summaryrefslogtreecommitdiff
path: root/include/configs/p3mx.h
diff options
context:
space:
mode:
authorWolfgang Denk <wd@denx.de>2014-10-21 15:23:32 +0200
committerWolfgang Denk <wd@denx.de>2014-10-27 14:35:55 +0100
commit03b004074fb641cffd7d2150505ef8afc13231bf (patch)
tree93fe51aab1e2cc78646ddc8c9b5918dac9ed4ea3 /include/configs/p3mx.h
parentfc297789a231ded974d6194e74f7a0620fb4553e (diff)
downloadu-boot-imx-03b004074fb641cffd7d2150505ef8afc13231bf.zip
u-boot-imx-03b004074fb641cffd7d2150505ef8afc13231bf.tar.gz
u-boot-imx-03b004074fb641cffd7d2150505ef8afc13231bf.tar.bz2
PowerPC: drop some 74xx_7xx boards and related code
The file board/Marvell/include/mv_gen_reg.h is incompatible with the GPL (see for example the "MARVELL RESERVES THE RIGHT AT ITS SOLE DISCRETION TO REQUEST THAT THIS CODE BE IMMEDIATELY RETURNED TO MARVELL" clause). As this cannot be fixed, we remove the file and all code that depends on it. Fortunately this only affects some very old boards that have long reached EOL: CPCI750 DB64360 DB64460 p3m750 p3m7448 Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com> Cc: Stefan Roese <sr@denx.de> Cc: Roger Meier <r.meier@siemens.com>
Diffstat (limited to 'include/configs/p3mx.h')
-rw-r--r--include/configs/p3mx.h434
1 files changed, 0 insertions, 434 deletions
diff --git a/include/configs/p3mx.h b/include/configs/p3mx.h
deleted file mode 100644
index a210e29..0000000
--- a/include/configs/p3mx.h
+++ /dev/null
@@ -1,434 +0,0 @@
-/*
- * (C) Copyright 2006
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * Based on original work by
- * Roel Loeffen, (C) Copyright 2006 Prodrive B.V.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/************************************************************************
- * p3mx.h - configuration for Prodrive P3M750 & P3M7448 boards
- *
- * The defines:
- * CONFIG_P3M750 or
- * CONFIG_P3M7448
- * are written into include/config.h by the "make xxx_config" command
- ***********************************************************************/
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*-----------------------------------------------------------------------
- * High Level Configuration Options
- *----------------------------------------------------------------------*/
-#define CONFIG_P3Mx /* used for both board versions */
-
-#define CONFIG_SYS_TEXT_BASE 0xfff00000
-
-#if defined (CONFIG_P3M750)
-#define CONFIG_750FX /* 750GL/GX/FX */
-#define CONFIG_HIGH_BATS /* High BATs supported */
-#define CONFIG_SYS_BOARD_NAME "P3M750"
-#define CONFIG_SYS_BUS_CLK 100000000
-#define CONFIG_SYS_TCLK 100000000
-#elif defined (CONFIG_P3M7448)
-#define CONFIG_74xx
-#define CONFIG_SYS_BOARD_NAME "P3M7448"
-#define CONFIG_SYS_BUS_CLK 133333333
-#define CONFIG_SYS_TCLK 133333333
-#endif
-#define CONFIG_SYS_GT_DUAL_CPU /* also for JTAG even with one cpu */
-
-/* which initialization functions to call for this board */
-#define CONFIG_SYS_BOARD_ASM_INIT 1
-#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
-#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r() */
-
-/*-----------------------------------------------------------------------
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#ifdef CONFIG_P3M750
-#define CONFIG_SYS_SDRAM1_BASE 0x10000000 /* each 256 MByte */
-#endif
-
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#if defined (CONFIG_P3M750)
-#define CONFIG_SYS_FLASH_BASE 0xff800000 /* start of flash banks */
-#define CONFIG_SYS_BOOT_SIZE _8M /* boot flash */
-#elif defined (CONFIG_P3M7448)
-#define CONFIG_SYS_FLASH_BASE 0xff000000 /* start of flash banks */
-#define CONFIG_SYS_BOOT_SIZE _16M /* boot flash */
-#endif
-#define CONFIG_SYS_BOOT_SPACE CONFIG_SYS_FLASH_BASE /* BOOT_CS0 flash 0 */
-#define CONFIG_SYS_MONITOR_BASE 0xfff00000
-#define CONFIG_SYS_RESET_ADDRESS 0xfff00100
-#define CONFIG_SYS_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc */
-#define CONFIG_SYS_MISC_REGION_BASE 0xf0000000
-
-#define CONFIG_SYS_DFL_GT_REGS 0xf1000000 /* boot time GT_REGS */
-#define CONFIG_SYS_GT_REGS 0xf1000000 /* GT Registers are mapped here */
-#define CONFIG_SYS_INT_SRAM_BASE 0x42000000 /* GT offers 256k internal SRAM */
-
-/*-----------------------------------------------------------------------
- * Initial RAM & stack pointer (placed in internal SRAM)
- *----------------------------------------------------------------------*/
- /*
- * When locking data in cache you should point the CONFIG_SYS_INIT_RAM_ADDRESS
- * To an unused memory region. The stack will remain in cache until RAM
- * is initialized
-*/
-#undef CONFIG_SYS_INIT_RAM_LOCK
-#define CONFIG_SYS_INIT_RAM_ADDR 0x42000000
-#define CONFIG_SYS_INIT_RAM_SIZE 0x1000
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-
-
-/*-----------------------------------------------------------------------
- * Serial Port
- *----------------------------------------------------------------------*/
-#define CONFIG_MPSC /* MV64460 Serial */
-#define CONFIG_MPSC_PORT 0
-#define CONFIG_BAUDRATE 115200 /* console baudrate */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
-
-/*-----------------------------------------------------------------------
- * Ethernet
- *----------------------------------------------------------------------*/
-/* Change the default ethernet port, use this define (options: 0, 1, 2) */
-#define CONFIG_SYS_ETH_PORT ETH_0
-#define MV_ETH_DEVS 2
-#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
-#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
-
-/*-----------------------------------------------------------------------
- * FLASH related
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */
-#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
-#define CONFIG_SYS_FLASH_PROTECTION 1 /* use hardware flash protection */
-#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
-
-#define CONFIG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
-#if defined (CONFIG_P3M750)
-#define CONFIG_ENV_SECT_SIZE 0x20000 /* one sector (1 device) */
-#elif defined (CONFIG_P3M7448)
-#define CONFIG_ENV_SECT_SIZE 0x40000 /* two sectors (2 devices parallel */
-#endif
-#define CONFIG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
-#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
-
-/*-----------------------------------------------------------------------
- * DDR SDRAM
- *----------------------------------------------------------------------*/
-#define CONFIG_MV64460_ECC
-
-/*-----------------------------------------------------------------------
- * I2C
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed default */
-
-/* I2C RTC */
-#define CONFIG_RTC_M41T11 1
-#define CONFIG_SYS_I2C_RTC_ADDR 0x68
-#define CONFIG_SYS_M41T11_BASE_YEAR 1900 /* play along with linux */
-
-/*-----------------------------------------------------------------------
- * PCI stuff
- *----------------------------------------------------------------------*/
-#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */
-#define PCI_HOST_FORCE 1 /* configure as pci host */
-#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
-
-#undef CONFIG_PCI /* include pci support */
-#ifdef CONFIG_PCI
-#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */
-#define CONFIG_PCI_PNP /* do pci plug-and-play */
-#define CONFIG_PCI_SCAN_SHOW /* show devices on bus */
-#endif /* CONFIG_PCI */
-
-/* PCI MEMORY MAP section */
-#define CONFIG_SYS_PCI0_MEM_BASE 0x80000000
-#define CONFIG_SYS_PCI0_MEM_SIZE _128M
-#define CONFIG_SYS_PCI1_MEM_BASE 0x88000000
-#define CONFIG_SYS_PCI1_MEM_SIZE _128M
-
-#define CONFIG_SYS_PCI0_0_MEM_SPACE (CONFIG_SYS_PCI0_MEM_BASE)
-#define CONFIG_SYS_PCI1_0_MEM_SPACE (CONFIG_SYS_PCI1_MEM_BASE)
-
-/* PCI I/O MAP section */
-#define CONFIG_SYS_PCI0_IO_BASE 0xfa000000
-#define CONFIG_SYS_PCI0_IO_SIZE _16M
-#define CONFIG_SYS_PCI1_IO_BASE 0xfb000000
-#define CONFIG_SYS_PCI1_IO_SIZE _16M
-
-#define CONFIG_SYS_PCI0_IO_SPACE (CONFIG_SYS_PCI0_IO_BASE)
-#define CONFIG_SYS_PCI0_IO_SPACE_PCI 0x00000000
-#define CONFIG_SYS_PCI1_IO_SPACE (CONFIG_SYS_PCI1_IO_BASE)
-#define CONFIG_SYS_PCI1_IO_SPACE_PCI 0x00000000
-
-#define CONFIG_SYS_ISA_IO_BASE_ADDRESS (CONFIG_SYS_PCI0_IO_BASE)
-#define CONFIG_SYS_PCI_IDSEL 0x30
-
-#undef CONFIG_BOOTARGS
-#define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
- "netdev=eth0\0" \
- "nfsargs=setenv bootargs root=/dev/nfs rw " \
- "nfsroot=${serverip}:${rootpath}\0" \
- "ramargs=setenv bootargs root=/dev/ram rw\0" \
- "addip=setenv bootargs ${bootargs} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
- ":${hostname}:${netdev}:off panic=1\0" \
- "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
- "flash_nfs=run nfsargs addip addtty;" \
- "bootm ${kernel_addr}\0" \
- "flash_self=run ramargs addip addtty;" \
- "bootm ${kernel_addr} ${ramdisk_addr}\0" \
- "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
- "bootm\0" \
- "rootpath=/opt/eldk/ppc_6xx\0" \
- "u-boot=p3mx/u-boot/u-boot.bin\0" \
- "load=tftp 100000 ${u-boot}\0" \
- "update=protect off fff00000 fff3ffff;era fff00000 fff3ffff;" \
- "cp.b 100000 fff00000 40000;" \
- "setenv filesize;saveenv\0" \
- "upd=run load update\0" \
- "serverip=11.0.0.152\0"
-
-#if defined (CONFIG_P3M750)
-#define CONFIG_EXTRA_ENV_SETTINGS \
- CONFIG_EXTRA_ENV_SETTINGS_COMMON \
- "hostname=p3m750\0" \
- "bootfile=/tftpboot/p3mx/vxWorks.st\0" \
- "kernel_addr=fc000000\0" \
- "ramdisk_addr=fc180000\0" \
- "vxfile=p3m750/vxWorks\0" \
- "vxuser=ddg\0" \
- "vxpass=ddg\0" \
- "vxtarget=target\0" \
- "vxflags=0x8\0" \
- "vxargs=setenv bootargs mgi(0,0)host:${vxfile} h=${serverip} " \
- "e=${ipaddr} u=${vxuser} pw=${vxpass} tn=${vxtarget} " \
- "f=${vxflags}\0"
-#elif defined (CONFIG_P3M7448)
-#define CONFIG_EXTRA_ENV_SETTINGS \
- CONFIG_EXTRA_ENV_SETTINGS_COMMON \
- "hostname=p3m7448\0"
-#endif
-
-#if defined (CONFIG_P3M750)
-#define CONFIG_BOOTCOMMAND "tftp;run vxargs;bootvx"
-#elif defined (CONFIG_P3M7448)
-#define CONFIG_BOOTCOMMAND " "
-#endif
-
-#define CONFIG_BOOTDELAY 3 /* autoboot after 5 seconds */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_SDRAM
-
-
-/*-----------------------------------------------------------------------
- * Miscellaneous configurable options
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_HUSH_PARSER
-
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x08000000 /* default load address */
-
-#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
-#define CONFIG_LOOPW 1 /* enable loopw command */
-#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
-#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
-#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
-
-/*-----------------------------------------------------------------------
- * Marvell MV64460 config settings
- *----------------------------------------------------------------------*/
-/* Reset values for Port behavior (8bit/ 32bit, etc.) only corrected device width */
-#if defined (CONFIG_P3M750)
-#define CONFIG_SYS_BOOT_PAR 0x8FDFF87F /* 16 bit flash, disable burst*/
-#elif defined (CONFIG_P3M7448)
-#define CONFIG_SYS_BOOT_PAR 0x8FEFFFFF /* 32 bit flash, burst enabled */
-#endif
-
-/*
- * MPP[0] Serial Port 0 TxD TxD OUT Connected to P14 (buffered)
- * MPP[1] Serial Port 0 RxD RxD IN Connected to P14 (buffered)
- * MPP[2] NC
- * MPP[3] Serial Port 1 TxD TxD OUT Connected to P14 (buffered)
- * MPP[4] PCI Monarch# GPIO IN Connected to P12
- * MPP[5] Serial Port 1 RxD RxD IN Connected to P14 (buffered)
- * MPP[6] PMC Carrier Interrupt 0 Int IN Connected to P14
- * MPP[7] PMC Carrier Interrupt 1 Int IN Connected to P14
- * MPP[8] Reserved Do not use
- * MPP[9] Reserved Do not use
- * MPP[10] Reserved Do not use
- * MPP[11] Reserved Do not use
- * MPP[12] Phy 0 Interrupt Int IN
- * MPP[13] Phy 1 Interrupt Int IN
- * MPP[14] NC
- * MPP[15] NC
- * MPP[16] PCI Interrupt C Int IN Connected to P11
- * MPP[17] PCI Interrupt D Int IN Connected to P11
- * MPP[18] Watchdog NMI# GPIO IN Connected to MPP[24]
- * MPP[19] Watchdog Expired# WDE OUT Connected to rst logic
- * MPP[20] Watchdog Status WD_STS IN Read back of rst by watchdog
- * MPP[21] NC
- * MPP[22] GP LED Green GPIO OUT
- * MPP[23] GP LED Red GPIO OUT
- * MPP[24] Watchdog NMI# Int OUT
- * MPP[25] NC
- * MPP[26] NC
- * MPP[27] PCI Interrupt A Int IN Connected to P11
- * MPP[28] NC
- * MPP[29] PCI Interrupt B Int IN Connected to P11
- * MPP[30] Module reset GPIO OUT Board reset
- * MPP[31] PCI EReady GPIO IN Connected to P12
- */
-#define CONFIG_SYS_MPP_CONTROL_0 0x00303022
-#define CONFIG_SYS_MPP_CONTROL_1 0x00000000
-#define CONFIG_SYS_MPP_CONTROL_2 0x00004000
-#define CONFIG_SYS_MPP_CONTROL_3 0x00000004
-#define CONFIG_SYS_GPP_LEVEL_CONTROL 0x280730D0
-
-/*----------------------------------------------------------------------
- * Initial BAT mappings
- */
-
-/* NOTES:
- * 1) GUARDED and WRITE_THRU not allowed in IBATS
- * 2) CACHEINHIBIT and WRITETHROUGH not allowed together in same BAT
- */
-/* SDRAM */
-#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_GUARDEDSTORAGE | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
-
-/* init ram */
-#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_256K | BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
-#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
-
-/* PCI0, PCI1 in one BAT */
-#define CONFIG_SYS_IBAT2L BATL_NO_ACCESS
-#define CONFIG_SYS_IBAT2U CONFIG_SYS_DBAT2U
-#define CONFIG_SYS_DBAT2L (CONFIG_SYS_PCI0_MEM_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT2U (CONFIG_SYS_PCI0_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-
-/* GT regs, bootrom, all the devices, PCI I/O */
-#define CONFIG_SYS_IBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW)
-#define CONFIG_SYS_IBAT3U (CONFIG_SYS_MISC_REGION_BASE | BATU_VS | BATU_VP | BATU_BL_256M)
-#define CONFIG_SYS_DBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
-
-#define CONFIG_SYS_IBAT4L (CONFIG_SYS_SDRAM1_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT4U (CONFIG_SYS_SDRAM1_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT4L (CONFIG_SYS_SDRAM1_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U
-
-/* set rest out of range for Linux !!!!!!!!!!! */
-
-/* IBAT5 and DBAT5 */
-#define CONFIG_SYS_IBAT5L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT5U (0x20000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT5L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U
-
-/* IBAT6 and DBAT6 */
-#define CONFIG_SYS_IBAT6L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT6U (0x20000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT6L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U
-
-/* IBAT7 and DBAT7 */
-#define CONFIG_SYS_IBAT7L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT7U (0x20000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT7L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8<<20) /* Initial Memory map for Linux */
-#define CONFIG_SYS_VXWORKS_MAC_PTR 0x42010000 /* use some memory in SRAM that's not used!!! */
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
-/*-----------------------------------------------------------------------
- * L2CR setup -- make sure this is right for your board!
- * look in include/mpc74xx.h for the defines used here
- */
-#define CONFIG_SYS_L2
-
-#if defined (CONFIG_750CX) || defined (CONFIG_750FX)
-#define L2_INIT 0
-#else
-#define L2_INIT (L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \
- L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT)
-#endif
-
-#define L2_ENABLE (L2_INIT | L2CR_L2E)
-
-#ifndef __ASSEMBLY__
-#include <../board/Marvell/include/core.h>
-#endif
-
-#endif /* __CONFIG_H */