| \
 			  MAMR_G0CLA_A10	| \
 			  MAMR_RLFA_1X		| \