* Patch by Dave Peverley, 30 Apr 2004:

  Add support for OMAP730 Perseus2 Development board

* Patch by Alan J. Luse, 29 Apr 2004:
  Fix flash chip-select (OR0) option register setting on FADS boards.

* Patch by Alan J. Luse, 29 Apr 2004:
  Report MII network speed and duplex setting properly when
  auto-negotiate is not enabled.

* Patch by Jarrett Redd, 29 Apr 2004:
  Fix hang on reset on Ocotea board due to flash in wrong mode.

1 files changed, 287 insertions, 0 deletions

diff --git a/include/configs/omap730.h b/include/configs/omap730.h
new file mode 100644
index 0000000..5fbbeb0
--- /dev/null
+++ b/include/configs/omap730.h
@@ -0,0 +1,287 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ *   OMAP730 hardware map
+ *
+ * Copyright (C) 2004 MPC-Data Limited. (http://www.mpc-data.co.uk)
+ * Author: MPC-Data Limited
+ *	   Dave Peverley
+ *
+ *  This program is free software; you can redistribute	 it and/or modify it
+ *  under  the terms of	 the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the	License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
+ *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
+ *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+
+#ifndef __INCLUDED_OMAP730_H
+#define __INCLUDED_OMAP730_H
+
+#include <asm/arch/sizes.h>
+
+
+
+
+/***************************************************************************
+ * OMAP730 Configuration Registers
+ **************************************************************************/
+
+#define PERSEUS2_MPU_DEV_ID               ((unsigned int)(0xFFFE1000))
+#define PERSEUS2_GSM_DEV_ID0              ((unsigned int)(0xFFFE1000))
+#define PERSEUS2_GDM_DEV_ID1              ((unsigned int)(0xFFFE1002))
+#define DSP_CONF                          ((unsigned int)(0xFFFE1004))
+#define PERSEUS2_MPU_DIE_ID0              ((unsigned int)(0xFFFE1008))
+#define GSM_ASIC_CONF                     ((unsigned int)(0xFFFE1008))
+#define PERSEUS2_MPU_DIE_ID1              ((unsigned int)(0xFFFE100C))
+#define PERSEUS2_MODE1                    ((unsigned int)(0xFFFE1010))
+#define PERSEUS2_GSM_DIE_ID0              ((unsigned int)(0xFFFE1010))
+#define PERSEUS2_GSM_DIE_ID1              ((unsigned int)(0xFFFE1012))
+#define PERSEUS2_MODE2                    ((unsigned int)(0xFFFE1014))
+#define PERSEUS2_GSM_DIE_ID2              ((unsigned int)(0xFFFE1014))
+#define PERSEUS2_GSM_DIE_ID3              ((unsigned int)(0xFFFE1016))
+#define PERSEUS2_ANALOG_CELLS_CONF        ((unsigned int)(0xFFFE1018))
+#define SPECCTL                           ((unsigned int)(0xFFFE101C))
+#define SPARE1                            ((unsigned int)(0xFFFE1020))
+#define SPARE2                            ((unsigned int)(0xFFFE1024))
+#define GSM_PBG_IRQ                       ((unsigned int)(0xFFFE1028))
+#define DMA_REQ_CONF                      ((unsigned int)(0xFFFE1030))
+#define PE_CONF_NO_DUAL                   ((unsigned int)(0xFFFE1060))
+#define PERSEUS2_IO_CONF0                 ((unsigned int)(0xFFFE1070))
+#define PERSEUS2_IO_CONF1                 ((unsigned int)(0xFFFE1074))
+#define PERSEUS2_IO_CONF2                 ((unsigned int)(0xFFFE1078))
+#define PERSEUS2_IO_CONF3                 ((unsigned int)(0xFFFE107C))
+#define PERSEUS2_IO_CONF4                 ((unsigned int)(0xFFFE1080))
+#define PERSEUS2_IO_CONF5                 ((unsigned int)(0xFFFE1084))
+#define PERSEUS2_IO_CONF6                 ((unsigned int)(0xFFFE1088))
+#define PERSEUS2_IO_CONF7                 ((unsigned int)(0xFFFE108C))
+#define PERSEUS2_IO_CONF8                 ((unsigned int)(0xFFFE1090))
+#define PERSEUS2_IO_CONF9                 ((unsigned int)(0xFFFE1094))
+#define PERSEUS2_IO_CONF10                ((unsigned int)(0xFFFE1098))
+#define PERSEUS2_IO_CONF11                ((unsigned int)(0xFFFE109C))
+#define PERSEUS2_IO_CONF12                ((unsigned int)(0xFFFE10A0))
+#define PERSEUS2_IO_CONF13                ((unsigned int)(0xFFFE10A4))
+#define PERSEUS_PCC_CONF_REG              ((unsigned int)(0xFFFE10B4))
+#define BIST_STATUS_INTERNAL              ((unsigned int)(0xFFFE10B8))
+#define BIST_CONTROL                      ((unsigned int)(0xFFFE10C0))
+#define BOOT_ROM_REG                      ((unsigned int)(0xFFFE10C4))
+#define PRODUCTION_ID_REG                 ((unsigned int)(0xFFFE10C8))
+#define BIST_SECROM_SIGNATURE1_INTERNAL   ((unsigned int)(0xFFFE10D0))
+#define BIST_SECROM_SIGNATURE2_INTERNAL   ((unsigned int)(0xFFFE10D4))
+#define BIST_CONTROL_2                    ((unsigned int)(0xFFFE10D8))
+#define DEBUG1                            ((unsigned int)(0xFFFE10E0))
+#define DEBUG2                            ((unsigned int)(0xFFFE10E4))
+#define DEBUG_DMA_IRQ                     ((unsigned int)(0xFFFE10E8))
+
+
+
+
+/***************************************************************************
+ * OMAP730 EMIFS Registers                                       (TRM 2.5.7)
+ **************************************************************************/
+
+#define TCMIF_BASE                 0xFFFECC00
+
+#define EMIFS_LRUREG               (TCMIF_BASE + 0x04)
+#define EMIFS_CONFIG               (TCMIF_BASE + 0x0C)
+#define FLASH_CFG_0                (TCMIF_BASE + 0x10)
+#define FLASH_CFG_1                (TCMIF_BASE + 0x14)
+#define FLASH_CFG_2                (TCMIF_BASE + 0x18)
+#define FLASH_CFG_3                (TCMIF_BASE + 0x1C)
+#define FL_CFG_DYN_WAIT            (TCMIF_BASE + 0x40)
+#define EMIFS_TIMEOUT1_REG         (TCMIF_BASE + 0x28)
+#define EMIFS_TIMEOUT2_REG         (TCMIF_BASE + 0x2C)
+#define EMIFS_TIMEOUT3_REG         (TCMIF_BASE + 0x30)
+#define EMIFS_ABORT_ADDR           (TCMIF_BASE + 0x44)
+#define EMIFS_ABORT_TYPE           (TCMIF_BASE + 0x48)
+#define EMIFS_ABORT_TOUT           (TCMIF_BASE + 0x4C)
+#define FLASH_ACFG_0_1             (TCMIF_BASE + 0x50)
+#define FLASH_ACFG_1_1             (TCMIF_BASE + 0x54)
+#define FLASH_ACFG_2_1             (TCMIF_BASE + 0x58)
+#define FLASH_ACFG_3_1             (TCMIF_BASE + 0x5C)
+
+
+
+/***************************************************************************
+ * OMAP730 Interrupt handlers
+ **************************************************************************/
+
+#define OMAP_IH1_BASE		0xFFFECB00     /* MPU Level 1 IRQ handler */
+#define OMAP_IH2_BASE           0xfffe0000
+
+
+
+/***************************************************************************
+ * OMAP730 Timers
+ *
+ * There are three general purpose OS timers in the 730 that can be 
+ * configured in autoreload or one-shot modes.
+ **************************************************************************/
+
+#define OMAP730_32kHz_TIMER_BASE  0xFFFB9000
+
+/* 32k Timer Registers */
+#define TIMER32k_CR               0x08
+#define TIMER32k_TVR              0x00
+#define TIMER32k_TCR              0x04
+
+/* 32k Timer Control Register definition */
+#define TIMER32k_TSS              (1<<0)
+#define TIMER32k_TRB              (1<<1)
+#define TIMER32k_INT              (1<<2)
+#define TIMER32k_ARL              (1<<3)
+
+/* MPU Timer base addresses  */
+#define OMAP730_MPUTIMER_BASE	0xfffec500
+#define OMAP730_MPUTIMER_OFF	0x00000100
+
+#define OMAP730_TIMER1_BASE	0xFFFEC500
+#define OMAP730_TIMER2_BASE	0xFFFEC600
+#define OMAP730_TIMER3_BASE	0xFFFEC700
+
+/* MPU Timer Register offsets */
+#define CNTL_TIMER	           0x00   /* MPU_CNTL_TIMER */
+#define LOAD_TIM	           0x04   /* MPU_LOAD_TIMER */
+#define READ_TIM	           0x08   /* MPU_READ_TIMER */
+
+/* MPU_CNTL_TIMER register bits */
+#define MPUTIM_FREE               (1<<6)
+#define MPUTIM_CLOCK_ENABLE       (1<<5)
+#define MPUTIM_PTV_MASK           (0x7<<PTV_BIT)
+#define MPUTIM_PTV_BIT            2
+#define MPUTIM_AR                 (1<<1)
+#define MPUTIM_ST                 (1<<0)
+
+
+
+/***************************************************************************
+ * OMAP730 GPIO
+ *
+ * The GPIO control is split over 6 register bases in the OMAP730 to allow
+ * access to all the (6 x 32) GPIO pins!
+ **************************************************************************/
+
+#define OMAP730_GPIO_BASE_1        0xFFFBC000
+#define OMAP730_GPIO_BASE_2        0xFFFBC800
+#define OMAP730_GPIO_BASE_3        0xFFFBD000
+#define OMAP730_GPIO_BASE_4        0xFFFBD800
+#define OMAP730_GPIO_BASE_5        0xFFFBE000
+#define OMAP730_GPIO_BASE_6        0xFFFBE800
+
+#define GPIO_DATA_INPUT            0x00
+#define GPIO_DATA_OUTPUT           0x04
+#define GPIO_DIRECTION_CONTROL     0x08
+#define GPIO_INTERRUPT_CONTROL     0x0C
+#define GPIO_INTERRUPT_MASK        0x10
+#define GPIO_INTERRUPT_STATUS      0x14
+
+#define GPIO_DATA_INPUT_1            ((unsigned int)(OMAP730_GPIO_BASE_1 + GPIO_DATA_INPUT))
+#define GPIO_DATA_OUTPUT_1           ((unsigned int)(OMAP730_GPIO_BASE_1 + GPIO_DATA_OUTPUT))
+#define GPIO_DIRECTION_CONTROL_1     ((unsigned int)(OMAP730_GPIO_BASE_1 + GPIO_DIRECTION_CONTROL))
+#define GPIO_INTERRUPT_CONTROL_1     ((unsigned int)(OMAP730_GPIO_BASE_1 + GPIO_INTERRUPT_CONTROL))
+#define GPIO_INTERRUPT_MASK_1        ((unsigned int)(OMAP730_GPIO_BASE_1 + GPIO_INTERRUPT_MASK))
+#define GPIO_INTERRUPT_STATUS_1      ((unsigned int)(OMAP730_GPIO_BASE_1 + GPIO_INTERRUPT_STATUS))
+
+#define GPIO_DATA_INPUT_2            ((unsigned int)(OMAP730_GPIO_BASE_2 + GPIO_DATA_INPUT))
+#define GPIO_DATA_OUTPUT_2           ((unsigned int)(OMAP730_GPIO_BASE_2 + GPIO_DATA_OUTPUT))
+#define GPIO_DIRECTION_CONTROL_2     ((unsigned int)(OMAP730_GPIO_BASE_2 + GPIO_DIRECTION_CONTROL))
+#define GPIO_INTERRUPT_CONTROL_2     ((unsigned int)(OMAP730_GPIO_BASE_2 + GPIO_INTERRUPT_CONTROL))
+#define GPIO_INTERRUPT_MASK_2        ((unsigned int)(OMAP730_GPIO_BASE_2 + GPIO_INTERRUPT_MASK))
+#define GPIO_INTERRUPT_STATUS_2      ((unsigned int)(OMAP730_GPIO_BASE_2 + GPIO_INTERRUPT_STATUS))
+
+#define GPIO_DATA_INPUT_3            ((unsigned int)(OMAP730_GPIO_BASE_3 + GPIO_DATA_INPUT))
+#define GPIO_DATA_OUTPUT_3           ((unsigned int)(OMAP730_GPIO_BASE_3 + GPIO_DATA_OUTPUT))
+#define GPIO_DIRECTION_CONTROL_3     ((unsigned int)(OMAP730_GPIO_BASE_3 + GPIO_DIRECTION_CONTROL))
+#define GPIO_INTERRUPT_CONTROL_3     ((unsigned int)(OMAP730_GPIO_BASE_3 + GPIO_INTERRUPT_CONTROL))
+#define GPIO_INTERRUPT_MASK_3        ((unsigned int)(OMAP730_GPIO_BASE_3 + GPIO_INTERRUPT_MASK))
+#define GPIO_INTERRUPT_STATUS_3      ((unsigned int)(OMAP730_GPIO_BASE_3 + GPIO_INTERRUPT_STATUS))
+
+#define GPIO_DATA_INPUT_4            ((unsigned int)(OMAP730_GPIO_BASE_4 + GPIO_DATA_INPUT))
+#define GPIO_DATA_OUTPUT_4           ((unsigned int)(OMAP730_GPIO_BASE_4 + GPIO_DATA_OUTPUT))
+#define GPIO_DIRECTION_CONTROL_4     ((unsigned int)(OMAP730_GPIO_BASE_4 + GPIO_DIRECTION_CONTROL))
+#define GPIO_INTERRUPT_CONTROL_4     ((unsigned int)(OMAP730_GPIO_BASE_4 + GPIO_INTERRUPT_CONTROL))
+#define GPIO_INTERRUPT_MASK_4        ((unsigned int)(OMAP730_GPIO_BASE_4 + GPIO_INTERRUPT_MASK))
+#define GPIO_INTERRUPT_STATUS_4      ((unsigned int)(OMAP730_GPIO_BASE_4 + GPIO_INTERRUPT_STATUS))
+
+#define GPIO_DATA_INPUT_5            ((unsigned int)(OMAP730_GPIO_BASE_5 + GPIO_DATA_INPUT))
+#define GPIO_DATA_OUTPUT_5           ((unsigned int)(OMAP730_GPIO_BASE_5 + GPIO_DATA_OUTPUT))
+#define GPIO_DIRECTION_CONTROL_5     ((unsigned int)(OMAP730_GPIO_BASE_5 + GPIO_DIRECTION_CONTROL))
+#define GPIO_INTERRUPT_CONTROL_5     ((unsigned int)(OMAP730_GPIO_BASE_5 + GPIO_INTERRUPT_CONTROL))
+#define GPIO_INTERRUPT_MASK_5        ((unsigned int)(OMAP730_GPIO_BASE_5 + GPIO_INTERRUPT_MASK))
+#define GPIO_INTERRUPT_STATUS_5      ((unsigned int)(OMAP730_GPIO_BASE_5 + GPIO_INTERRUPT_STATUS))
+
+#define GPIO_DATA_INPUT_6            ((unsigned int)(OMAP730_GPIO_BASE_6 + GPIO_DATA_INPUT))
+#define GPIO_DATA_OUTPUT_6           ((unsigned int)(OMAP730_GPIO_BASE_6 + GPIO_DATA_OUTPUT))
+#define GPIO_DIRECTION_CONTROL_6     ((unsigned int)(OMAP730_GPIO_BASE_6 + GPIO_DIRECTION_CONTROL))
+#define GPIO_INTERRUPT_CONTROL_6     ((unsigned int)(OMAP730_GPIO_BASE_6 + GPIO_INTERRUPT_CONTROL))
+#define GPIO_INTERRUPT_MASK_6        ((unsigned int)(OMAP730_GPIO_BASE_6 + GPIO_INTERRUPT_MASK))
+#define GPIO_INTERRUPT_STATUS_6      ((unsigned int)(OMAP730_GPIO_BASE_6 + GPIO_INTERRUPT_STATUS))
+
+
+
+
+/***************************************************************************
+ * OMAP730 Watchdog timers
+ **************************************************************************/
+
+#define WDTIM_BASE                 0xFFFEC800
+#define WDTIM_CONTROL              (WDTIM_BASE + 0x00)    /* MPU_CNTL_TIMER */
+#define WDTIM_LOAD                 (WDTIM_BASE + 0x04)    /* MPU_LOAD_TIMER */
+#define WDTIM_READ                 (WDTIM_BASE + 0x04)    /* MPU_READ_TIMER */
+#define WDTIM_MODE                 (WDTIM_BASE + 0x08)    /* MPU_TIMER_MODE */
+
+
+
+
+/***************************************************************************
+ * OMAP730 Interrupt Registers
+ **************************************************************************/
+
+/* Interrupt Register offsets */
+
+#define IRQ_ITR                               0x00  
+#define IRQ_MIR                               0x04
+#define IRQ_SIR_IRQ                           0x10
+#define IRQ_SIR_FIQ                           0x14
+#define IRQ_CONTROL_REG                       0x18
+#define IRQ_ILR0                              0x1C  /* ILRx == ILR0 + (0x4 * x) */
+#define IRQ_SIR                               0x9C  /* a.k.a.IRQ_ISR */
+#define IRQ_GMIR                              0xA0
+
+#define REG_IHL1_MIR  (OMAP_IH1_BASE + IRQ_MIR)
+#define REG_IHL2_MIR  (OMAP_IH2_BASE + IRQ_MIR)
+
+
+/***************************************************************************
+ * OMAP730 Intersystem Communication Register                      (TRM 4.5)
+ **************************************************************************/
+ 
+ 
+#define ICR_BASE                   0xFFFBB800
+ 
+#define M_ICR                      (ICR_BASE + 0x00)
+#define G_ICR                      (ICR_BASE + 0x02)
+#define M_CTL                      (ICR_BASE + 0x04)
+#define G_CTL                      (ICR_BASE + 0x06)
+#define PM_BA                      (ICR_BASE + 0x0A)
+#define DM_BA                      (ICR_BASE + 0x0C)
+#define RM_BA                      (ICR_BASE + 0x0E)
+#define SSPI_TAS                   (ICR_BASE + 0x12)
+
+
+
+#endif /* ! __INCLUDED_OMAP730_H */